Zeitschrift: Advanced Engineering Materials

2024

Vogler, Jonas ; Schneiderman, Benjamin ; Yu, Zhenzhen ; Huber, Jakob ; Völkl, Rainer ; Glatzel, Uwe:
Compositionally Complex Alloy MnFeCoNiCu for Brazing Nickel-Based Superalloy Haynes 214.
In: Advanced Engineering Materials. Bd. 26 (2024) Heft 14 . - 2400747.
ISSN 1527-2648
DOI: https://doi.org/10.1002/adem.202400747

2022

Körber, Selina ; Fleck, Michael ; Völkl, Rainer ; Glatzel, Uwe:
Anisotropic Growth of the Primary Dendrite Arms in a Single-Crystal Thin-Walled Nickel-Based Superalloy.
In: Advanced Engineering Materials. Bd. 24 (2022) Heft 6 . - 2101332.
ISSN 1527-2648
DOI: https://doi.org/10.1002/adem.202101332

Ribeiro, Luiz F. B. ; Cunha, Ricardo S. ; de Noni Jr, Agenor ; Machado, Ricardo A. F. ; Motz, Günter ; González, Sergio Y. G.:
Flexible and Porous Nonwoven SiCN Ceramic Material via Electrospinning of an Optimized Silazane Solution.
In: Advanced Engineering Materials. Bd. 24 (2022) Heft 1 . - 2100321.
ISSN 1527-2648
DOI: https://doi.org/10.1002/adem.202100321

Dickes, Daniel ; Öztürk, Beyza ; Völkl, Rainer ; Galetz, Mathias ; Glatzel, Uwe:
Improving the Adhesion of a Hard Oxide Layer on Ti6Al4V by a Three-Step Thermal Oxidation Process.
In: Advanced Engineering Materials. Bd. 24 (2022) Heft 3 . - 2100864.
ISSN 1527-2648
DOI: https://doi.org/10.1002/adem.202100864

2019

Liensdorf, Tom ; Langhof, Nico ; Krenkel, Walter:
Mechanical properties of PEEK-Derived C/SiC Composites with Different Fiber Lengths.
In: Advanced Engineering Materials. Bd. 21 (2019) Heft 5 . - 1800835.
ISSN 1527-2648
DOI: https://doi.org/10.1002/adem.201800835

Wolff, Nadja ; Langhof, Nico ; Krenkel, Walter:
Oxidation Behavior of Alumina Fiber Reinforced SiCO Composites for a Co-Firing Process on Steel Pipes.
In: Advanced Engineering Materials. Bd. 21 (2019) Heft 6 . - 1900233.
ISSN 1527-2648
DOI: https://doi.org/10.1002/adem.201900233

2018

Richter, Christian ; Lehmann, Sebastian ; Böckler, Jens ; Willert-Porada, Monika ; Rosin, Andreas:
Combined Microwave and Laser Heating for Glazing of 8Y–ZrO₂ and 8Y–ZrO₂/ZrSiO₄–Composites.
In: Advanced Engineering Materials. Bd. 20 (2018) Heft 2 . - 1700912.
ISSN 1527-2648
DOI: https://doi.org/10.1002/adem.201700912

Kellner, Peter M. ; Völkl, Rainer ; Glatzel, Uwe:
Influence of Ingot and Powder Metallurgy Production Route on the Tensile Creep Behavior of Mo–9Si–8B Alloys with Additions of Al and Ge.
In: Advanced Engineering Materials. Bd. 20 (2018) Heft 1 . - 1700751.
ISSN 1527-2648
DOI: https://doi.org/10.1002/adem.201700751

2016

Stolze, Christian ; Janoschka, Tobias ; Schubert, Ulrich S. ; Müller, Frank A. ; Flauder, Stefan:
Directional Solidification with Constant Ice Front Velocity in the Ice-Templating Process.
In: Advanced Engineering Materials. Bd. 18 (2016) Heft 1 . - S. 111-120.
ISSN 1527-2648
DOI: https://doi.org/10.1002/adem.201500235

Bärwinkel, Stefanie ; Bahrami, Ronak ; Löbling, Tina I. ; Schmalz, Holger ; Müller, Axel H. E. ; Altstädt, Volker:
Polymer Foams Made of Immiscible Polymer Blends Compatibilized by Janus Particles : Effect of Compatibilization on Foam Morphology.
In: Advanced Engineering Materials. Bd. 18 (2016) Heft 5 . - S. 814-825.
ISSN 1527-2648
DOI: https://doi.org/10.1002/adem.201500387

2015

Reichert, Florian ; Langhof, Nico ; Krenkel, Walter:
Influence of Thermal Fiber Pretreatment on Microstructure and Mechanical Properties of C/C-SiC with Thermoplastic Polymer-Derived Matrices.
In: Advanced Engineering Materials. Bd. 17 (2015) Heft 8 . - S. 1119-1126.
ISSN 1527-2648
DOI: https://doi.org/10.1002/adem.201500193

Strößner, Johannes ; Terock, Michael ; Glatzel, Uwe:
Mechanical and Microstructural Investigation of Nickel Based Superalloy IN 718 Manufactured by Selective Laser Melting (SLM).
In: Advanced Engineering Materials. Bd. 17 (2015) Heft 8 . - S. 1099-1105.
ISSN 1527-2648
DOI: https://doi.org/10.1002/adem.201500158

Daoud, Haneen ; Manzoni, Anna M. ; Wanderka, Nelia ; Glatzel, Uwe:
Oxidation Behavior of Al₈Co₁₇Cr₁₇Cu₈Fe₁₇Ni₃₃, Al₂₃Co₁₅Cr₂₃Cu₈Fe₁₅Ni₁₅ and ‎Al₁₇Co₁₇Cr₁₇Cu₁₇Fe₁₇Ni₁₇ Compositionally Complex Alloys (High Entropy Alloys) at ‎Elevated Temperatures in Air.
In: Advanced Engineering Materials. Bd. 17 (2015) Heft 8 . - S. 1134-1141.
ISSN 1527-2648
DOI: https://doi.org/10.1002/adem.201500179

Mushongera, Leslie T. ; Fleck, Michael ; Kundin, Julia ; Querfurth, Frank ; Emmerich, Heike:
Phase-field study of anisotropic γ'-coarsening kinetics in Ni-base superalloys with varying Re and Ru contents.
In: Advanced Engineering Materials. Bd. 17 (2015) Heft 8 . - S. 1149-1157.
ISSN 1527-2648
DOI: https://doi.org/10.1002/adem.201500168

Kinzel, Svenja ; Gabel, Johannes ; Völkl, Rainer ; Glatzel, Uwe:
Reasons for Volume Contraction after Long-Term Annealing of Waspaloy.
In: Advanced Engineering Materials. Bd. 17 (2015) Heft 8 . - S. 1106-1112.
ISSN 1527-2648
DOI: https://doi.org/10.1002/adem.201500159

2014

Flores, Octavio ; Bordia, Rajendra K. ; Nestler, Daisy ; Motz, Günter ; Krenkel, Walter:
Ceramic Fibers Based on SiC and SiCN Systems : Current Research, Development and Commercial Status.
In: Advanced Engineering Materials. Bd. 16 (2014) Heft 6 . - S. 621-636.
ISSN 1527-2648
DOI: https://doi.org/10.1002/adem.201400069

2012

Leal-Egaña, Aldo ; Lang, Gregor ; Mauerer, Carolin ; Wickinghoff, Jasmin ; Weber, Michael ; Geimer, Stefan ; Scheibel, Thomas:
Interactions of Fibroblasts with Different Morphologies Made of an Engineered Spider Silk Protein.
In: Advanced Engineering Materials. Bd. 14 (2012) Heft 3 . - B67-B75.
ISSN 1527-2648
DOI: https://doi.org/10.1002/adem.201180072

2011

Keller, Thomas F. ; Engelhardt, Hannes ; Adam, Peter ; Galetz, Mathias ; Glatzel, Uwe ; Jandt, Klaus D.:
Near-Surface Microstructural Reorganization of UHMWPE under Cyclic Load : A Pilot Study.
In: Advanced Engineering Materials. Bd. 13 (2011) Heft 12 . - B476-B482.
ISSN 1527-2648
DOI: https://doi.org/10.1002/adem.201180058

2007

Galetz, Mathias ; Goetz, C. ; Adam, Peter ; Glatzel, Uwe:
Hysteretic Heating During Cyclic Loading of Medical Grade Ultra High Molecular Weight Polyethylene (UHMWPE).
In: Advanced Engineering Materials. Bd. 9 (2007) Heft 12 . - S. 1089-1096.
ISSN 1527-2648
DOI: https://doi.org/10.1002/adem.200700274

Pajkić, Zeljko ; Willert-Porada, Monika:
Synthesis and Charakterization of Alumina Microtubes in a Template Process from Short Carbon Fibers.
In: Advanced Engineering Materials. Bd. 9 (2007) Heft 5 . - S. 381-384.
ISSN 1527-2648
DOI: https://doi.org/10.1002/adem.200700056

2005

Roth, Christina ; Benker, Nathalie ; Mazurek, Marian ; Scheiba, Frieder ; Fuess, Hartmut:
Development of an In-Situ Cell for X-ray Absorption Measurements During Fuel Cell Operation.
In: Advanced Engineering Materials. Bd. 7 (2005) Heft 10 . - S. 952-956.
ISSN 1527-2648
DOI: https://doi.org/10.1002/adem.200500122

2003

Hofenauer, Andreas ; Treusch, Olaf ; Tröger, Fritz ; Wegener, Gerd ; Fromm, Jörg ; Gahr, Michaela ; Schmidt, Jens ; Krenkel, Walter:
Dense Reaction Infiltrated Silicon/Silicon Carbide Ceramics Derived from Wood Based Composites.
In: Advanced Engineering Materials. Bd. 5 (2003) Heft 11 . - S. 794-799.
ISSN 1527-2648
DOI: https://doi.org/10.1002/adem.200300400

2002

Krenkel, Walter ; Heidenreich, Bernhard ; Renz, Ralph:
C/C-SiC Composites for Advanced Friction Systems.
In: Advanced Engineering Materials. Bd. 4 (2002) Heft 7 . - S. 427-436.
ISSN 1527-2648
DOI: https://doi.org/10.1002/1527-2648(20020717)4:7<427::AID-ADEM427>3.0.CO;2-C

Köhler, Anna ; Wilson, Joanne S. ; Friend, Richard H.:
Fluorescence and Phosphorescence in Organic Materials.
In: Advanced Engineering Materials. Bd. 4 (2002) Heft 7 . - S. 453-459.
ISSN 1527-2648
DOI: https://doi.org/10.1002/1527-2648(20020717)4:7<453::AID-ADEM453>3.0.CO;2-G