Zeitschrift: Metals

B

Bernauer, Christian ; Grohmann, Sandra ; Angermann, Philipp ; Dickes, Daniel ; Holzberger, Florian ; Amend, Pierre ; Zäh, Michael F.:
Investigation of the Cause-Effect Relationships between the Exothermic Reaction and the Microstructures of Reactive Ni-Al Particles Produced by High Energy Planetary Ball Milling.
In: Metals. Bd. 11 (2021) Heft 6 . - 876.
ISSN 2075-4701
DOI: https://doi.org/10.3390/met11060876

G

Glatzel, Uwe ; Schleifer, Felix ; Gadelmeier, Christian ; Krieg, Fabian ; Müller, Moritz ; Mosbacher, Mike ; Völkl, Rainer:
Quantification of Solid Solution Strengthening and Internal Stresses through Creep Testing of Ni-Containing Single Crystals at 980°C.
In: Metals. Bd. 11 (2021) Heft 7 . - 1130.
ISSN 2075-4701
DOI: https://doi.org/10.3390/met11071130

Gadelmeier, Christian ; Haas, Sebastian ; Lienig, Tim ; Manzoni, Anna M. ; Feuerbacher, Michael ; Glatzel, Uwe:
Temperature Dependent Solid Solution Strengthening in the High Entropy Alloy CrMnFeCoNi in Single Crystalline State.
In: Metals. Bd. 10 (2020) Heft 11 . - 1412.
ISSN 2075-4701
DOI: https://doi.org/10.3390/met10111412

K

Körber, Selina ; Wolff-Goodrich, Silas ; Völkl, Rainer ; Glatzel, Uwe:
Effect of Wall Thickness and Surface Conditions on Creep Behavior of a Single-Crystal Ni-Based Superalloy.
In: Metals. Bd. 12 (2022) Heft 7 . - 1081.
ISSN 2075-4701
DOI: https://doi.org/10.3390/met12071081

Kirschen, Marcus:
Visualization of Slag Data for Efficient Monitoring and Improvement of Steelmaking Slag Operation in Electric Arc Furnaces, with a Focus on MgO Saturation.
In: Metals. Bd. 11 (2021) Heft 1 . - S. 17-27.
ISSN 2075-4701
DOI: https://doi.org/10.3390/met11010017

Kirschen, Marcus ; Jung, In-Ho ; Hackl, Gernot:
Phase equilibrium diagram for EAF slag optimization in high alloyed Chromium stainless steelmaking.
In: Metals. Bd. 10 (2020) Heft 6 . - 826.
ISSN 2075-4701
DOI: https://doi.org/10.3390/met10060826

P

Pfizenmaier, Petra ; Ulrich, Anke Silvia ; Galetz, Mathias C. ; Glatzel, Uwe:
Tensile creep properties of Cr-Si Alloys at 980 °C in air : Influence of Ge and Mo addition.
In: Metals. Bd. 11 (2021) Heft 7 . - 1072.
ISSN 2075-4701
DOI: https://doi.org/10.3390/met11071072

S

Scherm, Florian ; Daoud, Haneen ; Glatzel, Uwe:
Influence of Printing Strategies on the Microstructure and Mechanical Properties of Additively Manufactured Alloy 625 Using Directed Energy Deposition (DED-LB-p).
In: Metals. Bd. 14 (2024) Heft 9 . - 1041.
ISSN 2075-4701
DOI: https://doi.org/10.3390/met14091041