Literatur vom gleichen Autor/der gleichen Autor*in
plus bei Google Scholar

Bibliografische Daten exportieren
 

The effect of side walls on the stability of falling films

Titelangaben

Mohamed, Hammam ; Sesterhenn, Jörn ; Biancofiore, Luca:
The effect of side walls on the stability of falling films.
In: Journal of Fluid Mechanics. Bd. 964 (2023) . - A40.
ISSN 0022-1120
DOI: https://doi.org/10.1017/jfm.2023.391

Volltext

Link zum Volltext (externe URL): Volltext

Abstract

We study the influence of side walls on the stability of falling liquid films. We combine a temporal biglobal stability analysis based on the linearised Navier–Stokes equations with experiments measuring the spatial growth rate of sinusoidal waves flowing downstream an inclined channel. Very good agreement was found when comparing the theoretical and experimental results. Strong lateral confinement of the channel stabilises the flow. In the wavenumber-Reynolds number space, the instability region experiences a fragmentation due to selective damping of moderate wavenumbers. For this range of parameters, the three-dimensional confined problem shows several prominent stability modes which are classified into two categories, the well-known Kapitza hydrodynamic instability mode (H-mode) and a new unstable mode, we refer to it as wall-mode (W-mode). The two mode types are stabilised differently, where the H-modes are stabilised at small wavenumbers, while the W-modes experience stabilisation at high wavenumbers, and at sufficiently small channel widths, only the W-mode is observed. The reason behind the unique H-modes stabilisation is that they become analogous to waveguide modes, which can not propagate below a certain cut-off wavenumber. The spatial structure of the eigenmodes experiences significant restructuring at wavenumbers smaller than the most damped wavenumber. The mode switching preserves the spatial symmetry of the unstable mode.

Weitere Angaben

Publikationsform: Artikel in einer Zeitschrift
Begutachteter Beitrag: Ja
Keywords: thin films
Institutionen der Universität: Fakultäten > Fakultät für Ingenieurwissenschaften > Lehrstuhl Technische Mechanik und Strömungsmechanik > Lehrstuhl Technische Mechanik und Strömungsmechanik - Univ.-Prof. Dr. Jörn Lothar Sesterhenn
Fakultäten
Fakultäten > Fakultät für Ingenieurwissenschaften
Fakultäten > Fakultät für Ingenieurwissenschaften > Lehrstuhl Technische Mechanik und Strömungsmechanik
Titel an der UBT entstanden: Ja
Themengebiete aus DDC: 600 Technik, Medizin, angewandte Wissenschaften > 620 Ingenieurwissenschaften
Eingestellt am: 30 Mär 2024 22:00
Letzte Änderung: 02 Apr 2024 13:00
URI: https://eref.uni-bayreuth.de/id/eprint/89114