ERef Bayreuth

Subject area: DDC
600 Technology, medicine, applied sciences

DDC (9667)
- 600 Technology, medicine, applied sciences (9667)
  - 600 Technology (1071)
  - 610 Medicine and health (1930)
  - 620 Engineering (7195)
  - 630 Agriculture (81)
  - 640 Home and family management (17)
  - 650 Management, public relations (97)
  - 660 Chemical engineering (749)
  - 670 Manufacturing (128)
  - 680 Manufacture for specific uses (44)
  - 690 Building, construction (30)

Jump to: 2025 | 2024 | 2023 | 2022 | 2021 | 2020 | 2019 | 2018 | 2017 | 2016 | 2015 | 2014 | 2013 | 2012 | 2011 | 2010 | 2009 | 2008 | 2007 | 2006 | 2005 | 2004 | 2003 | 2002 | 2001 | 2000 | 1999 | 1998 | 1997 | 1996 | 1995 | 1994 | 1993 | 1992 | 1991 | 1990 | 1989 | 1988 | 1987

Number of items at this level: 1869.

2025

von Schau, Natascha ; Betz, Constanze ; Weber, Anna ; Bader, Alisa ; König, Laura M. ; Bartelmeß, Tina ; Al Masri, Mirna ; Hofmann, Reiner ; Haderer, Marika:
HAPpEN: A pragmatic general practitioner-centered obesitymanagement trial in rural Germany integrating multimodal lifestyle interventions.
Research Square , 2025
DOI: https://doi.org/10.21203/rs.3.rs-6540216/v1

Niotis, Aristeidis ; Chudej, Kurt:
Mathematical Analysis of a Compartment Model.
In: Simulation Notes Europe. Vol. 35 (March 2025) Issue 1 . - pp. 17-24.
DOI: https://doi.org/10.11128/sne.35.tn.10723

Hoffmann, Sascha W. ; Schierbauer, Janis ; Zimmermann, Paul ; Voit, Thomas ; Grothoff, Auguste Maria ; Wachsmuth, Nadine ; Rössler, Andreas ; Niedrist, Tobias ; Lackner, Helmut K. ; Moser, Othmar:
Associations Between Clinical Inflammatory Risk Markers, Body Composition, Heart Rate Variability, and Accelerometer-Assessed Physical Activity in University Students with Overweight and Obesity.
In: Sensors. Vol. 25 (2025) Issue 5 . - 1510.
DOI: https://doi.org/10.3390/s25051510

Meyer, Leif O. ; Jérôme, Valérie ; Freitag, Ruth:
Custom FDM-based bioprinter with heated nozzle : optimizing slicer settings for precision printing using a print quality index.
In: Biomedical Materials. Vol. 20 (2025) . - 035030.
DOI: https://doi.org/10.1088/1748-605X/add230

Raßmann, Nadine ; Trippmacher, Steffen ; Specht, Agnes ; Theis, Katinka ; Rößler, Tamino ; Wohlrab, Sebastian ; Kellnberger, Richard ; Salehi, Sahar ; Bargel, Hendrik ; Helfricht, Nicolas ; Albrecht, Krystyna ; Scheibel, Thomas ; Groll, Jürgen ; Gekle, Stephan ; Papastavrou, Georg:
Determining the Elastic Modulus of Microgel Particles by Nanoindentation.
In: ACS Applied Nano Materials. Vol. 8 (2025) Issue 11 . - pp. 5383-5398.
DOI: https://doi.org/10.1021/acsanm.4c06964

Ohnemüller, Gregor ; Beller, Marie ; Rosemann, Bernd ; Döpper, Frank:
Disassembly and Its Obstacles: Challenges Facing Remanufacturers of Lithium-Ion Traction Batteries.
In: Processes. Vol. 13 (2025) Issue 1 . - 123.
DOI: https://doi.org/10.3390/pr13010123

Maneira, Carla ; Chamas, Alexandre ; Lackner, Gerald:
Engineering Saccharomyces cerevisiae for medical applications.
In: Microbial Cell Factories. Vol. 24 (2025) . - 12.
DOI: https://doi.org/10.1186/s12934-024-02625-5

Grenzfurtner, Wolfgang ; Pichler, Elena ; Gronalt, Manfred:
Increasing the output of mixed-model assembly lines for industrialised housebuilding : learnings from a case-based simulation study.
In: International Journal of Production Research. Vol. 63 (2025) Issue 9 . - pp. 3192-3207.
DOI: https://doi.org/10.1080/00207543.2024.2430453

Ulrich, Anke Silvia ; Pfizenmaier, Petra ; Kerbstadt, Michael ; Pelchen, Lucas ; Solimani, Ali ; Glatzel, Uwe ; Galetz, Mathias Christian:
Partitioning and Coarsening Dynamics of Precipitate-Strengthened Cr-Si Alloys : The Role of Ge, Pt, and Mo.
In: Advanced Engineering Materials. (2025) . - 2401818.
DOI: https://doi.org/10.1002/adem.202401818

Loacker, Philipp ; Pöchtrager, Siegfried ; Fikar, Christian ; Grenzfurtner, Wolfgang:
Process mining-enhanced quality management in food processing industries.
In: International Journal of Productivity and Performance Management. Vol. 74 (2025) Issue 4 . - pp. 1326-1346.
DOI: https://doi.org/10.1108/IJPPM-06-2024-0377

Ogorure, Oreva Joe:
Sustainable Energy Conversion in Multigeneration Power Plant Configuration for Climate Change Mitigation.
Bayreuth , 2025 . - XV, 125 p.
( Doctoral thesis, 2024 , Universität Bayreuth, Fakultät für Ingenieurwissenschaften)
DOI: https://doi.org/10.15495/EPub_UBT_00008488

Böck, Maximilian ; Chudej, Kurt:
Untersuchung eines SIRD Krankheitsmodells.
2025
Event: Simulation in Umwelt- und Geowissenschaften , 26.-28.3.2025 , Göttingen.
(Conference item: Workshop , Speech )

2024

Grenzfurtner, Wolfgang ; Tizghadam, Parisa ; Gruchmann, Tim:
Production line balancing and reconfiguration in food industry : A simulation study from a baked goods manufacturer.
2024
Event: 6th International Conference on Industry 4.0 and Smart Manufacturing , 20.-22. November 2024 , Prague.
(Conference item: Conference , Speech with paper )

Grohmann, Peter ; Hüter, Florian ; Budde, Till ; Tremmel, Stephan:
Ansätze zur Effizienzsteigerung in der Finite-Elemente-Methode : Analyse und Optimierung der FE-Software Z88.
2024
Event: 22. Gemeinsames Kolloquium Konstruktionstechnik 2024 , 01.-2.10.2024 , Wuppertal.
(Conference item: Conference , Speech with paper )

Chudej, Kurt ; Appel, Christian:
Theoretische und Numerische Untersuchungen eines Krankheitsmodells mit mehreren Tierarten.
2024
Event: Vortrag im Oberseminar Wissenschaftliches Rechnen, Julius-Maximilians-Universität Würzburg , 12.7.2024 , Würzburg.
(Conference item: Lecture series , Speech )

Grenzfurtner, Wolfgang ; Betto, Frida:
Performance management practices to continuously improve the productivity of industrialised housebuilding order fulfilment processes.
2024
Event: 31st EurOMA Conference : “Transforming people and processes for a better world” , 29. June - 03. July 2024 , Sant Cugat.
(Conference item: Conference , Paper )

Grenzfurtner, Wolfgang ; Gronalt, Manfred:
A value stream mapping approach to align the prefab housebuilding supply chain.
2024
Event: 31st EurOMA Conference : “Transforming people and processes for a better world” , 29. June - 03. July 2024 , Sant Cugat.
(Conference item: Conference , Paper )

Chudej, Kurt ; Appel, Christian:
Modellierung, Simulation und Analyse invasiver mückenübertragener Krankheiten.
2024
Event: Vortrag am Institut für angewandte Mathematik und wissenschaftliches Rechnen, Fakultät für Luft- und Raumfahrttechnik, Universität der Bundeswehr, München , 7.6.2024 , München.
(Conference item: Lecture series , Speech )

Knorr, Julian ; Li, Jiahao ; Schamel, Maximilian ; Kufner, Thomas ; Adam, Alexander ; Danzer, Michael A.:
Active Material Lithiation in Gr/SiOx Blend Anodes at Increased C-Rates.
In: Journal of the Electrochemical Society. Vol. 171 (2024) Issue 8 . - 080512.
DOI: https://doi.org/10.1149/1945-7111/ad68a9

Maradesa, Adeleke ; Py, Baptiste ; Huang, Jake ; Lu, Yang ; Iurilli, Pietro ; Mrozinski, Aleksander ; Law, Ho Mei ; Wang, Yuhao ; Wang, Zilong ; Li, Jingwei ; Xu, Shengjun ; Meyer, Quentin ; Liu, Jiapeng ; Brivio, Claudio ; Gavrilyuk, Alexander ; Kobayashi, Kiyoshi ; Bertei, Antonio ; Williams, Nicholas J. ; Zhao, Chuan ; Danzer, Michael A. ; Zic, Mark ; Wu, Phillip ; Yrjänä, Ville ; Pereverzyev, Sergei ; Chen, Yuhui ; Weber, André ; Kalinin, Sergei V. ; Schmidt, Jan Philipp ; Tsur, Yoed ; Boukamp, Bernard A. ; Zhang, Qiang ; Gaberšček, Miran ; O’Hayre, Ryan ; Ciucci, Francesco:
Advancing electrochemical impedance analysis through innovations in the distribution of relaxation times method.
In: Joule. Vol. 8 (2024) Issue 7 . - pp. 1958-1981.
DOI: https://doi.org/10.1016/j.joule.2024.05.008

Kayßer, Simon Tino:
Carbamat-geschäumte Epoxidharze – Optimierung von Brandverhalten und Mechanik durch Füllstoffe.
Bayreuth , 2024 . - XIV, 192 p.
( Doctoral thesis, 2024 , Universität Bayreuth, Fakultät für Ingenieurwissenschaften)
DOI: https://doi.org/10.15495/EPub_UBT_00007835

Vogler, Jonas ; Schneiderman, Benjamin ; Yu, Zhenzhen ; Huber, Jakob ; Völkl, Rainer ; Glatzel, Uwe:
Compositionally Complex Alloy MnFeCoNiCu for Brazing Nickel-Based Superalloy Haynes 214.
In: Advanced Engineering Materials. Vol. 26 (2024) Issue 14 . - 2400747.
DOI: https://doi.org/10.1002/adem.202400747

Polin, Katherine ; Shuftan, Nathan ; Webb, Erin ; Opoku, Daniel ; Droti, Benson ; Quentin, Wilm:
Data for health system comparison and assessment in the African Region: A review of 63 indicators available in international databases.
In: Journal of Global Health. Vol. 14 (2024) . - 04118.
DOI: https://doi.org/10.7189/jogh.14.04118

Ulrich, Anke Silvia ; Kasatikov, Sergey ; König, Till ; Fantin, Andrea ; Margraf, Johannes T. ; Galetz, Mathias:
Decreased Metal Dusting Resistance of Ni-Cu Alloys by Fe and Mn Additions.
In: High Temperature Corrosion of Materials. Vol. 101 (2024) . - pp. 1301-1314.
DOI: https://doi.org/10.1007/s11085-024-10263-w

Rüther, Tom ; Hileman, Wesley ; Plett, Gregory L. ; Trimboli, M. Scott ; Danzer, Michael A.:
Demystifying the Distribution of Relaxation Times : A Simulation-Based Investigation into the Limits and Possibilities of Interpretation for Lithium-Ion Batteries.
In: Journal of the Electrochemical Society. Vol. 171 (2024) Issue 6 . - 060508.
DOI: https://doi.org/10.1149/1945-7111/ad4fe5

Knorr, Julian ; Gomez-Martin, Aurora ; Hsiao, Hao-Chen ; Adam, Alexander ; Rödl, Barbara ; Danzer, Michael A.:
Effect of different charge rates on the active material lithiation of Gr/SiOx blend anodes in lithium-ion cells.
In: Journal of Energy Storage. Vol. 86, Part A (2024) . - 111151.
DOI: https://doi.org/10.1016/j.est.2024.111151

Hoffmann, Sascha W. ; Schierbauer, Janis ; Zimmermann, Paul ; Voit, Thomas ; Grothoff, Auguste Maria ; Wachsmuth, Nadine ; Rössler, Andreas ; Niedrist, Tobias ; Lackner, Helmut K. ; Moser, Othmar:
Effects of Interrupting Prolonged Sitting with Light-Intensity Physical Activity on Inflammatory and Cardiometabolic Risk Markers in Young Adults with Overweight and Obesity : Secondary Outcome Analyses of the SED-ACT Randomized Controlled Crossover Trial.
In: Biomolecules. Vol. 14 (2024) Issue 8 . - 1029.
DOI: https://doi.org/10.3390/biom14081029

Hoffmann, Sascha W. ; Schierbauer, Janis ; Zimmermann, Paul ; Voit, Thomas ; Grothoff, Auguste Maria ; Wachsmuth, Nadine ; Rössler, Andreas ; Lackner, Helmut K. ; Moser, Othmar:
Effects of light‐intensity physical activity on cardiometabolic parameters in young adults with overweight and obesity : The SED‐ACT randomized controlled crossover trial.
In: Diabetes, Obesity and Metabolism. Vol. 26 (2024) Issue 9 . - pp. 3849-3859.
DOI: https://doi.org/10.1111/dom.15732

Hofmann, Andreas ; Grotz, Tim ; Köstler, Nico ; Mahr, Alexander ; Döpper, Frank:
Electrical Smoothing of the Powder Bed Surface in Laser-Based Powder Bed Fusion of Metals.
In: Journal of Manufacturing and Materials Processing. Vol. 8 (2024) Issue 3 . - 112.
DOI: https://doi.org/10.3390/jmmp8030112

Danzer, Michael A. ; Plank, Christian ; Rüther, Tom:
Electrochemical system analysis from impedance data to system identification.
In: Cell Reports Physical Science. Vol. 5 (2024) Issue 7 . - 102091.
DOI: https://doi.org/10.1016/j.xcrp.2024.102091

Weingart, Nick:
Entwicklung eines kontinuierlichen Schäumprozesses für neuartige expandierte und expandierbare Polycarbonat-Partikel-schäume in struktureller Anwendung.
Bayreuth , 2024 . - V,144 p.
( Doctoral thesis, 2023 , Universität Bayreuth, Fakultät für Ingenieurwissenschaften)
DOI: https://doi.org/10.15495/EPub_UBT_00007440

Foken, Thomas ; Goldberg, Valeri ; Einfalt, Thomas ; Waas, Stefan:
Ergebnis der Überarbeitung der VDI 3786-21 zur Bestimmung der Verdunstung.
In: Gefahrstoffe, Reinhaltung der Luft. Vol. 84 (2024) Issue 7-8 . - pp. 195-198.
DOI: https://doi.org/10.37544/0949-8036-2024-07-08-33

Gruchmann, Tim ; Grenzfurtner, Wolfgang ; Salzmann, Axel:
From inside the cabin : truck drivers' technology acceptance of driving assistance systems.
In: Logistics Research. Vol. 17 (2024) Issue 1 .
DOI: https://doi.org/10.23773/2024_1

Vogler, Jonas ; Völkl, Rainer ; Song, Jieun ; Viebranz, Vincent Fabian ; Huber, Jakob ; Bauer, Hans-Jörg ; Werner, Ewald ; Glatzel, Uwe:
High temperature and high strain rate properties of brazed honeycomb liner material Haynes 214.
In: Wear. Vol. 550-551 (2024) . - 205427.
DOI: https://doi.org/10.1016/j.wear.2024.205427

Chudej, Kurt ; Rohlfs, Jann:
Hopfbifurkation und Grenzzyklus bei einem Modell einer mückenübertragenen Krankheit mit temporärer Kreuzimmunität.
In: Rose, Oliver ; Uhlig, Tobias (ed.): ASIM SST 2024 : Tagungsband Langbeiträge. - Wien : ARGESIM Verlag, 2024 . - pp. 9-17 . - (ARGESIM Report ; 47 )
DOI: https://doi.org/10.11128/arep.47.a4706

Öztürk, Beyza ; White, Emma ; Dickes, Daniel ; Glatzel, Uwe ; Mengis, Lukas ; Galetz, Mathias:
Improved tribological behavior of Ti-6Al-4V through a novel zirconium diffusion coating.
In: Surface and Coatings Technology. Vol. 487 (2024) . - 130993.
DOI: https://doi.org/10.1016/j.surfcoat.2024.130993

Dickes, Daniel ; Zhao, Yujun ; Baier, Felix ; Öztürk, Beyza ; Völkl, Rainer ; Li, Tong ; Galetz, Mathias C. ; Glatzel, Uwe:
Influence of oxygen ingress on microstructure and phase formation during two-step oxidation surface hardening of TiZrNbHfTa high entropy alloy.
In: Applied Physics Letters. Vol. 124 (2024) Issue 7 . - 071903.
DOI: https://doi.org/10.1063/5.0190771

Scherm, Florian ; Daoud, Haneen ; Glatzel, Uwe:
Influence of Printing Strategies on the Microstructure and Mechanical Properties of Additively Manufactured Alloy 625 Using Directed Energy Deposition (DED-LB-p).
In: Metals. Vol. 14 (2024) Issue 9 . - 1041.
DOI: https://doi.org/10.3390/met14091041

Jasinski, Julia ; Völkl, Matthias ; Wilde, Magdalena V. ; Jérôme, Valérie ; Fröhlich, Thomas ; Freitag, Ruth ; Scheibel, Thomas:
Influence of the polymer type of a microplastic challenge on the reaction of murine cells.
In: Journal of Hazardous Materials. Vol. 465 (2024) . - 133280.
DOI: https://doi.org/10.1016/j.jhazmat.2023.133280

Öztürk, Beyza ; Rudolphi, Mario ; White, Emma ; Dickes, Daniel ; Glatzel, Uwe ; Galetz, Mathias:
Influence of Water Vapor on the Oxidation of Pure Titanium.
In: High Temperature Corrosion of Materials. Vol. 101 (2024) . - pp. 1341-1351.
DOI: https://doi.org/10.1007/s11085-024-10288-1

Gartner, Maria Anna ; Grenzfurtner, Wolfgang ; Zauner, Barbara ; Gronalt, Manfred:
Job and product rotation for maximising the production output on multi mixed-model assembly lines for element prefabrication in industrialised housebuilding.
In: Computers & Industrial Engineering. Vol. 190 (2024) . - 110041.
DOI: https://doi.org/10.1016/j.cie.2024.110041

Weber, Andrea ; van Hees, Vincent T. ; Stein, Michael J. ; Gastell, Sylvia ; Steindorf, Karen ; Herbolsheimer, Florian ; Ostrzinski, Stefan ; Pischon, Tobias ; Brandes, Mirko ; Krist, Lilian ; Marschollek, Michael ; Greiser, Karin Halina ; Nimptsch, Katharina ; Brandes, Berit ; Jochem, Carmen ; Sedlmeier, Anja M. ; Berger, Klaus ; Brenner, Hermann ; Buck, Christoph ; Castell, Stefanie ; Dörr, Marcus ; Emmel, Carina ; Fischer, Beate ; Flexeder, Claudia ; Harth, Volker ; Hebestreit, Antje ; Heise, Jana-Kristin ; Holleczek, Bernd ; Keil, Thomas ; Koch-Gallenkamp, Lena ; Lieb, Wolfgang ; Meinke-Franze, Claudia ; Michels, Karin B. ; Mikolajczyk, Rafael ; Kluttig, Alexander ; Obi, Nadia ; Peters, Annette ; Schmidt, Börge ; Schipf, Sabine ; Schulze, Matthias B. ; Teismann, Henning ; Waniek, Sabina ; Willich, Stefan N. ; Leitzmann, Michael F. ; Baurecht, Hansjörg:
Large-scale assessment of physical activity in a population using high-resolution hip-worn accelerometry: the German National Cohort (NAKO).
In: Scientific Reports. Vol. 14 (2024) . - 7927.
DOI: https://doi.org/10.1038/s41598-024-58461-5

Niotis, Aristeidis ; Chudej, Kurt:
Mathematical Analysis of a Compartment Model.
In: Rose, Oliver ; Uhlig, Tobias (ed.): ASIM SST 2024 : Tagungsband Langbeiträge. - Wien : ARGESIM Verlag, 2024 . - pp. 1-8 . - (ARGESIM Report ; 47 )
DOI: https://doi.org/10.11128/arep.47.a4707

Chudej, Kurt ; Appel, Christian:
Mathematische Modellierung und Numerische Simulation von vektorübertragenen Krankheiten.
2024
Event: GAMM Workshop Control and Optimization in the Age of Data , 18.-20.9.2024 , Bayreuth.
(Conference item: Workshop , Speech )

Jochem, Carmen ; Albrecht, Lorenz:
Mobilität.
In: Karl, Sebastian ; Meyer-Lindenberg, Andreas (ed.): Psychiatrie in Zeiten globaler Umweltkrisen. - Stuttgart : Kohlhammer, 2024 . - pp. 117-133
DOI: https://doi.org/10.17433/978-3-17-044347-1

Shittu, Ridwan Adeyemi ; Thomas, Stephanie ; Roiz, David ; Ruiz, Santiago ; Figuerola, Jordi ; Beierkuhnlein, Carl:
Modeling the effects of species associations and abiotic parameters on the abundance of mosquito species in a Mediterranean wetland.
In: Wetlands Ecology and Management. Vol. 32 (2024) . - pp. 381-395.
DOI: https://doi.org/10.1007/s11273-024-09982-3

Streifinger, Florian:
Modellierung, Analyse und Simulation von Krankheiten.
Bayreuth , 2024
(Master's, 2024 , Universität Bayreuth, Fakultät für Mathematik, Physik und Informatik, Lehrstuhl für Wissenschaftliches Rechnen)

Kuhn, Nora ; Roppelt, Dominik ; Dreier, Thomas ; Rosemann, Bernd:
More accurate Greenhouse Gas Calculation using the TopDown weight-based Approach.
DFGE – Institute for Energy, Ecology and Economy GmbH
Bayreuth , 2024 . - 19 S. - (Online-Schriftenreihe der DFGE )

Appel, Christian ; Chudej, Kurt:
MPC bei einem Krankheitsmodell mit mehreren Tierarten.
2024
Event: Workshop Simulation in den Umwelt- und Geowissenschaften , 10.-12.04.2024 , Leipzig.
(Conference item: Workshop , Speech )

Schreff, Lucas:
Neuromuskuläre Kontrolle des menschlichen Gehens: Eine computergestützte, modellbasierte Untersuchung verschiedener Kontrollstrategien und deren Auswirkungen auf die Stabilität.
Bayreuth , 2024 . - 73, XVIII p.
( Doctoral thesis, 2024 , Universität Bayreuth, Kulturwissenschaftliche Fakultät)
DOI: https://doi.org/10.15495/EPub_UBT_00007859

Hackmann, Tobias ; Esser, Sebastian ; Danzer, Michael A.:
Operando determination of lithium-ion cell temperature based on electrochemical impedance features.
In: Journal of Power Sources. Vol. 615 (2024) . - 235036.
DOI: https://doi.org/10.1016/j.jpowsour.2024.235036

Huber, Jakob ; Vogler, Jonas ; Torgersen, Jan ; Werner, Ewald:
Predicting mechanical failure of polycrystalline dual-phase nickel-based alloys by numerical homogenization using a phase field damage model.
In: Continuum Mechanics and Thermodynamics. Vol. 36 (2024) . - pp. 775-793.
DOI: https://doi.org/10.1007/s00161-024-01298-0

Vysoudil, Filip ; Hansen, Sönke ; Mennenga, Mark ; Fukuda, Maho ; Ohnemüller, Gregor ; Rüther, Tom ; Goers, Dietrich ; Koller, Jan ; Nikolowski, Kristian ; Rosemann, Bernd ; Wolter, Mareike ; Danzer, Michael A. ; Döpper, Frank ; Herrmann, Christoph ; Vietor, Thomas:
Procedure Model to Support the Recycling-Oriented Design of Lithium-Ion Batteries for Electric Vehicles.
In: Fukushige, Shinichi ; Kobayashi, Hideki ; Yamasue, Eiji ; Hara, Keishiro (ed.): EcoDesign for Sustainable Products, Services and Social Systems I. - Cham ; Singapore : Springer, 2024 . - pp. 383-397
DOI: https://doi.org/10.1007/978-981-99-3818-6_26

Haderer, Marika ; Hofmann, Reiner ; Bader, Alisa ; von Schau, Natascha:
Proof of Principle : Das Hausarztzentrierte Adipositas-Präventionsprogramm: Exercise & Nutrition (HAPpEN) in ländlichen Regionen Deutschlands.
In: Adipositas : Ursachen, Folgeerkrankungen, Therapie. Vol. 18 (2024) Issue 3 . - pp. 158-159.
DOI: https://doi.org/10.1055/s-0044-1788875

Paarmann, Sabine ; Schreiber, Markus ; Chahbaz, Ahmed ; Hildenbrand, Felix ; Stahl, Gereon ; Rogge, Marcel ; Dechent, Philipp ; Queisser, Oliver ; Frankl, Sebastian Dominic ; Morales Torricos, Pablo ; Lu, Yao ; Nikolov, Nikolay I. ; Kateri, Maria ; Sauer, Dirk Uwe ; Danzer, Michael A. ; Wetzel, Thomas ; Endisch, Christian ; Lienkamp, Markus ; Jossen, Andreas ; Lewerenz, Meinert:
Short‐Term Tests, Long‐Term Predictions : Accelerating Ageing Characterisation of Lithium‐Ion Batteries.
In: Batteries & Supercaps. Vol. 7 (2024) Issue 11 . - e202300594.
DOI: https://doi.org/10.1002/batt.202300594

Mondellini, Simona ; Schwarzer, Michael ; Völkl, Matthias ; Jasinski, Julia ; Jérôme, Valérie ; Scheibel, Thomas ; Laforsch, Christian ; Freitag, Ruth:
Size dependent uptake and trophic transfer of polystyrene microplastics in unicellular freshwater eukaryotes.
In: Science of the Total Environment. Vol. 929 (2024) . - 172470.
DOI: https://doi.org/10.1016/j.scitotenv.2024.172470

Hansen, Sönke ; Rüther, Tom ; Mennenga, Mark ; Helbig, Christoph ; Ohnemüller, Gregor ; Vysoudil, Filip ; Wolf, Constantin ; Rosemann, Bernd ; Pavón, Sandra ; Michaelis, Alexander ; Vietor, Thomas ; Döpper, Frank ; Herrmann, Christoph ; Danzer, Michael A.:
A structured approach for the compliance analysis of battery systems with regard to the new EU Battery Regulation.
In: Resources, Conservation & Recycling. Vol. 209 (2024) . - 107752.
DOI: https://doi.org/10.1016/j.resconrec.2024.107752

Baumgart, Christin:
Struktur-Prozess-Eigenschaftsbeziehungen von spritzgegossenen Thermoplast-Flüssigsilikon-Verbunden.
Bayreuth , 2024 . - IX, 130 p.
( Doctoral thesis, 2023 , Universität Bayreuth, Fakultät für Ingenieurwissenschaften)
DOI: https://doi.org/10.15495/EPub_UBT_00007475

Kroiß, Katharina ; Jochem, Carmen ; Weber, Andrea:
Die studentische Gesundheit : Herausforderungen und Potenziale.
In: Public Health Forum. Vol. 32 (2024) Issue 2 . - pp. 120-123.
DOI: https://doi.org/10.1515/pubhef-2024-0022

Schönl, Florian ; Demleitner, Martin ; Angermann, Jörg ; Fässler, Pascal ; Lamparth, Iris ; Rist, Kai ; Schnur, Thomas ; Catel, Yohann ; Rosenfeldt, Sabine ; Ruckdäschel, Holger:
Synthesis and evaluation of novel urethane macromonomers for the formulation of fracture tough 3D printable dental materials.
In: Journal of the Mechanical Behavior of Biomedical Materials. Vol. 160 (2024) . - 106737.
DOI: https://doi.org/10.1016/j.jmbbm.2024.106737

Appel, Christian ; Chudej, Kurt:
Theoretische Analyse eines Kompartimentmodells einer mückenübertragenen Krankheit mit mehreren Vogelarten.
In: Rose, Oliver ; Uhlig, Tobias (ed.): ASIM SST 2024 : Tagungsband Langbeiträge. - Wien : ARGESIM Verlag, 2024 . - pp. 35-42 . - (ARGESIM Report ; 47 )
DOI: https://doi.org/10.11128/arep.47.a4728

Chudej, Kurt ; Rohlfs, Jann:
Theoretische Untersuchung eines Kompartimentmodells einer mückenübertragenen Krankheit mit zwei Serotypen und temporärer Kreuzimmunität.
In: Wittmann, Jochen ; Müller, Mike (ed.): Simulation in Umwelt- und Geowissenschaften : Workshop Leipzig 2024. - Düren : Shaker, 2024 . - pp. 163-172 . - (ASIM Mitteilung ; 188 )

Appel, Christian:
Untersuchung eines Krankheitsmodells mit mehreren Tierarten.
Bayreuth , 2024
(Master's, 2024 , Universität Bayreuth, Fakultät für Mathematik, Physik und Informatik, Lehrstuhl für Wissenschaftliches Rechnen)

Chudej, Kurt ; Bludau, Johann:
Wann gibt es keine Backward Bifurcation bei Impfungen?
In: Wittmann, Jochen ; Müller, Mike (ed.): Simulation in Umwelt- und Geowissenschaften : Workshop Leipzig 2024. - Düren : Shaker, 2024 . - pp. 173-184 . - (ASIM Mitteilung ; 188 )

2023

Grenzfurtner, Wolfgang ; Gronalt, Manfred:
Leistungsmanagement im Fertighausbau : Stand der Technik des Managements der Baustellenleistung - Erkenntnisse aus einer Mehrfallstudie.
In: Hofstadler, Christian ; Motzko, Christoph (ed.): Agile Digitalisierung im Baubetrieb : Innovative Wege zur Transformation und Best Practices. 2. Auflage. - Wiesbaden : Springer Vieweg, 2023 . - pp. 605-621
DOI: https://doi.org/10.1007/978-3-658-43247-8_31

Rank, Philipp ; Spreng, Sarah ; Müllner, Sebastian ; Gerdes, Thorsten:
Influence of Particle Size and Morphology on Electrochemical Properties of Glass Particle-Based Separators for Lithium-Ion Batteries.
2023
Event: 244th ECS Meeting , 08. - 12. Oktober 2023 , Göteborg, Schweden.
(Conference item: Conference , Speech )

Rosemann, Scarlett ; Rosemann, Bernd:
The influence of climate change on the distribution of the Oak Processionary Moth in Bavaria.
Research Square , 2023 . - 15 Seiten
DOI: https://doi.org/10.21203/rs.3.rs-3412567/v1

Ohnemüller, Gregor ; Rosemann, Bernd:
Design for Remanufacturing von Hochvolt-Traktionsbatterien.
In: Tremmel, Stephan ; Alber-Laukant, Bettina ; Rosnitschek, Tobias ; Lehrstuhl für Konstruktionslehre und CAD, Universität Bayreuth (ed.): Tagungsband 24. Bayreuther 3D-Konstrukteurstag. - Bayreuth , 2023 . - (Bayreuther 3D-Konstrukteurstag )

Grenzfurtner, Wolfgang ; Pichler, Elena ; Gronalt, Manfred:
Increasing the output of prefab production lines : simulation aid to guide the improvement process.
In: Affenzeller, Michael ; Bruzzone, Agostino G. ; Jimenez, Emilio ; Longo, Francesco ; Petrillo, Antonella (ed.): Proceedings of the 35th European Modeling & Simulation Symposium (EMSS 2023). - Athens, Greece , 2023 . - pp. 199-212
DOI: https://doi.org/10.46354/i3m.2023.emss.037

Faghih-Naini, Sara ; Aizinger, Vadym ; Kuckuk, Sebastian ; Angersbach, Richard ; Alt, Christoph ; Kenter, Tobias ; Köstler, Harald:
Algorithm re-design and code generation for performance improvements of a discontinuous Galerkin shallow water model on CPUs, GPUs, FPGAs and heterogeneous systems.
2023
Event: European Conference on Numerical Mathematics and Advanced Applications (ENUMATH) 2023 , 4.-8. September 2023 , Lisbon, Portugal.
(Conference item: Conference , Speech )

Ohnemüller, Gregor ; Beller, Marie ; Rosemann, Bernd ; Döpper, Frank:
Disassembly and its Obstacles : Challenges facing Remanufacturers of Lithium-Ion Traction Batteries.
2023
Event: 6th International Conference on Remanufacturing , 27.-29. Juni 2023 , Amsterdam.
(Conference item: Conference , Paper )

Grenzfurtner, Wolfgang ; Baldermann, Susanne ; Litzel, Felicitas-Michele ; Lanvermann, Maria ; Schlüßler, Celine ; Fikar, Christian:
Analysing food loss in a regional vegetable supply chain from an operation management perspective.
2023
Event: 30th EurOMA Conference : “A Systems Lens on Operations” , 01.-06. July 2023 , Leuven.
(Conference item: Conference , Paper )

Rank, Philipp ; Müllner, Sebastian ; Gerdes, Thorsten:
Thin Glass-Separators for Lithium-Ion Batteries.
2023
Event: 13th International Advanced Automotive Battery Conference , 19.-22.06.2023 , Mainz, Germany.
(Conference item: Conference , Poster )

Faghih-Naini, Sara ; Aizinger, Vadym ; Kuckuk, Sebastian ; Angersbach, Richard ; Zint, Daniel ; Kemmler, Samuel ; Köstler, Harald ; Grosso, Roberto:
HPC code generation framework for the discontinuous Galerkin method as a technology demonstrator for digital twins.
2023
Event: Platform for Advanced Scientific Computing (PASC) Conference 2023 , 26.-28. June 2023 , Davos, Switzerland.
(Conference item: Conference , Speech )

Faghih-Naini, Sara ; Aizinger, Vadym ; Kuckuk, Sebastian ; Angersbach, Richard:
A parameter-free adaptivity indicator for a p-adaptive discontinuous Galerkin discretization of the shallow water equations.
2023
Event: SIAM Conference on Mathematical & Computational Issues in the Geosciences (GS23) , 19.-22. June 2023 , Bergen, Norway.
(Conference item: Conference , Speech )

Standau, Tobias:
Polybutylenterephthalat-Partikelschäume mit erhöhter thermischer Beständigkeit [:] – Einfluss eines epoxidbasierten Kettenverlängerers auf Verarbeitung und Eigenschaften.
Bayreuth , 2023 . - 152 p.
( Doctoral thesis, 2023, Universität Bayreuth)

Schwarz, Christina:
The principle of solving a mixed boundary value problem with the help of hierarchical matrices.
In: Krull, Claudia ; Commerell, Walter ; Durak, Umut ; Körner, Andreas ; Pawletta, Thorsten (ed.): ASIM WORKSHOP 2023, STS/GMMS/EDU : Kurzbeiträge & Abstract-Beiträge. - Wien : Argesim Verlag, 2023 . - p. 31 . - (ASIM Mitteilung ; 186 )
DOI: https://doi.org/10.11128/arep.22

Niotis, Aristeidis ; Chudej, Kurt:
Berechnung der Basisreproduktionszahl eines Corona Modells.
2023
Event: Workshop Simulation in den Umwelt- und Geowissenschaften , 02.-03.03.2023 , Bayreuth.
(Conference item: Workshop , Speech )

Chudej, Kurt ; Folger, Gaby:
Dengue Fieber Modelle.
2023
Event: Workshop Simulation in den Umwelt- und Geowissenschaften , 02.-03.03.2023 , Bayreuth.
(Conference item: Workshop , Speech )

Bauer, Maximilian:
Räumliche Modellierung von vektorübertragenen Krankheiten.
2023
Event: Workshop Simulation in den Umwelt- und Geowissenschaften , 02.-03.03.2023 , Bayreuth.
(Conference item: Workshop , Speech )

Faghih-Naini, Sara ; Aizinger, Vadym ; Kuckuk, Sebastian ; Angersbach, Richard ; Kemmler, Samuel ; Köstler, Harald:
A discontinuous Galerkin method for the shallow water equations on CPU-GPU systems.
2023
Event: Oral presentation at ASIM Simulation in den Umwelt- und Geowissenschaften , 2.-3. Fabruary 2023 , Bayreuth, Germany.
(Conference item: Other Event type, Speech )

Foken, Thomas:
Künstlich aufgehellte Bodenflächen zur Albedoerhöhung.
In: Lozán, J. L. ; Graßl, H. ; Breckle, S.-W. ; Kasang, D. ; Quante, M. (ed.): Warnsignal Klima : Können technische Lösungen zum Klimaschutz beitragen? - Hamburg : Wissenschaftliche Auswertungen, 2023 . - pp. 231-236
DOI: https://doi.org/10.25592/warnsignal.klima.climate.engineering.35

Gadelmeier, Christian:
Mechanische Eigenschaften von einkristallinen kubisch-flächenzentrierten Hochentropielegierungen über einen sehr weiten Temperaturbereich.
Düren : Shaker , 2023 . - 132 p.

DOI: https://doi.org/10.2370/9783844090017

Bay, Christian ; Groneberg, Hajo ; Hofmann, Andreas ; Mahr, Alexander:
Vier Schritte, um das Potential metallbasierter additiver Fertigung zu kennen.
In: additive : Die Plattform für additive Fertigung.
9 February 2023

Faghih-Naini, Sara ; Aizinger, Vadym ; Kuckuk, Sebastian ; Angersbach, Richard ; Zint, Daniel ; Kemmler, Samuel ; Köstler, Harald ; Grosso, Roberto:
Computational performance optimizations for a discontinuous Galerkin discretization of the shallow water equations.
2023
Event: Invited presentation at Lappeenranta-Lahti University of Technology LUT , 22.-27. January 2023 , Lappeenranta, Finland.
(Conference item: Other Event type, Speech )

Müller, Moritz ; Böttger, Bernd ; Schleifer, Felix ; Fleck, Michael ; Glatzel, Uwe:
3D Minimum Channel Width Distribution in a Ni Base Superalloy.
In: Integrating Materials and Manufacturing Innovation. Vol. 12 (2023) . - pp. 27-40.
DOI: https://doi.org/10.1007/s40192-022-00290-3

Yesilcicek, Y. ; Haas, Sebastian ; Suárez Ocaño, P. ; Zaiser, E. ; Hesse, R. ; Többens, D. M. ; Glatzel, Uwe ; Manzoni, Anna M.:
Controlling Lattice Misfit and Creep Rate Through the γ' Cube Shapes in the Al₁₀Co₂₅Cr₈Fe₁₅Ni₃₆Ti₆ Compositionally Complex Alloy with Hf and W Additions.
In: High Entropy Alloys & Materials. Vol. 1 (2023) . - pp. 134-142.
DOI: https://doi.org/10.1007/s44210-022-00009-1

Helm, Moritz ; Huang, Songyan Ben ; Gollner, Katrin ; Gollner, Ulrich ; Jérôme, Valérie ; Freitag, Ruth:
Cultivation of Encapsulated Primary Human B Lymphocytes : A First Step toward a Bioartificial Germinal Center.
In: Macromolecular Bioscience. Vol. 23 (2023) Issue 1 . - 2200256.
DOI: https://doi.org/10.1002/mabi.202200256

Bay, Christian ; Baum, Matthias:
Innovative Geschäftsmodelle durch additive Fertigung und ihre Potenziale für den Vertrieb.
In: Binckebanck, Lars ; Elste, Rainer ; Haas, Alexander (ed.): Digitalisierung im Vertrieb : Strategien zum Einsatz neuer Technologien in Vertriebsorganisationen. 2., vollst. überarb. und erw. Auflage. - Wiesbaden : Springer Gabler, 2023 . - pp. 583-603
DOI: https://doi.org/10.1007/978-3-658-38433-3_23

Ernst, Wolf-Dieter:
Akteur-Netzwerk Theorie.
In: Hochholdinger-Reiterer, Beate ; Thurner, Christina ; Wehren, Juia (ed.): Theater und Tanz : Handbuch für Wissenschaft und Studium. - Baden-Baden : Nomos, 2023 . - pp. 237-242 . - (NomosHandbuch )
DOI: https://doi.org/10.5771/9783748928553

Post, Benjamin ; Badea, Cosmin ; Faisal, A. Aldo ; Brett, Stephen J.:
Breaking bad news in the era of artificial intelligence and algorithmic medicine : an exploration of disclosure and its ethical justification using the hedonic calculus.
In: AI and Ethics. Vol. 3 (2023) . - pp. 1215-1228.
DOI: https://doi.org/10.1007/s43681-022-00230-z

Rüther, Tom ; Schamel, Maximilian ; Plank, Christian ; Schomburg, Felix ; Röder, Fridolin ; Danzer, Michael A.:
Cell-to-cell variation beyond parameter analysis : Identification and correlation of processes in Lithium-Ion Batteries using a combined distribution of relaxation times analysis.
In: Journal of Power Sources. Vol. 587 (2023) . - 233677.
DOI: https://doi.org/10.1016/j.jpowsour.2023.233677

Rüther, Tom ; Schamel, Maximilian ; Plank, Christian ; Schomburg, Felix ; Röder, Fridolin ; Danzer, Michael A.:
Cell-to-Cell-Variations of a Panasonic NCR18650B.

Zenodo , 2023
DOI: https://doi.org/10.5281/zenodo.8369275

Beck, Katharina ; Hinrichs, Frauke ; Oskay, Ceyhun ; Ulrich, Anke Silvia ; Heilmaier, Martin ; Galetz, Mathias C.:
Chromium Diffusion Coatings for Mo-Based Silicides to Improve Their Oxidation Resistance.
In: Coatings. Vol. 13 (2023) Issue 10 . - 1712.
DOI: https://doi.org/10.3390/coatings13101712

Ulrich, Anke Silvia ; Schlereth, Clara ; Grégoire, Benjamin ; Sutter, Florian ; Oskay, Ceyhun ; Hildebrandt, Christina ; Galetz, Mathias Christian:
Cr–Mn-diffusion coatings on VM12: In situ spinel formation with high solar absorptance for concentrated solar plants.
In: Solar Energy Materials and Solar Cells. Vol. 257 (2023) . - 112382.
DOI: https://doi.org/10.1016/j.solmat.2023.112382

Hüftlein, Frederic ; Seidenath, Dimitri ; Mittereder, Andreas ; Hillenbrand, Thomas ; Brüggemann, Dieter ; Otti, Oliver ; Feldhaar, Heike ; Laforsch, Christian ; Schott, Matthias:
Effects of diesel exhaust particles on the health and survival of the buff-tailed bumblebee Bombus terrestris after acute and chronic oral exposure.
In: Journal of Hazardous Materials. Vol. 458 (2023) . - 131905.
DOI: https://doi.org/10.1016/j.jhazmat.2023.131905

Rosemann, Bernd:
Electric Vehicles Remanufacturing and Sustainability / Climate Crisis Challenge.
Automotive Parts Remanufacturers Association
In: APRA Europe News. (2023) Issue 29 . - pp. 12-15.

Bay, Christian ; Nagengast, Niko ; Schmidt, Hans-Werner ; Döpper, Frank ; Neuber, Christian:
Environmental Assessment of Recycled Petroleum and Bio Based Additively Manufactured Parts via LCA.
In: Kohl, Holger ; Seliger, Günther ; Dietrich, Franz (ed.): Manufacturing Driving Circular Economy : Proceedings. - Cham : Springer, 2023 . - pp. 669-677 . - (Lecture Notes in Mechanical Engineering )
DOI: https://doi.org/10.1007/978-3-031-28839-5_75

Flaucher, Madeleine ; Zakreuskaya, Anastasiya ; Nissen, Michael ; Mocker, Alexander ; Fasching, Peter A. ; Beckmann, Matthias W. ; Eskofier, Björn M. ; Leutheuser, Heike:
Evaluating the Effectiveness of Mobile Health in Breast Cancer Care : A Systematic Review.
In: The Oncologist. Vol. 28 (2023) Issue 10 . - e847-e858.
DOI: https://doi.org/10.1093/oncolo/oyad217

Mörschel, Katharina S. ; von Philipsborn, Peter ; Hawkins, Benjamin ; McGill, Elizabeth:
Evidence-related framing in the German debate on sugar taxation : a qualitative framing analysis and international comparison.
In: Evidence & Policy. Vol. 19 (2023) Issue 1 . - pp. 42-57.
DOI: https://doi.org/10.1332/174426421X16448353303856

Jünger, Jana ; Klumpp, Victoria ; Heid, Jörn ; Mutschler, Anna ; Brass, Konstantin ; Ströhl, Sarah ; Erlenbeck, Constantin ; König, Lars ; Lauerer, Michael ; Nagel, Eckhard ; Egarter, Saskia:
Evidenzbasierte Gesundheitsinformationen suchen, finden und bewerten : Erste Ergebnisse zur Entwicklung und Pilotierung eines objektiven Gesundheitskompetenz-Tests für die Sekundarstufe I.
In: Das Gesundheitswesen. Vol. 85 (2023) Issue 8/9 . - p. 777.
DOI: https://doi.org/10.1055/s-0043-1770485

Knorr, Julian ; Kufner, Thomas ; Adam, Alexander ; Danzer, Michael A.:
Experimental Analysis of the Current Distribution between Graphite and SiOx in Blend Electrodes for Lithium-Ion Cells.
In: ECS Meeting Abstracts. Vol. MA2023-02 (2023) Issue 2 . - p. 303.
DOI: https://doi.org/10.1149/MA2023-022303mtgabs

Wei, Xiaoxi ; Faisal, A. Aldo:
Federated deep transfer learning for EEG decoding using multiple BCI tasks.
In: 11th International IEEE/EMBS Conference on Neural Engineering (NER) : Proceedings. - IEEE, 2023 . - 4 S.
DOI: https://doi.org/10.1109/NER52421.2023.10123713

Gabler, Elisabeth ; Nissen, Michael ; Altstidl, Thomas R. ; Titzmann, Adriana ; Packhäuser, Kai ; Maier, Andreas ; Fasching, Peter A. ; Eskofier, Björn M. ; Leutheuser, Heike:
Fetal re-identification in multiple pregnancy ultrasound images using deep learning.
In: 45th Annual International Conference of the IEEE Engineering in Medicine & Biology Society (EMBC) : proceedings. - Piscataway, NJ : IEEE, 2023
DOI: https://doi.org/10.1109/EMBC40787.2023.10340336

Trossmann, Vanessa T.:
Funktionalisierung und Fabrikation von rekombinanten Spinnenseidengerüsten für die Gewebezüchtung.
Bayreuth , 2023 . - 311 p.
( Doctoral thesis, 2023 , Universität Bayreuth, Bayreuther Graduiertenschule für Mathematik und Naturwissenschaften - BayNAT)
DOI: https://doi.org/10.15495/EPub_UBT_00007371

Clemens, Stephan:
Genom-Editierung für mehr Lebensmittelsicherheit.
In: Bayerisches Landesamt für Gesundheit und Lebensmittelsicherheit (ed.): Neue genomische Techniken : Rechtliche Bewertungen, Anwendungen und Herausforderungen. - Erlangen , 2023 . - pp. 15-25 . - (Schriftenreihe Gentechnik für Umwelt und Verbraucherschutz ; 13 )

Fehse, Boris ; Walter, Jörn ; Bartfeld, Sina ; Clemens, Stephan ; Erb, Tobias ; Fangerau, Heiner ; Hampel, Jürgen ; Korte, Martin ; Müller-Terpitz, Ralf ; Mundlos, Stefan ; Reich, Jens ; Schicktanz, Silke ; Winkler, Eva C. ; Zenke, Martin:
Handlungsempfehlungen zur somatischen Gentherapie, Keimbahninterventionen und Zelltherapie.
In: Fehse, Boris ; Schickl, Hannah ; Bartfeld, Sina ; Zenke, Martin (ed.): Gen- und Zelltherapie 2.023 - Forschung, klinische Anwendung und Gesellschaft : AG Gentechnologiebericht mit freundlicher Unterstützung der DG-GT und des GSCN. - Berlin : Springer, 2023 . - pp. 1-10
DOI: https://doi.org/10.1007/978-3-662-67908-1_1

Rüther, Tom ; Gosea, Ion Victor ; Jahn, Leonard ; Antoulas, Athanasios C. ; Danzer, Michael A.:
Introducing the Loewner Method as a Data-Driven and Regularization-Free Approach for the Distribution of Relaxation Times Analysis of Lithium-Ion Batteries.
In: Batteries. Vol. 9 (2023) Issue 2 . - 132.
DOI: https://doi.org/10.3390/batteries9020132

Reihl, Jonas:
Krankheitsmodellierung mit retardierten Differentialgleichungen.
Bayreuth , 2023
( Bachelor thesis, 2023 , Universität Bayreuth, Fakultät für Mathematik, Physik und Informatik, Lehrstuhl für Wissenschaftliches Rechnen)

Niotis, Aristeidis:
Mathematische Analyse eines Krankheitsmodells.
Bayreuth , 2023
( Bachelor thesis, 2023 , Universität Bayreuth, Fakultät für Mathematik, Physik und Informatik, Lehrstuhl für Wissenschaftliches Rechnen)

Schmidt, Hannes:
Mathematische Kompartimentmodelle für Krankheiten.
Bayreuth , 2023
(Master's, 2023 , Universität Bayreuth, Fakultät für Mathematik, Physik und Informatik, Lehrstuhl für Wissenschaftliches Rechnen)

Vogler, Jonas ; Song, Jieun ; Huber, Jakob ; Völkl, Rainer ; Glatzel, Uwe:
Mechanical and Microstructural Properties of Brazed Honeycomb Liner Material Haynes 214.
In: Ott, Eric A. ; Andersson, Joel ; Sudbrack, Chantal ; Bi, Zhongnan ; Bockenstedt, Kevin ; Dempster, Ian ; Fahrmann, Michael ; Jablonski, Paul ; Kirka, Michael ; Liu, Xingbo ; Nagahama, Daisuke ; Smith, Tim ; Stockinger, Martin ; Wessman, Andrew (ed.): Proceedings of the 10th International Symposium on Superalloy 718 and Derivatives. - Cham : Springer, 2023 . - pp. 445-452 . - (The Minerals, Metals & Materials Series )
DOI: https://doi.org/10.1007/978-3-031-27447-3_28

Ulrich, Anke Silvia:
Metal Dusting : Aggressive Hochtemperaturkorrosion bei regenerativen Energien.
In: Galvanotechnik. Vol. 114 (2023) Issue 6 . - pp. 683-688.

Chen, Qianlin ; Yan, Wen ; Schafföner, Stefan ; Wu, Han ; Han, Bingqiang ; Zhang, Jinhua ; Li, Yawei:
Microstructures and strength of microporous MgO-Mg(Al, Fe)₂O₄ refractory aggregates.
In: Journal of the European Ceramic Society. Vol. 43 (2023) Issue 6 . - pp. 2654-2662.
DOI: https://doi.org/10.1016/j.jeurceramsoc.2023.01.023

Huber, Jakob ; Vogler, Jonas ; Werner, Ewald:
Multiscale modeling of the mechanical behavior of brazed Ni-based superalloy sheet metals.
In: Continuum Mechanics and Thermodynamics. Vol. 35 (2023) . - pp. 211-229.
DOI: https://doi.org/10.1007/s00161-022-01172-x

Folger, Gaby ; Chudej, Kurt:
Numerical Simulation of a Temperature Dependent Two Strain Dengue Fever Model.
In: Wittmann, Jochen ; Chudej, Kurt (ed.): Simulation in den Umwelt- und Geowissenschaften : Workshop Bayreuth 2023. - Düren : Shaker Verlag, 2023 . - pp. 89-99

Rohlfs, Jann:
Numerik und Theorie eines Dengue-Fieber Modells.
Bayreuth , 2023
( Bachelor thesis, 2023 , Universität Bayreuth, Fakultät für Mathematik, Physik und Informatik, Lehrstuhl für Wissenschaftliches Rechnen)

Grenzfurtner, Wolfgang ; Rudberg, Martin:
Performance Management Collaboration Between Companies Involved in the Industrialised Housebuilding Order Fulfilment Process.
In: Alfnes, Erlend ; Romsdal, Anita ; Strandhagen, Jan Ola ; von Cieminski, Gregor ; Romero, David (ed.): Advances in Production Management Systems : Production Management Systems for Responsible Manufacturing, Service, and Logistics Futures. - Cham : Springer, 2023 . - pp. 199-212 . - (IFIP Advances in Information and Communication Technology ; 691 )
DOI: https://doi.org/10.1007/978-3-031-43670-3_14

Petry, Nils-Christian ; Bik, Maciej ; Wilk, Łukasz ; Swadźba, Radosław ; Ulrich, Anke Silvia ; Sitarz, Maciej ; Lepple, Maren ; Galetz, Mathias Christian:
Polymer-derived SiAlOC coating to improve the high-temperature resistance of chromium.
In: Surface and Coatings Technology. Vol. 474 (2023) . - 130049.
DOI: https://doi.org/10.1016/j.surfcoat.2023.130049

Nissen, Michael ; Barrios Campo, Nuria ; Flaucher, Madeleine ; Jaeger, Katharina M. ; Titzmann, Adriana ; Blunck, Dominik ; Fasching, Peter A. ; Engelhardt, Victoria ; Eskofier, Björn M. ; Leutheuser, Heike:
Prevalence and course of pregnancy symptoms using self-reported pregnancy app symptom tracker data.
In: npj Digital Medicine. Vol. 6 (2023) Issue 1 . - 189.
DOI: https://doi.org/10.1038/s41746-023-00935-3

Menz, Fabian ; Bausch, Bruno ; Barillas, Joaquín Klee ; Böse, Olaf ; Danzer, Michael A. ; Hölzle, Markus:
Preventing thermal runaway propagation in lithium-ion batteries : Model-based optimization of interstitial heat-absorbing thermal barriers.
In: Journal of Power Sources. Vol. 584 (2023) . - 233578.
DOI: https://doi.org/10.1016/j.jpowsour.2023.233578

Nagendran, Myura ; Festor, Paul ; Komorowski, Matthieu ; Gordon, Anthony ; Faisal, A. Aldo:
Quantifying the impact of AI recommendations with explanations on prescription decision making : an interactive vignette study.
London , 2023 . - 23 p.
DOI: https://doi.org/10.21203/rs.3.rs-2971252/v1

Bauer, Maximilian:
Räumliche Modellierung von vektorübertragenen Krankheiten.
In: Wittmann, Jochen ; Chudej, Kurt (ed.): Simulation in den Umwelt- und Geowissenschaften : Workshop Bayreuth 2023. - Düren : Shaker Verlag, 2023 . - pp. 113-124

Zhang, Yuanhu ; Paul, Tasmai ; Brehm, Julian ; Völkl, Matthias ; Jérôme, Valérie ; Freitag, Ruth ; Laforsch, Christian ; Greiner, Andreas:
Role of Residual Monomers in the Manifestation of (Cyto)toxicity by Polystyrene Microplastic Model Particles.
In: Environmental Science & Technology. Vol. 57 (2023) Issue 27 . - pp. 9925-9933.
DOI: https://doi.org/10.1021/acs.est.3c01134

Chen, Dehua ; Daoud, Haneen ; Dörflinger, Thomas ; Näser, Peter ; Smuda, Ute ; Herlan, Jürgen ; Glatzel, Uwe:
Simulation assisted design and manufacturing of anode for the hard chrome plating of components with complex geometry.
In: Surface and Coatings Technology. Vol. 455 (2023) . - 129178.
DOI: https://doi.org/10.1016/j.surfcoat.2022.129178

Simulation in den Umwelt- und Geowissenschaften : Workshop Bayreuth 2023.
ed.: Wittmann, Jochen ; Chudej, Kurt
Düren : Shaker Verlag , 2023 . - 156 p.

Kirchner, Katja ; Lauerer, Michael ; Nagel, Eckhard:
Spotlight on relatives of tissue donors : what factors influence the decision-making process?
In: Transplantation. Vol. 107 (2023) Issue 10S1 . - p. 30.
DOI: https://doi.org/10.1097/01.tp.0000993156.20979.2f

Dickes, Daniel ; Öztürk, Beyza ; Baier, Felix ; Berger, Pascal ; George, Easo P. ; Völkl, Rainer ; Galetz, Mathias C. ; Glatzel, Uwe:
Surface hardening of TiZrNbHfTa high entropy alloy via oxidation.
In: Corrosion Science. Vol. 217 (2023) . - 111159.
DOI: https://doi.org/10.1016/j.corsci.2023.111159

Rosenkranz, Laura ; Feuerbacher, Michael ; Gadelmeier, Christian ; Schleifer, Felix ; Glatzel, Uwe:
Tensile behavior of hexagonal rare-earth-based low, medium, and high entropy alloys : Strengthening effect of configurational entropy.
In: Intermetallics. Vol. 155 (2023) . - 107835.
DOI: https://doi.org/10.1016/j.intermet.2023.107835

Chudej, Kurt ; Folger, Gaby:
Theoretische Analyse eines SEIR-Modells mit Impfung und nichtlinearem logistischen Wachstum.
In: Wittmann, Jochen ; Chudej, Kurt (ed.): Simulation in den Umwelt- und Geowissenschaften : Workshop Bayreuth 2023. - Düren : Shaker Verlag, 2023 . - pp. 101-112

Nagengast, Niko ; Bay, Christian ; Döpper, Frank ; Schmidt, Hans-Werner ; Neuber, Christian:
Thermo-Mechanical Recyclability of Additively Manufactured Polypropylene and Polylactic Acid Parts and Polypropylene Support Structures.
In: Polymers. Vol. 15 (2023) Issue 10 . - 2291.
DOI: https://doi.org/10.3390/polym15102291

Xu, Chengzhang ; Cheong, Jun Young ; Mo, Xiumei ; Jérôme, Valérie ; Freitag, Ruth ; Agarwal, Seema ; Gharibi, Reza ; Greiner, Andreas:
Thoroughly Hydrophilized Electrospun Poly(L-Lactide)/ Poly(ε-Caprolactone) Sponges for Tissue Engineering Application.
In: Macromolecular Bioscience. Vol. 23 (2023) Issue 11 . - 2300143.
DOI: https://doi.org/10.1002/mabi.202300143

Wannawas, Nat ; Faisal, A. Aldo:
Towards AI-Controlled FES-Restoration of Arm Movements : Controlling for Progressive Muscular Fatigue with Gaussian State-Space Models.
In: 11th International IEEE/EMBS Conference on Neural Engineering (NER) : Proceedings. - IEEE, 2023 . - 4 S.
DOI: https://doi.org/10.1109/ner52421.2023.10123874

Wannawas, Nat ; Faisal, A. Aldo:
Towards AI-controlled FES-restoration of arm movements : neuromechanics-based reinforcement learning for 3-D reaching.
In: 11th International IEEE/EMBS Conference on Neural Engineering (NER) : Proceedings. - IEEE, 2023 . - 4 S.
DOI: https://doi.org/10.1109/ner52421.2023.10123831

Saric, Merisa ; Scheibel, Thomas:
Two-in-One Spider Silk Protein with Combined Mechanical Features in All-Aqueous Spun Fibers.
In: Biomacromolecules. Vol. 24 (2023) Issue 4 . - pp. 1744-1750.
DOI: https://doi.org/10.1021/acs.biomac.2c01500

Stengel, Dillan ; Saric, Merisa ; Johnson, Hannah R. ; Schiller, Tim ; Diehl, Johannes ; Chalek, Kevin ; Onofrei, David ; Scheibel, Thomas ; Holland, Gregory P.:
Tyrosine's Unique Role in the Hierarchical Assembly of Recombinant Spider Silk Proteins : From Spinning Dope to Fibers.
In: Biomacromolecules. Vol. 24 (2023) Issue 3 . - pp. 1463-1474.
DOI: https://doi.org/10.1021/acs.biomac.2c01467

Nissen, Michael ; Perez, Carlos A. ; Jaeger, Katharina M. ; Bleher, Hannah ; Flaucher, Madeleine ; Huebner, Hanna ; Danzberger, Nina ; Titzmann, Adriana ; Pontones, Constanza A. ; Fasching, Peter A. ; Beckmann, Matthias W. ; Eskofier, Björn M. ; Leutheuser, Heike:
Usability and perception of a wearable-integrated digital maternity record app in Germany : user study.
In: JMIR Pediatrics and Parenting. Vol. 6 (2023) . - e50765.
DOI: https://doi.org/10.2196/50765

Kadirvelu, Balasundaram ; Gavriel, Constantinos ; Nageshwaran, Sathiji ; Chan, Jackson Ping Kei ; Nethisinghe, Suran ; Athanasopoulos, Stavros ; Ricotti, Valeria ; Voit, Thomas ; Giunti, Paola ; Festenstein, Richard ; Faisal, A. Aldo:
A wearable motion capture suit and machine learning predict disease progression in Friedreich’s ataxia.
In: Nature Medicine. Vol. 29 (2023) Issue 1 . - pp. 86-94.
DOI: https://doi.org/10.1038/s41591-022-02159-6

Nissen, Michael ; Flaucher, Madeleine ; Jaeger, Katharina M. ; Huebner, Hanna ; Danzberger, Nina ; Titzmann, Adriana ; Pontones, Constanza A. ; Fasching, Peter A. ; Eskofier, Björn M. ; Leutheuser, Heike:
WebPPG: Feasibility and usability of self-performed, browser-based smartphone photoplethysmography.
In: 45th Annual International Conference of the IEEE Engineering in Medicine & Biology Society (EMBC) : proceedings. - Piscataway, NJ : IEEE, 2023
DOI: https://doi.org/10.1109/EMBC40787.2023.10340204

2022

Nagels, Klaus:
Diagnostische und therapeutische Innovationserfolge bei SMA : Neue Herausforderungen für das Versorgungsmanagement.
2022
Event: Neurowoche 2022, Deutsche Gesellschaft für Neurologie , 04.11.2022 , Berlin.
(Conference item: Conference , Speech )

Bay, Christian:
Nachhaltigkeit durch interdisziplinäres Mindset.
2022
Event: 23. Bayreuther 3D-Konstrukteurstag , 14. September 2022 , Bayreuth.
(Conference item: Conference , Speech )
DOI: https://doi.org/10.15495/EPub_UBT_00006603

Bay, Christian:
The sustainability triple jump for AM : component, process and value chain.
2022
Event: 6th Additive Manufacturing Forum Berlin 2022 , 05.–06.07.2022 , Berlin.
(Conference item: Conference , Speech )

Faghih-Naini, Sara ; Aizinger, Vadym ; Kuckuk, Sebastian ; Angersbach, Richard ; Zint, Daniel ; Kemmler, Samuel ; Köstler, Harald ; Grosso, Roberto:
GHODDESS : p-adaptive discontinuous Galerkin discretization for ocean simulations.
2022
Event: LSS Summer Retreat 2022 , 18.-20. July 2022 , Waischenfeld, Germany.
(Conference item: Workshop , Speech )

Bay, Christian ; Mahr, Alexander:
Additive Fertigung - Nachhaltig und resilient mit additiven Innovationen.
In: Konstruktionspraxis. (June 2022) . - pp. 22-23.

Faghih-Naini, Sara ; Aizinger, Vadym ; Kuckuk, Sebastian ; Angersbach, Richard ; Köstler, Harald:
Hardware-optimized numerics for a discontinuous Galerkin shallow water model.
2022
Event: 8th European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS) , 05.-09. June 2022 , Oslo, Norway.
(Conference item: Conference , Speech )

Faghih-Naini, Sara ; Zint, Daniel ; Kuckuk, Sebastian ; Kemmler, Samuel ; Aizinger, Vadym ; Grosso, Roberto ; Köstler, Harald:
Shallow water simulations on complex ocean domains using block-structured grids.
2022
Event: Platform for Advanced Scientific Computing (PASC) Conference 2022 , 27.-29. June 2022 , Basel, Switzerland.
(Conference item: Conference , Poster )

Li, Bingtao ; Deodeshmukh, Vinay ; Schlereth, Clara ; Ulrich, Anke Silvia ; Galetz, Mathias C.:
Metal Dusting Resistance of N06235 Alloy and its Weld Overlay Under High Pressure Condition.
2022
Event: AMPP Annual Conference + Expo , March 2022 , San Antonio, Texas, USA.
(Conference item: Conference , Paper )

Wei, Xiaoxi ; Faisal, A. Aldo ; Grosse-Wentrup, Moritz ; Gramfort, Alexandre ; Chevalliere, Sylvain ; Jayaram, Vinay ; Jeunet, Camille ; Bakas, Stylianos ; Ludwig, Siegfried ; Barmpas, Konstantinos ; Bahri, Mehdi ; Panagakis, Yannis ; Laskaris, Nikolaos ; Adamos, Dimitrios A. ; Zafeiriou, Stefanos ; Duong, William C. ; Gordon, Stephen M. ; Lawhern, Vernon J. ; Sliwowski, Maciej ; Rouanne, Vincent ; Tempczyk, Piotr:
2021 BEETL competition : advancing transfer learning for subject independence and heterogenous EEG data sets.
In: Kiela, Douwe ; Ciccone, Marco ; Caputo, Barbara (ed.): NeurIPS 2021 Competition and Demonstration Track : Revised Selected Papers. - 2022 . - pp. 205-219 . - (Proceedings of Machine Learning Research ; 176 )

Bay, Christian ; Mahr, Alexander ; Hofmann, Andreas ; Wienert, Christian ; Döpper, Frank:
Analysis of the Influence of Build Plate Pre-Treatment and Process Parameters on the Bonding of Additively Manufactured Parts of TiAl₆V₄ to the Build Plate.
In: Muthusamy, Ramya ; Sengodan, Thangaprakash ; Khovaylo, Vladimir ; Liem, Nguyen Quang ; Ohashi, Takahiro (ed.): Advances in Materials and Technologies. - Baech, SZ : Trans Tech Publications Ltd, 2022 . - pp. 49-58 . - (Key Engineering Materials ; 934 )
DOI: https://doi.org/10.4028/p-yf8y2m

Bay, Christian:
Anforderungsdeterminiertes und aufwandsorientiertes Qualitätsmanagement für die additive Fertigung.
Aachen : Apprimus , 2022 . - III, 212 p. - (Produktion.Besser.Machen. ; 5 )
( Doctoral thesis, 2022 , Universität Bayreuth)

Körber, Selina ; Fleck, Michael ; Völkl, Rainer ; Glatzel, Uwe:
Anisotropic Growth of the Primary Dendrite Arms in a Single-Crystal Thin-Walled Nickel-Based Superalloy.
In: Advanced Engineering Materials. Vol. 24 (2022) Issue 6 . - 2101332.
DOI: https://doi.org/10.1002/adem.202101332

Meusel, Laura ; Rosemann, Bernd ; Morawiec, Michael:
Bewertung der technischen Sauberkeit im Herstellungsprozess von Lithium-Ionen-Batteriezellen automobiler Anwendung.
In: Industrie 4.0 Management. (2022) Issue 6 . - pp. 19-23.

Groneberg, Hajo ; Horstkotte, Rainer ; Pruemmer, Marcel ; Bergs, Thomas ; Döpper, Frank:
Concept for the reduction of non-value-adding operations in Laser Powder Bed Fusion (L-PBF).
In: Procedia CIRP. Vol. 107 (2022) . - pp. 344-349.
DOI: https://doi.org/10.1016/j.procir.2022.04.056

Schleifer, Felix ; Müller, Moritz ; Lin, Yueh-Yu ; Holzinger, Markus ; Glatzel, Uwe ; Fleck, Michael:
Consistent Quantification of Precipitate Shapes and Sizes in Two and Three Dimensions Using Central Moments.
In: Integrating Materials and Manufacturing Innovation. Vol. 11 (2022) Issue 2 . - pp. 159-171.
DOI: https://doi.org/10.1007/s40192-022-00259-2

Redka, David ; Winter, Jan ; Gadelmeier, Christian ; Djuranovic, Alexander ; Glatzel, Uwe ; Minár, Ján ; Huber, Heinz Paul:
Control of ultrafast laser ablation efficiency by stress confinement due to strong electron localization in high-entropy alloys.
In: Applied Surface Science. Vol. 594 (2022) . - 153427.
DOI: https://doi.org/10.1016/j.apsusc.2022.153427

Gadelmeier, Christian ; Yang, Ying ; Glatzel, Uwe ; George, Easo P.:
Creep strength of refractory high-entropy alloy TiZrHfNbTa and comparison with Ni-base superalloy CMSX-4.
In: Cell Reports Physical Science. Vol. 3 (2022) Issue 8 . - 100991.
DOI: https://doi.org/10.1016/j.xcrp.2022.100991

Chan, Nicholas J. ; Lentz, Sarah ; Gurr, Paul A. ; Tan, Shereen ; Scheibel, Thomas ; Qiao, Greg G.:
Crosslinked Polypeptide Films via RAFT-Mediated Continuous Assembly of Polymers.
In: Angewandte Chemie International Edition. Vol. 61 (2022) Issue 9 . - e202112842.
DOI: https://doi.org/10.1002/anie.202112842

Müller, Ann-Kathrin ; Brehm, Julian ; Völkl, Matthias ; Jérôme, Valérie ; Laforsch, Christian ; Freitag, Ruth ; Greiner, Andreas:
Disentangling biological effects of primary nanoplastics from dispersion paints' additional compounds.
In: Ecotoxicology and Environmental Safety. Vol. 242 (2022) . - 113877.
DOI: https://doi.org/10.1016/j.ecoenv.2022.113877

Shen, Bo-Wen ; Pielke Sr., Roger ; Zeng, Xubin ; Cui, Jialin ; Faghih-Naini, Sara ; Paxson, Wei ; Kesarkar, Amit ; Zeng, Xiping ; Atlas, Robert:
The Dual Nature of Chaos and Order in the Atmosphere.
In: Atmosphere. Vol. 13 (2022) Issue 11 . - 1892.
DOI: https://doi.org/10.3390/atmos13111892

Körber, Selina ; Wolff-Goodrich, Silas ; Völkl, Rainer ; Glatzel, Uwe:
Effect of Wall Thickness and Surface Conditions on Creep Behavior of a Single-Crystal Ni-Based Superalloy.
In: Metals. Vol. 12 (2022) Issue 7 . - 1081.
DOI: https://doi.org/10.3390/met12071081

Gockner, Cornelia ; Rosemann, Bernd ; Hansen, Barbara ; Kukla, Cornelia:
Effiziente Druckluftnutzung in der automatisierten Produktion.
In: Zeitschrift für wirtschaftlichen Fabrikbetrieb. Vol. 117 (2022) Issue 9 . - pp. 528-531.
DOI: https://doi.org/10.1515/zwf-2022-1121

Lo, Kai-Chi ; Murakami, Hideyuki ; Glatzel, Uwe ; Yeh, Jien-Wei ; Gorsse, Stéphane ; Yeh, An-Chou:
Elemental effects on the oxidation of refractory compositionally complex alloys.
In: International Journal of Refractory Metals and Hard Materials. Vol. 108 (2022) . - 105918.
DOI: https://doi.org/10.1016/j.ijrmhm.2022.105918

Völler, Heinz ; Bindl, Dominik ; Nagels, Klaus ; Hofmann, Reiner ; Vettorazzi, Eik ; Wegscheider, Karl ; Fleck, Eckart ; Störk, Stefan ; Nagel, Eckhard:
The First Year of Noninvasive Remote Telemonitoring in Chronic Heart Failure Is not Cost Saving but Improves Quality of Life : The Randomized Controlled CardioBBEAT Trial.
In: Telemedicine and E-health. Vol. 28 (2022) Issue 11 . - pp. 1613-1622.
DOI: https://doi.org/10.1089/tmj.2022.0021

Strassburg, Stephen ; Mayer, Kai ; Scheibel, Thomas:
Functionalization of biopolymer fibers with magnetic nanoparticles.
In: Physical Sciences Reviews. Vol. 7 (2022) Issue 10 . - pp. 1091-1117.
DOI: https://doi.org/10.1515/psr-2019-0118

Schwarz, Christina ; Leleux, Philippe ; Kühn, Martin J. ; Rüde, Ulrich:
Geometrisches Mehrgitterverfahren für die gyrokinetische Poisson-Gleichung mit Anwendung auf Kernfusion.
In: Breitenecker, Felix ; Deatcu, Christina ; Durak, Umut ; Körner, Andreas ; Pawletta, Thorsten (ed.): ASIM SST 2022 : Proceedings, Kurzbeiträge. - Wien : ARGESIM Verlag, 2022 . - pp. 73-76 . - (ASIM Mitteilung ; 179 )
DOI: https://doi.org/10.11128/arep.19

Liao, Xiaojian ; Jérôme, Valérie ; Agarwal, Seema ; Freitag, Ruth ; Greiner, Andreas:
High Strength and High Toughness Electrospun Multifibrillar Yarns with Highly Aligned Hierarchy Intended as Anisotropic Extracellular Matrix.
In: Macromolecular Bioscience. Vol. 22 (2022) Issue 12 . - 2200291.
DOI: https://doi.org/10.1002/mabi.202200291

Manzoni, Anna M. ; Glatzel, Uwe:
High-Entropy Alloys : Balancing Strength and Ductility at Room Temperature.
In: Miyamoto, Goro ; Gao, Michael C. (ed.): Encyclopedia of Materials : Metals and Alloys. Band 2. - Amsterdam : Elsevier, 2022 . - pp. 441-453
DOI: https://doi.org/10.1016/B978-0-12-803581-8.11774-6

Lechner, Annika ; Trossmann, Vanessa T. ; Scheibel, Thomas:
Impact of Cell Loading of Recombinant Spider Silk Based Bioinks on Gelation and Printability.
In: Macromolecular Bioscience. Vol. 22 (2022) Issue 3 . - 2100390.
DOI: https://doi.org/10.1002/mabi.202100390

Dickes, Daniel ; Öztürk, Beyza ; Völkl, Rainer ; Galetz, Mathias ; Glatzel, Uwe:
Improving the Adhesion of a Hard Oxide Layer on Ti6Al4V by a Three-Step Thermal Oxidation Process.
In: Advanced Engineering Materials. Vol. 24 (2022) Issue 3 . - 2100864.
DOI: https://doi.org/10.1002/adem.202100864

Lenz Leite, Mateus ; Degenhardt, Ulrich ; Krenkel, Walter ; Schafföner, Stefan ; Motz, Günter:
In Situ Generated Yb₂Si₂O₇ Environmental Barrier Coatings for Protection of Ceramic Components in the Next Generation of Gas Turbines.
In: Advanced Materials Interfaces. Vol. 9 (2022) Issue 11 . - 2102255.
DOI: https://doi.org/10.1002/admi.202102255

Riedl, Simon ; Völkl, Matthias ; Holzinger, Anja ; Jasinski, Julia ; Jérôme, Valérie ; Scheibel, Thomas ; Feldhaar, Heike ; Freitag, Ruth:
In vitro cultivation of primary intestinal cells from Eisenia fetida as basis for ecotoxicological studies.
In: Ecotoxicology. Vol. 31 (2022) . - pp. 221-233.
DOI: https://doi.org/10.1007/s10646-021-02495-2

Hilzenthaler, Marius ; Scherm, Florian ; Daoud, Haneen ; Glatzel, Uwe:
In-situ decarburization and deoxidation during laser powder bed fusion of water-atomized steel C35.
In: Powder Technology. Vol. 412 (2022) . - 117973.
DOI: https://doi.org/10.1016/j.powtec.2022.117973

Demleitner, Martin ; Schönl, Florian ; Angermann, Jörg ; Fässler, Pascal ; Lamparth, Iris ; Rist, Kai ; Schnur, Thomas ; Catel, Yohann ; Rosenfeldt, Sabine ; Retsch, Markus ; Ruckdäschel, Holger ; Altstädt, Volker:
Influence of Block Copolymer Concentration and Resin Crosslink Density on the Properties of UV-curable Methacrylate Resin Systems.
In: Macromolecular Materials and Engineering. Vol. 307 (2022) Issue 10 . - 2200320.
DOI: https://doi.org/10.1002/mame.202200320

Trusova, Elena A. ; Titov, Dmitrii ; Afzal, Asya M. ; Abramchuk, Sergey S.:
Influence of Graphene Sheets on Compaction and Sintering Properties of Nano-Zirconia Ceramics.
In: Materials. Vol. 15 (2022) Issue 20 . - 7342.
DOI: https://doi.org/10.3390/ma15207342

Öztürk, Beyza ; Mengis, L. ; Dickes, Daniel ; Glatzel, Uwe ; Galetz, Mathias:
Influence of Water Vapor and Temperature on the Oxide Scale Growth and Alpha-Case Formation in Ti-6Al-4V Alloy.
In: Oxidation of Metals. Vol. 97 (2022) . - pp. 241-260.
DOI: https://doi.org/10.1007/s11085-021-10088-x

Walter, Kerstin ; Kokesch-Himmelreich, Julia ; Treu, Axel ; Waldow, Franziska ; Hillemann, Doris ; Jakobs, Nikolas ; Lemm, Ann-Kathrin ; Schwudke, Dominik ; Römpp, Andreas ; Hölscher, Christoph:
Interleukin-13 overexpressing mice represent an advanced pre-clinical model for detecting the distribution of anti-mycobacterial drugs within centrally necrotizing granulomas.
In: Antimicrobial Agents and Chemotherapy. Vol. 66 (2022) Issue 6 . - e01588-21.
DOI: https://doi.org/10.1128/aac.01588-21

Chudej, Kurt ; Thäter, Markus ; Pesch, Hans Josef:
L1-Optimal Vaccination for SEIR Models with Logistic Growth.
In: Wittmann, Jochen ; Wieland, Ralf (ed.): Simulation in den Umwelt- und Geowissenschaften : Workshop Müncheberg 2021. - Düren : Shaker, 2022 . - pp. 189-218

Charpentier Poncelet, Alexandre ; Helbig, Christoph ; Loubet, Philippe ; Beylot, Antoine ; Muller, Stéphanie ; Villeneuve, Jacques ; Laratte, Bertrand ; Thorenz, Andrea ; Tuma, Axel ; Sonnemann, Guido:
Losses and lifetimes of metals in the economy.
In: Nature Sustainability. Vol. 5 (2022) . - pp. 717-726.
DOI: https://doi.org/10.1038/s41893-022-00895-8

Schöpfer, Lion ; Möller, Julia N. ; Steiner, Thomas ; Schnepf, Uwe ; Marhan, Sven ; Resch, Julia ; Bayha, Ansilla ; Löder, Martin G. J. ; Freitag, Ruth ; Brümmer, Franz ; Laforsch, Christian ; Streck, Thilo ; Forberger, Jens ; Kranert, Martin ; Kandeler, Ellen ; Pagel, Holger:
Microplastics persist in an arable soil but do not affect soil microbial biomass, enzyme activities, and crop yield.
In: Journal of Plant Nutrition and Soil Science. Vol. 185 (2022) Issue 6 . - pp. 836-849.
DOI: https://doi.org/10.1002/jpln.202200062

Feng, Bo ; Fetzer, Ann-Katrin ; Ulrich, Anke Silvia ; Galetz, Mathias C. ; Kleebe, Hans-Joachim ; Ionescu, Emanuel:
Monolithic ZrB₂‐based UHTCs using polymer‐derived Si(Zr,B)CN as sintering aid.
In: Journal of the American Ceramic Society. Vol. 105 (2022) Issue 1 . - pp. 99-110.
DOI: https://doi.org/10.1111/jace.18038

Hinrichs, Frauke ; Kauffmann, Alexander ; Tirunilai, Aditya Srinivasan ; Schliephake, Daniel ; Beichert, Bonita ; Winkens, Georg ; Beck, Katharina ; Ulrich, Anke Silvia ; Galetz, Mathias C. ; Long, Zhongmin ; Thota, Hemanth ; Eggeler, Yolita ; Pundt, Astrid ; Heilmaier, Martin:
A novel nitridation- and pesting-resistant Cr-Si-Mo alloy.
In: Corrosion Science. Vol. 207 (2022) . - 110566.
DOI: https://doi.org/10.1016/j.corsci.2022.110566

Pawelski-Höll, Christin:
Novel Thermally Conductive and Flame-Retardant Substrates for Printed Circuit Boards : Structure-Property-Relationships.
Bayreuth , 2022 . - XI, 217 p.
( Doctoral thesis, 2021 , Universität Bayreuth, Fakultät für Ingenieurwissenschaften)
DOI: https://doi.org/10.15495/EPub_UBT_00005944

Petry, Nils-Christian ; Ulrich, Anke Silvia ; Feng, Bo ; Ionescu, Emanuel ; Galetz, Mathias C. ; Lepple, Maren:
Oxidation resistance of ZrB₂‐based monoliths using polymer‐derived Si(Zr,B)CN as sintering aid.
In: Journal of the American Ceramic Society. Vol. 105 (2022) Issue 8 . - pp. 5380-5394.
DOI: https://doi.org/10.1111/jace.18473

Mosbacher, Mike ; Hilzenthaler, Marius ; Galetz, Mathias ; Glatzel, Uwe:
Oxygen Diffusion Hardened Zirconium Alloy ZrNb7 : Tribological Properties Derived from Calo Wear and Wheel on Flat Experiments.
In: Tribology International. Vol. 165 (2022) . - 107304.
DOI: https://doi.org/10.1016/j.triboint.2021.107304

Faghih-Naini, Sara ; Aizinger, Vadym:
p-adaptive discontinuous Galerkin method for the shallow water equations with a parameter-free error indicator.
In: GEM : International Journal on Geomathematics. Vol. 13 (2022) Issue 1 . - 18.
DOI: https://doi.org/10.1007/s13137-022-00208-3

Grenzfurtner, Wolfgang ; Rudberg, Martin ; Mayrhofer, Richard ; Loike, Kristina ; Gronalt, Manfred:
Performance measurement and management practices of on-site activities in industrialized housebuilding.
In: Construction Management and Economics. Vol. 40 (2022) Issue 4 . - pp. 239-253.
DOI: https://doi.org/10.1080/01446193.2022.2037147

Koeck, Kim ; Salehi, Sahar ; Humenik, Martin ; Scheibel, Thomas:
Processing of Continuous Non-Crosslinked Collagen Fibers for Microtissue Formation at the Muscle-Tendon Interface.
In: Advanced Functional Materials. Vol. 32 (2022) Issue 15 . - 2112238.
DOI: https://doi.org/10.1002/adfm.202112238

Ulrich, Anke Silvia ; Knowles, Alexander J. ; Cantatore, Valentina ; Bhowmik, Ayan ; Wharmby, Michael T. ; Geers, Christine ; Panas, Itai ; Galetz, Mathias C.:
Pt accelerated coarsening of A15 precipitates in Cr-Si alloys.
In: Materials & Design. Vol. 218 (2022) . - 110655.
DOI: https://doi.org/10.1016/j.matdes.2022.110655

Bay, Christian ; Grotz, Tim ; Kleylein-Feuerstein, Joachim ; Schorzmann, Johann:
Qualitätssicherung in der additiven Materialextrusion : Anwenderleitfaden für die Serienfertigung.
ed.: Döpper, Frank . Fraunhofer IPA
Stuttgart : Fraunhofer Verlag , 2022 . - 105 p.

Negele, Daniel:
Qualitätswettbewerb im deutschen Gesundheitssystem : Eine internationale Analyse und empirische Ableitung von Weiterentwicklungsvorschlägen.
Bayreuth , 2022 . - XVI, 278 p.
( Doctoral thesis, 2022 , Universität Bayreuth, Rechts- und Wirtschaftswissenschaftliche Fakultät)
DOI: https://doi.org/10.15495/EPub_UBT_00006433

Galetz, Mathias C. ; Ulrich, Anke Silvia ; Hasemann, G. ; Krüger, M.:
Refractory Metal-Based High Entropy Silicide-Borides: The Future of Materials Beyond MoSiB?
In: Intermetallics. Vol. 148 (2022) . - 107620.
DOI: https://doi.org/10.1016/j.intermet.2022.107620

Neubauer, Vanessa J.:
Rekombinante Spinnenseidenproteine und Biomineralisation für technische und biomedizinische Anwendungen.
Bayreuth , 2022 . - 184 p.
( Doctoral thesis, 2021 , Universität Bayreuth, Bayreuther Graduiertenschule für Mathematik und Naturwissenschaften - BayNAT)
DOI: https://doi.org/10.15495/EPub_UBT_00005710

Riedl, Simon ; Jérôme, Valérie ; Freitag, Ruth:
Repeated Transient Transfection : An Alternative for the Recombinant Production of Difficult-to-Express Proteins Like BMP2.
In: Processes. Vol. 10 (2022) Issue 6 . - 1064.
DOI: https://doi.org/10.3390/pr10061064

Standau, Tobias ; Nofar, Mohammadreza ; Dörr, Dominik ; Ruckdäschel, Holger ; Altstädt, Volker:
A Review on Multifunctional Epoxy-Based Joncryl® ADR Chain Extended Thermoplastics.
In: Polymer Reviews. Vol. 62 (2022) Issue 2 . - pp. 296-350.
DOI: https://doi.org/10.1080/15583724.2021.1918710

Schwarzer, Michael ; Brehm, Julian ; Vollmer, Martina ; Jasinski, Julia ; Xu, Chengzhang ; Zainuddin, Shakir ; Fröhlich, Thomas ; Schott, Matthias ; Greiner, Andreas ; Scheibel, Thomas ; Laforsch, Christian:
Shape, size, and polymer dependent effects of microplastics on Daphnia magna.
In: Journal of Hazardous Materials. Vol. 426 (2022) . - 128136.
DOI: https://doi.org/10.1016/j.jhazmat.2021.128136

Lang, Gregor ; Grill, Carolin ; Scheibel, Thomas:
Site-Specific Functionalization of Recombinant Spider Silk Janus Fibers.
In: Angewandte Chemie International Edition. Vol. 61 (2022) Issue 11 . - e202115232.
DOI: https://doi.org/10.1002/anie.202115232

Ramsperger, Anja ; Jasinski, Julia ; Völkl, Matthias ; Witzmann, Thomas ; Meinhart, Marcel ; Jérôme, Valérie ; Kretschmer, Winfried ; Freitag, Ruth ; Senker, Jürgen ; Fery, Andreas ; Kress, Holger ; Scheibel, Thomas ; Laforsch, Christian:
Supposedly identical microplastic particles substantially differ in their material properties influencing particle-cell interactions and cellular responses.
In: Journal of Hazardous Materials. Vol. 425 (2022) . - 127961.
DOI: https://doi.org/10.1016/j.jhazmat.2021.127961

Jasinski, Julia ; Wilde, Magdalena V. ; Völkl, Matthias ; Jérôme, Valérie ; Fröhlich, Thomas ; Freitag, Ruth ; Scheibel, Thomas:
Tailor-Made Protein Corona Formation on Polystyrene Microparticles and its Effect on Epithelial Cell Uptake.
In: ACS Applied Materials & Interfaces. Vol. 14 (2022) Issue 41 . - pp. 47277-47287.
DOI: https://doi.org/10.1021/acsami.2c13987

Lee, Chi-Hung ; Chin, Hsu-Hsuan ; Zeng, Kun-Yuan ; Chang, Yao-Jen ; Yeh, An-Chou ; Yeh, Jien-Wei ; Lin, Su-Jien ; Wang, Chun-Chieh ; Glatzel, Uwe ; Huang, E-Wen:
Tailoring Ferrimagnetic Transition Temperatures, Coercivity Fields, and Saturation Magnetization by Modulating Mn Concentration in (CoCrFeNi)₁₋ₓMnₓ High-Entropy Alloys.
In: Frontiers in Materials. Vol. 9 (2022) . - 824285.
DOI: https://doi.org/10.3389/fmats.2022.824285

Liu, Che-Jen ; Gadelmeier, Christian ; Lu, Shao-Lun ; Yeh, Jien-Wei ; Yen, Hung-Wei ; Gorsse, Stéphane ; Glatzel, Uwe ; Yeh, An-Chou:
Tensile creep behavior of HfNbTaTiZr refractory high entropy alloy at elevated temperatures.
In: Acta Materialia. Vol. 237 (2022) . - 118188.
DOI: https://doi.org/10.1016/j.actamat.2022.118188

Helbig, Christoph ; Huether, Jonas ; Joachimsthaler, Charlotte ; Lehmann, Christian ; Raatz, Simone ; Thorenz, Andrea ; Faulstich, Martin ; Tuma, Axel:
A terminology for downcycling.
In: Journal of Industrial Ecology. Vol. 26 (2022) Issue 4 . - pp. 1164-1174.
DOI: https://doi.org/10.1111/jiec.13289

Shen, Bo-Wen ; Pielke, Roger A., Sr. ; Zeng, Xubin ; Cui, Jialin ; Faghih-Naini, Sara ; Paxson, Wei ; Atlas, Robert:
Three Kinds of Butterfly Effects within Lorenz Models.
In: Encyclopedia. Vol. 2 (2022) Issue 3 . - pp. 1250-1259.
DOI: https://doi.org/10.3390/encyclopedia2030084

Huisl, Jonas ; Fichtner, Myriel ; Eisenhuth, Philipp ; Baumann, Oliver ; Schönfeld, Mirco ; Jablonski, Stefan ; Samimi, Cyrus:
Towards an Integrated and Contextualized Research Data Management at the Cluster of Excellence Africa Multiple.
In: Dreiser, Anja R. ; Samimi, Cyrus ; Institute of African Studies, University of Bayreuth (ed.): Frontiers in African Digital Research : Conference Proceedings. - Bayreuth , 2022 . - pp. 155-172 . - (University of Bayreuth African Studies Online ; 9 )
DOI: https://doi.org/10.15495/EPub_UBT_00005720

Inui, Haruyuki ; Kishida, Kyosuke ; Li, Le ; Manzoni, Anna M. ; Haas, Sebastian ; Glatzel, Uwe:
Uniaxial Mechanical Properties of Face-Centered Cubic Single- and Multiphase High-Entropy Alloys.
In: MRS Bulletin. Vol. 47 (2022) Issue 2 . - pp. 168-174.
DOI: https://doi.org/10.1557/s43577-022-00280-y

Zhang, Jingfeng ; Gadelmeier, Christian ; Sen, Sandipan ; Wang, Rui ; Zhang, Xi ; Zhong, Yu ; Glatzel, Uwe ; Grabowski, Blazej ; Wilde, Gerhard ; Divinski, Sergiy V.:
Zr diffusion in BCC refractory high entropy alloys: A case of "non-sluggish" diffusion behavior.
In: Acta Materialia. Vol. 233 (2022) . - 117970.
DOI: https://doi.org/10.1016/j.actamat.2022.117970

Freudenberg, Wolfgang ; Wich, Felix ; Langhof, Nico ; Schafföner, Stefan:
Additive manufacturing of carbon fiber reinforced ceramic matrix composites based on fused filament fabrication.
In: Journal of the European Ceramic Society. Vol. 42 (2022) Issue 4 . - pp. 1822-1828.
DOI: https://doi.org/10.1016/j.jeurceramsoc.2021.12.005

Mahr, Alexander ; Koller, Jan ; Tarasova, Anna ; Taumann, Sarah ; Lingner, Andreas ; Lück, Thomas ; Walczak, Philipp ; Flothow, Abraham ; Walczak, Michael:
Additive Refabrikation in der Elektrofahrradbranche : Werterhaltung in der urbanen Elektromobilität mittels additiver Refabrikation.
Bayreuth ; Heidelberg ; Heimsheim ; Augsburg 2022 . - 27 p.

Festor, Paul ; Jia, Yan ; Gordon, Anthony C. ; Faisal, A. Aldo ; Habli, Ibrahim ; Komorowski, Matthieu:
Assuring the safety of AI-based clinical decision support systems : a case study of the AI Clinician for sepsis treatment.
In: BMJ Health & Care Informatics. Vol. 29 (2022) Issue 1 . - e100549.
DOI: https://doi.org/10.1136/bmjhci-2022-100549

Aurbach, Franziska:
Backward Bifurkation bei Impfung gegen eine invasive Krankheit.
Bayreuth , 2022
(Master's, 2022 , Universität Bayreuth, Fakultät für Mathematik, Physik und Informatik, Lehrstuhl für Wissenschaftliches Rechnen)

Scheibel, Thomas ; Trossmann, Vanessa T. ; Lechner, Annika ; Bargel, Hendrik ; Humenik, Martin ; Žurovec, Michael:
Bioinspirierte Klebstoffe zur Anwendung in wässrigen Flüssigkeiten.
In: Adhäsion. Vol. 66 (2022) Issue 1-2 . - pp. 34-39.
DOI: https://doi.org/10.1007/s35145-022-0554-6

Yadzhak, Nataliya ; Andreykiv, Oleksandr ; Dolinska, Iryna:
Calculational models for mode II and mode III small fatigue crack growth in structural elements.
In: Archive of Applied Mechanics. Vol. 92 (2022) Issue 4 . - pp. 1273-1286.
DOI: https://doi.org/10.1007/s00419-022-02104-6

Honeyford, Kate ; Expert, Paul ; Mendelsohn, Estera ; Post, B. ; Faisal, A. Aldo ; Glampson, B. ; Mayer, Erik ; Costelloe, C. E.:
Challenges and recommendations for high quality research using electronic health records.
In: Frontiers in Digital Health. Vol. 4 (2022) . - 940330.
DOI: https://doi.org/10.3389/fdgth.2022.940330

Zainuddin, Shakir ; Scheibel, Thomas:
Continuous Yarn Electrospinning.
In: Textiles. Vol. 2 (2022) Issue 1 . - pp. 124-141.
DOI: https://doi.org/10.3390/textiles2010007

Chen, Zhe ; Yan, Wen ; Schafföner, Stefan ; Li, Yawei ; Nath, Mithun ; Zhu, Chengyi:
Enhanced mechanical properties of lightweight Al₂O₃‐C refractories reinforced by combined one‐dimensional ceramic phases.
In: International Journal of Applied Ceramic Technology. Vol. 19 (2022) Issue 3 . - pp. 1613-1625.
DOI: https://doi.org/10.1111/ijac.13933

Gottwalt, Albin ; Kubaschinski, Paul ; Waltz, Manuela ; Glatzel, Uwe ; Tetzlaff, Ulrich:
An Experimental Setup for Fatigue Testing of Thin Electrical Steel Sheets.
In: International Journal of Fatigue. Vol. 162 (2022) . - 106987.
DOI: https://doi.org/10.1016/j.ijfatigue.2022.106987

Uwanyuze, R. Sharon ; Alpay, S. Pamir ; Schafföner, Stefan ; Sahoo, Sanjubala:
A first principles analysis of oxidation in titanium alloys with aluminum and vanadium.
In: Surface Science. Vol. 719 (2022) . - 122026.
DOI: https://doi.org/10.1016/j.susc.2022.122026

Kushioka, Junichi ; Sun, Ruopeng ; Zhang, Wei ; Muaremi, Amir ; Leutheuser, Heike ; Odonkor, Charles A. ; Smuck, Matthew:
Gait variability to phenotype common orthopedic gait impairments using wearable sensors.
In: Sensors. Vol. 22 (2022) Issue 23 . - 9301.
DOI: https://doi.org/10.3390/s22239301

Lenz Leite, Mateus ; Schlesinger, Philipp ; Sheridan, Michael ; Zahedtalaban, Mohamad ; Seitz, Daniel ; Schafföner, Stefan ; Motz, Günter:
Hybrid copper(II)acrylate/silazane thin coatings with hydrophobic and germicidal properties.
In: Progress in Organic Coatings. Vol. 166 (2022) . - 106791.
DOI: https://doi.org/10.1016/j.porgcoat.2022.106791

Chen, Zhenghao ; Kishida, Kyosuke ; Inui, Haruyuki ; Heilmaier, Martin ; Glatzel, Uwe ; Eggeler, Gunther:
Improving the Intermediate- and High-Temperature Strength of L1₂-Co₃(Al,W) by Ni and Ta Additions.
In: Acta Materialia. Vol. 238 (2022) . - 118224.
DOI: https://doi.org/10.1016/j.actamat.2022.118224

Jaeger, Katharina M. ; Nissen, Michael ; Richer, Robert ; Rahm, Simone ; Titzmann, Adriana ; Fasching, Peter A. ; Eskofier, Björn M. ; Leutheuser, Heike:
Machine learning-based detection of in-utero fetal presentation from non-invasive fetal ECG.
In: 2022 IEEE-EMBS International Conference on Biomedical and Health Informatics (BHI) : proceedings. - Piscataway, NJ : IEEE, 2022 . - 01-04
DOI: https://doi.org/10.1109/BHI56158.2022.9926804

Harston, J. Alex ; Faisal, A. Aldo:
Methods and Models of Eye-Tracking in Natural Environments.
In: Stuart, Samuel (ed.): Eye Tracking : Background, Methods, and Applications. - New York : Humana Press, 2022 . - pp. 49-68 . - (Neuromethods ; 183 )
DOI: https://doi.org/10.1007/978-1-0716-2391-6_4

Wang, Shihua ; Yan, Wen ; Yan, Junjie ; Schafföner, Stefan ; Chen, Zhe ; Sang, Shaobai:
Microstructures and properties of microporous mullite‐corundum aggregates for lightweight refractories.
In: International Journal of Applied Ceramic Technology. Vol. 19 (2022) Issue 6 . - pp. 3300-3310.
DOI: https://doi.org/10.1111/ijac.14123

Chen, Qianlin ; Yan, Wen ; Yan, Junjie ; Schafföner, Stefan ; Chen, Zhe ; Ma, Sanbao ; Li, Guangqiang:
Microstructures and strengths of microporous MgO–Al₂O₃ ceramics from Al(OH)₃ and calcined magnesite.
In: Journal of the American Ceramic Society. Vol. 105 (2022) Issue 12 . - pp. 7741-7750.
DOI: https://doi.org/10.1111/jace.18683

Festor, Paul ; Shafti, Ali ; Harston, Alex ; Li, Michey ; Orlov, Pavel ; Faisal, A. Aldo:
MIDAS: Deep learning human action intention prediction from natural eye movement patterns.
arXiv , 2022
DOI: https://doi.org/10.48550/arXiv.2201.09135

Yadzhak, Nataliya ; Andreykiv, Oleksandr ; Lapusta, Yuri:
Modelling small fatigue crack propagation under mixed mode II+III loading.
In: Procedia Structural Integrity. Vol. 36 (2022) . - pp. 401-407.
DOI: https://doi.org/10.1016/j.prostr.2022.01.052

Currie, Stephen P. ; Ammer, Julian J. ; Premchand, Brian ; Dacre, Joshua ; Wu, Yufei ; Eleftheriou, Constantinos ; Colligan, Matt ; Clarke, Thomas ; Mitchell, Leah ; Faisal, A. Aldo ; Hennig, Matthias H. ; Duguid, Ian:
Movement-specific signaling is differentially distributed across motor cortex layer 5 projection neuron classes.
In: Cell Reports. Vol. 39 (2022) Issue 6 . - 110801.
DOI: https://doi.org/10.1016/j.celrep.2022.110801

Subramanian, Mahendran ; Faisal, A. Aldo:
Natural Gaze Informatics : Toward Intelligence Assisted Wheelchair Mobility.
In: Stuart, Samuel (ed.): Eye Tracking : Background, Methods, and Applications. - New York : Humana Press, 2022 . - pp. 97-112 . - (Neuromethods ; 183 )
DOI: https://doi.org/10.1007/978-1-0716-2391-6_6

Wendel, Jan-Felix ; Lenz Leite, Mateus ; Furtat, Plinio ; Tangermann‐Gerk, Katja ; Schafföner, Stefan ; Motz, Günter:
New Coatings Systems with Improved Mechanical Properties by Combining Polymer Derived Ceramic and Physical Vapor Deposition Coating Methods.
In: Advanced Materials Interfaces. Vol. 9 (2022) Issue 34 . - 2201654.
DOI: https://doi.org/10.1002/admi.202201654

Wu, Han ; Chen, Zhe ; Yan, Wen ; Schafföner, Stefan ; Wu, Guiyuan ; Dai, Yajie ; Li, Yawei:
A novel lightweight periclase-composite (Mg₈₋ₓFeₓ₊ᵧAl₁₆₋ᵧO₃₂) spinel refractory material for cement rotary kilns.
In: Ceramics International. Vol. 48 (2022) Issue 1 . - pp. 615-623.
DOI: https://doi.org/10.1016/j.ceramint.2021.09.140

Folger, Gaby ; Chudej, Kurt:
Numerical Simulation of a Four Serotype Dengue Fever Model.
In: Ehrhardt, Matthias ; Günther, Michael (ed.): Progress in Industrial Mathematics at ECMI 2021 : selected and revised papers. - Cham : Springer, 2022 . - pp. 61-66 . - (Mathematics in Industry ; 39 )
DOI: https://doi.org/10.1007/978-3-031-11818-0_9

Blum, Kyle P. ; Grogan, Max ; Wu, Yufei ; Harston, J. Alex ; Miller, Lee E. ; Faisal, A. Aldo:
Predicting proprioceptive cortical anatomy and neural coding with topographic autoencoders.
bioRxiv , 2022
DOI: https://doi.org/10.1101/2021.12.10.472161

Völkl, Matthias ; Jérôme, Valérie ; Weig, Alfons ; Jasinski, Julia ; Meides, Nora ; Strohriegl, Peter ; Scheibel, Thomas ; Freitag, Ruth:
Pristine and artificially-aged polystyrene microplastic particles differ in regard to cellular response.
In: Journal of Hazardous Materials. Vol. 435 (2022) . - 128955.
DOI: https://doi.org/10.1016/j.jhazmat.2022.128955

Andreykiv, Oleksandr ; Babii, Andrii ; Dolinska, Iryna ; Yadzhak, Nataliya ; Babii, Mariia:
Residual lifetime prediction of field sprayer booms under the action of manoeuvre loading and corrosive environment.
In: Procedia Structural Integrity. Vol. 36 (2022) . - pp. 36-42.
DOI: https://doi.org/10.1016/j.prostr.2021.12.080

Shafti, Ali ; Derks, Victoria ; Kay, Hannah ; Faisal, A. Aldo:
The response shift paradigm to quantify human trust in AI recommendations.
arXiv , 2022
DOI: https://doi.org/10.48550/arXiv.2202.08979

Lee, Jia Hui:
Rodent Trapping and the Just Possible.
In: Chao, Sophie ; Bolender, Karin ; Kirksey, Eben (ed.): The Promise of Multispecies Justice. - Durham, N.C. : Duke University Press, 2022 . - pp. 157-178

Liu, Yiming ; Leib, Raz ; Dudley, William ; Shafti, Ali ; Faisal, A. Aldo ; Franklin, David W.:
The role of haptic communication in dyadic collaborative object manipulation tasks.
arXiv , 2022
DOI: https://doi.org/10.48550/arXiv.2203.01287

Lang, Gregor ; Grill, Carolin ; Scheibel, Thomas:
Seitenspezifische Funktionalisierung von Janusfasern aus rekombinanter Spinnenseide.
In: Angewandte Chemie. Vol. 134 (2022) Issue 11 . - e202115232.
DOI: https://doi.org/10.1002/ange.202115232

Milkin, Pavel ; Danzer, Michael A. ; Ionov, Leonid:
Self-Healing and Electrical Properties of Viscoelastic Polymer-Carbon Blends.
In: Macromolecular Rapid Communications. Vol. 43 (2022) Issue 19 . - 2200307.
DOI: https://doi.org/10.1002/marc.202200307

Riese, Cornelius N. ; Wittchen, Manuel ; Jérôme, Valérie ; Freitag, Ruth ; Busche, Tobias ; Kalinowski, Jörn ; Schüler, Dirk:
The transcriptomic landscape of Magnetospirillum gryphiswaldense during magnetosome biomineralization.
In: BMC Genomics. Vol. 23 (2022) . - 699.
DOI: https://doi.org/10.1186/s12864-022-08913-x

Chen, Zhe ; Yan, Wen ; Schafföner, Stefan ; Zhi, Jinna ; Li, Nan:
Vacuum impregnation treatment of microporous Al₂O₃-MgAl₂O₄ refractory raw materials with sub-micron pores and high strength.
In: Journal of the European Ceramic Society. Vol. 42 (2022) Issue 12 . - pp. 5145-5152.
DOI: https://doi.org/10.1016/j.jeurceramsoc.2022.05.044

Chan, Nicholas J. ; Lentz, Sarah ; Gurr, Paul A. ; Tan, Shereen ; Scheibel, Thomas ; Qiao, Greg G.:
Vernetzte Polypeptide durch RAFT-vermittelte Polymerisation zum kontinuierlichen Aufbau von Polymerfilmen.
In: Angewandte Chemie. Vol. 134 (2022) Issue 9 . - e202112842.
DOI: https://doi.org/10.1002/ange.202112842

2021

Vysoudil, Filip ; Hansen, Sönke ; Mennenga, Mark ; Fukuda, Maho ; Ohnemüller, Gregor ; Rüther, Tom ; Goers, Dietrich ; Koller, Jan ; Nikolowski, Kristian ; Rosemann, Bernd ; Wolter, Mareike ; Danzer, Michael A. ; Döpper, Frank ; Herrmann, Christoph ; Vietor, Thomas:
Procedure Model to support the Recycling-oriented Design of Lithium-Ion Batteries for Electric Vehicles.
2021
Event: Going Green – Ecodesig 2021 , 01-03.12.2021 , Online Conference.
(Conference item: Conference , Paper )

Grenzfurtner, Wolfgang:
Continuous improvement within industrialised housebuilding on-site production.
Wien : EPub Universität für Bodenkultur , 2021 . - IX, 128 p.
( Doctoral thesis, 2021 , Universität für Bodenkultur Wien)

Glamsch, Johannes ; Hüter, Florian ; Tremmel, Stephan:
Automatisierte Simulation von Sandwichbauteilen mit Z88Aurora®.
2021
Event: 22. Bayreuther 3D-Konstrukteurstag 2021 , 15.09.2021 , digital.
(Conference item: Conference , Speech )

Bay, Christian:
Nachhaltige additive Innovationen durch interdisziplinäres Mindset.
2021
Event: 22. Bayreuther 3D-Konstrukteurstag 2021 , 15.09.2021 , digital.
(Conference item: Conference , Speech )

Bay, Christian:
Wie Sie durch ein interdisziplinäres Mindset nachhaltige additive Innovationen generieren.
2021
Event: 5th Additive Manufacturing Forum Digital Edition 2021 , 22.–23. Juli 2021 , Berlin / digital.
(Conference item: Conference , Speech )

Kühlmann, Torsten M. ; Becker, Julia ; Brinkmann, Manuel ; Derra, Nicholas Daniel ; Eimecke, Jörgen ; Rath, Simon ; Hofmann, Anni ; Schweizer, Elisabeth:
BF/M-Spiegel: Journal des Betriebswirtschaftlichen Forschungszentrums für Fragen der mittelständischen Wirtschaft e. V. an der Universität Bayreuth,Juli 2021, Ausgabe 1.
BF/M-Spiegel. (2021) Issue 1 . - 59 p.
DOI: https://doi.org/10.15495/EPub_UBT_00005822

Faghih-Naini, Sara ; Aizinger, Vadym ; Kuckuk, Sebastian ; Zint, Daniel ; Köstler, Harald ; Grosso, Roberto:
Code Generation for quadrature-free Discontinuous Galerkin Discretizations of the Shallow-water Equations.
2021
Event: Platform for Advanced Scientific Computing (PASC) Conference 2021 , 05.-09. July 2020 , Online-Conference.
(Conference item: Conference , Poster )

Mahr, Alexander ; Hofmann, Andreas:
Nachbearbeitungsverfahren in der additiven Fertigung : Mikrostrahlen, Plasmapolieren oder Gleitschleifen?
In: MAV : Innovation in der spanenden Fertigung. (July 2021) Issue 6 .

Faghih-Naini, Sara ; Kuckuk, Sebastian ; Zint, Daniel ; Aizinger, Vadym ; Köstler, Harald ; Grosso, Roberto ; Kenter, Tobias ; Shambhu, Adesh:
Combining hardware, software, and numerical methodologies to improve computational performance of a discontinuous Galerkin shallow water model.
2021
Event: SIAM Conference on Mathematical & Computational Issues in the Geosciences (GS21) , 21.-24. June 2021 , Online-Conference.
(Conference item: Conference , Speech )

Dudley, W. L. ; Shafti, Ali ; Faisal, A. Aldo:
Real-world to virtual : ﬂexible and scalable investigations of human-agent collaboration.
2021
Event: ACM CHI Workshop on Reinforcement Learning for Humans, Computing, and Interaction , 08.-13.05.2021 , online.
(Conference item: Workshop , Paper )

Breuer, Andras ; Doevenspeck, Martin ; Donko, Kamal ; Ouedraogo, Serge:
COVID-19 and (Im)mobilities in West Africa.
ed.: Maurus, Sabrina
Bayreuth : Institute of African Studies, 2021 . - XIV, 153 p. - (University of Bayreuth African Studies Working Papers ; 26 )
DOI: https://doi.org/10.15495/EPub_UBT_00005670

Höschler, Lucas ; Michel, Frank ; Frisch, Michael:
Zum Einfluss des Beckengurts auf die Rucksackstabilität beim Mountainbiken.
2021
Event: 12. Kongress der Deutschen Gesellschaft für Biomechanik e.V. , 17. März 2021 , Online.
(Conference item: Conference , Speech )

Körber, Selina ; Völkl, Rainer ; Glatzel, Uwe:
3D printed polymer positive models for the investment casting of extremely thin-walled single crystals.
In: Journal of Materials Processing Technology. Vol. 293 (2021) . - 117095.
DOI: https://doi.org/10.1016/j.jmatprotec.2021.117095

Brütting, Christian ; Dreier, J. ; Bonten, C. ; Altstädt, Volker ; Ruckdäschel, Holger:
Amorphous Polylactide Bead Foam : Effect of Talc and Chain Extension on Foaming Behavior and Compression Properties.
In: Journal of Renewable Materials. Vol. 9 (2021) Issue 11 . - pp. 1859-1868.
DOI: https://doi.org/10.32604/jrm.2021.016244

Diaz Ariza, Ivonne L. ; Jérôme, Valérie ; Pérez Pérez, León D. ; Freitag, Ruth:
Amphiphilic Graft Copolymers Capable of Mixed-Mode Interaction as Alternative Nonviral Transfection Agents.
In: ACS Applied Bio Materials. Vol. 4 (2021) Issue 2 . - pp. 1268-1282.
DOI: https://doi.org/10.1021/acsabm.0c01123

Selvakumar, Murugesan ; Scheibel, Thomas:
Chitosan-based nanocomposites for medical applications.
In: Journal of Polymer Science. Vol. 59 (2021) Issue 15 . - pp. 1610-1642.
DOI: https://doi.org/10.1002/pol.20210251

Esser, Tilman U. ; Trossmann, Vanessa T. ; Lentz, Sarah ; Engel, Felix B. ; Scheibel, Thomas:
Designing of spider silk proteins for human induced pluripotent stem cell-based cardiac tissue engineering.
In: Materials Today Bio. Vol. 11 (2021) . - 100114.
DOI: https://doi.org/10.1016/j.mtbio.2021.100114

Diaz, Ivonne L. ; Jérôme, Valérie ; Freitag, Ruth ; Perez, León D.:
Development of poly(ethyleneimine) grafted amphiphilic copolymers : Evaluation of their cytotoxicity and ability to complex DNA.
In: Journal of Bioactive and Compatible Polymers. Vol. 36 (2021) Issue 6 . - pp. 447-463.
DOI: https://doi.org/10.1177/08839115211053925

Hofmaier, Mirjam ; Urban, Birgit ; Lentz, Sarah ; Borkner, Christian B. ; Scheibel, Thomas ; Fery, Andreas ; Müller, Martin:
Dichroic Fourier Transform Infrared Spectroscopy Characterizationof the β‑Sheet Orientation in Spider Silk Films on Silicon Substrates.
In: The Journal of Physical Chemistry B. Vol. 125 (2021) Issue 4 . - pp. 1061-1071.
DOI: https://doi.org/10.1021/acs.jpcb.0c09395

Mathes, Johanna:
Digitalisierung im Gesundheitswesen – Stakeholderbezogene Implementierungshürden entlang des Versorgungsprozesses am Beispiel der Arzneimitteltherapiesicherheit.
Bayreuth , 2021 . - X,194 p.
( Doctoral thesis, 2021 , Universität Bayreuth, Rechts- und Wirtschaftswissenschaftliche Fakultät)
DOI: https://doi.org/10.15495/EPub_UBT_00005342

Ulrich, Anke Silvia ; Glatzel, Uwe ; Galetz, Mathias C.:
Discontinuities in Oxidation Kinetics : A New Model and its Application to Cr–Si-Base Alloys.
In: Oxidation of Metals. Vol. 95 (2021) Issue 5 . - pp. 445-465.
DOI: https://doi.org/10.1007/s11085-021-10029-8

Koedel, Justus ; Seibt, Sebastian ; Callsen, Christoph ; Puchtler, Florian ; Weise, Markus ; Weidinger, Andy ; Altstädt, Volker ; Ruckdäschel, Holger ; Schobert, Rainer ; Biersack, Bernhard:
DNA as a Natural Flame Retardant for Cellulose Acetate Polymer Mixtures.
In: ChemistrySelect. Vol. 6 (2021) Issue 15 . - pp. 3605-3609.
DOI: https://doi.org/10.1002/slct.202004493

Jahns, Katrin ; Ulrich, Anke Silvia ; Schlereth, Clara ; Reiff, Lukas ; Krupp, Ulrich ; Galetz, Mathias C.:
The Effect of Cu Content and Surface Finish on the Metal Dusting Resistance of Additively Manufactured NiCu Alloys.
In: Oxidation of Metals. Vol. 96 (2021) Issue 3 . - pp. 241-256.
DOI: https://doi.org/10.1007/s11085-021-10037-8

Müller, Claudia ; Trujillo-Miranda, Mairon ; Maier, Michael ; Heath, Daniel E. ; O'Connor, Andrea J. ; Salehi, Sahar:
Effects of External Stimulators on Engineered Skeletal Muscle Tissue Maturation.
In: Advanced Materials Interfaces. Vol. 8 (2021) Issue 1 . - 2001167.
DOI: https://doi.org/10.1002/admi.202001167

Riegraf, Matthias ; Bombarda, Ilaria ; Dömling, Ferdinand ; Liensdorf, Tom ; Sitzmann, Carolin ; Langhof, Nico ; Schafföner, Stefan ; Han, Feng ; Sata, Noriko ; Geipel, Christian ; Walter, Christian ; Costa, Rémi:
Enhancing the Mechanical Strength of Electrolyte-Supported Solid Oxide Cells with Thin and Dense Doped-Ceria Interlayers.
In: ACS Applied Materials & Interfaces. Vol. 13 (2021) Issue 42 . - pp. 49879-49889.
DOI: https://doi.org/10.1021/acsami.1c13899

Steiniger, Birte S. ; Pfeffer, Henriette ; Guthe, Michael ; Lobachev, Oleg:
Exploring human splenic red pulp vasculature in virtual reality : details of sheathed capillaries and the open capillary network.
In: Histochemistry and Cell Biology. Vol. 155 (2021) Issue 3 . - pp. 341-354.
DOI: https://doi.org/10.1007/s00418-020-01924-3

Mattar, Nour ; Langlois, Valérie ; Renard, Estelle ; Rademacker, Tim ; Hübner, Fabian ; Demleitner, Martin ; Altstädt, Volker ; Ruckdäschel, Holger ; Rios de Anda, Agustin:
Fully Bio-Based Epoxy-Amine Thermosets Reinforced with Recycled Carbon Fibers as a Low Carbon-Footprint Composite Alternative.
In: ACS Applied Polymer Materials. Vol. 3 (2021) Issue 1 . - pp. 426-435.
DOI: https://doi.org/10.1021/acsapm.0c01187

Keim, Daniel ; Gollner, Katrin ; Gollner, Ulrich ; Jérôme, Valérie ; Freitag, Ruth:
Generation of Recombinant Primary Human B Lymphocytes Using Non-Viral Vectors.
In: International Journal of Molecular Sciences. Vol. 22 (2021) Issue 15 . - 8239.
DOI: https://doi.org/10.3390/ijms22158239

Taheriniya, Shabnam ; Davani, Farnaz A. ; Hilke, Sven ; Hepp, Marco ; Gadelmeier, Christian ; Chellali, Mohammed Reda ; Boll, Torben ; Rösner, Harald ; Peterlechner, Martin ; Gammer, Christoph ; Divinski, Sergiy V. ; Butz, Benjamin ; Glatzel, Uwe ; Hahn, Horst ; Wilde, Gerhard:
High entropy alloy nanocomposites produced by high pressure torsion.
In: Acta Materialia. Vol. 208 (2021) . - 116714.
DOI: https://doi.org/10.1016/j.actamat.2021.116714

Menzel, Teresa ; Weigert, Sebastian ; Gagsteiger, Andreas ; Eich, Yannik ; Sittl, Sebastian ; Papastavrou, Georg ; Ruckdäschel, Holger ; Altstädt, Volker ; Höcker, Birte:
Impact of Enzymatic Degradation on the Material Properties of Poly(Ethylene Terephthalate).
In: Polymers. Vol. 13 (2021) Issue 22 . - 3885.
DOI: https://doi.org/10.3390/polym13223885

Firlus, Konstantin ; Völkl, Rainer ; Gabel, Johannes ; Glatzel, Uwe:
The Influence of Cr, Al, Co, Fe and C on Negative Creep of Waspaloy.
In: International Journal of Materials Research. Vol. 112 (2021) Issue 2 . - pp. 90-97.
DOI: https://doi.org/10.1515/ijmr-2020-7980

Haas, Sebastian ; Manzoni, Anna M. ; Holzinger, Markus ; Glatzel, Uwe:
Influence of high melting elements on microstructure, tensile strength and creep resistance of the compositionally complex alloy Al₁₀Co₂₅Cr₈Fe₁₅Ni₃₆Ti₆.
In: Materials Chemistry and Physics. Vol. 274 (2021) . - 125163.
DOI: https://doi.org/10.1016/j.matchemphys.2021.125163

Kuhnigk, Justus ; Raps, Daniel ; Standau, Tobias ; Luik, Marius ; Altstädt, Volker ; Ruckdäschel, Holger:
Insights into the Bead Fusion Mechanism of Expanded Polybutylene Terephthalate (E-PBT).
In: Polymers. Vol. 13 (2021) Issue 4 . - 582.
DOI: https://doi.org/10.3390/polym13040582

Saric, Merisa ; Eisoldt, Lukas ; Döring, Volker ; Scheibel, Thomas:
Interplay of Different Major Ampullate Spidroins during Assembly and Implications for Fiber Mechanics.
In: Advanced Materials. Vol. 33 (2021) Issue 9 . - 2006499.
DOI: https://doi.org/10.1002/adma.202006499

Bernauer, Christian ; Grohmann, Sandra ; Angermann, Philipp ; Dickes, Daniel ; Holzberger, Florian ; Amend, Pierre ; Zäh, Michael F.:
Investigation of the Cause-Effect Relationships between the Exothermic Reaction and the Microstructures of Reactive Ni-Al Particles Produced by High Energy Planetary Ball Milling.
In: Metals. Vol. 11 (2021) Issue 6 . - 876.
DOI: https://doi.org/10.3390/met11060876

Shen, Bo-Wen ; Pielke, Roger A., Sr. ; Zeng, Xubin ; Baik, Jong-Jin ; Faghih-Naini, Sara ; Cui, Jialin ; Atlas, Robert:
Is Weather Chaotic? : Coexistence of Chaos and Order within a Generalized Lorenz Model.
In: Bulletin of the American Meteorological Society. Vol. 102 (2021) Issue 1 . - E148-E158.
DOI: https://doi.org/10.1175/BAMS-D-19-0165.1

Helm, Moritz ; Riedl, Simon ; Gollner, Katrin ; Gollner, Ulrich ; Jérôme, Valérie ; Freitag, Ruth:
Isolation of primary human B lymphocytes from tonsils compared to blood as alternative source for ex vivo application.
In: Journal of Chromatography B. Vol. 1179 (2021) . - 122853.
DOI: https://doi.org/10.1016/j.jchromb.2021.122853

Bay, Christian ; Mahr, Alexander ; Groneberg, Hajo ; Döpper, Frank:
Lean Production to Increase Reproducibility and Work Safety in the Laser Beam Melting Process Chain.
In: International Journal of Industrial and Manufacturing Engineering. Vol. 15 (2021) Issue 6 . - pp. 278-283.

Sommer, Christoph ; Bargel, Hendrik ; Raßmann, Nadine ; Scheibel, Thomas:
Microbial repellence properties of engineered spider silk coatings prevent biofilm formation of opportunistic bacterial strains.
In: MRS Communications. Vol. 11 (2021) Issue 3 . - pp. 356-362.
DOI: https://doi.org/10.1557/s43579-021-00034-y

Mahr, Alexander ; Hofmann, Andreas:
Nachbearbeitungsverfahren in der additiven Fertigung : Mikrostrahlen, Plasmapolieren oder Gleitschleifen?
In: additive : Das Magazin für generative Fertigung. (2021) Issue 2 . - pp. 14-16.

Haderer, Marika ; Neubert, Philip ; Rinner, Eva ; Scholtis, Annika ; Broncy, Lucile ; Gschwendtner, Heidi ; Kandulski, Arne ; Pavel, Vlad ; Mehrl, Alexander ; Brochhausen, Christoph ; Schlosser, Sophie ; Gülow, Karsten ; Kunst, Claudia ; Müller, Martina:
Novel pathomechanism for spontaneous bacterial peritonitis : disruption of cell junctions by cellular and bacterial proteases.
In: Gut. Vol. 71 (2021) Issue 3 . - pp. 580-592.
DOI: https://doi.org/10.1136/gutjnl-2020-321663

Rudolph, Julia ; Völkl, Matthias ; Jérôme, Valérie ; Scheibel, Thomas ; Freitag, Ruth:
Noxic effects of polystyrene microparticles on murine macrophages and epithelial cells.
In: Scientific Reports. Vol. 11 (2021) . - 15702.
DOI: https://doi.org/10.1038/s41598-021-95073-9

Folger, Gaby ; Chudej, Kurt:
Numerical simulation of a four serotype dengue fever model.
2021
Event: ECMI 2021 Conference , 13.-15.4.2021 , Wuppertal - Online.
(Conference item: Conference , Speech )

Manzoni, Anna M. ; Dubois, Felix ; Mousa, Marwan S. ; von Schlippenbach, Christoph ; Többens, Daniel M. ; Yesilcicek, Yasemin ; Zaiser, Erika ; Hesse, René ; Haas, Sebastian ; Glatzel, Uwe:
On the Formation of Eutectics in Variations of the Al₁₀Co₂₅Cr₈Fe₁₅Ni₃₆Ti₆ Compositionally Complex Alloy.
In: Metallurgical and Materials Transactions A. Vol. 52 (2021) Issue 1 . - pp. 143-150.
DOI: https://doi.org/10.1007/s11661-020-06091-7

Schweizer, Anne-Maria ; Leiderer, Anna ; Mitterwallner, Veronika ; Walentowitz, Anna J. ; Mathes, Gregor H. ; Steinbauer, Manuel:
Outdoor cycling activity affected by COVID-19 related epidemic-control-decisions.
In: PLoS One. Vol. 16 (2021) Issue 5 . - e0249268.
DOI: https://doi.org/10.1371/journal.pone.0249268

Mengis, Lukas ; Ulrich, Anke Silvia ; Watermeyer, Philipp ; Liebscher, Christian ; Galetz, Mathias C.:
Oxidation behaviour and related microstructural changes of two β₀–phase containing TiAl alloys between 600 °C and 900 °C.
In: Corrosion Science. Vol. 178 (2021) . - 109085.
DOI: https://doi.org/10.1016/j.corsci.2020.109085

Humenik, Martin ; Winkler, Anika ; Scheibel, Thomas:
Patterning of protein‐based materials.
In: Biopolymers. Vol. 112 (2021) Issue 2 . - e23412.
DOI: https://doi.org/10.1002/bip.23412

Strassburg, Stephen ; Zainuddin, Shakir ; Scheibel, Thomas:
The Power of Silk Technology for Energy Applications.
In: Advanced Energy Materials. Vol. 11 (2021) Issue 43 . - 2100519.
DOI: https://doi.org/10.1002/aenm.202100519

Han, Feng ; Riegraf, Matthias ; Sata, Noriko ; Bombarda, Ilaria ; Liensdorf, Tom ; Sitzmann, Carolin ; Langhof, Nico ; Schafföner, Stefan ; Walter, Christian ; Geipel, Christian ; Costa, Rémi:
Properties and Performance of Electrolyte Supported SOFCs with EB-PVD Gd-Doped Ceria Thin-Films.
In: ECS Transactions. Vol. 103 (2021) Issue 1 . - pp. 139-147.
DOI: https://doi.org/10.1149/10301.0139ecst

Glatzel, Uwe ; Schleifer, Felix ; Gadelmeier, Christian ; Krieg, Fabian ; Müller, Moritz ; Mosbacher, Mike ; Völkl, Rainer:
Quantification of Solid Solution Strengthening and Internal Stresses through Creep Testing of Ni-Containing Single Crystals at 980°C.
In: Metals. Vol. 11 (2021) Issue 7 . - 1130.
DOI: https://doi.org/10.3390/met11071130

Lin, Yueh-Yu ; Schleifer, Felix ; Holzinger, Markus ; Ta, Na ; Skrotzki, Birgit ; Kamachali, Reza Darvishi ; Glatzel, Uwe ; Fleck, Michael:
Quantitative Shape-Classification of Misfitting Precipitates during Cubic to Tetragonal Transformations : Phase-Field Simulations and Experiments.
In: Materials. Vol. 14 (2021) Issue 6 . - 1373.
DOI: https://doi.org/10.3390/ma14061373

Neubauer, Vanessa J. ; Kellner, Christine ; Grün, Viktoria ; Schenk, Anna ; Scheibel, Thomas:
Recombinant major ampullate spidroin-particles as biotemplates for manganese carbonate mineralization.
In: Multifunctional Materials. Vol. 4 (2021) Issue 1 . - 014002.
DOI: https://doi.org/10.1088/2399-7532/abddc4

Neubauer, Vanessa J. ; Döbl, Annika ; Scheibel, Thomas:
Silk-Based Materials for Hard Tissue Engineering.
In: Materials. Vol. 14 (2021) Issue 3 . - 674.
DOI: https://doi.org/10.3390/ma14030674

Chudej, Kurt ; Folger, Gaby ; Wessely, Anja ; Fischer, Anne:
Simulation and Optimal Control of Dengue Fever Models.
2021
Event: Joint Workshop of GAMM Activity Groups "Dynamics and Control Theory" and "Optimization with Partial Differential Equations" , 2.-3.10.2021 , Bayreuth.
(Conference item: Workshop , Speech )

Ta, Na ; Umer Bilal, Muhammad ; Häusler, Ines ; Saxena, Alaukik ; Lin, Yueh-Yu ; Schleifer, Felix ; Fleck, Michael ; Glatzel, Uwe ; Skrotzki, Birgit ; Darvishi Kamachali, Reza:
Simulation of the θ’ Precipitation Process with Interfacial Anisotropy Effects in Al-Cu Alloys.
In: Materials. Vol. 14 (2021) Issue 5 . - 1280.
DOI: https://doi.org/10.3390/ma14051280

Bänsch, Eberhard ; Faghih-Naini, Sara:
Simulations With a Thermodynamically Consistent Model for Convective Transport in Nanofluids.
In: Journal of Heat Transfer. Vol. 143 (2021) Issue 12 . - 122501.
DOI: https://doi.org/10.1115/1.4051601

Klemenz, L. ; Richter, A. ; Langhof, Nico ; Göbbels, M.:
Structure and principles of oxidic hexaphases : A review.
In: Open Ceramics. Vol. 7 (2021) . - 100142.
DOI: https://doi.org/10.1016/j.oceram.2021.100142

Balzereit, Sandra:
Strukturen und Eigenschaften selektiv lasergesinterter Polyamid- und Polyamid-Kupfer-Systeme für Anwendungen in dreidimensionalen Schaltungsträgern.
Bayreuth , 2021 . - XIV, 208 p.
( Doctoral thesis, 2020 , Universität Bayreuth, Fakultät für Ingenieurwissenschaften)
DOI: https://doi.org/10.15495/EPub_UBT_00005241

Redka, David ; Gadelmeier, Christian ; Winter, Jan ; Spellauge, Maximilian ; Eulenkamp, Constanze ; Calta, Pavel ; Glatzel, Uwe ; Minár, Ján ; Huber, Heinz P.:
Sub-picosecond single-pulse laser ablation of the CrMnFeCoNi high entropy alloy and comparison to stainless steel AISI 304.
In: Applied Surface Science. Vol. 544 (2021) . - 148839.
DOI: https://doi.org/10.1016/j.apsusc.2020.148839

Bethke, Christian ; Kaysser, Simon T. ; Du Ngoc, Uy Lan ; Goller, Sebastian M. ; van der Zwan, Kasper P. ; Senker, Jürgen ; Ruckdäschel, Holger ; Altstädt, Volker:
Synthesis and Characterization of Dual-Functional Carbamates as Blowing and Curing Agents for Epoxy Foam.
In: Industrial & Engineering Chemistry Research. Vol. 60 (2021) Issue 19 . - pp. 7065-7080.
DOI: https://doi.org/10.1021/acs.iecr.0c05262

Pfizenmaier, Petra ; Ulrich, Anke Silvia ; Galetz, Mathias C. ; Glatzel, Uwe:
Tensile creep properties of Cr-Si Alloys at 980 °C in air : Influence of Ge and Mo addition.
In: Metals. Vol. 11 (2021) Issue 7 . - 1072.
DOI: https://doi.org/10.3390/met11071072

Röber, Matthias ; Scheibel, Thomas ; Börner, Hans G.:
Toward Activatable Collagen Mimics : Combining DEPSI "Switch" Defects and Template-Guided Self-Organization to Control Collagen Mimetic Peptides.
In: Macromolecular Bioscience. Vol. 21 (2021) Issue 7 . - 2100070.
DOI: https://doi.org/10.1002/mabi.202100070

Wolff-Goodrich, Silas ; Haas, Sebastian ; Glatzel, Uwe ; Liebscher, Christian H.:
Towards superior high temperature properties in low density ferritic AlCrFeNiTi compositionally complex alloys.
In: Acta Materialia. Vol. 216 (2021) . - 117113.
DOI: https://doi.org/10.1016/j.actamat.2021.117113

Peng, Wangding ; Chen, Zhe ; Yan, Wen ; Schafföner, Stefan ; Li, Guangqiang ; Li, Yawei ; Jia, Cangjian:
Advanced lightweight periclase-magnesium aluminate spinel refractories with high mechanical properties and high corrosion resistance.
In: Construction and Building Materials. Vol. 291 (2021) . - 123388.
DOI: https://doi.org/10.1016/j.conbuildmat.2021.123388

Sonnleitner, David ; Sommer, Christoph ; Scheibel, Thomas ; Lang, Gregor:
Approaches to inhibit biofilm formation applying natural and artificial silk-based materials.
In: Materials Science and Engineering: C. Vol. 131 (2021) . - 112458.
DOI: https://doi.org/10.1016/j.msec.2021.112458

Maimon-Mor, Roni O. ; Schone, Hunter R. ; Henderson Slater, David ; Faisal, A. Aldo ; Makin, Tamar R.:
Author response: Early life experience sets hard limits on motor learning as evidenced from artiﬁcial arm use.
In: eLife. Vol. 10 (2021) . - e66320.
DOI: https://doi.org/10.7554/elife.66320.sa2

Bludau, Johann:
Backward Bifurcation in einfachen mathematischen Krankheitsmodellen.
Bayreuth , 2021
( Bachelor thesis, 2021 , Universität Bayreuth, Fakultät für Mathematik, Physik und Informatik, Lehrstuhl für Wissenschaftliches Rechnen)

Poon, Kara K. ; Schafföner, Stefan ; Einarsrud, Mari-Ann ; Glaum, Julia:
Barium titanate-based bilayer functional coatings on Ti alloy biomedical implants.
In: Journal of the European Ceramic Society. Vol. 41 (2021) Issue 4 . - pp. 2918-2922.
DOI: https://doi.org/10.1016/j.jeurceramsoc.2020.12.023

Faisal, A. Aldo ; Le Lannou, Erwann ; Post, Benjamin ; Haar, Shlomi ; Brett, Stephen ; Kadirvelu, Balasundaram:
Clustering of patient comorbidities within electronic medical records enables high-precision COVID-19 mortality prediction.
Research Square , 2021
DOI: https://doi.org/10.21203/rs.3.rs-374482/v1

Le Lannou, Erwann ; Post, Benjamin ; Haar, Shlomi ; Brett, Stephen J. ; Kadirvelu, Balasundaram ; Faisal, A. Aldo:
Clustering of patient comorbidities within electronic medical records enables high-precision COVID-19 mortality prediction.
medRxiv , 2021
DOI: https://doi.org/10.1101/2021.03.29.21254579

Kadirvelu, Balasundaram ; Burcea, Gabriel ; Quint, Jennifer K. ; Costelloe, Ceire E. ; Faisal, A. Aldo:
Covid-19 does not look like what you are looking for : Clustering symptoms by nation and multi-morbidities reveal substantial differences to the classical symptom triad.
medRxiv , 2021
DOI: https://doi.org/10.1101/2021.04.02.21254818

Faisal, A. Aldo ; Kadirvelu, Balasundaram ; Gavriel, Constantinos ; Nageshwaran, Sathiji ; Chan, Jackson Ping Kei Jackson ; Athanasopoulos, Stavros ; Giunti, Paola ; Ricotti, Valeria ; Voit, Thomas ; Festenstein, Richard:
Data-derived wearable digital biomarkers predict Frataxin gene expression levels and longitudinal disease progression in Friedreich’s Ataxia.
Research Square , 2021
DOI: https://doi.org/10.21203/rs.3.rs-737100/v1

Ortega, Pablo ; Faisal, A. Aldo:
Deep learning multimodal fNIRS and EEG signals for bimanual grip force decoding.
In: Journal of Neural Engineering. Vol. 18 (2021) Issue 4 . - 0460e6.
DOI: https://doi.org/10.1088/1741-2552/ac1ab3

Ortega, Pablo ; Zhao, Tong ; Faisal, A. Aldo:
Deep Real-Time Decoding of bimanual grip force from EEG & fNIRS.
In: 10th International IEEE/EMBS Conference on Neural Engineering (NER) : Proceedings. - Piscataway, NJ : IEEE, 2021 . - pp. 714-717
DOI: https://doi.org/10.1109/NER49283.2021.9441409

Zhou, Wenying ; Yan, Wen ; Ma, Sanbao ; Schafföner, Stefan ; Dai, Yajie ; Li, Yawei:
Degradation mechanisms of periclase-magnesium aluminate spinel refractory bricks used in the upper transition zone of a cement rotary kiln.
In: Construction and Building Materials. Vol. 272 (2021) . - 121617.
DOI: https://doi.org/10.1016/j.conbuildmat.2020.121617

Parkin, Beth L. ; Daws, Richard E. ; Das-Neves, Ines ; Violante, Ines R. ; Soreq, Eyal ; Faisal, A. Aldo ; Sandrone, Stefano ; Lao-Kaim, Nicholas P. ; Martin-Bastida, Antonio ; Roussakis, Andreas-Antonios ; Piccini, Paola ; Hampshire, Adam:
Dissociable effects of age and Parkinson’s disease on instruction-based learning.
In: Brain Communications. Vol. 3 (2021) Issue 3 .
DOI: https://doi.org/10.1093/braincomms/fcab175

Maimon-Mor, Roni O. ; Schone, Hunter R. ; Henderson Slater, David ; Faisal, A. Aldo ; Makin, Tamar R.:
Early life experience sets hard limits on motor learning as evidenced from artificial arm use.
In: eLife. Vol. 10 (2021) . - e66320.
DOI: https://doi.org/10.7554/eLife.66320

Maimon-Mor, Roni O. ; Schone, Hunter R. ; Slater, David Henderson ; Faisal, A. Aldo ; Makin, Tamar R.:
Early life experience sets hard limits on motor learning as evidenced from artificial arm use.
bioRxiv , 2021
DOI: https://doi.org/10.1101/2021.01.26.428281

Yan, Junjie ; Yan, Wen ; Schafföner, Stefan ; Dai, Yajie ; Chen, Zhe ; Wang, Qiang ; Li, Guangqiang ; Jia, Cangjian:
Effect of microporous magnesia aggregates on microstructure and properties of periclase-magnesium aluminate spinel castables.
In: Ceramics International. Vol. 47 (2021) Issue 5 . - pp. 6540-6547.
DOI: https://doi.org/10.1016/j.ceramint.2020.10.240

Haar, Shlomi ; Sundar, Guhan ; Faisal, A. Aldo:
Embodied virtual reality for the study of real-world motor learning.
In: PLoS One. Vol. 16 (2021) Issue 1 . - e0245717.
DOI: https://doi.org/10.1371/journal.pone.0245717

Festor, Paul ; Luise, Giulia ; Komorowski, Matthieu ; Faisal, A. Aldo:
Enabling risk-aware Reinforcement Learning for medical interventions through uncertainty decomposition.
2021
Event: 1st Workshop on Interpretable Machine Learning in Healthcare (IMLH) at International Conference on Machine Learning (ICML) , Virtual.
(Conference item: Workshop , Paper )
DOI: https://doi.org/10.48550/arXiv.2109.07827

Steiner, Dominik ; Winkler, Sophie ; Heltmann-Meyer, Stefanie ; Trossmann, Vanessa T. ; Fey, Tobias ; Scheibel, Thomas ; Horch, Raymund E. ; Arkudas, Andreas:
Enhanced vascularization and de novo tissue formation in hydrogels made of engineered RGD-tagged spider silk proteins in the arteriovenous loop model.
In: Biofabrication. Vol. 13 (2021) Issue 4 . - 045003.
DOI: https://doi.org/10.1088/1758-5090/ac0d9b

Odonkor, Charles A. ; Taraben, Salam ; Tomkins-Lane, Christy ; Zhang, Wei ; Muaremi, Amir ; Leutheuser, Heike ; Sun, Ruopeng ; Smuck, Matthew:
Examining the association between self-reported estimates of function and objective measures of gait and physical capacity in lumbar stenosis.
In: Archives of Rehabilitation Research and Clinical Translation. Vol. 3 (2021) Issue 3 . - 100147.
DOI: https://doi.org/10.1016/j.arrct.2021.100147

Weithmann, Nicolas ; Mlinar, Stanislava ; Sonnleitner, Eva ; Weig, Alfons ; Freitag, Ruth:
Flexible feeding in anaerobic digestion : Impact on process stability, performance and microbial community structures.
In: Anaerobe. Vol. 68 (2021) . - 102297.
DOI: https://doi.org/10.1016/j.anaerobe.2020.102297

Fünfter Gentechnologiebericht : Sachstand und Perspektiven für Forschung und Anwendung.
ed.: Fehse, Boris ; Hucho, Ferdinand ; Bartfeld, Sina ; Clemens, Stephan ; Erb, Tobias ; Fangerau, Heiner ; Hampel, Jürgen ; Korte, Martin ; Marx-Stölting, Lilian ; Mundlos, Stefan ; Osterheider, Angela ; Pichl, Anja ; Reich, Jens ; Schickl, Hannah ; Schicktanz, Silke ; Taupitz, Jochen ; Walter, Jörn ; Winkler, Eva ; Zenke, Martin
Baden-Baden : Nomos , 2021

DOI: https://doi.org/10.5771/9783748927242

Subramanian, Mahendran ; Park, Suhyung ; Orlov, Pavel ; Shafti, Ali ; Faisal, A. Aldo:
Gaze-contingent decoding of human navigation intention on an autonomous wheelchair platform.
In: 10th International IEEE/EMBS Conference on Neural Engineering (NER) : Proceedings. - Piscataway, NJ : IEEE, 2021 . - pp. 335-338
DOI: https://doi.org/10.1109/NER49283.2021.9441218

Bartfeld, Sina ; Clemens, Stephan ; Erb, Tobias J. ; Fangerau, Heiner ; Fehse, Boris ; Hampel, Jürgen ; Hucho, Ferdinand ; Korte, Martin ; Mundlos, Stefan ; Reich, Jens ; Schicktanz, Silke ; Taupitz, Jochen ; Walter, Jörn ; Winkler, Eva C. ; Zenke, Martin:
Handlungsempfehlungen zu den Themenfeldern der IAG Gentechnologiebericht.
In: Fünfter Gentechnologiebericht : Sachstand und Perspektiven für Forschung und Anwendung. - Baden-Baden : Nomos, 2021 . - pp. 47-80
DOI: https://doi.org/10.5771/9783748927242-47

Ortega, Pablo ; Faisal, A. Aldo:
HemCNN : Deep Learning enables decoding of fNIRS cortical signals in hand grip motor tasks.
In: 10th International IEEE/EMBS Conference on Neural Engineering (NER) : Proceedings. - Piscataway, NJ : IEEE, 2021 . - pp. 718-721
DOI: https://doi.org/10.1109/NER49283.2021.9441323

Wannawas, Nat ; Shafti, Ali ; Faisal, A. Aldo:
I am Robot : Neuromuscular Reinforcement Learning to Actuate Human Limbs through Functional Electrical Stimulation.
No information : arXiv, 2021

Laomeephal, Chavee ; Apichai, Vasuratna ; Ratanavaraporn, Juthamas ; Kanokpanont, Sorada ; Luckanagul, Jittima Amie ; Humenik, Martin ; Scheibel, Thomas ; Damrongsakkul, Siriporn:
Impacts of Blended Bombyx mori Silk Fibroin and Recombinant Spider Silk Fibroin Hydrogels on Cell Growth.
In: Polymers. Vol. 13 (2021) Issue 23 . - 4182.
DOI: https://doi.org/10.3390/polym13234182

Wei, Xiaoxi ; Ortega, Pablo ; Faisal, A. Aldo:
Inter-subject Deep Transfer Learning for Motor Imagery EEG Decoding.
In: 10th International IEEE/EMBS Conference on Neural Engineering (NER) : Proceedings. - Piscataway, NJ : IEEE, 2021 . - pp. 21-24
DOI: https://doi.org/10.1109/NER49283.2021.9441085

Festor, Paul ; Habli, Ibrahim ; Jia, Yan ; Gordon, Anthony ; Faisal, A. Aldo ; Komorowski, Matthieu:
Levels of Autonomy and Safety Assurance for AI-Based Clinical Decision Systems.
In: Habli, Ibrahim ; Sujan, Mark ; Gerasimou, Simos ; Schoitsch, Erwin ; Bitsch, Friedemann (ed.): Computer Safety, Reliability, and Security : SAFECOMP 2021 Workshops ; Proceedings. - Cham : Springer, 2021 . - pp. 291-296 . - (Lecture Notes in Computer Science ; 12853 )
DOI: https://doi.org/10.1007/978-3-030-83906-2_24

Schmidt, Hannes:
Mathematische Analyse eines Modells einer mückenübertragenen Krankheit.
Bayreuth , 2021
( Bachelor thesis, 2021 , Universität Bayreuth, Fakultät für Mathematik, Physik und Informatik, Lehrstuhl für Wissenschaftliches Rechnen)

Stout, Dietrich ; Chaminade, Thierry ; Apel, Jan ; Shafti, Ali ; Faisal, A. Aldo:
The measurement, evolution, and neural representation of action grammars of human behavior.
In: Scientific Reports. Vol. 11 (2021) Issue 1 . - 13720.
DOI: https://doi.org/10.1038/s41598-021-92992-5

Chen, Zhe ; Yan, Wen ; Schafföner, Stefan ; Li, Yawei ; Li, Nan:
Microstructure and mechanical properties of lightweight Al₂O₃-C refractories using different carbon sources.
In: Journal of Alloys and Compounds. Vol. 862 (2021) . - 158036.
DOI: https://doi.org/10.1016/j.jallcom.2020.158036

Li, Denghao ; Ortega, Pablo ; Wei, Xiaoxi ; Faisal, A. Aldo:
Model-Agnostic Meta-Learning for EEG Motor Imagery Decoding in Brain-Computer-Interfacing.
In: 10th International IEEE/EMBS Conference on Neural Engineering (NER) : Proceedings. - Piscataway, NJ : IEEE, 2021 . - pp. 527-530
DOI: https://doi.org/10.1109/NER49283.2021.9441077

Patel, Brijesh V. ; Haar, Shlomi ; Handslip, Rhodri ; Auepanwiriyakul, Chaiyawan ; Lee, Teresa Mei-Ling ; Patel, Sunil ; Harston, J. Alex ; Hosking-Jervis, Feargus ; Kelly, Donna ; Sanderson, Barnaby ; Borgatta, Barbara ; Tatham, Kate ; Welters, Ingeborg ; Camporota, Luigi ; Gordon, Anthony C. ; Komorowski, Matthieu ; Antcliffe, David ; Prowle, John R. ; Puthucheary, Zudin ; Faisal, A. Aldo:
Natural history, trajectory, and management of mechanically ventilated COVID-19 patients in the United Kingdom.
In: Intensive Care Medicine. Vol. 47 (2021) Issue 5 . - pp. 549-565.
DOI: https://doi.org/10.1007/s00134-021-06389-z

Wannawas, Nat ; Subramanian, Mahendran ; Faisal, A. Aldo:
Neuromechanics-based Deep Reinforcement Learning of Neurostimulation Control in FES cycling.
In: 10th International IEEE/EMBS Conference on Neural Engineering (NER) : Proceedings. - Piscataway, NJ : IEEE, 2021 . - pp. 381-384
DOI: https://doi.org/10.1109/NER49283.2021.9441354

Shafti, Ali ; Faisal, A. Aldo:
Non-invasive Cognitive-level Human Interfacing for the Robotic Restoration of Reaching & Grasping.
In: 10th International IEEE/EMBS Conference on Neural Engineering (NER) : Proceedings. - Piscataway, NJ : IEEE, 2021 . - pp. 872-875
DOI: https://doi.org/10.1109/NER49283.2021.9441453

Pieritz, Svenja ; Khwaja, Mohammed ; Faisal, A. Aldo ; Matic, Aleksandar:
Personalised recommendations in mental health Apps : the impact of autonomy and data sharing.
In: Proceedings of the 2021 CHI Conference on Human Factors in Computing Systems. - New York : Association for Computing Machinery, 2021 . - 537
DOI: https://doi.org/10.1145/3411764.3445523

Khwaja, Mohammed ; Pieritz, Svenja ; Faisal, A. Aldo ; Matic, Aleksandar:
Personality and Engagement with Digital Mental Health Interventions.
In: Masthoff, Judith ; Herder, Eelco ; Tintarev, Nava ; Tkalčič, Marko (ed.): Proceedings of the 29th ACM Conference on User Modeling, Adaptation and Personalization. - New York : Association for Computing Machinery, 2021 . - pp. 235-239
DOI: https://doi.org/10.1145/3450613.3456823

Andreykiv, Oleksandr ; Hembara, Oksana ; Dolinska, Iryna ; Sapuzhak, Yaroslav ; Yadzhak, Nataliya:
Prediction of Residual Service Life of Oil Pipeline Under Non-stationary Oil Flow Taking into Account Steel Degradation.
In: Bolzon, Gabriella ; Gabetta, Giovanna ; Nykyforchyn, Hryhoriy (ed.): Degradation Assessment and Failure Prevention of Pipeline Systems. - Cham : Springer, 2021 . - pp. 203-216 . - (Lecture Notes in Civil Engineering ; 102 )
DOI: https://doi.org/10.1007/978-3-030-58073-5_16

Faisal, A. Aldo:
Putting touch into action.
In: Science. Vol. 372 (2021) Issue 6544 . - pp. 791-792.
DOI: https://doi.org/10.1126/science.abi7262

Wu, Yufei ; Haar, Shlomi ; Faisal, A. Aldo:
Reproducing Human Motor Adaptation in Spiking Neural Simulation and known Synaptic Learning Rules.
bioRxiv , 2021
DOI: https://doi.org/10.1101/2021.06.24.449760

Uwanyuze, R. Sharon ; Kanyo, Janos E. ; Myrick, Sarah F. ; Schafföner, Stefan:
A review on alpha case formation and modeling of mass transfer during investment casting of titanium alloys.
In: Journal of Alloys and Compounds. Vol. 865 (2021) . - 158558.
DOI: https://doi.org/10.1016/j.jallcom.2020.158558

2020

Hofer, Michael ; Glenk, Christian ; Theling, Julian:
Dachprojekt Themenkomplex Planetenradverformung : Entwicklung von Berechnungsmethoden zur Berücksichtigung der Planetenradverformung.
2020
Event: FVA-Informationstagung 2020 : das Online-Netzwerktreffen , 30.11. - 4.12.2020 , Online.
(Conference item: Conference , Speech )

Apsite, Indra:
Biofabrication using fibrous shape-morphing materials.
Bayreuth , 2020 . - 137 p.
( Doctoral thesis, 2020 , Universität Bayreuth, Bayreuther Graduiertenschule für Mathematik und Naturwissenschaften - BayNAT)
DOI: https://doi.org/10.15495/EPub_UBT_00005244

Faghih-Naini, Sara ; Kuckuk, Sebastian ; Zint, Daniel ; Aizinger, Vadym ; Köstler, Harald ; Grosso, Roberto:
A Quadrature-free p-adaptive Discontinuous Galerkin Formulation for Shallow-water Equations with Code Generation Features.
2020
Event: Modeling and Simulation of Transport Phenomena , 12.-15. Okt. 2020 , Treis-Karden, Deutschland.
(Conference item: Conference , Speech )

Faghih-Naini, Sara ; Aizinger, Vadym ; Kuckuk, Sebastian ; Zint, Daniel ; Köstler, Harald ; Grosso, Roberto:
Quadrature-free Discontinuous Galerkin Formulation for Shallow-water Equations with Code Generation Features.
2020
Event: ECMWF Annual Seminar 2020 , 14.-18. Sept. 2020 , Online-Conference.
(Conference item: Workshop , Poster )

Kühlmann, Torsten M. ; Becker, Julia ; Eimecke, Jörgen ; Derra, Nicholas Daniel ; Wagner, Johanna ; Rath, Simon ; Hofmann, Anni ; Schweizer, Elisabeth:
BF/M-Spiegel: Journal des Betriebswirtschaftlichen Forschungszentrums für Fragen der mittelständischen Wirtschaft e. V. an der Universität Bayreuth,Juli 2020, Ausgabe 1.
BF/M-Spiegel. (2020) Issue 1 . - 39 p.
DOI: https://doi.org/10.15495/EPub_UBT_00005089

Lehmann, Alexandra:
Structure of the EHR Vendor Market and its Innovation Power.
In: Schmid, Andreas ; Fried, Bruce ; Verlag P.C.O. (ed.): Crossing Borders - Digital Transformation and the U.S. Health Care System. - Bayreuth : P.C.O., 2020 . - pp. 55-71 . - (Schriften zur Gesundheitsökonomie ; 85 )
DOI: https://doi.org/10.15495/EPub_UBT_00004920

Purnhagen, Kai ; Wesseler, Justus:
The SAMs Report “Towards a Sustainable Food System” bites the hand that feeds us!
In: European Law Blog.
8 June 2020

Bay, Christian:
Interdisciplinary View of Additive Innovations for a resilient value-added chain.
2020
Event: Digital Industry Days Conference: Additive Manufacturing , 27.05.2020 .
(Conference item: Conference , Speech )

Bay, Christian ; Döpper, Frank:
Innovativ aus der Krise : Interdisziplinäres Zentrum für 3D-Druck.
In: K-Zeitung : Die Zeitung der Kunststoff- und Kautschukundustrie. (22 May 2020) Issue 10 .

Ouma, Stefan ; Beisel, Uli ; Glasman, Joël:
Genesene Menschen als Ressource?
In: Frankfurter Rundschau. (1 May 2020) .

Rosemann, Bernd:
Schnittstellen – Vermeiden? Optimieren. Beherrschen! : Freiraum für Innovation.
2020
Event: Wernesgrüner Werkzeugsymposium 2020: Schnittstellen – Wust, Frust, Lust , 29.–31. Januar 2020 , Wernesgrün.
(Conference item: Conference , Speech )

Herath, Mark ; Chudej, Kurt:
Analyse, Simulation und optimale Steuerung eines Dengue-Fieber-Modells mit temporärer Kreuzimmunität.
In: Deatcu, Christina ; Lückerath, Daniel ; Ullrich, Oliver ; Durak, Umut (ed.): Proceedings ASIM SST 2020 : 25. ASIM Symposium Simulationstechnik. - Wien : ARGESIM, 2020 . - pp. 63-71 . - (ARGESIM Report ; 59 )
DOI: https://doi.org/10.11128/arep.59.a59010

DeSimone, Elise ; Aigner, Tamara B. ; Humenik, Martin ; Lang, Gregor ; Scheibel, Thomas:
Aqueous electrospinning of recombinant spider silk proteins.
In: Materials Science and Engineering: C. Vol. 106 (2020) . - 110145.
DOI: https://doi.org/10.1016/j.msec.2019.110145

Herath, Mark ; Albrecht, Gaby ; Chudej, Kurt:
Ein asymmetrisches zwei Serotyp Dengue Fieber Modell mit Kontrollmaßnahmen.
In: Wittmann, Jochen (ed.): Simulation in Umwelt- und Geowissenschaften. - Düren : Shaker Verlag, 2020 . - pp. 191-202 . - (Berichte aus der Umweltinformatik )

Bay, Christian ; Döpper, Frank:
Auf dem Weg zur industriellen Reife : Von der Idee über die Kleinserie bis zur AM-Serienfertigung.
In: Maschinenbau : Das Schweizer Industrie-Magazin. Vol. 49 (2020) Issue 7 .

Riese, Cornelius N. ; Uebe, René ; Rosenfeldt, Sabine ; Schenk, Anna ; Jérôme, Valérie ; Freitag, Ruth ; Schüler, Dirk:
An automated oxystat fermentation regime for microoxic cultivation of Magnetospirillum gryphiswaldense.
In: Microbial Cell Factories. Vol. 19 (2020) . - 206.
DOI: https://doi.org/10.1186/s12934-020-01469-z

Rosemann, Bernd ; Schleicher, Andreas:
Automatisierung der Oberflächenfeinbearbeitung auf CNC-Bearbeitungszentren – Strategieableitung zur Verringerung manueller Nacharbeit.
In: Hoffmeister, Hans-Werner ; Dekena, Berend (ed.): Jahrbuch Schleifen, Honen, Läppen und Polieren : Verfahren und Maschinen. - Essen : Vulkan Verlag GmbH, 2020 . - pp. 256-269 . - (Jahrbuch Schleifen, Honen, Läppen und Polieren ; 69 )

Mickoleit, Frank ; Jérôme, Valérie ; Freitag, Ruth ; Schüler, Dirk:
Bacterial Magnetosomes as Novel Platform for the Presentation of Immunostimulatory, Membrane-Bound Ligands in Cellular Biotechnology.
In: Advanced Biosystems. Vol. 4 (2020) Issue 3 . - 1900231.
DOI: https://doi.org/10.1002/adbi.201900231

Müller, Fabian ; Jokisch, Stephan ; Bargel, Hendrik ; Scheibel, Thomas:
Centrifugal Electrospinning Enables the Production of Meshes ofUltrathin Polymer Fibers.
In: ACS Applied Polymer Materials. Vol. 2 (2020) Issue 11 . - pp. 4360-4667.
DOI: https://doi.org/10.1021/acsapm.0c00853

Bänsch, Eberhard ; Faghih-Naini, Sara ; Morin, Pedro:
Convective transport in nanofluids : The stationary problem.
In: Journal of Mathematical Analysis and Applications. Vol. 489 (2020) Issue 1 . - 124151.
DOI: https://doi.org/10.1016/j.jmaa.2020.124151

Mora-García, Alma G. ; Mosbacher, Mike ; Hastreiter, Julia ; Völkl, Rainer ; Glatzel, Uwe ; Muñoz-Saldaña, Juan:
Creep behavior of polycrystalline and single crystal Ni-based superalloys coated with Ta-containing NiCoCrAlY by high-velocity oxy-fuel spraying.
In: Scripta Materialia. Vol. 178 (2020) . - pp. 522-526.
DOI: https://doi.org/10.1016/j.scriptamat.2019.12.023

Kumari, Sushma ; Lang, Gregor ; DeSimone, Elise ; Spengler, Christian ; Trossmann, Vanessa T. ; Lücker, Susanne ; Hudel, Martina ; Jacobs, Karin ; Krämer, Norbert ; Scheibel, Thomas:
Data for microbe resistant engineered recombinant spider silk protein based 2D and 3D materials.
In: Data in Brief. Vol. 32 (2020) . - 106305.
DOI: https://doi.org/10.1016/j.dib.2020.106305

Herold, Heike M. ; Döbl, Annika ; Wohlrab, Stefanie ; Humenik, Martin ; Scheibel, Thomas:
Designed Spider Silk-Based Drug Carrier for Redox- or pH-Triggered Drug Release.
In: Biomacromolecules. Vol. 21 (2020) Issue 12 . - pp. 4904-4912.
DOI: https://doi.org/10.1021/acs.biomac.0c01138

Pfizenmaier, Petra ; Ulrich, Anke Silvia ; Galetz, Mathias C. ; Glatzel, Uwe:
Determination of heat treatment parameters by experiments and CALPHAD for precipitate hardening of Cr-Alloys with Si, Ge and Mo.
In: Intermetallics. Vol. 116 (2020) . - 106636.
DOI: https://doi.org/10.1016/j.intermet.2019.106636

Kumari, Sushma ; Lang, Gregor ; DeSimone, Elise ; Spengler, Christian ; Trossmann, Vanessa T. ; Lücker, Susanne ; Hudel, Martina ; Jacobs, Karin ; Krämer, Norbert ; Scheibel, Thomas:
Engineered spider silk-based 2D and 3D materials prevent microbial infestation.
In: Materials Today. Vol. 41 (2020) . - pp. 21-33.
DOI: https://doi.org/10.1016/j.mattod.2020.06.009

Huang, Tao ; Kumari, Sushma ; Herold, Heike ; Bargel, Hendrik ; Aigner, Tamara B. ; Heath, Daniel E. ; O'Brian-Simpson, Neil M. ; O'Connor, Andrea J. ; Scheibel, Thomas:
Enhanced Antibacterial Activity of Se Nanoparticles Upon Coating with Recombinant Spider Silk Protein eADF4(κ16).
In: International Journal of Nanomedicine. Vol. 15 (2020) . - pp. 4275-4288.
DOI: https://doi.org/10.2147/IJN.S255833

Flothow, Amelie ; Chudej, Kurt:
Entwicklung und Analyse einer stufigen SVIR-Baummodellierung.
In: Deatcu, Christina ; Lückerath, Daniel ; Ullrich, Oliver ; Durak, Umut (ed.): Proceedings ASIM SST 2020 : 25. ASIM Symposium Simulationstechnik. - Wien : ARGESIM, 2020 . - pp. 73-81 . - (ARGESIM Report ; 59 )
DOI: https://doi.org/10.11128/arep.59.a59011

Ulrich, Anke Silvia:
Entwicklung von Ausscheidungshärtbaren Cr-Si-Basis-Legierungen für Hochtemperaturanwendungen : Mikrostruktur und Oxidation.
Düren : Shaker , 2020 . - xii, 116 p. - (Schriftenreihe des DECHEMA-Forschungsinstituts ; 20 )
( Doctoral thesis, 2020 , Universität Bayreuth, Fakultät für Ingenieurwissenschaften)

Dörr, Dominik ; Raps, Daniel ; Kirupanantham, Dharan ; Holmes, Chris ; Altstädt, Volker:
Expanded polyamide 12 bead foams (ePA) thermo-mechanical properties of molded parts.
In: Cebeci, Fevci Cakmak ; Menceloglu, Yusuf Z. ; Unal, Serkan ; Ulcer, Yakup (ed.): Proceedings of the 35th International Conference of the Polymer Processing Society (PPS-35). - Melville, NY : AIP Publications, 2020 . - No. 020037 . - (AIP Conference Proceedings ; 2205 )
DOI: https://doi.org/10.1063/1.5142952

Lengsfeld, Hauke ; Lacalle, Javier ; Neumeyer, Thomas ; Altstädt, Volker:
Faserverbundwerkstoffe : Prepregs und ihre Verarbeitung. 2., aktualisierte und erweiterte Auflage.
München : Hanser , 2020 . - XIX, 266 p.

DOI: https://doi.org/10.3139/9783446466036

Haynl, Christian ; Vongsvivut, Jitraporn ; Mayer, Kai R. H. ; Bargel, Hendrik ; Neubauer, Vanessa J. ; Tobin, Mark J. ; Elgar, Mark A. ; Scheibel, Thomas:
Free‑standing spider silk webs of the thomisid Saccodomus formivorus are made of composites comprising micro- and submicron fibers.
In: Scientific Reports. Vol. 10 (2020) . - 17624.
DOI: https://doi.org/10.1038/s41598-020-74469-z

Schulze, Alexander:
Gesundheitssicherung im Kontext sozialer Differenzierung : Wer tritt Krankenkassen im ländlichen Mali bei?
ed.: Kroeker, Lena
Bayreuth , 2020 . - VIII, 327 p. - (University of Bayreuth African Studies Online ; 8 )

DOI: https://doi.org/10.15495/EPub_UBT_00005143

Zaiser, Erika ; Zhou, X. Y. ; Manzoni, Anna M. ; Haas, Sebastian ; Glatzel, Uwe ; Zhang, X. P. ; Thompson, G. B. ; Li, W. ; Vogel, F.:
Hierarchical phase separation behavior in a Ni-Si-Fe alloy.
In: Acta Materialia. Vol. 195 (2020) . - pp. 327-340.
DOI: https://doi.org/10.1016/j.actamat.2020.05.023

Ulrich, Anke Silvia ; Pfizenmaier, Petra ; Solimani, Ali ; Glatzel, Uwe ; Galetz, Mathias:
Improving the oxidation resistance of Cr-Si-based alloys by ternary alloying.
In: Corrosion Science. Vol. 165 (2020) . - 108376.
DOI: https://doi.org/10.1016/j.corsci.2019.108376

Schmid, S. ; Scherm, S. ; Haderer, Marika ; Gülow, K. ; Müller-Schilling, M.:
Infektionen bei Leberzirrhose – von bakterieller Translokation über spontan-bakterielle Peritonitis und Pneumonie zum akut-auf-chronischen Leberversagen.
In: Der Gastroenterologe. Vol. 15 (2020) Issue 3 . - pp. 201-210.
DOI: https://doi.org/10.1007/s11377-020-00439-6

Hofmann, Karoline ; Brütting, Christian ; Gehde, Michael ; Altstädt, Volker:
Interaction Between Foam Injection Molding and Welding Process.
In: Hopmann, Christian ; Dahlmann, Rainer (ed.): Advances in Polymer Processing 2020. - Berlin : Springer Vieweg, 2020 . - pp. 233-246
DOI: https://doi.org/10.1007/978-3-662-60809-8_19

Rosemann, Bernd:
Klimagas CO2 als wertvoller Rohstoff.
In: Werkstoffe in der Fertigung. (2020) Issue 2 . - pp. 14-16.

Herath, Mark:
Mathematische Modellierung und Numerische Simulation invasiver Krankheiten.
Bayreuth , 2020
(Master's, 2020 , Universität Bayreuth, Fakultät für Mathematik, Physik und Informatik, Lehrstuhl für Wissenschaftliches Rechnen)

Sitzmann, Carolin ; Liensdorf, Tom ; Dömling, Ferdinand ; Langhof, Nico ; Krenkel, Walter:
Mechanische Charakterisierung von Festoxid-Brennstoffzellen.
In: Keramische Zeitschrift. Vol. 72 (2020) Issue 2 . - pp. 48-53.
DOI: https://doi.org/10.1007/s42410-020-0122-3

Bay, Christian:
Mehr Interdisziplinarität wagen.
x-technik IT & Medien GmbH
In: Additive Fertigung. (2020) Issue 3 . - pp. 68-69.

Göttermann, Svenja ; Altstädt, Volker ; Standau, Tobias ; Bonten, Christian:
Modified polylactide with improved thermal and rheological properties for foaming.
In: Society of Plastics Engineers (ed.): ANTEC 2017 : Proceedings of the Technical Conference & Exhibition, Anaheim, California, USA May 8-10, 2017. - Newtown, Conn. : Society of Plastics Engineers, 2020 . - pp. 452-456

Krenkel, Walter ; Opel, Thorsten ; Langhof, Nico:
Novel Ceramic/Metal Brake Discs.
2020
Event: 44th International Conference Advanced Ceramics and Composites ICACC 2020 , 26-31.1.2020 , Daytona Beach, Florida, USA.
(Conference item: Conference , Speech )

Hopfe, Charlotte ; Ospina-Jara, Bryan ; Scheibel, Thomas ; Cabra-Garcia, Jimmy:
Ocrepeira klamt sp. n. (Araneae: Araneidae), a novel spider species from an Andean páramo in Colombia.
In: PLoS One. Vol. 15 (2020) Issue 8 . - e0237499.
DOI: https://doi.org/10.1371/journal.pone.0237499

Lin, Yueh-Yu ; Schleifer, Felix ; Fleck, Michael ; Glatzel, Uwe:
On the interaction between γ′′ precipitates and dislocation microstructures in Nb containing single crystal nickel-base alloys.
In: Materials Characterization. Vol. 165 (2020) . - 110389.
DOI: https://doi.org/10.1016/j.matchar.2020.110389

Fechner, Pascal ; Chudej, Kurt ; Albrecht, Gaby:
Optimale Impfstrategien für ein mathematisches Chikungunyafieber-Modell.
In: Wittmann, Jochen (ed.): Simulation in Umwelt- und Geowissenschaften. - Düren : Shaker Verlag, 2020 . - pp. 203-213 . - (Berichte aus der Umweltinformatik )

Galetz, Mathias C. ; Ulrich, Anke Silvia ; Oskay, Ceyhun ; Fähsing, Diana ; Laska, Nadine ; Schulz, Uwe ; Schütze, Michael:
Oxidation-induced microstructural changes of the TiAl TNM-B1 alloy after exposure at 900 °C in air.
In: Intermetallics. Vol. 123 (2020) . - 106830.
DOI: https://doi.org/10.1016/j.intermet.2020.106830

Mader, Michael ; Helm, Moritz ; Lu, Mingxia ; Stenzel, Martina H. ; Jérôme, Valérie ; Agarwal, Seema ; Freitag, Ruth ; Greiner, Andreas:
Perfusion Cultivation of Artificial Liver ECM in Fibrous Polymer Sponges Biomimicking Scaffolds for Tissue Engineering.
In: Biomacromolecules. Vol. 21 (2020) Issue 10 . - pp. 4094-4104.
DOI: https://doi.org/10.1021/acs.biomac.0c00900

Schleifer, Felix ; Fleck, Michael ; Holzinger, Markus ; Lin, Yueh-Yu ; Glatzel, Uwe:
Phase-Field Modeling of γ' and γ'' Precipitate Size Evolution During Heat Treatment of Ni-Based Superalloys.
In: Tin, Sammy ; Hardy, Mark ; Clews, Justin ; Cormier, Jonathan ; Feng, Qiang ; Marcin, John ; O'Brien, Chris ; Suzuki, Akane (ed.): Superalloys 2020 : Proceedings of the 14th International Symposium on Superalloys. - Cham : Springer International Publishing, 2020 . - pp. 500-508
DOI: https://doi.org/10.1007/978-3-030-51834-9_49

Schleifer, Felix ; Holzinger, Markus ; Lin, Yueh-Yu ; Glatzel, Uwe ; Fleck, Michael:
Phase-field modeling of γ/γ'' microstructure formation in Ni-based superalloys with high γ'' volume fraction.
In: Intermetallics. Vol. 120 (2020) . - 106745.
DOI: https://doi.org/10.1016/j.intermet.2020.106745

Standau, Tobias ; Schreiers, Peter ; Hilgert, Kathrin ; Altstädt, Volker:
Properties of bead foams with increased heat stability made from the engineering polymer polybutylene terephthalate (E-PBT).
In: Cebeci, Fevzi Cakmak ; Menceloglu, Yusuf Z. ; Unal, Serkan ; Ulcer, Yakup (ed.): Proceedings of the 35th International Conference of the Polymer Processing Society (PPS-35). - Melville, NY : AIP Publications, 2020 . - No. 020039 . - (AIP Conference Proceedings ; 2205 )
DOI: https://doi.org/10.1063/1.5142954

Bargel, Hendrik ; Hopfe, Charlotte ; Scheibel, Thomas:
Proteinfasern als Hochleistungsmaterial : Evolution, Eigenschaften und Anwendungen von Spinnenseide.
In: Biologie in unserer Zeit. Vol. 50 (2020) Issue 6 . - pp. 434-443.
DOI: https://doi.org/10.1002/biuz.202010724

Faghih-Naini, Sara ; Aizinger, Vadym ; Kuckuk, Sebastian ; Zint, Daniel ; Grosso, Roberto ; Köstler, Harald:
Quadrature-free discontinuous Galerkin method with code generation features for shallow water equations on automatically generated block-structured meshes.
In: Advances in Water Resources. Vol. 138 (2020) . - 103552.
DOI: https://doi.org/10.1016/j.advwatres.2020.103552

Kumari, Sushma ; Bargel, Hendrik ; Scheibel, Thomas:
Recombinant Spider Silk–Silica Hybrid Scaffolds with Drug-Releasing Properties for Tissue Engineering Applications.
In: Macromolecular Rapid Communications. Vol. 41 (2020) Issue 1 . - 1900426.
DOI: https://doi.org/10.1002/marc.201900426

Müller, Fabian ; Zainuddin, Shakir ; Scheibel, Thomas:
Roll-to-Roll Production of Spider Silk Nanofiber Nonwoven Meshes Using Centrifugal Electrospinning for Filtration Applications.
In: Molecules. Vol. 25 (2020) Issue 23 . - 5540.
DOI: https://doi.org/10.3390/molecules25235540

Lefevre, Mathilde ; Flammang, Patrick ; Aranko, A.Sesilja ; Linder, Markus B. ; Scheibel, Thomas ; Humenik, Martin ; Leclercq, Maxime ; Surin, Mathieu ; Tafforeau, Lionel ; Wattiez, Ruddy ; Leclèrc, Philippe ; Hennebert, Elise:
Sea star-inspired recombinant adhesive proteins self-assemble and adsorb on surfaces in aqueous environments to form cytocompatible coatings.
In: Acta Biomaterialia. Vol. 112 (2020) . - pp. 62-74.
DOI: https://doi.org/10.1016/j.actbio.2020.05.036

Liensdorf, Tom ; Schoch, Rebecca ; Lang, Marieluise ; Langhof, Nico ; Hochrein, Thomas ; Bastian, Martin ; Krenkel, Walter:
Silicon infiltrated silicon carbide from extruded thermoplastic wood polymer composites.
In: International Journal of Applied Ceramic Technology. Vol. 17 (2020) Issue 1 . - pp. 3-10.
DOI: https://doi.org/10.1111/ijac.13404

Neubauer, Vanessa ; Scheibel, Thomas:
Spider Silk Fusion Proteins for Controlled Collagen Binding and Biomineralization.
In: ACS Biomaterials Science & Engineering. Vol. 6 (2020) Issue 10 . - pp. 5599-5608.
DOI: https://doi.org/10.1021/acsbiomaterials.0c00818

Schemann, Christoph:
Spores of Speculation : Negotiating Mold as Contamination.
In: Cortiel, Jeanne ; Hanke, Christine ; Hutta, Jan Simon ; Milburn, Colin (ed.): Practices of Speculation : Modeling, Embodiment, Figuration. - Bielefeld : transcript, 2020 . - pp. 145-165 . - (Culture & Theory ; 202 )
DOI: https://doi.org/10.14361/9783839447512-007

Ernst, Wolf-Dieter:
Sprechtechnik als Zeitobjekt : Elsie Fogertys 'The Speaking of the English Verse' (1923).
In: Dreckmann, Kathrin ; Butte, Maren ; Vomberg, Elfi (ed.): Technologien des Performativen : das Theater und seine Techniken. - Bielefeld : transcript, 2020 . - pp. 223-234 . - (Theater ; 137 )

Chen, Dehua ; Daoud, Haneen ; Scherm, Florian ; Klötzer, Bernd ; Hauck, Christoph ; Glatzel, Uwe:
Stainless Steel Powder Produced by a Novel Arc Spray Process.
In: Journal of Materials Research and Technology. Vol. 9 (2020) Issue 4 . - pp. 8314-8322.
DOI: https://doi.org/10.1016/j.jmrt.2020.05.076

Diaz, Ivonne L. ; Sierra, Cesar A. ; Jérôme, Valérie ; Freitag, Ruth ; Perez, León D.:
Target grafting of poly(2-(dimethylamino)ethyl methacrylate) to biodegradable block copolymers.
In: Journal of Polymer Science. Vol. 58 (2020) Issue 16 . - pp. 2168-2180.
DOI: https://doi.org/10.1002/pol.20200204

Lang, Alexander ; Schwarzinger, Stephan:
Die technische Trocknung von unreif geernteten Honigen : Eine Auslegung der europäischen Honig-Richtlinie.
In: Deutsche Lebensmittel-Rundschau. Vol. 116 (2020) Issue 2 . - pp. 57-62.

Gadelmeier, Christian ; Haas, Sebastian ; Lienig, Tim ; Manzoni, Anna M. ; Feuerbacher, Michael ; Glatzel, Uwe:
Temperature Dependent Solid Solution Strengthening in the High Entropy Alloy CrMnFeCoNi in Single Crystalline State.
In: Metals. Vol. 10 (2020) Issue 11 . - 1412.
DOI: https://doi.org/10.3390/met10111412

Manzoni, Anna M. ; Haas, Sebastian ; Kropf, Holger ; Duarte Correa, Jazmin Maria ; Cakir, Cafer Tufan ; Dubois, Felix ; Többens, Daniel M. ; Glatzel, Uwe:
Temperature evolution of lattice misfit in Hf and Mo variations of the Al₁₀Co₂₅Cr₈Fe₁₅Ni₃₆Ti₆ compositionally complex alloy.
In: Scripta Materialia. Vol. 188 (2020) . - pp. 74-79.
DOI: https://doi.org/10.1016/j.scriptamat.2020.07.013

Ulan kyzy, Sonun ; Völkl, Rainer ; Munz, Oliver ; Fischer, Tim ; Weizenbach, Sarah ; Glatzel, Uwe:
Thermo-physical properties of Hastelloy X and Haynes 214 close to the melting range.
In: Materials Science and Technology. Vol. 36 (2020) Issue 10 . - pp. 1012-1019.
DOI: https://doi.org/10.1080/02670836.2020.1753154

Jérôme, Valérie ; Synatschke, Christopher V. ; Freitag, Ruth:
Transient Destabilization of Biological Membranes Contributes to the Superior Performance of Star-Shaped PDMAEMA in Delivering pDNA.
In: ACS Omega. Vol. 5 (2020) Issue 41 . - pp. 26640-26654.
DOI: https://doi.org/10.1021/acsomega.0c03367

Flothow, Amelie:
Untersuchung mathematischer Krankheitsmodelle.
Bayreuth , 2020
(Master's, 2020 , Universität Bayreuth, Fakultät für Mathematik, Physik und Informatik, Lehrstuhl für Wissenschaftliches Rechnen)

Bruns, Nico ; Scheibel, Thomas:
Virtual Special Issue Biomimetic Polymers.
In: European Polymer Journal. Vol. 122 (2020) . - No. 109370.
DOI: https://doi.org/10.1016/j.eurpolymj.2019.109370

Strube, Franziska ; Rosemann, Bernd:
Der Weg zur CO₂-autarken Brauerei : Verfahren zur CO₂-Rückgewinnung für kleine und mittlere Brauereien.
In: Brauindustrie. Vol. 105 (2020) Issue 6 . - pp. 10-12.

Auepanwiriyakul, Chaiyawan ; Waibel, Sigourney ; Songa, Joanna ; Bentley, Paul ; Faisal, A. Aldo:
Accuracy and Acceptability of Wearable Motion Tracking for Inpatient Monitoring Using Smartwatches.
In: Sensors. Vol. 20 (2020) Issue 24 . - 7313.
DOI: https://doi.org/10.3390/s20247313

Auepanwiriyakul, Chaiyawan ; Waibel, Sigourney ; Songa, Joanna ; Bentley, Paul ; Faisal, A. Aldo:
Accuracy and Acceptability of Wearable Motion Tracking Smartwatches for Inpatient Monitoring.
medRxiv , 2020
DOI: https://doi.org/10.1101/2020.07.24.20160663

Haar, Shlomi ; Faisal, A. Aldo:
Brain Activity Reveals Multiple Motor-Learning Mechanisms in a Real-World Task.
In: Frontiers in Human Neuroscience. Vol. 14 (2020) . - 354.
DOI: https://doi.org/10.3389/fnhum.2020.00354

Haar, Shlomi ; Faisal, A. Aldo:
Brain activity reveals multiple motor-learning mechanisms in a real-world task.
bioRxiv , 2020
DOI: https://doi.org/10.1101/2020.03.04.976951

Zhi, Jinna ; Chen, Zhe ; Yan, Wen ; Schafföner, Stefan ; Dai, Yajie ; Lin, Xiaoli:
Effect of Al(OH)₃ particle size on microstructures and strengths of porous MgAl₂O₄ ceramics.
In: Processing and Application of Ceramics. Vol. 14 (2020) Issue 3 . - pp. 268-275.
DOI: https://doi.org/10.2298/PAC2003268Z

Zhou, Wenying ; Yan, Wen ; Li, Nan ; Li, Yuanbing ; Schafföner, Stefan ; Dai, Yajie ; Zhang, Zheng ; Yuan, Lin:
Fabrication, characterization and thermal-insulation modeling of foamed mullite-SiC ceramics.
In: Journal of Alloys and Compounds. Vol. 829 (2020) . - 154523.
DOI: https://doi.org/10.1016/j.jallcom.2020.154523

Odonkor, Charles ; Kuwabara, Anne ; Tomkins-Lane, Christy ; Zhang, Wei ; Muaremi, Amir ; Leutheuser, Heike ; Sun, Ruopeng ; Smuck, Matthew:
Gait features for discriminating between mobility-limiting musculoskeletal disorders : Lumbar spinal stenosis and knee osteoarthritis.
In: Gait & Posture. Vol. 80 (2020) . - pp. 96-100.
DOI: https://doi.org/10.1016/j.gaitpost.2020.05.019

Yadzhak, Nataliya:
Generalization of the equivalent area method for the case of short fatigue cracks in a three-dimensional body.
In: Visnyk of the Lviv University : Series Mechanics and Mathematics. Vol. 89 (2020) . - pp. 106-122.
DOI: https://doi.org/10.30970/vmm.2020.89.106-122

Ortega, Pablo ; Zhao, Tong ; Faisal, A. Aldo:
HYGRIP: Full-Stack Characterization of Neurobehavioral Signals (fNIRS, EEG, EMG, Force, and Breathing) During a Bimanual Grip Force Control Task.
In: Frontiers in Neuroscience. Vol. 14 (2020) . - 919.
DOI: https://doi.org/10.3389/fnins.2020.00919

Bartfeld, Sina ; Clemens, Stephan ; Erb, Tobias ; Fangerau, Heiner ; Fehse, Boris ; Hampel, Jürgen ; Hucho, Ferdinand ; Korte, Martin ; Mundlos, Stefan ; Reich, Jens ; Schicktanz, Silke ; Taupitz, Jochen ; Walter, Jörn ; Winkler, Eva ; Zenke, Martin:
Kernaussagen und Handlungsempfehlungen zu Organoiden.
In: Bartfeld, Sina ; Schickl, Hannah ; Alev, Cantas ; Koo, Bon-Kyoung ; Pichl, Anja ; Osterheider, Angela ; Marx-Stölting, Lilian (ed.): Organoide : Ihre Bedeutung für Forschung, Medizin und Gesellschaft. - Baden-Baden : Nomos, 2020 . - pp. 13-28
DOI: https://doi.org/10.5771/9783748908326-13

Haar, Shlomi ; van Assel, Camille M. ; Faisal, A. Aldo:
Motor learning in real-world pool billiards.
In: Scientific Reports. Vol. 10 (2020) Issue 1 . - 20046.
DOI: https://doi.org/10.1038/s41598-020-76805-9

Haar, Shlomi ; van Assel, Camille M. ; Faisal, A. Aldo:
Motor learning in real-world pool billiards.
bioRxiv , 2020
DOI: https://doi.org/10.1101/612218

Zhang, Zhenyan ; Yan, Wen ; Li, Nan ; Schafföner, Stefan ; Zhou, Wenying ; Chen, Zhe ; Wei, Jiawei:
Mullite-corundum gas-permeable refractories reinforced by in-situ formed SiC whiskers.
In: Ceramics International. Vol. 46 (2020) Issue 16, Part A . - pp. 25155-25163.
DOI: https://doi.org/10.1016/j.ceramint.2020.06.302

Patel, Brijesh V. ; Haar, Shlomi ; Handslip, Rhodri ; Lee, Teresa Mei-Ling ; Patel, Sunil ; Harston, J. Alex ; Hosking-Jervis, Feargus ; Kelly, Donna ; Sanderson, Barnaby ; Bogatta, Barbara ; Tatham, Kate ; Welters, Ingeborg ; Camporota, Luigi ; Gordon, Anthony C. ; Komorowski, Matthieu ; Antcliffe, David ; Prowle, John R. ; Puthucheary, Zudin ; Faisal, A. Aldo:
Natural history, trajectory, and management of mechanically ventilated COVID-19 patients in the United Kingdom.
medRxiv , 2020
DOI: https://doi.org/10.1101/2020.11.10.20226688

Rito Lima, Ines ; Haar, Shlomi ; Di Grassi, Lucas ; Faisal, A. Aldo:
Neurobehavioural signatures in race car driving : a case study.
In: Scientific Reports. Vol. 10 (2020) Issue 1 . - 11537.
DOI: https://doi.org/10.1038/s41598-020-68423-2

Chen, Zhe ; Yan, Wen ; Schafföner, Stefan ; Dai, Yajie ; Wang, Qiang ; Li, Guangqiang:
A novel approach to lightweight alumina‐carbon refractories for flow control of molten steel.
In: Journal of the American Ceramic Society. Vol. 103 (2020) Issue 8 . - pp. 4713-4724.
DOI: https://doi.org/10.1111/jace.17137

Kanyo, Janos E. ; Schafföner, Stefan ; Uwanyuze, R. Sharon ; Leary, Kaitlynn S.:
An overview of ceramic molds for investment casting of nickel superalloys.
In: Journal of the European Ceramic Society. Vol. 40 (2020) Issue 15 . - pp. 4955-4973.
DOI: https://doi.org/10.1016/j.jeurceramsoc.2020.07.013

Qi, Jiangtao ; Yan, Wen ; Chen, Zhe ; Schafföner, Stefan ; Zhou, Wenying ; Li, Guangqiang ; Wang, Qiang:
Preparation and characterization of microporous mullite-corundum refractory aggregates with high strength and closed porosity.
In: Ceramics International. Vol. 46 (2020) Issue 6 . - pp. 8274-8280.
DOI: https://doi.org/10.1016/j.ceramint.2019.12.056

Schafföner, Stefan:
Reactions of alkaline earth zirconate refractories with titanium alloys.
In: MATEC Web of Conferences. Vol. 321 (2020) . - 10012.
DOI: https://doi.org/10.1051/matecconf/202032110012

2019

Humenik, Martin ; Pawar, Kiran ; Scheibel, Thomas:
Nanostructured, Self-Assembled Spider Silk Materials for Biomedical Applications.
In: Perrett, Sarah ; Buell, Alexander K. ; Knowles, Thomas P. J. (ed.): Biological and Bio-inspired Nanomaterials : Properties and Assembly Mechanisms. - Singapore , 2019 . - pp. 187-221 . - (Advances in Experimental Medicine and Biology ; 1174 )
DOI: https://doi.org/10.1007/978-981-13-9791-2_6

Chudej, Kurt ; Albrecht, Gaby ; Wessely, Anja ; Fischer, Anne:
Mathematische Modellierung und Numerische Simulation gefährlicher Krankheiten.
2019
Event: Kolloquium des Instituts für Mathematik und Informatik, Universität Greifswald , 15.10.2019 , Greifswald, Deutschland.
(Conference item: Lecture series , Speech )

Faghih-Naini, Sara ; Kuckuk, Sebastian ; Zint, Daniel ; Aizinger, Vadym ; Köstler, Harald ; Grosso, Roberto:
Beyond ExaStencils : Code Generation for Quadrature-Free Discontinuous Galerkin Methods in Ocean Modeling.
2019
Event: SPPEXA Final Symposium 2019, ExaStencils , October 21-23, 2019 , Dresden.
(Conference item: Conference , Speech )

Kühlmann, Torsten M. ; Becker, Julia ; Eimecke, Jörgen ; Derra, Nicholas Daniel ; Kettl, Julian ; Wagner, Johanna ; Hofmann, Anni ; Schweizer, Elisabeth:
BF/M-Spiegel: Journal des Betriebswirtschaftlichen Forschungszentrums für Fragen der mittelständischen Wirtschaft e. V. an der Universität Bayreuth, 2019, Ausgabe 2.
BF/M-Spiegel. (2019) Issue 2 . - 47 p.
DOI: https://doi.org/10.15495/EPub_UBT_00004599

Faghih-Naini, Sara ; Aizinger, Vadym ; Kuckuk, Sebastian ; Zint, Daniel ; Köstler, Harald ; Grosso, Roberto:
Quadrature-free Discontinuous Galerkin Method for Shallow-water Equations.
2019
Event: Earth System Modeling Summer School , 2019 September 10-19 , Bad Aibling, Germany.
(Conference item: Workshop , Poster )

Faghih-Naini, Sara ; Aizinger, Vadym ; Kuckuk, Sebastian ; Zint, Daniel ; Köstler, Harald ; Grosso, Roberto:
Quadrature-free Discontinuous Galerkin Method for Shallow-water Equations.
2019
Event: 9th International Congress on Industrial and Applied Mathematics , 2019 July 15-19 , Valencia, Spain.
(Conference item: Conference , Speech )

Rosemann, Bernd:
Reverse Engineering.
2019
Event: Anwendungszentrum 3D-Druck Oberfranken - Eröffnung Digitales Bauteil , 16.05.2019 , Bayreuth.
(Conference item: Lecture series , Speech )

Kühlmann, Torsten M. ; Becker, Julia ; Eimecke, Jörgen ; Hofmann, Anni ; Kettl, Julian ; Lutz, Saskia ; Schweizer, Elisabeth:
BF/M-Spiegel: Journal des Betriebswirtschaftlichen Forschungszentrums für Fragen der mittelständischen Wirtschaft e. V. an der Universität Bayreuth, 2019, Ausgabe 1.
BF/M-Spiegel. (2019) Issue 1 . - 39 p.
DOI: https://doi.org/10.15495/EPub_UBT_00004598

Schemann, Christoph:
Sporen der Spekulation : Kontaminations-Verhandlungen von Schimmel.
2019
Event: Neue Kulturgeographie XVI , 31.01.-02.02.2019 , Eichstätt.
(Conference item: Conference , Speech )

Faghih-Naini, Sara:
Theory and Numerics for Convective Heat Transport in Nanofluids.
Erlangen , 2019
(Master's, 2019 , Friedrich-Alexander-Universität Erlangen-Nürnberg)

Krenkel, Walter:
Advanced Ceramic Materials for High Temperature Applications.
2019
Event: Humboldt Symposium 2019 , June 30-July 03, 2019 , Cayo Santa Maria, Cuba.
(Conference item: Conference , Speech )

Jende, Lucas:
Analyse und Simulation von gefährlichen Krankheiten.
Bayreuth , 2019
(Master's, 2019 , Universität Bayreuth, Fakultät für Mathematik, Physik und Informatik, Lehrstuhl für Wissenschaftliches Rechnen)

Bay, Christian ; Mahr, Alexander:
Anwendersicherheit beim Laser-Strahlschmelzen von Metallpulvern im Rahmen der VDI-Richtlinie 3405.
In: Kynast, Michael ; Eichmann, Michael ; Witt, Gerd (ed.): Rapid.Tech + FabCon 3.D International Hub for Additive Manufacturing : Exhibition, Conference, Networking : Proceedings of the 16th Rapid.Tech Conference Erfurt, Germany, 25 – 27 June 2019. - München : Carl-Hanser Verlag, 2019 . - pp. 430-440
DOI: https://doi.org/10.3139/9783446462441.030

Aizinger, Vadym ; Hajduk, Hennes:
Bathymetry reconstruction using modified shallow-water equations discretized by a discontinuous Galerkin method.
2019
Event: Workshop der GOR-Arbeitsgruppe Simulation und Optimierung komplexer Systeme , 19.-20.9.2019 , Oberammergau, Deutschland.
(Conference item: Workshop , Speech )

Lengsfeld, Hauke ; Mainka, Hendrik ; Altstädt, Volker:
Carbonfasern : Herstellung, Anwendung, Verarbeitung.
München : Hanser , 2019 . - XVIII, 215 p.

DOI: https://doi.org/10.3139/9783446460805

Krenkel, Walter:
Ceramic Matrix Composites : Materials for Lightweight and High Temperature Structures.
2019
Event: 6th International Conference on Recent Advances in Composite Materials (ICRACM-2019) , February 25-28, 2019 , Varanasi, India.
(Conference item: Conference , Speech )

Shen, Bo-Wen ; Reyes, Tiffany ; Faghih-Naini, Sara:
Coexistence of Chaotic and Non-chaotic Orbits in a New Nine-Dimensional Lorenz Model.
In: Skiadas, Christos H. ; Lubashevsky, Ihor (ed.): 11th Chaotic Modeling and Simulation International Conference. - Cham : Springer, 2019 . - pp. 239-255
DOI: https://doi.org/10.1007/978-3-030-15297-0_22

Fischer, Tim ; Werner, Ewald ; Ulan kyzy, Sonun ; Munz, Oliver:
Crystal plasticity modeling of polycrystalline Ni-base superalloy honeycombs under combined thermo-mechanical loading.
In: Continuum Mechanics and Thermodynamics. Vol. 31 (2019) Issue 3 . - pp. 703-713.
DOI: https://doi.org/10.1007/s00161-018-0721-z

Almeida, Renato S. M. ; Yang, Li ; Besser, Benjamin ; Xiao, Peng ; Zhou, Wei ; Brückner, Alexander ; Langhof, Nico ; Tushtev, Kamen ; Krenkel, Walter ; Rezwan, Kurosch:
Damage analysis of 2.5D C/C-SiC composites subjected to fatigue loadings.
In: Journal of the European Ceramic Society. Vol. 39 (2019) Issue 7 . - pp. 2244-2250.
DOI: https://doi.org/10.1016/j.jeurceramsoc.2019.01.014

Popp, Robert ; Haas, Sebastian ; Scherm, Florian ; Redermeier, Alice ; Povoden-Karadeniz, Erwin ; Göhler, Thomas ; Glatzel, Uwe:
Determination of Solubility Limits of Refractory Elements in TCP Phases of the Ni-Mo-Cr Ternary System Using Diffusion Multiples.
In: Journal of Alloys and Compounds. Vol. 788 (2019) . - pp. 67-74.
DOI: https://doi.org/10.1016/j.jallcom.2019.01.329

Ulan kyzy, Sonun ; Völkl, Rainer ; Munz, Oliver ; Fischer, Tim ; Glatzel, Uwe:
The Effect of Brazing on Microstructure of Honeycomb Liner Material Hastelloy X.
In: Journal of Materials Engineering and Performance. Vol. 28 (2019) Issue 4 . - pp. 1909-1913.
DOI: https://doi.org/10.1007/s11665-019-03910-w

Pfänder, Jochen:
Einführung und Finanzierung von Innovationen im GKV-System : eine theoretische und empirische Analyse anhand von Medizinprodukten.
Bayreuth , 2019 . - III, 175, xiii p.
( Doctoral thesis, 2019 , Universität Bayreuth, Rechts- und Wirtschaftswissenschaftliche Fakultät)
DOI: https://doi.org/10.15495/EPub_UBT_00004405

Ta, Na ; Wang, Kai ; Yin, Xiaoyan ; Fleck, Michael ; Hüter, Claas:
Elastically induced pattern formation in the initial and frustrated growth regime of bainitic subunits.
In: AIMS Materials Science. Vol. 6 (2019) Issue 1 . - pp. 52-62.
DOI: https://doi.org/10.3934/matersci.2019.1.52

Saric, Merisa ; Scheibel, Thomas:
Engineering of silk proteins for materials applications.
In: Current Opinion in Biotechnology. Vol. 60 (2019) . - pp. 213-220.
DOI: https://doi.org/10.1016/j.copbio.2019.05.005

Purnhagen, Kai:
EU Food Law : A Very Short Introduction.
In: Dries, Liesbeth ; Heijman, Wim ; Jongeneel, Roel ; Purnhagen, Kai ; Wesseler, Justus (ed.): EU Bioeconomy Economics and Policies. Vol. 2. - Cham : Palgrave Macmillan, 2019 . - pp. 17-26 . - (Palgrave Advances in Bioeconomy : Economics and Policies )
DOI: https://doi.org/10.1007/978-3-030-28642-2_2

Häublein, Markus ; Peter, Karin ; Brückner, Alexander ; Altstädt, Volker:
Evaluation of DOPO and Nano-Silica Modified Epoxy Resin Systems as Low Viscous, Flame Retardant Additives for Infusion and Injection Processing of Carbon Fiber Reinforced Plastics.
In: Key Engineering Materials. Vol. 809 (2019) . - pp. 3-8.
DOI: https://doi.org/10.4028/www.scientific.net/KEM.809.3

Manzoni, Anna M. ; Haas, Sebastian ; Yu, J. M. ; Daoud, Haneen ; Glatzel, Uwe ; Aboulfadl, Hisham ; Mücklich, Frank ; Duran, Rüya ; Schmitz, Guido ; Többens, Daniel M. ; Matsumura, Syo ; Vogel, Florian ; Wanderka, Nelia:
Evolution of γ/γ' phases, their misfit and volume fractions in Al₁₀Co₂₅Cr₈Fe₁₅Ni₃₆Ti₆ compositionally complex alloy.
In: Materials Characterization. Vol. 154 (2019) . - pp. 363-376.
DOI: https://doi.org/10.1016/j.matchar.2019.06.009

Dauth, Markus:
The evolutionary steps from nonlinear to turbulent waves on gravity-driven films over topography.
Bayreuth , 2019 . - 102 p.
( Doctoral thesis, 2019 , Universität Bayreuth, Fakultät für Ingenieurwissenschaften)
DOI: https://doi.org/10.15495/EPub_UBT_00004468

Standau, Tobias ; Altstädt, Volker:
Foams.
In: Karger-Kocsis, József ; Bárány, Tamas (ed.): Polypropylene handbook : morphology, blends and composites. - Cham : Springer, 2019 . - pp. 579-641
DOI: https://doi.org/10.1007/978-3-030-12903-3_10

Eckardt, Christian ; Friedrich, Maximilian ; Wamser, Thomas ; Wolff, Nadja ; Metzger, Klaus:
Gut gerüstet gegen Druck und Hitze : Faserverstärkte Keramik-Armierungen für den Rohrleitungsbau.
In: Chemie-Technik. Vol. 48 (2019) Issue 4 . - pp. 38-40.

Fleck, Michael ; Schleifer, Felix ; Holzinger, Markus ; Glatzel, Uwe:
Improving the numerical solution of the phase-field equation by the systematic integration of analytic properties of the phase-field profile function.
In: Gleim, Tobias (ed.): 8th GACM Colloquium on Computational Mechanics for Young Scientists from Academia and Industry : Proceedings. - Kassel : Kassel University Press, 2019 . - pp. 445-449

Rinsche, Florian ; Schmid, Andreas:
Intersektorale Gesundheitszentren als Versorgungsinnovation.
In: KU Gesundheitsmanagement. Vol. 88 (2019) Issue 3 . - pp. 55-57.

Steiner, Dominik ; Lang, Gregor ; Fischer, Laura ; Winkler, Sophie ; Fey, Tobias ; Greil, Peter ; Scheibel, Thomas ; Horch, Raymund E. ; Arkudas, Andreas:
Intrinsic Vascularization of Recombinant eADF4(C16) Spider Silk Matrices in the Arteriovenous Loop Model.
In: Tissue Engineering Part A. Vol. 25 (2019) Issue 21-22 . - pp. 1504-1513.
DOI: https://doi.org/10.1089/ten.tea.2018.0360

Akram, Muhammad Yasir ; Casalegno, Valentina ; Ferraris, Monica ; Puchas, Georg ; Krenkel, Walter ; Roszeitis, Sven:
Joining and mechanical testing of oxide/oxide (Nextel ™610/aluminazirconia) ceramic composites.
In: Journal of the European Ceramic Society. Vol. 39 (2019) Issue 7 . - pp. 2510-2517.
DOI: https://doi.org/10.1016/j.jeurceramsoc.2019.02.020

Franzl, Peter ; Jacobs, Karin ; Möller, Martin ; Scheibel, Thomas ; Sternberg, Karin:
Materialforschung : Impulsgeber Natur: Innovationspotenzial biologisch inspirierter Materialien und Werkstoffe.
acatech - Deutsche Akademie der Technikwissenschaften
München , 2019 . - 140 S. - (acatech Diskussion )

Liensdorf, Tom ; Langhof, Nico ; Krenkel, Walter:
Mechanical properties of PEEK-Derived C/SiC Composites with Different Fiber Lengths.
In: Advanced Engineering Materials. Vol. 21 (2019) Issue 5 . - 1800835.
DOI: https://doi.org/10.1002/adem.201800835

Röber, Matthias ; Laroque, Sophie ; Scheibel, Thomas ; Börner, Hans G.:
Modulating the collagen triple helix formation by switching : Positioning effects of depsi-defects on the assembly of [Gly-Pro-Pro]7 collagen mimetic peptides.
In: European Polymer Journal. Vol. 112 (2019) . - pp. 301-305.
DOI: https://doi.org/10.1016/j.eurpolymj.2018.12.045

Wang, Jia ; Suhre, Michael H. ; Scheibel, Thomas:
A mussel polyphenol oxidase-like protein shows thiol-mediated antioxidantactivity.
In: European Polymer Journal. Vol. 113 (2019) . - pp. 305-312.
DOI: https://doi.org/10.1016/j.eurpolymj.2019.01.069

Wicklein, Vanessa ; Singer, Bernhard B. ; Scheibel, Thomas ; Salehi, Sahar:
Nanoengineered Biomaterials for corneal regeneration.
In: Mozafari, Masoud (ed.): Nanoengineered Biomaterials for Regenerative Medicine : Micro and Nano Technologies. - Amsterdam : Elsevier, 2019 . - pp. 379-415
DOI: https://doi.org/10.1016/B978-0-12-813355-2.00017-X

Molina, Anton ; Scheibel, Thomas ; Humenik, Martin:
Nanoscale patterning of surface via DNA directed spider silk assembly.
In: Biomacromolecules. Vol. 20 (2019) Issue 1 . - pp. 347-352.
DOI: https://doi.org/10.1021/acs.biomac.8b01333

Puchas, Georg ; Held, Alexander ; Krenkel, Walter:
Near-net shape manufacture process for oxide fiber composites (OFC).
In: Materials Today : Proceedings. Vol. 16 (2019) Issue 1 . - pp. 49-58.
DOI: https://doi.org/10.1016/j.matpr.2019.05.278

Spatz, Carolin ; Puchas, Georg ; Langhof, Nico ; Krenkel, Walter:
Neuartige Preformen aus hochsteifen technischen Fasern für Verbundkeramiken.
In: Werkstoffe in der Fertigung. (2019) Issue 3 . - pp. 20-23.

Manzoni, Anna M. ; Glatzel, Uwe:
New Multiphase Compositionally Complex Alloys Driven by the High Entropy Alloy Approach.
In: Materials Characterization. Vol. 147 (2019) . - pp. 512-532.
DOI: https://doi.org/10.1016/j.matchar.2018.06.036

Albrecht, Gaby ; Chudej, Kurt:
Optimal control of a two serotype dengue fever model with vaccination of seropositive humans.
2019
Event: International Conference on Scientific Computation and Differential Equations (SciCADE 2019) , 22.-26.7.2019 , Innsbruck, Österreich.
(Conference item: Conference , Speech )

Albrecht, Gaby ; Chudej, Kurt:
Optimal disease control in a new mathematical dengue fever model.
2019
Event: OCIP 2019 : Workshop on Numerical Methods for Optimal Control and Inverse Problems , 11.-13.3.2019 , TU München, Garching bei München, Deutschland.
(Conference item: Workshop , Speech )

Fischer, Anne ; Chudej, Kurt ; Pesch, Hans Josef:
Optimal vaccination and control strategies against dengue.
In: Mathematical Methods in the Applied Sciences. Vol. 42 (2019) Issue 10 . - pp. 3496-3507.
DOI: https://doi.org/10.1002/mma.5594

Chudej, Kurt ; Albrecht, Gaby:
Optimale Impfstrategien für Dengue-seropositiv Erkrankte.
2019
Event: Workshop Simulation in den Umwelt- und Geowissenschaften , 8.-10.5.2019 , Kassel, Deutschland.
(Conference item: Workshop , Speech )

Wolff, Nadja ; Langhof, Nico ; Krenkel, Walter:
Oxidation Behavior of Alumina Fiber Reinforced SiCO Composites for a Co-Firing Process on Steel Pipes.
In: Advanced Engineering Materials. Vol. 21 (2019) Issue 6 . - 1900233.
DOI: https://doi.org/10.1002/adem.201900233

Holzinger, Markus ; Schleifer, Felix ; Glatzel, Uwe ; Fleck, Michael:
Phase-field modeling of γ'-precipitate shapes in nickel-base superalloys and their classification by moment invariants.
In: The European Physical Journal B. Vol. 92 (2019) . - 208.
DOI: https://doi.org/10.1140/epjb/e2019-100256-1

Gautam, Ajay ; Sadowski, Marcel ; Prinz, Nils ; Eickhoff, Henrik ; Minafra, Nicolo ; Ghidiu, Michael ; Culver, Sean P. ; Albe, Karsten ; Fässler, Thomas F. ; Zobel, Mirijam ; Zeier, Wolfgang G.:
Rapid crystallization and kinetic freezing of site-disorder in the lithium superionic argyrodite Li₆PS₅Br.
In: Chemistry of Materials. Vol. 31 (2019) Issue 24 . - pp. 10178-10185.
DOI: https://doi.org/10.1021/acs.chemmater.9b03852

Ulrich, Anke Silvia ; Kaiser, Timo ; Ionescu, Emanuel ; Riedel, Ralf ; Galetz, Mathias C.:
Reactive element effect applied by alloying and SiHfBCN coating on the oxidation of pure chromium.
In: Oxidation of Metals. Vol. 92 (2019) . - pp. 281-302.
DOI: https://doi.org/10.1007/s11085-019-09926-w

Pawar, Kiran ; Welzel, Georg ; Haynl, Christian ; Schuster, Stefan ; Scheibel, Thomas:
Recombinant Spider Silk and Collagen-Based Nerve GuidanceConduits Support Neuronal Cell Differentiation and Functionality inVitro.
In: ACS Applied Bio Materials. Vol. 2 (2019) Issue 11 . - pp. 4872-4880.
DOI: https://doi.org/10.1021/acsabm.9b00628

Schötz, Sebastian ; Rosemann, Bernd ; Reiser, Sophia Elisabeth:
Relevant data when implementing tools of quality in cyber-physical systems.
In: Proceedings in Manufacturing Systems. Vol. 14 (2019) Issue 2 . - pp. 43-48.

Jérôme, Valérie ; Freitag, Ruth ; Schüler, Dirk ; Mickoleit, Frank:
SEAP activity measurement in reporter cell-based assays using BCIP / NBT as substrate.
In: Analytical Biochemistry. Vol. 585 (2019) . - 113402.
DOI: https://doi.org/10.1016/j.ab.2019.113402

Krenkel, Walter ; Liensdorf, Tom ; Winkelbauer, Jonas:
Short Fiber Ceramic Matrix Composites (CMCs).
2019
Event: XVI European Ceramic Society Conference and Exhibition (ECerS) , 16.-20. Juni 2019 , Torino, Italien.
(Conference item: Conference , Speech )

Krenkel, Walter ; Liensdorf, Tom ; Puchas, Georg ; Winkelbauer, Jonas:
Short Fiber Reinforced CMCs : A Cost-Efficient Approach for Net-Shaped Components.
2019
Event: PACRIM 13, The 13th Pacific Rim Conference of Ceramic Societies , 27.10.-1.11.2019 , Okinawa, Japan.
(Conference item: Conference , Speech )

Krenkel, Walter ; Liensdorf, Tom:
SiSiC Ceramics based on Wood Polymer Composites (WPC).
2019
Event: 43rd International Conference and Exposition on Advanced Ceramics and Composites , January, 27- February 1, 2019 , Daytona Beach, Florida, USA.
(Conference item: Conference , Speech )

Herold, Heike ; Aigner, Tamara B. ; Grill, Carolin ; Krüger, Stefanie ; Taubert, Andreas ; Scheibel, Thomas:
SpiderMAEn : recombinant spider silk-basedhybrid materials for advanced energy technology.
In: Bioinspired, Biomimetic and Nanobiomaterials. Vol. 8 (2019) Issue 1 . - pp. 99-108.
DOI: https://doi.org/10.1680/jbibn.18.00007

Habla, Franz ; Kropka, Michael ; Mühlbacher, Mathias ; Neumeyer, Thomas ; Altstädt, Volker:
Tailor Made Hybrid Laminates Based on UD-Tapes : A Way to Efficient Thermoplastic Components.
In: Key Engineering Materials. Vol. 809 (2019) . - pp. 41-46.
DOI: https://doi.org/10.4028/www.scientific.net/KEM.809.41

Chudej, Kurt ; Albrecht, Gaby ; Wessely, Anja:
Theoretical analysis and numerical simulation of a mathematical two serotype model for dengue fever.
2019
Event: Workshop der GOR-Arbeitsgruppe Simulation und Optimierung komplexer Systeme , 19.-20.9.2019 , Oberammergau, Deutschland.
(Conference item: Workshop , Speech )

Borkner, Christian B. ; Lentz, Sarah ; Müller, Martin ; Fery, Andreas ; Scheibel, Thomas:
Ultrathin Spider Silk Films : Insights into Spider Silk Assembly on Surfaces.
In: ACS Applied Polymer Materials. Vol. 1 (2019) Issue 12 . - pp. 3366-3374.
DOI: https://doi.org/10.1021/acsapm.9b00792

Zha, R. Helen ; Delparastan, Peyman ; Fink, Tanner D. ; Bauer, Joschka ; Scheibel, Thomas ; Messersmith, Phillip B.:
Universal nanothin silk coatings via controlled spidroin self-assembly.
In: Biomaterials Science. Vol. 7 (2019) Issue 2 . - pp. 683-695.
DOI: https://doi.org/10.1039/C8BM01186A

Chudej, Kurt ; Albrecht, Gaby ; Jende, Lucas:
Vereinfachung eines Denguefieber-Modells mit zwei Serotypen und einer extrinsischen Inkubationszeit der Vektoren.
In: Wittmann, Jochen (ed.): Simulation in Umwelt- und Geowissenschaften : Workshop Kassel 2019. - Düren : Shaker Verlag, 2019 . - pp. 217-227 . - (ASIM Mitteilung ; 171 )

Knohl, Stefan ; Wamser, Thomas ; Martin, Bernd ; Krenkel, Walter:
Verfahren zur Herstellung eines Zwischenprodukts für die Fertigung eines faserverstärkten Bauteils, Vorrichtung zu dessen Durchführung, Verfahren zur Herstellung eines Bauteils sowie dessen Verwendung.
DE102017008180A1; EP 3450128A1 (2019)

Subramanian, Mahendran ; Songur, Noyan ; Adjei, Darrell ; Orlov, Pavel A. ; Faisal, A. Aldo:
A.Eye Drive : Gaze-based semi-autonomous wheelchair interface.
In: 41st Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC) : Proceedings. - Piscataway, NJ : IEEE, 2019 . - pp. 5967-5970
DOI: https://doi.org/10.1109/EMBC.2019.8856608

Schafföner, Stefan ; Bach, Miriam ; Jahn, Constantin ; Freitag, Lisa ; Aneziris, Christos G.:
Advanced refractories for titanium metallurgy based on calcium zirconate with improved thermomechanical properties.
In: Journal of the European Ceramic Society. Vol. 39 (2019) Issue 14 . - pp. 4394-4403.
DOI: https://doi.org/10.1016/j.jeurceramsoc.2019.06.007

Khwaja, Mohammed ; Ferrer, Miquel ; Iglesias, Jesus Omana ; Faisal, A. Aldo ; Matic, Aleksandar:
Aligning daily activities with personality : towards a recommender system for improving wellbeing.
In: Bogers, Toine ; Said, Alan (ed.): Proceedings of the 13th ACM Conference on Recommender Systems. - New York : Association for Computing Machinery, 2019 . - pp. 368-372
DOI: https://doi.org/10.1145/3298689.3347020

Wu, Guiyuan ; Yan, Wen ; Schafföner, Stefan ; Dai, Yajie ; Han, Bingqiang ; Li, Tianqing ; Ma, Sanbao ; Li, Nan ; Li, Guangqiang:
A comparative study on the microstructures and mechanical properties of a dense and a lightweight magnesia refractories.
In: Journal of Alloys and Compounds. Vol. 796 (2019) . - pp. 131-137.
DOI: https://doi.org/10.1016/j.jallcom.2019.05.064

Andreikiv, Oleksandr E. ; Shtayura, Nataliya:
Computational models of fatigue cracks growth in metallic materials under the action of force and physicochemical factors.
In: Materials Science. Vol. 54 (2019) . - pp. 465-476.
DOI: https://doi.org/10.1007/s11003-019-00206-1

Chen, Zhe ; Yan, Wen ; Dai, Yajie ; Schafföner, Stefan ; Han, Bingqiang ; Li, Nan:
Effect of microporous corundum aggregates on microstructure and mechanical properties of lightweight corundum refractories.
In: Ceramics International. Vol. 45 (2019) Issue 7, Part A . - pp. 8533-8538.
DOI: https://doi.org/10.1016/j.ceramint.2019.01.168

Lauerer, Michael:
Ethische Aspekte der Digitalisierung im Gesundheitswesen.
2019
Event: Kuratioriumssitzung der Katholischen Akademie für Berufe im Gesundheits- und Sozialwesen in Bayern , 11.01.2019 , Regensburg.
(Conference item: Conference , Speech )

Freitag, Lisa ; Aneziris, Christos G. ; Schafföner, Stefan ; Bulling, Florian ; Klotz, Ulrich E.:
Feingießen von Titanlegierungen mit Feingussformen aus Kalziumzirkonat.
In: Giesserei Praxis Science. Vol. 2019 (2019) . - pp. 8-13.

Shafti, Ali ; Orlov, Pavel ; Faisal, A. Aldo:
Gaze-based, Context-aware Robotic System for Assisted Reaching and Grasping.
In: 2019 International Conference on Robotics and Automation (ICRA). - Piscataway, NJ : IEEE, 2019 . - pp. 863-869
DOI: https://doi.org/10.1109/ICRA.2019.8793804

Gottesman, Omer ; Johansson, Fredrik ; Komorowski, Matthieu ; Faisal, A. Aldo ; Sontag, David ; Doshi-Velez, Finale ; Celi, Leo Anthony:
Guidelines for reinforcement learning in healthcare.
In: Nature Medicine. Vol. 25 (2019) Issue 1 . - pp. 16-18.
DOI: https://doi.org/10.1038/s41591-018-0310-5

Klotz, Ulrich E. ; Legner, C. ; Bulling, F. ; Freitag, L. ; Faßauer, C. ; Schafföner, Stefan ; Aneziris, C. G.:
Investment casting of titanium alloys with calcium zirconate moulds and crucibles.
In: The International Journal of Advanced Manufacturing Technology. Vol. 103 (2019) . - pp. 343-353.
DOI: https://doi.org/10.1007/s00170-019-03538-z

Haas, Sebastian ; Manzoni, Anna M. ; Krieg, Fabian ; Glatzel, Uwe:
Microstructure and Mechanical Properties of Precipitate Strengthened High Entropy Alloy Al₁₀Co₂₅Cr₈Fe₁₅Ni₃₆Ti₆ with Additions of Hafnium and Molybdenum.
In: Entropy. Vol. 21 (2019) Issue 2 . - 169.
DOI: https://doi.org/10.3390/e21020169

Rito Lima, Ines ; Haar, Shlomi ; Di Grassi, Lucas ; Faisal, A. Aldo:
Neurobehavioural signatures in race car driving.
bioRxiv , 2019
DOI: https://doi.org/10.1101/860056

Aigner, Tamara B. ; Scheibel, Thomas:
Self-Rolling Refillable Tubular Enzyme Containers Made of Recombinant Spider Silk and Chitosan.
In: ACS Applied Materials & Interfaces. Vol. 11 (2019) Issue 17 . - pp. 15290-15297.
DOI: https://doi.org/10.1021/acsami.9b01654

Lapusta, Yuri ; Andreikiv, Oleksandr ; Yadzhak, Nataliya:
Short crack problem in delayed fracture mechanics.
In: Procedia Structural Integrity. Vol. 16 (2019) . - pp. 105-112.
DOI: https://doi.org/10.1016/j.prostr.2019.07.028

Komorowski, Matthieu ; Celi, Leo A. ; Badawi, Omar ; Gordon, Anthony C. ; Faisal, A. Aldo:
Understanding the artificial intelligence clinician and optimal treatment strategies for sepsis in intensive care.
arXiv , 2019
DOI: https://doi.org/10.48550/arXiv.1903.02345

Leutheuser, Heike:
Wearable computing applications in eHealth.
Erlangen : FAU University Press , 2019 . - xvi, 235 p. - (FAU Studien aus der Informatik ; 9 )

DOI: https://doi.org/10.25593/978-3-96147-261-1

2018

Fechner, Pascal:
Analyse und Numerische Simulation eines Chikungunyafieber Modells.
Bayreuth , 2018
( Bachelor thesis, 2018 , Universität Bayreuth; Fakultät für Mathematik, Physik und Informatik, Lehrstuhl für Wissenschaftliches Rechnen; Fakultät für Ingenieurwissenschaften, Lehrstuhl für Bioprozesstechnik)

Kühlmann, Torsten M. ; Sänn, Alexander ; Kettl, Julian ; Hofmann, Anni ; Schweizer, Elisabeth ; Eimecke, Jörgen ; Lutz, Saskia ; Pflügner, Katharina ; Becker, Julia:
BF/M-Spiegel : Journal des Betriebswirtschaftlichen Forschungszentrums für Fragen der mittelständischen Wirtschaft e. V. an der Universität Bayreuth, 2018, Ausgabe 2.
BF/M-Spiegel. (2018) Issue 2 . - 47 p.
DOI: https://doi.org/10.15495/EPub_UBT_00004596

Schörner, Mario:
The stability of gravity-driven viscous films over topography.
Bayreuth , 2018 . - 124 p.
( Doctoral thesis, 2018 , Universität Bayreuth, Fakultät für Ingenieurwissenschaften)

Pfetscher, André ; Hänle, Christian ; Völkle, Dietmar ; Neumeyer, Thomas ; Bakis, Gökhan ; Altstädt, Volker:
Harzzusammensetzung, Prepregmaterial und Verfahren zur Herstellung einer Harzzusammensetzung = Resin composition, prepreg material, composite component and method for producing the component and a resin composition.
DE102017009661 (2018)

Chudej, Kurt ; Fischer, Anne ; Albrecht, Gaby:
Optimal Control in a Mathematical Dengue Fever Model.
2018
Event: 14th Viennese Conference Optimal Control and Dynamic Games , 3.-6.7.2018 , Wien, Österreich.
(Conference item: Conference , Speech )

Neumeyer, Thomas ; Altstädt, Volker ; Kropka, Michael ; Knöchel, Johannes:
Resistance of 3D printed polymer structures against fatigue crack growth.
In: Silva Gomes, J. F. ; Meguid, Shaker A. ; Instituto de Ciência e Inovação em Engenharia Mecânica e Gestão Industrial (ed.): IRF2018 : proceedings of the 6th International Conference on Integrity-Reliability-Failure. - Porto : FEUP-INEGI, 2018 . - pp. 949-950

Gensel, Julia ; Hager, L. ; Helmlinger, Lars ; Weinbrenner, M. ; Zhu, Yejun ; Neumeyer, Thomas ; Strube, Franziska ; Thäter, Stefan ; Rosemann, Bernd ; Altstädt, Volker:
CO2 Capture / Utilization Materials.
2018
Event: Material Experience (MatX 2018) , 27.-28.06.2018 , Nürnberg.
(Conference item: Conference , Poster )

Faghih-Naini, Sara ; Aizinger, Vadym:
A Quadrature-free Discontinuous Galerkin Method for the Shallow Water Equations.
2018
Event: 16th European Finite Element Fair (EFEF 2018) , June 8-9, 2018 , Heidelberg.
(Conference item: Conference , Speech )

Fischer, Anne ; Albrecht, Gaby ; Herath, Mark ; Chudej, Kurt:
Optimale Mückenbekämpfung bei einem neuen mathematischen Dengue-Fieber Modell mit zwei Serotypen.
2018
Event: Workshop Simulation in den Umwelt- und Geowissenschaften , 11.-13.04.2018 , Hannover, Deutschland.
(Conference item: Workshop , Speech )

Faghih-Naini, Sara ; Shen, Bo-Wen:
High-dimensional Lorenz Modeling in Python : Chaotic, Limit Cycle and Quasi-Periodic Solutions.
2018
Event: 98th American Meteorological Society Annual Meeting; Eighth Symposium on Advances in Modeling and Analysis Using Python , 2018 June 06-08 , Austin, USA.
(Conference item: Conference , Speech )

Krenkel, Walter ; Puchas, Georg:
All-Oxide Composites with Continous and Chopped Fiber Reinforcement.
2018
Event: 6th International Symposium on Advanced Ceramics (ISAC-6) , March 12-14, 2018 , Tohoku University, Japan.
(Conference item: Conference , Speech )

Lintz, Eileen S. ; Neinhuis, Christoph ; Scheibel, Thomas:
Altering Silk Film Surface Properties through Lotus-Like Mechanisms.
In: Macromolecular Materials and Engineering. Vol. 303 (2018) Issue 4 . - 1700637.
DOI: https://doi.org/10.1002/mame.201700637

Albrecht, Gaby ; Fischer, Anne ; Chudej, Kurt:
Analyse, Simulation und Optimale Steuerung eines mathematischen Dengue-Fieber Modells mit Impfung.
In: Loose, Tobias ; Arbeitsgemeinschaft Simulation ASIM (ed.): Tagungsband Workshop 2018 ASIM/GI Fachgruppen : 8. und 9. März an der Hochschule Heilbronn. - Wien : ARGESIM, 2018 . - pp. 223-229 . - (ARGESIM Report ; 54 )

Helmlinger, Lars ; Zhu, Yejun ; Gensel, Julia ; Neumeyer, Thomas ; Thäter, Stefan ; Strube, Franziska ; Bauer, Christoph ; Rosemann, Bernd ; Altstädt, Volker:
Application of Amine-Functionalized Cellulose Foam for CO2 Capture and Storage in the Brewing Industry.
In: Journal of Renewable Materials. Vol. 6 (2018) Issue 3 . - pp. 219-225.
DOI: https://doi.org/10.7569/JRM.2017.634161

Kühlmann, Torsten M. ; Sänn, Alexander ; Heinz, Ramona ; Kettl, Julian ; Hofmann, Anni ; Schweizer, Elisabeth ; Eimecke, Jörgen ; Lutz, Saskia ; Pflügner, Katharina ; Becker, Julia:
BF/M-Spiegel: Journal des Betriebswirtschaftlichen Forschungszentrums für Fragen der mittelständischen Wirtschaft e. V. an der Universität Bayreuth, 2018, Ausgabe 1.
BF/M-Spiegel. (2018) Issue 1 . - 35 p.
DOI: https://doi.org/10.15495/EPub_UBT_00003727

Bargel, Hendrik ; Scheibel, Thomas:
Bioinspirierte Materialien : Aktuelle Trends in der Entwicklung.
In: MNU Journal. Vol. 71 (2018) Issue 01 . - pp. 4-10.

Aigner, Tamara B. ; DeSimone, Elise ; Scheibel, Thomas:
Biomedical Applications of Recombinant Silk-Based Materials.
In: Advanced Materials. Vol. 30 (2018) Issue 19 . - 1704636.
DOI: https://doi.org/10.1002/adma.201704636

Salehi, Sahar ; Scheibel, Thomas:
Biomimetic spider silk fibres : from vision to reality.
In: The Biochemist. Vol. 40 (2018) Issue 1 . - pp. 4-7.
DOI: https://doi.org/10.1042/BIO04001004

Rosemann, Bernd ; Binkert, Jörg ; Altstädt, Volker ; Maderer, Karl-Heinz:
Capture and Storage of Carbon Dioxide (CaSCaDe).
Bamberg 2018 . - 57 p.

Krenkel, Walter:
Ceramics Matrix Composites : Status und Perspectives.
2018
Event: Workshop bei ALD Vacuum Technologies GmbH , 25.05.2018 , Hanau.
(Conference item: Workshop , Speech )

Spatz, Carolin ; Langhof, Nico ; Schmidt, Jens ; Krenkel, Walter:
CMC jackets for metallic pipes : a novel approach to prevent the creep deformation of thermo-mechanically loaded metals.
In: Journal of the European Ceramic Society. Vol. 38 (2018) Issue 8 . - pp. 2954-2960.
DOI: https://doi.org/10.1016/j.jeurceramsoc.2018.01.018

Freiberger, Stefan ; Rosemann, Bernd:
CNC-Produktion.
In: Rieg, Frank ; Steinhilper, Rolf (ed.): Handbuch Konstruktion. 2., aktualisierte Auflage. - München : Hanser, 2018 . - pp. 961-973

Chen, Baizhu ; Synatschke, Christopher V. ; Jérôme, Valérie ; Müller, Axel H. E. ; Freitag, Ruth ; Wu, Chi:
Co-transfection of star-shaped PDMAEMAs enhance transfection efficiency of protamine/pDNA complexes in the presence of serum.
In: European Polymer Journal. Vol. 103 (2018) . - pp. 362-369.
DOI: https://doi.org/10.1016/j.eurpolymj.2018.04.022

Wang, Jia ; Scheibel, Thomas:
Coacervation of the Recombinant Mytilus galloprovincialis Foot Protein-3b.
In: Biomacromolecules. Vol. 19 (2018) Issue 9 . - pp. 3612-3619.
DOI: https://doi.org/10.1021/acs.biomac.8b00583

Krenkel, Walter ; Reichert, Florian:
Design Objectives and Design Philosophies, Interphases and Interfaces in Fiber-Reinforced CMCs.
In: Comprehensive Composite Materials II. Vol. 5. Ceramic and carbon matrix composites. - Amsterdam : Elsevier, 2018 . - pp. 1-18
DOI: https://doi.org/10.1016/B978-0-12-803581-8.09986-0

Wu, Xiaojun ; Langhof, Nico ; Krenkel, Walter ; Habath, Rebecca ; Lenz, Franziska:
Effect of pyrolysis temperature on the microstructure and capillary infiltration behavior of carbon/carbon composites.
In: Ceramics International. Vol. 44 (2018) Issue 14 . - pp. 16325-16332.
DOI: https://doi.org/10.1016/j.ceramint.2018.06.034

Hoffmeister, Torben ; Schwenke, Dirk ; Krug, Oliver ; Wachsmuth, Nadine ; Geyer, Hans ; Thevis, Mario ; Byrnes, William C. ; Schmidt, Walter:
Effects of 3 Weeks of Oral Low-Dose Cobalt on Hemoglobin Mass and Aerobic Performance.
In: Frontiers in Physiology. Vol. 9 (2018) . - 1289.
DOI: https://doi.org/10.3389/fphys.2018.01289

Weithmann, Nicolas:
Einfluss von Stressfaktoren auf die Etablierung der prokaryotischen Gemeinschaft und den Metabolismus in biotechnischen, anaeroben Prozessen.
Bayreuth , 2018 . - I-XVII, 132, XVII-LXXIV p.
( Doctoral thesis, 2018 , Universität Bayreuth, Bayreuther Graduiertenschule für Mathematik und Naturwissenschaften - BayNAT)
DOI: https://doi.org/10.15495/EPub_UBT_00004222

Roshanbinfar, Kaveh ; Vogt, Lena ; Greber, Boris ; Diecke, Sebastian ; Boccaccini, Aldo R. ; Engel, Felix B. ; Scheibel, Thomas:
Electroconductive Biohybrid Hydrogel for Enhanced Maturation and Beating Properties of Engineered Cardiac Tissues.
In: Advanced Functional Materials. Vol. 28 (2018) Issue 42 . - 1803951.
DOI: https://doi.org/10.1002/adfm.201803951

Lucke, Matthias ; Mottas, Inès ; Herbst, Tina ; Hotz, Christian ; Römer, Lin ; Schierling, Martina ; Herold, Heike M. ; Slotta, Ute ; Spinetti, Thibaud ; Scheibel, Thomas ; Winter, Gerhard ; Bourquin, Carole ; Engert, Julia:
Engineered hybrid spider silk particles as delivery system for peptide vaccines.
In: Biomaterials. Vol. 172 (2018) . - pp. 105-115.
DOI: https://doi.org/10.1016/j.biomaterials.2018.04.008

Haas, Sebastian ; Mosbacher, Mike ; Senkov, Oleg N. ; Feuerbacher, Michael ; Freudenberger, Jens ; Gezgin, Senol ; Völkl, Rainer ; Glatzel, Uwe:
Entropy Determination of Single-Phase High Entropy Alloys with Different Crystal Structures over a Wide Temperature Range.
In: Entropy. Vol. 20 (2018) Issue 9 . - 654.
DOI: https://doi.org/10.3390/e20090654

Munz, Oliver ; Schwitzke, Corina ; Welzenbach, Sarah ; Fischer, Tim ; Ulan kyzy, Sonun ; Bauer, Hans-Jörg:
Experimentelle Untersuchung von Anstreifvorgängen in Turbomaschinen.
In: Ideen und Innovationen für die Energie von morgen : Wissenschaftliche Beiträge des KIT zu den Jahrestagungen 2014, 2016 und 2017 des KIT-Zentrums Energie. - Karlsruhe : KIT Scientific Publishing, 2018 . - pp. 101-105
DOI: https://doi.org/10.5445/IR/1000085344

Hardy, John G. ; Bertin, Annabelle ; Torres-Rendon, Jose Guillermo ; Leal-Egaña, Aldo ; Humenik, Martin ; Bauer, Felix ; Walther, Andreas ; Cölfen, Helmut ; Schlaad, Helmut ; Scheibel, Thomas:
Facile Photochemical Modification of Silk Protein–Based Biomaterials.
In: Macromolecular Bioscience. Vol. 18 (2018) Issue 11 . - 1800216.
DOI: https://doi.org/10.1002/mabi.201800216

Bard, Simon ; Demleitner, Martin ; Häublein, Markus ; Altstädt, Volker:
Fracture behaviour of prepreg laminates studied by in-situ SEM mechanical tests.
In: Procedia Structural Integrity. Vol. 13 (2018) . - pp. 1442-1446.
DOI: https://doi.org/10.1016/j.prostr.2018.12.299

Rinsche, Florian:
How to Measure Market Power in Hospital Markets : a review of methods used in the industrial organization literature.
In: Birg, Laura ; Schmid, Andreas ; Rinsche, Florian (ed.): Topics in Health Economics and Management : Abstracts of the 13th DIBOGS- Workshop, Hamburg 2017. - Bayreuth , 2018 . - pp. 15-16 . - (DIBOGS-Beiträge zur Gesundheitsökonomik und Sozialpolitik ; 12 )

Mickoleit, Frank ; Borkner, Christian B. ; Toro-Nahuelpan, Mauricio ; Herold, Heike M. ; Maier, Denis S. ; Plitzko, Jürgen M. ; Scheibel, Thomas ; Schüler, Dirk:
In Vivo Coating of Bacterial Magnetic Nanoparticles by Magnetosome Expression of Spider Silk-Inspired Peptides.
In: Biomacromolecules. Vol. 19 (2018) Issue 3 . - pp. 962-972.
DOI: https://doi.org/10.1021/acs.biomac.7b01749

Prommer, Nicole ; Wachsmuth, Nadine ; Thieme, Ina ; Wachsmuth, Christian ; Mancera-Soto, Erica ; Hohmann, Andreas ; Schmidt, Walter:
Influence of Endurance Training During Childhood on Total Hemoglobin Mass.
In: Frontiers in Physiology. Vol. 9 (2018) . - 251.
DOI: https://doi.org/10.3389/fphys.2018.00251

Kellner, Peter M. ; Völkl, Rainer ; Glatzel, Uwe:
Influence of Ingot and Powder Metallurgy Production Route on the Tensile Creep Behavior of Mo–9Si–8B Alloys with Additions of Al and Ge.
In: Advanced Engineering Materials. Vol. 20 (2018) Issue 1 . - 1700751.
DOI: https://doi.org/10.1002/adem.201700751

Gabriel, Tobias ; Scherm, Florian ; Gorywoda, Marek ; Glatzel, Uwe:
Influence of Laser Power and Scanning Velocity in One- and Two-Step Laser Cladding on Ultra-Thin Substrates.
2018
Event: Conference on Lasers and Electro-Optics CLEO, Optical Society of America (2018) , 13.-18. Mai 2018 , San Jose, Calif., United States.
(Conference item: Conference , Speech )
DOI: https://doi.org/10.1364/CLEO_AT.2018.AM1M.7

Bargel, Hendrik ; Scheibel, Thomas:
Inspirationen für mechanisch stabile Materialien aus der Natur : Von Gräsern über Spinnenseide bis zu Kieselalgen.
In: MNU Journal. Vol. 71 (2018) Issue 01 . - pp. 37-44.

Hajduk, Hennes ; Hodges, Ben R. ; Aizinger, Vadym ; Reuter, Balthasar:
Locally Filtered Transport for computational efficiency in multi-component advection-reaction models.
In: Environmental Modelling & Software. Vol. 102 (2018) . - pp. 185-198.
DOI: https://doi.org/10.1016/j.envsoft.2018.01.003

Klier, Anne:
Mathematische Analyse eines Dengue-Fieber-Modells.
Bayreuth , 2018
( Bachelor thesis, 2018 , Universität Bayreuth, Fakultät für Mathematik, Physik und Informatik, Lehrstuhl für Wissenschaftliches Rechnen)

Klein, Melanie ; Finsterwald, Leonhard ; Tonhäuser, Kathrin ; Steinhilper, Rolf:
Measurement Analysis for Increasing Resource Efficiency during Autoclave Processes for the Production of Fiber Composites.
In: Applied Mechanics and Materials. Vol. 882 (2018) . - pp. 154-161.
DOI: https://doi.org/10.4028/www.scientific.net/AMM.882.154

Fathi, Amir:
Mechanical Properties of Strand PET Foams at Different Length Scales.
Bayreuth , 2018 . - 158 p.
( Doctoral thesis, 2018 , Universität Bayreuth, Fakultät für Ingenieurwissenschaften)
DOI: https://doi.org/10.15495/EPub_UBT_00004286

Hofmann, Eddie ; Krüger, Kilian ; Haynl, Christian ; Scheibel, Thomas ; Trebbin, Martin ; Förster, Stephan:
Microfluidic nozzle device for ultrafine fiber solution blow spinning with precise diameter control.
In: Lab on a Chip. Vol. 18 (2018) Issue 15 . - pp. 2225-2234.
DOI: https://doi.org/10.1039/c8lc00304a

Mora-García, Alma G. ; Ruíz-Luna, Haidee ; Mosbacher, Mike ; Popp, Robert ; Schulz, Uwe ; Glatzel, Uwe ; Muñoz-Saldaña, Juan:
Microstructural analysis of Ta-containing NiCoCrAlY bond coats deposited by HVOF on different Ni-based superalloys.
In: Surface and Coatings Technology. Vol. 354 (2018) . - pp. 214-225.
DOI: https://doi.org/10.1016/j.surfcoat.2018.09.025

Krenkel, Walter ; Reichert, Florian:
Microstructure : Property Relationships of Thermoplastic Polymer-Derived C/C-SiC Composites.
2018
Event: Sino-German Symposium , April, 14-20, 2018 , Xian, China.
(Conference item: Workshop , Speech )

Rosemann, Bernd:
Mit Hightech im Umweltschutz fit fürs Studium : Ingenieure fördern Nachwuchs in Junior-Ingenieur-Akademie.
In: UBT aktuell. (2018) Issue 1 . - p. 41.

Review:

Brigitte Kohlberg

Kienle Garrido, Melina-Lorén ; Breitenbach, Tim ; Chudej, Kurt ; Borzì, Alfio:
Modeling and Numerical Solution of a Cancer Therapy Optimal Control Problem.
In: Applied Mathematics. Vol. 9 (2018) Issue 8 . - pp. 985-1004.
DOI: https://doi.org/10.4236/am.2018.98067

Fischer, Tim ; Welzenbach, Sarah ; Meier, Felix ; Werner, Ewald ; Ulan kyzy, Sonun ; Munz, Oliver:
Modeling the rubbing contact in honeycomb seals.
In: Continuum Mechanics and Thermodynamics. Vol. 30 (2018) Issue 2 . - pp. 381-395.
DOI: https://doi.org/10.1007/s00161-017-0608-4

Munz, Oliver ; Schwitzke, Corina ; Bauer, Hans-Jörg ; Welzenbach, Sarah ; Fischer, Tim ; Ulan kyzy, Sonun:
Modelling the Rubbing Process in Labyrinth Seals.
In: Global Power and Propulsion Society (GPPS) (ed.): Proceedings of GPPS Forum 18. - Zug , 2018

Haug, M. ; Reischl, B. ; Prölß, G. ; Pollmann, C. ; Buckert, T. ; Keidel, C. ; Schürmann, S. ; Hock, M. ; Rupitsch, S. ; Heckel, Michael ; Pöschel, Thorsten ; Scheibel, Thomas ; Haynl, Christian ; Kiriaev, L. ; Head, Sl ; Friedrich, Oliver:
The MyoRobot : A novel automated biomechatronics System to assess voltage/Ca²⁺ biosensors and active/passive biomechanics in muscle and biomaterials.
In: Biosensors and Bioelectronics. Vol. 102 (2018) . - pp. 589-599.
DOI: https://doi.org/10.1016/j.bios.2017.12.003

Krenkel, Walter:
Möglichkeiten und Grenzen der keramischen Faserverbundwerkstoffe.
2018
Event: Workshop bei H.C. Starck , 6. März 2018 , Selb, Deutschland.
(Conference item: Workshop , Speech )

Puchas, Georg ; Krenkel, Walter:
Neuartige Herstellungsverfahren für oxidkeramische Faserverbundwerkstoffe.
In: dIALOG : Materialwissenschaft und Werkstofftechnik. (2018) Issue 1 . - pp. 34-41.

Krenkel, Walter ; Langhof, Nico:
New Approaches for the Manufacture of C/C-SiC Composite Materials.
2018
Event: CIMTEC 2018 , 4.6.-8.6.2018 , Perugia, Italy.
(Conference item: Conference , Speech )

Riedl, Simon ; Kaiser, Patrick ; Raup, Alexander ; Synatschke, Christopher V. ; Jérôme, Valérie ; Freitag, Ruth:
Non-Viral Transfection of Human T Lymphocytes.
In: Processes. Vol. 6 (2018) Issue 10 . - 188.
DOI: https://doi.org/10.3390/pr6100188

Krenkel, Walter:
Novel Approaches to a Cost-Effective Fabrication of C/SiC Composites.
2018
Event: International Conference on Advances in Composite Science and Technologies , 6.12.2018 , Moskau, Russland.
(Conference item: Conference , Speech )

Schlordt, Tobias ; Puchas, Georg ; Scheler, Sven ; Martin, Bernd ; Krenkel, Walter:
Novel Oxide Fibre Composites (OFC) with Porous Matrices.
In: Ceramic Forum International. (2018) . - pp. 149-152.

Schreppel, Christina ; Chudej, Kurt:
Numerical optimal control applied to an epidemiological model.
In: IFAC-PapersOnLine. Vol. 51 (2018) Issue 2 . - pp. 1-6.
DOI: https://doi.org/10.1016/j.ifacol.2018.03.001

Rosemann, Bernd:
Oberflächenfeinbearbeitung auf CNC-Bearbeitungszentren.
In: wt Werkstattstechnik online. Vol. 108 (2018) Issue 6 . - pp. 454-459.

Chudej, Kurt ; Fischer, Anne:
Optimal vaccination strategies for a new dengue model with two serotypes.
In: IFAC-PapersOnLine. Vol. 51 (2018) Issue 2 . - pp. 13-18.
DOI: https://doi.org/10.1016/j.ifacol.2018.03.003

Chudej, Kurt ; Fischer, Anne ; Albrecht, Gaby ; Herath, Mark:
Optimale Mückenbekämpfung bei einem neuen mathematischen Dengue-Fieber Modell mit 2 Serotypen.
In: Wittmann, Jochen ; Wolf, Lennard ; Ahlers, Volker ; Koschel, Arne ; Pump, Richard (ed.): Simulation in Umwelt- und Geowissenschaften : Workshop Hannover 2018. - Aachen : Shaker Verlag, 2018 . - pp. 221-233 . - (ASIM Mitteilung ; 167 )

Albrecht, Gaby ; Chudej, Kurt:
Optimale Steuerung und theoretische Analyse eines mathematischen zwei Serotypen Dengue-Fieber Modells.
In: Deatcu, Christina ; Schramm, Thomas ; Kay, Zobel (ed.): Tagungsband ASIM 2018 - 24. Symposium Simulationstechnik an der HafenCity Universität Hamburg. - Wien : ARGESIM, 2018 . - pp. 127-135 . - (ASIM Mitteilung ; 168 )

Trosch, Tanja ; Lalire, Fanny ; Pommier, Stéphane ; Völkl, Rainer ; Glatzel, Uwe:
Optimization of a jewellery platinum alloy for precision casting : Evaluation of mechanical, microstructural and optical properties.
In: Johnson Matthey Technology Review. Vol. 62 (2018) Issue 4 . - pp. 364-382.
DOI: https://doi.org/10.1595/205651318X696837

Ulrich, Anke Silvia ; Laska, N. ; Straubel, A. ; Leyens, C. ; Braun, R. ; Galetz, Mathias C. ; Schütze, M.:
The oxidation behaviour of aluminium-rich coatings on the TiAl alloy TNM-B1.
In: Materials at High Temperatures. Vol. 35 (2018) Issue 1-3 . - pp. 204-216.
DOI: https://doi.org/10.1080/09603409.2017.1389097

Mosbacher, Mike ; Scherm, Florian ; Glatzel, Uwe:
Oxygen diffusion kinetics of an advanced three step heat treatment for zirconium alloy ZrNb7.
In: Surface and Coatings Technology. Vol. 339 (2018) . - pp. 139-146.
DOI: https://doi.org/10.1016/j.surfcoat.2018.02.015

Tirunilai, Aditya Srinivasan ; Sas, Jan ; Weiss, Klaus-Peter ; Chen, Hans ; Vinga Szabó, Dorothée ; Schlabach, Sabine ; Haas, Sebastian ; Geissler, David ; Freudenberger, Jens ; Heilmaier, Martin ; Kauffmann, Alexander:
Peculiarities of deformation of CoCrFeMnNi at cryogenic temperatures.
In: Journal of Materials Research. Vol. 33 (2018) Issue 19 . - pp. 3287-3300.
DOI: https://doi.org/10.1557/jmr.2018.252

Krenkel, Walter ; Barroso, Gilvan S. ; Motz, Günter:
Polymer-Derived Ceramic Coatings for Metallic Substrates.
2018
Event: 42nd International Conference and Exposition on Advanced Ceramics and Composites (ICACC) , January 21st-26th, 2018 , Daytona Beach, Florida, USA.
(Conference item: Conference , Speech )

Kellner, Peter M. ; Dijkstra, Hans ; Glatzel, Uwe:
Quantitative analysis of Mo–Si–B alloy phases with wavelength dispersive spectroscopy (WDS–SEM).
In: X-Ray Spectrometry. Vol. 47 (2018) Issue 2 . - pp. 153-158.
DOI: https://doi.org/10.1002/xrs.2824

Faghih-Naini, Sara ; Shen, Bo-Wen:
Quasi-Periodic Orbits in the Five-Dimensional Nondissipative Lorenz Model : the Role of the Extended Nonlinear Feedback Loop.
In: International Journal of Bifurcation and Chaos. Vol. 28 (2018) Issue 6 . - 1850072.
DOI: https://doi.org/10.1142/S0218127418500724

Anke, Marie-Luise ; Hämmerle, Martin ; Jess, Andreas ; Moos, Ralf:
Radio frequency- and impedance-based sensing of ionic liquids supported on porous carriers and their limitations.
In: Sensors and Actuators B: Chemical. Vol. 273 (2018) . - pp. 1564-1571.
DOI: https://doi.org/10.1016/j.snb.2018.07.036

Wang, Jja ; Scheibel, Thomas:
Recombinant Production of Mussel Byssus Inspired Proteins.
In: Biotechnology Journal. Vol. 13 (2018) Issue 12 . - 1800146.
DOI: https://doi.org/10.1002/biot.201800146

Kumari, Sushma ; Bargel, Hendrik ; Anby, Mette U. ; Lafargue, David ; Scheibel, Thomas:
Recombinant spider silk hydrogels for sustained release of biologicals.
In: ACS Biomaterials Science & Engineering. Vol. 4 (2018) Issue 5 . - pp. 1750-1759.
DOI: https://doi.org/10.1021/acsbiomaterials.8b00382

Rosemann, Bernd ; Mörtl, Markus ; Crone, Joachim:
Recyclinggerechtes Konstruieren.
In: Rieg, Frank ; Steinhilper, Rolf (ed.): Handbuch Konstruktion. 2., aktualisierte Auflage. - München : Hanser, 2018 . - pp. 519-548

Bremmers, Harry ; Purnhagen, Kai:
Regulating and Managing Food Safety in the EU : A Legal-Economic Perspective.
In: Bremmers, Harry ; Purnhagen, Kai (ed.): Regulating and Managing Food Safety in the EU. - Cham : Springer, 2018 . - pp. 1-9 . - (Economic Analysis of Law in European Legal Scholarship ; 6 )
DOI: https://doi.org/10.1007/978-3-319-77045-1_1

Rosemann, Bernd ; Freiberger, Stefan:
Reverse Engineering.
In: Rieg, Frank ; Steinhilper, Rolf (ed.): Handbuch Konstruktion. 2., aktualisierte Auflage. - München : Hanser, 2018 . - pp. 895-908

Raps, Daniel ; Goodarzi Hosseinabadi, Hossein ; Heymann, Lutz ; Köppl, Thomas ; Altstädt, Volker:
Rheological Properties of Thermoplastic Polymers with Dissolved Gases for Foaming Applications.
arXiv , 2018 . - 21 p.

Golser, Adrian V. ; Scheibel, Thomas:
Routes towards Novel Collagen-Like Biomaterials.
In: Fibers. Vol. 6 (2018) Issue 2 . - No. 21.
DOI: https://doi.org/10.3390/fib6020021

Kaiser, Patrick ; Werner, Melanie ; Jérôme, Valérie ; Freitag, Ruth:
Scale‐up of the ex vivo expansion of encapsulated primary human T lymphocytes.
In: Biotechnology and Bioengineering. Vol. 115 (2018) Issue 10 . - pp. 2632-2642.
DOI: https://doi.org/10.1002/bit.26786

Humenik, Martin ; Mohrand, Madeleine ; Scheibel, Thomas:
Self-Assembly of Spider Silk-Fusion Proteins Comprising Enzymatic and Fluorescence Activity.
In: Bioconjugate Chemistry. Vol. 29 (2018) Issue 4 . - pp. 898-904.
DOI: https://doi.org/10.1021/acs.bioconjchem.7b00759

Humenik, Martin ; Lang, Gregor ; Scheibel, Thomas:
Silk nanofibril self-assembly versus electrospinning.
In: WIREs Nanomedicine and Nanobiotechnology. Vol. 10 (2018) Issue 4 . - e1509.
DOI: https://doi.org/10.1002/wnan.1509

Rosemann, Bernd:
Spanende Fertigung.
In: Rieg, Frank ; Steinhilper, Rolf (ed.): Handbuch Konstruktion. 2., aktualisierte Auflage. - München : Hanser, 2018 . - pp. 1089-1137

Ulrich, Anke Silvia ; Pfizenmaier, Petra ; Solimani, Ali ; Glatzel, Uwe ; Galetz, Mathias:
Strengthened Cr-Si-base alloys for high temperature applications.
In: International Journal of Refractory Metals and Hard Materials. Vol. 76 (2018) . - pp. 72-81.
DOI: https://doi.org/10.1016/j.ijrmhm.2018.05.016

Welzenbach, Sarah ; Fischer, Tim ; Meier, Felix ; Werner, Ewald ; Ulan kyzy, Sonun ; Munz, Oliver:
Temperature distribution of a simplified rotor due to a uniform heat source.
In: Continuum Mechanics and Thermodynamics. Vol. 30 (2018) Issue 2 . - pp. 279-290.
DOI: https://doi.org/10.1007/s00161-017-0600-z

Manzoni, Anna M. ; Haas, Sebastian ; Daoud, Haneen ; Glatzel, Uwe ; Förster, Christiane ; Wanderka, Nelia:
Tensile Behavior and Evolution of the Phases in the Al₁₀Co₂₅Cr₈Fe₁₅Ni₃₆Ti₆ Compositionally Complex/High Entropy Alloy.
In: Entropy. Vol. 20 (2018) Issue 9 . - 646.
DOI: https://doi.org/10.3390/e20090646

Neumeyer, Thomas ; Schreier, Peter ; Knöchel, Johannes ; Mühlbacher, Mathias ; Altstädt, Volker ; Keller, Thomas ; Yanes Armas, Sonia ; Carlsson, Leif A. ; Frostig, Yeoshua:
Thermoplastic Sandwich Structures with Bead Foam Core : Novel Processing Approaches.
In: Keller, Thomas ; Yanes Armas, Sonia ; Carlsson, Leif A. ; Frostig, Yeoshua (ed.): 12th International Conference on Sandwich Structures ICSS-12 : Proceedings. - Lausanne : EPFL - CCLab Composite Construction Laboratory, 2018 . - pp. 161-163
DOI: https://doi.org/10.5075/epfl-ICSS12-2018-161-163

Stemmer, Corina:
Trajektorienoptimierung eines Hängegleiters.
Bayreuth , 2018
(Master's, 2018 , Universität Bayreuth, Fakultät für Mathematik, Physik und Informatik, Lehrstuhl Wissenschaftliches Rechnen)

Mader, Michael ; Jérôme, Valérie ; Freitag, Ruth ; Agarwal, Seema ; Greiner, Andreas:
Ultraporous, compressible, wettable polylactide/polycaprolactone sponges for tissue engineering.
In: Biomacromolecules. Vol. 19 (2018) Issue 5 . - pp. 1663-1673.
DOI: https://doi.org/10.1021/acs.biomac.8b00434

Li, Luchen ; Komorowski, Matthieu ; Faisal, A. Aldo:
The Actor Search Tree Critic (ASTC) for Off-Policy POMDP Learning in Medical Decision Making.
arXiv , 2018
DOI: https://doi.org/10.48550/arXiv.1805.11548

Komorowski, Matthieu ; Celi, Leo A. ; Badawi, Omar ; Gordon, Anthony C. ; Faisal, A. Aldo:
The Artificial Intelligence Clinician learns optimal treatment strategies for sepsis in intensive care.
In: Nature Medicine. Vol. 24 (2018) Issue 11 . - pp. 1716-1720.
DOI: https://doi.org/10.1038/s41591-018-0213-5

Ortega, Pablo ; Colas, Cédric ; Faisal, A. Aldo:
Compact Convolutional Neural Networks for Multi-Class, Personalised, Closed-Loop EEG-BCI.
In: High tech human touch : 7th IEEE International Conference on Biomedical Robotics and Biomechatronics (Biorob). - Piscataway, NJ : IEEE, 2018 . - pp. 136-141
DOI: https://doi.org/10.1109/BIOROB.2018.8487644

Ortega, Pablo ; Colas, Cédric ; Faisal, A. Aldo:
Convolutional neural network, personalised, closed-loop Brain-Computer Interfaces for multi-way control mode switching in real-time.
bioRxiv , 2018
DOI: https://doi.org/10.1101/256701

Schafföner, Stefan ; Fruhstorfer, Jens ; Ludwig, Susann ; Aneziris, Christos G.:
Cyclic cold isostatic pressing and improved particle packing of coarse grained oxide ceramics for refractory applications.
In: Ceramics International. Vol. 44 (2018) Issue 8 . - pp. 9027-9036.
DOI: https://doi.org/10.1016/j.ceramint.2018.02.106

Ponferrada, Eduardo G. ; Sylaidi, Anastasia ; Faisal, A. Aldo:
Data-efficient Motor Imagery Decoding in Real-time for the Cybathlon Brain-Computer Interface Race.
In: NEUROTECHNIX 2018 : Proceedings of the 6th International Congress on Neurotechnology, Electronics and Informatics. - Setúbal : SCITEPRESS, 2018 . - pp. 21-32
DOI: https://doi.org/10.5220/0006962400210032

Lin, Chin-Hsuan ; Faisal, A. Aldo:
Decomposing sensorimotor variability changes in ageing and their connection to falls in older people.
In: Scientific Reports. Vol. 8 (2018) Issue 1 . - 14546.
DOI: https://doi.org/10.1038/s41598-018-32648-z

Yan, Wen ; Wu, Guiyuan ; Ma, Sanbao ; Schafföner, Stefan ; Dai, Yajie ; Chen, Zhe ; Qi, Jiangtao ; Li, Nan:
Energy efficient lightweight periclase-magnesium alumina spinel castables containing porous aggregates for the working lining of steel ladles.
In: Journal of the European Ceramic Society. Vol. 38 (2018) Issue 12 . - pp. 4276-4282.
DOI: https://doi.org/10.1016/j.jeurceramsoc.2018.05.002

Golser, Adrian V. ; Röber, Matthias ; Börner, Hans G. ; Scheibel, Thomas:
Engineered Collagen : A Redox Switchable Framework for Tunable Assembly and Fabrication of Biocompatible Surfaces.
In: ACS Biomaterials Science & Engineering. Vol. 4 (2018) Issue 6 . - pp. 2106-2114.
DOI: https://doi.org/10.1021/acsbiomaterials.7b00583

Andreikiv, Oleksandr E. ; Lysyk, Adriana R. ; Shtayura, Nataliya ; Babii, Andrii V.:
Evaluation of the residual service life of thin-walled structural elements with short corrosion-fatigue cracks.
In: Materials Science. Vol. 53 (2018) . - pp. 514-521.
DOI: https://doi.org/10.1007/s11003-018-0104-4

Maymó, Mireia Ruiz ; Shafti, Ali ; Faisal, A. Aldo:
FastOrient : Lightweight Computer Vision for Wrist Control in Assistive Robotic Grasping.
In: High tech human touch : 7th IEEE International Conference on Biomedical Robotics and Biomechatronics (Biorob). - Piscataway, NJ : IEEE, 2018 . - pp. 207-212
DOI: https://doi.org/10.1109/BIOROB.2018.8487622

Orlov, Pavel ; Shafti, Ali ; Auepanwiriyakul, Chaiyawan ; Songur, Noyan ; Faisal, A. Aldo:
A gaze-contingent intention decoding engine for human augmentation.
In: Proceedings of the 2018 ACM Symposium on Eye Tracking Research & Applications : ETRA 2018. - New York : Association for Computing Machinery, 2018 . - 91
DOI: https://doi.org/10.1145/3204493.3208350

Parbhoo, Sonali ; Gottesman, Omer ; Ross, Andrew Slavin ; Komorowski, Matthieu ; Faisal, A. Aldo ; Bon, Isabella ; Roth, Volker ; Doshi-Velez, Finale:
Improving counterfactual reasoning with kernelised dynamic mixing models.
In: PLoS One. Vol. 13 (2018) Issue 11 . - e0205839.
DOI: https://doi.org/10.1371/journal.pone.0205839

Woods, Billy ; Subramanian, Mahendran ; Shafti, Ali ; Faisal, A. Aldo:
Mechanomyography based closed-loop functional electrical stimulation cycling system.
In: High tech human touch : 7th IEEE International Conference on Biomedical Robotics and Biomechatronics (Biorob). - Piscataway, NJ : IEEE, 2018 . - pp. 179-184
DOI: https://doi.org/10.1109/BIOROB.2018.8487941

Raymond, Lou-Ann ; Piccini, Margherita ; Subramanian, Mahendran ; Pavel, Orlov ; Zito, Giuseppe ; Faisal, A. Aldo:
Natural Gaze Data-Driven Wheelchair.
bioRxiv , 2018
DOI: https://doi.org/10.1101/252684

Liu, Yao ; Gottesman, Omer ; Raghu, Aniruddh ; Komorowski, Matthieu ; Faisal, A. Aldo ; Doshi-Velez, Finale ; Brunskill, Emma:
Representation Balancing MDPs for Off-Policy Policy Evaluation.
In: Proceedings of the 32nd International Conference on Neural Information Processing Systems (NeurIPS 2018). - Red Hook, NY : Curran Associates, Inc., 2018 . - pp. 2649-2658 . - (Advances in Neural Information Processing Systems ; 31 )

Tobola, Andreas ; Leutheuser, Heike ; Pollak, Markus ; Spies, Peter ; Hofmann, Christian ; Weigand, Christian ; Eskofier, Björn M. ; Fischer, Georg:
Self-powered multiparameter health sensor.
In: IEEE Journal of Biomedical and Health Informatics. Vol. 22 (2018) Issue 1 . - pp. 15-22.
DOI: https://doi.org/10.1109/JBHI.2017.2708041

Auepanwiriyakul, Chaiyawan ; Harston, Alex ; Orlov, Pavel ; Shafti, Ali ; Faisal, A. Aldo:
Semantic fovea : real-time annotation of ego-centric videos with gaze context.
In: Proceedings of the 2018 ACM Symposium on Eye Tracking Research & Applications : ETRA 2018. - New York : Association for Computing Machinery, 2018 . - 87
DOI: https://doi.org/10.1145/3204493.3208349

Cunningham, James ; Hapsari, Anita ; Guilleminot, Pierre ; Shafti, Ali ; Faisal, A. Aldo:
The Supernumerary Robotic 3rd Thumb for Skilled Music Tasks.
In: High tech human touch : 7th IEEE International Conference on Biomedical Robotics and Biomechatronics (Biorob). - Piscataway, NJ : IEEE, 2018 . - pp. 665-670
DOI: https://doi.org/10.1109/BIOROB.2018.8487609

Li, Mickey ; Songur, Noyan ; Orlov, Pavel ; Leutenegger, Stefan ; Faisal, A. Aldo:
Towards an embodied semantic fovea : semantic 3D scene reconstruction from ego-centric eye-tracker videos.
arXiv , 2018
DOI: https://doi.org/10.48550/arXiv.1807.10561

Yan, Wen ; Schmidt, Anne ; Dudczig, Steffen ; Wetzig, Tony ; Wei, Yaowu ; Li, Yawei ; Schafföner, Stefan ; Aneziris, Christos G.:
Wettability phenomena of molten steel in contact with alumina substrates with alumina and alumina-carbon coatings.
In: Journal of the European Ceramic Society. Vol. 38 (2018) Issue 4 . - pp. 2164-2178.
DOI: https://doi.org/10.1016/j.jeurceramsoc.2017.12.001

2017

Kühlmann, Torsten M. ; Wolz, Manuel ; Kettl, Julian ; Heinz, Ramona ; Sänn, Alexander ; Wengler, Stefan ; Hoffmann, Julia ; Eimecke, Jörgen ; Baier, Daniel ; Lutz, Saskia ; Diel, Sören:
BF/M-Spiegel : Journal des Betriebswirtschaftlichen Forschungszentrums für Fragen der mittelständischen Wirtschaft e. V. an der Universität Bayreuth, 2017, Heft 2.
BF/M-Spiegel. Vol. 2017 (2017) Issue 2 . - 31 p.

Chudej, Kurt ; Fischer, Anne:
Optimal Vaccination Strategies against Dengue Fever.
2017
Event: 18th French-German-Italian Conference on Optimization 2017 , 25.-28.09.2017 , Paderborn, Deutschland.
(Conference item: Conference , Speech )

Klein, Melanie ; Steinhilper, Rolf:
Ressourceneffizienz in der CFK-Produktion? : Ergebnisse einer Demonstratorplattform.
2017
Event: Werkstoffwoche 2017 , 27.-29.09.2017 , Dresden.
(Conference item: Conference , Speech )

Arbter, Rene ; Koltzenburg, Sebastian ; Ruckdäschel, Holger ; Sommer, Maria-Kristin:
Process for Continuous Production of Fiber-Reinforced Foams : VERFAHREN ZUR KONTINUIERLICHEN HERSTELLUNG VON FASERVERSTÄRKTEN SCHAUMSTOFFEN.
WO2018036821A1 (2017)

Kühlmann, Torsten M. ; Wolz, Manuel ; Kettl, Julian ; Heinz, Ramona ; Sänn, Alexander ; Wengler, Stefan ; Hoffmann, Julia:
BF/M-Spiegel : Journal des Betriebswirtschaftlichen Forschungszentrums für Fragen der mittelständischen Wirtschaft e. V. an der Universität Bayreuth, 2017, Heft 1.
BF/M-Spiegel. Vol. 2017 (2017) Issue 1 . - 19 p.

Faghih-Naini, Sara ; Shen, Bo-Wen:
Quasi-Periodic Orbits in the Five-Dimensional Non-Dissipative Lorenz Model : the Role of the Nonlinear Feedback Loop.
2017
Event: 10th Chaotic Modeling and Simulation International Conference , 30 May - 2 June 2017 , Barcelona, Spain.
(Conference item: Conference , Speech )

Krenkel, Walter ; Knohl, Stefan ; Puchas, Georg:
Novel Manufacturing Techniques for Oxide Fiber Composites.
2017
Event: 12th Pacific Rim Conference on Ceramic and Glass Technology , 21.-26. Mai 2017 , Waikoloa, Hawaii, USA.
(Conference item: Conference , Speech )

Arbter, Rene ; Daun, Gregor ; Diehlmann, Tim ; Martin, Marc Claude ; Ruckdäschel, Holger ; Stein, Robert:
Assembling Fiber-Reinforced Foams : KONFEKTIONIERUNG FASERVERSTÄRKTER SCHAUMSTOFFE.
WO2017202671A1 (2017)

Arbter, Rene ; Gutmann, Peter ; Hebette, Christophe ; Ruckdäschel, Holger ; Sampath, Bangaru Dharmapuri Sriramulu ; Stein, Robert ; Stoll, Ragnar ; Terrenoire, Alexandre:
Fiber-Reinforced Foam Materials : FASERVERSTÄRKUNG VON REAKTIVSCHAUMSTOFFEN AUS EINEM FORMSCHÄUMVERFAHREN.
WO2017202668A1 (2017)

Arbter, Rene ; Diehlmann, Tim ; Martin, Marc Claude ; Renner, Christian ; Ruckdäschel, Holger ; Stein, Robert ; Tomas, Gianpaolo ; Windeler, Ludwig:
Fiber-Reinforcement of Foam Materials : FASERVERSTÄRKUNG VON SCHAUMSTOFFEN.
WO2017202672A1 (2017)

Arbter, Rene ; Gutmann, Peter ; Hebette, Christophe ; Ruckdäschel, Holger ; Sampath, Bangaru Dharmapuri Sriramulu ; Stein, Robert ; Stoll, Ragnar ; Terrenoire, Alexandre:
Fibre-Reinforcement of Reactive Foam Material Obtained by a Double Strip Foam Method or a Block Foam Method : FASERVERSTÄRKUNG VON REAKTIVSCHAUMSTOFFEN AUS EINEM DOPPELBANDSCHÄUM- ODER EINEM BLOCKSCHÄUMVERFAHREN.
WO2017202667A1 (2017)

Arbter, Rene ; Gutmann, Peter ; Hebette, Christophe ; Ruckdäschel, Holger ; Sampath, Bangaru Dharmapuri Sriramulu ; Stein, Robert ; Stoll, Ragnar ; Terrenoire, Alexandre:
Fibre-Reinforcement of Reactive Foams Obtained by a Moulding Foam Method : FASERVERSTÄRKUNG VON REAKTIVSCHAUMSTOFFEN AUS EINEM FORMSCHÄUMVERFAHREN.
WO2017202668A1 (2017)

Rosemann, Bernd:
Extrusion Blow Moulding : Perfecting the Plastic Bottle with Keeping Cool Blow by Blow.
2017
Event: Science in the Age of Experience , May 15-18, 2017 , Chicago, IL.
(Conference item: Conference , Poster )

Rosemann, Bernd:
One-Step Stretch Blow Moulding : A Holistic State of the Art Process Optimization using FE-Analysis.
2017
Event: Science in the Age of Experience , May 15-18, 2017 , Chicago, IL.
(Conference item: Conference , Poster )

Rosemann, Bernd ; Westermann, Hans-Henrik:
Simulation of Metal Cutting : A State of the Art Process Optimization using Arbitrary Lagrangian Eulerian (ALE)-approach.
2017
Event: Science in the Age of Experience , May 15-18, 2017 , Chicago, IL.
(Conference item: Conference , Poster )

Krenkel, Walter:
Microstructure Tailoring of C/C-SiC Composites.
2017
Event: 41th International Conference and Expo on Advanced Ceramics and Composites (ICACC) , 22.-27.01.2017 , Daytona Beach, Florida, USA.
(Conference item: Conference , Speech )

Pogorelov, Evgeny ; Kundin, Julia ; Fleck, Michael:
Analysis of the dependence of spinodal decomposition in nanoparticles on boundary reaction rate and free energy of mixing.
In: Computational Materials Science. Vol. 140 (2017) . - pp. 105-112.
DOI: https://doi.org/10.1016/j.commatsci.2017.08.028

Herold, Heike M. ; Scheibel, Thomas:
Applicability of biotechnologically produced insect silks.
In: Zeitschrift für Naturforschung C. Vol. 72 (2017) Issue 9-10 . - pp. 365-385.
DOI: https://doi.org/10.1515/znc-2017-0050

Zhu, Yejun ; Gensel, Julia ; Helmlinger, Lars ; Neumeyer, Thomas ; Thäter, Stefan ; Strube, Franziska ; Bauer, Christoph ; Rosemann, Bernd ; Altstädt, Volker:
Application of Amine-functionalized Cellulose Foam for CO2 Capture and Storage in Brewery Industry.
In: INRA (ed.): 4th International Conference on Biobased Materials and Composites : Book of Abstracts. - Nantes , 2017 . - p. 77

Golser, Adrian V. ; Scheibel, Thomas:
Biotechnological production of the mussel byssus derived collagen preColD.
In: RSC Advances. Vol. 7 (2017) Issue 61 . - pp. 38273-38278.
DOI: https://doi.org/10.1039/c7ra04515h

Krenkel, Walter:
Ceramic Matrix Composites (CMCs).
2017
Event: Workshop at MAPNA Group , September 26 and 27, 2017 , Tehran, Iran.
(Conference item: Workshop , Speech )

Krenkel, Walter:
Ceramics under Tensile Stresses : Conventional and Advanced Design Approaches.
2017
Event: CERMODEL 2017 Modelling and Simulation Meet Innovation in Ceramics Technology , 26.-28.07.2017 , Trento, Italy.
(Conference item: Conference , Speech )

Jérôme, Valérie ; Thoring, Lena ; Salzig, Denise ; Kubick, Stefan ; Freitag, Ruth:
Comparison of cell-based versus cell-free mammalian systems for the production of a recombinant human bone morphogenic growth factor.
In: Engineering in Life Sciences. Vol. 17 (2017) Issue 10 . - pp. 1097-1107.
DOI: https://doi.org/10.1002/elsc.201700005

Bauer, Joschka ; Scheibel, Thomas:
Conformational Stability and Interplay of Helical N- and C-Terminal Domains with Implications on Major Ampullate Spidroin Assembly.
In: Biomacromolecules. Vol. 18 (2017) Issue 3 . - pp. 835-845.
DOI: https://doi.org/10.1021/acs.biomac.6b01713

Jérôme, Valérie ; Werner, Melanie ; Kaiser, Patrick ; Freitag, Ruth:
Creating a Biomimetic Microenvironment for the Ex Vivo Expansion of Primary Human T Lymphocytes.
In: Macromolecular Bioscience. Vol. 17 (2017) Issue 9 . - 1700091.
DOI: https://doi.org/10.1002/mabi.201700091

Militzer, Christian ; Knohl, Stefan ; Dzhagan, Volodymyr ; Zahn, Dietrich R. T. ; Goedel, Werner A.:
Deposition of an organic-inorganic hybrid material onto carbon fibers via the introduction of furfuryl alcohol into the atomic layer depostion process of titania and subsequent pyrolysis.
In: Journal of Vacuum Science & Technology A. Vol. 35 (2017) Issue 1 . - 01B107.
DOI: https://doi.org/10.1116/1.4965699

Krenkel, Walter:
Development, Status and Perspectives of Carbon/Ceramic Brakes.
2017
Event: 2nd International Conference of the Iranian Ceramic Society , 16.-18. Mai 2017 , Teheran, Iran.
(Conference item: Conference , Speech )

Bauer, Joschka ; Scheibel, Thomas:
Dimerization of the Conserved N‑Terminal Domain of a Spider Silk Protein Controls the Self-Assembly of the Repetitive Core Domain.
In: Biomacromolecules. Vol. 18 (2017) Issue 8 . - pp. 2521-2528.
DOI: https://doi.org/10.1021/acs.biomac.7b00672

Kothmann, Martin H.:
Einfluss der Nanopartikelgeometrie auf die Bruchzähigkeit und das Ermüdungsrissausbreitungsverhalten von Epoxidharzen.
Hamburg : TuTech Verlag , 2017 . - XIII, 188 p.
( Doctoral thesis, 2017 , Universität Bayreuth, Fakultät für Ingenieurwissenschaften, Lehrstuhl Polymere Werkstoffe)

Kaiser, Patrick ; Reich, Steffen ; Leykam, Daniel ; Willert-Porada, Monika ; Greiner, Andreas ; Freitag, Ruth:
Electrogenic Single-Species Biocomposites as Anodes for Microbial Fuel Cells.
In: Macromolecular Bioscience. Vol. 17 (2017) Issue 7 . - 1600442.
DOI: https://doi.org/10.1002/mabi.201600442

Steinhilper, Rolf ; Weeber, Max ; Lehmann, Christian ; Bay, Christian ; Küfner, Thomas ; Thorenz, Benjamin ; Böhner, Johannes:
Die Energieeffiziente Fabrik : Wechselwirkung von Produktion und Technischer Gebäudeausrüstung.
bayme Bayerischer Unternehmensverband Metall und Elektro e.V.; vbm Verband der Bayerischen Metall- und Elektro-Industrie e.V.
München 2017

Steinhilper, Rolf ; Drews, Tom ; Molenda, Paul ; Oechsle, Oliver ; Siebert, Johannes ; Beneken, Gerd ; Kucich, Martin ; Hummel, Felix:
Entwicklung methodenbasierter produktionslogistischer Wertschöpfungsprozesse.
Bayreuth : Universität Bayreuth, Fraunhofer-Projektgruppe Prozessinnovation am Lehrstuhl für Umweltgerechte Produktionstechnik , 2017 . - 93 p.

Krenkel, Walter:
Entwicklung von bruchzähen keramischen Werkstoffen und Bauteilen.
2017
Event: 19. Werkstofftechnisches Kolloquium , 16.-17.03.2017 , TU Chemnitz, Deutschland.
(Conference item: Conference , Speech )

Kothmann, Martin H. ; Bakis, Gökhan ; Zeiler, Rico ; Ziadeh, Mazen ; Breu, Josef ; Altstädt, Volker:
Fatigue crack propagation in epoxy nanocomposites : Influence of the particle geometry.
In: Grellmann, Wolfgang ; Langer, Beate (ed.): Deformation and fracture behaviour of polymer materials. - Cham : Springer, 2017 . - pp. 23-32 . - (Springer Series in Materials Science ; 247 )
DOI: https://doi.org/10.1007/978-3-319-41879-7_2

Anton, Arthur Markus ; Heidebrecht, Aniela ; Mahmood, Nasir ; Beiner, Mario ; Scheibel, Thomas ; Kremer, Friedrich:
Foundation of the Outstanding Toughness in Biomimetic and Natural Spider Silk.
In: Biomacromolecules. Vol. 18 (2017) Issue 12 . - pp. 3954-3962.
DOI: https://doi.org/10.1021/acs.biomac.7b00990

Reichert, Florian ; Pérez-Mas, Ana ; Barreda, Daniel ; Blanco, Clara ; Santamaria, Ricardo ; Kuttner, Christian ; Fery, Andreas ; Langhof, Nico ; Krenkel, Walter:
Influence of the carbonization temperature on the mechanical properties of thermoplastic polymer derived C/C-SiC composites.
In: Journal of the European Ceramic Society. Vol. 37 (2017) Issue 2 . - pp. 523-529.
DOI: https://doi.org/10.1016/j.jeurceramsoc.2016.09.005

Wamser, Thomas ; Krenkel, Walter ; Puchas, Georg:
Keramische Verbundwerkstoffe und Verfahren zu ihrer Herstellung.
DE10 2016 007 652.6 (2017)

Chow, Catrin ; Rosemann, Bernd:
Kompakte Vorteile : Das Brikettieren zur Aufbereitung von Schleifschlämmen schont Kosten, Ressourcen und Umwelt.
In: ReSource. Vol. 30 (2017) Issue 2 . - pp. 25-29.

Gabriel, Tobias ; Rommel, Daniel ; Scherm, Florian ; Gorywoda, Marek ; Glatzel, Uwe:
Laser Cladding of Ultra-Thin Nickel-Based Superalloy Sheets.
In: Materials. Vol. 10 (2017) Issue 3 . - 279.
DOI: https://doi.org/10.3390/ma10030279

Herath, Mark:
Mathematische Überlegungen zu Dengue-Fieber-Modellen.
Bayreuth , 2017
( Bachelor thesis, 2017 , Universität Bayreuth, Fakultät für Mathematik, Physik und Informatik, Lehrstuhl Wissenschaftliches Rechnen)

Lang, Gregor ; Neugirg, Benedikt R. ; Kluge, Daniel ; Fery, Andreas ; Scheibel, Thomas:
Mechanical Testing of Engineered Spider Silk Filaments Provides Insights into Molecular Features on a Mesoscale.
In: ACS Applied Materials & Interfaces. Vol. 9 (2017) Issue 1 . - pp. 892-900.
DOI: https://doi.org/10.1021/acsami.6b13093

Wilhelm, Franz ; Affeldt, Ernst ; Fleischmann, Ernst ; Glatzel, Uwe ; Hammer, Joachim:
Modeling of the Deformation Behavior of Single Crystalline Nickel-Based Superalloys under Thermal Mechanical Loading.
In: International Journal of Fatigue. Vol. 97 (2017) . - pp. 1-8.
DOI: https://doi.org/10.1016/j.ijfatigue.2016.12.003

Riberio, Luis ; Flores, Octavio ; Furtat, Plinio ; Gervais, Christel ; Kempe, Rhett ; Machado, Ricardo A. F. ; Motz, Günter:
A novel PAN/silazane hybrid polymer for processing of carbon-based fibres with extraordinary oxidation resistance.
In: Journal of Materials Chemistry A. Vol. 5 (2017) Issue 2 . - pp. 720-729.
DOI: https://doi.org/10.1039/c6ta09293d

Faghih-Naini, Sara ; Shen, Bo-Wen:
On quasi-periodic solutions associated with the extended nonlinear feedback loop in the five-dimensional non-dissipative Lorenz model.
In: Skiadas, Christos H. (ed.): CHAOS 2017 Proceedings. - Barcelona : International Society for the Advancement of Science and Technology, 2017 . - pp. 197-213

Shen, Bo-Wen ; Faghih-Naini, Sara:
On recurrent solutions within high-dimensional, non-dissipative Lorenz models.
In: Skiadas, Christos H. (ed.): CHAOS 2017 Proceedings. - Barcelona : International Society for the Advancement of Science and Technology, 2017 . - pp. 773-787

Fleck, Michael ; Querfurth, Frank ; Glatzel, Uwe:
Phase field modeling of solidification in multi-component alloys with a case study on the Inconel 718 alloy.
In: Journal of Materials Research. Vol. 32 (2017) Issue 24 . - pp. 4605-4615.
DOI: https://doi.org/10.1557/jmr.2017.393

Lalire, Fanny ; Pommier, Stéphane ; Diologent, Frédéric ; Trosch, Tanja ; Glatzel, Uwe ; Völkl, Rainer:
Platinum Based Alloy, Use Thereof.
EP17186552.0 - 1392 (2017)

Barroso, Gilvan S. ; Li, Quan ; Motz, Günter ; Bordia, Rajendra K.:
Polymer-derived ceramic and ceramic-like coatings : innovative solutions for real problems.
In: American Ceramic Society Bulletin. Vol. 96 (2017) Issue 3 . - pp. 42-49.

Helfricht, Nicolas ; Doblhofer, Elena ; Bieber, Vera ; Lommes, Petra ; Sieber, Volker ; Scheibel, Thomas ; Papastavrou, Georg:
Probing the adhesion properties of alginate hydrogels : a new approach towards the preparation of soft colloidal probes for direct force measurements.
In: Soft Matter. Vol. 13 (2017) Issue 3 . - pp. 578-589.
DOI: https://doi.org/10.1039/C6SM02326F

Lang, Gregor ; Herold, Heike M. ; Scheibel, Thomas:
Properties of Engineered and Fabricated Silks.
In: Parry, David A. D. ; Squire, John M. (ed.): Fibrous Proteins: Structures and Mechanisms. - Cham : Springer, 2017 . - pp. 527-573 . - (Subcellular Biochemistry ; 82 )
DOI: https://doi.org/10.1007/978-3-319-49674-0_16

Thamm, Christopher ; Scheibel, Thomas:
Recombinant Production, Characterization, and Fiber Spinning of an Engineered Short Major Ampullate Spidroin (MaSp1s).
In: Biomacromolecules. Vol. 18 (2017) Issue 4 . - pp. 1365-1372.
DOI: https://doi.org/10.1021/acs.biomac.7b00090

DeSimone, Elise ; Schacht, Kristin ; Pellert, Alexandra ; Scheibel, Thomas:
Recombinant spider silk-based bioinks.
In: Biofabrication. Vol. 9 (2017) Issue 4 . - 044104.
DOI: https://doi.org/10.1088/1758-5090/aa90db

Krenkel, Walter:
Research and Market Development of Carbon/Ceramic Brakes.
2017
Event: Workshop Shandong Guojing New Materials , October 5th and 6th, 2017 , Beijing, China.
(Conference item: Workshop , Speech )

Krenkel, Walter ; Reichert, Florian:
RMI-Derived Ceramic Matrix Composites Based on the Liquid-Phase Pyrolysis of Carbon/Carbon.
2017
Event: 15th Conference and Exhibition of the European Ceramic Society , 9.-13.07.2017 , Budapest, Ungarn.
(Conference item: Conference , Speech )

Neuenfeldt, Martin ; Scheibel, Thomas:
Sequence Identification, Recombinant Production, and Analysis of the Self-Assembly of Egg Stalk Silk Proteins from Lacewing Chrysoperla carnea.
In: Biomolecules. Vol. 7 (2017) Issue 2 . - 43.
DOI: https://doi.org/10.3390/biom7020043

Jokisch, Stephan ; Scheibel, Thomas:
Spider silk foam coating of fabric.
In: Pure and Applied Chemistry. Vol. 89 (2017) Issue 12 . - pp. 1769-1776.
DOI: https://doi.org/10.1515/pac-2017-0601

You, Weijie ; Rotili, Dante ; Li, Tie-Mei ; Kambach, Christian ; Meleshin, Marat ; Schutkowski, Mike ; Chua, Katrin F. ; Mai, Antonello ; Steegborn, Clemens:
Structural Basis of Sirtuin 6 Activation by Synthetic Small Molecules.
In: Angewandte Chemie International Edition. Vol. 56 (2017) Issue 4 . - pp. 1007-1011.
DOI: https://doi.org/10.1002/anie.201610082

Petzold, Jana ; Aigner, Tamara B. ; Touska, Filip ; Zimmermann, Katharina ; Engel, Felix B. ; Scheibel, Thomas:
Surface Features of Recombinant Spider Silk Protein eADF4(κ16)-Made Materials are Well-Suited for Cardiac Tissue Engineering.
In: Advanced Functional Materials. Vol. 27 (2017) Issue 36 . - 1701427.
DOI: https://doi.org/10.1002/adfm.201701427

Borkner, Christian B. ; Wohlrab, Stefanie ; Möller, Eva ; Lang, Gregor ; Scheibel, Thomas:
Surface Modification of Polymeric Biomaterials Using Recombinant Spider Silk Proteins.
In: ACS Biomaterials Science & Engineering. Vol. 3 (2017) Issue 5 . - pp. 767-775.
DOI: https://doi.org/10.1021/acsbiomaterials.6b00306

Lenz-Leite, Mateus ; Barroso, Gilvan S. ; Parchovianský, Milan ; Galusek, Dušan ; Ionescu, Emanuel ; Krenkel, Walter ; Motz, Günter:
Synthesis and characterization of yttrium and ytterbium silicates from their oxides and an oligosilazane by the PDC route for coating applications to protect Si₃N₄ in hot gas environments.
In: Journal of the European Ceramic Society. Vol. 37 (2017) Issue 16 . - pp. 5177-5191.
DOI: https://doi.org/10.1016/j.jeurceramsoc.2017.04.034

Dai, Jixiang ; Sha, Jianjun ; Zu, Yufei ; Shao, Junqi ; Lei, Mingkai ; Flauder, Stefan ; Langhof, Nico ; Krenkel, Walter:
Synthesis and growth mechanism of SiC nanofibres on carbon fabrics.
In: CrystEngComm. Vol. 19 (2017) Issue 9 . - pp. 1279-1285.
DOI: https://doi.org/10.1039/C6CE02602H

Furtat, Plinio ; Lenz-Leite, Mateus ; Ionescu, Emanuel ; Machado, Ricardo A. F. ; Motz, Günter:
Synthesis of fluorine-modified polysilazanes via Si-H bonds activation and their application as protective hydrophobic coatings.
In: Journal of Materials Chemistry A. Vol. 5 (2017) Issue 48 . - pp. 25509-25521.
DOI: https://doi.org/10.1039/c7ta07687h

Krenkel, Walter:
Twenty Years of Experience with Carbon/Ceramic Brakes : Status and Perspectives.
2017
Event: ECI-Conference Advanced Ceramic Matrix Composites: Science and Technology of Materials, Design, Applications, Performance and Integration , November 5-9, 2017 , LaFonda on the Plaza Santa Fe, New Mexico, USA.
(Conference item: Conference , Speech )

Gensel, Julia ; Pawelski, Christin ; Altstädt, Volker:
Welding Quality in Polymer Bead Foams : an in situ SEM Study.
In: Maazouz, Abderrahim (ed.): Proceedings of the PPS-32 : The 32nd International Conference of the Polymer Processing Society; Conference Papers. - Melville, NY : AIP Publications, 2017 . - No. 060001 . - (AIP Conference Proceedings ; 1914 )
DOI: https://doi.org/10.1063/1.5016721

Sha, J. J. ; Li, J. ; Lv, Z. Z. ; Wang, S. H. ; Zhang, Z. F. ; Zu, Yufei ; Flauder, Stefan ; Krenkel, Walter:
ZrB₂-based composites toughened by as-reiceived and heat-treated short carbon fibers.
In: Journal of the European Ceramic Society. Vol. 37 (2017) Issue 2 . - pp. 549-558.
DOI: https://doi.org/10.1016/j.jeurceramsoc.2016.09.012

Iyer, Rajeshwari ; Ungless, Mark A. ; Faisal, A. Aldo:
Calcium-activated SK channels control firing regularity by modulating sodium channel availability in midbrain dopamine neurons.
In: Scientific Reports. Vol. 7 (2017) Issue 1 . - 5248.
DOI: https://doi.org/10.1038/s41598-017-05578-5

Pitchforth, J. ; Iodice, M. ; Main, M. ; Dziemian, S. ; Faisal, A. Aldo ; Bergsma, A. ; Muntoni, F.:
A clinical update on the eNHANCE project : Eye tracking control for reaching and grasping in an adolescent Duchenne muscular dystrophy (DMD) population.
In: Neuromuscular Disorders. Vol. 27 (2017) Issue Suppl. 2 . - S236.
DOI: https://doi.org/10.1016/j.nmd.2017.06.507

Faisal, A. Aldo:
Computer science : Visionary of virtual reality.
In: Nature. Vol. 551 (2017) Issue 7680 . - pp. 298-299.
DOI: https://doi.org/10.1038/551298a

Kotti, Margarita ; Duffell, Lynsey D. ; Faisal, A. Aldo ; McGregor, Alison H.:
Detecting knee osteoarthritis and its discriminating parameters using random forests.
In: Medical Engineering & Physics. Vol. 43 (2017) . - pp. 19-29.
DOI: https://doi.org/10.1016/j.medengphy.2017.02.004

Rommel, Daniel ; Terock, Michael ; Scherm, Florian ; Kuttner, Christian ; Glatzel, Uwe:
Direct metal deposition of abrasive tracks : Potentials concerning geometry and materials.
In: Journal of Laser Applications. Vol. 29 (2017) . - 022508.
DOI: https://doi.org/10.2351/1.4983230

Andreykiv, Oleksandr E. ; Shtayura, Nataliya ; Yarema, Roman Ya.:
Energy-based approach to evaluation of short fatigue crack growth rate in plates.
In: Strength of Materials. Vol. 49 (2017) . - pp. 778-787.
DOI: https://doi.org/10.1007/s11223-018-9923-7

Pedotti, Antonio ; Azevedo, Luis ; Faisal, A. Aldo:
Foreword.
In: Pedotti, Antonio ; Azevedo, Luis ; Faisal, A. Aldo (ed.): NEUROTECHNIX 2017 : Proceedings of the 5th International Congress on Neurotechnology, Electronics and Informatics. - Setúbal : SCITEPRESS, 2017 . - VII-VIII

Xiloyannis, Michele ; Gavriel, Constantinos ; Thomik, Andreas A. C. ; Faisal, A. Aldo:
Gaussian Process Autoregression for Simultaneous Proportional Multi-Modal Prosthetic Control With Natural Hand Kinematics.
In: IEEE Transactions on Neural Systems and Rehabilitation Engineering. Vol. 25 (2017) Issue 10 . - pp. 1785-1801.
DOI: https://doi.org/10.1109/TNSRE.2017.2699598

Schafföner, Stefan ; Fruhstorfer, Jens ; Faßauer, Christina ; Freitag, Lisa ; Jahn, Constantin ; Aneziris, Christos G.:
Influence of in situ phase formation on properties of calcium zirconate refractories.
In: Journal of the European Ceramic Society. Vol. 37 (2017) Issue 1 . - pp. 305-313.
DOI: https://doi.org/10.1016/j.jeurceramsoc.2016.08.017

Ma, Sanbao ; Yan, Wen ; Schafföner, Stefan ; Lin, Xiaoli ; Li, Nan ; Zhai, Yaojie ; Liu, Xijun ; Xu, Linlin:
Influence of magnesium aluminate spinel powder content on cement clinker corrosion and adherence properties of lightweight periclase-spinel refractories.
In: Ceramics International. Vol. 43 (2017) Issue 18 . - pp. 17026-17031.
DOI: https://doi.org/10.1016/j.ceramint.2017.09.113

Makin, Tamar R. ; de Vignemont, Frederique ; Faisal, A. Aldo:
Neurocognitive barriers to the embodiment of technology.
In: Nature Biomedical Engineering. Vol. 1 (2017) Issue 1 . - 0014.
DOI: https://doi.org/10.1038/s41551-016-0014

NEUROTECHNIX 2017 : Proceedings of the 5th International Congress on Neurotechnology, Electronics and Informatics.
ed.: Pedotti, Antonio ; Azevedo, Luis ; Faisal, A. Aldo
Setúbal : SCITEPRESS , 2017 . - X, 81 p.

Zheng, Patricia Z. ; Muaremi, Amir ; Leutheuser, Heike ; Norden, Justin ; Sinha, Aman ; Eskofier, Björn M. ; Smuck, Matthew:
Poster 109: Discriminating physical performance phenotypes of patients with chronic low back pain.
In: PM&R. Vol. 9 (2017) Issue 9S1 . - p. 169.
DOI: https://doi.org/10.1016/j.pmrj.2017.08.056

Leutheuser, Heike ; Heyde, Christian ; Roecker, Kai ; Gollhofer, Albert ; Eskofier, Björn M.:
Reference-free adjustment of respiratory inductance plethysmography for measurements during physical exercise.
In: IEEE Transactions on Biomedical Engineering. Vol. 64 (2017) Issue 12 . - pp. 2836-2846.
DOI: https://doi.org/10.1109/TBME.2017.2675941

Schafföner, Stefan ; Dietze, Christin ; Möhmel, Steffen ; Fruhstorfer, Jens ; Aneziris, Christos G.:
Refractories containing fused and sintered alumina aggregates : Investigations on processing, particle size distribution and particle morphology.
In: Ceramics International. Vol. 43 (2017) Issue 5 . - pp. 4252-4262.
DOI: https://doi.org/10.1016/j.ceramint.2016.12.067

Lin, Chin-Hsuan ; Faisal, A. Aldo:
The role of sensorimotor variability and computation in elderly’s falls.
bioRxiv , 2017
DOI: https://doi.org/10.1101/196584

Freitag, Lisa ; Schafföner, Stefan ; Lippert, Nicole ; Faßauer, Christina ; Aneziris, Christos G. ; Legner, Claudia ; Klotz, Ulrich E.:
Silica-free investment casting molds based on calcium zirconate.
In: Ceramics International. Vol. 43 (2017) Issue 9 . - pp. 6807-6814.
DOI: https://doi.org/10.1016/j.ceramint.2017.02.098

Leutheuser, Heike ; Lang, Nadine R. ; Gradl, Stefan ; Struck, Matthias ; Tobola, Andreas ; Hofmann, Christian ; Anneken, Lars ; Eskofier, Björn M.:
Textile integrated wearable technologies for sports and medical applications.
In: Schneegass, Stefan ; Amft, Oliver (ed.): Smart textiles : fundamentals, design, and interaction. - Cham : Springer, 2017 . - pp. 359-382 . - (Human–Computer Interaction Series )
DOI: https://doi.org/10.1007/978-3-319-50124-6_16

Maimon-Mor, Roni O. ; Fernandez-Quesada, Jorge ; Zito, Giuseppe A. ; Konnaris, Charalambos ; Dziemian, Sabine ; Faisal, A. Aldo:
Towards free 3D end-point control for robotic-assisted human reaching using binocular eye tracking.
In: 2017 International Conference on Rehabilitation Robotics (ICORR). - Piscataway, NJ : IEEE, 2017 . - pp. 1049-1054
DOI: https://doi.org/10.1109/ICORR.2017.8009388

Gradl, Stefan ; Cibis, Tobias ; Lauber, Jasmine ; Richer, Robert ; Rybalko, Ruslan ; Pfeiffer, Norman ; Leutheuser, Heike ; Wirth, Markus ; von Tscharner, Vinzenz ; Eskofier, Björn M.:
Wearable current-based ECG monitoring system with non-insulated electrodes for underwater application.
In: Applied Sciences. Vol. 7 (2017) Issue 12 . - 1277.
DOI: https://doi.org/10.3390/app7121277

Noronha, Bernardo ; Dziemian, Sabine ; Zito, Giuseppe A. ; Konnaris, Charalambos ; Faisal, A. Aldo:
“Wink to grasp” - comparing eye, voice & EMG gesture control of grasp with soft-robotic gloves.
In: 2017 International Conference on Rehabilitation Robotics (ICORR). - Piscataway, NJ : IEEE, 2017 . - pp. 1043-1048
DOI: https://doi.org/10.1109/ICORR.2017.8009387

2016

Jahn, Josefine ; Weeber, Max ; Böhner, Johannes ; Steinhilper, Rolf:
Ressourceneffizienanalyse von CFK-Metall-Fügetechnologien.
2016
Event: 3rd Green Factory Bavaria Kolloquium 2016 , 30.11.-01.12. 2016 , Nürnberg.
(Conference item: Conference , Speech )

Kühlmann, Torsten M. ; Wolz, Manuel ; Kettl, Julian ; Heinz, Ramona ; Windthorst, Kay ; Letner, Albert ; Freimuth, Christoph ; Ottmüller, Leon ; Weigelt, Susanne ; Wengler, Stefan:
BF/M-Spiegel : Journal des Betriebswirtschaftlichen Forschungszentrums für Fragen der mittelständischen Wirtschaft e. V. an der Universität Bayreuth, 2016, Heft 3.
BF/M-Spiegel. Vol. 2016 (2016) Issue 3 . - 16 p.

Proceedings ISFGMs 2016 14th International Symposium of Functionally Graded Materials : Multiscale & Multifunctional Structures.
ed.: Willert-Porada, Monika
Bayreuth , 2016 . - 252 p.

Scheibel, Thomas ; Zahn, Helmut ; Krasowski, Anita:
Silk.
In: Ullmann's Encyclopedia of Industrial Chemistry. - Weinheim : Wiley-VCH, 2016 . - pp. 1-15
DOI: https://doi.org/10.1002/14356007.a24_095.pub2

Kühlmann, Torsten M. ; Wolz, Manuel ; Kettl, Julian ; Leifels, Katrin ; Trebes, Isabell ; Buck, Christoph ; Freimuth, Christoph ; Ludwig, Jonas ; Fröhlich, Isabella:
BF/M-Spiegel : Journal des Betriebswirtschaftlichen Forschungszentrums für Fragen der mittelständischen Wirtschaft e. V. an der Universität Bayreuth, 2016, Heft 2.
BF/M-Spiegel. Vol. 2016 (2016) Issue 2 . - 15 p.

Faghih-Naini, Sara:
Modellierung und Numerik für Verkehrsflussprobleme.
Erlangen , 2016
( Bachelor thesis, 2016 , Friedrich-Alexander-Universität Erlangen-Nürnberg)

Kropka, Michael ; Mühlbacher, Mathias ; Neumeyer, Thomas ; Altstädt, Volker:
Thermoplastic unidirectional tapes : an appropriate alternative to woven fabric based organo sheets.
In: Proceedings of the 17th European Conference on Composite Materials : ECCM17 - 17th European Conference on Composite Materials, 26-30th June 2016, Munich, Germany. - Augsburg : MAI Carbon Cluster Management GmbH, 2016 . - CD-ROM

Krenkel, Walter:
Ceramic Matrix Composites : at the Threshold of Energy-Related Applications.
2016
Event: Materials Day 2016, Ceramics for Energy (CENERGY) , 29.04.2016 , Darmstadt, Deutschland.
(Conference item: Conference , Speech )

Krenkel, Walter:
Non-Brittle Ceramic Matrix Composites.
2016
Event: Dalian University of Technology , 25.4.2016 , Dalian, China.
(Conference item: Other Event type, Speech )

Knauer, Thorsten ; Heinz, Ramona ; Kettl, Julian ; Schmidt, Dennis ; Stadler, Christina ; Trebes, Isabell ; Wolz, Manuel:
BF/M-Spiegel : Journal des Betriebswirtschaftlichen Forschungszentrums für Fragen der mittelständischen Wirtschaft e. V. an der Universität Bayreuth, 2016, Heft 1.
BF/M-Spiegel. Vol. 2016 (2016) Issue 1 . - 15 p.

Bergsma, Arjen ; Lobo-Prat, Joan ; Vroom, Elizabeth ; Furlong, Pat ; Herder, Just L. ; Bergsma, Arjen ; Corrigan, Madeline ; de Groot, Imelda ; Faisal, A. Aldo ; Furlong, Pat ; Goemans, Nathalie ; Han, Jay ; Herder, Just ; Iodice, Mario ; Kennedy, Annie ; Koopman, Bart ; Lobo Prat, Joan ; Main, Marion ; Mathie, Blake ; Muntoni, Francesco ; Castro, Miguel Nobre ; Paalman, Micha ; Porter, John ; Rahman, Tariq ; Schneider, Joel ; Stienen, Arno ; Verstegen, Paul ; Vroom, Elizabeth ; Walsh, Conor:
1st Workshop on Upper-Extremity Assistive Technology for People with Duchenne : State of the art, emerging avenues, and challenges ; April 27th 2015, London, United Kingdom.
In: Neuromuscular Disorders. Vol. 26 (2016) Issue 6 . - pp. 386-393.
DOI: https://doi.org/10.1016/j.nmd.2016.04.005

Tostado, Pablo M. ; Abbott, William W. ; Faisal, A. Aldo:
3D gaze cursor : Continuous calibration and end-point grasp control of robotic actuators.
In: 2016 IEEE International Conference on Robotics and Automation (ICRA). - Piscataway, NJ : IEEE, 2016 . - pp. 3295-3300
DOI: https://doi.org/10.1109/ICRA.2016.7487502

Bauer, Joschka ; Schaal, Daniel ; Eisoldt, Lukas ; Schweimer, Kristian ; Schwarzinger, Stephan ; Scheibel, Thomas:
Acidic Residues Control the Dimerization of the N-terminal Domain of Black Widow Spiders' Major Ampullate Spidroin 1.
In: Scientific Reports. Vol. 6 (2016) . - 34442.
DOI: https://doi.org/10.1038/srep34442

Hardy, John G. ; Torres-Rendon, Jose Guillermo ; Leal-Egaña, Aldo ; Walther, Andreas ; Schlaad, Helmut ; Cölfen, Helmut ; Scheibel, Thomas:
Biomineralization of Engineered Spider Silk Protein-Based Composite Materials for Bone Tissue Engineering.
In: Materials. Vol. 9 (2016) Issue 7 . - 560.
DOI: https://doi.org/10.3390/ma9070560

DeSimone, Elise ; Schacht, Kristin ; Scheibel, Thomas:
Cations influence the cross-linking of hydrogels made of recombinant, polyanionic spider silk proteins.
In: Materials Letters. Vol. 183 (2016) . - pp. 101-104.
DOI: https://doi.org/10.1016/j.matlet.2016.07.044

Schierling, Martina ; Doblhofer, Elena ; Scheibel, Thomas:
Cellular uptake of drug loaded spider silk particles.
In: Biomaterials Science. Vol. 4 (2016) Issue 10 . - pp. 1515-1523.
DOI: https://doi.org/10.1039/C6BM00435K

Krenkel, Walter:
Ceramic Matrix Composites : Structural Materials for High Temperature Applications.
2016
Event: Korea Atomic Energy Research Institute (KAERI) Korea Institute of Energy Research (KIER) , September 30, 2016 , Daejeon, Korea.
(Conference item: Other Event type, Speech )

Krenkel, Walter ; Langhof, Nico:
Ceramic Matrix Composites for High Performance Friction Applications.
In: Lee, Bill ; Gadow, Rainer ; Mitic, Vojislav (ed.): Proceedings of the IV Advanced Ceramics and Applications Conference. - Amsterdam : Atlantis Press, 2016

Schuh, Christian ; Rosemann, Bernd ; Oechsle, Oliver:
Collaborative Process Optimization : An Approach to Individual Packaging Hollows.
Athens : Athens Institute for Education and Research , 2016 . - 11 p.

Helfricht, Nicolas ; Doblhofer, Elena ; Duval, Jérôme F. L. ; Scheibel, Thomas ; Papastavrou, Georg:
Colloidal Properties of Recombinant Spider Silk Protein Particles.
In: The Journal of Physical Chemistry C. Vol. 120 (2016) Issue 32 . - pp. 18015-18027.
DOI: https://doi.org/10.1021/acs.jpcc.6b03957

Lengsfeld, Hauke ; Wolff-Fabris, Felipe ; Krämer, Johannes ; Lavalle, Javier ; Altstädt, Volker:
Composite Technology : Prepregs and Monolithic Part Fabrication Technologies.
München : Hanser , 2016 . - XV, 205 p.

DOI: https://doi.org/10.3139/9781569906002

Rosemann, Bernd ; Thäter, Stefan ; Höfling, Felix:
CO₂-Rückgewinnung : Innovatives Rückgewinnungsverfahren soll Kosten und Umweltbelastung verringern.
In: Brauwelt. Vol. 2016 (2016) Issue 42 . - pp. 1220-1223.

Kubota, Yuki ; Fukuda, Kohei ; Hatta, Hiroshi ; Langhof, Nico ; Krenkel, Walter ; Kogo, Yasuo:
Crack development and deformation mechanisms of carbon-fiber-reinforced plastics at elevated temperatures.
In: Engineering Fracture Mechanics. Vol. 153 (2016) . - pp. 244-258.
DOI: https://doi.org/10.1016/j.engfracmech.2015.12.004

Krieg, Fabian ; Mosbacher, Mike ; Fried, Markus ; Affeldt, Ernst ; Glatzel, Uwe:
Creep and Oxidation Behaviour of Coated and Uncoated Thin Walled Single Crystal Samples of the Alloy PWA1484.
In: Superalloys 2016 : Proceedings of the 13th Intenational Symposium of Superalloys. - Hoboken, New Jersey : Wiley, 2016 . - pp. 773-779
DOI: https://doi.org/10.1002/9781119075646.ch83

Krenkel, Walter:
Design Approaches for the Joining of Ceramic Components.
2016
Event: ADMACOM Workshop , 14.-15. September 2016 , Brussels, Belgium.
(Conference item: Workshop , Speech )

Stolze, Christian ; Janoschka, Tobias ; Schubert, Ulrich S. ; Müller, Frank A. ; Flauder, Stefan:
Directional Solidification with Constant Ice Front Velocity in the Ice-Templating Process.
In: Advanced Engineering Materials. Vol. 18 (2016) Issue 1 . - pp. 111-120.
DOI: https://doi.org/10.1002/adem.201500235

Fedoseeva, Alexandra ; Dudova, Nadya ; Glatzel, Uwe ; Kaibyshev, Rustam:
Effect of W on Tempering Behaviour of a 3 %Co Modified P92 Steel.
In: Journal of Materials Science. Vol. 51 (2016) Issue 20 . - pp. 9424-9439.
DOI: https://doi.org/10.1007/s10853-016-0188-x

Nunes Linhares, Felipe:
Entwicklung von Biodiesel-resistenten Nitrilkautschukformulierungen.
Bayreuth , 2016
( Doctoral thesis, 2016 , Universität Bayreuth, Fakultät für Ingenieurwissenschaften, Lehrstuhl Polymere Werkstoffe)

Strich, Franz ; Robinski, Max ; Mau, Wilfried ; Girndt, Matthias:
Die Erfassung aktivitätsrelevanter Komorbidität im Patientenurteil mit der deutschen Version des Self-Administered Comorbidity Questionnaire : Eine Validierungsstudie.
In: Deutsche Rentenversicherung Bund (ed.): 25. Rehabilitationswissenschaftliches Kolloquium : Deutscher Kongress für Rehabilitationsforschung ; Gesundheitssystem im Wandel - Perspektiven der Rehabilitation. - Berlin , 2016 . - pp. 54-56 . - (DRV-Schriften ; 109 )

Li, Yang ; Xiao, Peng ; Luo, Heng ; Almeida, Renato S. M. ; Li, Zhuan ; Zhou, Wei ; Brückner, Alexander ; Reichert, Florian ; Langhof, Nico ; Krenkel, Walter:
Fatigue behavior and residual strength evolution of 2.5D C/C-SiC composites.
In: Journal of the European Ceramic Society. Vol. 36 (2016) Issue 16 . - pp. 3977-3985.
DOI: https://doi.org/10.1016/j.jeurceramsoc.2016.07.009

Westermann, Hans-Henrik ; Rosemann, Bernd ; Steinhilper, Rolf:
Finite Element Analysis of the influence on thermo-mechanical load resulting from the cutting edge radius : a simulation based contribution to energy efficient milling operations using an Arbitrary Lagrangian Eulerian (ALE)-approach.
2016
Event: 5th International Conference on Virtual Machining Process Technology (VMPT 2016) , 22.-25. Mai 2016 , Taipei, Taiwan.
(Conference item: Conference , Speech )

Weber, Heinz ; de Grave, Isidoor ; Röhrl, Eckhard ; Altstädt, Volker:
Foamed Plastics.
In: Elvers, Barbara (ed.): Ullmann's polymers and plastics : products and processes. - Weinheim : Wiley-VCH, 2016
DOI: https://doi.org/10.1002/14356007.a11_435.pub2

Langhof, Nico ; Rabenstein, M. ; Rosenlöcher, Jens ; Hackenschmidt, Reinhard ; Krenkel, Walter ; Rieg, Frank:
Full-ceramic brake systems for high performance friction applications.
In: Journal of the European Ceramic Society. Vol. 36 (2016) Issue 15 . - pp. 3823-3832.
DOI: https://doi.org/10.1016/j.jeurceramsoc.2016.04.040

Krenkel, Walter:
Herstellung und Eigenschaften von CMC.
2016
Event: Clustertreff „CMC für die Chemietechnik“ , 1. Juni 2016 , Evonik Industries, Hanau.
(Conference item: Conference , Speech )

Pérez-González, Francisco A. ; Ramírez-Ramírez, Javier H. ; Terock, Michael ; Garza-Montes-de-Oca, Nelson F. ; Glatzel, Uwe ; Colás, Rafael:
High-temperature Oxidation of a Nickel Base Superalloy at Different Oxygen Partial Pressures.
In: Corrosion Engineering, Science and Technology. Vol. 51 (2016) Issue 7 . - pp. 513-521.
DOI: https://doi.org/10.1080/1478422X.2016.1158226

Sha, J. J. ; Li, J. ; Wang, S. H. ; Zhang, Z. F. ; Zu, Yufei ; Flauder, Stefan ; Krenkel, Walter:
Improved microstructure and fracture properties of short carbon fiber-toughened ZrB₂-based UHTC composites via colloidal process.
In: International Journal of Refractory Metals and Hard Materials. Vol. 60 (2016) . - pp. 68-74.
DOI: https://doi.org/10.1016/j.ijrmhm.2016.07.010

Raup, Alexander ; Stahlschmidt, Ullrich ; Jérôme, Valérie ; Synatschke, Christopher V. ; Müller, Axel H. E. ; Freitag, Ruth:
Inﬂuence of Polyplex Formation on the Performance of Star-Shaped Polycationic Transfection Agents for Mammalian Cells.
In: Polymers. Vol. 8 (2016) Issue 6 . - 224.
DOI: https://doi.org/10.3390/polym8060224

Ladewig, Alexander ; Schlick, Georg ; Fisser, Maximilian ; Schulze, Volker ; Glatzel, Uwe:
Influence of the shielding gas flow on the removal of process by-products in the selective laser melting process.
In: Additive Manufacturing. Vol. 10 (2016) . - pp. 1-9.
DOI: https://doi.org/10.1016/j.addma.2016.01.004

Mertel, Robert ; Konrad, Christian ; Terock, Michael ; Völkl, Rainer ; Glatzel, Uwe:
Internal oxidation of ternary alloys forming a high oxygen conductive oxide.
In: Oxidation of Metals. Vol. 86 (2016) . - pp. 193-203.
DOI: https://doi.org/10.1007/s11085-016-9631-2

Stolze, Christian ; Janoschka, Tobias ; Flauder, Stefan ; Müller, Frank A. ; Hager, Martin D. ; Schubert, Ulrich S.:
Investigation of Ice-Templated Porous Electrodes for Application in Organic Batteries.
In: ACS Applied Materials & Interfaces. Vol. 8 (2016) Issue 36 . - pp. 23614-23623.
DOI: https://doi.org/10.1021/acsami.6b05018

Krenkel, Walter:
Keramische Verbundwerkstoffe : Aktueller Stand und Perspektiven.
2016
Event: Kolloquium des Departments Werkstoffwissenschaften der Universität Erlangen-Nürnberg (FAU) , 29.11.2016 , Erlangen.
(Conference item: Conference , Speech )

Rommel, Daniel ; Scherm, Florian ; Kuttner, Christian ; Glatzel, Uwe:
Laser cladding of diamond tools : interfacial reactions of diamond and molten metal.
In: Surface and Coatings Technology. Vol. 291 (2016) . - pp. 62-69.
DOI: https://doi.org/10.1016/j.surfcoat.2016.02.014

Haynl, Christian ; Hofmann, Eddie ; Pawar, Kiran ; Förster, Stephan ; Scheibel, Thomas:
Microfluidics-Produced Collagen Fibers Show Extraordinary Mechanical Properties.
In: Nano Letters. Vol. 16 (2016) Issue 9 . - pp. 5917-5922.
DOI: https://doi.org/10.1021/acs.nanolett.6b02828

Krenkel, Walter:
Microstructural Tailoring of RMI-Derived Ceramic Matrix Composites.
2016
Event: ISASC 2016 : 4th International Symposium on New Frontier of Advanced Si-Based Ceramics and Composites , 25.-28. September 2016 , Busan, Korea.
(Conference item: Conference , Speech )

Trosch, Tanja ; Strößner, Johannes ; Völkl, Rainer ; Glatzel, Uwe:
Microstructure and Mechanical Properties of Selective Laser Melted Inconel 718 Compared to Forging and Casting.
In: Materials Letters. Vol. 164 (2016) . - pp. 428-431.
DOI: https://doi.org/10.1016/j.matlet.2015.10.136

Manzoni, Anna M. ; Singh, Sheela ; Daoud, Haneen ; Popp, Robert ; Völkl, Rainer ; Glatzel, Uwe ; Wanderka, Nelia:
On the Path to Optimizing the Al-Co-Cr-Cu-Fe-Ni-Ti High Entropy Alloy Family for High Temperature Applications.
In: Entropy. Vol. 18 (2016) Issue 4 . - 104.
DOI: https://doi.org/10.3390/e18040104

Kunst, Claudia ; Haderer, Marika ; Heckel, Sebastian ; Schlosser, Sophie ; Müller, Martina:
The p53 family in hepatocellular carcinoma.
In: Translational Cancer Research. Vol. 5 (2016) Issue 6 . - pp. 632-638.
DOI: https://doi.org/10.21037/tcr.2016.11.79

Fan, Shangwu ; Yang, Chuan ; He, Liuyang ; Du, Yong ; Krenkel, Walter ; Greil, Peter ; Travitzky, Nahum:
Progress of Ceramic Matrix Composites Brake Materials For Aircraft Application.
In: Reviews on Advanced Materials Science. Vol. 44 (2016) Issue 4 . - pp. 313-325.

Zambrano, Kenny ; Jérôme, Valérie ; Freitag, Ruth ; Buchholz, Rainer ; Jäck, Hans-Martin ; Hübner, Holger ; Schuh, Wolfgang:
Prolonged Ex vivo expansion and differentiation of naïve murine CD43− B splenocytes.
In: Biotechnology Progress. Vol. 32 (2016) Issue 4 . - pp. 978-989.
DOI: https://doi.org/10.1002/btpr.2265

Raup, Alexander ; Jérôme, Valérie ; Freitag, Ruth ; Synatschke, Christopher V. ; Müller, Axel H. E.:
Promoter, transgene, and cell line effects in the transfection of mammalian cells using PDMAEMA-based nano-stars.
In: Biotechnology Reports. Vol. 11 (2016) . - pp. 53-61.
DOI: https://doi.org/10.1016/j.btre.2016.05.003

Ulrich, Anke Silvia ; Galetz, Mathias C.:
Protective aluminide coatings for refractory metals.
In: Oxidation of Metals. Vol. 86 (2016) Issue 5 . - pp. 511-535.
DOI: https://doi.org/10.1007/s11085-016-9650-z

Kaplan, David L. ; Scheibel, Thomas:
Recombinant Silk Production in Bacteria.
In: Reference Module in Materials Science and Materials Engineering. - Amsterdam , 2016 . - pp. 8615-8618
DOI: https://doi.org/10.1016/B978-0-12-803581-8.02274-8

Schaal, Daniel ; Bauer, Joschka ; Schweimer, Kristian ; Scheibel, Thomas ; Rösch, Paul ; Schwarzinger, Stephan:
Resonance assignment of an engineered amino-terminal domain of a major ampullate spider silk with neutralized charge cluster.
In: Biomolecular NMR Assignments. Vol. 10 (2016) . - pp. 199-202.
DOI: https://doi.org/10.1007/s12104-016-9666-y

Klein, Melanie ; Steinhilper, Rolf:
Ressourceneffizienzsteigerung durch Materialsubstitution mit CFK.
In: Franke, Jörg ; Kreitlein, Sven (ed.): Tagungsband zum 3. Green Factory Bavaria Kolloquium 2016 Energieeffiziente Produktion. - Erlangen , 2016 . - pp. 453-462

Bauer, Joschka ; Scheibel, Thomas:
Die Schwarze Witwe und ihre Künste.
In: Spektrum. Vol. 12 (2016) Issue 2 . - pp. 60-63.

Langhof, Nico ; Krenkel, Walter:
Science Friction : Fabrication, evaluation and design of high performance C-fiber reinforced ceramic friction materials.
In: Carbon Composites Magazin. (2016) Issue 4 .

Balzereit, Sandra ; Altstädt, Volker ; Prös, F. ; Starzynski, Krzysztof ; Strubel, V.:
Selektive Metallisierung von Metallpartikeln gefülltem Kunststoff durch Laseraktivierung.
Identifikationsnummer noch nicht vergeben (2016)

Mushongera, Leslie T.:
Strain-induced γ'-coarsening during aging of Ni-base superalloys under uniaxial load : modeling and analysis.
Bayreuth , 2016 . - VI, 132 p.
( Doctoral thesis, 2016 , Universität Bayreuth, Fakultät für Ingenieurwissenschaften)

Li, Yang ; Xiao, Peng ; Li, Zhuan ; Zhou, Wei ; Liensdorf, Tom ; Freudenberg, Wolfgang ; Reichert, Florian ; Langhof, Nico ; Krenkel, Walter:
Strength evolution of cyclic loaded LSI-based C/C-SiC composites.
In: Ceramics International. Vol. 42 (2016) Issue 13 . - pp. 14505-14510.
DOI: https://doi.org/10.1016/j.ceramint.2016.06.061

Doblhofer, Elena ; Schmid, Jasmin ; Rieß, Martin ; Daab, Matthias ; Suntinger, Magdalena ; Habel, Christoph ; Bargel, Hendrik ; Hugenschmidt, Christoph ; Rosenfeldt, Sabine ; Breu, Josef ; Scheibel, Thomas:
Structural Insights into Water-Based Spider Silk Protein−Nanoclay Composites with Excellent Gas and Water Vapor Barrier Properties.
In: ACS Applied Materials & Interfaces. Vol. 8 (2016) Issue 38 . - pp. 25535-25543.
DOI: https://doi.org/10.1021/acsami.6b08287

Krenkel, Walter:
Successful Spin-off from Space to Terrestrial Applications : Development, Status and Perspectives of Carbon/Ceramic Brakes.
2016
Event: 9th International Conference on High Temperature Ceramic Matrix Composites (HTCMC 9) , June 26-July 1, 2016 , Toronto, Ontario, Canada.
(Conference item: Conference , Speech )

Seifert, Martin ; Motz, Günter:
Synthesis and high-temperature oxidation of a polymer-derived Mo-SiN based ceramic composite.
In: Journal of the European Ceramic Society. Vol. 36 (2016) Issue 15 . - pp. 3601-3606.
DOI: https://doi.org/10.1016/j.jeurceramsoc.2016.05.009

Terock, Michael ; Konrad, Christian ; Popp, Robert ; Völkl, Rainer ; Yang, Fan ; McComb, David W. ; Mills, Michael J. ; Glatzel, Uwe:
Tailored platinum-nickel nanostructures on zirconia developed by metal casting, internal oxidation and dealloying.
In: Corrosion Science. Vol. 112 (2016) . - pp. 246-254.
DOI: https://doi.org/10.1016/j.corsci.2016.06.010

Li, Yang ; Xiao, Peng ; Li, Zhuan ; Zhou, Wei ; Liensdorf, Tom ; Freudenberg, Wolfgang ; Langhof, Nico ; Krenkel, Walter:
Tensile fatigue behavior of plain-weave reinforced Cf/C-SiC composites.
In: Ceramics International. Vol. 42 (2016) Issue 6 . - pp. 6850-6857.
DOI: https://doi.org/10.1016/j.ceramint.2016.01.068

Krenkel, Walter ; Langhof, Nico ; Reichert, Florian:
Thermoplastic Carbon Precursors for Ceramic Matrix Composites.
2016
Event: 9th International Conference on High Temperature Ceramic Matrix Composites (HTCMC 9) , June 26-July 1, 2016 , Toronto, Ontario, Canada.
(Conference item: Conference , Speech )

Krenkel, Walter:
Twenty Years of Carbon/Ceramic Brakes : Development, Status and Perspectives.
2016
Event: 40th International Conference and Expo on Advanced Ceramics and Composites , 24.-29.01.2016 , Daytona Beach, USA.
(Conference item: Conference , Speech )

Peng, Ling ; Jjang, Shaohua ; Seuss, Maximilian ; Fery, Andreas ; Lang, Gregor ; Scheibel, Thomas ; Agarwal, Seema:
Two-in-One Composite Fibers With Side-by-Side Arrangement of Silk Fibroin and Poly(l-lactide) by Electrospinning.
In: Macromolecular Materials and Engineering. Vol. 301 (2016) Issue 1 . - pp. 48-55.
DOI: https://doi.org/10.1002/mame.201500217

Henrich, Dominik:
Wissenszugewinn bei wissenschaftlichen Arbeiten.
Bayreuth , 2016

Bargel, Hendrik ; Scheibel, Thomas:
Zukunftsfeld Bionik.
In: Spektrum. Vol. 12 (2016) Issue 1 . - pp. 54-57.

Faisal, A. Aldo:
Action Grammars : Extraction, recognition and prediction of movement primitives in tool-making.
In: American Journal of Physical Anthropology. Vol. 159 (2016) Issue S62 . - p. 141.
DOI: https://doi.org/10.1002/ajpa.22955

Lorenz, Romy ; Monti, Ricardo Pio ; Violante, Inês R. ; Anagnostopoulos, Christoforos ; Faisal, A. Aldo ; Montana, Giovanni ; Leech, Robert:
The Automatic Neuroscientist : A framework for optimizing experimental design with closed-loop real-time fMRI.
In: NeuroImage. Vol. 129 (2016) . - pp. 320-334.
DOI: https://doi.org/10.1016/j.neuroimage.2016.01.032

Tobola, Andreas ; Leutheuser, Heike ; Schmitz, Björn ; Hofmann, Christian ; Struck, Matthias ; Weigand, Christian ; Eskofier, Björn M. ; Fischer, Georg:
Battery runtime optimization toolbox for wearable biomedical sensors.
In: 2016 IEEE 13th International Conference on Wearable and Implantable Body Sensor Networks (BSN) : proceedings. - Piscataway, NJ : IEEE, 2016 . - pp. 199-204
DOI: https://doi.org/10.1109/BSN.2016.7516259

Konnaris, Charalambos ; Gavriel, Constantinos ; Thomik, Andreas A. C. ; Faisal, A. Aldo:
EthoHand : A dexterous robotic hand with ball-joint thumb enables complex in-hand object manipulation.
In: 6th IEEE RAS/EMBS International Conference on Biomedical Robotics and Biomechatronics (BioRob). - Piscataway, NJ : IEEE, 2016 . - pp. 1154-1159
DOI: https://doi.org/10.1109/BIOROB.2016.7523787

Rodríguez, M. ; Sylaidi, Anastasia ; Faisal, A. Aldo:
An fMRI-Compatible System for 3DOF Motion Tracking of Objects in Haptic Motor Control Studies.
In: Londral, Ana Rita ; Encarnação, Pedro (ed.): Advances in Neurotechnology, Electronics and Informatics : NEUROTECHNIX 2014. - Cham : Springer, 2016 . - pp. 115-123 . - (Biosystems & Biorobotics ; 12 )
DOI: https://doi.org/10.1007/978-3-319-26242-0_8

Schafföner, Stefan ; Freitag, Lisa ; Hubálková, Jana ; Aneziris, Christos G.:
Functional composites based on refractories produced by pressure slip casting.
In: Journal of the European Ceramic Society. Vol. 36 (2016) Issue 8 . - pp. 2109-2117.
DOI: https://doi.org/10.1016/j.jeurceramsoc.2016.02.008

Faisal, A. Aldo ; Neishabouri, Ali:
Fundamental Constraints on the Evolution of Neurons.
In: Shepherd, Stephen V. (ed.): The Wiley Handbook of Evolutionary Neuroscience. - Chichester : Wiley Blackwell, 2016 . - pp. 153-172
DOI: https://doi.org/10.1002/9781118316757.ch7

Dziemian, Sabine ; Abbott, William W. ; Faisal, A. Aldo:
Gaze-based teleprosthetic enables intuitive continuous control of complex robot arm use : Writing & drawing.
In: 6th IEEE RAS/EMBS International Conference on Biomedical Robotics and Biomechatronics (BioRob). - Piscataway, NJ : IEEE, 2016 . - pp. 1277-1282
DOI: https://doi.org/10.1109/BIOROB.2016.7523807

Faisal, A. Aldo ; Krebs, Hermano Igo ; Pedotti, Antonio:
Hands on neurotechnology.
In: Krebs, Hermano Igo ; Pedotti, Antonio ; Faisal, A. Aldo (ed.): NEUROTECHNIX 2016 : Proceedings of the 4th International Congress on Neurotechnology, Electronics and Informatics. - Setúbal : SCITEPRESS, 2016

Behbahani, Feryal M. P. ; Singla–Buxarrais, Guillem ; Faisal, A. Aldo:
Haptic SLAM : An Ideal Observer Model for Bayesian Inference of Object Shape and Hand Pose from Contact Dynamics.
In: Bello, Fernando ; Kajimoto, Hiroyuki ; Visell, Yon (ed.): Haptics : Perception, Devices, Control, and Applications ; Proceedings. Part 1. - Cham : Springer, 2016 . - pp. 146-157 . - (Lecture Notes in Computer Science ; 9774 )
DOI: https://doi.org/10.1007/978-3-319-42321-0_14

Leutheuser, Heike ; Gradl, Stefan ; Anneken, Lars ; Arnold, Martin ; Lang, Nadine ; Achenbach, Stephan ; Eskofier, Björn M.:
Instantaneous P- and T-wave detection : Assessment of three ECG fiducial points detection algorithms.
In: 2016 IEEE 13th International Conference on Wearable and Implantable Body Sensor Networks (BSN) : proceedings. - Piscataway, NJ : IEEE, 2016 . - pp. 329-334
DOI: https://doi.org/10.1109/BSN.2016.7516283

Wasza, Jakob ; Fischer, Peter ; Leutheuser, Heike ; Oefner, Tobias ; Bert, Christoph ; Maier, Andreas ; Hornegger, Joachim:
Real-time respiratory motion analysis using 4-D shape priors.
In: IEEE Transactions on Biomedical Engineering. Vol. 63 (2016) Issue 3 . - pp. 485-495.
DOI: https://doi.org/10.1109/TBME.2015.2463769

Konnaris, Charalambos ; Thomik, Andreas A. C. ; Faisal, A. Aldo:
Sparse Eigenmotions derived from daily life kinematics implemented on a dextrous robotic hand.
In: 6th IEEE RAS/EMBS International Conference on Biomedical Robotics and Biomechatronics (BioRob). - Piscataway, NJ : IEEE, 2016 . - pp. 1358-1363
DOI: https://doi.org/10.1109/BIOROB.2016.7523821

Lourenço, P. Rente ; Abbott, W. W. ; Faisal, A. Aldo:
Supervised EEG Ocular Artefact Correction Through Eye-Tracking.
In: Londral, Ana Rita ; Encarnação, Pedro (ed.): Advances in Neurotechnology, Electronics and Informatics : NEUROTECHNIX 2014. - Cham : Springer, 2016 . - pp. 99-113 . - (Biosystems & Biorobotics ; 12 )
DOI: https://doi.org/10.1007/978-3-319-26242-0_7

Fruhstorfer, J. ; Schafföner, Stefan ; Werner, J. ; Wetzig, T. ; Schöttler, L. ; Aneziris, C. G.:
Thermal shock performance of refractories for application in steel ingot casting.
In: Journal of Ceramic Science and Technology. Vol. 7 (2016) Issue 2 . - pp. 173-182.
DOI: https://doi.org/10.4416/JCST2016-00010

Lorenz, Romy ; Monti, Ricardo P. ; Hampshire, Adam ; Koush, Yury ; Anagnostopoulos, Christoforos ; Faisal, A. Aldo ; Sharp, David ; Montana, Giovanni ; Leech, Robert ; Violante, Ines R.:
Towards tailoring non-invasive brain stimulation using real-time fMRI and Bayesian optimization.
In: 6th International Workshop on Pattern Recognition in Neuroimaging (PRNI). - Piscataway, NJ : IEEE, 2016 . - 4 S.
DOI: https://doi.org/10.1109/PRNI.2016.7552338

2015

Aneziris, Christos G. ; Gerlach, Nora ; Grote, Holger ; Klippel, Uwe ; Lange, Friederike ; Schafföner, Stefan ; Speicher, Harm:
Pressure casting slip and refractory ceramic produced therefrom for gas turbine units.
9221718 (2015)

Arbter, Rene ; Gutmann, Peter ; Hebette, Christophe ; Ruckdäschel, Holger ; Sampath, Bangaru Dharmapuri Sriramulu ; Stein, Robert ; Stoll, Ragnar ; Terrenoire, Alexandre:
Fiber-Reinforced Molded Bodies Made of Expanded Particle Foam Material : FASERVERSTÄRKTE FORMKÖRPER AUS EXPANDIERTEM PARTIKELSCHAUM.
WO2016102246A1 (2015)

Arbter, Rene ; Daun, Gregor ; Diehlmann, Tim ; Gutmann, Peter ; Hartenstein, Markus ; Kiciak, Thomas ; Kirgis, Andreas ; Longo-Schedel, Daniela ; Martin, Marc Claude ; Merkel, Peter ; Morino, Alessio ; Ruckdäschel, Holger ; Sampath, Bangaru Dharmapuri Sriramulu ; Stein, Robert ; Terrenoire, Alexandre:
Fiber-Reinforcement for Anisotropic Foams : FASERVERSTÄRKUNG ANISOTROPER SCHAUMSTOFFE.
WO2016102243A1 (2015)

Arbter, Rene ; Daun, Gregor ; Diehlmann, Tim ; Gutmann, Peter ; Hartenstein, Markus ; Kiciak, Thomas ; Kirgis, Andreas ; Longo-Schedel, Daniela ; Martin, Marc Claude ; Merkel, Peter ; Morino, Alessio ; Ruckdäschel, Holger ; Sampath, Bangaru Dharmapuri Sriramulu ; Stein, Robert ; Terrenoire, Alexandre:
Fiber-Reinforcement of Blowing-Agent Containing Foam Materials.
WO2016102245A1 (2015)

Arbter, Rene ; Daun, Gregor ; Diehlmann, Tim ; Gutmann, Peter ; Hartenstein, Markus ; Kirgis, Andreas ; Longo-Schedel, Daniela ; Martin, Marc Claude ; Morino, Alessio ; Ruckdäschel, Holger ; Sampath, Bangaru Dharmapuri Sriramulu ; Stein, Robert ; Terrenoire, Alexandre:
Fiber-Reinforcement of Foam Materials, Consisting of Interconnected Segments.
WO2016102244A1 (2015)

Knauer, Thorsten ; Stadler, Christina ; Schmidt, Dennis ; Kettl, Julian ; Heinz, Ramona ; Wolz, Manuel ; Leifels, Katrin ; Vogler, Philipp:
BF/M-Spiegel : Journal des Betriebswirtschaftlichen Forschungszentrums für Fragen der mittelständischen Wirtschaft e. V. an der Universität Bayreuth, 2015, Heft 4.
BF/M-Spiegel. Vol. 2015 (2015) Issue 4 . - 15 p.

Krenkel, Walter:
Ceramic Materials for High Performance and Lightweight Transportation Systems.
2015
Event: Central South University (Vortrag) , 04.11.2015 , Changsha, China.
(Conference item: Other Event type, Speech )

Krenkel, Walter:
Carbon/Ceramic Brake Discs and Pads for High Performance Transportation Systems.
2015
Event: 9th International Conference on High-Performance Ceramics (CICC-9) , 05-07.11.2015 , Guilin, China.
(Conference item: Conference , Speech )

Knauer, Thorsten ; Stadler, Christina ; Schmidt, Dennis ; Letner, Albert ; Heinz, Ramona ; Ludwig, Jonas ; Wolz, Manuel:
BF/M-Spiegel : Journal des Betriebswirtschaftlichen Forschungszentrums für Fragen der mittelständischen Wirtschaft e. V. an der Universität Bayreuth, 2015, Heft 3.
BF/M-Spiegel. Vol. 2015 (2015) Issue 3 . - 15 p.

Thäter, Markus ; Chudej, Kurt ; Pesch, Hans Josef:
Optimal vaccination strategies for an improved SEIR model.
2015
Event: OR 2015 : International Conference on Operations Research 2015 : Optimal Decisions and Big Data , 02.-04.09.2015 , Wien, Austria.
(Conference item: Conference , Speech )

Neumeyer, Thomas ; Bauernfeind, Annika ; Eigner, Verena ; Müller, Claudia ; Pramberger, Kerstin ; Altstädt, Volker:
Novel Epoxy Prepreg Resins for Aircraft Interiors Based on Combinations of Halogen-Free Flame Retardants.
2015
Event: Deutscher Luft- und Raumfahrtkongress 2015 , 22.-24.09.2015 , Rostock, Deutschland.
(Conference item: Conference , Speech )

Altstädt, Volker ; Fathi, Amir ; Hill, Jan ; Holmes, Christopher E. ; Keilholz, Clemens ; Kerling, Sabrina ; Kirupanantham, Dharan ; Köppl, Thomas ; Le Hu, Minh Truu ; Price, Daniel S. ; Raps, Daniel ; Robertson, Christopher ; Smith, Paul l. M. ; Tarrier, James ; Wardlaw, Angus:
Expandierte Polyamidpellets und Verfahren zur Herstellung von Formkomponenten damit : Expanded Polyamide Pellets and Methods for Manufacturing Molded Components using them.
EP3041892A1 (2015)

Krenkel, Walter:
CMC Research Activities at the University of Bayreuth.
2015
Event: Dalian University of Technology / School of Aeronautics and Astronautics , 22.08.2015 , Dalian, China.
(Conference item: Lecture series , Speech )

Krenkel, Walter:
Keramische Reibsysteme im Automobilbau : Aktuelle Entwicklungen und zukünftige Potenziale.
2015
Event: CCeV Automotive Forum 2015 in der Legendenhalle der MOTORWORLD , 28.-29.07.2015 , Böblingen, Deutschland.
(Conference item: Conference , Speech )

Knauer, Thorsten ; Heinz, Ramona ; Stadler, Christina ; Schmidt, Dennis ; Schreyer, Maximilian ; Schäfer, Klaus ; Wolz, Manuel:
BF/M-Spiegel : Journal des Betriebswirtschaftlichen Forschungszentrums für Fragen der mittelständischen Wirtschaft e. V. an der Universität Bayreuth, 2015, Heft 2.
BF/M-Spiegel. Vol. 2015 (2015) Issue 2 . - 19 p.

Krenkel, Walter:
Ceramic Matrix Composites : Current Status and Perspectives.
2015
Event: School of Materials Science and Engineering / Southeast University , 07.-09.07.2015 , Nanjing, China.
(Conference item: Lecture series , Speech )

Mörl, Stefan ; Altstädt, Volker:
A novel Tool for continuous Processing of Polymer-metal-Hybrids.
2015
Event: ICCM20 : 20th International Conference on Composite Materials , 19.-24.07.2015 , Copenhagen, Denmark.
(Conference item: Conference , Paper )

Göttermann, Svenja ; Weinmann, Sandra ; Bonten, Christian ; Standau, Tobias ; Altstädt, Volker:
Modifiziertes Polylactid für die Schaumextrusion.
2015
Event: 24. Stuttgarter Kunststoffkolloquium , 25.-26.02.2015 , Stuttgart, Deutschland.
(Conference item: Conference , Speech )

Scheibel, Thomas:
Die Kräfte der Superhelden oder : Was Spiderman besser wissen sollte.
Universität Bayreuth
Bayreuth , 2015 . - 30 p.

Eymann, Torsten ; Höfer, Andreas ; Heinz, Ramona ; Rochi, Martin ; Schmidt, Dennis ; Stadler, Christina ; Schneider, Larissa ; Schreyer, Maximilian ; Trebes, Isabell ; Vogler, Philipp ; Wolz, Manuel:
BF/M-Spiegel : Journal des Betriebswirtschaftlichen Forschungszentrums für Fragen der mittelständischen Wirtschaft e. V. an der Universität Bayreuth, 2015, Heft 1.
BF/M-Spiegel. Vol. 2015 (2015) Issue 1 . - 15 p.

DeSimone, Elise ; Schacht, Kristin ; Jungst, Tomasz ; Groll, Jürgen ; Scheibel, Thomas:
Biofabrication of 3D constructs : fabrication technologies and spider silk proteins as bioinks.
In: Pure and Applied Chemistry. Vol. 87 (2015) Issue 8 . - pp. 737-749.
DOI: https://doi.org/10.1515/pac-2015-0106

Krenkel, Walter:
Carbon/Ceramic Brake Discs and Pads for Passenger Cars and Other Transportation Systems.
2015
Event: Chinesisch-deutsches Symposium Ultra-High Temperature Ceramic Matrix Composites , 26.-31.07.2015 , Darmstadt, Deutschland.
(Conference item: Workshop , Speech )

Krenkel, Walter:
Ceramic Matrix Composites Based on Liquid Phase Routes.
2015
Event: 39th International Conference and Exposition on Advanced Ceramics and Composites , 25.-30.01.2015 , Daytona Beach, USA.
(Conference item: Conference , Speech )

Krenkel, Walter ; Thebault, Jacques Georges:
Ceramic Matrix Composites for Friction Applications.
In: Bansal, Narottam P. ; Lamon, Jacques (ed.): Ceramic Matrix Composites : materials, modeling and technology. - Hoboken, NJ : Wiley, 2015 . - pp. 647-671
DOI: https://doi.org/10.1002/9781118832998.ch23

Krenkel, Walter:
CMC Jackets for Power Plant Pipes.
2015
Event: 11th International Conference on Ceramic Materials and Components for Energy and Environmental Applications , 14.-19.06.2015 , Vancouver, Canada.
(Conference item: Conference , Speech )

Schütz, Adelheid ; Völkl, Rainer ; Bölitz, Marie-Christin ; Glatzel, Uwe:
Corrosion of Platinum Alloy Electrodes in a LiO₂-Al2O₃-SiO₂ Melt.
In: European Journal of Glass Science and Technology Part A : Glass Technology. Vol. 56 (2015) Issue 3 . - pp. 81-87.

Azim, Maria A. ; Schliephake, Daniel ; Hochmuth, Christian ; Gorr, Bronislava ; Christ, Hans-Jürgen ; Glatzel, Uwe ; Heilmaier, Martin:
Creep Resistance and Oxidation Behavior of Novel Mo-Si-B-Ti Alloys.
In: JOM : the Journal of the Minerals, Metals & Materials Society. Vol. 67 (2015) Issue 11 . - pp. 2621-2628.
DOI: https://doi.org/10.1007/s11837-015-1560-z

Hausherr, Jan-Marcel ; Eitel, M. ; Krenkel, Walter:
Determination of material properties for short fibre reinforced C/C-SiC.
In: MATEC Web of Conferences. Vol. 29 (2015) . - 00005.
DOI: https://doi.org/10.1051/matecconf/20152900005

Tag, Andreas ; Weigel, Robert ; Hagelauer, Amelie ; Bader, Bernhard ; Pitschi, Maximilian ; Wagner, Karl C.:
Determination of Temperature Coefficients of thin film Materials in RF BAW Components.
In: 2015 German Microwave Conference. - Piscataway, NJ : IEEE, 2015 . - pp. 402-405
DOI: https://doi.org/10.1109/GEMIC.2015.7107838

Mushongera, Leslie T. ; Fleck, Michael ; Kundin, Julia ; Wang, Yunzhi ; Emmerich, Heike:
Effect of re on directional γ'-coarsening in commercial single crystal Ni-base superalloys : a phase field study.
In: Acta Materialia. Vol. 93 (2015) . - pp. 60-72.
DOI: https://doi.org/10.1016/j.actamat.2015.03.048

Tag, Andreas ; Bader, Bernhard ; Huck, Christian ; Karolewski, Dominik ; Pitschi, Maximilian ; Weigel, Robert ; Hagelauer, Amelie:
Effect of spatial distribution of dissipated power on modeling of SMR BAW resonators at high power levels.
In: IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control. Vol. 62 (2015) Issue 10 . - pp. 1856-1864.
DOI: https://doi.org/10.1109/TUFFC.2015.007036

Scheibel, Thomas:
Engineering of rec SSP allows defined drug uptake and release.
In: NSTI (ed.): Biotech, Biomaterials and Biomedical : TechConnect Briefs 2015. - Boca Raton : Productivy Press, 2015 . - pp. 1-4

Rosemann, Bernd:
Entsorgungswirtschaft : gestern - heute - morgen ; mit besserer Ressourcenbewirtschaftung zu nachhaltigerer Wertschöpfung.
In: Umwelt-Perspektiven. (2015) Issue 1 . - pp. 24-26.

Shi, Yinfeng ; Zhou, Peiran ; Jérôme, Valérie ; Freitag, Ruth ; Agarwal, Seema:
Enzymatically Degradable Polyester-Based Adhesives.
In: ACS Biomaterials Science & Engineering. Vol. 1 (2015) Issue 10 . - pp. 971-977.
DOI: https://doi.org/10.1021/acsbiomaterials.5b00217

Reichert, Florian ; Langhof, Nico ; Krenkel, Walter:
The Evaluation of Thermoplastic Precursors for C/C-SiC Manufactured by Liquid Silicon Infiltration (LSI).
In: Materials Science Forum. Vol. 825-826 (2015) . - pp. 232-239.
DOI: https://doi.org/10.4028/www.scientific.net/MSF.825-826.232

Krenkel, Walter ; Langhof, Nico:
Faserverbundkeramiken für Friktionsanwendungen.
In: Kriegesmann, Jochen (Hrsg.): Technische Keramische Werkstoffe. Band 7. Kapitel 8.3.1.1. - Köln : Dt. Wirtschaftsdienst, 2015 . - pp. 1-38

Lengsfeld, Hauke ; Wolff-Fabris, Felipe ; Krämer, Johannes ; Lacalle, Javier ; Altstädt, Volker:
Faserverbundwerkstoffe : Prepregs und ihre Verarbeitung.
München : Hanser , 2015 . - XIV, 209 p.

DOI: https://doi.org/10.3139/9783446440807

Hofmann, Reiner ; Völler, Heinz ; Nagels, Klaus ; Bindl, Dominik ; Vettorazzi, Eik ; Dittmar, Ronny ; Wohlgemuth, Walter A. ; Neumann, Till ; Störk, Stefan ; Bruder, Oliver ; Wegscheider, Karl ; Nagel, Eckhard ; Fleck, Eckart:
First outline and baseline data of a randomized, controlled multicenter trial to evaluate the health economic impact of home telemonitoring in chronic heart failure — CardioBBEAT.
In: Trials. Vol. 16 (2015) . - 343.
DOI: https://doi.org/10.1186/s13063-015-0886-8

Rosemann, Bernd:
Green Management, Green Production : Nachhaltigkeit im produzierenden Gewerbe.
AKAD University
Stuttgart : AKAD Bildungsgesellschaft mbH , 2015 . - 70 p.

Werner, Melanie ; Schmoldt, Daria ; Hilbrig, Frank ; Jérôme, Valérie ; Raup, Alexander ; Zambrano, Kenny ; Hübner, Holger ; Buchholz, Rainer ; Freitag, Ruth:
High Cell Density Cultivation of Human Leukemia T Cells (Jurkat Cells) in Semipermeable Polyelectrolyte Microcapsules.
In: Engineering in Life Sciences. Vol. 15 (2015) Issue 4 . - pp. 357-367.
DOI: https://doi.org/10.1002/elsc.201400186

Schütz, Adelheid ; Günthner, Martin ; Motz, Günter ; Greißl, Oliver ; Glatzel, Uwe:
High Temperature (Salt Melt) Corrosion Tests with Ceramic-Coated Steel.
In: Materials Chemistry and Physics. Vol. 159 (2015) . - pp. 10-18.
DOI: https://doi.org/10.1016/j.matchemphys.2015.03.023

Daoud, Haneen ; Manzoni, Anna M. ; Wanderka, Nelia ; Glatzel, Uwe:
High-Temperature Tensile Strength of Al₁0Co₂₅Cr₈Fe₁₅Ni₃₆Ti₆ Compositionally Complex Alloy (High-Entropy Alloy).
In: JOM : the Journal of the Minerals, Metals & Materials Society. Vol. 67 (2015) Issue 10 . - pp. 2271-2277.
DOI: https://doi.org/10.1007/s11837-015-1484-7

Kroeker, Lena:
In between Life and Death : Decision-making of HIV+ mothers in Lesotho.
Münster : LIT , 2015 . - 329 p. - (Beiträge zur Afrikaforschung ; 61 )
( Doctoral thesis, 2013 , Universität Bayreuth, Kulturwissenschaftliche Fakultät)

Review:

Margret Jäger: Lena Kroeker. In betwen Life and Death, In Zeitschrift für Medizinethnologie (2015),38, S. 246/247

Fleischmann, Ernst ; Konrad, Christian ; Preußner, Johannes ; Völkl, Rainer ; Affeldt, Ernst ; Glatzel, Uwe:
Influence of Solid Solution Hardening on Creep Properties of Single-Crystal Nickel-Based Superalloys.
In: Metallurgical and Materials Transactions A. Vol. 46 (2015) . - pp. 1125-1130.
DOI: https://doi.org/10.1007/s11661-014-2727-x

Reichert, Florian ; Langhof, Nico ; Krenkel, Walter:
Influence of Thermal Fiber Pretreatment on Microstructure and Mechanical Properties of C/C-SiC with Thermoplastic Polymer-Derived Matrices.
In: Advanced Engineering Materials. Vol. 17 (2015) Issue 8 . - pp. 1119-1126.
DOI: https://doi.org/10.1002/adem.201500193

Manzoni, Anna M. ; Daoud, Haneen ; Völkl, Rainer ; Glatzel, Uwe ; Wanderka, Nelia:
Influence of W, Mo and Ti Trace Elements on the Phase Separation in Al8Co17Cr17Cu8Fe17Ni33 based High Entropy Alloy.
In: Ultramicroscopy. Vol. 159 (2015) . - pp. 265-271.
DOI: https://doi.org/10.1016/j.ultramic.2015.06.009

Humenik, Martin ; Smith, Andrew M. ; Arndt, Sina ; Scheibel, Thomas:
Ion and seed dependent fibril assembly of a spidroin core domain.
In: Journal of Structural Biology. Vol. 191 (2015) Issue 2 . - pp. 130-138.
DOI: https://doi.org/10.1016/j.jsb.2015.06.021

Rosemann, Bernd ; Westermann, Hans-Henrik:
Kleiner Radius, große Wirkung : Gestaltung energieeffizienter Fräsprozesse durch Simulation der Schneidkantenverrundung.
2015
Event: Deutsche Simulia Konferenz 2015 , 12.-13. Dez. 2015 , Aachen.
(Conference item: Conference , Speech )

Barroso, Gilvan S. ; Motz, Günter ; Krenkel, Walter:
Low thermal conductivity coating system for application up to 1000 °C by simple PDC processing with active and passive fillers.
In: Journal of the European Ceramic Society. Vol. 35 (2015) Issue 12 . - pp. 3339-3348.
DOI: https://doi.org/10.1016/j.jeurceramsoc.2015.02.006

Strößner, Johannes ; Terock, Michael ; Glatzel, Uwe:
Mechanical and Microstructural Investigation of Nickel Based Superalloy IN 718 Manufactured by Selective Laser Melting (SLM).
In: Advanced Engineering Materials. Vol. 17 (2015) Issue 8 . - pp. 1099-1105.
DOI: https://doi.org/10.1002/adem.201500158

Fathi, Amir ; Altstädt, Volker:
Mechanical Properties of Multifunctional Foam Core Materials.
In: Friedrich, Klaus ; Breuer, Ulf (ed.): Multifunctionality of Polymer Composites : Challenges and New Solutions. - Amsterdam : Elsevier, 2015 . - pp. 262-301
DOI: https://doi.org/10.1016/B978-0-323-26434-1.00008-8

Flauder, Stefan ; Sajzew, Roman ; Müller, Frank A.:
Mechanical Properties of Porous β-Tricalcium Phosphate Composites Prepared by Ice-Templating and Poly(ε-caprolactone) Impregnation.
In: ACS Applied Materials & Interfaces. Vol. 7 (2015) Issue 1 . - pp. 845-851.
DOI: https://doi.org/10.1021/am507333q

Karolewski, Dominik ; Schäffel, C. ; Tag, Andreas ; Silva Cortes, Victor ; Hagelauer, Amelie ; Fischer, G.:
Modeling of BAW Filters for System Level Simulation.
In: 2015 German Microwave Conference. - Piscataway, NJ : IEEE, 2015 . - pp. 410-413
DOI: https://doi.org/10.1109/GEMIC.2015.7107840

Seifert, Martin ; Motz, Günter ; Shen, Zhijian ; Krenkel, Walter:
Nb(Si,C,N) composite materials densified by spark plasma sintering.
In: Journal of the European Ceramic Society. Vol. 35 (2015) Issue 12 . - pp. 3319-3327.
DOI: https://doi.org/10.1016/j.jeurceramsoc.2015.02.005

Göhler, Thomas ; Affeldt, Ernst ; Rettig, Ralf ; Singer, Robert ; Neumeier, Steffen ; Göken, Mathias ; Fleischmann, Ernst ; Glatzel, Uwe ; Völkl, Rainer:
Nickel-Based Alloy with Optimized Matrix Properties.
US20150284824A1 (2015)

Krenkel, Walter:
Non-Brittle Ceramic Matrix Composites.
2015
Event: Advanced Ceramics and Applications IV: New Frontiers in Multifunctional Material Science and Processing , 21.-23.09.2015 , Belgrade, Serbia.
(Conference item: Conference , Speech )

Krenkel, Walter:
Novel Processing Routes for Oxide CMCs.
2015
Event: 11th International Conference of Pacific Rim Ceramic Societies (PACRIM 11) , 30.08.-04.09.2015 , Jeju Island, Korea.
(Conference item: Conference , Speech )

Manzoni, Anna M. ; Singh, Sheela ; Daoud, Haneen ; Völkl, Rainer ; Glatzel, Uwe ; Wanderka, Nelia:
On the Optimization of the Microstructure and Mechanical Properties of Al-Co-Cr-Cu-Fe-Ni-Ti –Based High Entropy Alloys.
In: Jordan Journal of Physics. Vol. 8 (2015) Issue 3 . - pp. 177-186.

Daoud, Haneen ; Manzoni, Anna M. ; Wanderka, Nelia ; Glatzel, Uwe:
Oxidation Behavior of Al₈Co₁₇Cr₁₇Cu₈Fe₁₇Ni₃₃, Al₂₃Co₁₅Cr₂₃Cu₈Fe₁₅Ni₁₅ and ‎Al₁₇Co₁₇Cr₁₇Cu₁₇Fe₁₇Ni₁₇ Compositionally Complex Alloys (High Entropy Alloys) at ‎Elevated Temperatures in Air.
In: Advanced Engineering Materials. Vol. 17 (2015) Issue 8 . - pp. 1134-1141.
DOI: https://doi.org/10.1002/adem.201500179

Krenkel, Walter:
Oxide and Non-Oxide Ceramic Matrix Composites (CMCs).
2015
Event: 102nd Indian Science Congress : Science and Technology for Human Develpopment / Section of Materials Sciences , 03.-07.01.2015 , Mumbai, India.
(Conference item: Conference , Lecture )

Mushongera, Leslie T. ; Fleck, Michael ; Kundin, Julia ; Querfurth, Frank ; Emmerich, Heike:
Phase-field study of anisotropic γ'-coarsening kinetics in Ni-base superalloys with varying Re and Ru contents.
In: Advanced Engineering Materials. Vol. 17 (2015) Issue 8 . - pp. 1149-1157.
DOI: https://doi.org/10.1002/adem.201500168

Tag, Andreas ; Akstaller, Wolfgang ; Musolff, Christian ; Weigel, Robert ; Hagelauer, Amelie ; Bader, Bernhard ; Pitschi, Maximilian:
Polyharmonic Distortion Modeling of RF BAW Components.
In: 2015 IEEE MTT-S International Microwave Symposium. - Piscataway, NJ : IEEE, 2015
DOI: https://doi.org/10.1109/MWSYM.2015.7166954

Flores, Octavio ; Bordia, Rajendra K. ; Bernard, Thilo ; Uhlemann, Thomas ; Krenkel, Walter ; Motz, Günter:
Processing and characterization of large diameter ceramic SiCN monofilaments from commercial oligosilazanes.
In: RSC Advances. Vol. 129 (2015) Issue 5 . - pp. 107001-107011.
DOI: https://doi.org/10.1039/C5RA17300K

Altstädt, Volker:
Prüfung von Verbundwerkstoffen.
In: Grellmann, Wolfgang ; Seidler, Sabine (ed.): Kunststoffprüfung. 3., aktualisierte Auflage. - München : Hanser, 2015 . - pp. 547-600
DOI: https://doi.org/10.3139/9783446443907.010

Fleischmann, Ernst ; Miller, Michael K. ; Affeldt, Ernst ; Glatzel, Uwe:
Quantitative Experimental Determination of the Solid Solution Hardening Potential of Rhenium, Tungsten and Molybdenum in Single Crystal Nickel-Based Superalloys.
In: Acta Materialia. Vol. 87 (2015) . - pp. 350-356.
DOI: https://doi.org/10.1016/j.actamat.2014.12.011

Kinzel, Svenja ; Gabel, Johannes ; Völkl, Rainer ; Glatzel, Uwe:
Reasons for Volume Contraction after Long-Term Annealing of Waspaloy.
In: Advanced Engineering Materials. Vol. 17 (2015) Issue 8 . - pp. 1106-1112.
DOI: https://doi.org/10.1002/adem.201500159

Seeger, Herbert ; Langenbeck, Bernhard ; Langhof, Nico ; Krenkel, Walter:
Schwerlastbremse.
EP 15 18 14 41.5 (2015)

Krenkel, Walter:
Structural Ceramics for High Temperature Applications.
2015
Event: 10th Congress of the Iranian Ceramic Society and First International Congress on Advanced Ceramics , 04.-06.05.2015 , Tehran, Iran.
(Conference item: Conference , Speech )

Neumeyer, Thomas:
Struktur und Eigenschaften neuer, flammgeschützter Prepreg-Matrixsysteme für Anwendungen in der Kabine von Verkehrsflugzeugen.
Bayreuth , 2015
( Doctoral thesis, 2015 , Universität Bayreuth, Fakultät für Ingenieurwissenschaften, Lehrstuhl Polymere Werkstoffe)

Doblhofer, Elena ; Heidebrecht, Aniela ; Scheibel, Thomas:
To spin or not to spin: spider silk fibers and more.
In: Applied Microbiology and Biotechnology. Vol. 99 (2015) Issue 19 . - pp. 9361-9380.
DOI: https://doi.org/10.1007/s00253-015-6948-8

Fuhrmann, Lars ; Konrad, Christian ; Völkl, Rainer ; Glatzel, Uwe:
Transition from Internal to External Oxidation in Binary Ni-Zr and Ternary Ni-Zr-Y Alloys.
In: Corrosion Science. Vol. 94 (2015) . - pp. 218-223.
DOI: https://doi.org/10.1016/j.corsci.2015.02.006

Duan, Gaigai ; Jiang, Shaohua ; Jérôme, Valérie ; Wendorff, Joachim H. ; Fathi, Amir ; Uhm, Jacqueline S. ; Altstädt, Volker ; Herling, Markus M. ; Breu, Josef ; Freitag, Ruth ; Agarwal, Seema ; Greiner, Andreas:
Ultralight, Soft Polymer Sponges by Self-Assembly of Short Electrospun Fibers in Colloidal Dispersions.
In: Advanced Functional Materials. Vol. 25 (2015) Issue 19 . - pp. 2850-2856.
DOI: https://doi.org/10.1002/adfm.201500001

Hansine, Rogers ; Ramos, Alzira ; Pereira, Maria João ; Soares, Amilcar:
Use of Proba-V Images in Southern Africa for Dynamic of Desertification Indicators.
2015
Event: The Sixth International Conference on Bioenvironment, Biodiversity and Renewable Energies : BIONATURE 2015 , 24.-25. Mai 2015 , Rom, Italien.
(Conference item: Conference , Paper )

Burschka, Janina M.:
The value of Tai Chi to enhance physical and psychosocial health for people with multiple sclerosis.
Bayreuth , 2015 . - X, 103 p.
( Doctoral thesis, 2015 , Universität Bayreuth, Kulturwissenschaftliche Fakultät)

Hecht, E. E. ; Gutman, D. A. ; Khreisheh, N. ; Taylor, S. V. ; Kilner, J. ; Faisal, A. Aldo ; Bradley, B. A. ; Chaminade, T. ; Stout, D.:
Acquisition of Paleolithic toolmaking abilities involves structural remodeling to inferior frontoparietal regions.
In: Brain Structure and Function. Vol. 220 (2015) Issue 4 . - pp. 2315-2331.
DOI: https://doi.org/10.1007/s00429-014-0789-6

Leutheuser, Heike ; Gradl, Stefan ; Eskofier, Björn M. ; Tobola, Andreas ; Lang, Nadine ; Anneken, Lars ; Arnold, Martin ; Achenbach, Stephan:
Arrhythmia classification using RR intervals : Improvement with sinusoidal regression feature.
In: 2015 IEEE 12th International Conference on Wearable and Implantable Body Sensor Networks (BSN) : proceedings. - Piscataway, NJ : IEEE, 2015 . - pp. 1-5
DOI: https://doi.org/10.1109/BSN.2015.7299371

Brain Informatics and Health : 8th International Conference, BIH 2015, London, UK ; Proceedings.
ed.: Guo, Yike ; Friston, Karl ; Faisal, A. Aldo ; Hill, Sean ; Peng, Hanchuan
Cham : Springer , 2015 . - XV, 459 p. - (Lecture Notes in Computer Science ; 9250 )

DOI: https://doi.org/10.1007/978-3-319-23344-4

Full, Katharina ; Leutheuser, Heike ; Schlessman, Jason ; Armitage, Roger ; Eskofier, Björn M.:
Comparative study on classifying gait with a single trunk-mounted inertial-magnetic measurement unit.
In: 2015 IEEE 12th International Conference on Wearable and Implantable Body Sensor Networks (BSN) : proceedings. - Piscataway, NJ : IEEE, 2015 . - pp. 1-6
DOI: https://doi.org/10.1109/BSN.2015.7299375

Schafföner, Stefan ; Aneziris, Christos G. ; Berek, Harry ; Hubálková, Jana ; Rotmann, Björn ; Friedrich, Bernd:
Corrosion behavior of calcium zirconate refractories in contact with titanium aluminide melts.
In: Journal of the European Ceramic Society. Vol. 35 (2015) Issue 3 . - pp. 1097-1106.
DOI: https://doi.org/10.1016/j.jeurceramsoc.2014.09.032

Ferrante, Andrea ; Gavriel, Constantinos ; Faisal, A. Aldo:
Data-efficient hand motor imagery decoding in EEG-BCI by using Morlet wavelets & Common Spatial Pattern algorithms.
In: 7th International IEEE/EMBS Conference on Neural Engineering (NER) : Proceedings. Band 2. - Piscataway, NJ : IEEE, 2015 . - pp. 948-951
DOI: https://doi.org/10.1109/NER.2015.7146782

Belić, Jovana J. ; Faisal, A. Aldo:
Decoding of human hand actions to handle missing limbs in neuroprosthetics.
In: Frontiers in Computational Neuroscience. Vol. 9 (2015) . - 27.
DOI: https://doi.org/10.3389/fncom.2015.00027

Xiloyannis, Michele ; Gavriel, Constantinos ; Thomik, Andreas A. C. ; Faisal, A. Aldo:
Dynamic forward prediction for prosthetic hand control by integration of EMG, MMG and kinematic signals.
In: 7th International IEEE/EMBS Conference on Neural Engineering (NER) : Proceedings. Band 2. - Piscataway, NJ : IEEE, 2015 . - pp. 611-614
DOI: https://doi.org/10.1109/NER.2015.7146697

Abbott, William W. ; Thomik, Andreas A. C. ; Faisal, A. Aldo:
Embodied salience for gaze analysis in ecologically valid environments.
In: Journal of Vision. Vol. 15 (2015) Issue 12 . - 366.
DOI: https://doi.org/10.1167/15.12.366

Behbahani, Feryal M. P. ; Faisal, A. Aldo:
The emergence of decision boundaries is predicted by second order statistics of stimuli in visual categorization.
In: Journal of Vision. Vol. 15 (2015) Issue 12 . - 1173.
DOI: https://doi.org/10.1167/15.12.1173

Whitby, Ariadne ; Parrinello, Simona ; Faisal, A. Aldo:
Entropy measures of collective cell migration.
In: Bulletin of the American Physical Society. Vol. 60 (2015) Issue 1 .

Müller-Herrmann, Susanne ; Scheibel, Thomas:
Enzymatic Degradation of Films, Particles, and Nonwoven Meshes Made of a Recombinant Spider Silk Protein.
In: ACS Biomaterials Science & Engineering. Vol. 1 (2015) Issue 4 . - pp. 247-259.
DOI: https://doi.org/10.1021/ab500147u

Sylaidi, Anastasia ; Lourenco, Pedro ; Nageshwaran, Sathiji ; Lin, Chin-Hsuan ; Rodriguez, Marisol ; Festenstein, Richard ; Faisal, A. Aldo:
f2MOVE : fMRI-compatible haptic object manipulation system for closed-loop motor control studies.
In: 7th International IEEE/EMBS Conference on Neural Engineering (NER) : Proceedings. Band 2. - Piscataway, NJ : IEEE, 2015 . - pp. 1104-1107
DOI: https://doi.org/10.1109/NER.2015.7146821

Lang, Nadine R. ; Brischwein, Matthias ; Hasslmeyer, Erik ; Tantinger, Daniel ; Feilner, Sven ; Heinrich, Axel ; Leutheuser, Heike ; Gradl, Stefan ; Weigand, Christian ; Eskofier, Björn M. ; Struck, Matthias:
Filter and processing method to improve R-peak detection for ECG data with motion artefacts from wearable systems.
In: Murray, Alan (ed.): 2015 Computing in Cardiology Conference (CinC). - Piscataway, NJ : IEEE, 2015 . - pp. 917-920
DOI: https://doi.org/10.1109/CIC.2015.7411061

Xiloyannis, Michele ; Gavriel, Constantinos ; Thomik, Andreas A. C. ; Faisal, A. Aldo:
Gaussian Process Regression for accurate prediction of prosthetic limb movements from the natural kinematics of intact limbs.
In: 7th International IEEE/EMBS Conference on Neural Engineering (NER) : Proceedings. Band 2. - Piscataway, NJ : IEEE, 2015 . - pp. 659-662
DOI: https://doi.org/10.1109/NER.2015.7146709

Behbahani, Feryal M. P. ; Taunton, Ruth ; Thomik, Andreas A. C. ; Faisal, A. Aldo:
Haptic SLAM for context-aware robotic hand prosthetics : simultaneous inference of hand pose and object shape using particle filters.
In: 7th International IEEE/EMBS Conference on Neural Engineering (NER) : Proceedings. Band 2. - Piscataway, NJ : IEEE, 2015 . - pp. 719-722
DOI: https://doi.org/10.1109/NER.2015.7146724

Tantinger, Daniel ; Zrenner, Markus ; Lang, Nadine R. ; Leutheuser, Heike ; Eskofier, Björn M. ; Weigand, Christian ; Struck, Matthias:
Human authentication implemented for mobile applications based on ECG-data acquired from sensorized garments.
In: Murray, Alan (ed.): 2015 Computing in Cardiology Conference (CinC). - Piscataway, NJ : IEEE, 2015 . - pp. 417-420
DOI: https://doi.org/10.1109/CIC.2015.7408675

Schafföner, Stefan ; Aneziris, Christos G. ; Berek, Harry ; Rotmann, Björn ; Friedrich, Bernd:
Investigating the corrosion resistance of calcium zirconate in contact with titanium alloy melts.
In: Journal of the European Ceramic Society. Vol. 35 (2015) Issue 1 . - pp. 259-266.
DOI: https://doi.org/10.1016/j.jeurceramsoc.2014.08.031

Brachhold, Nora ; Schafföner, Stefan ; Aneziris, Christos G.:
Investigation of alkali corrosion resistance of potassium aluminosilicates using statistical techniques.
In: Ceramics International. Vol. 41 (2015) Issue 1, Part B . - pp. 1447-1456.
DOI: https://doi.org/10.1016/j.ceramint.2014.09.079

Gavriel, Constantinos ; Thomik, Andreas A. C. ; Lourenço, Pedro Rente ; Nageshwaran, Sathiji ; Athanasopoulos, Stavros ; Sylaidi, Anastasia ; Festenstein, Richard ; Faisal, A. Aldo:
Kinematic body sensor networks and behaviourmetrics for objective efficacy measurements in neurodegenerative disease drug trials.
In: 2015 IEEE 12th International Conference on Wearable and Implantable Body Sensor Networks (BSN). - Piscataway, NJ : IEEE, 2015 . - pp. 1-6
DOI: https://doi.org/10.1109/BSN.2015.7299426

Faisal, A. Aldo:
Mind meets machine.
(Review of: Gay, Malcolm: The Brain Electric : The Dramatic High-Tech Race to Merge Minds and Machines. New York, 2015)
In: Science. Vol. 350 (2015) Issue 6262 . - p. 746.
DOI: https://doi.org/10.1126/science.aad0787

Dickens, Luke ; Caldas, Bernardo ; Schoenhense, Benedikt ; Stan, Guy-Bart ; Faisal, A. Aldo:
The Moveable Feast of Predictive Reward Discounting in Humans.
2015
Event: The 2nd Multidisciplinary Conference on Reinforcement Learning and Decision Making (RLDM 2015) , 07.-10.06.2015 , Edmonton, Alberta, Canada.
(Conference item: Conference , Paper )

Ticchi, Alessandro ; Faisal, A. Aldo:
Non-linear dynamics in recurrently connected neural circuits implement Bayesian inference by sampling.
In: Bulletin of the American Physical Society. Vol. 60 (2015) Issue 1 .

Guo, Yike ; Friston, Karl ; Faisal, A. Aldo ; Hill, Sean ; Peng, Hanchuan:
Preface.
In: Guo, Yike ; Friston, Karl ; Faisal, A. Aldo ; Hill, Sean ; Peng, Hanchuan (ed.): Brain Informatics and Health : 8th International Conference, BIH 2015, London, UK ; Proceedings. - Cham : Springer, 2015 . - V-VI . - (Lecture Notes in Computer Science ; 9250 )

Lin, Chin-Hsuan ; Faisal, A. Aldo:
Robotic psychophysics system for assessment, diagnosis and rehabilitation of the neurological causes of falls in the elderly.
In: 37th Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC). - Piscataway, NJ : IEEE, 2015 . - pp. 3731-3734
DOI: https://doi.org/10.1109/EMBC.2015.7319204

Tobola, Andreas ; Streit, Franz J. ; Espig, Chris ; Korpok, Oliver ; Sauter, Christian ; Lang, Nadine ; Schmitz, Björn ; Hofmann, Christian ; Struck, Matthias ; Weigand, Christian ; Leutheuser, Heike ; Eskofier, Björn M. ; Fischer, Georg:
Sampling rate impact on energy consumption of biomedical signal processing systems.
In: 2015 IEEE 12th International Conference on Wearable and Implantable Body Sensor Networks (BSN) : proceedings. - Piscataway, NJ : IEEE, 2015 . - pp. 1-6
DOI: https://doi.org/10.1109/BSN.2015.7299392

Tobola, Andreas ; Espig, Chris ; Streit, Franz J. ; Korpok, Oliver ; Schmitz, Björn ; Hofmann, Christian ; Struck, Matthias ; Weigand, Christian ; Leutheuser, Heike ; Eskofier, Björn M. ; Fischer, Georg:
Scalable ECG hardware and algorithms for extended runtime of wearable sensors.
In: 2015 IEEE International Symposium on Medical Measurements and Applications (MeMeA) : Proceedings. - Piscataway, NJ : IEEE, 2015 . - pp. 255-260
DOI: https://doi.org/10.1109/MeMeA.2015.7145209

Abbott, William ; Thomik, Andreas ; Faisal, A. Aldo:
Sensory-motor system identification of active perception in ecologically valid environments.
In: Bulletin of the American Physical Society. Vol. 60 (2015) Issue 1 .

Gavriel, Constantinos ; Parker, Kim H. ; Faisal, A. Aldo:
Smartphone as an ultra-low cost medical tricorder for real-time cardiological measurements via ballistocardiography.
In: 2015 IEEE 12th International Conference on Wearable and Implantable Body Sensor Networks (BSN). - Piscataway, NJ : IEEE, 2015 . - pp. 1-6
DOI: https://doi.org/10.1109/BSN.2015.7299425

Thomik, Andreas ; Faisal, A. Aldo:
Sparse Coding of Natural Human Motion Yields Eigenmotions Consistent Across People.
In: Bulletin of the American Physical Society. Vol. 60 (2015) Issue 1 .

Thomik, Andreas ; Faisal, A. Aldo:
Sparse Encoding of Complex Action Sequences.
2015
Event: Computational and Systems Neuroscience, Cosyne 2015 , 05.-10.03.2015 , Salt Lake City, USA.
(Conference item: Conference , Paper )

Gradl, Stefan ; Leutheuser, Heike ; Elgendi, Mohamed ; Lang, Nadine ; Eskofier, Björn M.:
Temporal correction of detected R-peaks in ECG signals : A crucial step to improve QRS detection algorithms.
In: 2015 37th Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC) : proceedings. - Piscataway, NJ : IEEE, 2015 . - pp. 522-525
DOI: https://doi.org/10.1109/EMBC.2015.7318414

Ferrante, Andrea ; Gavriel, Constantinos ; Faisal, A. Aldo:
Towards a brain-derived neurofeedback framework for unsupervised personalisation of Brain-Computer Interfaces.
In: 7th International IEEE/EMBS Conference on Neural Engineering (NER) : Proceedings. Band 1. - Piscataway, NJ : IEEE, 2015 . - pp. 162-165
DOI: https://doi.org/10.1109/NER.2015.7146585

Wu, Yufei ; Faisal, A. Aldo:
Towards an integrative spiking neuron model of motor control : from cortex & basal ganglia to muscles & sensory feedback.
In: 7th International IEEE/EMBS Conference on Neural Engineering (NER) : Proceedings. Band 1. - Piscataway, NJ : IEEE, 2015 . - pp. 378-381
DOI: https://doi.org/10.1109/NER.2015.7146638

Gavriel, Constantinos ; Thomik, Andreas A. C. ; Lourenço, Pedro Rente ; Nageshwaran, Sathiji ; Athanasopoulos, Stavros ; Sylaidi, Anastasia ; Festenstein, Richard ; Faisal, A. Aldo:
Towards neurobehavioral biomarkers for longitudinal monitoring of neurodegeneration with wearable body sensor networks.
In: 7th International IEEE/EMBS Conference on Neural Engineering (NER) : Proceedings. Band 1. - Piscataway, NJ : IEEE, 2015 . - pp. 348-351
DOI: https://doi.org/10.1109/NER.2015.7146631

Thomik, Andreas A. C. ; Fenske, Sonja ; Faisal, A. Aldo:
Towards sparse coding of natural movements for neuroprosthetics and brain-machine interfaces.
In: 7th International IEEE/EMBS Conference on Neural Engineering (NER) : Proceedings. Band 2. - Piscataway, NJ : IEEE, 2015 . - pp. 938-941
DOI: https://doi.org/10.1109/NER.2015.7146780

Lorenz, Romy ; Monti, Ricardo Pio ; Cole, J. ; Anagnostopoulos, Christoforos ; Faisal, A. Aldo ; Montana, Giovanni ; Leech, Robert:
Towards steering the chronnectome : on the potential of dynamic functional connectivity-based neurofeedback of large scale brain networks.
2015
Event: Real-time Functional Imaging and Neurofeedback Conference , 12.-13.02.2015 , Gainesville, Florida.
(Conference item: Conference , Paper )

Mullan, Patrick ; Kanzler, Christoph M. ; Lorch, Benedikt ; Schroeder, Lea ; Winkler, Ludwig ; Laich, Larissa ; Riedel, Frederik ; Richer, Robert ; Luckner, Christoph ; Leutheuser, Heike ; Eskofier, Björn M. ; Pasluosta, Cristian:
Unobtrusive heart rate estimation during physical exercise using photoplethysmographic and acceleration data.
In: 2015 37th Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC) : proceedings. - Piscataway, NJ : IEEE, 2015 . - pp. 6114-6117
DOI: https://doi.org/10.1109/EMBC.2015.7319787

Heldberg, Beeke E. ; Kautz, Thomas ; Leutheuser, Heike ; Hopfengärtner, Rüdiger ; Kasper, Burkhard S. ; Eskofier, Björn M.:
Using wearable sensors for semiology-independent seizure detection : towards ambulatory monitoring of epilepsy.
In: 2015 37th Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC) : proceedings. - Piscataway, NJ : IEEE, 2015 . - pp. 5593-5596
DOI: https://doi.org/10.1109/EMBC.2015.7319660

Garnelo, Marta ; Ricoult, Sébastien G. ; Juncker, David ; Kennedy, Timothy E. ; Faisal, A. Aldo:
Variability and Reliability in Axon Growth Cone Navigation Decision Making.
In: Bulletin of the American Physical Society. Vol. 60 (2015) Issue 1 .

Jensen, Ulf ; Leutheuser, Heike ; Hofmann, Steffen ; Schuepferling, Benno ; Suttner, Gerald ; Seiler, Kristin ; Kornhuber, Johannes ; Eskofier, Björn M.:
A wearable real-time activity tracker.
In: Biomedical Engineering Letters. Vol. 5 (2015) Issue 2 . - pp. 147-157.
DOI: https://doi.org/10.1007/s13534-015-0184-0

Cibis, Tobias ; Groh, Benjamin H. ; Gatermann, Heike ; Leutheuser, Heike ; Eskofier, Björn M.:
Wearable real-time ECG monitoring with emergency alert system for scuba diving.
In: 2015 37th Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC) : proceedings. - Piscataway, NJ : IEEE, 2015 . - pp. 6074-6077
DOI: https://doi.org/10.1109/EMBC.2015.7319777

2014

Behbahani, Feryal M. P. ; Faisal, A. Aldo:
Human Visual categorization is only consistent with Bayesian generative representations.
2014
Event: Neuroscience 2014, Society for Neuroscience Annual Meeting , 15.-19.11.2014 , Washington, DC.
(Conference item: Conference , Paper )

Lorenz, Romy ; Faisal, A. Aldo ; Dinov, M. ; Violante, Ines R. ; Leech, Robert:
Neurofeedback training of large-scale brain networks.
2014
Event: Neuroscience 2014, Society for Neuroscience Annual Meeting , 15.-19.11.2014 , Washington, DC.
(Conference item: Conference , Paper )

Linhares, Felipe ; Mörl, Michaela ; Altstädt, Volker ; Furtado, Cristina R. G.:
INFLUÊNCIA DA ABSORÇÃO DE BIODIESEL NAS PROPRIEDADES DA BORRACHA NITRÍLICA.
2014
Event: COBEQ 2014 - 20. Congresso Brasileiro de Engenharia Química , 19.-22.10.2014 , Florianópolis, SC, Brasil.
(Conference item: Conference , Speech )

Krenkel, Walter:
CMC Research Activities at the University of Bayreuth.
2014
Event: Dalian University of Technology, School of Aeronautics and Astronautics , 22.08.2014 , Dalian, China.
(Conference item: Lecture series , Lecture )

Krenkel, Walter:
Oxide Fiber Composites of Different Fiber Architectures.
2014
Event: ICC-5 2014, 5th International Congress on Ceramics , 17.-21.08.2014 , Beijing, China,.
(Conference item: Conference , Speech )

Langhof, Nico ; Krenkel, Walter:
Innovative keramische Werkstoffe und Komponenten für stationäre Gasturbinen.
2014
Event: 4. VDI-Fachkonferenz "Werkstoffe in der Kraftwerkstechnik" , 04.-05. Juni 2014 , Raunheim bei Frankfurt a.M., Deutschland.
(Conference item: Conference , Speech )

Krenkel, Walter:
Advanced CMC Designs for Lightweight and High Temperature Applications.
2014
Event: CIMTEC 2014, 13th International Ceramic Congress , 08.-14.06.2014 , Montecatini Terme, Italy.
(Conference item: Conference , Speech )

Rios de Anda, Agustin ; Neumeyer, Thomas ; Lengsfeld, H. ; Rademaker, T. ; Altstädt, Volker:
Recycled carbon-fiber fleeces as a green alternative for reinforcing in-plane mechanical properties of thermoset composites.
2014
Event: ECCM16 - 16th European Conference on Composite Materials , 22.-26.06.2014 , Sevilla, Spain.
(Conference item: Conference , Speech )

Krenkel, Walter:
Ceramic Matrix Composites : Lightweight Materials for Thermomechanical Loaded Structures.
2014
Event: Politecnico di Torino, Department of Applied Physics and Engineering , 16.04.2014 , Torino, Italien.
(Conference item: Conference , Speech )

Krenkel, Walter:
Carbon Fiber Reinforced Silicon Carbide Ceramics.
2014
Event: Baltic State Technical University , 04.03.2014 , St. Petersburg, Russia.
(Conference item: Lecture series , Speech )

Krenkel, Walter:
Carbon/Ceramic Brake Disks and Pads for Passenger Cars and Other Transportation Systems.
2014
Event: 4th International Workshop on Advances in Asbestos-Free Friction Composites (IWAAFC-IV) , 13.-14.02.2014 , New Delhi, India.
(Conference item: Conference , Speech )

Krenkel, Walter:
Ceramic Matrix Composites for Lightweight and High Temperature Applications.
2014
Event: Department of Materials Science, Sardar Patel University , 17.02.2014 , Vallabh Vidyanagar, India.
(Conference item: Conference , Speech )

Kaiser, Patrick ; Werner, Melanie ; Jérôme, Valérie ; Hübner, Holger ; Buchholz, Rainer ; Freitag, Ruth:
Cell Retention by Encapsulation for the Cultivation of Jurkat Cells in Fixed and Fluidized Bed Reactors.
In: Biotechnology and Bioengineering. Vol. 111 (2014) Issue 12 . - pp. 2571-2579.
DOI: https://doi.org/10.1002/bit.25304

Flauder, Stefan ; Heinze, Thomas ; Müller, Frank A.:
Cellulose scaffolds with an aligned and open porosity fabricated via ice-templating.
In: Cellulose. Vol. 21 (2014) Issue 1 . - pp. 97-103.
DOI: https://doi.org/10.1007/s10570-013-0119-9

Hoffmann, Sascha W. ; Tug, Suzan ; Simon, Perikles:
Child-caregivers' body weight and habitual physical activity status is associated with overweight in kindergartners.
In: BMC Public Health. Vol. 14 (2014) . - 822.
DOI: https://doi.org/10.1186/1471-2458-14-822

Freitag, Ruth:
Chromatographic techniques in the downstream processing of proteins in biotechnology.
In: Pörtner, Ralf (ed.): Animal cell biotechnology : methods and protocols. - New York, NY : Humana Press, 2014 . - pp. 419-458 . - (Methods in Molecular Biology ; 1104 )
DOI: https://doi.org/10.1007/978-1-62703-733-4_25

Stöckel, Sabine ; Ebert, Susann ; Böttcher, Maike ; Seifert, Andreas ; Wamser, Thomas ; Schulze, Steffen ; Hietschold, Michael ; Gnaegi, Helmut ; Goedel, Werner A. ; Krenkel, Walter:
Coating of Alumina Fibres With Aluminium Phosphate by a Continous Chemical Vapour Deposition Process.
In: Chemical Vapor Deposition. Vol. 20 (2014) Issue 10/12 . - pp. 388-398.
DOI: https://doi.org/10.1002/cvde.201407099

Traßl, Christian ; Altstädt, Volker ; Schreier, P.:
Concepts for particle foam based ultralight automotive interior parts.
In: Altstädt, Volker ; Keller, Jan-Hendrik ; Fathi, Amir (ed.): PROCEEDINGS OF PPS-29 : The 29th International Conference of the Polymer Processing Society; Conference Papers. - Melville,NY : AIP Publishing, 2014 . - pp. 354-357 . - (AIP Conference Proceedings ; 1593 )
DOI: https://doi.org/10.1063/1.4873799

Liebscher, Christian H. ; Glatzel, Uwe:
Configuration of superdislocations in the γ′-Pt₃Al phase of a Pt-based superalloy.
In: Intermetallics. Vol. 48 (2014) . - pp. 71-78.
DOI: https://doi.org/10.1016/j.intermet.2013.12.006

Suhre, Michael H. ; Scheibel, Thomas ; Steegborn, Clemens ; Gertz, Melanie:
Crystallization and preliminary X-ray diffractionanalysis of proximal thread matrix protein 1(PTMP1) from Mytilus galloprovincialis.
In: Acta Crystallographica Section F. Vol. 70 (2014) Issue 6 . - pp. 769-772.
DOI: https://doi.org/10.1107/S2053230X14006165

Kühr, Christin ; Spörrer, Andreas N. J. ; Altstädt, Volker:
Determination of adhesion between thermoplastic and liquid silicone rubbers in hard-soft-combinations via mechanical peeling test.
In: Altstädt, Volker ; Keller, Jan-Hendrik ; Fathi, Amir (ed.): PROCEEDINGS OF PPS-29 : The 29th International Conference of the Polymer Processing Society; Conference Papers. - Melville, NY : AIP Publications, 2014 . - pp. 142-145 . - (AIP Conference Proceedings ; 1593 )
DOI: https://doi.org/10.1063/1.4873751

Langhof, Nico ; Krenkel, Walter:
Druckrohre für Kraftwerke der Zukunft : Faserverstärkte Armierungen steigern die Effizienz von Dampfkraftwerken.
In: Spektrum. Vol. 10 (2014) Issue 2 . - p. 81.

Müller, Johannes ; Spörrer, Andreas N. J. ; Altstädt, Volker:
Foam injection moulding of a TPO/TPC-blend and the effect of different nucleating agents on the resulting foam structure.
In: Altstädt, Volker ; Keller, Jan-Hendrik ; Fathi, Amir (ed.): PROCEEDINGS OF PPS-29 : The 29th International Conference of the Polymer Processing Society; Conference Papers. - Melville, NY : AIP Publications, 2014 . - pp. 367-373 . - (AIP Conference Proceedings ; 1593 )
DOI: https://doi.org/10.1063/1.4873802

Rosemann, Bernd ; Steinhilper, Rolf:
Fortschritt durch Rückschritt.
In: Laser + Photonik. (2014) Issue 2 . - pp. 52-55.

Roy, U. ; Roy, Himadri ; Daoud, Haneen ; Glatzel, Uwe ; Ray, K. K.:
Fracture toughness and fracture micromechanism in a cast AlCoCrCuFeNi high entropy alloy system.
In: Materials Letters. Vol. 132 (2014) . - pp. 186-189.
DOI: https://doi.org/10.1016/j.matlet.2014.06.067

Hardy, John G. ; Pfaff, André ; Leal-Egaña, Aldo ; Scheibel, Thomas:
Glycopolymer Functionalization of Engineered Spider Silk Protein-based Materials for Improved Cell Adhesion.
In: Macromolecular Bioscience. Vol. 14 (2014) Issue 7 . - pp. 936-942.
DOI: https://doi.org/10.1002/mabi.201400020

Albert, Benedikt ; Völkl, Rainer ; Glatzel, Uwe:
High-Temperature Oxidation Behavior of Two Nickel-Based Superalloys Produced by Metal Injection Molding for Aero Engine Applications.
In: Metallurgical and Materials Transactions A. Vol. 45 (2014) Issue 10 . - pp. 4561-4571.
DOI: https://doi.org/10.1007/s11661-014-2391-1

Tag, Andreas ; Weigel, Robert ; Hagelauer, Amelie ; Bader, Bernhard ; Huck, Christian ; Pitschi, Maximilian ; Karolewski, Dominik:
Influence of Dissipated Power Distribution on BAW Resonators' Behavior.
In: 2014 IEEE International Ultrasonics Symposium. - Piscataway, NJ : IEEE, 2014 . - pp. 2627-2630
DOI: https://doi.org/10.1109/ULTSYM.2014.0656

Tag, Andreas ; Weigel, Robert ; Hagelauer, Amelie ; Bader, Bernhard ; Huck, Christian ; Pitschi, Maximilian ; Wagner, Karl C. ; Karolewski, Dominik ; Schäffel, C.:
Influence of Temperature Distribution on Behavior, Modeling, and Reliability of BAW Resonators.
In: 2014 IEEE International Reliability Physics Symposium. - Piscataway, NJ : IEEE, 2014 . - S. 5C.5.1-5C.5.7
DOI: https://doi.org/10.1109/IRPS.2014.6860669

Hochmuth, Christian ; Schliephake, Daniel ; Völkl, Rainer ; Heilmaier, Martin ; Glatzel, Uwe:
Influence of zirconium content on microstructure and creep properties of Mo--9Si--8B alloys.
In: Intermetallics. Vol. 48 (2014) . - pp. 3-9.
DOI: https://doi.org/10.1016/j.intermet.2013.08.017

Ing. : Fakultät für Ingenieurwissenschaften.
Fakultät für Ingenieurwissenschaften, Universität Bayreuth

Bayreuth , 2014

Rosemann, Bernd ; Steinhilper, Rolf:
Kreislaufwirtschaft : zurück mit Zukunft ; profitabel und nachhaltig Wirtschaften mit Altgeräten.
In: Umwelt-Perspektiven. (2014) Issue 5 . - pp. 21-23.

Humenik, Martin ; Scheibel, Thomas:
Nanomaterial Building Blocks Based on Spider Silk - Oligonucleotide Conjugates.
In: ACS Nano. Vol. 8 (2014) Issue 2 . - pp. 1342-1349.
DOI: https://doi.org/10.1021/nn404916f

Göhler, Thomas ; Affeldt, Ernst ; Rettig, Ralf ; Singer, Robert ; Neumeier, Steffen ; Göken, Mathias ; Fleischmann, Ernst ; Glatzel, Uwe ; Völkl, Rainer:
Nickelbasislegierung mit optimierten Matrixeigenschaften.
EP2927336A1 (2014)

Konrad, Christian ; Völkl, Rainer ; Glatzel, Uwe:
A novel method for the preparation of porous zirconia ceramics with multimodal pore size distribution.
In: Journal of the European Ceramic Society. Vol. 34 (2014) Issue 5 . - pp. 1311-1319.
DOI: https://doi.org/10.1016/j.jeurceramsoc.2013.11.014

Krenkel, Walter:
Oxide and Non-Oxide Ceramic Matrix Composites Manufactured via Liquid Phase Routes.
2014
Event: 5th International Functional Nanomaterials and High-Purity Substances Conference , 06.-10.10.2014 , Suzdal, Russland.
(Conference item: Conference , Speech )

Njuhovic, Edin ; Altstädt, Volker:
Polymer Engineering : Metallisierte Faserverbundstrukturen; wie Kunststoffe zu alternativen Antriebstechnologien beitragen.
In: Jahresmagazin Ingenieurwissenschaften. (2014) . - pp. 20-22.

Schacht, Kristin ; Scheibel, Thomas:
Processing of recombinant spider silk proteins into tailor-made materials for biomaterials applications.
In: Current Opinion in Biotechnology. Vol. 29 (2014) . - pp. 62-69.
DOI: https://doi.org/10.1016/j.copbio.2014.02.015

Cestari, Sibele P. ; Mendes, Luis C. ; Altstädt, Volker ; Lopes, L. M. de A.:
Rheological Properties of Composites of Recycled High Density Polyethylene and Coffee Dregs.
2014
Event: NICE : 2nd International Conference on Bioinspired and Biobased Chemistry & Materials, 2014 , 2014 , Nice, France.
(Conference item: Conference , Speech )

Neuenfeldt, Martin ; Scheibel, Thomas:
Silks from Insects : From Natural Diversity to Applications.
In: Hofmann, Klaus H. (ed.): Insect Molecular Biology and Ecology. - Boca Raton : CRC Press, 2014 . - pp. 376-400

Heidebrecht, Aniela ; Scheibel, Thomas:
Spionik : Biotech Spinnenseide und Ihre Einsatzgebiete.
In: Bioforum. Vol. 37 (2014) Issue 2 . - pp. 20-22.

Flauder, Stefan ; Gbureck, Uwe ; Müller, Frank A.:
Structure and mechanical properties of β-TCP scaffolds prepared by ice-templating with preset ice front velocities.
In: Acta Biomaterialia. Vol. 10 (2014) Issue 12 . - pp. 5148-5155.
DOI: https://doi.org/10.1016/j.actbio.2014.08.020

Ußmüller, Thomas ; Hagelauer, Amelie ; Weigel, Robert:
Technologies for RFID sensors and sensor tags.
In: Roselli, Luca (ed.): Green RFID systems. - Cambridge : Cambridge University Press, 2014 . - pp. 76-115
DOI: https://doi.org/10.1017/CBO9781139343459.005

Heberle, Florian ; Brüggemann, Dieter:
Thermoeconomic Analysis of Hybrid Power Plant Concepts for Geothermal Combined Heat and Power Generation.
In: Energies. Vol. 7 (2014) Issue 7 . - pp. 4482-4497.
DOI: https://doi.org/10.3390/en7074482

Zeplin, Philip H. ; Berninger, A.-K. ; Maksimovikj, Nathalie C. ; van Gelder, P. ; Scheibel, Thomas ; Walles, H.:
Verbesserung der Biokompatibilität von Silikonimplantaten durch Spinnenseidenbeschichtung: Immunhistochemische Untersuchungen zum Einfluss auf die Kapselbildung.
In: Handchirurgie - Mikrochirurgie - Plastische Chirurgie. Vol. 46 (2014) Issue 6 . - pp. 336-341.
DOI: https://doi.org/10.1055/s-0034-1395558

Seeger, Herbert ; Langenbeck, Bernhard ; Sorhage, Jörg ; Krenkel, Walter ; Langhof, Nico:
Verfahren zur Herstellung einer Lamelle für eine Bremse beziehungsweise Kupplung sowie Lamelle.
EP 14 18 2716.2 (2014)

Wamser, Thomas ; Scheler, Sven ; Krenkel, Walter:
Verfahren zur Herstellung von keramischen Verbundwerkstoffen mittels Prepregs auf Basis von wässrigem Schlicker.
EP 15 750 299.8 (2014)

Altstädt, Volker:
Welcome Remarks by the Chairman of "The 29th International Conference of the Polymer Processing Society".
In: Altstädt, Volker ; Keller, Jan-Hendrik ; Fathi, Amir (ed.): PROCEEDINGS OF PPS-29 : The 29th International Conference of the Polymer Processing Society; Conference Papers. - Melville, NY : AIP Publishing, 2014 . - pp. 2-3 . - (AIP Conference Proceedings ; 1593 )
DOI: https://doi.org/10.1063/1.4873723

Rosemann, Bernd ; Brüning, Ralf:
Wertschöpfung anstelle Wertvernichtung : recyclinggerechtes Entwickeln mechatronischer Geräte.
In: Mechatronik. Vol. 122 (2014) Issue 1-2 . - pp. 40-41.

Schuldhaus, D. ; Dorn, S. ; Leutheuser, Heike ; Tallner, A. ; Klucken, J. ; Eskofier, Björn M.:
An adaptable inertial sensor fusion-based approach for energy expenditure estimation.
In: Goh, James (ed.): The 15th International Conference on Biomedical Engineering (ICBME). - Cham : Springer, 2014 . - pp. 124-127 . - (IFMBE Proceedings ; 43 )
DOI: https://doi.org/10.1007/978-3-319-02913-9_32

Kotti, Margarita ; Duffell, Lynsey D. ; Faisal, A. Aldo ; McGregor, Alison H.:
Analysis of knee osteoarthritis ground reaction vertical force during stair ascent : A neural network approach.
2014
Event: 7th World Congress of Biomechanics , 06.-11.07.2014 , Boston, MA.
(Conference item: Conference , Paper )

Leutheuser, Heike ; Gottschalk, Tristan ; Anneken, Lars ; Struck, Matthias ; Heuberger, Albert ; Arnold, Martin ; Achenbach, Stephan ; Eskofier, Björn M.:
Automatic ECG arrhythmia detection in real-time on Android-based mobile devices.
In: Novák, Daniel (ed.): Proceedings of International Conference on Mobile and Information Technologies in Medicine and Health. - Czech, Prague , 2014

Neishabouri, Ali ; Faisal, A. Aldo:
Axonal Noise as a Source of Synaptic Variability.
In: PLoS Computational Biology. Vol. 10 (2014) Issue 5 . - e1003615.
DOI: https://doi.org/10.1371/journal.pcbi.1003615

Ticchi, Alessandro ; Faisal, A. Aldo:
Bayes optimal spike adaptation predicts biophysical characteristics of neurons.
2014
Event: Computational and Systems Neuroscience, Cosyne 2014 , 27.02.-02.03.2014 , Salt Lake City, USA.
(Conference item: Conference , Paper )

Leutheuser, Heike ; Heyde, Christian ; Gollhofer, Albert ; Eskofier, Björn M.:
Comparison of a priori calibration models for respiratory inductance plethysmography during running.
In: 36th Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC) : proceedings. - Piscataway, NJ : IEEE, 2014 . - pp. 6393-6396
DOI: https://doi.org/10.1109/EMBC.2014.6945091

Gavriel, Constantinos ; Faisal, A. Aldo:
A Comparison of Day-Long Recording Stability and Muscle Force Prediction between BSN-Based Mechanomyography and Electromyography.
In: 2014 11th International Conference on Wearable and Implantable Body Sensor Networks (BSN). - Piscataway, NJ : IEEE, 2014 . - pp. 69-74
DOI: https://doi.org/10.1109/BSN.2014.23

Leutheuser, Heike ; Gradl, Stefan ; Kugler, Patrick ; Anneken, Lars ; Arnold, Martin ; Achenbach, Stephan ; Eskofier, Björn M.:
Comparison of real-time classification systems for arrhythmia detection on Android-based mobile devices.
In: 36th Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC) : proceedings. - Piscataway, NJ : IEEE, 2014 . - pp. 2690-2693
DOI: https://doi.org/10.1109/EMBC.2014.6944177

Kotti, Margarita ; Duffell, Lynsey D. ; Faisal, A. Aldo ; McGregor, Alison H.:
The Complexity of Human Walking : A Knee Osteoarthritis Study.
In: PLoS One. Vol. 9 (2014) Issue 9 . - e107325.
DOI: https://doi.org/10.1371/journal.pone.0107325

Faisal, A. Aldo ; Sylaidi, Anastasia ; Rodríguez, M.:
Developing a Novel fMRI-Compatible Motion Tracking System for Haptic Motor Control Experiments.
In: Londral, Ana Rita ; Encarnação, Pedro (ed.): Proceedings of the 2nd International Congress on Neurotechnology, Electronics and Informatics : NEUROTECHNIX 2014. - SCITEPRESS, 2014 . - pp. 25-30
DOI: https://doi.org/10.5220/0005094700250030

Fruhstorfer, Jens ; Schafföner, Stefan ; Aneziris, Christos G.:
Dry ball mixing and deagglomeration of alumina and zirconia composite fine powders using a bimodal ball size distribution.
In: Ceramics International. Vol. 40 (2014) Issue 9, Part B . - pp. 15293-15302.
DOI: https://doi.org/10.1016/j.ceramint.2014.07.027

Lourenço, P. Rente ; Abbott, W. W. ; Faisal, A. Aldo:
EEG and Eye-Tracking Integration for Ocular Artefact Correction.
In: Londral, Ana Rita ; Encarnação, Pedro (ed.): Proceedings of the 2nd International Congress on Neurotechnology, Electronics and Informatics : NEUROTECHNIX 2014. - SCITEPRESS, 2014 . - pp. 79-86
DOI: https://doi.org/10.5220/0005094600790086

Gabsteiger, Florian ; Leutheuser, Heike ; Reis, Pedro ; Lochmann, Matthias ; Eskofier, Björn M.:
ICA-based reduction of electromyogenic artifacts in EEG data : Comparison with and without EMG data.
In: 36th Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC) : proceedings. - Piscataway, NJ : IEEE, 2014 . - pp. 3861-3864
DOI: https://doi.org/10.1109/EMBC.2014.6944466

Werner, Joern ; Aneziris, Christos G. ; Schafföner, Stefan:
Influence of porosity on Young's modulus of carbon-bonded alumina from room temperature up to 1450°C.
In: Ceramics International. Vol. 40 (2014) Issue 9, Part A . - pp. 14439-14445.
DOI: https://doi.org/10.1016/j.ceramint.2014.07.013

Leutheuser, Heike ; Doelfel, Sina ; Schuldhaus, Dominik ; Reinfelder, Samuel ; Eskofier, Björn M.:
Performance comparison of two step segmentation algorithms using different step activities.
In: 2014 11th International Conference on Wearable and Implantable Body Sensor Networks (BSN) : proceedings. - Piscataway, NJ : IEEE, 2014 . - pp. 143-148
DOI: https://doi.org/10.1109/BSN.2014.37

Fara, Salvatore ; Gavriel, Constantinos ; Vikram, Chandra Sen ; Faisal, A. Aldo:
Prediction of Arm End-Point Force Using Multi-channel MMG.
In: 2014 11th International Conference on Wearable and Implantable Body Sensor Networks (BSN). - Piscataway, NJ : IEEE, 2014 . - pp. 27-32
DOI: https://doi.org/10.1109/BSN.2014.24

Heyde, Christian ; Leutheuser, Heike ; Eskofier, Björn M. ; Roecker, Kai ; Gollhofer, Albert:
Respiratory inductance plethysmography : a rationale for validity during exercise.
In: Medicine & Science in Sports & Exercise. Vol. 46 (2014) Issue 3 . - pp. 488-495.
DOI: https://doi.org/10.1249/mss.0000000000000130

Neishabouri, Ali ; Faisal, A. Aldo:
Saltatory conduction in unmyelinated axons : clustering of Na+ channels on lipid rafts enables micro-saltatory conduction in C-fibers.
In: Frontiers in Neuroanatomy. Vol. 8 (2014) . - 109.
DOI: https://doi.org/10.3389/fnana.2014.00109

Gabsteiger, Florian ; Leutheuser, Heike ; Reis, Pedro ; Lochmann, Matthias ; Eskofier, Björn M.:
SVM for semi-automatic selection of ICA components of electromyogenic artifacts in EEG data.
In: Goh, James (ed.): The 15th International Conference on Biomedical Engineering (ICBME). - Cham : Springer, 2014 . - pp. 132-135 . - (IFMBE Proceedings ; 43 )
DOI: https://doi.org/10.1007/978-3-319-02913-9_34

Tobola, Andreas ; Korpok, Oliver ; Leutheuser, Heike ; Schmitz, Björn ; Hofmann, Christian ; Struck, Matthias ; Weigand, Christian ; Eskofier, Björn M. ; Heuberger, Albert ; Fischer, Georg:
System design impacts on battery runtime of wearable medical sensors.
In: Novák, Daniel (ed.): Proceedings of International Conference on Mobile and Information Technologies in Medicine and Health. - Czech, Prague , 2014 . - pp. 1-4

Faisal, A. Aldo ; Peltonen, Jaakko ; Georgii, Elisabeth ; Rung, Johan ; Kaski, Samuel:
Toward Computational Cumulative Biology by Combining Models of Biological Datasets.
In: PLoS One. Vol. 9 (2014) Issue 11 . - e113053.
DOI: https://doi.org/10.1371/journal.pone.0113053

Schuldhaus, Dominik ; Leutheuser, Heike ; Eskofier, Björn M.:
Towards big data for activity recognition : a novel database fusion strategy.
In: Proceedings of the 9th International Conference on Body Area Networks (BodyNets). - Brussels, Belgium : ICST, 2014 . - pp. 97-103
DOI: https://doi.org/10.4108/icst.bodynets.2014.256946

Kotti, Margarita ; Duffell, Lynsey D. ; Faisal, A. Aldo ; McGregor, Alison H.:
Towards predicting the effectiveness of knee surgery for knee osteoarthritis patients.
2014
Event: Young Researchers’ Futures Meeting : Engineering for Orthopaedic Applications , 15.-17.09.2014 , Leeds, UK.
(Conference item: Conference , Paper )

Haber, David ; Thomik, Andreas A. C. ; Faisal, A. Aldo:
Unsupervised Time Series Segmentation for High-Dimensional Body Sensor Network Data Streams.
In: 2014 11th International Conference on Wearable and Implantable Body Sensor Networks (BSN). - Piscataway, NJ : IEEE, 2014 . - pp. 121-126
DOI: https://doi.org/10.1109/BSN.2014.34

Behbahani, Feryal M. P. ; Faisal, A. Aldo:
Visual categorization reflects second order generative statistics.
2014
Event: Computational and Systems Neuroscience, Cosyne 2014 , 27.02.-02.03.2014 , Salt Lake City, USA.
(Conference item: Conference , Paper )

2013

Krenkel, Walter:
Ceramic Matrix Composites for Lightweight and High Temperature Applications.
2013
Event: 5th International Symposium on Advanced Ceramics (ISAC-5) , 09.–12.12.2013 , Wuhan, China.
(Conference item: Conference , Speech )

Krenkel, Walter:
Development of Ceramic Jackets for the Lifetime Extension of Metal Pipes in Power Plants.
2013
Event: 4th International Symposium on Advanced Ceramics and Technology for Sustainable Energy Applications torward a Low Carbon Society (ACTSEA 2013) , 10.-13.11.2013 , Taipei, Taiwan.
(Conference item: Conference , Speech )

Wamser, Thomas ; Scheler, Sven ; Krenkel, Walter:
Methode zur Herstellung eines oxidkeramischen Verbundmaterials und einer Faservorform.
EP 2 848 599 B1 (2013)

Krenkel, Walter:
Carbon-Ceramic Brakes : Current Status and Perspectives.
2013
Event: SAE 2012, Brake Colloquium & Exhibition - 30th Annual , 23.-26.09.2012 , San Diego, USA.
(Conference item: Conference , Speech )

Krenkel, Walter:
CMC Braking Materials : Current Status and Perspectives.
2013
Event: 8th International Conference on High Temperature Ceramic Matrix Composites (HT-CMC 8) , 22.-26.09.2013 , Xi’an, China.
(Conference item: Conference , Speech )

Krenkel, Walter:
Bruchzähe Keramik : Zwischen Vision und Wirklichkeit.
2013
Event: Wissenschafts-Innovationen im Wandel : Symposium der Karl-Heinz-Beckurts-Stiftung , 18.-19. März 2013 , Karlsruhe, Deutschland.
(Conference item: Conference , Speech )

Krenkel, Walter:
Ceramic Composites for High Performance Applications.
2013
Event: 4th International Conference on Recent Advances in Composite Materials (ICRACM 2013) , 18.-21.02.2013 , Goa, Indien.
(Conference item: Conference , Speech )

Krenkel, Walter:
Lifetime Extension of Metal Pipes by Ceramic Jackets.
2013
Event: 37th International Conference and Exposition on Advanced Ceramics and Composites (ICACC’13) , 27.01.-01.02.2013 , Daytona Beach, USA.
(Conference item: Conference , Speech )

Schmidt, Jan Philipp ; Tran, Hai Yen ; Richter, Jan ; Ivers-Tiffée, Ellen ; Wohlfahrt-Mehrens, Margret:
Analysis and prediction of the open circuit potential of lithium-ion cells.
In: Journal of Power Sources. Vol. 239 (2013) . - pp. 696-704.
DOI: https://doi.org/10.1016/j.jpowsour.2012.11.101

Pour Mousavi, Mehran ; Wojnowski, Maciej ; Agethen, Roman ; Weigel, Robert ; Hagelauer, Amelie:
Antenna Array in eWLB for 61 GHz FMCW Radar.
In: 2013 Asia-Pacific Microwave Conference. - Piscataway, NJ : IEEE, 2013 . - pp. 310-312
DOI: https://doi.org/10.1109/APMC.2013.6695129

Pour Mousavi, Mehran ; Wojnowski, Maciej ; Agethen, Roman ; Sommer, G. ; Weigel, Robert ; Hagelauer, Amelie:
Antenna Design and Characterization for a 61 GHz Transceiver in eWLB Package.
In: 2013 European Microwave Integrated Circuit Conference. - Piscataway, NJ : IEEE, 2013 . - pp. 444-447

Krenkel, Walter:
Ceramic Composites for High Temperature Applications.
2013
Event: XXI Congresso AIV : Associazione Italiana di Scienza e Tecnologia , 15.- 17.05.2013 , Catania, Italien.
(Conference item: Conference , Speech )

Delpero, Christian ; Motz, Günter ; Krenkel, Walter:
Characterisation of SiCN Coatings on Substrates of Hf and Nb.
In: Journal of Ceramic Science and Technology. Vol. 4 (2013) Issue 2 . - pp. 105-112.
DOI: https://doi.org/10.4416/JCST2012-00041

Kubota, Yuuki ; Fukuda, Kohei ; Hatta, Hiroshi ; Krenkel, Walter ; Langhof, Nico:
Defect and deformation mechanisms of carbon fiber reinforced phenolic ablators.
2013
Event: 29th International Symposium on Space Technology and Science (ISTS 2013) , 02.-09.06.2013 , Nagoya-Aichi, Japan.
(Conference item: Conference , Paper )

Kuznetsov, Volodymyr:
Direct Force Measurements on the Colloidal Scale: From Modified Electrodes to Particle Manipulation.
Bayreuth , 2013 . - 173 p.
( Doctoral thesis, 2013 , Universität Bayreuth, Fakultät für Biologie, Chemie und Geowissenschaften)

Weiß, Janina:
Durch Impfungen beeinflussbare Krankheitsdynamiken.
2013
( Bachelor thesis, 2013 , Universität Bayreuth, Fakultät für Mathematik, Physik und Informatik, Lehrstuhl für Ingenieurmathematik)

Krenkel, Walter:
Faserverbundwerkstoffe mit keramischer Matrix : Aktueller Entwicklungsstand und Anwendungspotenziale.
2013
Event: Karlsruher Werkstoffkolloquium , 7. Mai 2013 , Karlsruhe, Deutschland.
(Conference item: Conference , Speech )

Rosemann, Bernd:
Fertigungsverfahren Bürstspanen : potenziale eines hochflexiblen Bearbeitungsverfahrens.
In: Jahrbuch Schleifen, Honen, Läppen und Polieren. Vol. 66 (2013) . - pp. 376-386.

Pour Mousavi, Mehran ; Wojnowski, Maciej ; Agethen, Roman ; Weigel, Robert ; Hagelauer, Amelie:
The Impact of embedded wafer level BGA Package on the Antenna Performance.
In: 2013 IEEE-APS Topical Conference on Antennas and Propagation in Wireless Communications. - Piscataway, NJ : IEEE, 2013 . - pp. 828-831
DOI: https://doi.org/10.1109/APWC.2013.6624913

Strößner, Johannes ; Konrad, Christian ; Brunner, Martin ; Völkl, Rainer ; Glatzel, Uwe:
Influence of casting surface on creep behaviour of thin-wall Ni-base superalloy Inconel100.
In: Journal of Materials Processing Technology. Vol. 213 (2013) Issue 5 . - pp. 722-727.
DOI: https://doi.org/10.1016/j.jmatprotec.2012.11.024

Bensch, Matthias ; Konrad, Christian ; Fleischmann, Ernst ; Rae, Catherine M. F. ; Glatzel, Uwe:
Influence of oxidation on near-surface γ' fraction and resulting creep behaviour of single crystal Ni-base superalloy M247LC SX.
In: Materials Science and Engineering: A. Vol. 577 (2013) . - pp. 179-188.
DOI: https://doi.org/10.1016/j.msea.2013.04.032

Banduhn, Carolin ; Schlüchtermann, Jörg:
Klinisches Risikomanagement in der Kosten-Nutzen-Betrachtung.
In: Das Gesundheitswesen. Vol. 75 (2013) Issue 5 . - pp. 281-287.
DOI: https://doi.org/10.1055/s-0033-1343440

Krenkel, Walter:
MAX Phase Containing CMCs Fabricated by Reactive Melt Infiltration.
2013
Event: 10th Pacific Rim Conference on Ceramic and Glass Technology , 02.-07.06.2013 , San Diego, USA.
(Conference item: Conference , Speech )

Neubauer, Martin Peter ; Blüm, Claudia ; Agostini, Elisa ; Engert, Julia ; Scheibel, Thomas ; Fery, Andreas:
Micromechanical characterization of spider silk particles.
In: Biomaterials Science. Vol. 1 (2013) Issue 11 . - pp. 1160-1165.
DOI: https://doi.org/10.1039/c3bm60108k

Seler, Ernst ; Wojnowski, Maciej ; Weigel, Robert ; Hagelauer, Amelie:
New Simulation Procedure for Accurate Package Modeling Considering Chip-Package Interaction.
In: 2013 IEEE 22nd Conference on Electrical Performance of Electronic Packaging and Systems. - Piscataway, NJ : IEEE, 2013 . - pp. 43-46
DOI: https://doi.org/10.1109/EPEPS.2013.6703463

Krenkel, Walter:
Oxide and Non-Oxide Ceramic Matrix Composites for Lightweight and High Temperature Applications.
2013
Event: International Forum on Advanced Ceramics and Composites , 19.-21.09.2013 , Shanghai, China.
(Conference item: Conference , Speech )

Wamser, Thomas ; Scheler, Sven ; Krenkel, Walter:
Oxide Ceramic Composite Material and Fiber Preform for its Production.
EP 2848599 (2013)

Majewski, Alexander P. ; Stahlschmidt, Ullrich ; Jérôme, Valérie ; Freitag, Ruth ; Müller, Axel H. E. ; Schmalz, Holger:
PDMAEMA-Grafted Core-Shell-Corona Particles for Nonviral Gene Delivery and Magnetic Cell Separation.
In: Biomacromolecules. Vol. 14 (2013) Issue 9 . - pp. 3081-3090.
DOI: https://doi.org/10.1021/bm400703d

Langhof, Nico ; Rabenstein, M. ; Kunz, Daniel A. ; Hegermann, R. ; Goetz, P. ; Yarim, R. ; Rosenlöcher, Jens ; Habath, Rebecca ; Krenkel, Walter:
The Performance of C-Fiber Reinforced Ceramic Friction Pads (CMCs).
In: Abendroth, Harald (Hrsg.): Proceedings of EuroBrake. - London : FISITA, 2013

Manzoni, Anna M. ; Daoud, Haneen ; Völkl, Rainer ; Glatzel, Uwe ; Wanderka, Nelia:
Phase separation in equiatomic AlCoCrFeNi high-entropy alloy.
In: Ultramicroscopy. Vol. 132 (2013) . - pp. 212-215.
DOI: https://doi.org/10.1016/j.ultramic.2012.12.015

Cestari, Sibele P. ; Mendes, Luis C. ; da Silva, Daniela França ; Chimanowsky, Jorge Pereira ; Altstädt, Volker ; Demchuk, Vitaly ; Lang, Anneliese ; Leonhardt, Rodrigo Gheno ; Keller, Jan-Hendrik:
Properties of recycled high density polyethylene and coffee dregs composites.
In: Polímeros : Ciência e Tecnologia. Vol. 23 (2013) Issue 6 . - pp. 733-737.
DOI: https://doi.org/10.4322/polimeros.2014.011

Schreppel, Christina:
Die Rolle der Gametozyten und einer nicht-perfekten Impfung auf die Verbreitung von Malaria.
Bayreuth , 2013
( Bachelor thesis, 2013 , Universität Bayreuth, Fakultät für Mathematik, Physik und Informatik, Lehrstuhl für Ingenieurmathematik)

Scheibel, Thomas:
Spinnenseide Biotech-Fasern mit naturidentischer Belastbarkeit.
In: chemie & more. (2013) Issue 4 . - pp. 3-5.

Terock, Michael ; Fleischmann, Ernst ; Hochmuth, Christian ; Völkl, Rainer ; Glatzel, Uwe:
Synthesis and characterization of a Pt–Al–Cr–Ni γ/γ′-coating on the Ni-based superalloy CMSX‐4.
In: Surface and Coatings Technology. Vol. 236 (2013) . - pp. 347-352.
DOI: https://doi.org/10.1016/j.surfcoat.2013.10.011

Hagelauer, Amelie:
Verlustmechanismen in BAW-Komponenten für Mobilfunkanwendungen.
Erlangen-Nürnberg , 2013 . - XI, 127 p.
( Doctoral thesis, 2013 , Universität Erlangen-Nürnberg)

Schiewer, Gesine Lenore:
Von der "unverzichtbaren Kernkraft" zum "alternativlosen Atomausstieg" : Kognitionslinguistische Überlegungen zur gesellschaftlichen Deutung von Technik und Technikwissen in unternehmerischen und anderen Kontexten.
In: Ballod, Matthias ; Weber, Tilo (ed.): Autarke Kommunikation : Wissenstransfer in Zeiten von Fundamentalismen. - Frankfurt am Main : Lang, 2013 . - pp. 77-92

Rosemann, Bernd:
Werkstrom : unternehmensübergreifende Produktionsoptimierung am Beispiel der effizienten Fertigung individueller Verpackungshohlkörper.
In: Jahresbericht Fraunhofer-Institut für Produktionstechnik und Automatisierung, IPA. (2013) . - p. 87.

Kotti, Margarita ; Duffell, Lynsey D. ; Faisal, A. Aldo ; McGregor, Alison H.:
Analysis of knee osteoarthritis data via bioinformatics tools.
2013
Event: 1st International Environmental 'Omics Synthesis Conference , 09.-11.09.2013 , Cardiff, UK.
(Conference item: Conference , Paper )

Vicente, Alexandre P. ; Faisal, A. Aldo:
Calibration of kinematic body sensor networks : Kinect-based gauging of data gloves "in the wild".
In: 2013 IEEE International Conference on Body Sensor Networks (BSN). - Piscataway, NJ : IEEE, 2013 . - pp. 1-6
DOI: https://doi.org/10.1109/BSN.2013.6575526

Schuldhaus, Dominik ; Leutheuser, Heike ; Eskofier, Björn M.:
Classification of daily life activities by decision level fusion of inertial sensor data.
In: Proceedings of the 8th International Conference on Body Area Networks : BodyNets '13. - Brussels, Belgium : Institute for Computer Sciences, Social-Informatics and Telecommunications Engineering, 2013 . - pp. 77-82
DOI: https://doi.org/10.4108/icst.bodynets.2013.253534

Leutheuser, Heike ; Gabsteiger, Florian ; Hebenstreit, Felix ; Reis, Pedro ; Lochmann, Matthias ; Eskofier, Björn M.:
Comparison of the AMICA and the InfoMax algorithm for the reduction of electromyogenic artifacts in EEG data.
In: 35th Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC) : proceedings. - Piscataway, NJ : IEEE, 2013 . - pp. 6804-6807
DOI: https://doi.org/10.1109/EMBC.2013.6611119

Kotti, Margarita ; Duffell, Lynsey D. ; Faisal, A. Aldo ; McGregor, Alison H.:
Detecting knee osteoarthritis with statistical and machine learning approaches.
2013
Event: Medical Engineering Centres (MEC) annual meeting , 03.-04.09.2013 , Ascot, UK.
(Conference item: Conference , Paper )

Sengupta, Biswa ; Faisal, A. Aldo ; Laughlin, Simon B. ; Niven, Jeremy E.:
The Effect of Cell Size and Channel Density on Neuronal Information Encoding and Energy Efficiency.
In: Journal of Cerebral Blood Flow & Metabolism. Vol. 33 (2013) Issue 9 . - pp. 1465-1473.
DOI: https://doi.org/10.1038/jcbfm.2013.103

Abbott, William W. ; Thomik, Andreas A. C. ; Faisal, A. Aldo:
Embodied attention for gaze analysis in daily life activities.
In: Pfeiffer, Thies ; Essig, Kai (ed.): Proceedings of the First International Workshop on Solutions for Automatic Gaze-Data Analysis 2013 (SAGA 2013). - Bielefeld , 2013 . - pp. 45-46
DOI: https://doi.org/10.2390/biecoll-saga2013_12

Schafföner, Stefan ; Aneziris, Christos G. ; Berek, Harry ; Hubálková, Jana ; Priese, Angelika:
Fused calcium zirconate for refractory applications.
In: Journal of the European Ceramic Society. Vol. 33 (2013) Issue 15-16 . - pp. 3411-3418.
DOI: https://doi.org/10.1016/j.jeurceramsoc.2013.07.008

Sim, Nigel ; Gavriel, Constantinos ; Abbott, William W. ; Faisal, A. Aldo:
The head mouse : Head gaze estimation "In-the-Wild" with low-cost inertial sensors for BMI use.
In: 6th International IEEE/EMBS Conference on Neural Engineering (NER) : Proceedings. - Piscataway, NJ : IEEE, 2013 . - pp. 735-738
DOI: https://doi.org/10.1109/NER.2013.6696039

Leutheuser, Heike ; Eskofier, Björn M.:
Heart rate variability during physical exercise.
In: International Journal of Computer Science in Sport. Vol. 12 (2013) Issue 1 . - pp. 61-68.

Leutheuser, Heike ; Schuldhaus, Dominik ; Eskofier, Björn M.:
Hierarchical, multi-sensor based classification of daily life activities : Comparison with state-of-the-art algorithms using a benchmark dataset.
In: PLoS One. Vol. 8 (2013) Issue 10 . - e75196.
DOI: https://doi.org/10.1371/journal.pone.0075196

Werner, Jörn ; Aneziris, Christos G. ; Schafföner, Stefan ; Fruhstorfer, J. ; Oppelt, M. ; Dudczig, S.:
Impulse excitation measurement up to 1600॰C : An advanced analysis technique for refractories.
In: Refractories for industrials. - Höhr-Grenzhausen : ECREF, 2013 . - pp. 138-141

Abbott, William W. ; Faisal, A. Aldo:
Large ﬁeld study of ultra-low cost BMI using intention decoding from eye movements for closed loop control.
2013
Event: Neuroscience 2013, Society for Neuroscience Annual Meeting , 09.-13.11.2013 , San Diego, CA.
(Conference item: Conference , Paper )

Abbott, William W. ; Faisal, A. Aldo:
Large-field study of gaze based ultra low-cost, non-invasive task level BMI.
In: Pfeiffer, Thies ; Essig, Kai (ed.): Proceedings of the First International Workshop on Solutions for Automatic Gaze-Data Analysis 2013 (SAGA 2013). - Bielefeld , 2013 . - pp. 47-48
DOI: https://doi.org/10.2390/biecoll-saga2013_13

Abbott, William W. ; Zucconi, Alan ; Faisal, A. Aldo:
Large-field study of ultra low-cost, non-invasive task level BMI.
In: 6th International IEEE/EMBS Conference on Neural Engineering (NER) : Proceedings. - Piscataway, NJ : IEEE, 2013 . - pp. 97-100
DOI: https://doi.org/10.1109/NER.2013.6695880

Kotti, Margarita ; Duffell, Lynsey D. ; Faisal, A. Aldo ; McGregor, Alison H.:
A PPCA-Bayesian approach for knee osteoarthritis classiﬁcation using ground reaction reaction forces.
2013
Event: 19th Congress of the European Society of Biomechanics , 25.-28.08.2013 , Patras, Greece.
(Conference item: Conference , Paper )

Thomik, Andreas A. C. ; Haber, David ; Faisal, A. Aldo:
Real-time movement prediction for improved control of neuroprosthetic devices.
In: 6th International IEEE/EMBS Conference on Neural Engineering (NER) : Proceedings. - Piscataway, NJ : IEEE, 2013 . - pp. 625-628
DOI: https://doi.org/10.1109/NER.2013.6696012

Fara, Salvatore ; Vikram, Chandra Sen ; Gavriel, Constantinos ; Faisal, A. Aldo:
Robust, ultra low-cost MMG system with brain-machine-interface applications.
In: 6th International IEEE/EMBS Conference on Neural Engineering (NER) : Proceedings. - Piscataway, NJ : IEEE, 2013 . - pp. 723-726
DOI: https://doi.org/10.1109/NER.2013.6696036

Traxdorf, Maximilian ; Gradl, Stefan ; Angerer, Florian ; Iro, Heinrich ; Leutheuser, Heike ; Eskofier, Björn M. ; Lauten, Juliane ; Kugler, Patrick:
Schlafstadienbestimmung mit Hilfe bewegungsbasierter Sensortechnologie.
In: Deutsche Gesellschaft für Hals-Nasen-Ohren-Heilkunde, Kopf- und Hals-Chirurgie (ed.): Proceedings of the 84th Annual Meeting of the German Society of Oto-Rhino-Laryngology, Head and Neck Surgery. - Düsseldorf : German Medical Science GMS Publishing House, 2013 . - p. 158
DOI: https://doi.org/10.3205/13hnod723

Gradl, Stefan ; Leutheuser, Heike ; Kugler, Patrick ; Biermann, Teresa ; Kreil, Sebastian ; Kornhuber, Johannes ; Bergner, Matthias ; Eskofier, Björn M.:
Somnography using unobtrusive motion sensors and Android-based mobile phones.
In: 35th Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC) : proceedings. - Piscataway, NJ : IEEE, 2013 . - pp. 1182-1185
DOI: https://doi.org/10.1109/EMBC.2013.6609717

Kotti, Margarita ; Duffell, Lynsey D. ; Faisal, A. Aldo ; McGregor, Alison H.:
Towards automatically assessing osteoarthritis severity by regression trees & SVMs.
2013
Event: XXIV Congress of the International Society of Biomechanics , 04.-09.08.2013 , Natal, Brazil.
(Conference item: Conference , Paper )

Lowery, Cristobal ; Faisal, A. Aldo:
Towards efficient, personalized anesthesia using continuous reinforcement learning for propofol infusion control.
In: 6th International IEEE/EMBS Conference on Neural Engineering (NER) : Proceedings. - Piscataway, NJ : IEEE, 2013 . - pp. 1414-1417
DOI: https://doi.org/10.1109/NER.2013.6696208

Abbott, William W. ; Faisal, A. Aldo:
Ultra low-cost 3D gaze estimation : an intuitive high information throughput complement to direct Brain-Machine-Interfaces.
In: Pfeiffer, Thies ; Essig, Kai (ed.): Proceedings of the First International Workshop on Solutions for Automatic Gaze-Data Analysis 2013 (SAGA 2013). - Bielefeld , 2013 . - pp. 49-50
DOI: https://doi.org/10.2390/biecoll-saga2013_14

Abbott, William W. ; Faisal, A. Aldo:
Ultra-low cost 3D gaze tracking : the non-invasive approach to neuroprosthetics.
2013
Event: 17th European Conference on Eye Movements , Lund, Sweden , 11.-16.08.2013.
(Conference item: Conference , Paper )

Bothe, Melanie K. ; Dickens, Luke ; Reichel, Katrin ; Tellmann, Arn ; Ellger, Björn ; Westphal, Martin ; Faisal, A. Aldo:
The use of reinforcement learning algorithms to meet the challenges of an artificial pancreas.
In: Expert Review of Medical Devices. Vol. 10 (2013) Issue 5 . - pp. 661-673.
DOI: https://doi.org/10.1586/17434440.2013.827515

Behbahani, Feryal M. P. ; Faisal, A. Aldo:
Visual categorisation is Bayesian and not Discriminative in humans.
2013
Event: Neuroscience 2013, Society for Neuroscience Annual Meeting , 09.-13.11.2013 , San Diego, CA.
(Conference item: Conference , Paper )

Gavriel, Constantinos ; Faisal, A. Aldo:
Wireless kinematic body sensor network for low-cost neurotechnology applications "in-the-wild".
In: 6th International IEEE/EMBS Conference on Neural Engineering (NER) : Proceedings. - Piscataway, NJ : IEEE, 2013 . - pp. 1279-1282
DOI: https://doi.org/10.1109/NER.2013.6696174

2012

Daeschlein, Christian ; Gutmann, Peter ; Hahn, Klaus ; Ruckdäschel, Holger:
Expandable Polymer Granule Obtained from Polymer Component, Physical Blowing Agent Component, and Flame Retardant System Useful in Foam Molded Part, Foam Block or Composite Molded Part in e.g. Furniture Construction : Flammgeschütztes expandierbares Polymergranulat.
DE102012217668A1 (2012)

Bellin, Ingo ; Grässel, Georg ; Hahn, Klaus ; Ruckdäschel, Holger ; Sandler, Jan K. W. ; Terrenoire, Alexandre ; Weber, Martin:
Expandable Temperature-Resistant Styrene Copolymers : EXPANDIERBARE TEMPERATURBESTÄNDIGE STYROL-COPOLYMERE.
WO2013030197A1 (2012)

Altstädt, Volker ; Döring, Manfred ; Henningsen, Michael ; Kaffee, Achim ; Krämer, Johannes ; Schmidt, Alexander ; Stumbe, Jean-Francois ; Zang, Lin:
Herstellung von gehärteten Epoxidharzen mit flammhemmenden Phosphonaten : Production of hardened epoxide resin with flame-retardant phosphonates ; Production of hardened epoxy resins having flame-retarding phosphonates ; Production of cured epoxy resins with flame-retardant phosphonates.
CN103619994A (2012)

Bellin, Ingo ; Boy, Elmar ; Daeschlein, Christian ; Hahn, Christoph ; Hahn, Klaus ; Hoeld, Tobias ; Igea-Ruiz, Juan-Manuel ; Merkel, Peter ; Ruckdäschel, Holger ; Schall, Herbert ; Sommer, Maria-Kristin:
Heat-Resistant and Flame-Retardant Extruded Foam Made of Styrene Copolymers.
US2012283345A1 (2012)

Bellin, Ingo ; Boy, Elmar ; Daeschlein, Christian ; Hahn, Christoph ; Hahn, Klaus ; Hoeld, Tobias ; Igea-Ruiz, Juan-Manuel ; Merkel, Peter ; Ruckdäschel, Holger ; Schall, Herbert ; Sommer, Maria-Kristin:
Heat-Deflection-Resistant and Flame-Retardant Extruded Foam Made of Styrene Copolymers : WÄRMEFORMBESTÄNDIGER UND FLAMMGESCHÜTZTER EXTRUSIONSSCHAUMSTOFF AUS STYROLCOPOLYMEREN.
WO2012150249A1 (2012)

Krenkel, Walter:
Design of Hybrid Ceramic-Metal Pipes for Power Plants.
2012
Event: 10th International Symposium on Ceramic Materials and Components for Energy and Environment Applications (CMCee ’12) , 20.-23.05.2012 , Dresden, Deutschland.
(Conference item: Conference , Speech )

Krenkel, Walter:
Ceramic Matrix Composites for High Performance Applications.
2012
Event: International Symposium on New Frontier of Advanced Si-Based Ceramics and Composites : ISASC 2012 , 25.-28.03.2012 , Seoul, Korea.
(Conference item: Conference , Lecture )

Krenkel, Walter:
Ceramic Matrix Composites via Reactive Melt Infiltration Processes.
2012
Event: National Institute of Advanced Industrial Science and Technology (AIST) , 24.02.2012 , Nagoya, Japan.
(Conference item: Conference , Speech )

Krenkel, Walter:
Carbon Fiber Reinforced Composites Manufactured by Reactive Melt Infiltration Processes.
2012
Event: 36th International Conference on Advanced Ceramics and Composites , 22.-27.01.2012 , Daytona Beach, USA.
(Conference item: Conference , Speech )

Krenkel, Walter:
Status of Carbon/Ceramic Brakes : Properties, Production and Perspectives.
2012
Event: 36th International Conference on Advanced Ceramics and Composites , 22.-27.01.2012 , Daytona Beach, USA.
(Conference item: Conference , Speech )

Kempf, M. ; Skrabala, Otto ; Altstädt, Volker:
Acoustic emission analysis for quantitative characterisation of the damage behaviour in fibre reinforced composites under static and dynamic loading.
In: Composites at Venice : : 15th European Conference on Composite Materials, ECCM 15. - Venice , 2012

Krenkel, Walter:
C/SiC Materials for High Performance Brakes : Current Status and Future Challenges.
2012
Event: Eurobrake 2012 , 16.-18.04.2012 , Dresden, Deutschland.
(Conference item: Conference , Speech )

Schütz, Adelheid ; Günthner, Martin ; Motz, Günter ; Greißl, Oliver ; Glatzel, Uwe:
Characterisation of novel precursor-derived ceramic coatings with glass filler particles on steel substrates.
In: Surface and Coatings Technology. Vol. 207 (2012) . - pp. 319-327.
DOI: https://doi.org/10.1016/j.surfcoat.2012.07.013

Njuhovic, E. ; Bradshaw, I. ; Neidhardt, F. ; Altstädt, Volker:
Chemical surface treatment of pes modified epoxy resin and the influence of its morphology on the adhesion of metal coating.
2012
Event: 15th European Conference on Composite Materials : ECCM 15 , 24.-28.06.2012 , Venice, Italy.
(Conference item: Conference , Speech )

Freiberger, Stefan ; Rosemann, Bernd:
CNC-Produktion.
In: Frank, Rieg ; Steinilper, Rolf (ed.): Handbuch Konstruktion. - München : Hanser, 2012 . - pp. 873-885

Blüm, Claudia ; Scheibel, Thomas:
Control of Drug Loading and Release Properties of Spider Silk Sub-Microparticles.
In: BioNanoScience. Vol. 2 (2012) Issue 2 . - pp. 67-74.
DOI: https://doi.org/10.1007/s12668-012-0036-7

Konrad, Christian ; Völkl, Rainer ; Glatzel, Uwe:
Determination of Oxygen Diffusion Along Nickel/Zirconia Phase Boundaries by Internal Oxidation.
In: Oxidation of Metals. Vol. 77 (2012) Issue 3 . - pp. 149-165.
DOI: https://doi.org/10.1007/s11085-011-9278-y

Majewski, Alexander P. ; Schallon, Anja ; Jérôme, Valérie ; Freitag, Ruth ; Müller, Axel H. E. ; Schmalz, Holger:
Dual-Responsive Magnetic Core-Shell Nanoparticles for Nonviral Gene Delivery and Cell Separation.
In: Biomacromolecules. Vol. 13 (2012) Issue 3 . - pp. 857-866.
DOI: https://doi.org/10.1021/bm2017756

Neumeyer, Thomas ; Kempf, Manuel ; Krämer, Johannes ; Wolff-Fabris, Felipe ; Altstädt, Volker:
Duromere Matrixsysteme : Leichter in der Luft, im Wind und auf der Straße.
In: Kunststoffe. Vol. 102 (2012) Issue 11 . - pp. 72-77.

Freimark, Denise ; Jérôme, Valérie ; Freitag, Ruth:
Effect of process parameters and product-host-interaction on hVEGFA-production by recombinant Chinese hamster ovary cells.
In: Biotechnology Progress. Vol. 28 (2012) Issue 3 . - pp. 762-772.
DOI: https://doi.org/10.1002/btpr.1524

Behme, Sven ; Schartel, Bernhard ; Bykov, Y. ; Ciesielski, Michael ; Döring, M. ; Fischer, O. ; Pospiech, D. ; Köppl, T. ; Altstädt, Volker:
Flame Retardancy Mechanisms and Performance of a Halogen-free Phosphorus Polyester in PBT.
In: 22nd Annual Conference on Recent Advances in Flame Retardancy of Polymeric Materials 2011. - Red Hook, NY : Curran, 2012 . - pp. 325-340

Altstädt, Volker ; Spörrer, Andreas N. J. ; Mühlbacher, Mathias ; Michel, Peter ; Seidel, Sonja:
Großserientauglicher Hochleistungsleichtbau mit UD-Tapes.
In: Lightweight Design. Vol. 5 (2012) Issue 2 . - pp. 18-25.
DOI: https://doi.org/10.1365/s35725-012-0084-5

Konrad, Christian ; Völkl, Rainer ; Glatzel, Uwe:
Herstellung metallbeschichteter Werkstoffe.
DE 10 2012 022 846.5 (2012)

Scheibel, Thomas:
Herstellung und Verarbeitung von Spinnenseidenproteinen.
In: GAK : Gummi, Fasern, Kunststoffe. Vol. 2012 (2012) Issue 1 . - pp. 41-43.

Burk, Steffen ; Gorr, Bronislava ; Christ, Hans-Jürgen ; Schliephake, Daniel ; Heilmaier, Martin ; Hochmuth, Christian ; Glatzel, Uwe:
High-temperature oxidation behaviour of a single-phase (Mo,Ti)5Si3 (Mo--Si--Ti) alloy.
In: Scripta Materialia. Vol. 66 (2012) Issue 5 . - pp. 223-226.
DOI: https://doi.org/10.1016/j.scriptamat.2011.10.042

Krenkel, Walter:
Hochtemperatur-Leichtbau mit keramischen Werkstoffen.
2012
Event: Forschungszentrum Jülich GmbH , 15.05.2012 , Jülich, Deutschland.
(Conference item: Lecture series , Speech )

Fischer, Bianca ; Ziadeh, Mazen ; Pfaff, André ; Breu, Josef ; Altstädt, Volker:
Impact of large aspect ratio, shear-stiff, mica-like clay on mechanical behavior of PMMA/clay nanocomposites.
In: Polymer. Vol. 53 (2012) Issue 15 . - pp. 3230-3237.
DOI: https://doi.org/10.1016/j.polymer.2012.04.055

Pollak, Thilo:
Influence of side walls and undulated topography on viscous gravity-driven film flow.
Bayreuth , 2012
( Doctoral thesis, 2012 , Universität Bayreuth, Fakultät für Ingenieurwissenschaften)

Renz, Ralph ; Seifert, Gerd ; Krenkel, Walter:
Integration of CMC Brake Disks in Automotive Brake Systems.
In: International Journal of Applied Ceramic Technology. Vol. 9 (2012) Issue 4 . - pp. 712-724.
DOI: https://doi.org/10.1111/j.1744-7402.2012.02812.x

Konrad, Christian ; Fuhrmann, Lars ; Völkl, Rainer ; Glatzel, Uwe:
Internal oxidation with significant contribution of oxygen diffusion through the oxide phase.
In: Corrosion Science. Vol. 63 (2012) . - pp. 187-192.
DOI: https://doi.org/10.1016/j.corsci.2012.06.003

Hilbrig, Frank ; Freitag, Ruth:
Isolation and purification of recombinant proteins, antibodies and plasmid DNA with hydroxyapatite chromatography.
In: Biotechnology Journal. Vol. 7 (2012) Issue 1 . - pp. 90-102.
DOI: https://doi.org/10.1002/biot.201100015

Krenkel, Walter:
Keramische Verbundwerkstoffe für den Hochtemperatur-Leichtbau : Stand und Perspektiven.
2012
Event: DKG-Jahrestagung 2012 und DKG/DGM Symposium Hochleistungskeramik , 05.-07.03.2012 , Nürnberg, Deutschland.
(Conference item: Conference , Speech )

Krenkel, Walter:
Konstruieren mit technischer Keramik.
In: Rieg, Frank ; Steinhilper, Rolf (Hrsg.): Handbuch Konstruktion. - München : Hanser-Verlag, 2012 . - pp. 45-63
DOI: https://doi.org/10.3139/9783446434035

Scherm, Florian ; Bezold, Johannes ; Glatzel, Uwe:
Laser welding of Mg alloy MgAl3Zn1 (AZ31) to Al alloy AlMg3 (AA5754) using ZnAl filler material.
In: Science and Technology of Welding and Joining. Vol. 17 (2012) Issue 5 . - pp. 364-367.
DOI: https://doi.org/10.1179/136217112X13333824902080

Drescher, O. ; Njuhovic, E. ; Glöde, Stefan ; Persson, J. ; Altstädt, Volker:
Metallic permeation barrier for cryogenic composite propellant storage and transfer applications.
In: Ouwehand, Leny (ed.): Proceedings of the 12th European Conference on Spacecraft Structures, Materials & Environmental Testing. - Noordwijk : ESA Communications, 2012

Bölitz, Marie-Christin ; Brunner, Martin ; Völkl, Rainer ; Mukherji, Debashis ; Rösler, Joachim ; Glatzel, Uwe:
Microstructural and analytical study of boron-doped Co-Re-Cr alloys using transmission electron microscopy and electron energy loss spectroscopy.
In: International Journal of Materials Research. Vol. 103 (2012) Issue 5 . - pp. 554-558.
DOI: https://doi.org/10.3139/146.110729

Bensch, Matthias ; Sato, Atrushi ; Warnken, Niels ; Affeldt, Ernst ; Reed, Roger C. ; Glatzel, Uwe:
Modelling of High Temperature Oxidation of Alumina-Forming Single-Crystal Nickel-Base Superalloys.
In: Acta Materialia. Vol. 60 (2012) Issue 15 . - pp. 5468-5480.
DOI: https://doi.org/10.1016/j.actamat.2012.06.036

Schallon, Anja ; Synatschke, Christopher V. ; Jérôme, Valérie ; Müller, Axel H. E. ; Freitag, Ruth:
Nanoparticulate Nonviral Agent for the Effective Delivery of pDNA and siRNA to Differentiated Cells and Primary Human T Lymphocytes.
In: Biomacromolecules. Vol. 13 (2012) Issue 11 . - pp. 3463-3474.
DOI: https://doi.org/10.1021/bm3012055

Feist, Eleonora:
Optimierung der Antiangiogenese-Therapie in der Behandlung von Krebserkrankungen mit Methoden der Optimalen Steuerung.
2012
(Diploma, 2012 , Universität Bayreuth, Fakultät für Mathematik, Physik und Informatik, Lehrstuhl für Ingenieurmathematik)

Crone, Joachim ; Rosemann, Bernd ; Mörtl, Markus:
Recyclinggerechtes Konstruieren.
In: Rieg, Frank ; Steinhilper, Rolf (ed.): Handbuch Konstruktion. - München : Hanser, 2012 . - pp. 485-509

Brüning, Ralf ; Rosemann, Bernd ; Enderle, Bettina ; Schmidt, Kerstin ; Spengler, Thomas S.:
ReUse of WEEE.
In: Recovery. Vol. 2012 (2012) Issue 4 . - pp. 26-45.

Rosemann, Bernd ; Freiberger, Stefan:
Reverse Engineering.
In: Rieg, Frank ; Steinhilper, Rolf (ed.): Handbuch Konstruktion. - München : Hanser, 2012 . - pp. 811-822

Degenhardt, Ulrich ; Stegner, Frank ; Liebscher, Christian H. ; Glatzel, Uwe ; Berroth, Karl ; Motz, Günter ; Krenkel, Walter:
Sintered Silicon Nitride/Nano-Silicon Carbide Materials Based on Preceramic Polymers and Ceramic Powder.
In: Journal of the European Ceramic Society. Vol. 32 (2012) Issue 9 . - pp. 1893-1899.
DOI: https://doi.org/10.1016/j.jeurceramsoc.2011.09.007

Rosemann, Bernd:
Spanende Fertigung.
In: Rieg, Frank ; Steinhilper, Rolf (ed.): Handbuch Konstruktion. - München : Hanser, 2012 . - pp. 1001-1047
DOI: https://doi.org/10.3139/9783446434035.039

Langhof, Nico ; Spatz, Carolin ; Günthner, Martin ; Voigt, R. ; Motz, Günter ; Krenkel, Walter:
Steigerung der Effizienz durch neuartige keramische Beschichtungen und keramische faserverstärkte Armierungen für Heißdampfrohre.
In: Maile, Karl (ed.): 2. VDI Fachkonferenz Werkstoffe in der Kraftwerkstechnik. - Düsseldorf : VDI Wissensforum, 2012

Brunner, Martin ; Bensch, Matthias ; Völkl, Rainer ; Affeldt, Ernst ; Glatzel, Uwe:
Thickness influence on creep properties for Ni-based superalloy M247LC SX.
In: Materials Science and Engineering: A. Vol. 550 (2012) . - pp. 254-262.
DOI: https://doi.org/10.1016/j.msea.2012.04.067

Altstädt, Volker ; Spörrer, Andreas N. J. ; Mühlbacher, Mathias ; Michel, Peter ; Seidel, Sonja:
Ultralitec-Verfahren : Großserientauglicher Hochleistungsleichtbau.
In: Kunststoffe. Vol. 102 (2012) Issue 5 . - pp. 53-58.

Brüning, Ralf ; Rosemann, Bernd ; Enderle, Bettina ; Schmidt, K. ; Spengler, Thomas S.:
The VDI 2343 Guideline Gives Recommendations for the Concerned Parties : Part ReUse.
In: Reader ISWA World Solid Waste Congress. - Florence : ISWA, 2012 . - 10 S.

Weiß, Roland ; Krenkel, Walter ; Maile, Karl ; Schmidt, Jens ; Metzger, Klaus ; Scheibel, Thorsten ; Henrich, Martin ; Ebert, Marco ; Lauer, Andreas ; Spatz, Carolin ; Berreth, Karl ; Eckardt, Christian ; Bischoff, Sandro ; Czychon, Karl-Heinz:
Verfahren zur Herstellung eines Verbundkörpers.
DE 10 2012 219 870 A1, US 9,895, 852 (2018), EP 2 914 427 B1 (2012)

Schuldhaus, Dominik ; Leutheuser, Heike ; Eskofier, Björn M.:
Automatic classification of sport exercises for training support.
In: Sportinformatik 2012 : Beiträge. - Konstanz , 2012 . - pp. 214-219

Thomik, Andreas ; Faisal, A. Aldo:
Deriving motion primitives from naturalistic hand movements for neuroprosthetic control.
In: Frontiers in Computational Neuroscience. Vol. 6 (2012) .
DOI: https://doi.org/10.3389/conf.fncom.2012.55.00256

Leutheuser, Heike ; Eskofier, Björn M.:
Heart rate variability during physical exercise.
In: Sportinformatik 2012 : Beiträge. - Konstanz , 2012 . - pp. 14-20

Taylor, Scott V. ; Faisal, A. Aldo:
How internal metabolic state changes motor coordination computations in reaching movements.
In: Frontiers in Computational Neuroscience. Vol. 6 (2012) .
DOI: https://doi.org/10.3389/conf.fncom.2012.55.00115

Behbahani, Feryal M. P. ; Faisal, A. Aldo:
Human category learning is consistent with Bayesian generative but not discriminative classification strategies.
In: Frontiers in Computational Neuroscience. Vol. 6 (2012) .
DOI: https://doi.org/10.3389/conf.fncom.2012.55.00095

Faisal, A. Aldo:
Noise in Neurons and Other Constraints.
In: Le Novère, Nicolas (ed.): Computational Systems Neurobiology. - Dordrecht : Springer, 2012 . - pp. 227-257
DOI: https://doi.org/10.1007/978-94-007-3858-4_8

Schafföner, Stefan ; Aneziris, Christos G.:
Pressure slip casting of coarse grain oxide ceramics.
In: Ceramics International. Vol. 38 (2012) Issue 1 . - pp. 417-422.
DOI: https://doi.org/10.1016/j.ceramint.2011.06.064

Neishabouri, Ali ; Finn, Amber ; Pristera, Alessandro ; Okuse, Kenji ; Faisal, A. Aldo:
Stochastic simulations reveal how clustering sodium ion channels in thin axons more than doubles the metabolic efficiency of action potentials.
In: Frontiers in Computational Neuroscience. Vol. 6 (2012) .
DOI: https://doi.org/10.3389/conf.fncom.2012.55.00133

Abbott, William W. ; Faisal, A. Aldo:
Ultra-low-cost 3D gaze estimation : an intuitive high information throughput compliment to direct brain–machine interfaces.
In: Journal of Neural Engineering. Vol. 9 (2012) Issue 4 . - 046016.
DOI: https://doi.org/10.1088/1741-2560/9/4/046016

Abbott, William W. ; Faisal, A. Aldo:
Using ultra-low cost 3D gaze tracking as an intuitive, non-invasive, high information throughput alternative to BMIs.
In: Frontiers in Computational Neuroscience. Vol. 6 (2012) .
DOI: https://doi.org/10.3389/conf.fncom.2012.55.00131

Behbahani, Feryal M. P. ; Faisal, A. Aldo:
Visual Object Classification is Consistent with Bayesian Generative Representations.
2012
Event: Computational and Systems Neuroscience, Cosyne 2012 , 23.-26.02.2012 , Salt Lake City, USA.
(Conference item: Conference , Paper )

Sylaidi, Anastasia ; Faisal, A. Aldo:
What is the hierarchical representation of tasks involving objects with complex internal dynamics?
In: Frontiers in Computational Neuroscience. Vol. 6 (2012) .
DOI: https://doi.org/10.3389/conf.fncom.2012.55.00129

2011

Assmann, Jens ; Grässel, Georg ; Hahn, Klaus ; Janssens, Geert ; Lambert, Jürgen ; Merkel, Peter ; Ruckdäschel, Holger ; Schips, Carsten ; Zylla, Christof:
Foam Board Based on Styrene Polymer-Polyolefin Mixtures : SCHAUMSTOFFPLATTE AUF BASIS VON STYROLPOLYMER-POLYOLEFIN-MISCHUNGEN.
WO2012089574A1 (2011)

Altstädt, Volker ; Beier, Uwe ; Gröppel, Peter ; Grübel, Andre ; Mühlhaupt, Rolf ; Wissert, Meik:
MichaelVerfahren zur Exfolierung organisch modifizierter Schichtsilikate durch Hochdruckdispergierung : Process for exfoliating organically modified sheet silicates by high-pressure dispersion.
EP2643388A1 (2011)

Ruckdäschel, Holger ; Desbois, Philippe ; Gruber, Freddy ; Hahn, Klaus ; Kriha, Olaf ; Sampath, Bangaru Dharmapuri Sriramulu ; Scherzer, Dietrich:
Composite Component Comprising a Polymer Phase and a Foamed Phase, and Processes for Producing the Same.
US2012119402A1 (2011)

Dahl, Franz ; Hahn, Klaus ; Ruch, Joachim ; Ruckdäschel, Holger ; Schips, Carsten ; Schmied, Bernhard ; Stängle, Michael:
Method for Producing Expandable Thermoplastic Particles by Post-Impregnation : VERFAHREN ZUR HERSTELLUNG VON EXPANDIERBAREN THERMOPLASTISCHEN PARTIKELN DURCH NACHIMPRÄGNIERUNG.
WO2012062773A1 (2011)

Assmann, Jens ; Hahn, Klaus ; Hofmann, Maximilian ; Ruckdäschel, Holger ; Schips, Carsten:
Process for Producing Expandable Thermoplastic Beads with Improved Expandability.
US2012121905A1 (2011)

Desbois, Philippe ; Gruber, Freddy ; Hahn, Klaus ; Kriha, Olaf ; Ruckdäschel, Holger ; Sampath, Bangaru Dharmapuri Sriramulu ; Scherzer, Dietrich:
Composite Component Comprising a Polymer Phase and a Foamed Phase, and Method for Producing Same : VERBUNDBAUTEIL UMFASSEND EINE POLYMER-PHASE UND EINE GESCHÄUMTE PHASE, UND VERFAHREN ZUR HERSTELLUNG DESSELBEN.
WO2012062684A1 (2011)

Krenkel, Walter:
Ceramic and Carbon Fiber Composites for High Performance Applications.
2011
Event: 7th International Conference on High-Performance Ceramics : CICC-7 , 04.-07.11.2011 , Xiamen, China.
(Conference item: Conference , Lecture )

Altstädt, Volker ; Kempf, M. ; Schwägele, S. ; Ferencz, A.:
Compression fatigue after impact testing of thermosetting composites.
2011
Event: International Conference on Chemical Engineering (ICCE'11) / World Congress of Engineering and Computer Science 2011 , 19.-21.10.2011 , San Francisco, USA.
(Conference item: Conference , Speech )

Altstädt, Volker ; Kersch, Michaela ; Schmidt, Hans-Werner:
Verfahren zur Herstellung eines offenzelligen Polymerschaums : Verfahren zur Herstellung eines offenzelligen Polymerschaums sowie offenzelliger Polymerschäume.
DE102011083434A1 (2011)

Aschauer, Stephan Josef ; Schilder, Lisa ; Pöhlmann, Ferdinand ; Moos, Ralf ; Schönauer-Kamin, Daniela ; Jess, Andreas:
Solubility of 1-olefins, 2-olefins, n-paraffins and iso-paraffins in Lewis acidic chloroaluminate ionic liquids (BMIM-AlCl4).
2011
Event: ECCE 2011 : 8th European Congress of Chemical Engineering , 25. - 29.09.2011 , Berlin.
(Conference item: Conference , Poster )

Hahn, Klaus ; Hofmann, Maximilian ; Ruckdäschel, Holger ; Sandler, Jan K. W. ; Scherzer, Dietrich:
Extrusion Foams with Improved Rigidity : Extrusionsschaumstoffe mit verbesserter Steifigkeit.
EP2420531A1 (2011)

Hahn, Klaus ; Hofmann, Maximilian ; Ruckdäschel, Holger ; Sandler, Jan K. W. ; Scherzer, Dietrich:
Particle Foam Based on a Polymer including Polystyrene, Styrene Copolymer, Polysulfone or Polyethersulfone, Comprises Inorganic Filler e.g., Talc Having Specified Particle Size and Wax or Oligomer Based Nucleating Agent e.g., Polyethylene : Partikelschaumstoffe mit verbesserter Steifigkeit.
DE102011110216A1 (2011)

Ruckdäschel, Holger ; Desbois, Philippe ; Gruber, Freddy ; Hahn, Klaus ; Kriha, Olaf ; Sampath, Bangaru Dharmapuri Sriramulu:
Polyester-Based Expandable : EXPANDIERBARE GRANULATE AUF POLYESTERBASIS.
WO2012020112A1 (2011)

Kempf, M. ; Schwägele, S. ; Ferencz, A. ; Altstädt, Volker:
Effect of impact damage on the compression fatigue performance of glass and carbon fibre reinforced composites.
2011
Event: ICCM18: The 18th International Conference on Composite Materials , 21.-26.08.2011 , Jeju Island, Korea.
(Conference item: Conference , Paper )

Kothmann, Martin H. ; Krämer, J. ; Wolff-Fabris, Felipe ; Altstädt, Volker ; Kühner, U. ; von Lossow, C. ; Gröppel, Peter:
Mechanical and thermal properties of nanoparticle modified epoxy resin after thermal ageing.
2011
Event: 9th Eurofillers International Conference , 21.-25.08.2011 , Dresden, Deutschland.
(Conference item: Conference , Speech )

Njuhovic, E. ; Witt, A. ; Kempf, M. ; Glöde, Stefan ; Altstädt, Volker:
Metallization of fiber-reinforced epoxy composites : Effect of surface structure on the peel strength.
2011
Event: ICCM18: The 18th International Conference on Composite Materials , 21.-26.08.2011 , Jeju Island, Korea.
(Conference item: Conference , Speech )

Sandler, Jan K. W. ; Bellin, Ingo ; Djuric, Dejan ; Kolter, Karl ; Ruckdäschel, Holger:
Nanoporous Foamed Active Compound-Containing Preparations based on Pharmaceutically Acceptable Thermoplastically Workable Polymers.
US8636929B2 (2011)

Bellin, Ingo ; Djuric, Dejan ; Kolter, Karl ; Ruckdäschel, Holger ; Sandler, Jan K. W.:
Nanoporous Foamed, Active Ingredient-Containing Preparations on the Basis of Pharmaceutically Acceptable Thermoplastically Processable Polymers : NANOPORÖSE GESCHÄUMTE WIRKSTOFFHALTIGE ZUBEREITUNGEN AUF BASIS VON PHARMAZEUTISCH AKZEPTABLEN THERMOPLASTISCH VERARB.
WO2011144731A1 (2011)

Desbois, Philippe ; Exner, Christian ; Hahn, Klaus ; Hingmann, Roland ; Hofmann, Maximilian ; Kriha, Olaf ; Ruckdäschel, Holger ; Warzelhan, Volker:
Expandable Polyamide Granules.
WO2011134996A1 (2011)

Altstädt, Volker ; Cristadoro, Anna ; Döring, Manfred ; Henningsen, Michael ; Krämer, Johannes ; Schmidt, Alexander ; Stumbe, Jean-Francois ; Zang, Lin:
Hyperverzweigte Polymere zur Modifikation der Zähigkeit von anionisch gehärteten Epoxidharz-Systemen : Hyperbranched polymers for modifying the toughness of anionically cured epoxy resin systems.
WO2012136273A1 (2011)

Altstädt, Volker ; Götz, C. ; Wolff-Fabris, Felipe:
Fatigue behavior of polymer nanocomposites.
2011
Event: ICCM18: The 18th International Conference on Composite Materials , 21.-26.08.2011 , Jeju Island, Korea.
(Conference item: Conference , Paper )

Schmalz, Thomas ; Hausherr, Jan-Marcel ; Müller, Walter ; Kraus, Tobias ; Kempe, Rhett ; Motz, Günter ; Krenkel, Walter:
Analysis of Polethylene-Particle Filled SiCN Precursor and the Resulting Porous Ceramics with Emphasis on Using Micro Computed Tomography.
In: Journal of the Ceramic Society of Japan. Vol. 119 (2011) Issue 1390 . - pp. 477-482.
DOI: https://doi.org/10.2109/jcersj2.119.477

Konrad, Christian ; Völkl, Rainer ; Glatzel, Uwe:
Anodenmaterial für Brennstoffzellen : Herstellung eines funktionalen Verbundwerkstoffs, Cermets, aus einem elektronenleitenden Metall und einer sauerstoffionenleitenden Keramik zur Anwendung bei hohen Temperaturen.
DE 10 2011 107 827.8 (2011)

Arnold, Marc ; Bittermann, Holger ; Kalbfuss-Zimmermann, Bernd ; Neumann, Thomas ; Schmidt, Kristina ; Sekul, Renate ; Hilbrig, Frank ; Ludolph, Heiko ; Freitag, Ruth:
Antibody purification by affinity chromatography based on small molecule affinity ligands identified by SPR-based screening of chemical microarrays.
In: Journal of Chromatography A. Vol. 1218 (2011) Issue 29 . - pp. 4649-4659.
DOI: https://doi.org/10.1016/j.chroma.2011.05.040

Fleck, Michael ; Pilipenko, Denis ; Spatschek, Robert ; Brener, Efim A.:
Brittle fracture in viscoelastic materials as a pattern-formation process.
In: Physical Review E. Vol. 83 (2011) Issue 4 . - 046213.
DOI: https://doi.org/10.1103/PhysRevE.83.046213

Schmalz, Thomas ; Kraus, Tobias ; Günthner, Martin ; Liebscher, Christian H. ; Glatzel, Uwe ; Kempe, Rhett ; Motz, Günter:
Catalytic formation of carbon phases in metal modified, porous polymer derived SiCN ceramics.
In: Carbon. Vol. 49 (2011) Issue 9 . - pp. 3065-3072.
DOI: https://doi.org/10.1016/j.carbon.2011.03.027

Singh, Sheela ; Wanderka, Nelia ; Murty, B. S. ; Glatzel, Uwe ; Banhart, John:
Decomposition in multi-component AlCoCrCuFeNi high-entropy alloy.
In: Acta Materialia. Vol. 59 (2011) Issue 1 . - pp. 182-190.
DOI: https://doi.org/10.1016/j.actamat.2010.09.023

Perret, Birgit ; Schartel, Bernhard ; Stöß, Kai ; Diederichs, Jan ; Ciesielski, Michael ; Döring, Manfred ; Krämer, Johannes ; Altstädt, Volker:
Decomposition Mechanisms and Fire Behavior.
In: 21st Annual Conference on Recent Advances in Flame Retardancy of Polymeric Materials 2010. - Red Hook, NY : Curran, 2011 . - pp. 128-139

Krenkel, Walter:
Design and Manufacture of Ceramic Safety Components.
2011
Event: 4th World Materials Research Institutes Forum (WMRIF-4) , 22.-26. Mai 2011 , Shenyang, China.
(Conference item: Conference , Speech )

Konrad, Christian ; Brunner, Martin ; Kyrgyzbaev, Kanat ; Völkl, Rainer ; Glatzel, Uwe:
Determination of heat transfer coefficient and ceramic mold material parameters for alloy IN738LC investment castings.
In: Journal of Materials Processing Technology. Vol. 211 (2011) Issue 2 . - pp. 181-186.
DOI: https://doi.org/10.1016/j.jmatprotec.2010.08.031

Ruckdäschel, Holger ; Ruch, J. ; Hahn, Klaus:
Development of Innovative and Sustainable Foam Solutions.
In: Blowing agents and foaming processes 2011 : [13th international conference] ; Düsseldorf, Germany, 10 - 11 May 2011. - Shawbury : Smithers RAPRA, 2011 . - Paper 24

Ruckdäschel, Holger ; Hingmann, R. ; Ruch, J. ; Hahn, Klaus:
Development of polymer foams : Trends & sustainability.
In: Society of Plastics Engineers (ed.): 69th annual technical conference of the Society of Plastics Engineers 2011, (ANTEC 2011) : Boston, Massachusetts, USA, 1 - 5 May 2011. - Red Hook, NY : Curran, 2011

Voigt, R. ; Can, A. ; Motz, Günter ; Krenkel, Walter:
Development of Ultra-High Temperature Stable Ceramics by Reactive Infiltration Processes.
In: Bansal, Narottam P. (Hrsg.): Processing and properties of advanced ceramics and composites III. - Hoboken, NJ : Wiley, 2011 . - pp. 123-130 . - (Ceramic Transactions ; 225 )

Schallon, Anja ; Synatschke, Christopher V. ; Pergushov, Dmitry V. ; Jérôme, Valérie ; Müller, Axel H. E. ; Freitag, Ruth:
DNA Melting Temperature Assay for Assessing the Stability of DNA Polyplexes Intended for Nonviral Gene Delivery.
In: Langmuir. Vol. 27 (2011) Issue 19 . - pp. 12042-12051.
DOI: https://doi.org/10.1021/la201803c

Krenkel, Walter:
Einführung in die keramischen Verbundwerkstoffe.
2011
Event: DGM-Fortbildungsseminar Keramische Verbundwerkstoffe , 27.-28. September 2011 , Bayreuth.
(Conference item: Workshop , Speech )

Wolff-Fabris, Felipe ; Altstädt, Volker ; Arnold, Ulrich ; Döring, Manfred:
Electron beam curing of composites.
München : Hanser , 2011 . - VI, 129 p.

DOI: https://doi.org/10.3139/9783446433465

Krenkel, Walter:
Entwicklungstrends bei faserverstärkten Keramiken.
2011
Event: Mitgliederversammlung des Carbon Composites e.V. , 2011 , SGL Group Forum Meitingen, Deutschland.
(Conference item: Other Event type, Speech )

Knauer, Sebastian:
Etablierung von Methoden zur Bioevaluation antitumoraler Naturstoffe, Metabolite und Analoga.
Bayreuth , 2011 . - 258 Seiten p.
( Doctoral thesis, 2012 , Universität Bayreuth, Fakultät für Biologie, Chemie und Geowissenschaften)

Lenz, Franziska ; Krenkel, Walter:
Fabrication of Fiber Composites with a MAX Phase Matrix by Reactive Melt Infiltration.
In: IOP Conference Series: Materials Science and Engineering. Vol. 18 (2011) . - 202030.
DOI: https://doi.org/10.1088/1757-899X/18/20/202030

Günthner, Martin ; Schütz, Adelheid ; Glatzel, Uwe ; Wang, Kaishi ; Bordia, Rajendra K. ; Greißl, Oliver ; Motz, Günter ; Krenkel, Walter:
High Performance Environmental Barrier Coatings, Part I: Passive Filler Loaded SiCN System for Steel.
In: Journal of the European Ceramic Society. Vol. 31 (2011) Issue 15 . - pp. 3003-3010.
DOI: https://doi.org/10.1016/j.jeurceramsoc.2011.05.027

Teichmann, Katharina ; Liebscher, Christian H. ; Völkl, Rainer ; Vorberg, Stefan ; Glatzel, Uwe:
High Temperature Strengthening Mechanisms in the Alloy Platinum-5% Rhodium DPH.
In: Platinum Metals Review. Vol. 55 (2011) Issue 4 . - pp. 217-224.
DOI: https://doi.org/10.1595/147106711X591971

Krenkel, Walter:
Hochtemperatur-Leichtbau mit keramischen Werkstoffen.
2011
Event: Ingenieurkolloquium der Materialprüfungsanstalt MPA , 29. Juni 2011 , Stuttgart.
(Conference item: Conference , Speech )

Krenkel, Walter:
Hybrid Ceramic-Metal Tubes for Steam Power Plants.
2011
Event: International Symposium on Advanced Ceramics and Technology for Sustainable Energy Applications (ACTSEA) , 31.10. - 02.11.2011 , Kenting, Taiwan.
(Conference item: Conference , Speech )

Apeldorn, Thomas ; Keilholz, Clemens ; Altstädt, Volker:
Hybrid Multilayers : Economic Multilayers.
In: Kunststoffe international. Vol. 101 (2011) Issue 6 . - pp. 46-50.

Apeldorn, Thomas ; Keilholz, Clemens ; Altstädt, Volker:
Hybride Multilayer : Wirtschaftlich trotz mehr Lagen.
In: Kunststoffe. Vol. 101 (2011) Issue 6 . - pp. 78-83.

Synatschke, Christopher V. ; Schallon, Anja ; Jérôme, Valérie ; Freitag, Ruth ; Müller, Axel H. E.:
Influence of Polymer Architecture and Molecular Weight of Poly(2-(dimethylamino)ethyl methacrylate) Polycations on Transfection Efficiency and Cell Viability in Gene Delivery.
In: Biomacromolecules. Vol. 12 (2011) Issue 12 . - pp. 4247-4255.
DOI: https://doi.org/10.1021/bm201111d

Müller, Norbert ; Reiß, Sebastian ; Fremerey, Peter ; Jess, Andreas ; Moos, Ralf:
Initial tests to detect quantitatively the coke loading of reforming catalysts by a contactless microwave method.
In: Chemical Engineering and Processing. Vol. 50 (2011) Issue 8 . - pp. 729-731.
DOI: https://doi.org/10.1016/j.cep.2011.07.002

Krenkel, Walter:
Keramische Verbundwerkstoffe : Herstellung, Einsatz und Perspektiven.
2011
Event: ITCF-Kolloquium , 17. Mai 2011 , Denkendorf.
(Conference item: Conference , Speech )

Krenkel, Walter ; Spatz, Carolin ; Schmidt, Jens:
Lasttragende Armierung von innendruckbeaufschlagten Hohlkörpern.
DE 10 2011 056 418.7 (2011)

Pfaff, André ; Schallon, Anja ; Ruhland, Thomas M. ; Majewski, Alexander P. ; Schmalz, Holger ; Freitag, Ruth ; Müller, Axel H. E.:
Magnetic and Fluorescent Glycopolymer Hybrid Nanoparticles for Intranuclear Optical Imaging.
In: Biomacromolecules. Vol. 12 (2011) Issue 10 . - pp. 3805-3811.
DOI: https://doi.org/10.1021/bm201051p

Srivastava, Vijay K. ; D'Szouza, V. J. A. ; Mucha, H. ; Krenkel, Walter:
Manufacturing, Analysis and Modelling of Porous Si-SiC Ceramics Derived by Oxidation form C/C-Si-SiC Composites.
In: Journal of Ceramic Science and Technology. Vol. 2 (2011) Issue 2 . - pp. 111-118.
DOI: https://doi.org/10.4416/JCST2011-00007

Keller, Thomas F. ; Engelhardt, Hannes ; Adam, Peter ; Galetz, Mathias ; Glatzel, Uwe ; Jandt, Klaus D.:
Near-Surface Microstructural Reorganization of UHMWPE under Cyclic Load : A Pilot Study.
In: Advanced Engineering Materials. Vol. 13 (2011) Issue 12 . - B476-B482.
DOI: https://doi.org/10.1002/adem.201180058

Pilipenko, Denis ; Fleck, Michael ; Emmerich, Heike:
On numerical aspects of phase-field fracture modelling.
In: The European Physical Journal Plus. Vol. 126 (2011) . - 100.
DOI: https://doi.org/10.1140/epjp/i2011-11100-3

Altstädt, Volker:
Prüfung von Verbundwerkstoffen.
In: Grellmann, Wolfgang ; Seidler, Sabine (ed.): Kunststoffprüfung. 2. Auflage. - München : Hanser, 2011 . - pp. 537-590

Krenkel, Walter:
Rapid Siliconization of C/C-Preforms.
2011
Event: 35th International Conference on Advanced Ceramics and Composites , 23.-28.01.2011 , Daytona Beach, Florida, USA.
(Conference item: Conference , Speech )

Krenkel, Walter:
Reactive Melt Infiltration of Carbon Fiber Preforms : Processing, Properties and Applications.
2011
Event: PacRim 9 , 10.-14. Juli 2011 , Cairns, Australia.
(Conference item: Conference , Speech )

Kroeker, Lena ; Beckwith, Alyx:
Safe Infant Feeding in Lesotho in the Era of HIV/AIDS.
In: Annals of Anthropological Practice. Vol. 35 (2011) Issue 1 . - pp. 50-66.
DOI: https://doi.org/10.1111/j.2153-9588.2011.01066.x

Konschak, Alexander ; Krenkel, Walter:
Schnellsilicierung von C/C-Preformen via LSI-Verfahren.
In: Tagungsband zum 18. Symposium Verbundwerkstoffe und Werkstoffverbunde. - Chemnitz : Eigenverlag, 2011 . - pp. 172-177 . - (Schriftenreihe Werkstoffe und werkstofftechnische Anwendungen ; 41 )

Humenik, Martin ; Scheibel, Thomas ; Smith, Andrew M.:
Spider silk : understanding the structure-function relationship of a natural fiber.
In: Progress in Molecular Biology and Translational Science. Vol. 103 (2011) . - pp. 131-185.
DOI: https://doi.org/10.1016/B978-0-12-415906-8.00007-8

Langhof, Nico ; Spatz, Carolin ; Günthner, Martin ; Voigt, R. ; Motz, Günter ; Krenkel, Walter:
Steigerung der Effizienz durch hochtemperaturbeständige keramische Beschichtungen und Verbundwerkstoffe.
In: Maile, Karl (Hrsg.): VDI-Fachkonferenz Werkstoffe in der Kraftwerkstechnik. - Düsseldorf : VDI Wissensforum, 2011 . - pp. 121-138

Krenkel, Walter:
Technische Keramik.
In: Henning, Frank (Hrsg.): Handbuch Leichtbau. - München : Hanser, 2011 . - pp. 395-411
DOI: https://doi.org/10.3139/9783446428911

Konrad, Christian ; Völkl, Rainer ; Glatzel, Uwe:
Verfahren zur Herstellung einer porösen Keramik.
DE102011107827A1 (2011)

Konrad, Christian ; Völkl, Rainer ; Glatzel, Uwe:
Verfahren zur Herstellung eines Metallmatrix-Verbundwerkstoffs.
DE102011116604.5 (2011)

Abramova, Ekaterina ; Kuhn, Daniel ; Faisal, A. Aldo:
Combining Markov Decision Processes with Linear Optimal Controllers.
In: Jones, Andrew V. (ed.): Imperial College Computing Student Workshop : Proceedings of ICCSW ‘11. - London , 2011 . - pp. 3-9

Taylor, Scott V. ; Faisal, A. Aldo:
Does the cost function of human motor control depend on the internal metabolic state?
In: BMC Neuroscience. Vol. 12 (2011) Issue S1 . - P99.
DOI: https://doi.org/10.1186/1471-2202-12-S1-P99

Satti, Riham ; Deakin, Gillian ; Tanaka, Reiko J. ; Faisal, A. Aldo:
Genes for adaptation and learning spanning evolution : computational comparison between synaptic transmission and chemo-tactic signaling protein networks.
In: BMC Neuroscience. Vol. 12 (2011) Issue S1 . - P97.
DOI: https://doi.org/10.1186/1471-2202-12-S1-P97

Phillips, Holly N. ; Howai, Nikhil A. ; Stan, Guy-Bart V. ; Faisal, A. Aldo:
The implied exploration-exploitation trade-off in human motor learning.
In: BMC Neuroscience. Vol. 12 (2011) Issue S1 . - P98.
DOI: https://doi.org/10.1186/1471-2202-12-S1-P98

Neishabouri, Ali M. ; Faisal, A. Aldo:
The metabolic efficiency of myelinated vs unmyelinated axons.
In: BMC Neuroscience. Vol. 12 (2011) Issue S1 . - P100.
DOI: https://doi.org/10.1186/1471-2202-12-S1-P100

Fleck, Michael ; Mushongera, Leslie T. ; Pilipenko, Denis ; Kumar, Ankit ; Emmerich, Heike:
On phase-field modeling with a highly anisotropic interfacial energy.
In: The European Physical Journal Plus. Vol. 126 (2011) . - 95.
DOI: https://doi.org/10.1140/epjp/i2011-11095-7

Leutheuser, Heike ; Schaffer, Thorsten ; Hensel, Bernhard ; Weigand, Christian ; Schüttler, Jürgen ; Jeleazcov, Christian:
Quantitative analysis of the cardiorespiratory system during paced respiration.
In: Proceedings of the 7th Russian-Bavarian Conference on Biomedical Engineering (RBC). - Erlangen , 2011 . - pp. 9-10

Gyring, Peter ; Faisal, A. Aldo:
Sensory limits in the rodent whisker system predict an internal forward model for sensorimotor estimation of object touch.
In: BMC Neuroscience. Vol. 12 (2011) Issue S1 . - P101.
DOI: https://doi.org/10.1186/1471-2202-12-S1-P101

Faisal, A. Aldo ; Luria, Victor A.:
Serial decision-making and noise in the assembly of neural circuits.
In: BMC Neuroscience. Vol. 12 (2011) Issue S1 . - O11.
DOI: https://doi.org/10.1186/1471-2202-12-S1-O11

Belić, Jovana J. ; Faisal, A. Aldo:
The structured variability of finger coordination in daily tasks.
In: BMC Neuroscience. Vol. 12 (2011) Issue S1 . - P102.
DOI: https://doi.org/10.1186/1471-2202-12-S1-P102

Abbott, William W. ; Faisal, A. Aldo:
Ultra-low cost eyetracking as an high-information throughput alternative to BMIs.
In: BMC Neuroscience. Vol. 12 (2011) Issue S1 . - P103.
DOI: https://doi.org/10.1186/1471-2202-12-S1-P103

2010

Assmann, Jens ; Grässel, Georg ; Hahn, Klaus ; Hofmann, Maximilian ; Knoll, Konrad ; Ruckdäschel, Holger ; Schips, Carsten:
Elastic Particle Foam Made from Polyolefins/Styrol Polymer Mixtures : ELASTISCHER PARTIKELSCHAUMSTOFF AUF BASIS VON POLYOLEFIN/STYROLPOLYMER-MISCHUNGEN.
WO2010076213A1 (2010)

Fleckenstein, Christoph ; Braun, Frank ; Janssens, Geert ; Denecke, Hartmut ; Ruckdäschel, Holger ; Bellin, Ingo ; Fischer, Jürgen ; Hahn, Klaus ; Massone, Klemens ; Pawlowski, Manfred ; Kriha, Olaf ; Spies, Patrick ; Merkel, Peter ; Fuchs, Sabine ; Sandler, Jan K. W.:
Flame Protected Polymer Foams.
WO2011073141A1 (2010)

Ruckdäschel, Holger ; Schips, Carsten ; Assmann, Jens ; Hahn, Klaus ; Hofmann, Maximilian:
Method for Producing Expandable Thermoplastic Particles with Improved Expandability : Verfahren zur Herstellung von expandierbaren thermoplastischen Partikeln mit Verbesserter Expandierbarkeit.
WO2012062682A1 (2010)

Bellin, Ingo ; Hahn, Klaus ; Hartenstein, Markus ; Merkel, Peter ; Pawlowski, Manfred ; Ruckdäschel, Holger:
Composite Molded Part, in Particular for Furniture Construction : VERBUNDFORMTEIL INSBESONDERE FÜR DEN MÖBELBAU.
WO2011026977A1 (2010)

Bellin, Ingo ; Hahn, Klaus ; Hartenstein, Markus ; Merkel, Peter ; Pawlowski, Manfred ; Ruckdäschel, Holger:
Extruded Foam : EXTRUSIONSSCHAUMSTOFF.
WO2011026978A1 (2010)

Bellin, Ingo ; Hahn, Klaus ; Hartenstein, Markus ; Ruckdäschel, Holger:
SAN Extruded Foams : SAN-EXTRUSIONSSCHAUMSTOFFE.
WO2011026979A1 (2010)

Altstädt, Volker ; Luinge, Hans ; Wolff-Fabris, Felipe:
Treibmittel zum Herstellen von Schäumen unter Mikrowellenbestrahlung : Blowing Agent for Producing Foams under Microwave Irradiation.
WO2011023433A1 (2010)

Altstädt, Volker ; Ferencz, Andreas ; Klophaus, Katja ; Wolff-Fabris, Felipe:
Verfahren zur Herstellung eines faserhaltigen Verbundwerkstoffs : Method for producing a fibrous composite material.
DE102009001855A1 (2010)

Assmann, Jens ; Grässel, Georg ; Hofmann, Maximilian ; Janssens, Geert ; Lambert, Jürgen ; Ruckdäschel, Holger ; Schips, Carsten ; Zylla, Christof:
Elastic Expanded Polymer Foam Based on Polyolefin/Styrene Polymer Mixtures.
US8741973B2 (2010)

Schips, Carsten ; Zylla, Christof ; Janssens, Geert ; Grässel, Georg ; Ruckdäschel, Holger ; Assmann, Jens ; Lambert, Jürgen ; Hofmann, Maximilian:
Elastic Particle Foam Material Based on Polyolefin/Styrene Polymer Mixtures.
WO2010100101A1 (2010)

Rosemann, Bernd:
Bürstspanen steigert Flexibilität der Feinbearbeitung.
In: Innovations Report.
8 January 2010

Krenkel, Walter:
Ceramic Matrix Composites for Lightweight Construction.
2010
Event: 34th International Conference on Advanced Ceramics and Composites (ICACC) , 24.-29.01.2010 , Daytona Beach, FL, USA.
(Conference item: Conference , Speech )

Krenkel, Walter:
Ultra High Temperature Ceramic Carbides by Infiltration Processes.
2010
Event: 34th International Conference on Advanced Ceramics and Composites (ICACC) , 24.-29.01.2010 , Daytona Beach, FL, USA.
(Conference item: Conference , Speech )

Galetz, Mathias ; Fleischmann, Ernst ; Konrad, Christian ; Schütz, Adelheid ; Glatzel, Uwe:
Abrasion resistance of oxidized zirconium in comparison with CoCrMo and titanium nitride coatings for artificial knee joints.
In: Journal of Biomedical Materials Research Part B: Applied biomaterials. Vol. 93 (2010) Issue 1 . - pp. 244-251.
DOI: https://doi.org/10.1002/jbm.b.31581

Galetz, Mathias ; Glatzel, Uwe:
An activated energy approach for accelerated testing of the deformation of UHMWPE in artificial joints.
In: Journal of the Mechanical Behavior of Biomedical Materials. Vol. 3 (2010) Issue 4 . - pp. 331-338.
DOI: https://doi.org/10.1016/j.jmbbm.2010.01.004

Scheibel, Thomas:
Review of: Basu, B. ; Katti, D. S. ; Kumar , A. (Hrsg.): Advanced Biomaterials, Weinheim, 2010.
In: Macromolecular Bioscience. Vol. 10 (2010) Issue 6 . - p. 674.
DOI: https://doi.org/10.1002/mabi.201000195

Keerl, David ; Hardy, John G. ; Scheibel, Thomas:
Biomimetic spinning of recombinant silk proteins.
In: Narayan, Roger (ed.): Micro- and nanoscale processing of biomaterials : proceedings of Symposium VV. - Warrendale : MRS, 2010 . - (Materials Research Society Symposium Proceedings ; 1239 )
DOI: https://doi.org/10.1557/PROC-1239-VV07-20

Rosemann, Bernd:
Bürstspanen steigert Flexibilität der Feinbearbeitung.
In: Maschinenmarkt. (2010) Issue 1-2 . - pp. 94-95.

Krenkel, Walter:
Ceramic Materials for High Temperature Applications based on Liquid-Phase Routes.
2010
Event: International Workshop on Advanced Materials and Technologies for Global Energy and Environmental Challenges , 06.-08.12.2010 , Pretoria, South Africa.
(Conference item: Workshop , Speech )

Krenkel, Walter ; Mucha, H. ; Langhof, Nico:
Ceramic Matrix Composites for Friction Applications.
2010
Event: 12th International Ceramics Congress (CIMTEC 2010) , 06.-11.06.2010 , Montecatini Terme, Italy.
(Conference item: Conference , Speech )

Heim, Markus ; Ackerschott, Christian B. ; Scheibel, Thomas:
Characterization of recombinantly produced spider flagelliform silk domains.
In: Journal of Structural Biology. Vol. 170 (2010) Issue 2 . - pp. 420-425.
DOI: https://doi.org/10.1016/j.jsb.2009.12.025

Müllner, Markus ; Schallon, Anja ; Walther, Andreas ; Freitag, Ruth ; Müller, Axel H. E.:
Clickable, Biocompatible, and Fluorescent Hybrid Nanoparticles for Intracellular Delivery and Optical Imaging.
In: Biomacromolecules. Vol. 11 (2010) Issue 2 . - pp. 390-396.
DOI: https://doi.org/10.1021/bm901099p

Krenkel, Walter:
CMC Materials for High Temperature Hybrid Construction.
2010
Event: Shanghai Workshop on Ceramic Materials for Energy and Environmental Technologies (CMEET-Shanghai 2010) , 2010 , Shanghai, China.
(Conference item: Workshop , Speech )

Lammel, Andreas ; Hu, Xioa ; Park, Sang-Hyug ; Kaplan, David L. ; Scheibel, Thomas:
Controlling silk fibroin particle features for drug delivery.
In: Biomaterials. Vol. 31 (2010) Issue 16 . - pp. 4583-4591.
DOI: https://doi.org/10.1016/j.biomaterials.2010.02.024

Negahdari, Zahra ; Willert-Porada, Monika ; Scherm, Florian:
Development of Novel Functionally Graded Al₂O₃-Lanthanum Hexaaluminate Ceramics for Thermal Barrier Coatings.
In: Materials Science Forum. Vol. 631-632 (2010) . - pp. 97-102.
DOI: https://doi.org/10.4028/www.scientific.net/MSF.631-632.97

Fleck, Michael ; Brener, Efim A. ; Spatschek, Robert ; Eidel, Bernhard:
Elastic and plastic effects on solid-state transformations : a phase field study.
In: International Journal of Materials Research. Vol. 101 (2010) Issue 4 . - pp. 462-466.
DOI: https://doi.org/10.3139/146.110295

Wolff-Fabris, Felipe ; Altstädt, Volker:
Electron beam curing of epoxy composites.
In: Pascault, Jean-Pierre ; Williams, Roberto J. J. (ed.): Epoxy polymers : new materials and innovations. - Weinheim : Wiley-VCH, 2010 . - pp. 253-269
DOI: https://doi.org/10.1002/9783527628704.ch13

Preußner, Johannes ; Fleischmann, Ernst ; Völkl, Rainer ; Glatzel, Uwe:
Enrichment of Boron at Grain Boundaries of Platinum-Based Alloys Determined by Electron Energy Loss Spectroscopy in a Transmission Electron Microscope.
In: International Journal of Materials Research. Vol. 101 (2010) Issue 5 . - pp. 577-579.
DOI: https://doi.org/10.3139/146.110320

Krenkel, Walter:
Experimental Investigations of Frictional Effects in C/SiC Based Ceramic Matrix Systems.
2010
Event: 3rd International Congress on Ceramics (ICC3) , 14.-18.11.2010 , Osaka, Japan.
(Conference item: Conference , Speech )

Konschak, Alexander ; Schulte, R. ; Hennicke, J. ; Kessel, H. U. ; Krenkel, Walter:
Fast Siliconization of C/C-Preforms via LSI.
In: Krenkel, Walter ; Lamon, J. (Hrsg.): High Temperature Ceramic Materials and Composites. - Berlin : AVISO Verl.-Ges., 2010 . - pp. 113-118

Krenkel, Walter:
Fiber Reinforced Ceramic Matrix Composites for Lightweight Construction.
2010
Event: Japan Aerospace Exploration Agency JAXA , 2010 , Tokyo, Japan.
(Conference item: Conference , Speech )

Krenkel, Walter:
Fiber Reinforced Ceramic Matrix Composites for Lightweight Construction.
2010
Event: Nippon Steel Corporation , 2010 , Futtsu, Japan.
(Conference item: Other Event type, Speech )

Ruckdäschel, Holger ; Gutmann, Peter ; Altstädt, Volker ; Schmalz, Holger ; Müller, Axel H. E.:
Foaming of Microstructured and Nanostructured Polymer Blends.
In: Müller, Axel H. E. ; Schmidt, Hans-Werner (Hrsg.): Complex Macromolecular Systems I. - Berlin : Springer, 2010 . - pp. 199-252 . - (Advances in Polymer Science ; 227 )
DOI: https://doi.org/10.1007/12_2009_32

Smith, Andrew M. ; Scheibel, Thomas:
Functional Amyloids Used by Organisms : a Lesson in Controlling Assembly.
In: Macromolecular Chemistry and Physics. Vol. 211 (2010) Issue 2 . - pp. 127-135.
DOI: https://doi.org/10.1002/macp.200900420

Freimark, Denise ; Jérôme, Valérie ; Freitag, Ruth:
A GFP-based method facilitates clonal selection of transfected CHO cells.
In: Biotechnology Journal. Vol. 5 (2010) Issue 1 . - pp. 24-31.
DOI: https://doi.org/10.1002/biot.200800264

Krenkel, Walter ; Lamon, J.:
High Temperature Ceramic Materials and Composites.
Berlin : AVISO Verlagsgesellschaft mbH , 2010 . - 911 p.

Krenkel, Walter:
High Temperature Fiber Composites by Reactive Melt Infiltration.
2010
Event: 3rd International Congress on Ceramics (ICC3) , 14.-18.11.2010 , Osaka, Japan.
(Conference item: Conference , Speech )

Krenkel, Walter:
Hochleistungswerkstoffe durch Silicierung von Kohlenstoff.
2010
Event: Holzforschung München , München, Deutschland.
(Conference item: Other Event type, Speech )

Hagelauer, Amelie ; Weigel, Robert ; Link, A. ; Bader, Bernhard ; Marksteiner, S. ; Wagner, Karl C.:
Improved Modeling of Bulk Acoustic Wave Resonators and Filters.
In: 2010 IEEE International Ultrasonics Symposium. - Piscataway, NJ : IEEE, 2010 . - pp. 857-860
DOI: https://doi.org/10.1109/ULTSYM.2010.5935472

Schütz, Michael R. ; Deeken, Stefan ; Adasch, Volker ; Liebscher, Christian H. ; Glatzel, Uwe ; Senker, Jürgen ; Breu, Josef ; Sattler, Katrin ; Klein, Otto:
Improvement of thermal and mechanical properties of a phenolic resin nanocomposite by in situ formation of silsesquioxanes from a molecular precursor.
In: Journal of Applied Polymer Science. Vol. 117 (2010) Issue 4 . - pp. 2272-2277.
DOI: https://doi.org/10.1002/app.32004

Ruckdäschel, Holger ; Sandler, Jan K. W. ; Wassner, Erik ; Hahn, Klaus:
The Innovation Potential of Polymer Foams.
In: Blowing agents and foaming processes : [12th international conference] ; Cologne, Germany, 19 - 20 May 2010. - Shawbury : Smithers RAPRA, 2010

Rosemann, Bernd:
Life-Cycle-Engineering.
4th PCF World Forum
Berlin : PCF World Forum, 2010 . - 1 p.

Nikulina, Elizaveta ; Völkl, Rainer ; Glatzel, Uwe:
Measurement of the Lattice Misfit of Pt-Al-Cr Superalloy by Convergent Beam Electron Diffraction (CBED).
In: International Journal of Materials Research. Vol. 101 (2010) Issue 5 . - pp. 580-584.
DOI: https://doi.org/10.3139/146.110311

Scherm, Florian ; Völkl, Rainer ; Neubrand, A. ; Bosbach, Franz ; Glatzel, Uwe:
Mechanical characterisation of interpenetrating network metal–ceramic composites.
In: Materials Science and Engineering: A. Vol. 527 (2010) Issue 4-5 . - pp. 1260-1265.
DOI: https://doi.org/10.1016/j.msea.2009.09.063

Krenkel, Walter:
Melt-Infiltrated CMCs - Processing, Properties and Applications.
2010
Event: International Workshop on High Temperature Ceramics and Ceramic Matrix Composites , 2010 , Xi’an, China.
(Conference item: Workshop , Speech )

Nikulina, Elizaveta ; Durst, Karsten ; Göken, Mathias ; Völkl, Rainer ; Glatzel, Uwe:
Microstructural and Micromechanical Characterisation of a Pt-Al-Cr-Ni-Re Alloy by means of Transmission Electron Microscopy and Nanoindentation.
In: International Journal of Materials Research. Vol. 101 (2010) Issue 5 . - pp. 585-588.
DOI: https://doi.org/10.3139/146.110316

Marksteiner, S. ; Link, Andreas ; Hagelauer, Amelie ; Selimovic, Nermin ; Bader, Bernhard:
Modeling of BAW Filters and Duplexers.
In: Fourth International Symposium on Acoustic Wave Devices for Future Mobile Communication Systems. - Chiba , 2010 . - pp. 115-118

Bensch, Matthias ; Preußner, Johannes ; Hüttner, Rainer ; Obigodi, Georgia ; Sannakaisa, Virtanen ; Glatzel, Uwe ; Gabel, Johannes:
Modelling and analysis of the oxidation influence on creep behaviour of thin-walled structures of the single-crystal nickel-base superalloy René N5 at 980 °C.
In: Acta Materialia. Vol. 58 (2010) Issue 5 . - pp. 1607-1617.
DOI: https://doi.org/10.1016/j.actamat.2009.11.004

Akthar, Naveed ; Rosin, Andreas ; Gerdes, Thorsten ; Willert-Porada, Monika:
Modelling of the coupled thermo-electric fluid flow effects in a compact glass melting tank.
In: European Journal of Glass Science and Technology Part A : Glass Technology. Vol. 51 (2010) Issue 1 . - pp. 31-34.

Wamser, Thomas ; Scheler, Sven ; Lehmann, Jürgen ; Krenkel, Walter:
Novel Processing of Porous Oxide Ceramic Matrix Composites.
In: Krenkel, Walter ; Lamon, J. (Hrsg.): High Temperature Ceramic Materials and Composites. - Berlin : AVISO Verl.-Ges., 2010 . - pp. 479-484

Fleck, Michael ; Hüter, Claas ; Pilipenko, Denis ; Spatschek, Robert ; Brener, Efim A.:
Pattern formation during diffusion limited transformations in solids.
In: Philosophical Magazine. Vol. 90 (2010) Issue 1-4 . - pp. 265-286.
DOI: https://doi.org/10.1080/14786430903193241

Flores, Octavio ; Koch, D. ; Motz, Günter ; Krenkel, Walter:
Physicochemical Interactions between MWCNTs and the Ceramic Matrix in SiCN Fibers.
In: Krenkel, Walter ; Lamon, J. (Hrsg.): High Temperature Ceramic Materials and Composites. - Berlin : AVISO Verl.-Ges., 2010 . - pp. 35-40

Galetz, Mathias ; Seiferth, Sabine H. ; Theile, Benjamin ; Glatzel, Uwe:
Potential for adhesive wear in friction couples of UHMWPE running against oxidized zirconium, titanium nitride coatings, and cobalt-chromium alloys.
In: Journal of Biomedical Materials Research Part B: Applied biomaterials. Vol. 93 (2010) Issue 2 . - pp. 468-475.
DOI: https://doi.org/10.1002/jbm.b.31604

Park, Ho-Seon ; Willert-Porada, Monika ; Krenkel, Walter:
Rapid Pyrolysis of CFRP using Microwaves for the Production of C/SiC Composite.
In: Krenkel Walter ; Lamon, J. (Hrsg.): High Temperature Ceramic Materials and Composites. - Berlin : AVISO Verl.-Ges., 2010 . - pp. 132-137

Eisoldt, Lukas ; Hardy, John G. ; Heim, Markus ; Scheibel, Thomas:
The role of salt and shear on the storage and assembly of spider silk proteins.
In: Journal of Structural Biology. Vol. 170 (2010) Issue 2 . - pp. 413-419.
DOI: https://doi.org/10.1016/j.jsb.2009.12.027

Krenkel, Walter:
Short and Long Fiber Reinforced CMCs for High Performance Brakes.
2010
Event: International Symposium on Hybrid Nano Materials Toward Future Industries (HNM 2010) , 19.-20.11.2010 , Nagaoka, Japan.
(Conference item: Conference , Speech )

Scheibel, Thomas:
Spider silk : from nature to bio-inspired materials.
In: Chemical Fibers International. Vol. 60 (2010) Issue 3 . - pp. 160-161.

Negahdari, Zahra ; Willert-Porada, Monika ; Scherm, Florian:
Thermal properties of homogenous lanthanum hexaaluminate/alumina composite ceramics.
In: Journal of the European Ceramic Society. Vol. 30 (2010) Issue 15 . - pp. 3103-3109.
DOI: https://doi.org/10.1016/j.jeurceramsoc.2010.07.026

Hagenau, Anja ; Scheibel, Thomas:
Towards the Recombinant Production of Mussel Byssal Collagens.
In: The Journal of Adhesion. Vol. 86 (2010) Issue 1 . - pp. 10-24.
DOI: https://doi.org/10.1080/00218460903417701

Willert-Porada, Monika ; Krenkel, Walter ; Park, Ho-Seon:
Verfahren zur Herstellung eines Bauteils aus einem Faserverbundwerkstoff.
DE 10 2010 003 212.3 (2010)

Krenkel, Walter:
Werkstoffe und Bauweisen für den Hochtemperatur-Leichtbau.
2010
Event: Internationales Kolloquium "Energieeffiziente Produkt- und Prozessinnovationen in der Produktionstechnik" (eniPROD) , 24.-25.06.2010 , Chemnitz, Deutschland.
(Conference item: Conference , Speech )

Brunner, Martin ; Hüttner, Rainer ; Bölitz, Marie-Christin ; Völkl, Rainer ; Mukherji, Debashis ; Rösler, Joachim ; Depka, Timo ; Somsen, Christoph ; Eggeler, Gunther ; Glatzel, Uwe:
Creep properties beyond 1100°C and microstructure of Co-Re-Cr alloys.
In: Materials Science and Engineering: A. Vol. 528 (2010) Issue 2 . - pp. 650-656.
DOI: https://doi.org/10.1016/j.msea.2010.09.035

Heim, Markus ; Römer, Lin ; Scheibel, Thomas:
Hierarchical structures made of proteins : The complex architecture of spider webs and their constituent silk proteins.
In: Chemical Society Reviews. Vol. 39 (2010) Issue 1 . - pp. 156-164.
DOI: https://doi.org/10.1039/B813273A

Faisal, A. Aldo ; Stout, Dietrich ; Apel, Jan ; Bradley, Bruce:
The manipulative complexity of Lower Paleolithic stone toolmaking.
In: PLoS One. Vol. 5 (2010) Issue 11 . - e13718.
DOI: https://doi.org/10.1371/journal.pone.0013718

Faisal, A. Aldo:
Stochastic Simulation of Neurons, Axons, and Action Potentials.
In: Laing, Carlo ; Lord, Gabriel J. (ed.): Stochastic Methods in Neuroscience. - Oxford : Oxford University Press, 2010 . - pp. 297-343
DOI: https://doi.org/10.1093/acprof:oso/9780199235070.003.0011

2009

Assmann, Jens ; Grässel, Georg ; Hahn, Klaus ; Hofmann, Maximilian ; Knoll, Konrad ; Ruckdäschel, Holger ; Schips, Carsten:
Elastic Particle Foam Based on Polyolefin/Styrene Polymer Mixtures.
WO2010076213A1 (2009)

Assmann, Jens ; Grässel, Georg ; Hahn, Klaus ; Hofmann, Maximilian ; Lambert, Jürgen ; Ruckdäschel, Holger ; Schips, Carsten ; Zylla, Christof:
Expandable Thermoplastic Polymer Particles Based on Polyolefin/Styrene Polymer Mixtures Using Isopentane or Cylopentane as a Blowing Agent : EXPANDIERBARE, THERMOPLASTISCHE POLYMERPARTIKEL AUF BASIS VON POLYOLEFIN/STYROLPOLYMER-MISCHUNGEN MIT ISO-PENTAN ODER CYCLOPENTAN ALS TREIBMITTEL.
WO2010076185A1 (2009)

Grässel, Georg ; Ruckdäschel, Holger ; Assmann, Jens ; Hahn, Klaus ; Hofmann, Maximilian ; Janssens, Geert ; Lambert, Jürgen ; Schips, Carsten ; Zylla, Christof:
Elastic Particle Foam Based on Polyolefin/Styrene Polymer Mixtures.
WO2010076184A1 (2009)

Wölling, Jakob ; Krenkel, Walter:
Aktuelle Entwicklungen bei der Herstellung keramischer Faserverbundwerkstoffe.
2009
Event: Clustertreff „Industrialisierung und Anwendung von keramischen Verbundwerkstoffen“ Bayreuth , 19.11.2009 , Bayreuth, Deutschland.
(Conference item: Conference , Speech )

Krenkel, Walter:
Hybrid Ceramic-Metal Constructions for High Temperature Application.
2009
Event: International Symposium on Advanced Ceramics and Technology for Sustainable Energy Applications (ACTSEA) , 01.-04.11.2009 , Taipei, Taiwan.
(Conference item: Conference , Speech )

Krenkel, Walter:
Einführung in die keramischen Verbundwerkstoffe.
2009
Event: DGM-Fortbildungsseminar Keramische Verbundwerkstoffe, Bayreuth , 06.-07.10.2009 , Bayreuth, Deutschland.
(Conference item: Workshop , Speech )

Altstädt, Volker ; Dörr, Sebastian ; Jenninger, Werner ; Lovera, Deliani ; Wagner, Joachim:
Elektromechanischer Wandler : Electromechanical Converter.
EP2159857A1 (2009)

Assmann, Jens ; Hahn, Klaus ; Knoll, Konrad ; Ruckdäschel, Holger ; Schips, Carsten ; Winterlng, Helmut:
Expandable Thermoplastic Polymer Blend : EXPANDIERBARES THERMOPLASTISCHES POLYMERBLEND.
WO2010012702A1 (2009)

Krenkel, Walter:
CMCs for High Temperature Applications.
2009
Event: Air Force Research Laboratory (AFRL) , 05.06.2009 , Daytona Beach, FL, USA.
(Conference item: Other Event type, Speech )

Krenkel, Walter:
Ceramic Matrix Composites for Advanced Friction Applications.
2009
Event: 8th Pacific RIM Conference on Ceramic and Glass Technology , 31.05.-05.06.2009 , Vancouver, Canada.
(Conference item: Conference , Speech )

Spörrer, Andreas N. J. ; Bangarusampath, D. S. ; Richter, F. ; Ruckdäschel, Holger ; Altstädt, Volker:
Structural foam moulding of styrene-acrylonitrile/polycarbonate blends : Morphological aspects and their correlation to rheological and mechanical properties.
2009
Event: PPS-25 : 25th annual meeting of the Polymer Processing Society , 01.-05.03.2009 , Goa, Indien.
(Conference item: Conference , Speech )

Krenkel, Walter:
Advanced Processing and Manufacturing Technologies for Carbon Fiber Reinforced CMCs.
2009
Event: 33rd International Conference and Exhibition on Advanced Ceramics and Composites (ICACC) , 18.-23.01.2009 , Daytona Beach, FL, USA.
(Conference item: Conference , Speech )

11th International Conference of Creep and Fracture of Engineering Materials and Structures, CREEP 2008.
ed.: Glatzel, Uwe ; Eggeler, G. ; Kostorz, G.
Materials Science and Engineering: A. Vol. 510-511 (2009) .

Günthner, Martin ; Kraus, Tobias ; Dierdorf, Andreas ; Decker, Daniel ; Motz, Günter ; Krenkel, Walter:
Advanced Coatings on the Basis of Si(C)N Precursors for Protection of Steel against Oxidation.
In: Journal of the European Ceramic Society. Vol. 29 (2009) Issue 10 . - pp. 2061-2068.
DOI: https://doi.org/10.1016/j.jeurceramsoc.2008.11.013

Rosemann, Bernd:
Bayerisches Eingemachtes nach einer fränkisch inspirierten Tradition : „BEnefiT“.
In: Lehrstuhl für Konstruktionstechnik KTmfk, Universität Erlangen-Nürnberg (ed.): Designed for Meerkamm. - Erlangen , 2009 . - pp. 164-167

Krenkel, Walter:
Cost Effective Processing of CMC Composites by Melt Infiltration (LSI-Process).
In: 25th Annual Conference on Composites, Advanced Ceramics, Materials, and Structures - A. - Westerville : Wiley, 2009 . - pp. 443-454 . - (Ceramic Engineering and Science Proceedings ; 22,3 )

Krenkel, Walter:
Design of Ceramic Brake Pads and Disks.
In: 26th Annual Conference on Composites, Advanced Ceramics, Materials, and Structures - A. - Hoboken : Wiley, 2009 . - pp. 319-330 . - (Ceramic Engineering and Science Proceedings ; 23,3 )
DOI: https://doi.org/10.1002/9780470294741.ch37

Preußner, Johannes ; Prins, Sara ; Völkl, Rainer ; Liu, Zi-Kui ; Glatzel, Uwe:
Determination of phases in the system chromium-platinum (Cr-Pt) and thermodynamic calculations.
In: Materials Science and Engineering: A. Vol. 510-511 (2009) . - pp. 322-327.
DOI: https://doi.org/10.1016/j.msea.2008.10.059

Völkl, Rainer ; Wenderoth, Markus ; Preußner, Johannes ; Vorberg, Stefan ; Fischer, Bernd ; Yamabe-Mitarai, Y. ; Harada, H. ; Glatzel, Uwe:
Development of a precipitation-strengthened Pt-base superalloy.
In: Materials Science and Engineering: A. Vol. 510-511 (2009) . - pp. 328-331.
DOI: https://doi.org/10.1016/j.msea.2008.12.034

Liebscher, Christian H. ; Völkl, Rainer ; Glatzel, Uwe:
Electron energy losses by channelling-enhanced microanalysis in a ɣ'-strengthened Ni-base alloy with Ti additions.
In: Acta Materialia. Vol. 57 (2009) Issue 14 . - pp. 4217-4223.
DOI: https://doi.org/10.1016/j.actamat.2009.05.019

Galetz, Mathias ; Fleischmann, Ernst ; Glatzel, Uwe:
Femur materials for artificial knee joints : adhesive wear and potential for future developments.
In: Biomaterialien. Vol. 10 (2009) Issue 1-2 . - p. 45.

Hüttner, Rainer ; Gabel, Johannes ; Glatzel, Uwe ; Völkl, Rainer:
First creep results on thin-walled single-crystal superalloys.
In: Materials Science and Engineering: A. Vol. 510-511 (2009) . - pp. 307-311.
DOI: https://doi.org/10.1016/j.msea.2008.10.057

Kurz, H. ; Täger, O. ; Ferkel, H. ; Altstädt, Volker ; Apeldorn, Thomas:
Herstellung von nanomodifizierten Thermoplastfolien.

2009

Suhre, Michael H. ; Hess, Simone ; Golser, Adrian V. ; Scheibel, Thomas:
Influence of divalent copper, manganese and zinc ions on fibril nucleation and elongation of the amyloid-like yeast prion determinant Sup35p-NM.
In: Journal of Inorganic Biochemistry. Vol. 103 (2009) Issue 12 . - pp. 1711-1720.
DOI: https://doi.org/10.1016/j.jinorgbio.2009.09.021

Hagelauer, Amelie ; Weigel, Robert ; Bader, Bernhard ; Henn, G. ; Schäufele, A. ; Marksteiner, S. ; Wagner, Karl C.:
Influence of Mobile Charges in the Substrate of BAW Filters on High Resistivity Silicon.
In: 2009 IEEE International Ultrasonics Symposium and Short Courses. - Piscataway, NJ : IEEE, 2009 . - pp. 2115-2118
DOI: https://doi.org/10.1109/ULTSYM.2009.5441993

Vézy, Cyrille ; Hermanson, Kevin D. ; Scheibel, Thomas ; Bausch, Andreas R.:
Interfacial rheological properties of recombinant spider-silk proteins.
In: Biointerphases. Vol. 4 (2009) Issue 3 . - pp. 43-46.
DOI: https://doi.org/10.1116/1.3174930

Weiss, Agnes ; Jérôme, Valérie ; Burghardt, Diana ; Likke, Likke ; Peiffer, Stefan ; Hofstetter, Eugen-Maria ; Gabler, Ralf ; Freitag, Ruth:
Investigation of factors influencing biogas production in a large-scale thermophilic municipal biogas plant.
In: Applied Microbiology and Biotechnology. Vol. 84 (2009) Issue 5 . - pp. 987-1001.
DOI: https://doi.org/10.1007/s00253-009-2093-6

Schubert, Sven ; Freitag, Ruth:
Investigation of the interaction mechanism of the recombinant human antibody MDJ8 and its fragments with chromatographic apatite phases.
In: Journal of Chromatography A. Vol. 1216 (2009) Issue 18 . - pp. 3831-3840.
DOI: https://doi.org/10.1016/j.chroma.2009.02.074

Hagelauer, Amelie ; Bader, Bernhard ; Henn, G. ; Schäufele, A. ; Marksteiner, S. ; Wagner, Karl C. ; Weigel, Robert:
Low-Loss BAW Filters on High Resistivity Silicon for Mobile Radio.
In: 2009 IEEE MTT-S International Microwave Symposium Digest. - Piscataway, NJ : IEEE, 2009 . - pp. 337-340
DOI: https://doi.org/10.1109/MWSYM.2009.5165702

Glatzel, Uwe ; Völkl, Rainer:
Metalle.
In: Jahresmagazin Ingenieurwissenschaften. (2009) .

Heilmaier, Martin ; Krüger, Manja ; Saage, H. ; Rösler, Joachim ; Mukherji, Debashis ; Glatzel, Uwe ; Völkl, Rainer ; Hüttner, Rainer ; Eggeler, Gunther ; Somsen, Christoph ; Depka, Timo ; Christ, Hans-Jürgen ; Gorr, Bronislava ; Burk, Steffen:
Metallic Materials for Structural Applications Beyond Nickel-Based Superalloys.
In: JOM : the Journal of the Minerals, Metals & Materials Society. Vol. 61 (2009) Issue 7 . - pp. 61-67.
DOI: https://doi.org/10.1007/s11837-009-0106-7

Glatzel, Uwe ; Völkl, Rainer:
Metals.
In: Bullinger, Hans-Jörg (ed.): Technology Guide : Principles – Applications – Trends. - Berlin : Springer, 2009 . - pp. 8-13
DOI: https://doi.org/10.1007/978-3-540-88546-7_2

Scherm, Florian ; Völkl, Rainer ; van Smaalen, Sander ; Mondal, Swastik ; Plamondon, Philippe ; L'Esperance, Gilles ; Bechmann, Florian ; Glatzel, Uwe:
Microstructural characterization of interpenetrating light weight metal matrix composites.
In: Materials Science and Engineering: A. Vol. 518 (2009) Issue 1-2 . - pp. 118-123.
DOI: https://doi.org/10.1016/j.msea.2009.04.010

Kunst, Martin ; Fischersworring-Bunk, Andreas ; L'Esperance, Gilles ; Plamondon, Philippe ; Glatzel, Uwe:
Microstructure and dislocation analysis after creep deformation of die-cast Mg-Al-Sr (AJ) alloy.
In: Materials Science and Engineering: A. Vol. 510-511 (2009) . - pp. 387-392.
DOI: https://doi.org/10.1016/j.msea.2008.07.078

Grunwald, Ingo ; Rischka, Klaus ; Kast, Stefan M. ; Scheibel, Thomas ; Bargel, Hendrik:
Mimicking biopolymers on a molecular scale: nano(bio)technology based on engineered proteins.
In: Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences. Vol. 367 (2009) Issue 1894 . - pp. 1727-1747.
DOI: https://doi.org/10.1098/rsta.2009.0012

Schütz, Adelheid ; Müller, Dieter ; Reichert, P. ; Glatzel, Uwe:
Partial Laser and Gas Nitriding of Titanium Components.
In: HTM Journal of Heat Treatment and Materials. Vol. 64 (2009) Issue 5 . - pp. 270-277.
DOI: https://doi.org/10.3139/105.110034

Brener, Efim A. ; Boussinot, Guillaume ; Hüter, Claas ; Fleck, Michael ; Pilipenko, Denis ; Spatschek, Robert ; Temkin, D. E.:
Pattern formation during diffusional transformations in the presence of triple junctions and elastic effects.
In: Journal of Physics: Condensed Matter. Vol. 21 (2009) Issue 46 . - 464106.
DOI: https://doi.org/10.1088/0953-8984/21/46/464106

Gutmann, Peter ; Greiner, C. ; Ruckdäschel, Holger ; Bangarusampath, D. S. ; Altstädt, Volker:
Polystyrol-Acrylnitril Nanokomposite Schäume.
In: Krenkel, Walter (ed.): Verbundwerkstoffe : 17. Symposium Verbundwerkstoffe und Werkstoffverbunde. - Weinheim : Wily-VCH, 2009 . - pp. 174-180
DOI: https://doi.org/10.1002/9783527627110.ch24

Hardy, John G. ; Scheibel, Thomas:
Production and processing of spider silk proteins.
In: Journal of Polymer Science Part A: Polymer Chemistry. Vol. 47 (2009) Issue 16 . - pp. 3957-3963.
DOI: https://doi.org/10.1002/pola.23484

Hardy, John G. ; Scheibel, Thomas:
Silk-inspired polymers and proteins.
In: Biochemical Society Transactions. Vol. 37 (2009) Issue 4 . - pp. 677-681.
DOI: https://doi.org/10.1042/BST0370677

Pirzer, Tobias ; Geisler, Michael ; Scheibel, Thomas ; Hugel, Thorsten:
Single molecule force measurements delineate salt, pH and surface effects on biopolymer adhesion.
In: Physical Biology. Vol. 6 (2009) Issue 2 . - 025004.
DOI: https://doi.org/10.1088/1478-3975/6/2/025004

Heim, Markus ; Keerl, David ; Scheibel, Thomas:
Spider Silk: From Soluble Protein to Extraordinary Fiber.
In: Angewandte Chemie International Edition. Vol. 48 (2009) Issue 20 . - pp. 3584-3596.
DOI: https://doi.org/10.1002/anie.200803341

Scheibel, Thomas:
Spinnenseide - was Spiderman wissen sollte.
In: BIOspektrum. Vol. 15 (2009) Issue 1 . - pp. 23-25.

Heim, Markus ; Keerl, David ; Scheibel, Thomas:
Spinnenseide: vom löslichen Protein zur außergewöhnlichen Faser.
In: Angewandte Chemie. Vol. 121 (2009) Issue 20 . - pp. 3638-3650.
DOI: https://doi.org/10.1002/ange.200803341

Hilbrig, Frank ; Jérôme, Valérie ; Salzig, Mark ; Freitag, Ruth:
Strategy for the isolation of native dehydrogenases with potential for biosensor development from the organism Hyphomicrobium zavarzinii ZV580.
In: Journal of Chromatography A. Vol. 1216 (2009) Issue 16 . - pp. 3518-3525.
DOI: https://doi.org/10.1016/j.chroma.2008.09.020

Hagenau, Anja ; Scheidt, Holger A. ; Serpell, Louise ; Huster, Daniel ; Scheibel, Thomas:
Structural Analysis of Proteinaceous Components in Byssal Threads of the Mussel Mytilus galloprovincialis.
In: Macromolecular Bioscience. Vol. 9 (2009) Issue 2 . - pp. 162-168.
DOI: https://doi.org/10.1002/mabi.200800271

Ruckdäschel, Holger:
Trends in Polymer Foam Research.
In: Blowing agents and foaming processes 2009 : 11th international conference ; Hamburg, Germany, 19 - 20 May 2009. - Shawbury : Smithers RAPRA, 2009

Mucha, H. ; Kim, Y. E. ; Kuroda, K. ; Wielage, Bernhard ; Krenkel, Walter:
Untersuchungen zur Entstehung von Porosität in Phenolharzmatrices bei der Härtung.
In: Verbundwerkstoffe. - Weinheim : WILEY-VCH, 2009 . - pp. 226-232
DOI: https://doi.org/10.1002/9783527627110.ch31

Parisot, Judicaël ; Kurz, Katrin ; Hilbrig, Frank ; Freitag, Ruth:
Use of azobenzene amino acids as photo-responsive conformational switches to regulate antibody–antigen interaction.
In: Journal of Separation Science. Vol. 32 (2009) Issue 10 . - pp. 1613-1624.
DOI: https://doi.org/10.1002/jssc.200800698

Krenkel, Walter:
Verbundwerkstoffe.
Weinheim, Germany : WILEY-VCH , 2009 . - 725 p.

Krenkel, Walter ; Keerl, David ; Bauer, Felix ; Hardy, John G. ; Slotta, Ute ; Scheibel, Thomas:
Verspinnen von Proteinfasern für technische Anwendungen.
In: Krenkel, Walter (ed.): Verbundwerkstoffe : 17. Symposium Verbundwerkstoffe und Werkstoffverbunde. - Weinheim : Wiley-VCH, 2009 . - pp. 689-692
DOI: https://doi.org/10.1002/9783527627110.ch97

Krammer, Carmen ; Kryndushkin, Dmitry ; Suhre, Michael H. ; Kremmer, Elisabeth ; Hofmann, Andreas ; Pfeifer, Alexander ; Scheibel, Thomas ; Wickner, Reed B. ; Schätzl, Hermann M. ; Vorberg, Ina M.:
The yeast Sup35NM domain propagates as a prion in mammalian cells.
In: Proceedings of the National Academy of Sciences of the United States of America. Vol. 106 (2009) Issue 2 . - pp. 462-467.
DOI: https://doi.org/10.1073/pnas.0811571106

Faisal, A. Aldo ; Wolpert, Daniel M.:
Near Optimal Combination of Sensory and Motor Uncertainty in Time During a Naturalistic Perception-Action Task.
In: Journal of Neurophysiology. Vol. 101 (2009) Issue 4 . - pp. 1901-1912.
DOI: https://doi.org/10.1152/jn.90974.2008

2008

Krenkel, Walter:
Grundlagen keramischer Faserverbundstrukturen.
2008
Event: Cluster Treff "Keramische Faserverbundstrukturen - Prozesskette und Anwendungspotentiale" Fraunhofer-Institut für Silicatforschung (ISC) , 25.11.2008 , Würzburg, Deutschland.
(Conference item: Conference , Speech )

Krenkel, Walter:
Non-Brittle CMCs for High-Temperature Applications.
2008
Event: 9th International Symposium on Ceramic Materials and Components for Energy and Environmental Applications , 10.-14.11.2008 , Shanghai, China.
(Conference item: Conference , Speech )

Spörrer, Andreas N. J. ; Bangarusampath, D. S. ; Altstädt, Volker:
Foam injection molding of very-low density and thin-walled parts for lightweight design.
2008
Event: FOAMS 2008 TopCon , 10.-11.09.2008 , Charlotte, NC, USA.
(Conference item: Conference , Speech )

Altstädt, Volker ; Arnold, Ulrich ; Barriau, Emilie ; Döring, Manfred ; Wolff-Fabris, Felipe ; Roth, Marcel ; Schmidt-Freytag, Ulrike:
Flammhemmende Additive : Flame-Retardant Additives.
DE102007041988A1 (2008)

Gutmann, Peter ; Ruckdäschel, Holger ; Bangarusampath, D. S. ; Altstädt, Volker ; Schmalz, Holger ; Müller, Axel H. E.:
Batch-foaming of multiphase blend systems varying the viscosity ratio.
2008
Event: 24th PPS International Meeting , 15.-19.06.2008 , Salerno, Italia.
(Conference item: Conference , Speech )

Ruckdäschel, Holger ; Gutmann, Peter ; Greiner, C. ; Müller, Axel H. E. ; Altstädt, Volker:
Novel cellular materials by foaming nanostructured blends and nano-reinforced polymers.
2008
Event: 24th PPS International Meeting , 15.-19.06.2008 , Salerno, Italia.
(Conference item: Conference , Speech )

Spörrer, Andreas N. J. ; Altstädt, Volker:
Structural foams having moderate thickness and ultra-low density prepared by a new injection moulding process.
2008
Event: 24th PPS International Meeting , 15.-19.06.2008 , Salerno, Italia.
(Conference item: Conference , Speech )

Krenkel, Walter:
Neue Möglichkeiten mit verstärkten Keramiken.
2008
Event: Material Innovativ , 10.04.2008 , Nürnberg, Deutschland.
(Conference item: Lecture series , Speech )

10 Jahre FAN.
Fakultät für Angewandte Naturwissenschaften, Universität Bayreuth

Bayreuth , 2008 . - 54 Seiten

Rammensee, Sebastian ; Slotta, Ute ; Scheibel, Thomas ; Bausch, Andreas R.:
Assembly mechanism of recombinant spider silk proteins.
In: Proceedings of the National Academy of Sciences of the United States of America. Vol. 105 (2008) Issue 18 . - pp. 6590-6595.
DOI: https://doi.org/10.1073/pnas.0709246105

Liebscher, Christian H. ; Preußner, Johannes ; Völkl, Rainer ; Glatzel, Uwe:
Atomic site location by channelling enhanced microanalysis (ALCHEMI) in γ′-strengthened Ni- and Pt-base alloys.
In: Acta Materialia. Vol. 56 (2008) Issue 16 . - pp. 4267-4276.
DOI: https://doi.org/10.1016/j.actamat.2008.04.044

Krenkel, Walter:
Beiträge der Forschungsinstitute in „Ceramic Composites“.
2008
Event: Industrietreffen „Ceramic Composites“ , 17. April 2008.
(Conference item: Lecture series , Speech )

Slotta, Ute ; Rammensee, Sebastian ; Gorb, Stanislav ; Scheibel, Thomas:
Bildung von Mikrokugeln eines rekombinanten Spinnenseidenproteins.
In: Angewandte Chemie. Vol. 120 (2008) Issue 24 . - pp. 4668-4670.
DOI: https://doi.org/10.1002/ange.200800683

Flores, Octavio ; Günthner, Martin ; Motz, Günter ; Krenkel, Walter:
BN-filled preceramic polymers as barrier coatings on steel.
2008
Event: International Symposium for Research Scholars on Metallurgy, Materials Science and Engineering (ISRS-2008) , 10.-12. Dezember 2008 , Madras, Indien.
(Conference item: Conference , Paper )

Preußner, Johannes ; Prins, Sara ; Wenderoth, Markus ; Völkl, Rainer ; Glatzel, Uwe:
Building a Thermodynamic Database for Platinum-Based Superalloys: Part III.
In: Platinum Metals Review. Vol. 52 (2008) Issue 1 . - pp. 48-51.
DOI: https://doi.org/10.1595/147106708X255167

Krenkel, Walter:
Ceramic Matrix Composites.
Weinheim, Germany : WILEY-VCH , 2008 . - 418 p.

Motz, Tilman ; Hillenbrand, J. ; Zhang, X. ; Behrendt, N. ; von Salis-Soglio, Cosima ; Erhard, Dominik P. ; Altstädt, Volker ; Schmidt, Hans-Werner ; Sessler, Gerhard M.:
Charge decay of electron-beam irradiated Polypropylene films containing additives.
In: 13th International Symposium on Electrets : Proceedings. - Piscataway, NJ : IEEE, 2008
DOI: https://doi.org/10.1109/ISE.2008.4814016

Lovera, Deliani ; Altstädt, Volker ; Schmidt, Hans-Werner:
Charge storage of compact and fibrous blends based on polyphenylene ether.
In: 13th International Symposium on Electrets : Proceedings. - Piscataway, NJ : IEEE, 2008
DOI: https://doi.org/10.1109/ISE.2008.4814015

Renz, Ralph ; Krenkel, Walter:
CMCs for Friction Applications.
In: Krenkel, Walter (ed.): Ceramic Matrix Composites : Fiber Reinforced Ceramics and their Applications. - Weinheim : WILEY-VCH, 2008 . - pp. 385-407
DOI: https://doi.org/10.1002/9783527622412.ch16

Krenkel, Walter:
Computertomographie für die Werkstoffforschung.
2008
Event: Bayreuther Forum Medizin und Universität , 28. Mai 2008 , Bayreuth.
(Conference item: Lecture series , Speech )

Ruckdäschel, Holger ; Bangarusampath, D. S. ; Greiner, C. ; Gutmann, Peter ; Gebhardt, Matthias ; Türke, C. ; Spörrer, Andreas N. J. ; Fischer, F. ; Altstädt, Volker ; Müller, Axel H. E.:
Development of novel cellular materials via foaming of nanoreinforced polymers and multiphase blends.
In: Blowing agents and foaming processes 2008. - Shawbury : Smithers Rapra, 2008

Achmann, Sabine ; Hermann, Markus ; Hilbrig, Frank ; Jérôme, Valérie ; Hämmerle, Martin ; Freitag, Ruth ; Moos, Ralf:
Direct detection of formaldehyde in air by a Novel NAD⁺- and glutathione-independent formaldehyde dehydrogenase-Based biosensor.
In: Talanta. Vol. 75 (2008) Issue 3 . - pp. 786-791.
DOI: https://doi.org/10.1016/j.talanta.2007.12.015

Bangarusampath, D. S. ; Altstädt, Volker ; Ruckdäschel, Holger ; Sandler, Jan K. W. ; Shaffer, Milo S. P.:
Dispergierung von carbon nanotubes in poly(ether ether keton) und deren Effekte auf die rheologischen und elektrischen Eigenschaften.
In: Zeitschrift Kunststofftechnik = Journal of Plastics Technology. Vol. 4 (2008) Issue 6 .

Weiss, Agnes ; Jérôme, Valérie ; Freitag, Ruth ; Mayer, Helmut K.:
Diversity of the resident microbiota in a thermophilic municipal biogas plant.
In: Applied Microbiology and Biotechnology. Vol. 81 (2008) Issue 1 . - pp. 163-173.
DOI: https://doi.org/10.1007/s00253-008-1717-6

Götz, C. ; Fischer, F. ; El Fray, Miroslawa ; Piatek, M. ; Lim, G. T. ; Altstädt, Volker:
Dynamic creep and fatigue performance of thermoplastic elastomers as biomaterials.
In: PPS-24 : the Polymer Processing Society 24th Annual Meeting. - Melville, NY : Polymer Processing Society, 2008

Römer, Lin ; Scheibel, Thomas:
The elaborate structure of spider silk : Structure and function of a natural high performance fiber.
In: Prion. Vol. 2 (2008) Issue 4 . - pp. 154-161.
DOI: https://doi.org/10.4161/pri.2.4.7490

Freimark, Denise:
Entwicklung und Charakterisierung von Bioprozessen zur Produktion osteoinduktiver Wachstumsfaktoren in Chinese-Hamster-ovary-Zellen.
Berlin : Köster , 2008 . - XII, 241 p. - (Wissenschaftliche Schriftenreihe Bioprozesstechnik ; 1 )
( Doctoral thesis, 2008, Universität Bayreuth, Fakultät für Ingenieurwissenschaften)

Völkl, Rainer ; Fischer, Bernd ; Beschliesser, Manuel ; Glatzel, Uwe:
Evaluating strength at ultra-high temperatures - methods and results.
In: Materials Science and Engineering: A. Vol. 483-484 (2008) . - pp. 587-589.
DOI: https://doi.org/10.1016/j.msea.2006.09.171

Stocker-Majd, Gisela ; Hilbrig, Frank ; Freitag, Ruth:
Extraction of haemoglobin from human blood by affinity precipitation using a haptoglobin-based stimuli–responsive affinity macroligand.
In: Journal of Chromatography A. Vol. 1194 (2008) Issue 1 . - pp. 57-65.
DOI: https://doi.org/10.1016/j.chroma.2008.03.091

Jérôme, Valérie ; Hermann, Markus ; Hilbrig, Frank:
A fast method for the quantification of methylamine in fermentation broths by gas chromatography.
In: Journal of Chromatography B. Vol. 861 (2008) Issue 1 . - pp. 88-94.
DOI: https://doi.org/10.1016/j.jchromb.2007.11.027

Liebmann, Burkhard ; Hümmerich, Daniel ; Scheibel, Thomas ; Fehr, Marcus:
Formulation of poorly water-soluble substances using self-assembling spider silk protein.
In: Colloids and Surfaces A: Physicochemical and Engineering Aspects. Vol. 331 (2008) Issue 1-2 . - pp. 126-132.
DOI: https://doi.org/10.1016/j.colsurfa.2008.04.005

Geisler, Michael ; Pirzer, Tobias ; Ackerschott, Christian B. ; Lud, Simon Q. ; Garrido, Jose A. ; Scheibel, Thomas ; Hugel, Thorsten:
Hydrophobic and Hofmeister Effects on the Adhesion of Spider Silk Proteins onto Solid Substrates: An AFM-Based Single-Molecule Study.
In: Langmuir. Vol. 24 (2008) Issue 4 . - pp. 1350-1355.
DOI: https://doi.org/10.1021/la702341j

Kroeker, Lena:
"Ich war wie eine Schlafwandlerin" : Sonderbehandlung von HIV/AIDS-Betroffenen in ihrer Familie.
In: Röschenthaler, Ute ; Diawara, Mamadou (ed.): Im Blick der Anderen : auf ethnologischer Forschung in Mali. - Frankfurt/M. : Brandes & Apsel, 2008 . - pp. 70-89 . - (Wissen & Praxis ; 147 )

Wenderoth, Markus ; Vorberg, Stefan ; Fischer, Bernd ; Yamabe-Mitarai, Y. ; Harada, H. ; Glatzel, Uwe ; Völkl, Rainer:
Influence of Nb, Ta and Ti on microstructure and high-temperature strength of precipitation-hardened Pt-base alloys.
In: Materials Science and Engineering: A. Vol. 483-484 (2008) . - pp. 509-511.
DOI: https://doi.org/10.1016/j.msea.2006.12.160

Lovera, Deliani ; Altstädt, Volker ; Schmidt, Hans-Werner:
Influence of the polymer chemical structure on the charge storage of polymer blends.
In: 13th International Symposium on Electrets : Proceedings. - Piscataway, NJ : IEEE, 2008
DOI: https://doi.org/10.1109/ISE.2008.4814085

Krenkel, Walter:
Keramische Verbundwerkstoffe.
In: Moeller, Elvira (ed.): Handbuch Konstruktionswerkstoffe : Auswahl, Eigenschaften, Anwendung. - München : Hanser-Verlag, 2008 . - pp. 753-769

Mucha, H. ; Wielage, Bernhard ; Krenkel, Walter:
Liquid Silicon-Infiltration of C-Matrices Derived from Phenolic Resins.
In: Proceedings of Composite Engineering and Design, Vancouver, Canada. - Vancouver , 2008

Vendrely, Charlotte ; Ackerschott, Christian B. ; Römer, Lin ; Scheibel, Thomas:
Molecular design of performance proteins with repetitive sequences: recombinant flagelliform spider silk as basis for biomaterials.
In: Gazit, Ehud ; Nussinov, Ruth (ed.): Nanostructure design : methods and protocols. - Totowa, NJ : Humana Press, 2008 . - pp. 3-14 . - (Methods in Molecular Biology ; 474 )
DOI: https://doi.org/10.1007/978-1-59745-480-3_1

Hausherr, Jan-Marcel ; Krenkel, Walter:
Non-Destructive Testing Techniques for CMC Materials.
In: Krenkel, Walter (ed.): Ceramic Matrix Composites : fiber reinforced ceramics and their applications. - Weinheim : WILEY-VCH, 2008 . - pp. 261-285
DOI: https://doi.org/10.1002/9783527622412.ch11

Lim, Goy Teck ; Foreman-Orlowski, Elizabeth ; Pavka, Paul ; Götz, Christian ; Altstädt, Volker ; Puskas, Judit E.:
Novel High Temperature Styrenic TPE Nanocomposites.
In: 174th technical meeting of the Rubber Division, American Chemical Society 2008. - Red Hook, NY : Curran, 2008

Ruckdäschel, Holger ; Sandler, Jan K. W. ; Altstädt, Volker:
On the Friction and Wear of Carbon Nanofiber-Reinforced PEEK-Based Polymer Composites.
In: Friedrich, Klaus ; Schlarb, Alois K. (ed.): Tribology of Polymeric Nanocomposites : friction and wear of bulk materials and coatings. - Amsterdam : Elsevier, 2008 . - pp. 149-208
DOI: https://doi.org/10.1016/S1572-3364(08)55008-7

Hardy, John G. ; Römer, Lin ; Scheibel, Thomas:
Polymeric materials based on silk proteins.
In: Polymer. Vol. 49 (2008) Issue 20 . - pp. 4309-4327.
DOI: https://doi.org/10.1016/j.polymer.2008.08.006

Krammer, Carmen ; Suhre, Michael H. ; Kremmer, Elisabeth ; Diemer, Claudia ; Hess, Simone ; Schätzl, Hermann M. ; Scheibel, Thomas ; Vorberg, Ina M.:
Prion protein/protein interactions: fusion with yeast Sup35p-NM modulates cytosolic PrP aggregation in mammalian cells.
In: The FASEB Journal. Vol. 22 (2008) Issue 3 . - pp. 762-773.
DOI: https://doi.org/10.1096/fj.07-8733com

Lammel, Andreas ; Schwab, Martin ; Slotta, Ute ; Winter, Gerhard ; Scheibel, Thomas:
Processing conditions for the formation of spider silk microspheres.
In: ChemSusChem. Vol. 1 (2008) Issue 5 . - pp. 413-416.
DOI: https://doi.org/10.1002/cssc.200800030

Lammel, Andreas ; Keerl, David ; Römer, Lin ; Scheibel, Thomas:
Proteins: Polymers of natural origin.
In: Hu, Jie (ed.): Recent Advances in Biomaterials Research. - Trivandrum : Transworld Research Network, 2008 . - p. 1

Stocker, Gisela ; Dumoulin, Dorothée ; Vandevyver, Caroline ; Hilbrig, Frank ; Freitag, Ruth:
Screening of a human antibody phage display library against a peptide antigen using stimuli-responsive bioconjugates.
In: Biotechnology Progress. Vol. 24 (2008) Issue 6 . - pp. 1314-1324.
DOI: https://doi.org/10.1002/btpr.60

Römer, Lin ; Scheibel, Thomas:
Spinnen wie die Spinnen.
In: Nachrichten aus der Chemie. Vol. 56 (2008) Issue 5 . - pp. 516-519.
DOI: https://doi.org/10.1002/nadc.200854733

Weidenauer, Uwe ; Scheibel, Thomas:
Spinnenseidenproteine als pharmazeutischer Hilfsstoff.
In: Deutsche Apotheker-Zeitung. Vol. 148 (2008) Issue 29 . - pp. 3152-3154.

Erhard, Dominik P. ; Giesa, Reiner ; Altstädt, Volker ; Schmidt, Hans-Werner:
Synthesis and characterization of fluorinated poly(ether imide)s and their application as electret materials.
In: 13th International Symposium on Electrets : Proceedings. - Piscataway, NJ : IEEE, 2008
DOI: https://doi.org/10.1109/ISE.2008.4814082

Freitag, Ruth ; Hilbrig, Frank:
Use of the avidin (imino)biotin system as a general approach to affinity precipitation.
In: McMahon, Robert J. (ed.): Avidin-Biotin interactions : methods and applications. - Totowa, NJ : Humana Press, 2008 . - pp. 35-50 . - (Methods in Molecular Biology ; 418 )

Kurz, H. ; Täger, O. ; Ferkel, H. ; Hufenbach, W. ; Lepper, M. ; Altstädt, Volker ; Apeldorn, Thomas:
Verarbeitung von Faser-Thermoplast-Schichtverbunden.

2008

Krenkel, Walter:
Verbundkeramik für die Energie und Antriebstechnik.
2008
Event: Kolloquium Vision Keramik 2008+, Fraunhofer IKTS , 17.-18. Januar 2008 , Dresden, Deutschland.
(Conference item: Other Event type, Speech )

Krenkel, Walter:
Zerstörungsfreie Bauteilprüfung.
2008
Event: 121. Sitzung des DGZfP, Arbeitskreis Franken , 3. März 2008 , Bayreuth.
(Conference item: Other Event type, Speech )

Krenkel, Walter:
Zerstörungsfreie Bauteilprüfung mittels CT-Prüfung von Werkstoffen und Strukturen mit Hilfe einer hochmodernen Computertomografie-Anlage.
2008
Event: Initiative Technologiebrücke „Gemeinsam Wettbewerbsvorteile schaffen!“ , 20. Februar 2008 , Thurnau, Deutschland.
(Conference item: Workshop , Speech )

Faisal, A. Aldo ; Wolpert, Daniel M.:
How to combine old and new sensory information?
2008
Event: 5th Computational and Systems Neuroscience Meeting (Cosyne 2008) , 28.02.-04.03.2008 , Salt Lake City, USA.
(Conference item: Conference , Paper )

Faisal, A. Aldo ; Selen, Luc P. J. ; Wolpert, Daniel M.:
Noise in the nervous system.
In: Nature Reviews Neuroscience. Vol. 9 (2008) Issue 4 . - pp. 292-303.
DOI: https://doi.org/10.1038/nrn2258

Faisal, A. Aldo ; Laughlin, Simon B.:
Scaling relationships for neuronal circuit wiring set by noise and metabolic cost.
2008
Event: 5th Computational and Systems Neuroscience Meeting (Cosyne 2008) , 28.02.-04.03.2008 , Salt Lake City, USA.
(Conference item: Conference , Paper )

2007

Altstädt, Volker ; Arnold, Ulrich ; Barriau, Emilie ; Döring, Manfred ; Wolff-Fabris, Felipe ; Roth, Marcel ; Sandler, Jan K. W. ; Schmidt-Freytag, Ulrike:
Metallverbindungen als Initiatoren : Metal Compounds for Use as Initiators.
DE102006057142A1 (2007)

Botelho, Kilça T. ; Sanches, Alaor A. F. ; Diaz, Francisco R.V. ; Fabris, Felipe W. ; Altstädt, Volker:
Toughness enhancement of the RTM6 System employing engineering thermoplastics and block-copolymer.
2007
Event: 9º Congresso Brasileiro de Polímeros , 07.-11.10.2007 , Campina Grande, Paraíba, Brasilien.
(Conference item: Conference , Speech )

Maruschke, Julian ; Rosemann, Bernd ; Steinhilper, Rolf:
Evaluation of eco-efficient car lifecycles.
In: University of Zurich (ETH) (ed.): Conference Proceedings of the 3rd International Conference on Life Cycle Management, LCM 2007. - Zürich , 2007

Ruckdäschel, Holger ; Altstädt, Volker ; Müller, Volker H. E.:
Tailoring of Cellular Polymers by Blending.
2007
Event: PPS 23 : The Polymer Processing Society 23th Annual Meeting , 23.-31.05.2007 , Salvador, Brazil.
(Conference item: Conference , Paper )

Freitag, Ruth ; Schumacher, Ivo ; Hilbrig, Frank:
Affinity precipitation an option for early capture in bioprocessing.
In: Biotechnology Journal. Vol. 2 (2007) Issue 6 . - pp. 685-690.
DOI: https://doi.org/10.1002/biot.200600200

Rosemann, Bernd ; Brüning, Ralf ; Enderle, Bettina:
Altgeräte : Heisst die Lösung ReUse?
In: Umwelt-Perspektiven. (2007) Issue 4 . - pp. 59-61.

Exler, Josef H. ; Hümmerich, Daniel ; Scheibel, Thomas:
Die amphiphilen Eigenschaften von Spinnenseidenproteinen sind entscheidend für ihr Verspinnen.
In: Angewandte Chemie. Vol. 119 (2007) Issue 19 . - pp. 3629-3632.
DOI: https://doi.org/10.1002/ange.200604718

Rosemann, Bernd ; Brüning, Ralf ; Enderle, Bettina:
Ausgediente Elektronik erwacht zu neuem Leben? : Richtlinienausschuss VDI 2343 adressiert auch die Wiederverwendung.
In: Recycling-Magazin. Vol. 62 (2007) Issue 10 . - pp. 28-29.

Cornish, Lesley A. ; Süss, Rainer ; Watson, Andy ; Preußner, Johannes ; Prins, Sara ; Wenderoth, Markus ; Völkl, Rainer ; Glatzel, Uwe:
Building a database for the prediction of phases in Pt-based superalloys.
In: Journal of the Southern African Institute of Mining and Metallurgy. Vol. 107 (2007) . - pp. 713-724.

Krenkel, Walter:
Carbon-Fiber Reinforced Ceramic Composites for Industrial Applications.
2007
Event: The 31st International Cocoa Beach Conference & Exposition on Advanced Ceramics & Composites, USA , 21.-26.01.2007 , Daytona Beach, Florida, USA.
(Conference item: Conference , Speech )

Krenkel, Walter:
Ceramic Matrix Composites in Tribological Applications.
2007
Event: 6th International Conference on High Temperature Ceramic Matrix Composites (HTCMC 6) , 04.-07.09.2007 , New Delhi, India.
(Conference item: Conference , Speech )

Schubert, Sven ; Freitag, Ruth:
Comparison of ceramic hydroxy- and fluoroapatite versus Protein A/G-based resins in the isolation of a recombinant human antibody from cell culture supernatant.
In: Journal of Chromatography A. Vol. 1142 (2007) Issue 1 . - pp. 106-113.
DOI: https://doi.org/10.1016/j.chroma.2006.08.075

Weiss, Agnes ; Jérôme, Valérie ; Freitag, Ruth:
Comparison of strategies for the isolation of PCR-compatible, genomic DNA from a municipal biogas plants.
In: Journal of Chromatography B. Vol. 853 (2007) Issue 1-2 . - pp. 190-197.
DOI: https://doi.org/10.1016/j.jchromb.2007.03.009

Schmidt, Martin ; Römer, Lin ; Strehle, Martin ; Scheibel, Thomas:
Conquering isoleucine auxotrophy of Escherichia coli BLR(DE3) to recombinantly produce spider silk proteins in minimal media.
In: Biotechnology Letters. Vol. 29 (2007) Issue 11 . - pp. 1741-1744.
DOI: https://doi.org/10.1007/s10529-007-9461-z

Wloka, J. ; Laukant, Holger ; Glatzel, Uwe ; Virtanen, S.:
Corrosion properties of laser beam joints of aluminium with zinc-coated steel.
In: Corrosion Science. Vol. 49 (2007) Issue 11 . - pp. 4243-4258.
DOI: https://doi.org/10.1016/j.corsci.2007.04.014

Krenkel, Walter:
Cost Efficient Approaches for the Manufacture of C/SiC Composites.
2007
Event: 6th International Conference on High Temperature Ceramic Matrix Composites (HTCMC 6) , 04.-07.09.2007 , New Delhi, India.
(Conference item: Conference , Speech )

Jérôme, Valérie ; Hermann, Markus ; Hilbrig, Frank ; Freitag, Ruth:
Development of a fed-batch process for the production of a dye-linked formaldehyde dehydrogenase in Hyphomicrobium zavarzinii ZV 580.
In: Applied Microbiology and Biotechnology. Vol. 77 (2007) Issue 4 . - pp. 779-788.
DOI: https://doi.org/10.1007/s00253-007-1218-z

Lodderstedt, Grit ; Hess, Simone ; Hause, Gerd ; Scheuermann, Till ; Scheibel, Thomas ; Schwarz, Elisabeth:
Effect of oculopharyngeal muscular dystrophy-associated extension of seven alanines on the fibrillation properties of the N-terminal domain of PABPN1.
In: The FEBS Journal. Vol. 274 (2007) Issue 2 . - pp. 346-355.
DOI: https://doi.org/10.1111/j.1742-4658.2006.05595.x

Krenkel, Walter:
Einführung in die keramischen Verbundwerkstoffe.
2007
Event: DGM-Fortbildungsseminar Keramische Verbundwerkstoffe , 9.-10. Oktober 2007 , Bayreuth.
(Conference item: Conference , Speech )

Krenkel, Walter:
Faserverbundwerkstoffe mit keramischer Matrix.
2007
Event: 13. Nationales Symposium SAMPE Deutschland e.V. Materialien, Verfahren und Anwendungen , 21.-22.02.2007 , Bayreuth, Deutschland.
(Conference item: Conference , Speech )

Ruckdäschel, Holger ; Altstädt, Volker ; Müller, Axel H. E.:
Foaming of polymer blends : Chance and challenge.
In: Cellular Polymers. Vol. 26 (2007) Issue 6 . - pp. 367-380.
DOI: https://doi.org/10.1177/026248930702600602

Rosemann, Bernd:
Die Gefahr der Kollision ist stets präsent.
In: Fertigung : Das Fachmagazin für die Metallbearbeitung. Vol. 35 (2007) . - pp. 98-100.

Galetz, Mathias ; Goetz, C. ; Adam, Peter ; Glatzel, Uwe:
Hysteretic Heating During Cyclic Loading of Medical Grade Ultra High Molecular Weight Polyethylene (UHMWPE).
In: Advanced Engineering Materials. Vol. 9 (2007) Issue 12 . - pp. 1089-1096.
DOI: https://doi.org/10.1002/adem.200700274

Spatschek, Robert ; Fleck, Michael:
Influence of stress on interface kinetics.
In: Philosophical Magazine Letters. Vol. 87 (2007) Issue 11 . - pp. 909-914.
DOI: https://doi.org/10.1080/09500830701416618

O'Mahony, Kevin ; Freitag, Ruth ; Hilbrig, Frank ; Schumacher, Ingo ; Müller, Patrick:
Integration of bacteria capture via filtration and in situ lysis for recovery of plasmid DNA under industry-compatible conditions.
In: Biotechnology Progress. Vol. 23 (2007) Issue 4 . - pp. 895-903.
DOI: https://doi.org/10.1021/bp0701113

Vandevyver, Caroline ; Canarelli, Stéphane ; Bossen, Claudia ; Fisch, Igor ; Motmans, Kris ; Raus, Jef ; Freitag, Ruth:
Investigation and molecular mimicry of the antigen involved in the interaction between the monoclonal antibody 5D10 and the human breast cancer cell line MCF-7.
In: Biotechnology and Bioengineering. Vol. 97 (2007) Issue 4 . - pp. 721-734.
DOI: https://doi.org/10.1002/bit.21276

Wenderoth, Markus ; Vorberg, Stefan ; Fischer, Bernd ; Völkl, Rainer ; Glatzel, Uwe:
Isothermal Oxidation Behavior of a Precipitation-Hardened Pt-Base Alloy with Additions of Al, Cr and Ni.
In: International Journal of Materials Research. Vol. 98 (2007) Issue 6 . - pp. 463-467.
DOI: https://doi.org/10.3139/146.101498

Schrinner, Marc C. ; Polzer, Frank ; Mei, Yu ; Lu, Yan ; Haupt, Björn ; Ballauff, Matthias ; Grödel, Astrid ; Drechsler, Markus ; Preußner, Johannes ; Glatzel, Uwe:
Mechanism of the Formation of Amorphous Gold Nanoparticles within Spherical Polyelectrolyte Brushes.
In: Macromolecular Chemistry and Physics. Vol. 208 (2007) Issue 14 . - pp. 1542-1547.
DOI: https://doi.org/10.1002/macp.200700161

Krenkel, Walter:
Melt-Infiltrated CMCs for Industrial Applications.
2007
Event: Lecture at NASA Glenn Research Center , 21.09.2007 , Cleveland, Ohio, USA.
(Conference item: Other Event type, Speech )

Glatzel, Uwe:
Metalle.
In: Bullinger, Hans-Jörg (ed.): Technologieführer : Grundlagen, Anwendungen, Trends. - Berlin : Springer, 2007 . - pp. 10-15

Wenderoth, Markus ; Völkl, Rainer ; Vorberg, Stefan ; Yamabe-Mitarai, Y. ; Harada, H. ; Glatzel, Uwe:
Microstructure, oxidation resistance and high-temperature strength of γ′ hardened Pt-base alloys.
In: Intermetallics. Vol. 15 (2007) Issue 4 . - pp. 539-549.
DOI: https://doi.org/10.1016/j.intermet.2006.09.009

Zambaldi, C. ; Roters, F. ; Raabe, D. ; Glatzel, Uwe:
Modeling and experiments on the indentation deformation and recrystallization of a single-crystal nickel-base superalloy.
In: Materials Science and Engineering: A. Vol. 454-455 (2007) . - pp. 433-440.
DOI: https://doi.org/10.1016/j.msea.2006.11.068

Rosemann, Bernd:
Moderne Zeiten : Gut gerüstet mit Fertigungssimulation.
In: ShortCuts. (2007) Issue 1 . - pp. 3-6.

Cornish, Lesley A. ; Süss, Rainer ; Völkl, Rainer ; Wenderoth, Markus ; Vorberg, Stefan ; Fischer, Bernd ; Glatzel, Uwe ; Douglas, Alistair ; Chown, Lesley H. ; Murakumo, T. ; Preußner, Johannes ; Lupton, David ; Glaner, Lesley ; Maledi, N. B. ; Potgieter, J. H. ; Sephton, M. ; Williams, G.:
Overview of the development of new Pt-based alloys for high temperature application in aggressive environments.
In: Journal of the Southern African Institute of Mining and Metallurgy. Vol. 107 (2007) . - pp. 697-711.

Hermanson, Kevin D. ; Harasim, Markus B. ; Scheibel, Thomas ; Bausch, Andreas R.:
Permeability of silk microcapsules made by the interfacial adsorption of protein.
In: Physical Chemistry Chemical Physics. Vol. 9 (2007) Issue 48 . - pp. 6442-6446.
DOI: https://doi.org/10.1039/B709808A

Jijun, Dong ; Bloom, Jesse ; Goncharov, Vladimir ; Chattopadhyay, Madhuri ; Millhauser, Glenn L. ; Lynn, David G. ; Scheibel, Thomas ; Lindquist, Susan L.:
Probing the Role of PrP Repeats in Conformational Conversion and Amyloid Assembly of Chimeric Yeast Prions.
In: The Journal of Biological Chemistry. Vol. 282 (2007) Issue 47 . - pp. 34204-34212.
DOI: https://doi.org/10.1074/jbc.M704952200

Slotta, Ute ; Hess, Simone ; Spieß, Kristina ; Stromer, Thusnelda ; Serpell, Louise ; Scheibel, Thomas:
Spider Silk and Amyloid Fibrils : A Structural Comparison.
In: Macromolecular Bioscience. Vol. 7 (2007) Issue 2 . - pp. 183-188.
DOI: https://doi.org/10.1002/mabi.200600201

Römer, Lin ; Scheibel, Thomas:
Spinnenseidenproteine: Grundlage für neue Materialien.
In: Chemie in unserer Zeit. Vol. 41 (2007) Issue 4 . - pp. 306-314.
DOI: https://doi.org/10.1002/ciuz.200700410

Metwalli, Ezzeldin ; Slotta, Ute ; Darko, C. ; Roth, Stephan V. ; Scheibel, Thomas ; Papadakis, C. M.:
Structural changes of thin films from recombinant spider silk proteins upon post-treatment.
In: Applied Physics A. Vol. 89 (2007) Issue 3 . - pp. 655-661.
DOI: https://doi.org/10.1007/s00339-007-4265-5

Freitag, Ruth ; Hilbrig, Frank:
Theory and practical understanding of the migration behavior of proteins and peptides in CE and related techniques.
In: Electrophoresis. Vol. 28 (2007) Issue 13 . - pp. 2125-2144.
DOI: https://doi.org/10.1002/elps.200600792

Scheibel, Thomas ; Römer, Lin ; Spieß, Kristina:
Transparente Folien aus Spinnenseide.
In: GIT : Labor-Fachzeitschrift. Vol. 51 (2007) Issue 11 . - pp. 928-931.

Faisal, A. Aldo ; Laughlin, Simon B.:
Stochastic simulations on the reliability of action potential propagation in thin axons.
In: PLoS Computational Biology. Vol. 3 (2007) Issue 5 . - e79.
DOI: https://doi.org/10.1371/journal.pcbi.0030079

Faisal, A. Aldo:
Studying channelopathies at the functional level using a system identification approach.
In: Siebes, Arno ; Berthold, Michael ; Glen, Robert ; Feelders, Ad (ed.): CompLife 2007. - Melville, NY : American Inst. of Physics, 2007 . - pp. 113-126 . - (AIP Conference Proceedings ; 940 )
DOI: https://doi.org/10.1063/1.2793394

2006

Hausherr, Jan-Marcel ; Fischer, Frank ; Krenkel, Walter ; Altstädt, Volker:
Material Characterisation of C/SiC : Comparison of Computed Tomography and Scanning Electron Mircoscopy.
2006
Event: CDCM 2006 - Conference on Damage in Composite Materials 2006 , 18.-19.09.2006 , Stuttgart, Germany.
(Conference item: Conference , Paper )

Spörrer, Andreas N. J. ; Sandler, Jan K. W. ; Mantey, Axel ; Altstädt, Volker:
Tailored structural foams by foam injection-molding with a specialized mold.
2006
Event: FOAMS 2006 , 13.-14.09.2006 , Chicago, Ill., USA.
(Conference item: Conference , Speech )

Krenkel, Walter:
Faserverbundkeramiken – Werkstoffe für den Hochtemperaturleichtbau.
2006
Event: Vortrag im Fraunhofer Institut für Silikatforschung , 12.05.2006 , Würzburg, Deutschland.
(Conference item: Conference , Speech )

Rosemann, Bernd:
Design for Remanufacturing.
In: SAE Foundation International (ed.): Proceedings SAE World Congress. - Detroit , 2006

Krenkel, Walter:
Advanced C/SiC Composites for Friction Applications.
2006
Event: 11th International Ceramics Congress and 4th Forum on New Materials ; CIMTEC 2006 , 04.-09.06.2006 , Acireale, Italy.
(Conference item: Conference , Speech )

O'Mahony, Kevin ; Freitag, Ruth ; Dhote, Bernhard ; Hilbrig, Frank ; Müller, Patrick ; Schumacher, Ivo:
Capture of Bacteria from Fermentation Broth by Body Feed Filtration : A Solved Problem?
In: Biotechnology Progress. Vol. 22 (2006) Issue 2 . - pp. 471-483.
DOI: https://doi.org/10.1021/bp050302a

Krenkel, Walter:
Carbon Fiber Reinforced Ceramic Matrix Composites for Friction Applications.
2006
Event: 30th International Conference on Advanced Ceramics and Composites , 23.-27.01.2006 , Cocoa Beach, Florida, USA.
(Conference item: Lecture series , Speech )

Krenkel, Walter:
Carbon Fiber Reinforced SiC Composites for High Performance Brake Systems.
2006
Event: Novel and Emerging Ceramics and Composites : ECI-Conference , 25.-30.06.2006 , Kona Coast, Hawaii, USA.
(Conference item: Conference , Speech )

Krenkel, Walter:
Carbon Fiber Reinforced SiC-Ceramics for Advanced Brake Systems.
2006
Event: Seminar , 23.-24.11.2006 , Stezzano, Italy.
(Conference item: Conference , Speech )

Krenkel, Walter:
Carbon-Ceramic Brake Disks.
2006
Event: 2nd Annual International Conference on "Innovative Braking and Chassis Control" : Technology- Materials- NVH- Friction 2006 [IQPC] , 03.-04.04.2006 , Frankfurt a.M., Deutschland.
(Conference item: Conference , Speech )

Krenkel, Walter:
Ceramics in Advanced Braking Systems.
2006
Event: Mellor Memorial Lecture on Materials : Congress 2006 , 05.-07.04.2006 , London, United Kingdom.
(Conference item: Conference , Speech )

Rosemann, Bernd ; Haumann, Michael ; von Bachmann, Heiko:
Chance Produktkreislauf : die produktionsinterne Rückführung von Blistern innerhalb des Verpackungsprozesses reduziert Kosten und schont die Umwelt.
In: Müll-Magazin. Vol. 19 (2006) .

Jérôme, Valérie ; Graser, Andreas ; Müller, Rolf ; Kontermann, Roland E. ; Konur, Abdo:
Cytotoxic T lymphocytes responding to low dose TRP2 antigen are induced against B16 melanoma by liposome-encapsulated TRP2 peptide and CpG DNA adjuvant.
In: Journal of Immunotherapy. Vol. 29 (2006) Issue 3 . - pp. 294-305.
DOI: https://doi.org/10.1097/01.cji.0000199195.97845.18

Dunger, S. ; Sandler, Jan K. W. ; Hedicke, Katrin ; Altstädt, Volker:
Deformation and Fracture Behaviour of Nanocomposites.
In: Gdoutos, E. E. (ed.): Fracture of Nano and Engineering Materials and Structures : Proceedings of the 16th European Conference of Fracture. - Dordrecht : Springer, 2006 . - pp. 93-94
DOI: https://doi.org/10.1007/1-4020-4972-2_45

Pöhner, Claudia ; Hilbrig, Frank ; Jérôme, Valérie ; Freitag, Ruth:
Design and Characterization of Stimuli-Responsive FLAG-tag Analogues and the Illumination-Induced Modulation of Their Interaction with Antibody 4E11.
In: Biotechnology Progress. Vol. 22 (2006) Issue 4 . - pp. 1170-1178.
DOI: https://doi.org/10.1021/bp060011h

Landenberger, Daniel ; Rosemann, Bernd:
Einsatz des Bürstspanens zur Feinbearbeitung.
In: Zeitschrift für wirtschaftlichen Fabrikbetrieb. Vol. 101 (2006) Issue 6 . - pp. 374-377.

Krenkel, Walter:
Faserverbundkeramiken – Werkstoffe für den strukturellen Hochtemperatureinsatz.
2006
Event: IPP-Kolloquium des Max Planck Instituts für Plasmaphysik , 19.10.2006 , Garching, Deutschland.
(Conference item: Conference , Speech )

Freiberger, Stefan ; Landenberger, Daniel ; Wrobel, Stefanie:
FMEA in der Refabrikationsindustrie : Erfassen, bewerten, vermeiden.
In: Quality Engineering : Kontrolle. (2006) Issue 4 .

Sen Gupta, Sayam ; Scheibel, Thomas:
Folding, self-assembly and conformational switches of proteins.
In: Zbilut, Joseph P. ; Scheibel, Thomas (ed.): Protein Folding-Misfolding : Some Current Concepts of Protein Chemistry. - New York : Nova Science Publishers, 2006 . - pp. 1-13

High Temperature Ceramic Matrix Composites.
ed.: Krenkel, Walter ; Schneider, Hartmut ; Naslain, Roger
Weinheim : WILEY-VCH , 2006

DOI: https://doi.org/10.1002/3527605622

Krenkel, Walter:
Keramische Verbundwerkstoffe.
2006
Event: Vorlesung an der Technischen Universität Chemnitz, Lehrstuhl für Verbundwerkstoffe , 11.07.2006 , Chemnitz, Deutschland.
(Conference item: Other Event type, Lecture )

Krenkel, Walter:
Keramische Verbundwerkstoffe für den Hochtemperatur-Leichtbau.
2006
Event: Gründung der FhG-Projektgruppe Keramische Verbundstrukturen , 22.06.2006 , Bayreuth, Deutschland.
(Conference item: Conference , Speech )

Rosemann, Bernd:
Komplettbearbeitung im Computer : NC-Programmierabläufe sorgen für Sicherheit.
In: CAD-CAM. Vol. 25 (2006) Issue 11/12 . - pp. 46-50.

Vendrely, Charlotte ; Scheibel, Thomas:
Mammalian versus yeast prions : biophysical insights in structure and assembly mechanisms.
In: Doupher, Bridgette V. (ed.): Prions : New Research. - New York : Nova Science Publishers, 2006 . - pp. 251-284

Stantschev, Georg ; Frieß, Martin ; Krenkel, Walter:
Manufacturing and Properties of CMCs Containing Ti Filler with Improved Intra-Matrix Bond.
In: Cimtec Proceedings. - Montecatini Terme, Italien , 2006

Rosemann, Bernd ; Brüning, Ralf:
Mehrfacher Nutzen : die Richtlinie VDI 2343 mit dem Schwerpunktthema ReUse gibt Handlungsempfehlungen für die betroffenen Kreise.
In: Müll-Magazin. Vol. 19 (2006) Issue 2 . - pp. 8-14.

Rosemann, Bernd ; Landenberger, Daniel:
Mit den Daten die Messmaschine füttern : Prozesssicherung mit 3D-Koordinatenmesstechnik.
In: CAD-CAM. Vol. 25 (2006) Issue 7/8 . - pp. 54-56.

Junghans, F. ; Morawietz, M. ; Conrad, U. ; Scheibel, Thomas ; Heilmann, A. ; Spohn, U.:
Preparation and mechanical properties of layers made of recombinant spider silk proteins and silk from silk worm.
In: Applied Physics A. Vol. 82 (2006) Issue 2 . - pp. 253-260.
DOI: https://doi.org/10.1007/s00339-005-3432-9

Hümmerich, Daniel ; Slotta, Ute ; Scheibel, Thomas:
Processing and modification of films made from recombinant spider silk proteins.
In: Applied Physics A. Vol. 82 (2006) Issue 2 . - pp. 219-222.
DOI: https://doi.org/10.1007/s00339-005-3428-5

Rosemann, Bernd ; Steinhilper, Rolf ; Freiberger, Stefan:
Product and Process Assessment for Remanufacturing of Computer Controlled Automotive Components.
In: Duflou, Joost R. (ed.): Towards a closed loop economy : LCE 2006 ; proceedings. Band 2. - Leuven : Katholieke Univ., 2006 . - pp. 441-446

Rosemann, Bernd ; Rieg, Frank ; Hackenschmidt, Reinhard ; Landenberger, Daniel:
Programmieren von CNC-Koordinatenmessmaschinen mit CAD/CMM-Systemen.
In: Rieg, Frank (ed.): Tagungsband: 8. Bayreuther 3D-Konstrukteurstag. - Bayreuth : Lehrstuhl für Konstruktionslehre und CAD, Universität Bayreuth, 2006

Buchner, Johannes ; Scheibel, Thomas:
Protein Aggregation as a Cause for Disease.
In: Starke, Br. K. ; Gaestel, Matthias (ed.): Molecular chaperones in Health and Disease. - Berlin : Springer, 2006 . - pp. 199-219 . - (Handbook of Experimental Pharmacology ; 172 )
DOI: https://doi.org/10.1007/3-540-29717-0_9

Stocker, Gisela ; Vandevyver, Caroline ; Hilbrig, Frank ; Freitag, Ruth:
Purification of RT-PCR Competent Poly(A) mRNA from Crude Cell Lysate by Affinity Precipitation.
In: Biotechnology Progress. Vol. 22 (2006) Issue 6 . - pp. 1621-1629.
DOI: https://doi.org/10.1021/bp060095u

Mauder, Matthias:
Quality Assurance for Eddy Covariance Measurements of Turbulent Fluxes and its Influence on the Energy Balance Closure Problem.
Bayreuth , 2006 . - X, 167 p.
( Doctoral thesis, 2006 , Universität Bayreuth, Fakultät für Biologie, Chemie und Geowissenschaften)

Lietz, Siljana ; Sandler, Jan K. W. ; Hedicke, Katrin ; Altstädt, Volker:
Reinforcement of delicate polymer structures by high anisotropic nanofillers.
In: High performance fillers. - Shawbury : Rapra Technology Ltd., 2006

Rammensee, Sebastian ; Hümmerich, Daniel ; Hermanson, Kevin D. ; Scheibel, Thomas ; Bausch, Andreas R.:
Rheological characterization of hydrogels formed by recombinantly produced spider silk.
In: Applied Physics A. Vol. 82 (2006) Issue 2 . - pp. 261-264.
DOI: https://doi.org/10.1007/s00339-005-3431-x

Scheibel, Thomas:
Silk : a biomaterial with several facets.
In: Applied Physics A. Vol. 82 (2006) . - pp. 191-192.
DOI: https://doi.org/10.1007/s00339-005-3434-7

Zbilut, Joseph P. ; Scheibel, Thomas ; Hümmerich, Daniel ; Webber Jr., Charles L. ; Colafranceschi, Mauro ; Giuliani, Alessandro:
Statistical approaches for investigating silk properties.
In: Applied Physics A. Vol. 82 (2006) Issue 2 . - pp. 243-251.
DOI: https://doi.org/10.1007/s00339-005-3429-4

Slotta, Ute ; Tammer, Michael ; Kremer, Friedrich ; Koelsch, Patrick ; Scheibel, Thomas:
Structural Analysis of Spider Silk Films.
In: Supramolecular Chemistry. Vol. 18 (2006) Issue 5 . - pp. 465-471.
DOI: https://doi.org/10.1080/10610270600832042

Wallmann, Clemens ; Laukant, Holger ; Glatzel, Uwe:
Thermisches Fügen für die stahlintensive Hybridbauweise im Fahrzeugleichtbau : (AVIF A 185).
Frankfurt : Verband der Automobilindustrie , 2006 . - (FAT-Schriftenreihe ; 200 )

2005

Spörrer, Andreas N. J. ; Sandler, Jan K. W. ; Roth, S. ; Altstädt, Volker:
Potenzial der Spritzgießcompoundierung zur Fertigung von langfaserverstärkten und hochgefüllten Thermoplasten.
2005
Event: Technomer , 10.-12.11.2005 , Chemnitz, Deutschland.
(Conference item: Conference , Speech )

Spörrer, Andreas N. J. ; Sandler, Jan K. W. ; Roth, S. ; Altstädt, Volker:
Direct compounding of long-fibre reinforced thermoplastics and evaluation of the mechanical composite properties.
2005
Event: Bayreuth Polymer Symposium 2005 , 18.-20.09.2005 , Bayreuth, Deutschland.
(Conference item: Conference , Speech )

Rosemann, Bernd:
Bessere Materialeffizienz spart Firmen bares Geld.
In: ASK - Access to Sustainable Knowledge.
2005

Junger, Andreas ; Kaufmann, Doris ; Scheibel, Thomas ; Weberskirch, Ralf:
Biosynthesis of an Elastin-Mimetic Polypeptide with Two Different Chemical Functional Groups within the Repetitive Elastin Fragment.
In: Macromolecular Bioscience. Vol. 5 (2005) Issue 6 . - pp. 494-501.
DOI: https://doi.org/10.1002/mabi.200400213

Berndt, Florian ; Krenkel, Walter:
C/C-SiC Composites for Space Applications and Advanced Friction Systems.
In: Materials Science and Engineering: A. Vol. 412 (2005) Issue 1-2 . - pp. 177-181.
DOI: https://doi.org/10.1016/j.msea.2005.08.204

Rosemann, Bernd ; Freiberger, Stefan ; Landenberger, Daniel:
CAD/CAM mit Pro/Engineer : Einstieg in die NC-Programmierung.
München : Hanser , 2005 . - 324 p.

Review:

Peter Constructor

Rosemann, Bernd:
CAM-Integration mit Pro/NC : Flexibilität, Effizienz und Prozesssicherheit von der Geometrie bis zum Erzeugnis?
In: Tagungsband: 7. Bayreuther 3D-Konstrukteurstag am 5. Oktober 2005. - Bayreuth : Lehrstuhl für Konstruktionslehre und CAD, Universität Bayreuth, 2005

Krenkel, Walter:
Carbon Fibre Reinforced Silicon Carbide Composites (C/SiC, C/C-SiC).
In: Bansal, Narottam P. (ed.): Handbook of Ceramic Composites. - Boston, MA : Kluwer Academic Publishers, 2005 . - pp. 117-148
DOI: https://doi.org/10.1007/0-387-23986-3_6

Frieß, Martin ; Kochendörfer, Richard ; Brandt, Rüdiger ; Neuer, Günther ; Maier, Hans-Peter ; Krenkel, Walter:
Ceramic Matrix Composites : The Key Materials for Re-Entry From Space to Earth.
In: Jacob, Dieter ; Sachs, G. ; Wagner, S. (Eds.): Basic Research and Technologies for Two-Stage-to Orbit Vehicles. - Weinheim : Wiley-VCH, 2005 . - pp. 499-526

Ruckdäschel, Holger ; Schmalz, Holger ; Altstädt, Volker ; Müller, Axel H. E.:
Compatibilisation of immiscible blends by triblock terpolymers : Influence of molecular architecture on morphology and properties.
In: Radusch, Hans-Joachim (ed.): PPS-21 : Polymer Processing Society, twenty first annual meeting. - Halle-Wittenberg : Martin Luther Univ., 2005

Sandler, Jan K. W. ; Dunger, S. ; Altstädt, Volker:
Delicate polymer nanocomposite structures.
In: Radusch, Hans-Joachim (ed.): PPS-21 : Polymer Processing Society, twenty first annual meeting. - Halle-Wittenberg : Martin Luther Univ., 2005

Freiberger, Stefan ; Rosemann, Bernd ; Steinhilper, Rolf:
Design for Recycling and Remanufacturing of Fuel Cells.
In: Fourth International Symposium on Environmentally Conscious Design and Inverse Manufacturing, 2005, Eco Design 2005. - Tokyo : Union of EcoDesigners, 2005 . - pp. 466-471
DOI: https://doi.org/10.1109/ECODIM.2005.1619268

Langenfelder, D. ; Sandler, Jan K. W. ; Altstädt, Volker:
Development of a foamed thermoplastic substrate for novel printed circuit boards.
In: Radusch, Hans-Joachim (ed.): PPS-21 : Polymer Processing Society, twenty first annual meeting. - Halle-Wittenberg : Martin Luther Univ., 2005

Abu El-Hija, Hussam ; Hugel, Stefan ; Krenkel, Walter:
Development of C/C-SiC Brake Pads for High-Performance Elevators.
In: International Journal of Applied Ceramic Technology. Vol. 2 (2005) Issue 2 . - pp. 105-113.
DOI: https://doi.org/10.1111/j.1744-7402.2005.02012.x

Altstädt, Volker ; Behrendt, Nico ; Frese, Thomas ; Schmidt, Hans-Werner ; Giesa, Reiner ; Hillenbrand, Joachim ; Sessler, Gerhard M.:
Development of cellular films for electret applications.
In: Giacometti, J. A. (ed.): 12th International Symposium on Electrets : Proceedings. - Piscataway, NJ : IEEE, 2005
DOI: https://doi.org/10.1109/ISE.2005.1612317

Krenkel, Walter:
Faserverbundkeramik : Aktueller Stand und Entwicklungstrends.
2005
Event: Werkstoffwissenschaftliches Kolloquium , 8. November 2005 , Saarbrücken.
(Conference item: Lecture series , Speech )

Krenkel, Walter:
Faserverbundkeramik : Aktueller Stand und Entwicklungstrends.
2005
Event: Festveranstaltung zum 20-jährigen Jubiläum des Instituts für Keramik im Maschinenbau, Universität Karlsruhe , 15.-16. September 2005 , Karlsruhe.
(Conference item: Other Event type, Speech )

Krenkel, Walter:
Faserverstärkte Verbundkeramik.
2005
Event: 12. Keramiktag der BAM (Bundesanstalt für Materialforschung und -prüfung) , 12.-13. Mai 2005 , Berlin.
(Conference item: Conference , Speech )

Preußner, Johannes ; Rudnik, Yegor ; Völkl, Rainer ; Glatzel, Uwe:
Finite-element modelling of anisotropic single-crystal superalloy creep deformation based on dislocation densities of individual slip systems.
In: Zeitschrift für Metallkunde. Vol. 96 (2005) Issue 6 . - pp. 595-601.
DOI: https://doi.org/10.3139/146.101076

Perez, P. ; Sandler, Jan K. W. ; Altstädt, Volker ; Hoffmann, T. ; Pospiech, D. ; Ciesielski, Michael ; Döring, M.:
Flame retarded epoxy resin system for liquid composite moulding applications.
In: Radusch, Hans-Joachim (ed.): PPS-21 : Polymer Processing Society, twenty first annual meeting. - Halle-Wittenberg : Martin Luther Univ., 2005

Laukant, Holger ; Wallmann, Clemens ; Korte, Michael ; Glatzel, Uwe:
Flux-less joining technique of aluminium with zinc-coated steel sheets by a dual-spot-laser beam.
In: Advanced Materials Research. Vol. 6-8 (2005) . - pp. 163-170.
DOI: https://doi.org/10.4028/www.scientific.net/AMR.6-8.163

Laukant, Holger ; Wallmann, Clemens ; Müller, Markus ; Glatzel, Uwe ; Korte, Michael ; Stirn, Boris ; Haldenwanger, Hans-Günther:
Fluxless laser beam joining of aluminium with zinc coated steel.
In: Science and Technology of Welding and Joining. Vol. 10 (2005) Issue 2 . - pp. 219-226.
DOI: https://doi.org/10.1179/174329305X37051

Langenfelder, D. ; Sandler, Jan K. W. ; Vasold, M. ; Altstädt, Volker:
Foam Extrusion of Polyetherimide with Chemical Blowing Agents.
In: Cellular metals and polymers : CMaP ; proceedings. - Uetikon-Zürich : Trans Tech Publ., 2005 . - pp. 213-216

Mantey, Axel ; Sandler, Jan K. W. ; Altstädt, Volker ; Kunz, D.:
Foam injection-moulding of polymer components with a significant density reduction.
In: Radusch, Hans-Joachim (ed.): PPS-21 : Polymer Processing Society, twenty first annual meeting. - Halle-Wittenberg : Martin Luther Univ., 2005

Eckardt, C. ; Lehmann, Jürgen ; Rieß, W. ; Krenkel, Walter:
Grünkörpercharakterisierung mittels Indentermethode nach Vickers.
In: Ceramic Forum International. Vol. 82 (2005) Issue 13 . - pp. 302-306.

Krenkel, Walter:
Hochleistungskeramiken für den Leichtbau.
2005
Event: Material Innovativ , 10. März 2005 , Nürnberg.
(Conference item: Conference , Speech )

Krenkel, Walter:
Hochtemperatur-Leichtbau : Neue Strukturkonzepte für die Verkehrs- und Antriebstechnik.
In: Spektrum. (2005) Issue 3 . - pp. 23-25.

Reissig, Lutz ; Glatzel, Uwe:
Influence of Mechanical Deep Drilling on the Near-Surface-Microstructure of Ti6Al4V.
In: Clyne, T. W. ; Simancik, Frantisek (ed.): Metal matrix composites and metallic foams. - Weinheim : Wiley-VCH, 2005 . - pp. 202-207 . - (EUROMAT 99 ; 5 )
DOI: https://doi.org/10.1002/3527606203.ch36

Jozwik, Magdalena ; Kaczmarski, Krzystof ; Freitag, Ruth:
Investigation of the steric mass action formalism in the simulation of breakthrough curves on a monolithic and a packed bed column.
In: Journal of Chromatography A. Vol. 1073 (2005) Issue 1-2 . - pp. 111-121.
DOI: https://doi.org/10.1016/j.chroma.2005.01.059

Behrendt, N. ; Hillenbrandt, J. ; Altstädt, Volker ; Kunz, D.:
Investigations on electret behavior of stretched filed polypropylene films.
In: Radusch, Hans-Joachim (ed.): PPS-21 : Polymer Processing Society, twenty first annual meeting. - Halle-Wittenberg : Martin Luther Univ., 2005

Krenkel, Walter:
Keramik : Von der Kaffeekanne zu Hochleistungsbauteilen von morgen.
2005
Event: Öffentlicher Vortrag des Universitätsvereins Bayreuth , 09.06.2005 , Pegnitz.
(Conference item: Lecture series , Speech )

Kriescher, M. ; Heidenreich, Bernhard ; Göring, J. ; Krenkel, Walter:
Konstruktive Gesichtspunkte bei der Herstellung von Brennkammerschindeln aus faserverstärkter Keramik.
In: Kriegesmann, Jochen (ed.): Keramische Werkstoffe, Kapitel 7.1.6.0. - Köln : Fachverlag Deutscher Wirtschaftsdienst, 2005 . - pp. 1-14

Rosemann, Bernd ; Plumeyer, Martin ; Boch, Hans-Christian ; Nissen, Nils ; Bömmel, Franz:
Life Cycle Management for Complex Medical Products Using the Cumulated Energy Demand in Practice.
In: Innovation by Life Cycle Management. - Tarragona : F. Castells, 2005 . - pp. 571-575

Desponds, Arnaud ; Freitag, Ruth:
Light-responsive bioconjugates as novel tools for specific capture of biologicals by photoaffinity precipitation.
In: Biotechnology and Bioengineering. Vol. 91 (2005) Issue 5 . - pp. 583-591.
DOI: https://doi.org/10.1002/bit.20479

Stantschev, Georg ; Frieß, Martin ; Kochendörfer, Richard ; Krenkel, Walter:
Long Fibre Reinforced Ceramics With Active Fillers and a Modified Intra-matrix Bond Based on the LPI Process.
In: Journal of the European Ceramic Society. Vol. 25 (2005) Issue 2-3 . - pp. 205-209.
DOI: https://doi.org/10.1016/j.jeurceramsoc.2004.08.014

Stantschev, Georg ; Frieß, Martin ; Kochendörfer, Richard ; Krenkel, Walter:
Manufacture and Properties of Long Fiber Reinforced Ceramics Containing Al- and Ti-Fillers Based on the PIP-Process.
In: Singh, Mritunjay ; Kerans, R. ; Lara-Curzio, E., Naslain, R. (Eds.): High temperature ceramic matrix composites 5 : Proceedings of the 5th International Conference on High-Temperature Ceramic Matrix Composites (HT-CMC 5). - Westerville, Ohio : American Ceramic Society, 2005 . - pp. 125-130

Rosemann, Bernd ; Freiberger, Stefan:
Markt der Zukunft : die Konstruktion von Brennstoffzellen sollte bereits jetzt das spätere Produktrecycling berücksichtigen.
In: Müll-Magazin. Vol. 18 (2005) Issue 1 . - pp. 21-24.

Maruschke, Julian ; Rosemann, Bernd:
Measuring Environmental Performance in the Early Phases of Product Design Using Life Cycle Assessment.
In: Fourth International Symposium on Environmentally Conscious Design and Inverse Manufacturing, 2005, Eco Design 2005. - Tokyo : Union of EcoDesigners, 2005 . - pp. 248-249
DOI: https://doi.org/10.1109/ECODIM.2005.1619214

Krenkel, Walter:
Melt-Infiltrated C/SiC Composites for High Performance Braking Systems.
2005
Event: 29th International Conference on Advanced Ceramics and Composites , 23.-28.01.2005 , Cocoa Beach, Florida.
(Conference item: Conference , Speech )

Steinhilper, Rolf ; Rosemann, Bernd:
Nachhaltig Wirtschaften durch recyclingorientierte Produktion : Erwartungen und Empfehlungen.
In: ASK - Access to Sustainable Knowledge.
2005

Rosemann, Bernd:
Nachhaltige Entwicklung und Produktion : Zusammenhänge, Probleme und Handlungsstrategien.
In: Banse, Gerhard ; Kiepas, Andrzej (ed.): Nachhaltige Entwicklung : von der wissenschaftlichen Forschung zur politischen Umsetzung. - Berlin : Ed. Sigma, 2005 . - pp. 193-206

Rosemann, Bernd:
Nachhaltigkeit in Konstruktion und Produktion : Gebot der Vernunft oder tragfähige Handlungsstrategie?
In: RKW-Magazin. Vol. 56 (2005) Issue 1 .

Spörrer, Andreas N. J. ; Sandler, Jan K. W. ; Roth, S. ; Kunz, D. ; Altstädt, Volker:
One-step processing of long fibre-reinforced and highly-filled thermoplastics.
2005
Event: 21st Annual Meeting of the Polymer Processing Society (PPS-21) , 19.-23.06.2005 , Leipzig, Deutschland.
(Conference item: Conference , Speech )

Hüller, Markus ; Wenderoth, Markus ; Vorberg, Stefan ; Fischer, Bernd ; Glatzel, Uwe ; Völkl, Rainer:
Optimization of Composition and Heat Treatment of Age-Hardened Pt-Al-Cr-Ni Alloys.
In: Metallurgical and Materials Transactions A. Vol. 36 (2005) Issue 13 . - pp. 681-689.
DOI: https://doi.org/10.1007/s11661-005-1000-8

Rosemann, Bernd:
Performing Sustainable Development Using Integrated Environmentally Innovative Design Processes.
In: Innovation by Life Cycle Management. - Tarragona : F. Castells, 2005 . - pp. 569-573

Scheibel, Thomas ; Serpell, Louise:
Physical Methods for Studies of Fiber Formation and Structure.
In: Buchner, Johannes ; Kiefhaber, Thomas (ed.): Protein folding handbook. Band 1. - Weinheim : Wiley-VCH, 2005 . - pp. 193-248
DOI: https://doi.org/10.1002/9783527619498.ch39

Sandler, Jan K. W. ; Altstädt, Volker:
Physics of Polymer Foams.
In: Cellular metals and polymers : CMaP ; proceedings. - Uetikon-Zürich : Trans Tech Publ., 2005 . - pp. 195-200

Rosemann, Bernd ; Freiberger, Stefan ; Goering, Jens-Uwe ; Landenberger, Daniel:
Pro/Engineer : Bauteile, Baugruppen, Zeichnungen.
München : Hanser , 2005 . - 184 p.

O'Mahony, Kevin ; Freitag, Ruth ; Hilbrig, Frank ; Müller, Patrick ; Schumacher, Ivo:
Proposal for a better integration of bacterial lysis into the production of plasmid DNA at large scale.
In: Journal of Biotechnology. Vol. 119 (2005) Issue 2 . - pp. 118-132.
DOI: https://doi.org/10.1016/j.jbiotec.2005.03.020

Müller, Markus ; Wallmann, Clemens ; Laukant, Holger ; Glatzel, Uwe:
Prozesstoleranzen des flussmittelfreien Laserstrahlschweißlötens.
In: Schweißen und Schneiden. Vol. 57 (2005) Issue 6 . - pp. 250-255.

Yamahata, Christophe ; Vandevyver, Caroline ; Lacharme, Frederic ; Izewska, Paulina ; Vogel, Horst ; Freitag, Ruth ; Gijs, Martin A. M.:
Pumping of mammalian cells with a nozzle-diffuser micropump.
In: Lab on a Chip. Vol. 5 (2005) Issue 10 . - pp. 1083-1088.
DOI: https://doi.org/10.1039/B504468E

Zbilut, Joseph P. ; Scheibel, Thomas ; Hümmerich, Daniel ; Webber Jr., Charles L. ; Colafranceschi, Mauro ; Giuliani, Alessandro:
Spatial stochastic resonance in protein hydrophobicity.
In: Physics Letters A. Vol. 346 (2005) Issue 1-3 . - pp. 33-41.
DOI: https://doi.org/10.1016/j.physleta.2005.07.072

Suarez, Mougli ; Haenni, Marisa ; Canarelli, Stéphane ; Fisch, Florian ; Chodanowski, Pierre ; Servis, Catherine ; Michielin, Olivier ; Freitag, Ruth ; Moreillon, Philippe ; Mermod, Nicolas:
Structure-Function Characterization and Optimization of a Plant-Derived Antibacterial Peptide.
In: Antimicrobial Agents and Chemotherapy. Vol. 49 (2005) Issue 9 . - pp. 3847-3857.
DOI: https://doi.org/10.1128/AAC.49.9.3847-3857.2005

Szekely, Laszlo ; Freitag, Ruth:
Study of the electroosmotic flow as a means to propel the mobile phase in capillary electrochromatography in view of further miniaturization of capillary electrochromatography systems.
In: Electrophoresis. Vol. 26 (2005) Issue 10 . - pp. 1928-1939.
DOI: https://doi.org/10.1002/elps.200410194

Rosemann, Bernd ; Freiberger, Stefan:
Umweltmanagement: Produktkreisläufe gestalten : Remanufacturing - z.B. Brennstoffzellen.
In: Umwelt-Focus. (2005) Issue 2 .

Rosemann, Bernd:
Uni Bayreuth erleichtert nachhaltiges Wirtschaften.
In: CAD plus : Business + Engineering. (2005) Issue 2 . - pp. 66-67.

Krenkel, Walter ; Hall, Nicole ; Heidenreich, Bernhard ; Seiz, Susanne:
Verfahren zur Herstellung eines Bauteils aus SiC-Keramik sowie danach hergestelltes Halbzeug.
DE 199 47 731.0 (1999)

Krenkel, Walter:
Die verschleißfreie Keramikbremse.
2005
Event: VDI-Hochschulvortragsreihe , 6. April 2005 , Ulm.
(Conference item: Lecture series , Speech )

Rosemann, Bernd:
Zrównowazony rozwój a produkcj Zrównowazony rozwój : Od naukowego badania do politycznej strategi.
In: Banse, Gerhard ; Kiepas, Andrzej (ed.): Zrównoważony rozwój: od naukowego badania do politycznej strategii. - Berlin : Ed. Sigma, 2005 . - pp. 191-204

Faisal, A. Aldo ; Laughlin, Simon B.:
Channel noise in thin axons limits spike time reliability.
2005
Event: Neuroscience 2005, Society for Neuroscience Annual Meeting , 13.11.2005 , Washington, DC, online.
(Conference item: Conference , Paper )

Faisal, A. Aldo ; White, John A. ; Laughlin, Simon B.:
Ion-Channel Noise Places Limits on the Miniaturization of the Brain’s Wiring.
In: Current Biology. Vol. 15 (2005) Issue 12 . - pp. 1143-1149.
DOI: https://doi.org/10.1016/j.cub.2005.05.056

2004

Sandler, Jan K. W. ; Altstädt, Volker:
Influence of the nanoscale morphology on the micro- and macromechanical behavior of composites.
2004
Event: International Conference on Flow Processes in Composite Materials , 07.-09.07.2004 , Newark, Delaware, USA.
(Conference item: Conference , Speech )

Malinova, Vesela ; Freitag, Ruth ; Wandrey, Christine:
Adsorption of charged macromolecules on oppositely charged porous column materials.
In: Journal of Chromatography A. Vol. 1036 (2004) Issue 1 . - pp. 25-32.
DOI: https://doi.org/10.1016/j.chroma.2003.10.087

Scheibel, Thomas:
Amyloid formation of a yeast prion determinant.
In: Journal of Molecular Neuroscience. Vol. 23 (2004) Issue 1-2 . - pp. 13-22.
DOI: https://doi.org/10.1385/JMN:23:1-2:013

Krenkel, Walter:
Carbon Fiber Reinforced CMC for High-Performance Structures.
In: International Journal of Applied Ceramic Technology. Vol. 1 (2004) Issue 2 . - pp. 188-200.
DOI: https://doi.org/10.1111/j.1744-7402.2004.tb00169.x

Krenkel, Walter:
Ceramic Matrix Composites for Advanced Braking Systems.
2004
Event: 5th International Conference on High Temperature Ceramic Matrix Composites (HTCMC 5) , 12.-16. September 2004 , Seattle, USA.
(Conference item: Conference , Speech )

Szucs, Veronika ; Freitag, Ruth:
Comparison of a three-peptide separation by capillary electrochromatography, voltage-assisted liquid chromatography and nano-high-performance liquid chromatography.
In: Journal of Chromatography A. Vol. 1044 (2004) Issue 1-2 . - pp. 201-210.
DOI: https://doi.org/10.1016/j.chroma.2004.05.103

Freitag, Ruth:
Comparison of the chromatographic behavior of monolithic capillary columns in capillary electrochromatography and nano-high-performance liquid chromatography.
In: Journal of Chromatography A. Vol. 1033 (2004) Issue 2 . - pp. 267-273.
DOI: https://doi.org/10.1016/j.chroma.2004.01.053

Rosemann, Bernd ; Meerkamm, Harald:
Eco Design : Make it Happen by an Environmental Innovative Product Design.
In: Marjanović, Dorian (ed.): Design 2004 : proceedings. - Zagreb : Faculty of Mechanical Engineering and Naval Architectur, 2004 . - pp. 1559-1564

Krenkel, Walter:
Einführung in die keramischen Verbundwerkstoffe.
2004
Event: DGM-Fortbildungsseminar Keramische Verbundwerkstoffe , 05.-06. Oktober 2004 , Bayreuth.
(Conference item: Workshop , Speech )

Krenkel, Walter:
Entwicklung innovativer Keramikwerkstoffe für die Luft- und Raumfahrt.
2004
Event: OTTI-Profiforum Funktions- und Strukturkeramik in der industriellen Anwendung , 23. März 2004 , Regensburg.
(Conference item: Other Event type, Speech )

Altstädt, Volker ; Glatzel, Uwe ; Krenkel, Walter:
Fahren und Fliegen mit neuen Werkstoffen : oder lassen sich Leichtbau und hohe Temperaturen koppeln?
In: Spektrum. (2004) Issue 2 . - pp. 18-21.

Kloss, Bärbel ; Wenderoth, Markus ; Glatzel, Uwe ; Völkl, Rainer:
Fast internal oxidation of Ni-Zr-Y alloys at low Oxygen pressure.
In: Oxidation of Metals. Vol. 61 (2004) Issue 3-4 . - pp. 239-251.
DOI: https://doi.org/10.1023/B:OXID.0000025333.36579.b9

Sandler, Jan K. W. ; Werner, P. ; Altstädt, Volker ; Windle, Alan H. ; Shaffer, Milo S. P.:
Fine-Tuning the properties of poly(ether ether ketone)/poly(ether imide) blends by the addition of carbon nanofibres.
In: From nano-scale interactions to engineering structures : ECCM 11, 11th European Conference on Composite Materials. - Rhodos , 2004

Langenfelder, D. ; Sandler, Jan K. W. ; Wahlen, L. ; Altstädt, Volker:
Foam extrusion of polyetherimide with chemical blowing agents.
In: Blowing agents and foaming processes 2004 : the 6th two-day conference dedicated to the critical role of blowing agents in foamed plastics and rubber. - Shawbury : Rapra Technology Limited, 2004

Rosemann, Bernd:
Framework eines umweltorientierten, interdisziplinären Produktinnovationsprozesses unter Einsatz rechnerunterstützter Werkzeuge.
Düsseldorf : VDI-Verlag , 2004 . - XII, 208 p. - (Fortschritt-Berichte VDI : Reihe 1, Konstruktionstechnik, Maschinenelemente ; 373 )
( Doctoral thesis, 2004 , Universität Erlangen; Universität Bayreuth)

Wallmann, Clemens ; Glatzel, Uwe:
Herstellung und Eigenschaften von laserbeschichteten Diamanttrennschleifscheiben (Teil 2).
In: Industrie-Diamanten-Rundschau. Vol. 38 (2004) Issue 4 . - pp. 392-402.

Abu El-Hija, Hussam ; Kriescher, Michael ; Krenkel, Walter:
High Performance C/C-SiC Brake Pads.
In: Lara-Curzio, Edgar ; Readey, Michael J. (ed.): 28th International Conference on Advanced Ceramics and Composites. Teil B. - Westerville, Ohio : American Ceramic Society, 2004 . - pp. 191-196 . - (Ceramic Engineering and Science Proceedings ; 25,4 )
DOI: https://doi.org/10.1002/9780470291191.ch30

Hofenauer, Andreas ; Treusch, Olaf ; Tröger, Fritz ; Gahr, Michaela ; Schmidt, Jens ; Wegener, Gerd ; Fromm, Jörg ; Krenkel, Walter:
High Strength SiSiC Ceramics Derived From Wood Powders.
In: Lara-Curzio, Edgar ; Readey, Michael J. (ed.): 28th International Conference on Advanced Ceramics and Composites. Teil B. - Westerville, Ohio : American Ceramic Society, 2004 . - pp. 603-608 . - (Ceramic Engineering and Science Proceedings ; 25,4 )
DOI: https://doi.org/10.1002/9780470291191.ch91

Krenkel, Walter:
Hochtemperatur-Leichtbau aus Verbundkeramik.
2004
Event: Sitzung des DGM-Arbeitskreis "Mechanisches Werkstoffverhalten bei hoher Temperatur" , 28. September 2004 , Bayreuth.
(Conference item: Conference , Speech )

Krenkel, Walter:
Keramische Verbundwerkstoffe.
2004
Event: Vorlesung an der Technischen Universität Chemnitz, Lehrstuhl für Verbundwerkstoffe , 05.07.2004 , Chemnitz.
(Conference item: Other Event type, Lecture )

Krenkel, Walter ; Renz, Ralph ; Hofmann, Klaus ; Wirtz, Walter ; di Fina, Marcello ; Poetsch, Günther:
Kolbenstangenanordnung.
DE 101 38 322.3 (2001)

Heidenreich, Bernhard ; Frieß, Martin ; Gedon, Heiner ; Krenkel, Walter:
Net Shape Manufacturing of Fabric Reinforced Oxide/Oxide Components via Resin Transfer Moulding and Pyrolysis.
In: Lara-Curzio, Edgar ; Readey, Michael J. (ed.): 28th International Conference on Advanced Ceramics and Composites. Teil B. - Westerville, Ohio : American Ceramic Society, 2004 . - pp. 87-92 . - (Ceramic Engineering and Science Proceedings ; 25,4 )
DOI: https://doi.org/10.1002/9780470291191.ch14

Hümmerich, Daniel ; Helsen, Christopher W. ; Quedzuweit, Susanne ; Oschmann, Jan ; Rudolph, Rainer ; Scheibel, Thomas:
Primary Structure Elements of Spider Dragline Silks and Their Contribution to Protein Solubility.
In: Biochemistry. Vol. 43 (2004) Issue 42 . - pp. 13604-13612.
DOI: https://doi.org/10.1021/bi048983q

Rosemann, Bernd:
Progressive Eco Design by an Environmental Innovative Product Design (EIPD).
In: Engineering design in integrated product development : management of design complexity ; proceedings. - Zielona Góra , 2004

Vorberg, Stefan ; Wenderoth, Markus ; Fischer, Bernd ; Glatzel, Uwe ; Völkl, Rainer:
Pt-Al-Cr-Ni Superalloys: Heat Treatment and Microstructure.
In: JOM : the Journal of the Minerals, Metals & Materials Society. Vol. 56 (2004) Issue 9 . - pp. 40-43.
DOI: https://doi.org/10.1007/s11837-004-0199-y

Freiberger, Stefan ; Rosemann, Bernd:
State of the Art Application and End-of-Life of Fuel Cell Systems.
In: 9th International Congress for Battery Recycling. - Como , 2004

Rosemann, Bernd:
Umweltorientierter Produktinnovationsprozess (UIP).
In: Birkhofer, Herbert ; Müller, D. ; Spath, D. ; Winzer, P. (ed.): Umweltgerechte Produktentwicklung : ein Leitfaden für Entwicklung und Konstruktion. - Berlin : Beuth, 2004

Treusch, Olaf ; Tröger, Fritz ; Wegener, Gerd ; Schmidt, Jens ; Gahr, Michaela ; Fromm, Jörg ; Hofenauer, Andreas ; Krenkel, Walter:
Verfahren zur Herstellung von Keramiken und Bauteil aus einer derartigen Keramik sowie Vorkörper zur Herstellung einer derartigen Keramik.
DE 103 29 822.3 (2003)

Krenkel, Walter:
Vom Polymer zur Keramik.
2004
Event: Ausschuss Normenpraxis im DIN, Tagung am Kompetenzzentrum Neue Materialien , 29. Juni 2004 , Bayreuth.
(Conference item: Conference , Speech )

Krenkel, Walter:
Vom Polymer zur Keramik : innovative Wege zu neuen Hochleistungswerkstoffen.
2004
Event: Kolloquium des SFB 481 , 26. April 2004 , Bayreuth.
(Conference item: Conference , Speech )

Krenkel, Walter:
Vom Polymer zur Verbundkeramik : Neue Wege zu innovativen Hochleistungswerkstoffen.
2004
Event: IMF-Seminar Forschungszentrum Karlsruhe , 3. Dezember 2004 , Karlsruhe.
(Conference item: Workshop , Speech )

Scheibel, Thomas ; Buchner, Johannes:
Review of: Methods in Molecular Biology. Vol. 232: Protein Misfolding and Disease: Principles and Methods. Edited by Peter Bross and Niels Gregerson.
In: ChemBioChem. Vol. 5 (2004) Issue 8 . - pp. 1154-1155.
DOI: https://doi.org/10.1002/cbic.200300144

Scheibel, Thomas:
Spider silks: recombinant synthesis, assembly, spinning, and engineering of synthetic proteins.
In: Microbial Cell Factories. Vol. 3 (2004) . - 14.
DOI: https://doi.org/10.1186/1475-2859-3-14

2003

Hedicke, Katrin ; Altstädt, Volker ; Wittich, Hans:
Thermal and mechanical behavior of polyamide-6 and polyamide-66 nanocomposites.
2003
Event: 7º CONGRESSO BRASILEIRO DE POLÍMEROS , 09.-13-11-2003 , Belo Horizonte, MG, Brasilien.
(Conference item: Conference , Paper )

Krenkel, Walter:
Leichtbaubremsen aus C/C-SiC Verbundkeramik.
2003
Event: Materials Week 2003 : Vortragsveranstaltung zur Hochleistungskeramik , 16.-18.09.2003 , München.
(Conference item: Lecture series , Speech )

Rosemann, Bernd ; Paál, György ; Künkel, Rolf:
Saugschlauch = Suction hose = Tuyau d'aspiration.
EP 1407707 A2 (2003)

Rosemann, Bernd ; Paál, György ; Künkel, Rolf:
Saugschlauch.
DE103 05 869 A1 (2003)

Krenkel, Walter:
Anwendungspotenziale faserverstärkter C/C-SiC Keramiken.
In: Krenkel, Walter (Hrsg.): Keramische Verbundwerkstoffe. - Weinheim : Wiley-VCH, 2003 . - pp. 220-241
DOI: https://doi.org/10.1002/3527607315.ch10

Krenkel, Walter:
Anwendungspotenziale von C/C-SiC Verbundkeramiken.
In: Kriegesmann, Jochen ; Deutsche Keramische Gesellschaft (ed.): Technische Keramische Werkstoffe. Bd. 4.4.1.1. - Köln : Dt. Wirtschaftsdienst, 2003 . - pp. 1-37 . - Losebl.-Ausg.

Krenkel, Walter:
Applications of Fibre Reinforced C/C-SiC Ceramics.
In: Ceramic Forum International. Vol. 80 (2003) Issue 8 . - E31-E38.

Krenkel, Walter:
C/C-SiC Composites for Hot Structures and Advanced Friction Systems.
In: 27th Annual Cocoa Beach Conference on Advanced Ceramics and Composites. - Westerville, Ohio , 2003 . - pp. 583-592 . - (Ceramic Engineering and Science Proceedings ; 24,3/4 )
DOI: https://doi.org/10.1002/9780470294826.ch85

Krenkel, Walter:
Ceramic Matrix Composite Brakes.
In: Vincenzini, P. ; Badini, C. (Hrsg.): Advanced Inorganic Structural Fiber Composites IV : Proceedings of the 4th International Conference "Advanced Inorganic Fiber Composites for Structural Applications", of the Forum on New Materials, part of CIMTEC 2002 - 10th International Ceramics Congress and 3rd Forum on New Materials Florence, Italy, July 14-18, 2002. - Rocca San Casciano, Forlì : Zini Graphis, 2003 . - pp. 299-310 . - (Advances in Science and Technology ; 40 )

Wöllmer, Silke ; Zaefferer, Stefan ; Göken, Mathias ; Mack, Thomas ; Glatzel, Uwe:
Characterization of phases of aluminized nickel base superalloys.
In: Surface and Coatings Technology. Vol. 167 (2003) Issue 1 . - pp. 83-96.
DOI: https://doi.org/10.1016/S0257-8972(02)00843-5

Gehrke, Stephan ; Jérôme, Valérie ; Müller, Rolf:
Chimeric transcriptional control units for improved liver-specific transgene expression.
In: Gene. Vol. 322 (2003) . - pp. 137-143.
DOI: https://doi.org/10.1016/j.gene.2003.08.010

Hoffman, T. ; Pospiech, D. ; Häußler, Liane ; Komber, H. ; Pötschke, P. ; Voigt, D. ; Werner, P. ; Altstädt, Volker:
Compatibilization of high performance polymer blends using block copolymers.
In: Proceedings : Materials Week 2002. - Werkstoff-Informationsges., 2003

Hilbrig, Frank ; Freitag, Ruth:
Continuous annular chromatography.
In: Journal of Chromatography B. Vol. 790 (2003) Issue 1-2 . - pp. 1-15.
DOI: https://doi.org/10.1016/S1570-0232(03)00085-0

Nestler, K. ; Preidel, A. ; Dietrich, D. ; Marx, G. ; Frieß, Martin ; Krenkel, Walter:
CVD-Beschichtung von Fasergeweben und ihre Verarbeitung im Liquid Silicon Infiltration Process (LSI-Verfahren).
In: Degischer, H. P. (Hrsg.): Verbundwerkstoffe. - Weinheim : Wiley-VCH, 2003 . - pp. 405-410
DOI: https://doi.org/10.1002/9783527609017.ch65

Hofenauer, Andreas ; Treusch, Olaf ; Tröger, Fritz ; Wegener, Gerd ; Fromm, Jörg ; Gahr, Michaela ; Schmidt, Jens ; Krenkel, Walter:
Dense Reaction Infiltrated Silicon/Silicon Carbide Ceramics Derived from Wood Based Composites.
In: Advanced Engineering Materials. Vol. 5 (2003) Issue 11 . - pp. 794-799.
DOI: https://doi.org/10.1002/adem.200300400

Reissig, Lutz ; Czubayko, Ulrich ; Wanderka, Nelia ; Völkl, Rainer ; Glatzel, Uwe:
Determination of the local Oxygen distribution in a commercial Titanium alloy by 3-dimensional atom probe.
In: Zeitschrift für Metallkunde. Vol. 94 (2003) Issue 6 . - pp. 771-773.

Heidenreich, Bernhard ; Krenkel, Walter ; Lexow, B.:
Development of CMC-Materials for Lightweight Armor.
In: 27th Annual Cocoa Beach Conference on Advanced Ceramics and Composites : A. - Westerville, Ohio , 2003 . - pp. 375-381 . - (Ceramic Engineering and Science Proceedings ; 24,3/4 )

Frieß, Martin ; Huang, Xianliang ; Krenkel, Walter:
Diamond and Other Hard Materials in Fibre Reinforced Ceramic Matrix Composites.
In: 27th Annual Cocoa Beach Conference on Advanced Ceramics and Composites. - Westerwille, Ohio , 2003 . - pp. 605-611 . - (Ceramic Engineering and Science Proceedings ; 24,3/4 )
DOI: https://doi.org/10.1002/9780470294826.ch88

Costioli, Matteo D. ; Fisch, Igor ; Garret-Flaudy, Frédéric ; Hilbrig, Frank ; Freitag, Ruth:
DNA purification by triple-helix affinity precipitation.
In: Biotechnology and Bioengineering. Vol. 81 (2003) Issue 5 . - pp. 535-545.
DOI: https://doi.org/10.1002/bit.10497

Rosemann, Bernd:
Engineering for Sustainable Development : Design Patterns of Environmental Sound Products.
In: Engineering for sustainable development : an obligatory skill of the future engineer. - Lyngby : Technical Univ. of Denmark, Department of Manufacturing Engineering and Management, 2003 . - p. 39

El Fray, Miroslawa ; Altstädt, Volker:
Fatigue behaviour of novel elastomeric biomaterials for load bearing applications.
2003
Event: European Polymer Congress , 2003 , Stockholm, Schweden.
(Conference item: Conference , Speech )

Kochendörfer, Richard ; Hald, Hermann ; Krenkel, Walter:
Gestaltungsrichtlinien für CMC-Bauteile.
In: Krenkel, Walter (Hrsg.): Keramische Verbundwerkstoffe. - Weinheim : WILEY-VCH, 2003 . - pp. 149-172
DOI: https://doi.org/10.1002/3527607315.ch7

Rosemann, Bernd:
Hidden Patterns of Innovative Environmental Designed Products.
In: Folkeson, A. ; Gralen, K. ; Norell, M. ; Sellgren, U. (ed.): Research for practice - innovation in products, processes and organisations : ICED 03. - Stockholm : Design Society, 2003

Krenkel, Walter:
Hochleistungsbremsen auf SiC-Basis.
2003
Event: 22. Tribologie-Kolloquium des GfT-Arbeitskreises Rhein-Neckar in Zusammenarbeit mit dem Institut für Tribologie der Fachhochschule Mannheim , 27. Mai 2003 , Mannheim.
(Conference item: Other Event type, Speech )

Krenkel, Walter:
Hochtemperatur-Leichtbau : eine Schlüsseltechnologie für die Luft- und Raumfahrt.
2003
Event: Kolloquium Bauweisen- und Konstruktionsforschung des Deutschen Zentrums für Luft- und Raumfahrt , 22. Mai 2003 , Stuttgart.
(Conference item: Other Event type, Speech )

Hoegger, Daniela ; Freitag, Ruth:
Investigation of conditions allowing the synthesis of acrylamide-based monolithic microcolumns for capillary electrochromatography and of factors determining the retention of aromatic compounds on these stationary phases.
In: Electrophoresis. Vol. 24 (2003) Issue 17 . - pp. 2958-2972.
DOI: https://doi.org/10.1002/elps.200305522

Hoegger, Daniela ; Freitag, Ruth:
Investigation of mixed-mode monolithic stationary phases for the analysis of charged amino acids and peptides by capillary electrochromatography.
In: Journal of Chromatography A. Vol. 1004 (2003) Issue 1-2 . - pp. 195-208.
DOI: https://doi.org/10.1016/S0021-9673(03)00563-6

Schmidt, Beata ; Wandrey, Christine ; Freitag, Ruth:
Investigation of particle-based and monolithic columns for cation exchange protein displacement chromatography using poly(diallyl-dimethylammonium chloride) as displacer.
In: Journal of Chromatography A. Vol. 1018 (2003) Issue 2 . - pp. 155-167.
DOI: https://doi.org/10.1016/S0021-9673(03)01326-8

Rosemann, Bernd:
IPP und Produktentwicklung : Triebfeder umweltorientierter Produktinnovation.
In: Ökonomischer Erfolg - ökologische Verträglichkeit - soziale Gerechtigkeit : Umsetzung von Nachhaltigkeit und integrierter Produktpolitik (IPP) in kleinen und mittleren Unternehmen (KMU). - Düsseldorf : VDI-Verl., 2003 . - pp. 13-25 . - (VDI-Berichte ; 1779 )

Krenkel, Walter:
Keramische Faserverbundwerkstoffe für Hochtemperaturanwendungen : werkstoffwissenschafliches.
2003
Event: Kolloquium der Friedrich-Alexander Universität Erlangen-Nürnberg, Institut für Werkstoffwissenschaften , 24. Juni 2003 , Erlangen.
(Conference item: Other Event type, Speech )

Krenkel, Walter:
Keramische Leichtbaubremsen.
In: Krenkel, Walter (Hrsg.): Keramische Verbundwerkstoffe. - Weinheim : WILEY-VCH, 2003 . - pp. 242-267
DOI: https://doi.org/10.1002/3527607315.ch11

Krenkel, Walter:
Keramische Verbundwerkstoffe.
Weinheim : WILEY-VCH , 2003 . - 272 p.

DOI: https://doi.org/10.1002/3527607315

Krenkel, Walter:
Keramische Verbundwerkstoffe.
2003
Event: Blockvorlesung , 12. Juni, 26. Juni, 10. Juli und 17. Juli 2003 , Technischen Universität Chemnitz, Lehrstuhl für Verbundwerkstoffe, Chemnitz.
(Conference item: Other Event type, Lecture )

Krenkel, Walter:
Kosten- und Qualitätssicherungs-Aspekte bei der Herstellung von CMC-Bauteilen.
In: Krenkel, Walter (Hrsg.): Keramische Verbundwerkstoffe. - Weinheim : WILEY-VCH, 2003 . - pp. 173-192
DOI: https://doi.org/10.1002/3527607315.ch8

Stantschev, Georg ; Frieß, Martin ; Krenkel, Walter ; Kochendörfer, Richard:
Langfaserverstärkte keramische Verbundwerkstoffe nach dem LPI-Verfahren mit aktiven Füllstoffen.
In: Degischer, Hans Peter (Hrsg.): Verbundwerkstoffe : 14. Symposium Verbundwerkstoffe und Werkstoffverbunde. - Weinheim , 2003 . - pp. 319-324

Frieß, Martin ; Heidenreich, Bernhard ; Krenkel, Walter:
Langfaserverstärkte oxidkeramische Verbundwerkstoffe nach dem LPI-Verfahren.
In: Degischer, Hans Peter (Hrsg.): Verbundwerkstoffe : 14. Symposium Verbundwerkstoffe und Werkstoffverbunde. - Weinheim , 2003 . - pp. 304-311

Rosemann, Bernd ; Freiberger, Stefan:
Layout Concept of the Pretoria/Rosslyn End-of-Life Vehicle Plant.
Chair of Manufacturing and Remanufacturing Technology
University of Pretoria, Pretoria 2003

Rosemann, Bernd:
Life-Cycle-Engineering unter besonderer Berücksichtigung des Recycling.
In: Perspektiven für das Recycling von Elektro- und Elektronik-Altgeräten. - Düsseldorf : VDI-Verl., 2003 . - p. 93

Krenkel, Walter:
Microstructure Tailoring of C/C-SiC Composites.
In: 27th Annual Cocoa Beach Conference on Advanced Ceramics and Composites. - Westerville, Ohio , 2003 . - pp. 471-476 . - (Ceramic Engineering and Science Proceedings ; 24,3/4 )
DOI: https://doi.org/10.1002/9780470294826.ch68

Kochendörfer, Richard ; Krenkel, Walter:
Möglichkeiten und Grenzen faserverstärkter Keramiken.
In: Krenkel, Walter (Hrsg.): Keramische Verbundwerkstoffe. - Weinheim : WILEY-VCH, 2003 . - pp. 1-22
DOI: https://doi.org/10.1002/3527607315.ch1

Hilbrig, Frank ; Freitag, Ruth:
Protein purification by affinity precipitation.
In: Journal of Chromatography B. Vol. 790 (2003) Issue 1-2 . - pp. 79-90.
DOI: https://doi.org/10.1016/S1570-0232(03)00081-3

Rosemann, Bernd ; Meerkamm, Harald:
Der sanfte Sauger mit IPPsylon-Faktor.
In: UmweltWirtschaftsForum. Vol. 11 (2003) . - pp. 60-63.

Gahr, Michaela ; Schmidt, Jens ; Krenkel, Walter ; Hofenauer, Andreas ; Treusch, Olaf:
SiC-Keramiken auf der Basis von Holzwerkstoffen.
In: Degischer, Hans Peter (Hrsg.): Verbundwerkstoffe : 14. Symposium Verbundwerkstoffe und Werkstoffverbunde. - Weinheim , 2003 . - pp. 383-388

Heidenreich, Bernhard ; Krenkel, Walter ; Krapf, Jürgen ; Kriescher, Michael ; Hussam, Abu El-Hija:
Verfahren zur Herstellung eines Bauteils aus einem Faserverbundwerkstoff und Faserverbundwerkstoff.
DE 103 59 484.1 (2003)

Schmidt, Jens ; Frieß, Martin ; Krenkel, Walter:
Verfahren zur Herstellung eines Verbundwerkstoffes.
DE 101 43 015.1 (2001)

Krenkel, Walter:
Vom Hitzeschutz zur Hochleistungsbremse.
2003
Event: Rahmenprogramm der Deutschen Forschungsgemeinschaft “Der neue Weg ins All – Raumtransporter der nächsten Generation“ , 20. Januar 2003 , Stuttgart.
(Conference item: Other Event type, Speech )

Schmidt, Jens ; Schulte-Fischedick, Jan ; Scheiffele, M. ; Kröner, U. ; Krenkel, Walter ; Tamme, Rainer:
Wärmeübertrager aus Faserkeramikrohren für den Einsatz in der Energietechnik.
In: Degischer, Hans Peter (Hrsg.): Verbundwerkstoffe. - Weinheim : Wiley-VCH, 2003 . - pp. 808-814
DOI: https://doi.org/10.1002/9783527609017.ch133

Rosemann, Bernd:
Zrównoważony rozwój a produkcja : wzajemne zależności, problemy i strategie działania.
In: Problemy Ekologii. Vol. 7 (2003) Issue 6 . - pp. 263-264.

2002

Krenkel, Walter:
Keramische Verbundwerkstoffe für Leichtbaustrukturen.
In: Wielage, Bernhard (Hrsg.): Tagungsband zum 5. Werkstofftechnischen Kolloquium in Chemnitz : 24./25.10.2002. - Chemnitz : TU, Lehrstuhl für Verbundstoffe, 2002 . - pp. 84-91

Krenkel, Walter:
Anisotropes Werkstoffverhalten von Verbundkeramiken und Auswirkungen auf die Bauteilgestaltung.
2002
Event: Jahrestagung der Gesellschaft für angewandte Mathematik und Mechanik (GAMM) , 25.-27. März 2002 , Augsburg.
(Conference item: Conference , Speech )

Treusch, Olaf ; Hofenauer, Andreas ; Tröger, Fritz ; Wegener, Gerd ; Fromm, Jörg ; Gahr, Michaela ; Schmidt, Jens ; Krenkel, Walter:
Biomorphic Silicon Carbide Ceramics from Wood and Wood-Based Materials.
In: Proceedings of the First European Wood Conference. - Hamburg , 2002

Krenkel, Walter:
Brake Disks Made of Ceramic Matrix Composites.
2002
Event: Vorlesung an der Northwestern Polytechnical University State , December 9-13, 2002 , Key Laboratory of Solidification Processing, Xi'an, Shaanxi, China.
(Conference item: Other Event type, Lecture )

Krenkel, Walter ; Heidenreich, Bernhard ; Renz, Ralph:
C/C-SiC Composites for Advanced Friction Systems.
In: Advanced Engineering Materials. Vol. 4 (2002) Issue 7 . - pp. 427-436.
DOI: https://doi.org/10.1002/1527-2648(20020717)4:7<427::AID-ADEM427>3.0.CO;2-C

Schmidt, Klaus ; Frieß, Martin ; Krenkel, Walter:
Carbon Fibre Reinforced Copper Ceramic Composites.
In: Vincenzini, Pietro ; Ascarelli, Paolo (Hrsg.): 10th International Ceramics Congress. Pt. 4. Diamond and other carbon materials III : proceedings of the 3rd International Conference "Diamond and Other Carbon Materials", of the Forum on New Materials, part of CIMTEC 2002 - 10th International Ceramics Congress and 3rd Forum on New Materials, Florence, Italy, July 14 - 18, 2002. - Faenza : Techna, 2002 . - (Advances in Science and Technology ; 39 )

Sandler, Jan K. W. ; Shaffer, Milo S. P. ; Lam, Yeng-Ming ; Windle, Alan H. ; Werner, Philipp ; Altstädt, Volker ; Nastalczyk, Jacek ; Broza, Georg ; Schulte, Karl ; Keun, Christian-André:
Carbon-Nanofibre-filled thermoplastic composites.
In: Bernier, Patrick (ed.): Making functional materials with nanotubes : symposium. - Warrendale, Pa. , 2002 . - (Materials Research Society Symposium Proceedings ; 706 )
DOI: https://doi.org/10.1557/PROC-706-Z4.7.1

Jäger, Horst J. ; Mathias, Klaus ; Hauth, Elke ; Drescher, Robert ; Gissler, Hans M. ; Hennigs, Svenja P. ; Christmann, Andreas:
Cerebral ischemia detected with diffusion-weighted MR imaging after stent implantation in the carotid artery.
In: American Journal of Neuroradiology. Vol. 23 (2002) . - pp. 200-207.

Krenkel, Walter:
CMC Activities at DL.
2002
Event: Vorlesung an der Northwestern Polytechnical University , December 9-13, 2002 , State Key Laboratory of Solidification Processing, Xi'an, Shaanxi, China.
(Conference item: Other Event type, Lecture )

Giovannini, Roberto ; Freitag, Ruth:
Continuous Separation of Multicomponent Protein Mixtures by Annular Displacement Chromatography.
In: Biotechnology Progress. Vol. 18 (2002) Issue 6 . - pp. 1324-1331.
DOI: https://doi.org/10.1021/bp010154y

Gahr, Michaela ; Schmidt, Jens ; Krenkel, Walter:
Dense Biomorphic SiC Ceramics Derived from Wood-Based Composites.
In: Proceedings : papers, keynotes and plenaries of Materials Week 2002, the European Congress on Advanced Materials, their Processes and Applications ; 30 Sept - 1 Oct 2002. - Frankfurt : Werkstoff-Informationsges., 2002 . - CD-ROM

Huang, Xianliang ; Frieß, Martin ; Krenkel, Walter ; Kochendörfer, Richard:
Diamond and Other Hard Materials in Combination with the LSI-Process.
In: Proceedings : papers, keynotes and plenaries of Materials Week 2002, the European Congress on Advanced Materials, their Processes and Applications ; 30 Sept - 1 Oct 2002. - Frankfurt : Werkstoff-Informationsges., 2002 . - CD-ROM

Brehm, Holger ; Glatzel, Uwe:
Dislocation Density Based Model Incorporated in a Finite Element Code in Order to Describe the Creep Behavior of Two Phase Nickel Based Superalloy.
In: Khan, Akhtar S. (ed.): Plasticity, damage and fracture at macro, micro and nano scales : proceedings. - Fulton, Md. : NEAT Press, 2002 . - pp. 236-238

Frieß, Martin ; Renz, Ralph ; Krenkel, Walter:
Graded Ceramic Matrix Composites by LSI-Processing.
In: Vincenzini, Pietro (ed.): 10th International Ceramics Congress : proceedings of the 10th International Ceramics Congress, part of CIMTEC 2002 - 10th International Ceramics Congress and 3rd Forum on New Materials, Florence, Italy July 14 - 18, 2002. - Faenza : Techna, 2002

Canarelli, Stéphane ; Fisch, Igor ; Freitag, Ruth:
Hyphenation of multi-dimensional chromatography and mass spectrometry for the at-line-analysis of the integrity of recombinant protein drugs.
In: Journal of Chromatography B. Vol. 775 (2002) Issue 1 . - pp. 27-35.
DOI: https://doi.org/10.1016/S1570-0232(02)00286-6

Krenkel, Walter ; Schierholt, Johannes:
Implantate als Knochenersatz, insbesondere Gelenkprothesen-Implantate.
DE 100 48 734.3 (2000)

Wöllecke, Frank ; Altstädt, Volker ; Sandler, Jan K. W. ; Rakutt, Dietmar:
The influence of elongational properties of the melt on the morphology of PES and PPE cellular materials.
In: Blowing agents and foaming processes 2002 : the fourth one-day conference dedicated to the critical role of blowing agents in foamed plastics and rubber. - Shawbury : Rapra Technology Limited, 2002

Reissig, Lutz ; Völkl, Rainer ; Glatzel, Uwe:
Influence of Mechanical Deep Drilling on the Near Surface Microstructure of Ti6Al4V.
In: Schnapp, Jürgen Dieter ; Glatzel, Uwe ; Jandt, K. D. ; Knake, Harald (ed.): Thüringer Werkstofftag 2002. - Berlin : Köster, 2002 . - pp. 153-158 . - (Schriftenreihe Werkstoffwissenschaften ; 17 )

Krenkel, Walter:
Keramische Leichtbaubremsen.
2002
Event: DGM-Fortbildungsseminar Keramische Verbundwerkstoffe , 19.-20. November 2002 , Stuttgart.
(Conference item: Conference , Speech )

Krenkel, Walter:
Keramische Verbundwerkstoffe.
2002
Event: Vorlesung "Sondergebiete der Werkstofftechnik" an der Technischen Universität Chemnitz, Lehrstuhl für Verbundwerkstoffe , 6. Juni 2002 , Chemnitz.
(Conference item: Lecture series , Lecture )

Krenkel, Walter:
Kosten- und Qualitätssicherungsaspekte bei der Herstellung von CMC-Bauteilen.
2002
Event: DGM-Fortbildungsseminar Keramische Verbundwerkstoffe , 19.-20. November 2002 , Stuttgart.
(Conference item: Conference , Speech )

Krenkel, Walter:
Leichtbaubremsen aus Faserkeramik.
2002
Event: Fachtagung Hochleistungskeramiken im industriellen Einsatz , 13. Juni 2002 , Dübendorf, Schweiz.
(Conference item: Conference , Speech )

Meerkamm, Harald ; Rosemann, Bernd:
Methodical Framework and Examples of an Environmental Innovative Product Development.
In: Vajna, Sándor ; Design Society (ed.): IPD 2002 : Proceedings. - Magdeburg , 2002

Rosemann, Bernd ; Meerkamm, Harald:
Methodological framework and examples of an environmental innovative product development.
In: Feldmann, Klaus (ed.): Integrated product policy - chance and challenge : proceedings of the 9th CIRP International Seminar on Life Cycle Engineering. - Bamberg : Meisenbach, 2002 . - pp. 135-142

Gorelik, Tatiana ; Kaiser, Ute ; Glatzel, Uwe:
Morphology and Structure of Ge Nanocrystals after Ion-Implantation into SiC.
In: Schnapp, Jürgen Dieter ; Glatzel, Uwe ; Jandt, K. D. ; Knake, Harald (ed.): Thüringer Werkstofftag 2002. - Berlin : Köster, 2002 . - pp. 80-85 . - (Schriftenreihe Werkstoffwissenschaften ; 17 )

Schulte-Fischedick, Jan ; Zern, A. ; Mayer, J. ; Rühle, M. ; Frieß, Martin ; Krenkel, Walter ; Kochendörfer, Richard:
The Morphology of Silicon Carbide in C/C-SiC Composites.
In: Materials Science and Engineering: A. Vol. 332 (2002) Issue 1-2 . - pp. 146-152.
DOI: https://doi.org/10.1016/S0921-5093(01)01719-1

Schubert, Christian ; Kaiser, Ute ; Hedler, A. ; Wesch, Werner ; Gorelik, Tatiana ; Glatzel, Uwe ; Kräußlich, J. ; Wunderlich, B. ; Hess, G. ; Goetz, K.:
Nanocrystal formation in SiC by Ge ion implantation and subsequent thermal annealing.
In: Journal of Applied Physics. Vol. 91 (2002) Issue 3 . - pp. 1520-1524.
DOI: https://doi.org/10.1063/1.1430539

Lengsfeld, H. ; Altstädt, Volker ; Sprenger, S. ; Döring, M. ; Kollann, C. ; Dittrich, U.:
Novel organophosphorus curing agents for advanced composite applications.
In: Goldberg, Allan B. ; Maher, Michael C. (ed.): 2002 M & P - ideas to reality : 34th international SAMPE technical conference. - Covina, Calif. : SAMPE International Business Office, 2002 . - pp. 705-714

Zaefferer, Stefan ; Glatzel, Uwe:
Orientation Relationship of Phases in an Oxidation Protection Coating on a Ni-Based Superalloy Single Crystal.
In: Materials Science Forum. Vol. 408-412 (2002) . - pp. 1531-1536.
DOI: https://doi.org/10.4028/www.scientific.net/MSF.408-412.1531

Krenkel, Walter ; Henke, Thilo:
Reibeinheit zum reibenden Eingriff mit einem Gegenkörper sowie Verfahren zur Herstellung einer solchen Reibeinheit.
DE19721473 A1 (1997)

Wöllecke, Frank ; Altstädt, Volker:
The role of extensional rheology in the development of new closed cell foams.
In: Münstedt, H. (ed.): Eurheo 2002 : proceedings. - Erlangen : LSP, Institute of Polymer Materials, 2002

Rosemann, Bernd ; Meerkamm, Harald:
Der sanfte Sauger mit IPPsylon-Faktor.
In: Müll-Magazin. Vol. 15 (2002) .

Krenkel, Walter:
Space and Terrestrial Applications of LSI-Derived CMC Material.
2002
Event: Vorlesung an der Northwestern Polytechnical University , December 9-13, 2002 , State Key Laboratory of Solidification Processing, Xi'an, Shaanxi, China.
(Conference item: Other Event type, Lecture )

Schubert, Christian ; Wesch, Werner ; Kaiser, Ute ; Hedler, A. ; Gärtner, K. ; Gorelik, Tatiana ; Glatzel, Uwe:
Synthesis of group IV nanocrystals in SiC by ion beam processing.
In: Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms. Vol. 191 (2002) Issue 1-4 . - pp. 428-432.
DOI: https://doi.org/10.1016/S0168-583X(02)00586-4

Krenkel, Walter ; Renz, Ralph:
Teleskop.
DE 199 62 831.9 (1999)

Thüringer Werkstofftag 2002.
ed.: Schnapp, Jürgen Dieter ; Glatzel, Uwe ; Jandt, Klaus D. ; Knake, Harald
Berlin : Köster , 2002

Gorelik, Tatiana ; Kaiser, Ute ; Schubert, Christian ; Wesch, Werner ; Glatzel, Uwe:
Transmission electron microscopy study of Ge implanted into SiC.
In: Journal of Materials Research. Vol. 17 (2002) Issue 2 . - pp. 479-486.
DOI: https://doi.org/10.1557/JMR.2002.0067

Rosemann, Bernd ; Künkel, Rolf ; Wolf, Marion:
Umweltmanagement : Markterfolg durch Innovation - Produktgestaltung.
In: Umwelt-Focus. (2002) . - pp. 33-35.

Krenkel, Walter:
Vom Thermalschutz zur Hochleistungsbremse : Erfolgreicher Technologietransfer am Beispiel der keramischen Verbundwerkstoffe.
2002
Event: Werkstofftag der Internationalen Luftfahrtausstellung (ILA) , 07.-08. Mai 2002 , Berlin.
(Conference item: Conference , Speech )

Faisal, A. Aldo ; Laughlin, Simon B.:
Channel noise limits the minimum diameter of axons.
In: The Journal of Physiology. Vol. 543 (2002) Issue Suppl. . - p. 21.

Faisal, A. Aldo ; Laughlin, Simon B. ; White, J. A.:
Effects of ion channel stochasticity on action potential propagation in axon collaterals.
2002
Event: 4th Forum of European Neuroscience (FENS) , 13.-17.07.2002 , Paris.
(Conference item: Conference , Paper )

Faisal, A. Aldo ; Laughlin, Simon B. ; White, J. A.:
How reliable is the connectivity in cortical neural networks?
In: Proceedings of the 2002 International Joint Conference on Neural Networks (IJCNN'02). Volume 2. - Piscataway, NJ : IEEE, 2002 . - pp. 1661-1666
DOI: https://doi.org/10.1109/IJCNN.2002.1007767

2001

Chudej, Kurt:
Anwendungen zustandsbeschränkter optimaler Steuerungsaufgaben.
2001
Event: Kolloquium, Fachbereich Mathematik, Universität Hamburg , 20.12.2001 , Hamburg.
(Conference item: Lecture series , Speech )

Krenkel, Walter:
Anwendungspotenziale faserverstärkter Keramiken.
2001
Event: Jahrestagung der Deutschen Keramischen Gesellschaft , 9. Oktober 2001 , Bayreuth.
(Conference item: Conference , Speech )

Rosemann, Bernd ; Meerkamm, Harald:
BEnefiT - Bayerisches Entwicklungsnetz für innovative Technologien : mit „High“- und „Clean-„ Technology zu marktfähigen Produkten: Wir stellen uns vor.
In: Technik in Bayern. (2001) . - pp. 26-27.

Rosemann, Bernd:
BEnefiT : Integrierte, interdisziplinäre Produktentwicklung komplexer Produkte.
In: Wege zu einem produktbezogenen Umweltschutz : integrierte Produktpolitik und integriertes Produktmanagement. - Neuherberg : GSF-Forschungszentrum, 2001 . - pp. 47-56 . - (Seminarband der Zentralen Informationsstelle Umweltberatung Bayern ; 18 )

Rosemann, Bernd ; Meerkamm, Harald:
BEnefiT : Know-how-Pool ist die Basis für zukünftige Produktinnovationen ; Hintergründe und Erfahrungen zur Entwicklung eines führenden IPP-Netzwerkes.
In: Bayerisches Staatsministerium für Landesentwicklung und Umweltfragen (ed.): Dokumentation IPPsilon-Kongress. - München , 2001 . - (IPP Integrierte Produktpolitik )

Scheibel, Thomas ; Kowal, Anthony S. ; Bloom, Jesse ; Lindquist, Susan L.:
Bidirectional amyloid fiber growth for a yeast prion determinant.
In: Current Biology. Vol. 11 (2001) Issue 5 . - pp. 366-369.
DOI: https://doi.org/10.1016/S0960-9822(01)00099-9

Krenkel, Walter:
Biomorphe SiC-Keramiken aus Hölzern : Herstellung, Eigenschaften und Anwendungspotenziale.
2001
Event: Symposium "Holz Innovativ" , 07.-08. März 2001 , Rosenheim.
(Conference item: Conference , Speech )

Renz, Ralph ; Heidenreich, Bernhard ; Schöppach, Achim ; Richter, F. ; Krenkel, Walter:
CMC Materials for Lightweight and Low CTE Applications.
In: Krenkel, Walter (ed.): High Temperature Ceramic Matrix Composites. - Weinheim : WILEY-VCH, 2001 . - pp. 839-845

Abu El-Hija, Hussam ; Krenkel, Walter:
Cost Analysis for the Manufacture of C/C-SiC Structural Parts.
In: Krenkel, Walter (ed.): High Temperature Ceramic Matrix Composites. - Weinheim : WILEY-VCH, 2001 . - pp. 846-851

Völkl, Rainer ; Glatzel, Uwe ; Brömel, T. ; Freund, D. ; Fischer, Bernd ; Lupton, David:
Creep of Platinum Alloys at Extremely High Temperatures.
In: Parker, J. D. (ed.): Creep and fracture of engineering materials and structures : proceedings. - London : Institute of Materials, 2001 . - pp. 21-27

Frieß, Martin ; Krenkel, Walter ; Nestler, K. ; Marx, G.:
CVD-Coating of Fabric Sheets in Combination with the LSI-Process.
In: Krenkel, Walter (ed.): High Temperature Ceramic Matrix Composites. - Weinheim : WILEY-VCH, 2001 . - pp. 199-204

Schmidt, Jens ; Scheiffele, M. ; Krenkel, Walter:
Engineering of CMC Tubular Components.
In: Krenkel, Walter (ed.): High Temperature Ceramic Matrix Composites. - Weinheim : WILEY-VCH, 2001 . - pp. 826-831

Rosemann, Bernd ; Meerkamm, Harald:
Erlanger Netzwerk BEnefiT weist den Weg einer umweltinnovativen Produktentwicklung.
In: Bayerisches Staatsministerium für Landesentwicklung und Umweltfragen (ed.): Dokumentation IPPsilon-Kongress. - München , 2001 . - (IPP Integrierte Produktpolitik )

Krenkel, Walter:
Faserkeramiken : Eigenschaften, Herstellung und Produkte.
2001
Event: Arbeitskreistreffen des Informativen Arbeitskreises Keramikbearbeitung (IAK) am Institut für Werkzeugmaschinen und Fabrikbetrieb (IWF) , 12.03.2001 , Berlin.
(Conference item: Conference , Speech )

Krenkel, Walter:
Fasern erzeugen bei Keramik ein quasiduktiles Bruchverhalten.
In: Maschinenmarkt. (2001) Issue 5 . - pp. 34-36.

Rosemann, Bernd ; Meerkamm, Harald:
Forschungshighlight des Monats : Prototyp des umweltfreundlichen Staubsaugers.
Universität Erlangen
Erlangen 2001

Schmidt, Jens ; Frieß, Martin ; Krenkel, Walter:
Herstellung eines Verbundwerkstoffes durch Schmelzphaseninfiltration von binären Kupfer-Titan-Legierungen in kohlenstofffaserverstärkten Kohlenstoffstrukturen (C/C).
In: Wielage, Bernhard ; Leonhardt, G. (ed.): Verbundwerkstoffe und Werkstoffverbunde. - Weinheim : WILEY-VCH, 2001 . - pp. 322-327

Frieß, Martin ; Brandt, Rüdiger ; Neuer, Günther ; Krenkel, Walter:
Influence of Process Parameters on the Thermophysical Properties of C/C-SiC.
In: Krenkel, Walter (ed.): High Temperature Ceramic Matrix Composites. - Weinheim : WILEY-VCH, 2001 . - pp. 328-333

Wöllmer, Silke ; Mack, Thomas ; Glatzel, Uwe:
Influence of tungsten and rhenium concentration on creep properties of a second generation superalloy.
In: Materials Science and Engineering: A. Vol. 319-321 (2001) . - pp. 792-795.
DOI: https://doi.org/10.1016/S0921-5093(01)01063-2

Krenkel, Walter ; Benitsch, Bodo ; Renz, Ralph:
Kalibrierkörper und Verwendung desselben.
DE 100 03 176.5 (2000)

Krenkel, Walter:
Keramik mit Faserverstärkung für hochbelastbare Leichtbauteile.
In: Maschinenmarkt. (2001) Issue 14 . - pp. 56-58.

Krenkel, Walter:
Keramische Leichtbauwerkstoffe.
2001
Event: Conference "Materials Experience" , 15.-16. November 2001 , Frankfurt.
(Conference item: Conference , Speech )

Rosemann, Bernd ; Meerkamm, Harald:
Ökologische Produktoptimierungen : Das Projekt BEnefiT.
In: Future e.V. (ed.): Integrierte Produktpolitik : Konzepte + Strategien. - München , 2001 . - p. 9

Krenkel, Walter:
Kosten- und Qualitätssicherungs-Aspekte bei der Herstellung von Bauteilen aus keramischen Verbundwerkstoffen.
In: Kriegesmann, Jochen ; Deutsche Keramische Gesellschaft (ed.): Technische Keramische Werkstoffe. Bd. 10.2.1.0. - Köln : Dt. Wirtschaftsdienst, 2001 . - pp. 1-35 . - Losebl.-Ausg.

Krenkel, Walter:
Kosten- und Qualitätssicherungsaspekte bei der Herstellung von CMC-Bauteilen.
2001
Event: DGM-Fortbildungsseminar Keramische Verbundwerkstoffe , 20.-21. November 2001 , Stuttgart.
(Conference item: Conference , Lecture )

Krenkel, Walter:
Leichtbaubremsen aus C/C-SiC Keramiken.
2001
Event: DGM-Fortbildungsseminar Keramische Verbundwerkstoffe , 20.-21. November 2001 , Stuttgart.
(Conference item: Conference , Speech )

Renz, Ralph ; Heidenreich, Bernhard ; Krenkel, Walter:
Lightweight and Wear Resistant CMC Brakes.
In: Ceramic Materials and Components for Engines. - Weinheim : WILEY-VCH, 2001 . - pp. 63-67

Frieß, Martin ; Krenkel, Walter:
Long Fiber Reinforced Damage-Tolerant Oxide/Oxide CMCs with Polysiloxanes.
In: Krenkel, Walter (ed.): High Temperature Ceramic Matrix Composites. - Weinheim : Wiley-VCH, 2001 . - pp. 616-621

Jumel, J. ; Lepoutre, F. ; Frieß, Martin ; Neuer, Günther ; Krenkel, Walter:
Microscopic Thermal Characterization of C/C-SiC Composites.
In: Krenkel, Walter (ed.): High Temperature Ceramic Matrix Composites. - Weinheim : WILEY-VCH, 2001 . - pp. 120-126

Schmidt, Jens ; Seiz, Susanne ; Krenkel, Walter:
Microstructure and Properties of Biomorphic SiSiC Ceramics Derived From Pyrolysed Wooden Templates.
In: Krenkel, Walter (ed.): High Temperature Ceramic Matrix Composites. - Weinheim : WILEY-VCH, 2001 . - pp. 414-419

Glatzel, Uwe ; Mack, Thomas ; Wortmann, Jürgen ; Wöllmer, Silke:
Nickel Based Alloy for Casting Single Crystal Components.
EP1223229A1 (2001)

Glatzel, Uwe ; Mack, Thomas ; Wortmann, Jürgen ; Wöllmer, Silke:
Nickel-Based Alloy for Producing Components Solidified in Single Crystal Form.
US20020182100A1 (2001)

Glatzel, Uwe ; Mack, Thomas ; Wortmann, Jürgen ; Wöllmer, Silke:
Nickel-Based Alloy for Producing Structural Member Solidified as Single Crystal by Casting Method.
JP2002302724 (2001)

Glatzel, Uwe ; Mack, Thomas ; Wortmann, Jürgen ; Wöllmer, Silke:
Nickel-Based Alloy for Producing, by Casting, Components Which Have Solidified in Single Crystal Form.
CA2366997 (2001)

Glatzel, Uwe ; Mack, Thomas ; Wortmann, Jürgen ; Wöllmer, Silke:
Nickel-Basislegierung für die gießtechnische Herstellung einkristallin erstarrter Bauteile.
DE10100790C2 (2001)

Krenkel, Walter ; Henke, Thilo ; Kochendörfer, Richard:
Reibeinheit in Massivbauweise, insbesondere Bremsscheibe, mit mehreren Reibkörpern.
Deutsches Patent 197 21 647, 2002, Europäische Patentschrift 0 983 452, 2001 (2001)

Scheibel, Thomas ; Lindquist, Susan L.:
The role of conformational flexibility in prion propagation and maintenance for Sup35p.
In: Nature Structural Biology. Vol. 8 (2001) Issue 11 . - pp. 958-962.
DOI: https://doi.org/10.1038/nsb1101-958

Heidenreich, Bernhard ; Renz, Ralph ; Krenkel, Walter:
Short Fibre Reinforced CMC Materials for High Performance Brakes.
In: Krenkel, Walter (ed.): High Temperature Ceramic Matrix Composites. - Weinheim : WILEY-VCH, 2001 . - pp. 809-815

Jérôme, Valérie ; Müller, Rolf:
A synthetic leucine zipper-based dimerization system for combining multiple promoter specificities.
In: Gene Therapy. Vol. 8 (2001) Issue 9 . - pp. 725-729.
DOI: https://doi.org/10.1038/sj.gt.3301443

Nettelbeck, Dirk M. ; Miller, Daniel W. ; Jérôme, Valérie ; Zuzarte, Marylou ; Watkins, Sarah J. ; Hawkins, Robert E. ; Müller, Rolf ; Kontermann, Roland E.:
Targeting of Adenovirus to Endothelial Cells by a Bispecific Single-Chain Diabody Directed against the Adenovirus Fiber Knob Domain and Human Endoglin (CD105).
In: Molecular Therapy. Vol. 3 (2001) Issue 6 . - pp. 882-891.
DOI: https://doi.org/10.1006/mthe.2001.0342

Siebörger, Dieter ; Brehm, Holger ; Wunderlich, F. ; Möller, D. ; Glatzel, Uwe:
Temperature dependence of lattice parameter, misfit and thermal expansion coefficient of matrix, ɣ' phase and superalloy.
In: Zeitschrift für Metallkunde. Vol. 92 (2001) . - pp. 58-61.

Siebörger, Dieter ; Knake, Harald ; Glatzel, Uwe:
Temperature dependence of the elastic moduli of the nickel-base superalloy CMSX-4 and its isolated phases.
In: Materials Science and Engineering: A. Vol. 298 (2001) Issue 1-2 . - pp. 26-33.
DOI: https://doi.org/10.1016/S0921-5093(00)01318-6

Rosemann, Bernd ; Meerkamm, Harald:
Towards Closed-Substance-Cycles : Computer integrated Recycling integrated Recycling from Design to End-of-Life.
In: Culley, Steve (ed.): 13th International Conference on Engineering Design - ICED 01. Band 3: Design methods for performance and sustainability. - Bury St. Edmunds [u.a.] : Professional Engineering Publ., 2001 . - (Serie WDK, Workshop Design - Konstruktion ; 28 )

Schöppach, Achim ; Petasch, Thomas ; Heidenreich, Bernhard ; Renz, Ralph ; Krenkel, Walter:
Use of Ceramic Matrix Composites in High Precision Laser Communication Optics.
In: European Conference on Spacecraft Structures, Materials and Mechanical Testing <7, 2000, Noordwijk>. - Noordwijk : ESA Publ. Div., 2001 . - pp. 141-147

Garret-Flaudy, Frédéric ; Freitag, Ruth:
Use of the avidin (imino)biotin system as a general approach to affinity precipitation.
In: Biotechnology and Bioengineering. Vol. 71 (2001) Issue 3 . - pp. 223-234.
DOI: https://doi.org/10.1002/1097-0290(2000)71:3<223::AID-BIT1012>3.0.CO;2-U

Rosemann, Bernd:
Virtualisierung in der Produktentwicklung : eine Chance für eine umwelt- und marktorientierte Produktinnovation?
In: Meerkamm, Harald (ed.): Design for X. - Erlangen : Lehrstuhl für Konstruktionstechnik, Univ. Erlangen-Nürnberg, 2001 . - pp. 29-36

Krenkel, Walter ; Nedele, Martin:
Wärmetauscher aus Faserkeramik.
Deutsches Patent 197 30 389, 2002, Europäische Patentschrift EP 0 996 848, 2001 (2001)

Faisal, A. Aldo ; Matheson, Tom:
Coordinated righting behaviour in locusts.
In: Journal of Experimental Biology. Vol. 204 (2001) Issue 4 . - pp. 637-648.
DOI: https://doi.org/10.1242/jeb.204.4.637

2000

Sandler, Jan K. W. ; Lenz, T. ; Wöllecke, Frank ; Altstädt, Volker ; Rakutt, D.:
Correlation of melt elongational properties with foam cell morphology.
In: Binding, D. M. (ed.): Proceedings of the XIIIth International Congress on Rheology. - Glasgow : British Society of Rheology, 2000

Krenkel, Walter:
Hochleistungsbremsen aus C/C-SiC.
2000
Event: Arbeitskreis Verstärkung keramischer Werkstoffe im DKG/DGM GA Hochleistungskeramik , 10. März 2000 , Bremen.
(Conference item: Conference , Speech )

Hirsch, Kurt ; Krenkel, Walter ; Altmann, Ingo ; Kochendörfer, Richard ; Lützenburger, Nicole ; Roth, Bernhard ; Schinköth, Detlef:
Bauteil, das eine Schutzschicht gegen Erosion durch thermische Belastung aufweist und Verfahren zur Herstellung einer Schutzschicht auf einem Bauteil.
DE 100 48 764.5 (2000)

Renz, Ralph ; Krenkel, Walter:
C/C-SiC Composites for High Performance Emergency Brake Systems.
In: Composites : from fundamentals to exploitation : book of abstracts. - London : IOM Communications, 2000 . - (Conference and Events / IOM Communications Ltd. : C ; 11 )

Renz, Ralph ; Krenkel, Walter:
CMC Brake Disks : Design, Manufacture and Quality Assurance Aspects.
In: Materials Week : International Congress on Advanced Materials, their Processes and Applications. - München : Materials Week, 2000 . - CD-ROM

Krenkel, Walter:
CMC Materials for Aerospace Applications.
2000
Event: 11th Annual Advanced Aerospace Materials and Processes Conference and Exposition (AeroMat 2000) , 26.-29. Juni 2000 , Seattle, USA.
(Conference item: Conference , Speech )

Glock, Karin ; Knobloch, Carola ; Glatzel, Uwe:
Creep properties of Ni₃(AlTiTa) γ′ phase single crystals.
In: Metallurgical and Materials Transactions A. Vol. 31 (2000) Issue 7 . - pp. 1733-1740.
DOI: https://doi.org/10.1007/s11661-998-0330-8

Rosemann, Bernd ; Schauffler, Christian ; Meerkamm, Harald:
Design for Tribology and Design for Environment : Two Goals, One Way.
In: Ciantar, Christoopher ; Hadfield, Mark (ed.): 1st International Conference on Tribology in Environmental Design 2000 : the characteristics of interacting surfaces ; a key factor in sustainable and economic products. - Bury St. Edmunds [u.a.] : Professional Engineering Publ., 2000

Heidenreich, Bernhard ; Krenkel, Walter:
Development of C/C-SiC Materials for Friction Applications.
In: Ceramics : Processing, Reliability, Tribology and Wear. - Weinheim : Wiley-VCH, 2000 . - pp. 455-460 . - (EUROMAT 99 ; 12 )
DOI: https://doi.org/10.1002/3527607293.ch72

Heidenreich, Bernhard ; Krenkel, Walter:
Development of CMC for Friction Applications.
In: Advanced Ceramics and Composites : Neue keramische Werkstoffe und Verbundwerkstoffe. - Renningen-Malmsheim : expert-Verlag, 2000 . - p. 257

Krenkel, Walter:
Entwicklung eines kostengünstigen Verfahrens zur Herstellung von Bauteilen aus keramischen Verbundwerkstoffen.
Köln : Deutsches Zentrum für Luft- und Raumfahrt e.V , 2000 . - 214 S. - (Forschungsbericht / Deutsches Zentrum für Luft- und Raumfahrt ; 200,4 )
( Doctoral thesis, 2000, Universität Stuttgart)

Heidenreich, Bernhard ; Krenkel, Walter:
Entwicklung von C/C-SiC Faserkeramiken für Friktionsanwendungen.
In: Fortschrittsberichte der Deutschen Keramischen Gesellschaft. Vol. 15 (2000) Issue 1 . - pp. 197-208.

Rosemann, Bernd ; Jacobson, Mette Mo:
Environmental Product Development : a Case-Project using a Systematic Approach in Design Education.
In: Kolloquium zur Kreislaufwirtschaft und Demontage. - Berlin : Techn. Univ., Inst. für Werkzeugmaschinen und Fabrikbetrieb, 2000

Krenkel, Walter:
Extreme Lightweight Construction with Ceramic Matrix Composites.
2000
Event: Kyushu National Industrial Research Institute , 29. März 2000 , Tosu, Japan.
(Conference item: Conference , Speech )

Krenkel, Walter:
Faserverstärkte Keramiken für Bremsenanwendungen.
In: Materialwissenschaft und Werkstofftechnik. Vol. 31 (2000) Issue 8 . - pp. 655-660.
DOI: https://doi.org/10.1002/1521-4052(200008)31:8<655::AID-MAWE655>3.0.CO;2-4

Krenkel, Walter:
From Polymers to Ceramics : Low Cost Manufacturing of CMC Materials.
In: Molecular Crystals and Liquid Crystals Science and Technology. Section A. Molecular Crystals and Liquid Crystals. Vol. 354 (2000) Issue 1 . - pp. 353-364.
DOI: https://doi.org/10.1080/10587250008023627

Nettelbeck, Dirk M. ; Jérôme, Valérie ; Müller, Rolf:
Gene therapy : designer promoters for tumour targeting.
In: Trends in Genetics. Vol. 16 (2000) Issue 4 . - pp. 174-181.
DOI: https://doi.org/10.1016/S0168-9525(99)01950-2

Krenkel, Walter:
High Performance Ceramics for Structural Applications.
In: Proceedings / Third International Conference on Composite Science and Technology : 11 - 13 January 2000, Durban, South Africa. - Durban , 2000 . - p. 79

Krenkel, Walter:
Hochleistungsbremsen aus Faserkeramik.
2000
Event: Workshop tribologische Eigenschaften keramischer Komponenten , 23. November 2000 , Karlsruhe.
(Conference item: Workshop , Speech )

Lützenburger, Nicole ; Krenkel, Walter:
The Influence of Fibre and Geometry on the Mechanical Characteristics of C/C-SiC Composites.
In: Composites : from fundamentals to exploitation : book of abstracts. - London : IOM Communications, 2000 . - (Conference and Events / IOM Communications Ltd. : C ; 11 )

Meerkamm, Harald ; Rosemann, Bernd:
Integrated Product Policy and BEnefiT : Das Bayerische Entwicklungsnetz für innovative Technologien.
In: BayFORREST (ed.): Integrierte Produktpolitik : Von der Entwicklung bis zur Entsorgung. - Nürnberg , 2000 . - p. 31

Rosemann, Bernd ; Meerkamm, Harald ; Steinmetzer, H.-C.:
Integrated Product Policy in Bavaria and the Bavarian Network for the Development of Innovative Technologies (BEnefiT).
In: Reichl, Herbert ; Griese, Hansjörg (ed.): Joint International Congress and Exhibition Electronics Goes Green 2000+ : a challenge for the next millennium. Band 1: Technical lectures. - Berlin : VDE-Verl., 2000

Rosemann, Bernd ; Meerkamm, Harald:
Ökonomisch-ökologische Produktoptimierung durch recyclinggerechte Konstruktion.
In: Industrie-Management. Vol. 16 (2000) . - pp. 14-18.

Krenkel, Walter:
Kosten- und Qualitätssicherungsaspekte für die Herstellung von CMC-Bauteilen.
2000
Event: DGM-Fortbildungsseminar Keramische Verbundwerkstoffe , 07.-08. November 2000 , Stuttgart.
(Conference item: Conference , Speech )

Rosemann, Bernd:
Lebenszyklusorientierte, ökonomisch-ökologische Produktoptimierung durch recyclinggerechte Konstruktion.
In: Kolloquium zur Kreislaufwirtschaft und Demontage. - Berlin : Techn. Univ., Inst. für Werkzeugmaschinen und Fabrikbetrieb, 2000

Krenkel, Walter:
Leichtbaubremsen aus C/C-SiC Keramiken.
2000
Event: DGM-Fortbildungsseminar Keramische Verbundwerkstoffe , 07.-08. November 2000 , Stuttgart.
(Conference item: Conference , Speech )

Heidenreich, Bernhard ; Renz, Ralph ; Krenkel, Walter:
Leichtbaubremsen aus Faserkeramik.
In: Kriegesmann, Jochen ; Deutsche Keramische Gesellschaft (ed.): Technische Keramische Werkstoffe. Bd. 8.3.1.1. - Köln : Dt. Wirtschaftsdienst, 2000 . - pp. 1-29 . - Losebl.-Ausg.

Schmidt, Jens ; Hall, Nicole ; Seiz, Susanne ; Krenkel, Walter:
Low Cost SiC Ceramics From Wooden Products.
In: Proceedings. CD 1: Materials Week 2000. - Frankfurt : Werkstoff-Informationsges., 2000 . - 1 CD-ROM

Rosemann, Bernd ; Meerkamm, Harald ; Trautner, Stefan ; Feldmann, Klaus:
Methodische und instrumentelle Unterstützung zur Optimierung der Kreislaufführung technischer Produkte.
In: Recyclingorientierte Entwicklung technischer Produkte 2000 : Management komplexer Zielkonflikte. - Düsseldorf : VDI-Verl., 2000 . - pp. 27-42 . - (VDI-Berichte ; 1570 )

Henke, T. ; Krenkel, Walter:
Modular Design of CMC Structures by Reaction Bonding of SiC.
In: Joining of Advanced and Specialty Materials II : proceedings from Materials Solutions Conference '99 on Joining of Advanced and Specialty Materials, 1-4 November 1999, Cincinnati, Ohio. - Materials Park, Ohio : ASM International, 2000 . - pp. 3-9

Rosemann, Bernd ; Meerkamm, Harald:
Nachhaltige Produktentwicklung : Einsatz rechnerunterstützter Methoden von der Planung an.
In: Kongress und Fachausstellung "Umwelt Innovativ". - Augsburg , 2000

Krenkel, Walter:
Neue Materialien für Hochgeschwindigkeitsflugkörper.
2000
Event: Wehrtechnisches Symposium "Wirkung und Schutz, Explosivstoffe" , 13.-17. November 2000 , Mannheim.
(Conference item: Conference , Speech )

Krenkel, Walter ; Kochendörfer, Richard:
Reibeinheit.
DE4438456 C2 (1994)

Krenkel, Walter ; Renz, Ralph:
Sicherheitseinrichtung für einen Aufzug.
DE 100 45 881.5 (2000)

Frieß, Martin ; Krenkel, Walter:
Silicon Based Preceramic Polymers in Combination With the LSI-Process.
In: Materials Week : International Congress on Advanced Materials, their Processes and Applications. - München : Materials Week, 2000 . - 1 CD-ROM

Renz, Ralph ; Henke, T. ; Krenkel, Walter:
Ultralight and Wear Resistant Ceramic Brakes.
In: Materials for Transportation Technology. - Weinheim, Germany : WILEY-VCH, 2000 . - p. 89

Krenkel, Walter ; Henke, Thilo:
Verfahren zur Erzeugung einer Siliziumcarbid enthaltenden Schutzschicht.
DE 198 34 018.4 (1998)

Krenkel, Walter ; Kochendörfer, Richard:
Verfahren zur Herstellung einer Reibeinheit mittels Infiltration eines porösen Kohlenstoffkörpers mit flüssigem Silizium.
DE4438455 C1 (1994)

1999

Krenkel, Walter:
LSI-Verfahren zur Herstellung von faserverstärkten Keramiken : Herstellung, Eigenschaften, Anwendungsbeispiele.
1999
Event: Werkstoff-Kolloquium 1999 des DLR-Instituts für Werkstoff-Forschung , 9. Dezember 1999 , Köln.
(Conference item: Conference , Speech )

Brehm, Holger ; Glatzel, Uwe:
Modeling the Anisotropic Primary and Secondary Creep Behavior of Single Crystals and Comparison with Experimentally Observed Behavior of Various Alloys.
In: Mishra, Rajiv S. (ed.): Creep behavior of advanced materials for the 21st century : proceedings of a symposium sponsored by the MPMD and SMD divisions of the Minerals, Metals & Materials Society. - Warrendale, Pa. : Minerals, Metals & Materials Society, 1999 . - pp. 359-368

Renz, Ralph ; Krenkel, Walter ; Schöppach, Achim ; Kaufmann, Paul ; Petasch, Thomas:
Athermalisiertes Teleskop.
DE 199 33 248.7 (1999)

Hall, Nicole ; Seiz, Susanne ; Krenkel, Walter:
Biomorphe SiC-Keramiken aus technischen Hölzern.
In: Verbundwerkstoffe und Werkstoffverbunde. - Weinheim : Wiley-VCH, 1999 . - pp. 301-306

Thiel, S. ; Glatzel, Uwe ; Mack, Thomas:
Characterization of Phases in Oxidation Protecting Coatings for Superalloys.
In: 4th International Congress on Energy, Environment and Technological Innovation. - Rom , 1999 . - pp. 645-649

Scheibel, Thomas ; Siegmund, Heiko Ingo ; Jaenicke, Rainer ; Ganz, Peter ; Lilie, Hauke ; Buchner, Johannes:
The charged region of Hsp90 modulates the function of the N-terminal domain.
In: Proceedings of the National Academy of Sciences of the United States of America. Vol. 96 (1999) Issue 4 . - pp. 1297-1302.
DOI: https://doi.org/10.1073/pnas.96.4.1297

Scheibel, Thomas ; Weikl, Tina ; Rimerman, Ronald ; Smith, David ; Lindquist, Susan L. ; Buchner, Johannes:
Contribution of N- and C-terminal domains to the function of Hsp90 in Saccharomyces cerevisiae.
In: Molecular Microbiology. Vol. 34 (1999) Issue 4 . - pp. 701-713.
DOI: https://doi.org/10.1046/j.1365-2958.1999.01632.x

Schulte-Fischedick, Jan ; Frieß, Martin ; Krenkel, Walter ; Kochendörfer, Richard ; König, M.:
Crack Microstructure During the Carbonization of Carbon Fibre Reinforced Plastics to Carbon/Carbon Composites.
1999
Event: ICCM - 12 Europe , 05.07.1999 , Paris, Frankreich.
(Conference item: Conference , Paper )

Thielicke, Bärbel ; Soltész, Uwe ; Krenkel, Walter ; Morawietz, Katerina:
Creep of a C/C-SiC Composite Under Interlaminar Shear Loading at High Temperatures.
1999
Event: ICCM - 12 Europe , 05.07.1999 , Paris, Frankreich.
(Conference item: Conference , Paper )

Rosemann, Bernd ; Meerkamm, Harald ; Trautner, Stefan ; Feldmann, Klaus:
Design for Recycling, Recycling Data Management and optimal End-of-Life Planning based on Recycling-Graphs.
In: Lindemann, Udo ; Birkhofer, Herbert ; Meerkamm, Harald (ed.): Communication and cooperation of practice and science : proceedings of the 12th International Conference on Engineering Design. Band 3. - München : Technische Univ., 1999 . - pp. 1471-1476 . - (Schriftenreihe Workshop, Design, Konstruktion ; 26,3 )

Tamme, Rainer ; Krenkel, Walter:
Development of CMC Tubes for High Temperature Heat Exchanger Applications.
In: Steels and materials for power plants. - Weinheim : Wiley-VCH, 1999 . - pp. 315-320 . - (EUROMAT 99 ; 7 )
DOI: https://doi.org/10.1002/3527606181.ch55

Nettelbeck, Dirk M. ; Jérôme, Valérie ; Müller, Rolf:
A dual specificity promoter system combining cell cycle-regulated and tissue-specific transcriptional control.
In: Gene Therapy. Vol. 6 (1999) Issue 7 . - pp. 1276-1281.

Rosemann, Bernd ; Feldmann, Klaus ; Meedt, Otto ; Trautner, Stefan ; Meerkamm, Harald:
Entwicklung einer Design-Disassembly Verfahrenskette auf Basis einer recyclingrelevanten Produktkennzeichnung.
In: Statusbericht : 26. Oktober 1999. - Garching : Lehrstuhl für Wassergüte- und Abfallwirtschaft, Technische Univ. München, 1999 . - pp. 129-142 . - (Berichte des Bayerischen Forschungsverbundes für Abfallforschung und Reststoffverwertung ; 11 )

Maier, Hans-Peter ; Maile, Karl ; Henke, T. ; Greiner, A. ; Bill, A. ; Aldinger, F. ; Krenkel, Walter:
Entwicklung von keramischen Bauteilen für die Anwendung im Hochtemperaturbereich von kohlebefeuerten Kraftwerken.
In: Verbundwerkstoffe und Werkstoffverbunde. - Weinheim : Wiley-VCH, 1999 . - p. 537

Krenkel, Walter:
Faserverstärkte Keramiken für zukünftige Hyperschallflugzeuge und Raumtransportsysteme.
1999
Event: Kolloquium des Sonderforschungsbereich 371 "Mikromechanik mehrphasiger Werkstoffe" der Deutschen Forschungsgemeinschaft (DFG) , 29. November 1999 , Geesthacht.
(Conference item: Conference , Speech )

Brehm, Holger ; Glatzel, Uwe:
First Attempt to Develop a Material Model Describing Single Crystal Creep Behavior.
In: Bulatov, Vasily V. (ed.): Multiscale Modelling of Materials. - Warrendale, Pa. : Materials Research Soc., 1999 . - pp. 547-552 . - (MRS Symposium Proceedings ; 538 )

Frieß, Martin ; Krenkel, Walter:
Flüssigsilicierung von graphitierten C/C-Vorkörpern.
In: Verbundwerkstoffe und Werkstoffverbunde. - Weinheim : Wiley-VCH, 1999 . - pp. 442-447

Krenkel, Walter:
Herstellung von Faserkeramiken nach dem Flüssigsilizierverfahren (LSI-Technik).
1999
Event: DGM-Fortbildungsseminar Keramische Verbundwerkstoffe , 27.-28. Oktober 1999 , Stuttgart.
(Conference item: Conference , Speech )

Krenkel, Walter:
Hochleistungsbremsen aus Faserkeramiken.
In: Stauber, Rudolf (ed.): Werkstoffe für die Verkehrstechnik. - Weinheim : Wiley-CH, 1999 . - p. 301 . - (Werkstoffwoche '98 ; 2 )

Frieß, Martin ; Krenkel, Walter:
Influence of Graphitization Temperature on the Properties of C/C-SiC Manufactured via LSI-Processing.
In: Advanced Structural Fiber Composites : Proceedings of Topical Symposium V "Advanced Structural Fiber Composites" of the Forum on New Materials of the 9th CIMTEC-World Ceramics Congress and Forum on New Materials. - Faenza : Techna, 1999 . - pp. 127-134 . - (Advances in Science and Technology ; 22 )

Rosemann, Bernd ; Meerkamm, Harald:
Integrierte Umwelttechnik : eine Herausforderung für die Produktverantwortung.
In: Berichtsheft zum Fachseminar Altelektronik und Produktverantwortung. - Garching : Lehrstuhl für Wassergüte- und Abfallwirtschaft, Technische Univ. München, 1999 . - pp. 71-82 . - (Berichte des Bayerischen Forschungsverbundes für Abfallforschung und Reststoffverwertung ; 10 )

Krenkel, Walter:
Keramische Verbundwerkstoffe : Neue Materialien für den extremen Leichtbau.
1999
Event: Technische Universität Chemnitz , 10. Juni 1999 , Chemnitz.
(Conference item: Other Event type, Speech )

Krenkel, Walter:
Leichtbaubremsen aus C/C-SiC Keramiken.
1999
Event: DGM-Fortbildungsseminar Keramische Verbundwerkstoffe , 27.-28. Oktober 1999 , Stuttgart.
(Conference item: Conference , Speech )

Krenkel, Walter:
Leichtbaustrukturen aus Faserkeramiken.
1999
Event: Werkstoff-Forum 1999, Hannover Messe , 20. April 1999 , Hannover.
(Conference item: Conference , Speech )

Brehm, Holger ; Glatzel, Uwe:
Material model describing the orientation dependent creep behavior of single crystals based on dislocation densities of slip systems.
In: International Journal of Plasticity. Vol. 15 (1999) Issue 3 . - pp. 285-298.
DOI: https://doi.org/10.1016/S0749-6419(98)00071-0

Krenkel, Walter ; Lützenburger, Nicole:
Near Net Shape Manufacture of CMC Components.
1999
Event: ICCM - 12 Europe , 05.07.1999 , Paris, Frankreich.
(Conference item: Conference , Paper )

Knobloch, Carola ; Glock, Karin ; Glatzel, Uwe:
Observations of Orientation Dependent Creep of Ni3Al.
In: George, Easo P. (ed.): High temperature ordered intermetallic alloys VIII. - Warrendale, Pa. : Materials Research Soc., 1999 . - pp. 1-5 . - (MRS Symposium Proceedings ; 552 )

Krenkel, Walter ; Renz, Ralph ; Schöppach, Achim ; Kaufmann, Paul ; Petasch, Thomas:
Optisches System.
199 33 248 (1999)

Siebörger, Dieter ; Glatzel, Uwe:
Orientation Dependent Creep Behavior and Dislocation Structure of Nickel Solid Solution Single Crystals.
In: Sakuma, T. (ed.): Creep and fracture of engineering materials and structures : proceedings. - Uetikon-Zürich : Trans Tech Publ., 1999 . - pp. 253-260
DOI: https://doi.org/10.4028/www.scientific.net/KEM.171-174.253

Siebörger, Dieter ; Glatzel, Uwe:
Orientation-dependent creep behavior and microstructure of nickel solid solution single crystals.
In: Acta Materialia. Vol. 47 (1999) Issue 2 . - pp. 397-406.
DOI: https://doi.org/10.1016/S1359-6454(98)00378-4

Fabig, J. ; Krenkel, Walter:
Principles and New Aspects in LSI-Processing.
In: Advanced Structural Fiber Composites : Proceedings of Topical Symposium V "Advanced Structural Fiber Composites" of the Forum on New Materials of the 9th CIMTEC-World Ceramics Congress and Forum on New Materials. - Faenza : Techna, 1999 . - pp. 141-148 . - (Advances in Science and Technology ; 22 )

Frieß, Martin ; Lützenburger, Nicole ; Krenkel, Walter:
Schadenstolerante CMC-Werkstoffe mit Langzeitoxidationsbeständigkeit bei hohen Temperaturen.
1999
Event: DGM-Symposium Precursorkeramik , 15.-16. April 1999 , Stuttgart.
(Conference item: Conference , Paper )

Thiel, S. ; Wortmann, J. ; Glatzel, Uwe:
A Superalloy with a Low Density.
In: Kern, Heinrich (ed.): Thüringer Werkstofftag : 15. März 1999 ; Vorträge und Poster. - Ilmenau : TU, Inst. für Werkstofftechnik, 1999 . - pp. 121-126

Rosemann, Bernd ; Mogge, Carsten:
Umweltinformationssysteme in der Konstruktion : Voraussetzung zum präventiven Umweltschutz.
In: Dade, Christian ; Schulz, Bernhard (ed.): Management von Umweltinformationen in vernetzten Umgebungen. - Marburg : Metropolis-Verl., 1999 . - pp. 167-175

Schulte-Fischedick, Jan ; Frieß, Martin ; König, M. ; Krenkel, Walter:
Untersuchung der Entstehung des Rißmusters während der Pyrolyse von CFK-Vorkörpern zur Herstellung von C/C-Werkstoffen.
In: Heinrich, Jürgen ; Ziegler, Günter ; Hermel, Waldemar ; Riedel, Hermann (ed.): Keramik : Symposium 9 / Simulation Keramik : Symposium 14. - Weinheim : Wiley-VCH, 1999 . - pp. 595-600 . - (Werkstoffwoche '98 ; 7 )

Schulte-Fischedick, Jan ; Frieß, Martin ; Kochendörfer, Richard ; Krenkel, Walter:
Untersuchungen zur Entstehung des Rißmusters während der Pyrolyse von CFK-Vorkörpern zu C/C-Werkstoffen.
1999
Event: DGM-Symposium Precursorkeramik , 15.-16. April 1999 , Stuttgart.
(Conference item: Conference , Paper )

Krenkel, Walter ; Kochendörfer, Richard:
Verfahren zum dauerhaften Verbinden von wenigstens zwei Bauteilkomponenten zu einem Formkörper.
DE19636223 C2 (1996)

Krenkel, Walter ; Heidenreich, Bernhard:
Verfahren zur Herstellung eines mit Kohlenstoff-Fasern verstärkten, keramisierten Formkörpers und Verwendung eines solchen Formkörpers.
DE 197 49 462.5 (1997)

Krenkel, Walter ; Kochendörfer, Richard:
Vorrichtung zum Fördern eines Mediums.
DE19708825 C2 (1997)

Faisal, A. Aldo ; Fislage, Markus ; Pomplun, Marc ; Rae, Robert ; Ritter, Helge:
Observation of Human Eye Movements to Simulate Visual Exploration of Complex Scenes.
Bielefeld , 1999 . - 34 p.

1998

Link, Thomas ; Knobloch, Carola ; Glatzel, Uwe:
<100> burgers vector in single phase ɣ’ material verified by image simulation.
In: Scripta Materialia. Vol. 40 (1998) Issue 1 . - pp. 85-90.
DOI: https://doi.org/10.1016/S1359-6462(98)00387-X

Renz, Ralph ; Krenkel, Walter:
C/C-SiC Components for High Performance Applications.
In: Crivelli Visconti, Ignazio (ed.): Science, Technologies and Applications : 3 - 6 June, 1998, Naples, Italy, ECCM - 8, European Conference on Composite Materials. Band 4. - Cambridge : Woodhead Publishing, 1998 . - pp. 23-30

Henke, T. ; Krenkel, Walter:
Design of High Performance CMC Brake Disks.
In: Key Engineering Materials. Vol. 164 (1998) Issue 1 . - pp. 421-424.
DOI: https://doi.org/10.4028/www.scientific.net/KEM.164-165.421

Krenkel, Walter ; Renz, Ralph ; Huber, Hans ; Dropmann, Christoph:
Elektromagnetische Notbremse.
DE 198 42 926.6 (1998)

Rosemann, Bernd:
End-of-Life Optimierung komplexer Produkte basierend auf Recycling-Graphen.
In: Technische Universität Darmstadt, Sonderforschungsbereich 392 Entwicklung Umweltgerechter Produkte - Methoden, Arbeitsmittel und Instrumente (ed.): Kolloquium zur Entwicklung umweltgerechter Produkte : Tagungsband. - Darmstadt , 1998

Rosemann, Bernd ; Feldmann, Klaus ; Meedt, Otto ; Trautner, Stefan ; Meerkamm, Harald:
Entwicklung einer Design-Disassembly Verfahrenskette auf Basis einer recyclingrelevanten Produktkennzeichnung.
In: Berichtsheft zum 6. Statusseminar. - Garching : Lehrstuhl für Wassergüte- und Abfallwirtschaft, Technische Univ. München, 1998 . - pp. 103-118 . - (Berichte des Bayerischen Forschungsverbundes für Abfallforschung und Reststoffverwertung ; 9 )

Rosemann, Bernd ; Feldmann, Klaus ; Meedt, Otto ; Trautner, Stefan ; Meerkamm, Harald:
Entwicklung einer Verfahrenskette zur recyclinggerechten Produktgestaltung und effizienten Demontage.
In: Markt- und Kostenvorteile durch Entwicklung umweltverträglicher Produkte. - Düsseldorf : VDI-Verl., 1998 . - pp. 105-124 . - (VDI-Berichte ; 1400 )

Tamme, Rainer ; Krenkel, Walter ; Hasert, U.-F.:
Entwicklung und Einsatzmöglichkeiten keramischer Hochtemperaturwärmetauscher aus C/C-SiC Verbundwerkstoffen.
In: Innovationen bei der rationellen Energieanwendung : neue Chancen für die Wirtschaft ; Tagung Dortmund, 3. und 4. März 1998. - Düsseldorf : VDI-Verlag, 1998 . - pp. 369-382 . - (VDI-Berichte ; 1385 )

Nichtl, Alfons ; Buchner, Johannes ; Jaenicke, Rainer ; Rudolph, Rainer ; Scheibel, Thomas:
Folding and association of β-galactosidase.
In: Journal of Molecular Biology. Vol. 282 (1998) Issue 5 . - pp. 1083-1091.
DOI: https://doi.org/10.1006/jmbi.1998.2075

Krenkel, Walter ; Kochendörfer, Richard:
Gezahntes Bauelement zur mechanischen Kraftübertragung.
DE19712287 C1 (1997)

Krenkel, Walter:
Herstellung von Faserkeramiken durch Flüssigphasen-Silicierung (LSI-Verfahren).
1998
Event: DGM-Fortbildungsseminar Keramische Verbundwerkstoffe , 20.-21. Oktober 1998 , Stuttgart.
(Conference item: Conference , Speech )

Scheibel, Thomas ; Buchner, Johannes:
The Hsp90 Complex : A Super-Chaperone Machine as a Novel Drug Target.
In: Biochemical Pharmacology. Vol. 56 (1998) Issue 6 . - pp. 675-682.
DOI: https://doi.org/10.1016/S0006-2952(98)00120-8

Völkl, Rainer ; Glatzel, Uwe ; Feller-Kniepmeier, Monika:
ImageCBED++: an Easy to Use Program for Rapid Analysis of CBED HOLZ Line Patterns.
In: Electron Microscopy 1998 : Proceedings. Band 3. Materials Science 2. - Bristol : Institute of Physics Publ., 1998 . - pp. 785-786

Krenkel, Walter:
Keramische Hochleistungsbremsen aus C/C-SiC.
1998
Event: DGM-Fortbildungsseminar Keramische Verbundwerkstoffe , 20.-21. Oktober 1998 , Stuttgart.
(Conference item: Conference , Speech )

Völkl, Rainer ; Glatzel, Uwe ; Feller-Kniepmeier, Monika:
Measurement of the unconstrained misfit in the Nickel-Base Superalloy CMSX-4 with CBED.
In: Scripta Materialia. Vol. 38 (1998) Issue 6 . - pp. 893-900.
DOI: https://doi.org/10.1016/S1359-6462(97)00559-9

Krenkel, Walter ; Nedele, Martin:
Novel Concept of a High Temperature Heat Exchanger.
In: Innovative Materials in Advanced Energy Technologies : Proceedings of Topical Symposium VII - "Innovative Materials in Advanced Energy Technologies" of the Forum on New Materials of the 9. CIMTEC-World Ceramics Congress and Forum on New Materials, Florence, Italy, June 14 - 19, 1998. - Faenza : Techna, 1998 . - pp. 289-296 . - (Advances in Science and Technology ; 24 )

Nettelbeck, Dirk M. ; Jérôme, Valérie ; Müller, Rolf:
A strategy for enhancing the transcriptional activity of weak cell type-specific promoters.
In: Gene Therapy. Vol. 5 (1998) Issue 12 . - pp. 1656-1664.

Rosemann, Bernd ; Meerkamm, Harald ; Schweiger, Willi:
Sustainable Development as a Basis for the Reduction of Waste.
In: 2nd International BayFORREST Conference on Development and Application of Waste Technology : an international challenge ; July 1 - 3, 1998. - Garching : Bayerischer Forschungsverbund Abfallforschung und Reststoffverwertung, 1998

Scheibel, Thomas ; Weikl, Tina ; Buchner, Johannes:
Two chaperone sites in Hsp90 differing in substrate specificity and ATP dependence.
In: Proceedings of the National Academy of Sciences of the United States of America. Vol. 95 (1998) Issue 4 . - pp. 1495-1499.

1997

Sass, Volker ; Siebörger, Dieter ; Knobloch, Carola ; Glatzel, Uwe:
Anisotropic Creep Behavior of a Nickel-Based Superalloy Compared with Nickel Solid Solution and γ' Phase Single Crystals.
In: Earthman, James C. ; Mohamed, Farghalli A. (ed.): Creep and fracture of engineering materials and structures : proceedings. - Warrendale, Pa. : Mineral, Metals & Materials Soc., 1997 . - pp. 687-696

Siebörger, Dieter ; Sass, Volker ; Knobloch, Carola ; Glatzel, Uwe:
Anisotropic Creep Behavior of a Nickel-Based Superalloy in Comparison with Single Phase Nickel Solid Solution and γ' Phase Single Crystals.
In: Khan, Akhtar S. (ed.): Physics and mechanics of finite plastic and viscoplastic deformation : proceedings. - Fulton, Md. : NEAT Press, 1997 . - pp. 87-88

Knobloch, Carola ; Toloraia, V. N. ; Glatzel, Uwe:
Anisotropic creep of Ni3(AlTiTa).
In: Scripta Materialia. Vol. 37 (1997) Issue 10 . - pp. 1491-1498.
DOI: https://doi.org/10.1016/S1359-6462(97)00299-6

Knobloch, Carola ; Sass, Volker ; Siebörger, Dieter ; Glatzel, Uwe:
Anisotropie creep behavior of a nickel-based superalloy compared with single phase nickel solid solution and γ′ phase single crystals.
In: Materials Science and Engineering: A. Vol. 234-236 (1997) . - pp. 237-241.
DOI: https://doi.org/10.1016/S0921-5093(97)00142-1

Scheibel, Thomas ; Neuhofen, Sonja ; Weikl, Tanja ; Mayr, Christian ; Reinstein, Jochen ; Vogel, Pia D. ; Buchner, Johannes:
ATP-binding Properties of Human Hsp90.
In: The Journal of Biological Chemistry. Vol. 272 (1997) Issue 30 . - pp. 18608-18613.
DOI: https://doi.org/10.1074/jbc.272.30.18608

Pfeiffer, H. ; Heidenreich, Bernhard ; Schlenker, Lars ; Krenkel, Walter:
Bremsscheiben aus keramischen Verbundwerkstoffen für Schienenfahrzeuge.
In: Werkstoffe für die Verkehrstechnik. - Frankfurt : DGM-Informationsges., 1997 . - p. 275 . - (Werkstoffwoche / Symposium ; 1996,2 )

Krenkel, Walter:
C/C-SiC Materials for Terrestrial Applications.
1997
Event: German-Brazilian Workshop on Aerospace Technology , 20.-24. October 1997 , São José dos Campos, Brasil.
(Conference item: Conference , Speech )

Krenkel, Walter:
C/C-SiC Werkstoffe für höchste Beanspruchungen.
1997
Event: Arbeitskreis Verstärkung keramischer Werkstoffe , 14. März 1997 , Bremen.
(Conference item: Conference , Speech )

Krenkel, Walter:
Development of an Intake Flap for Hypersonic Propulsion Systems.
1997
Event: German-Brazilian Workshop on Aerospace Technology , 20.-24. October 1997 , São José dos Campos, Brasil.
(Conference item: Conference , Speech )

Chudej, Kurt:
Effiziente indirekte Lösung zustandsbeschränkter Flugbahnoptimierungsaufgaben mit Minimalkoordinaten.
In: Sonderforschungsbereich 255 Transatmosphärische Flugsysteme, Technische Universität München (ed.): Proc. des SFB 255-Workshops Optimalsteuerungsprobleme von Hyperschall-Flugsystemen, Workshop, Universität Greifswald. - München, Deutschland , 1997 . - pp. 115-123

Krenkel, Walter:
Extremer Leichtbau mit keramischen Verbundwerkstoffen.
In: Jahresbericht des Instituts für Bauweisen- und Konstruktionsforschung des DLR Stuttgart. Vol. 1996/97 (1997) . - pp. 50-55.

Krenkel, Walter:
Faserverstärkte Hochleistungskeramik Bayern Innovativ.
1997
Event: Innovation durch Technische Keramik , 2. Juli 1997 , Ingolstadt.
(Conference item: Conference , Speech )

Krenkel, Walter ; Kochendörfer, Richard ; Heinrich, Horst:
Honschleifwerkzeug zur spanabhebenden Bearbeitung von Werkstücken.
DE19703261 A1 (1997)

Scheibel, Thomas ; Buchner, Johannes:
The HsP90 Family : an overview.
In: Gething, Mary-Jane (ed.): Guidebooks to Molecular Chaperones and Protein-Folding Catalysts. - New York : Oxford University Press, 1997 . - pp. 147-151

Krenkel, Walter:
The Liquid Silicon Infiltration Process (LSI) : an Alternative Method to Manufacture CMC Composites.
1997
Event: German-Brazilian Workshop on Aerospace Technology , 20.-24. October 1997 , São José dos Campos, Brasil.
(Conference item: Conference , Speech )

Fabig, J. ; Krenkel, Walter:
Mikrostruktur und Eigenschaften von C/C-SiC Werkstoffen.
In: Werkstoff- und Verfahrenstechnik : Symposium 6, Werkstoffwoche '96. - Frankfurt : DGM Informationsges., 1997 . - p. 957

Dollhopf, Volkmar ; Krenkel, Walter:
RTM Processing of High Performance Composites.
In: Proceedings / Eleventh International Conference on Composite Materials, Gold Coast, Queensland, Australia, 14th - 18th July 1997 [ICCM-11]. Vol. 4: Composites processing and microstructures. - Gold Coast, Australia , 1997 . - IV-1-IV-10

Scheibel, Thomas ; Bell, Stefan ; Walke, Stefan:
S. cerevisiae and sulfur: a unique way to deal with the environment.
In: The FASEB Journal. Vol. 11 (1997) Issue 11 . - pp. 917-921.

Krenkel, Walter ; Heidenreich, Bernhard:
Stromabnehmer für ein Fahrzeug, insbesondere für ein Schienenfahrzeug.
DE19524708 C2 (1995)

Fabig, J. ; Krenkel, Walter:
Untersuchung von Phenolharzen als CMC-Precursoren.
In: Friedrich, Klaus (ed.): Verbundwerkstoffe und Werkstoffverbunde : [Vortragstexte der Tagung Verbundwerkstoffe und Werkstoffverbunde, veranstaltet vom 17. - 19. September 1997 in Kaiserslautern]. - Frankfurt : DGM Informationsgesellschaft, 1997 . - p. 185

Rosemann, Bernd ; Feldmann, Klaus ; Scheller, Herbert:
Visuelle Erkennung elektronischer Bauelemente.
In: Entsorgungspraxis. Vol. 15 (1997) Issue 3 . - pp. 28-32.

Rosemann, Bernd ; Feldmann, Klaus ; Scheller, Herbert:
Visuelle Klassifizierung elektronischer Bauelemente : Der erste Schritt zum Elektronik-Recycling.
In: F & M : Feinwerktechnik, Mikrotechnik, Mikroelektronik. Vol. 105 (1997) Issue 7/8 . - pp. 512-513.

Krenkel, Walter ; Kochendörfer, Richard ; Frieß, Martin:
Werkzeug zur spanabhebenden Bearbeitung von Werkstücken.
DE19703202 A1, US 6273 824 (2001) (1997)

1996

Sass, Volker ; Glatzel, Uwe ; Feller-Kniepmeier, Monika:
Anisotropic creep properties of the nickel-base superalloy CMSX-4.
In: Acta Materialia. Vol. 44 (1996) Issue 5 . - pp. 1967-1977.
DOI: https://doi.org/10.1016/1359-6454(95)00315-0

Jakob, Ursula ; Scheibel, Thomas ; Bose, Suchira ; Reinstein, Jochen ; Buchner, Johannes:
Assessment of the ATP Binding Properties of Hsp90.
In: The Journal of Biological Chemistry. Vol. 271 (1996) Issue 17 . - pp. 10035-10041.
DOI: https://doi.org/10.1074/jbc.271.17.10035

Dai, Y. ; Kochendörfer, Richard ; Krenkel, Walter:
Coating of Fibre Bundles in C/C-SiC Composite Using Sol-Gel Techniques.
In: Wang, Ziqiang ; Chou, Tsu-Wei (ed.): Progress in Advanced Materials and Mechanics : Proceedings of the International Conference on Advanced Materials : August 12-15, 1996, Beijing, China. - Beijing, China : Peking University Press, 1996 . - p. 84

Altstädt, Volker ; Loth, W. ; Schlarb, Alois:
Comparison of Fatigue Test Methods for Research and Development of Polymers and Polymer Composites.
In: Cardon, Albert H. (ed.): Progress in Durability Analysis of Composite Systems : proceedings. - Rotterdam : Balkema, 1996 . - pp. 75-80

Sass, Volker ; Glatzel, Uwe ; Feller-Kniepmeier, Monika:
Creep Anisotropy in the Monocrystalline Nickel-Base Superalloy CMSX-4.
In: Kissinger, R. D. ; Deye, D. J. ; Anton, D. L. ; Cetel, A. D. ; Nathal, M. V. ; Pollock, T. M. ; Woodford, D. A. (ed.): Superalloys 1996. - Warrendale, Pa. , 1996 . - pp. 283-290

Henke, T. ; Mason, Nicole ; Krenkel, Walter:
In Situ Joined CMC Components.
In: Key Engineering Materials. Vol. 127-131 (1996) . - pp. 313-320.
DOI: https://doi.org/10.4028/www.scientific.net/KEM.127-131.313

Henke, T. ; Krenkel, Walter:
Investigation of a Joining Method for Ceramic Matrix Composites.
1996
Event: Fifth European Interregional Conference on Ceramics (CEC5) , 09.-10. September 1996 , Toulon, Frankreich.
(Conference item: Conference , Other Presentation type)

Krenkel, Walter:
Keramische Verbundwerkstoffe für Hochleistungsbremsen.
In: Ziegler, Günter (ed.): Verbundwerkstoffe und Werkstoffverbunde : [Vortragstexte der Tagung Verbundwerkstoffe und Werkstoffverbunde, veranstaltet am 24. und 25. Oktober 1995 in Bayreuth]. - Oberursel, Germany : DGM Informationsges., 1996 . - pp. 329-332

Kochendörfer, Richard ; Krenkel, Walter:
The LSI Process : A Cost Effective Processing Technique for Ceramic Matrix Composites.
In: Wang, Ziqiang ; Chou, Tsu-Wei (ed.): Progress in Advanced Materials and Mechanics : Proceedings of the International Conference on Advanced Materials : August 12-15, 1996, Beijing, China. - Beijing, China : Peking University Press, 1996 . - p. 192

Krenkel, Walter ; Kochendörfer, Richard ; Krapf, Jürgen:
Reibeinheit mit Wärmeabfuhr-Formkörper.
DE19651798 A1 (1996)

1995

Völkl, Rainer ; Glatzel, Uwe ; Feller-Kniepmeier, Monika:
Analysis of Matrix and Interfacial Dislocations in the Nickel-Based Superalloy CMSX 4 after creep in [111] direction.
In: The 4th European Conference on Advanced Materials and Processes. Band 2. Symposium D - structural metallic materials, symposium E - surface engineering. - Milano : Associazione Italiana di Metallurgia, 1995 . - pp. 573-576

Krenkel, Walter ; Kochendörfer, Richard:
Bremsscheibe.
DE 596 10 833.8 (1996)

Wanderka, Nelia ; Glatzel, Uwe:
Chemical composition measurements of a nickel-base superalloy by atom probe field ion microscopy.
In: Materials Science and Engineering: A. Vol. 203 (1995) Issue 1-2 . - pp. 69-74.
DOI: https://doi.org/10.1016/0921-5093(95)09825-9

Kochendörfer, Richard ; Krenkel, Walter:
CMC Intake Ramp for Hypersonic Propulsion Systems.
In: High-Temperature Ceramic-Matrix Composites : [proceedings of the Second International Conference on High-Temperature Ceramic-Matrix Composites, held August 21 - 24, 1995, in Santa Barbara, CA] Vol.1: Design, Durability and Performance /(Eds.: Anthony Glyn Evans, Roger Naslain). - Abington : Ceramic Transactions, 1995 . - pp. 13-22

Dai, Y. ; Kochendörfer, Richard ; Krenkel, Walter:
Coating of Fibre Bundle in C/C-SiC Composite Obtained by Colloidal Method.
In: 3rd European Workshop on High Temperature Materials : Stuttgart, Germany, October 25 - 27, 1995. - Paris : European Space Agency, 1995 . - pp. 25-31 . - (ESA WPP / European Space Agency ; 104 )

Glatzel, Uwe ; Müller, Andreas ; Reimers, Walter ; Feller-Kniepmeier, Monika:
Determination of Internal Strains in Single Crystal Nickel-Based Superalloys by Neutron Diffraction.
In: The 4th European Conference on Advanced Materials and Processes. Band 2. Symposium D - structural metallic materials, symposium E - surface engineering. - Milano : Associazione Italiana di Metallurgia, 1995 . - pp. 233-242

Reimer, T. ; Krenkel, Walter:
Development of Extremely Lightweight C/C-SiC Structures.
In: 2nd European Workshop on Thermal Protection Systems : Stuttgart, Germany, October 23 - 25, 1995. - Paris : European Space Agency, 1995 . - pp. 23-27 . - (ESA WPP / European Space Agency ; 103 )

Heimann, D. ; Bill, J. ; Aldinger, F. ; Schanz, P. ; Gern, F. H. ; Kochendörfer, Richard ; Krenkel, Walter:
Development of Oxidation Protected Carbon/Carbon.
In: Zeitschrift für Flugwissenschaften und Weltraumforschung. Vol. 19 (1995) . - p. 180.

Krenkel, Walter:
Entwicklung keramischer Verbundstrukturen mittels Flüssigsilicierung von C/C.
1995
Event: Werkstoffkolloquium ´95 des DLR, Langfaserverstärkte Keramikverbunde; Hochtemperaturfeste Werkstoffe für die Luft- und Raumfahrt , 14. Dezember 1995 , Köln.
(Conference item: Conference , Speech )

Kochendörfer, Richard ; Krenkel, Walter:
Faserkeramik : Eigenschaften und Qualitätssicherung.
In: Dinkler, D. (ed.): Space Course 1995 : Lehrgang über Raumtransportsysteme. - Stuttgart , 1995 . - pp. 341-352

van Brug, Eric ; Mason, Nicole ; Krenkel, Walter:
High Temperature Mechanical and Microstructural Evaluation of a C/C-SiC Material.
In: 3rd European Workshop on High Temperature Materials : Stuttgart, Germany, October 25 - 27, 1995 / jointly organised by ESA; DARA; DLR; IKE. - Paris : European Space Agency, 1995 . - pp. 53-59 . - (ESA WPP / European Space Agency ; 104 )

Kochendörfer, Richard ; Hald, Hermann ; Weihs, H. ; Krenkel, Walter:
Konstruieren mit faserkeramischen Werkstoffen.
In: Dinkler, D. (ed.): Space Course 1995 : Lehrgang über Raumtransportsysteme. - Stuttgart , 1995 . - pp. 355-365

Altstädt, Volker:
Moderne Prüfmethoden zur Beschreibung des Ermüdungsverhaltens von Polymerwerkstoffen.
1995
Event: Konferenz des Deutschen Verbandes für Materialforschung und -prüfung e.V. , 1995 .
(Conference item: Conference , Speech )

Gern, F. H. ; Krenkel, Walter:
Morphology and Infiltration Dynamics of Liquid Siliconized Carbon/Carbon.
In: Poursartip, Anoush ; Street, K. (ed.): Proceedings of the Tenth International Conference on Composite Materials. Bd. 3. Processing and Manufacturing. - Cambridge : Woodhead Publishing Limited, 1995 . - p. 61

Shen, Yong ; Ozzano, Claudia ; Pietranera, Natalino ; Krenkel, Walter ; Nedele, Martin:
Non-Destructive Evaluation of the C/C-SiC Ceramic Matrix Composite Material Developed by the DLR.
In: High Temperatures, High Pressures. Vol. 27/28 (1995) . - pp. 293-297.

Iffländer, Klaus ; Gualco, Giuseppe ; Rosatelli, Franco ; Hampshire, Stuart ; van Brug, Eric ; Ferrière, Alain ; Rodriguez, Gloria ; Fordham, Richard ; Dupel, Pascal ; Mason, Nicole ; Krenkel, Walter:
Service-Representative Characterisation of CMC-Materials for Advanced Gas Turbines.
In: High Temperatures, High Pressures. Vol. 27/28 (1995) Issue 3 . - pp. 313-320.

Fabig, J. ; Krenkel, Walter:
Tailoring of Microstructure in C/C-SiC Composites.
In: Proceedings of the Tenth International Conference on Composite Materials / 4. Characterization and ceramic matrix composites. - Cambridge : Woodhead Publishing Limited, 1995 . - p. 601

1994

Völkl, Rainer ; Glatzel, Uwe ; Feller-Kniepmeier, Monika:
Analysis of matrix and interfacial dislocations in the nickel base superalloy CMSX-4 after creep in [1̄11] direction.
In: Scripta Metallurgica et Materialia. Vol. 31 (1994) Issue 11 . - pp. 1481-1486.
DOI: https://doi.org/10.1016/0956-716X(94)90060-4

Krenkel, Walter ; Kochendörfer, Richard:
Bremsscheibe für Scheibenbremsen.
DE 595 07 523.1 (1995)

Glatzel, Uwe ; Müller, Andreas:
Calculated and Measured Internal Strains of Creep Deformed Single Crystal Nickel Based Superalloys.
In: Andersen, S. I. (ed.): Numerical predictions of deformation processes and the behavior of real materials. - Roskilde : Risø National Laboratory, 1994 . - pp. 319-324

Krenkel, Walter:
CMC Materials for High Performance Brakes.
In: Proceedings / 27th ISATA - International Symposium on Automotive Technology and Automation, 1994 Aachen, Germany, 31st October - 4 November : Conference on Supercars. - Croydon : Automotive Automation Ltd., 1994 . - 863 S.

Dollhopf, Volkmar ; Kocian, F. ; Krenkel, Walter:
Entwicklung integraler Leichtbaustrukturen aus Faserkeramik.
In: Leichtbaustrukturen und Leichte Bauteile : Tagung Duisburg, 9. und 10. März 1994 / Werkstofftag '94. - Düsseldorf : VDI-Verlag, 1994 . - p. 473 . - 907 S. . - (VDI-Berichte ; 1080 )

Glatzel, Uwe ; Müller, Andreas:
Internal Strains of a Creep Deformed Single Crystal Nickel-Based Superalloy.
In: Neumann, Dan A. ; Russell, T. P. ; Wuensch, B. J. (ed.): Neutron Scattering in Materials Science II. - Pittsburgh , 1994 . - pp. 397-402 . - (Materials Research Society Symposium Proceedings ; 376 )
DOI: https://doi.org/10.1557/PROC-376-397

Glatzel, Uwe:
Microstructure and Internal Strains of Undeformed and Creep Deformed Samples of a Nickel-Base Superalloy.
Berlin : Köster , 1994 . - 80 p.

Glatzel, Uwe ; Müller, Andreas:
Neutron scattering experiments with a nickel base superalloy part I : Material and experiment.
In: Scripta Metallurgica et Materialia. Vol. 31 (1994) Issue 3 . - pp. 285-290.
DOI: https://doi.org/10.1016/0956-716X(94)90284-4

Glatzel, Uwe:
Neutron scattering experiments with a nickel base superalloy part II : Analysis of intensity profiles.
In: Scripta Metallurgica et Materialia. Vol. 31 (1994) Issue 3 . - pp. 291-296.
DOI: https://doi.org/10.1016/0956-716X(94)90285-2

1993

Altstädt, Volker ; Boyd, Jack ; Recker, Hans ; Tesch, Helmut ; Weber, Thomas:
Bismaleimide resin systems toughened by addition of preformed functionalized low Tg elastomer particles.
US5532296A (1993)

Krenkel, Walter:
Das Anwendungspotential faserkeramischer Werkstoffe.
1993
Event: Werkstoff-Forum , 26. April 1993 , Hannover Messe.
(Conference item: Conference , Speech )

Weihs, H. ; Krenkel, Walter:
Assessment of Technical Aerospace Planes in Europe.
In: Wolf, D. M. (ed.): Assessment of Technical, Economic and Policy Issues Associated with the Development of Future Aerospace Planes in Europe : Final Report. Chapter 4.4 Materials & Structures. - [Köln] , 1993 . - (Report for the CEC DGXII Contract ETES ; 0037 )

Krenkel, Walter:
CMC Design Consequences.
In: Introduction of Ceramics into Aerospace Structural Composites : papers presented at a workshop held by AGARD Structures and Materials Panel, in Antalya, Turkey, 21. - 22. April 1993. - Neuilly sur Seine, France : Advisory Group for Aerospace Research and Development / AGARD, 1993 . - p. 13 . - Getr. Zähl. . - (AGARD Report ; 795 )

Schanz, P. ; Krenkel, Walter:
CMC via the Liquid Infiltration Process.
In: Martinez, S. ; Clavaguera, Narcis (ed.): Elaboration, thermomechanical and physicochemical properties of ceramics : Fourth "4 motors for Europe" Interregional Colloquium on Ceramics "C.I.E.C.4", Salou (Catalonia), April 15-16,1993. - Barcelona : Publicacions Universitat de Barcelona, 1993

Schanz, P. ; Krenkel, Walter:
Description of the Mechanical and Thermal Behaviour of Liquid Siliconized C/C.
In: High Temperature Ceramic Matrix Composites : HT-CMC 1; [... proceedings of the International Conference on High Temperature Ceramic Matrix Composites ... held in Bordeaux ...]; 6th European Conference on Composite Materials, 20 - 24 September 1993, Bordeaux / EACM. - (Eds.: R. Naslain, J. Lamon, D. Doumeingts). - Abington : Woodhead Publishing, 1993 . - p. 715 . - XXIV, 827 S.

Glatzel, Uwe ; Forbes, Keith R. ; Nix, William D.:
Dislocation energies for an anisotropic cubic crystal: Calculations and observations for NiAl.
In: Philosophical Magazine A. Vol. 67 (1993) Issue 2 . - pp. 307-323.
DOI: https://doi.org/10.1080/01418619308207160

Krenkel, Walter:
Faserverbundwerkstoffe mit Keramik-Matrix.
1993
Event: Werkstoff-Forum , 26. April 1993 , Hannover Messe.
(Conference item: Conference , Speech )

Forbes, Keith R. ; Glatzel, Uwe ; Dariola, Ram ; Nix, William D.:
High Temperature Deformation of Single Crystals of NiAl.
In: Baker, Ian ; Dariola, Ram ; Whittenberger, J. D. ; Yoo, M. H. (ed.): High-Temperature Ordered Intermetallic Alloys V. - Pittsburgh , 1993 . - p. 45 . - (Materials Research Society Symposium Proceedings ; 288 )
DOI: https://doi.org/10.1557/PROC-288-45

Krenkel, Walter ; Dollhopf, Volkmar ; Schanz, P. ; Eraso, C. ; Scheiffele, M.:
Manufacturing and Characterization of C/C-SiC Tubes.
In: 5th International Aerospace Planes and Hypersonics Technologies Conference. - Reston, Va : American Institute of Aeronautics and Astronautics, 1993 . - 8 S.

Gern, F. H. ; Krenkel, Walter:
Microstructure and Characteristics of CMC Manufactured via the Liquid Phase Route.
In: Proceedings of the Ninth International Conference on Composite Materials (ICCM 9) Vol. 2: Ceramic matrix composites and other systems. - Zaragoza : Univ. of Zaragoza, 1993 . - p. 173

Glatzel, Uwe ; Forbes, Keith R. ; Nix, William D.:
TEM Observations of Dislocation Structures in Single Crystals of NiAl after High Temperature Creep.
In: Baker, Ian ; Dariola, Ram ; Whittenberger, J. D. ; Yoo, M. H. (ed.): High-Temperature Ordered Intermetallic Alloys V. - Pittsburgh , 1993 . - pp. 385-390 . - (Materials Research Society Symposium Proceedings ; 288 )
DOI: https://doi.org/10.1557/PROC-288-385

1992

Schanz, P. ; Krenkel, Walter:
Faserkeramische Werkstoffe.
In: Bunk, W. (ed.): BDLI-Werkstofftag '91 : Vortragstexte. - [Bonn] : Bundesverband der Deutschen Luftfahrt-, Raumfahrt- und Ausrüstungsindustrie e.V., 1992

Schanz, P. ; Krenkel, Walter:
Fiber Ceramic Structures Based on Liquid Impregnation Technique.
In: Acta Astronautica. Vol. 28 (1992) . - p. 159.

Krenkel, Walter:
Flüssigsilizierte faserkeramische Werkstoffe : Herstellung, Eigenschaften, Anwendungen.
1992
Event: DLR-Bauweisen-Kolloquium , 10. April 1992 , Stuttgart.
(Conference item: Conference , Speech )

Müller, Lothar ; Glatzel, Uwe ; Feller-Kniepmeier, Monika:
Modelling thermal misfit stresses in nickel-base superalloys containing high volume fraction of γ′ phase.
In: Acta Metallurgica et Materialia. Vol. 40 (1992) Issue 6 . - pp. 1321-1327.
DOI: https://doi.org/10.1016/0956-7151(92)90433-F

Weihs, H. ; Krenkel, Walter:
Technologiefolgenabschätzung - Studie Sänger / Technologiebereich Werkstoffe und Bauweisen.
[Stuttgart] : DLR - Institut für Bauweisen- und Konstruktionsforschung, 1992 . - 23 p. - (DLR-IB ; 435-92/11 )

1991

Pesch, Hans Josef:
High-Precission Solutions of Optimal Control Problems with Applications in Aerospace Engineering.
1991
Event: Seminar, Mathematische Gesellschaft der UdSSR, Moscow Institute of Electrical Machinery, Department of Cybernetics , 25.4.1991 , Moskau, Rußland.
(Conference item: Lecture series , Speech )

Müller, Lothar ; Glatzel, Uwe ; Feller-Kniepmeier, Monika:
Elastic Interaction in Nickel-Based Superalloys Containing High Volume Fraction of γ' Phase.
In: Boehler, Jean-Paul ; Khan, Akhtar S. (ed.): Anisotropy and Localization of Plastic Deformation. - London , 1991 . - pp. 512-515

Schanz, P. ; Krenkel, Walter:
Faserkeramiken : Werkstoffe für thermomechanisch hochbeanspruchte Strukturen.
In: DLR-Nachrichten : Mitteilungsblatt der Deutschen Forschungsanstalt für Luft- und Raumfahrt. (1991) Issue 65 . - pp. 40-45.

Krenkel, Walter:
Herstellung von Faserkeramiken nach dem Flüssigimprägnier-Verfahren.
1991
Event: Workshop Hyperschallfluggeräte , 17.-18. Juli 1991 , Technische Universität Braunschweig.
(Conference item: Conference , Speech )

Krenkel, Walter:
Möglichkeiten und Grenzen faserverstärkter Keramiken.
1991
Event: DKG-Seminar Materialgerechtes Design für keramische Bauteile , 19.-20. März 1991 , DLR Stuttgart.
(Conference item: Conference , Speech )

Glatzel, Uwe ; Feller-Kniepmeier, Monika:
Microstructure and dislocation configurations in fatigued [001] specimens of the nickel-based superalloy CMSX-6.
In: Scripta Metallurgica et Materialia. Vol. 25 (1991) Issue 8 . - pp. 1845-1850.
DOI: https://doi.org/10.1016/0956-716X(91)90315-R

1990

Krenkel, Walter:
Analyse Zukünftiger Raumtransportsysteme (AZURA) : Studie im Auftrag des BMFT.
Ottobrunn : IABG, 1990

Feller-Kniepmeier, Monika ; Glatzel, Uwe ; Link, Thomas ; Scheunemann-Frerker, Gerold ; Schmidt, Roland:
Entwicklung von Gefüge und Versetzungsstrukturen in der einkristallinen Nickelbasislegierung SRR 99 während Wärmebehandlung und Hochtemperaturkriechen.
In: Fortschrittsberichte VDI : Reihe 5. (1990) Issue 203 . - pp. 53-64.

Feller-Kniepmeier, Monika ; Glatzel, Uwe ; Link, Thomas ; Scheunemann-Frerker, Gerold:
Influence of Internal and External Stresses on the Microstructure of superalloy SRR99 During Heat Treatment and High Temperature Creep.
In: Wilshire, B. ; Evans, R. W. ; The Institute of Metals (ed.): Creep and Fracture of Engineering Materials and Structures. - UK , 1990 . - pp. 323-331

Krenkel, Walter:
Möglichkeiten und Grenzen faserverstärkter Keramiken.
1990
Event: DKG-Seminar Materialgerechtes Design für keramische Bauteile , 12.-13. Juni 1990 , DLR Stuttgart.
(Conference item: Conference , Speech )

Glatzel, Uwe:
Untersuchung zur Hochtemperaturbelastung einkristalliner Nickelbasislegierungen mit hohem Anteil an gamma' Phase : Berechnung elastischer Spannungen und elektronenmikroskopische Untersuchung der Mikrostruktur.
Berlin : Technische Universität , 1990 . - 105 p.

1989

Glatzel, Uwe ; Feller-Kniepmeier, Monika:
Application of a Finite Element Model to the Microstructure of a Nickel-Based Superalloy with High Volume Fraction of γ'-Phase.
In: Exner, Hans E. ; Schumacher, V. (ed.): Advanced Materials and Processes : Proceedings of the First European Conference on Advanced Materials and Processes. - Aachen , 1989 . - pp. 475-480

Glatzel, Uwe ; Feller-Kniepmeier, Monika:
Calculations of internal stresses in the γ/γ′ microstructure of a nickel-base superalloy with high volume fraction of γ′-phase.
In: Scripta Metallurgica. Vol. 23 (1989) Issue 11 . - pp. 1839-1844.
DOI: https://doi.org/10.1016/0036-9748(89)90468-7

Krenkel, Walter:
Development of C/SiC-Composites.
1989
Event: Colloquium Advanced Ceramics , 5.-6. April 1989 , Inst. für Keramik im Maschinenbau, Univ. Karlsruhe.
(Conference item: Conference , Speech )

Krenkel, Walter:
Fabrication and First Test for C/SiC-Composites.
1989
Event: 2nd Joint Israeli-German Status Seminar (NCRD-DLR) , 3.-4. April 1989 , Stuttgart.
(Conference item: Conference , Speech )

Krenkel, Walter:
Fiber Ceramics for Reentry Vehicle Hot Structures.
In: Proceedings of the 40th International Astronautical Congress (IAF). - Amsterdam u.a. , 1989

Hald, Hermann ; Krenkel, Walter:
Liquid Infiltrated C/SiC : An Alternative Material for Hot Space Structures.
In: Spacecraft Structures and Mechanical Testing : proceedings of the international conference ; ESTEC, Noordwijk, The Netherlands, on 24-26 April 1991. - Paris : ESA Publications Division, 1989 . - p. 325 . - (Special Publications / European Space Agency ; 289 )

1988

Krenkel, Walter:
Evaluation of Welded and Adhesive-bonded Carbon-fibre-reinforced Poly(Ether Ether Ketone).
In: Paipetis, Stephanos A. ; Papanicolaou, G. C. (ed.): Engineering Applications of New Composites. - Wallingford : Omega Scientific, 1988 . - pp. 119-126

Glatzel, Uwe ; Lenz, Friedrich:
Optimization of electrostatic immersion lenses.
In: Optik. Vol. 79 (1988) Issue 1 . - pp. 15-18.

1987

Krenkel, Walter:
Fertigung von CFK-Bauteilen.
1987
Event: Seminar Faserverbundwerkstoffe , 12. November 1987 , Industrie- und Handelskammer Mittl. Oberrhein, Karlsruhe.
(Conference item: Conference , Speech )

Krenkel, Walter:
Herstellung von Bauteilen aus endlosfaserverstärkten Kunststoffen.
1987
Event: Seminar Faserverbundwerkstoffe der Zukunft , 21. Mai 1987 , Industrie- und Handelskammer Nordschwarzwald, Pforzheim.
(Conference item: Conference , Speech )

Krenkel, Walter:
Joining Techniques for CFR-PEEK.
1987
Event: DFVLR/NCRD-Status-Seminar on Structural Performance of Polymeric Composites , May 26-27, 1987 , Tel Aviv, Israel.
(Conference item: Conference , Speech )

This list was generated on Tue Jun 24 18:10:47 2025 CEST.
[Top of page]

Use this URL to embed this page in external websites:
https://eref.uni-bayreuth.de/cgi/exportview/subjects/DDC600/XML/DDC600.xml

ERef Bayreuth

Subject area: DDC600 Technology, medicine, applied sciences

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

2001

2000

1999

1998

1997

1996

1995

1994

1993

1992

1991

1990

1989

1988

1987

Subject area: DDC
600 Technology, medicine, applied sciences