Zeitschrift: Materials Science and Engineering: A

2013

Bensch, Matthias ; Konrad, Christian ; Fleischmann, Ernst ; Rae, Catherine M. F. ; Glatzel, Uwe:
Influence of oxidation on near-surface γ' fraction and resulting creep behaviour of single crystal Ni-base superalloy M247LC SX.
In: Materials Science and Engineering: A. Bd. 577 (2013) . - S. 179-188.
ISSN 1873-4936
DOI: https://doi.org/10.1016/j.msea.2013.04.032

Roy, Himadri ; Ray, Ayan ; Barat, K. ; Hochmuth, Christian ; Sivaprasad, S. ; Tarafder, S. ; Glatzel, Uwe ; Ray, K. K.:
Structural variations ahead of crack tip during monotonic and cyclic fracture tests of AISI 304LN stainless steel.
In: Materials Science and Engineering: A. Bd. 561 (2013) . - S. 88-99.
ISSN 1873-4936
DOI: https://doi.org/10.1016/j.msea.2012.10.074

2012

Brunner, Martin ; Bensch, Matthias ; Völkl, Rainer ; Affeldt, Ernst ; Glatzel, Uwe:
Thickness influence on creep properties for Ni-based superalloy M247LC SX.
In: Materials Science and Engineering: A. Bd. 550 (2012) . - S. 254-262.
ISSN 1873-4936
DOI: https://doi.org/10.1016/j.msea.2012.04.067

2010

Scherm, Florian ; Völkl, Rainer ; Neubrand, A. ; Bosbach, Franz ; Glatzel, Uwe:
Mechanical characterisation of interpenetrating network metal–ceramic composites.
In: Materials Science and Engineering: A. Bd. 527 (2010) Heft 4-5 . - S. 1260-1265.
ISSN 1873-4936
DOI: https://doi.org/10.1016/j.msea.2009.09.063

Krause, Michael ; Hausherr, Jan-Marcel ; Krenkel, Walter:
(Micro)-Crack Detection Using Local Radon Transform.
In: Materials Science and Engineering: A. Bd. 527 (2010) Heft 26 . - S. 7126-7131.
ISSN 1873-4936
DOI: https://doi.org/10.1016/j.msea.2010.07.085

Brunner, Martin ; Hüttner, Rainer ; Bölitz, Marie-Christin ; Völkl, Rainer ; Mukherji, Debashis ; Rösler, Joachim ; Depka, Timo ; Somsen, Christoph ; Eggeler, Gunther ; Glatzel, Uwe:
Creep properties beyond 1100°C and microstructure of Co-Re-Cr alloys.
In: Materials Science and Engineering: A. Bd. 528 (2010) Heft 2 . - S. 650-656.
ISSN 1873-4936
DOI: https://doi.org/10.1016/j.msea.2010.09.035

2009

11th International Conference of Creep and Fracture of Engineering Materials and Structures, CREEP 2008.
Hrsg.: Glatzel, Uwe ; Eggeler, G. ; Kostorz, G.
Materials Science and Engineering: A. Bd. 510-511 (2009) .
ISSN 1873-4936

Preußner, Johannes ; Prins, Sara ; Völkl, Rainer ; Liu, Zi-Kui ; Glatzel, Uwe:
Determination of phases in the system chromium-platinum (Cr-Pt) and thermodynamic calculations.
In: Materials Science and Engineering: A. Bd. 510-511 (2009) . - S. 322-327.
ISSN 1873-4936
DOI: https://doi.org/10.1016/j.msea.2008.10.059

Völkl, Rainer ; Wenderoth, Markus ; Preußner, Johannes ; Vorberg, Stefan ; Fischer, Bernd ; Yamabe-Mitarai, Y. ; Harada, H. ; Glatzel, Uwe:
Development of a precipitation-strengthened Pt-base superalloy.
In: Materials Science and Engineering: A. Bd. 510-511 (2009) . - S. 328-331.
ISSN 1873-4936
DOI: https://doi.org/10.1016/j.msea.2008.12.034

Hüttner, Rainer ; Gabel, Johannes ; Glatzel, Uwe ; Völkl, Rainer:
First creep results on thin-walled single-crystal superalloys.
In: Materials Science and Engineering: A. Bd. 510-511 (2009) . - S. 307-311.
ISSN 1873-4936
DOI: https://doi.org/10.1016/j.msea.2008.10.057

Scherm, Florian ; Völkl, Rainer ; van Smaalen, Sander ; Mondal, Swastik ; Plamondon, Philippe ; L'Esperance, Gilles ; Bechmann, Florian ; Glatzel, Uwe:
Microstructural characterization of interpenetrating light weight metal matrix composites.
In: Materials Science and Engineering: A. Bd. 518 (2009) Heft 1-2 . - S. 118-123.
ISSN 1873-4936
DOI: https://doi.org/10.1016/j.msea.2009.04.010

Kunst, Martin ; Fischersworring-Bunk, Andreas ; L'Esperance, Gilles ; Plamondon, Philippe ; Glatzel, Uwe:
Microstructure and dislocation analysis after creep deformation of die-cast Mg-Al-Sr (AJ) alloy.
In: Materials Science and Engineering: A. Bd. 510-511 (2009) . - S. 387-392.
ISSN 1873-4936
DOI: https://doi.org/10.1016/j.msea.2008.07.078

2008

Rudnik, Yegor ; Völkl, Rainer ; Vorberg, Stefan ; Glatzel, Uwe:
The effects of Ta additions on the phase compositions and high temperature properties of Pt base alloys.
In: Materials Science and Engineering: A. Bd. 479 (2008) Heft 1-2 . - S. 306-312.
ISSN 1873-4936
DOI: https://doi.org/10.1016/j.msea.2007.06.066

Völkl, Rainer ; Fischer, Bernd ; Beschliesser, Manuel ; Glatzel, Uwe:
Evaluating strength at ultra-high temperatures - methods and results.
In: Materials Science and Engineering: A. Bd. 483-484 (2008) . - S. 587-589.
ISSN 1873-4936
DOI: https://doi.org/10.1016/j.msea.2006.09.171

Wenderoth, Markus ; Vorberg, Stefan ; Fischer, Bernd ; Yamabe-Mitarai, Y. ; Harada, H. ; Glatzel, Uwe ; Völkl, Rainer:
Influence of Nb, Ta and Ti on microstructure and high-temperature strength of precipitation-hardened Pt-base alloys.
In: Materials Science and Engineering: A. Bd. 483-484 (2008) . - S. 509-511.
ISSN 1873-4936
DOI: https://doi.org/10.1016/j.msea.2006.12.160

2007

Zambaldi, C. ; Roters, F. ; Raabe, D. ; Glatzel, Uwe:
Modeling and experiments on the indentation deformation and recrystallization of a single-crystal nickel-base superalloy.
In: Materials Science and Engineering: A. Bd. 454-455 (2007) . - S. 433-440.
ISSN 1873-4936
DOI: https://doi.org/10.1016/j.msea.2006.11.068

2005

Berndt, Florian ; Krenkel, Walter:
C/C-SiC Composites for Space Applications and Advanced Friction Systems.
In: Materials Science and Engineering: A. Bd. 412 (2005) Heft 1-2 . - S. 177-181.
ISSN 1873-4936
DOI: https://doi.org/10.1016/j.msea.2005.08.204

2002

Schulte-Fischedick, Jan ; Zern, A. ; Mayer, J. ; Rühle, M. ; Frieß, Martin ; Krenkel, Walter ; Kochendörfer, Richard:
The Morphology of Silicon Carbide in C/C-SiC Composites.
In: Materials Science and Engineering: A. Bd. 332 (2002) Heft 1-2 . - S. 146-152.
ISSN 1873-4936
DOI: https://doi.org/10.1016/S0921-5093(01)01719-1

2001

Wöllmer, Silke ; Mack, Thomas ; Glatzel, Uwe:
Influence of tungsten and rhenium concentration on creep properties of a second generation superalloy.
In: Materials Science and Engineering: A. Bd. 319-321 (2001) . - S. 792-795.
ISSN 1873-4936
DOI: https://doi.org/10.1016/S0921-5093(01)01063-2

Siebörger, Dieter ; Knake, Harald ; Glatzel, Uwe:
Temperature dependence of the elastic moduli of the nickel-base superalloy CMSX-4 and its isolated phases.
In: Materials Science and Engineering: A. Bd. 298 (2001) Heft 1-2 . - S. 26-33.
ISSN 1873-4936
DOI: https://doi.org/10.1016/S0921-5093(00)01318-6

1997

Knobloch, Carola ; Sass, Volker ; Siebörger, Dieter ; Glatzel, Uwe:
Anisotropie creep behavior of a nickel-based superalloy compared with single phase nickel solid solution and γ′ phase single crystals.
In: Materials Science and Engineering: A. Bd. 234-236 (1997) . - S. 237-241.
ISSN 1873-4936
DOI: https://doi.org/10.1016/S0921-5093(97)00142-1

1996

Heidelbach, Florian ; Wenk, H.-R. ; Chen, S. R. ; Pospiech, J. ; Wright, S. I.:
Orientation and misorientation characteristics of annealed, rolled and recrystallized copper.
In: Materials Science and Engineering: A. Bd. 215 (1996) Heft 1-2 . - S. 39-49.
ISSN 1873-4936
DOI: https://doi.org/10.1016/0921-5093(96)10264-1

1995

Wanderka, Nelia ; Glatzel, Uwe:
Chemical composition measurements of a nickel-base superalloy by atom probe field ion microscopy.
In: Materials Science and Engineering: A. Bd. 203 (1995) Heft 1-2 . - S. 69-74.
ISSN 1873-4936
DOI: https://doi.org/10.1016/0921-5093(95)09825-9