| 519 |
Phase transitions in soft matter systems |
Löwen, H. ; Watzlawek, M. ; Likos, C. N. ; Schmidt, Matthias ; Jusufi, A. ; Graf, H. ; Denton, A. R. ; von Ferber, C. |
2000 |
| 772 |
Coherent control of the exciton-biexciton system demonstrated in four-wave-mixing
experiments |
Voss, Tobias ; Breunig, Hans Georg ; Rückmann, Ilja ; Gutowski, Jürgen ; Axt, Vollrath Martin ; Kuhn, Tilmann |
2005 |
| 772 |
Mixing of discrete and continuum excitations induced by nonperturbative Coulomb‐correlations |
Axt, Vollrath Martin ; Wühr, J. ; Kuhn, Tilmann |
2005 |
| 772 |
Electron-phonon quantum kinetics beyond the second-order Born approximation |
Lohmeyer, Henning ; Axt, Vollrath Martin ; Kuhn, Tilmann |
2005 |
| 893 |
Spatiotemporal dynamics of charge carriers in quantum dot‐wire systems following delocalized optical excitations |
Reiter, Doris ; Axt, Vollrath Martin ; Kuhn, Tilmann |
2007 |
| 893 |
Combined influence of Coulomb, exchange and phonon couplings on the line shape of quantum dot spectra |
Krügel, A. ; Axt, Vollrath Martin ; Kuhn, Tilmann ; Vagov, Alexei |
2007 |
| 940 |
Studying channelopathies at the functional level using a system identification approach |
Faisal, A. Aldo |
2007 |
| 973 |
Material Development and Processing of Multiscale Structured Ceramics for SOFC-Electrodes |
Neukam, Matthias ; Panneerselvam, Marudhachalam ; Willert-Porada, Monika |
2008 |
| 973 |
Multiscale Structured and Functionally Graded Gas Diffusion Electrodes for PEM-Fuel Cells and Electrodialysis |
Wolf, Hannes ; Franz, M. ; Bienhuels, C. ; Willert-Porada, Monika |
2008 |
| 1027 |
Theory of Thermodynamic Stresses in Colloidal Dispersions at the Glass Transition |
Hajnal, David ; Henrich, Oliver ; Crassous, Jérôme J. ; Siebenbürger, Miriam ; Drechsler, Markus ; Ballauff, Matthias ; Fuchs, Matthias |
2008 |
| 1145 |
Grain size dependence of barchan dune dynamics |
Groh, Christopher ; Aksel, Nuri ; Rehberg, Ingo ; Krülle, Christof A. |
2009 |
| 1168 |
On Some New Adjoining Approaches for State-Constrained Elliptic Optimal Control Problems |
Bechmann, Simon ; Frey, Michael ; Pesch, Hans Josef ; Rund, Armin |
2009 |
| 1168 |
Feedback Stabilization Methods for the Numerical Solution of Systems of Ordinary Differential Equations |
Karafyllis, Iasson ; Grüne, Lars |
2009 |
| 1199 |
Spin decoherence of a confined exciton due to one‐ and two‐phonon assisted transitions |
Roszak, Katarzyna ; Machnikowski, Paweł ; Axt, Vollrath Martin ; Kuhn, Tilmann |
2010 |
| 1542 |
Scaling of the normal coefficient of restitution for wet impacts |
Müller, Thomas ; Gollwitzer, Frank ; Krülle, Christof A. ; Rehberg, Ingo ; Huang, Kai |
2013 |
| 1542 |
Dynamics of rotating spirals in agitated wet granular matter |
Huang, Kai ; Butzhammer, Lorenz ; Rehberg, Ingo |
2013 |
| 1593 |
Tailored benzoxazines as novel resin systems for printed circuit boards in high temperature e-mobility applications |
Tröger, Katlen ; Khanpour Darka, R. ; Neumeyer, Thomas ; Altstädt, Volker |
2014 |
| 1593 |
Foam injection molding of thermoplastic elastomers : Blowing agents, foaming process and characterization of structural foams |
Ries, Stefan ; Spörrer, Andreas N. J. ; Altstädt, Volker |
2014 |
| 1593 |
PP/EPDM-blends by dynamic vulcanization : Influence of increasing peroxide concentration on mechanical, morphological and rheological characteristics |
Patermann, Simone ; Altstädt, Volker |
2014 |
| 1593 |
Surface modification of polypropylene based particle foams |
Schreier, Peter ; Traßl, Christian ; Altstädt, Volker |
2014 |
| 1593 |
Welcome Remarks by the Chairman of "The 29th International Conference of the Polymer Processing Society" |
Altstädt, Volker |
2014 |
| 1593 |
Foam injection moulding of a TPO/TPC-blend and the effect of different nucleating agents on the resulting foam structure |
Müller, Johannes ; Spörrer, Andreas N. J. ; Altstädt, Volker |
2014 |
| 1593 |
Determination of adhesion between thermoplastic and liquid silicone rubbers in hard-soft-combinations via mechanical peeling test |
Kühr, Christin ; Spörrer, Andreas N. J. ; Altstädt, Volker |
2014 |
| 1593 |
Liquid composite molding-processing and characterization of fiber-reinforced composites modified with carbon nanotubes |
Zeiler, Rico ; Khalid, U. ; Kuttner, Christian ; Kothmann, Martin H. ; Dijkstra, D. J. ; Fery, Andreas ; Altstädt, Volker |
2014 |
| 1593 |
Concepts for particle foam based ultralight automotive interior parts |
Traßl, Christian ; Altstädt, Volker ; Schreier, P. |
2014 |
| 1610 |
Analytic model of hopping transport in organic semiconductors including both energetic disorder and polaronic contributions |
Fishchuk, Ivan I. ; Kadashchuk, Andrey ; Hoffmann, Sebastian T. ; Athanasopoulos, Stavros ; Genoe, Jan ; Bässler, Heinz ; Köhler, Anna |
2014 |
| 1664 |
Influence of different crosslinking systems on the mechanical and morphological properties of thermoplastic vulcanizates |
Patermann, Simone ; Altstädt, Volker |
2015 |
| 1779 |
Lignin as renewable raw material for applications in electronics |
Patermann, Simone ; Altstädt, Volker |
2016 |
| 1779 |
Modified standard polylactic acid (PLA) for extrusion foaming |
Göttermann, Svenja ; Weinmann, Sandra ; Bonten, Christian ; Standau, Tobias ; Altstädt, Volker |
2016 |
| 1779 |
Back injection molding of FR4 with heat conductive polymers |
Balzereit, Sandra ; Altstädt, Volker |
2016 |
| 1896 |
Thermoforming of glass fibre reinforced polypropylene : A study on the influence of different process parameters |
Schug, Alexander ; Winkelbauer, Jonas ; Hinterhölzl, Roland ; Drechsler, Klaus |
2017 |
| 1914 |
Welding Quality in Polymer Bead Foams : an in situ SEM Study |
Gensel, Julia ; Pawelski, Christin ; Altstädt, Volker |
2017 |
| 1942 |
An unusual metallic behavior in a Ag4SSe single crystal |
Matteppanavar, Shidaling ; Bui, Nguyen Hai An ; van Smaalen, Sander ; Thamizhavel, Arumugam ; Ramakrishnan, Srinivasan |
2018 |
| 2055 |
Development of a bead foam based on the engineering polymer polybutylene terephthalate |
Standau, Tobias ; Hädelt, Bianca ; Fafara, Michael ; Altstädt, Volker |
2019 |
| 2055 |
Modified polylactide with improved properties for extrusion foaming |
Göttermann, Svenja ; Standau, Tobias ; Altstädt, Volker ; Bonten, Christian |
2019 |
| 2055 |
Influence of low heat conductive inserts on morphology of foam injection molded parts |
Krause, Katharina ; Neumeyer, Thomas ; Baumgart, Christin ; Altstädt, Volker |
2019 |
| 2055 |
Effect of filler type and particle size distribution on thermal properties of bimodal and hybrid : BN/Boehmite-filled EP-Novolac composites |
Pawelski, Christin ; Kang, Enpu ; Bakis, Gökhan ; Altstädt, Volker |
2019 |
| 2205 |
Properties of bead foams with increased heat stability made from the engineering polymer polybutylene terephthalate (E-PBT) |
Standau, Tobias ; Schreiers, Peter ; Hilgert, Kathrin ; Altstädt, Volker |
2020 |
| 2205 |
Effect of the chemical modification on the thermal and rheological properties of different polylactides for foaming |
Murillo Castellón, Svenja ; Standau, Tobias ; Altstädt, Volker ; Bonten, Christian |
2020 |
| 2205 |
Expanded polyamide 12 bead foams (ePA) thermo-mechanical properties of molded parts |
Dörr, Dominik ; Raps, Daniel ; Kirupanantham, Dharan ; Holmes, Chris ; Altstädt, Volker |
2020 |
| 2990 |
In-situ STXM characterization of Cu/Cu₂O electrocatalysts for CO₂ reduction |
Zhang, Chunyang ; Eraky, Haytham ; Ingino, Pablo ; Obst, Martin ; Wang, Jian ; Higgins, Drew ; Hitchcock, Adam P. |
2023 |
