Publications "Ulrich, Anke Silvia"

Article in a journal

Ulrich, Anke Silvia ; Kasatikov, Sergey ; König, Till ; Fantin, Andrea ; Margraf, Johannes T. ; Galetz, Mathias:
Decreased Metal Dusting Resistance of Ni-Cu Alloys by Fe and Mn Additions.
In: High Temperature Corrosion of Materials. (2024) .
ISSN 2731-8400
DOI: https://doi.org/10.1007/s11085-024-10263-w

Beck, Katharina ; Hinrichs, Frauke ; Oskay, Ceyhun ; Ulrich, Anke Silvia ; Heilmaier, Martin ; Galetz, Mathias C.:
Chromium Diffusion Coatings for Mo-Based Silicides to Improve Their Oxidation Resistance.
In: Coatings. Vol. 13 (2023) Issue 10 . - 1712.
ISSN 2079-6412
DOI: https://doi.org/10.3390/coatings13101712

Ulrich, Anke Silvia ; Schlereth, Clara ; Grégoire, Benjamin ; Sutter, Florian ; Oskay, Ceyhun ; Hildebrandt, Christina ; Galetz, Mathias Christian:
Cr–Mn-diffusion coatings on VM12: In situ spinel formation with high solar absorptance for concentrated solar plants.
In: Solar Energy Materials and Solar Cells. Vol. 257 (2023) . - 112382.
ISSN 0927-0248
DOI: https://doi.org/10.1016/j.solmat.2023.112382

Ulrich, Anke Silvia:
Metal Dusting : Aggressive Hochtemperaturkorrosion bei regenerativen Energien.
In: Galvanotechnik. Vol. 114 (2023) Issue 6 . - pp. 683-688.
ISSN 0016-4232

Petry, Nils-Christian ; Bik, Maciej ; Wilk, Łukasz ; Swadźba, Radosław ; Ulrich, Anke Silvia ; Sitarz, Maciej ; Lepple, Maren ; Galetz, Mathias Christian:
Polymer-derived SiAlOC coating to improve the high-temperature resistance of chromium.
In: Surface and Coatings Technology. Vol. 474 (2023) . - 130049.
ISSN 1879-3347
DOI: https://doi.org/10.1016/j.surfcoat.2023.130049

Feng, Bo ; Fetzer, Ann-Katrin ; Ulrich, Anke Silvia ; Galetz, Mathias C. ; Kleebe, Hans-Joachim ; Ionescu, Emanuel:
Monolithic ZrB₂‐based UHTCs using polymer‐derived Si(Zr,B)CN as sintering aid.
In: Journal of the American Ceramic Society. Vol. 105 (2022) Issue 1 . - pp. 99-110.
ISSN 1551-2916
DOI: https://doi.org/10.1111/jace.18038

Hinrichs, Frauke ; Kauffmann, Alexander ; Tirunilai, Aditya Srinivasan ; Schliephake, Daniel ; Beichert, Bonita ; Winkens, Georg ; Beck, Katharina ; Ulrich, Anke Silvia ; Galetz, Mathias C. ; Long, Zhongmin ; Thota, Hemanth ; Eggeler, Yolita ; Pundt, Astrid ; Heilmaier, Martin:
A novel nitridation- and pesting-resistant Cr-Si-Mo alloy.
In: Corrosion Science. Vol. 207 (2022) . - 110566.
ISSN 0010-938X
DOI: https://doi.org/10.1016/j.corsci.2022.110566

Petry, Nils-Christian ; Ulrich, Anke Silvia ; Feng, Bo ; Ionescu, Emanuel ; Galetz, Mathias C. ; Lepple, Maren:
Oxidation resistance of ZrB₂‐based monoliths using polymer‐derived Si(Zr,B)CN as sintering aid.
In: Journal of the American Ceramic Society. Vol. 105 (2022) Issue 8 . - pp. 5380-5394.
ISSN 1551-2916
DOI: https://doi.org/10.1111/jace.18473

Ulrich, Anke Silvia ; Knowles, Alexander J. ; Cantatore, Valentina ; Bhowmik, Ayan ; Wharmby, Michael T. ; Geers, Christine ; Panas, Itai ; Galetz, Mathias C.:
Pt accelerated coarsening of A15 precipitates in Cr-Si alloys.
In: Materials & Design. Vol. 218 (2022) . - 110655.
ISSN 1873-4197
DOI: https://doi.org/10.1016/j.matdes.2022.110655

Galetz, Mathias C. ; Ulrich, Anke Silvia ; Hasemann, G. ; Krüger, M.:
Refractory Metal-Based High Entropy Silicide-Borides: The Future of Materials Beyond MoSiB?
In: Intermetallics. Vol. 148 (2022) . - 107620.
ISSN 0966-9795
DOI: https://doi.org/10.1016/j.intermet.2022.107620

Ulrich, Anke Silvia ; Glatzel, Uwe ; Galetz, Mathias C.:
Discontinuities in Oxidation Kinetics : A New Model and its Application to Cr–Si-Base Alloys.
In: Oxidation of Metals. Vol. 95 (2021) Issue 5 . - pp. 445-465.
ISSN 1573-4889
DOI: https://doi.org/10.1007/s11085-021-10029-8

Jahns, Katrin ; Ulrich, Anke Silvia ; Schlereth, Clara ; Reiff, Lukas ; Krupp, Ulrich ; Galetz, Mathias C.:
The Effect of Cu Content and Surface Finish on the Metal Dusting Resistance of Additively Manufactured NiCu Alloys.
In: Oxidation of Metals. Vol. 96 (2021) Issue 3 . - pp. 241-256.
ISSN 1573-4889
DOI: https://doi.org/10.1007/s11085-021-10037-8

Mengis, Lukas ; Ulrich, Anke Silvia ; Watermeyer, Philipp ; Liebscher, Christian ; Galetz, Mathias C.:
Oxidation behaviour and related microstructural changes of two β₀–phase containing TiAl alloys between 600 °C and 900 °C.
In: Corrosion Science. Vol. 178 (2021) . - 109085.
ISSN 0010-938X
DOI: https://doi.org/10.1016/j.corsci.2020.109085

Pfizenmaier, Petra ; Ulrich, Anke Silvia ; Galetz, Mathias C. ; Glatzel, Uwe:
Tensile creep properties of Cr-Si Alloys at 980 °C in air : Influence of Ge and Mo addition.
In: Metals. Vol. 11 (2021) Issue 7 . - 1072.
ISSN 2075-4701
DOI: https://doi.org/10.3390/met11071072

Pfizenmaier, Petra ; Ulrich, Anke Silvia ; Galetz, Mathias C. ; Glatzel, Uwe:
Determination of heat treatment parameters by experiments and CALPHAD for precipitate hardening of Cr-Alloys with Si, Ge and Mo.
In: Intermetallics. Vol. 116 (2020) . - 106636.
ISSN 0966-9795
DOI: https://doi.org/10.1016/j.intermet.2019.106636

Ulrich, Anke Silvia ; Pfizenmaier, Petra ; Solimani, Ali ; Glatzel, Uwe ; Galetz, Mathias:
Improving the oxidation resistance of Cr-Si-based alloys by ternary alloying.
In: Corrosion Science. Vol. 165 (2020) . - 108376.
ISSN 0010-938X
DOI: https://doi.org/10.1016/j.corsci.2019.108376

Galetz, Mathias C. ; Ulrich, Anke Silvia ; Oskay, Ceyhun ; Fähsing, Diana ; Laska, Nadine ; Schulz, Uwe ; Schütze, Michael:
Oxidation-induced microstructural changes of the TiAl TNM-B1 alloy after exposure at 900 °C in air.
In: Intermetallics. Vol. 123 (2020) . - 106830.
ISSN 0966-9795
DOI: https://doi.org/10.1016/j.intermet.2020.106830

Ulrich, Anke Silvia ; Kaiser, Timo ; Ionescu, Emanuel ; Riedel, Ralf ; Galetz, Mathias C.:
Reactive element effect applied by alloying and SiHfBCN coating on the oxidation of pure chromium.
In: Oxidation of Metals. Vol. 92 (2019) . - pp. 281-302.
ISSN 1573-4889
DOI: https://doi.org/10.1007/s11085-019-09926-w

Ulrich, Anke Silvia ; Laska, N. ; Straubel, A. ; Leyens, C. ; Braun, R. ; Galetz, Mathias C. ; Schütze, M.:
The oxidation behaviour of aluminium-rich coatings on the TiAl alloy TNM-B1.
In: Materials at High Temperatures. Vol. 35 (2018) Issue 1-3 . - pp. 204-216.
ISSN 1878-6413
DOI: https://doi.org/10.1080/09603409.2017.1389097

Ulrich, Anke Silvia ; Pfizenmaier, Petra ; Solimani, Ali ; Glatzel, Uwe ; Galetz, Mathias:
Strengthened Cr-Si-base alloys for high temperature applications.
In: International Journal of Refractory Metals and Hard Materials. Vol. 76 (2018) . - pp. 72-81.
ISSN 0263-4368
DOI: https://doi.org/10.1016/j.ijrmhm.2018.05.016

Ulrich, Anke Silvia ; Galetz, Mathias C.:
Protective aluminide coatings for refractory metals.
In: Oxidation of Metals. Vol. 86 (2016) Issue 5 . - pp. 511-535.
ISSN 1573-4889
DOI: https://doi.org/10.1007/s11085-016-9650-z

Conference item

Li, Bingtao ; Deodeshmukh, Vinay ; Schlereth, Clara ; Ulrich, Anke Silvia ; Galetz, Mathias C.:
Metal Dusting Resistance of N06235 Alloy and its Weld Overlay Under High Pressure Condition.
2022
Event: AMPP Annual Conference + Expo , March 2022 , San Antonio, Texas, USA.
(Conference item: Conference , Paper )

Doctoral thesis

Ulrich, Anke Silvia:
Entwicklung von Ausscheidungshärtbaren Cr-Si-Basis-Legierungen für Hochtemperaturanwendungen : Mikrostruktur und Oxidation.
Düren : Shaker , 2020 . - xii, 116 p. - (Schriftenreihe des DECHEMA-Forschungsinstituts ; 20 )
ISBN 978-3-8440-7322-5
( Doctoral thesis, 2020 , Universität Bayreuth, Fakultät für Ingenieurwissenschaften)