Institutionen der Universität Bayreuth
Forschungsstelle für Additive Innovationen - Campus Additive.Innovationen (CA.I)

Eine Ebene nach oben ...
Exportieren als [RSS feed] RSS 1.0 [RSS2 feed] RSS 2.0
Gruppieren nach: Jahr | Person | Publikationsform
Springe zu: 2023 | 2022 | 2021 | 2020
Anzahl der Einträge auf dieser Ebene: 34.

2023

Orgeldinger, Christian ; Seynstahl, Armin ; Rosnitschek, Tobias ; Ramos-Grez, Jorge ; Marian, Max ; Tremmel, Stephan:
Tribological behavior of additively manufactured 17-4 PH stainless steel : Influence due to the process and post-treatment.
2023
Veranstaltung: 9th International Tribology Conference , 25.09.-30.09.2023 , Fukuoka, Japan.
(Veranstaltungsbeitrag: Kongress/Konferenz/Symposium/Tagung , Vortrag )

Volltext
Mahr, Alexander:
Material efficiency in AM : AM processes only use the material which becomes the part.
In: Mobility goes Additive (Hrsg.): Sustainable AM : Chances and challenges for a green future. - 2023 . - S. 11

Volltext
Bay, Christian ; Groneberg, Hajo ; Hofmann, Andreas ; Mahr, Alexander:
Vier Schritte, um das Potential metallbasierter additiver Fertigung zu kennen.
In: additive : Die Plattform für additive Fertigung.
9 Februar 2023

Bay, Christian ; Baum, Matthias:
Innovative Geschäftsmodelle durch additive Fertigung und ihre Potenziale für den Vertrieb.
In: Binckebanck, Lars ; Elste, Rainer ; Haas, Alexander (Hrsg.): Digitalisierung im Vertrieb : Strategien zum Einsatz neuer Technologien in Vertriebsorganisationen. 2., vollst. überarb. und erw. Auflage. - Wiesbaden : Springer Gabler, 2023 . - S. 583-603
DOI: https://doi.org/10.1007/978-3-658-38433-3_23

Volltext
Rosnitschek, Tobias ; Baumann, Tobias ; Orgeldinger, Christian ; Alber-Laukant, Bettina ; Tremmel, Stephan:
Manufacturing Constraints in Topology Optimization for the Direct Manufacturing of Extrusion-Based Additively Manufactured Parts.
In: Designs. Bd. 7 (2023) Heft 1 . - 8.
DOI: https://doi.org/10.3390/designs7010008

Nagengast, Niko ; Scharl, Tizian ; Frisch, Michael ; Neuber, Christian ; Ruckdäschel, Holger ; Schmidt, Hans-Werner ; Fuss, Franz Konstantin:
Design for Sustainable Additive Manufacturing (DfsAM) : Preperation and Validation of a Transversely Isotropic Simulation Model for FFF Components Made from Virgin and Recycled Polypropylene Filaments.
In: 2023 14th International Conference on Mechanical and Intelligent Manufacturing Technologies (ICMIMT). - Piscataway, NJ : IEEE, 2023 . - S. 204-212
DOI: https://doi.org/10.1109/ICMIMT59138.2023.10199510

Bay, Christian ; Nagengast, Niko ; Schmidt, Hans-Werner ; Döpper, Frank ; Neuber, Christian:
Environmental Assessment of Recycled Petroleum and Bio Based Additively Manufactured Parts via LCA.
In: Kohl, Holger ; Seliger, Günther ; Dietrich, Franz (Hrsg.): Manufacturing Driving Circular Economy : Proceedings. - Cham : Springer, 2023 . - S. 669-677 . - (Lecture Notes in Mechanical Engineering )
DOI: https://doi.org/10.1007/978-3-031-28839-5_75

Saller, Maximilian ; Nagengast, Niko ; Frisch, Michael ; Fuss, Franz Konstantin:
A Review of Biomechanical and Physiological Effects of Using Poles in Sports.
In: Bioengineering. Bd. 10 (2023) Heft 4 . - 497.
DOI: https://doi.org/10.3390/bioengineering10040497

Nagengast, Niko ; Bay, Christian ; Döpper, Frank ; Schmidt, Hans-Werner ; Neuber, Christian:
Thermo-Mechanical Recyclability of Additively Manufactured Polypropylene and Polylactic Acid Parts and Polypropylene Support Structures.
In: Polymers. Bd. 15 (2023) Heft 10 . - 2291.
DOI: https://doi.org/10.3390/polym15102291

2022

Bay, Christian:
Nachhaltigkeit durch interdisziplinäres Mindset.
2022
Veranstaltung: 23. Bayreuther 3D-Konstrukteurstag , 14. September 2022 , Bayreuth.
(Veranstaltungsbeitrag: Kongress/Konferenz/Symposium/Tagung , Vortrag )
DOI: https://doi.org/10.15495/EPub_UBT_00006603

Bay, Christian:
The sustainability triple jump for AM : component, process and value chain.
2022
Veranstaltung: 6th Additive Manufacturing Forum Berlin 2022 , 05.–06.07.2022 , Berlin.
(Veranstaltungsbeitrag: Kongress/Konferenz/Symposium/Tagung , Vortrag )

Volltext
Bay, Christian ; Mahr, Alexander:
Additive Fertigung - Nachhaltig und resilient mit additiven Innovationen.
In: Konstruktionspraxis. (Juni 2022) . - S. 22-23.

Bay, Christian ; Mahr, Alexander ; Hofmann, Andreas ; Wienert, Christian ; Döpper, Frank:
Analysis of the Influence of Build Plate Pre-Treatment and Process Parameters on the Bonding of Additively Manufactured Parts of TiAl₆V₄ to the Build Plate.
In: Muthusamy, Ramya ; Sengodan, Thangaprakash ; Khovaylo, Vladimir ; Liem, Nguyen Quang ; Ohashi, Takahiro (Hrsg.): Advances in Materials and Technologies. - Baech, SZ : Trans Tech Publications Ltd, 2022 . - S. 49-58 . - (Key Engineering Materials ; 934 )
DOI: https://doi.org/10.4028/p-yf8y2m

Rosnitschek, Tobias ; Gläseke, Annika ; Hüter, Florian ; Alber-Laukant, Bettina ; Tremmel, Stephan:
Optimization of Fused Filament Fabricated Infill Patterns for Sandwich Structures in a Three-Point Bending Test.
In: Rieser, Jasper ; Endress, Felix ; Horoschenkoff, Alexander ; Höfer, Philipp ; Dickhut, Tobias ; Zimmermann, Markus (Hrsg.): Proceedings of the Munich Symposium on Lightweight Design 2021 : Tagungsband zum Münchner Leichtbauseminar 2021. - Berlin : Springer Vieweg, 2022 . - S. 115-123
DOI: https://doi.org/10.1007/978-3-662-65216-9_11

Bay, Christian ; Grotz, Tim ; Kleylein-Feuerstein, Joachim ; Schorzmann, Johann:
Qualitätssicherung in der additiven Materialextrusion : Anwenderleitfaden für die Serienfertigung.
Hrsg.: Döpper, Frank . Fraunhofer IPA
Stuttgart : Fraunhofer Verlag , 2022 . - 105 S.

Rosnitschek, Tobias ; Orgeldinger, Christian ; Alber-Laukant, Bettina ; Tremmel, Stephan:
Tribologisches Verhalten additiv gefertigter Bauteile : Perspektiven für die Produktentwicklung durch fertigungsbedingte Effekte erkennen.
In: Universität Duisburg Essen (Hrsg.): Achte IFToMM D-A-CH Konferenz 2022. - Duisburg , 2022
DOI: https://doi.org/10.17185/duepublico/75417

2021

Bay, Christian:
Nachhaltige additive Innovationen durch interdisziplinäres Mindset.
2021
Veranstaltung: 22. Bayreuther 3D-Konstrukteurstag 2021 , 15.09.2021 , digital.
(Veranstaltungsbeitrag: Kongress/Konferenz/Symposium/Tagung , Vortrag )

Bay, Christian:
Wie Sie durch ein interdisziplinäres Mindset nachhaltige additive Innovationen generieren.
2021
Veranstaltung: 5th Additive Manufacturing Forum Digital Edition 2021 , 22.–23. Juli 2021 , Berlin / digital.
(Veranstaltungsbeitrag: Kongress/Konferenz/Symposium/Tagung , Vortrag )

Rosnitschek, Tobias ; Schütt, Thomas Peter ; Alber-Laukant, Bettina:
Analyse der Maßhaltigkeit im Atomic Diffusion Additive Manufacturing für Metallische Bauteile.
In: Eiber, Marion (Hrsg.): 6. Tagung des Arbeitskreises Additiv gefertigte Bauteile und Strukturen. - Berlin : DVM e.V., 2021 . - S. 9-18

Rosnitschek, Tobias ; Kleinschrodt, Claudia ; Tremmel, Stephan ; Rieg, Frank:
Automatisierte Entwicklung bionischer Strukturen für die Additive Fertigung.
In: Jahresmagazin Werkstofftechnik : Ingenieurwissenschaften. (2021) . - S. 50-53.

Volltext
Rosnitschek, Tobias ; Seefeldt, Andressa ; Alber-Laukant, Bettina ; Neumeyer, Thomas ; Altstädt, Volker ; Tremmel, Stephan:
Correlations of Geometry and Infill Degree of Extrusion Additively Manufactured 316L Stainless Steel Components.
In: Materials. Bd. 14 (2021) Heft 18 . - 5173.
DOI: https://doi.org/10.3390/ma14185173

Pezold, Daniel ; Rosnitschek, Tobias ; Kleuderlein, Andre ; Döpper, Frank ; Alber-Laukant, Bettina:
Evaluation of Technologies for the Fabrication of Continuous Fiber Reinforced Thermoplastic Parts by Fused Layer Modeling.
In: Dröder, Klaus ; Vietor, Thomas (Hrsg.): Technologies for economic and functional lightweight design. - Berlin : Springer, 2021 . - S. 125-141 . - (Zukunftstechnologien für den multifunktionalen Leichtbau ; 11 )
DOI: https://doi.org/10.1007/978-3-662-62924-6_11

Volltext
Bay, Christian ; Mahr, Alexander ; Groneberg, Hajo ; Döpper, Frank:
Lean Production to Increase Reproducibility and Work Safety in the Laser Beam Melting Process Chain.
In: International Journal of Industrial and Manufacturing Engineering. Bd. 15 (2021) Heft 6 . - S. 278-283.

Volltext
Rosnitschek, Tobias ; Hentschel, Rick ; Siegel, Tobias ; Kleinschrodt, Claudia ; Zimmermann, Markus ; Alber-Laukant, Bettina ; Rieg, Frank:
Optimized One-Click Development for Topology-Optimized Structures.
In: Applied Sciences. Bd. 11 (2021) Heft 5 . - 2400.
DOI: https://doi.org/10.3390/app11052400

Mahr, Alexander ; Bay, Christian ; Huber, Tobias ; Döpper, Frank:
Systematische Bewertung der materialspezifischen humantoxischen Gefährdungen bei additiven Fertigungsverfahren = Systematic assessment of material-specific human toxic hazards in Additive Manufacturing processes.
In: Kynast, Michael ; Eichmann, Michael ; Witt, Gerd (Hrsg.): Proceedings of the 17th Rapid.Tech 3D Conference Erfurt, Germany, 22–23 June 2021. - München : Hanser, 2021

Hofmann, Andreas ; Mahr, Alexander ; Bay, Christian ; Döpper, Frank:
Verzug bei pulverbettbasiertem Schmelzen von TiAl6V4 : Einflüsse der Bauteilgeometrie und Wärmebehandlung.
In: wt Werkstattstechnik online. Bd. 111 (2021) Heft 6 . - S. 372-377.
DOI: https://doi.org/10.37544/1436-4980-2021-06-16

2020

Volltext
Mohr, Johannes ; Kleinschrodt, Claudia ; Diwisch, Pascal:
Betrachtung von Konfigurationsdateiformaten und GUI-Frameworks für Programme zur Aufbereitung von Austauschdateien.
In: Corves, Burkhard ; Gericke, Kilian ; Grote, Karl-Heinrich ; Lohrengel, Armin ; Löwer, Manuel ; Nagarajah, Arun ; Rieg, Frank ; Scharr, Gerhard ; Stelzer, Ralf (Hrsg.): 18. Gemeinsames Kolloquium Konstruktionstechnik 2020 : Nachhaltige Produktentwicklung ; KT 2020. - Duisburg , 2020 . - S. 309-320
DOI: https://doi.org/10.17185/duepublico/73094

Volltext
Rosnitschek, Tobias ; Siegel, Tobias ; Linke, David ; Mailänder, Philippa ; Kamp, Dominik ; Rieg, Frank:
Optimizing material exploitation in the direct additive manufacturing of topology-optimized structures.
In: Corves, Burkhard ; Gericke, Kilian ; Grote, Karl-Heinrich ; Lohrengel, Armin ; Lower, Manuel ; Nagarajah, Arun ; Rieg, Frank ; Scharr, Gerhard ; Stelzer, Ralf (Hrsg.): 18. Gemeinsames Kolloquium Konstruktionstechnik 2020: Nachhaltige Produktentwicklung ; KT 2020. - Duisburg , 2020 . - S. 27-39
DOI: https://doi.org/10.17185/duepublico/73094

Volltext
Lange, Christopher ; Zahn, Aljoscha ; Rosnitschek, Tobias ; Rieg, Frank:
Using the elimination method for automated dimensioning of interference fits by means of finite element analysis.
In: Corves, Burkhard ; Gericke, Kilian ; Grote, Karl-Heinrich ; Lohrengel, Armin ; Löwer, Manuel ; Nagarajah, Arun ; Rieg, Frank ; Scharr, Gerhard ; Stelzer, Ralf (Hrsg.): 18. Gemeinsames Kolloquium Konstruktionstechnik 2020: Nachhaltige Produktentwicklung ; KT 2020. - Duisburg , 2020 . - S. 41-54
DOI: https://doi.org/10.17185/duepublico/73094

Rosnitschek, Tobias ; Kleinschrodt, Claudia ; Alber-Laukant, Bettina ; Rieg, Frank ; Frisch, Michael:
Digitaler Workflow zur Entwicklung und Simulation optimierter Kinderfußprothesen.
2020
Veranstaltung: DVM-Arbeitskreis "Zuverlässigkeit von Implantaten und Biostrukturen" , 26.11.2020 , TU Berlin, Online.
(Veranstaltungsbeitrag: Kongress/Konferenz/Symposium/Tagung , Vortrag )

Bay, Christian:
Interdisciplinary View of Additive Innovations for a resilient value-added chain.
2020
Veranstaltung: Digital Industry Days Conference: Additive Manufacturing , 27.05.2020 .
(Veranstaltungsbeitrag: Kongress/Konferenz/Symposium/Tagung , Vortrag )

Bay, Christian ; Döpper, Frank:
Innovativ aus der Krise : Interdisziplinäres Zentrum für 3D-Druck.
In: K-Zeitung : Die Zeitung der Kunststoff- und Kautschukundustrie. (22 Mai 2020) Heft 10 .

Bay, Christian ; Döpper, Frank:
Auf dem Weg zur industriellen Reife : Von der Idee über die Kleinserie bis zur AM-Serienfertigung.
In: Maschinenbau : das Schweizer Industrie-Magazin. Bd. 49 (2020) Heft 7 .

Volltext
Bay, Christian:
Mehr Interdisziplinarität wagen.
x-technik IT & Medien GmbH
In: Additive Fertigung. (2020) Heft 3 . - S. 68-69.

Diese Liste wurde am Tue Mar 19 00:38:22 2024 CET generiert.
[Zum Seitenanfang]
URL für die Einbettung dieser Seite in externe WWW-Seiten:
https://eref.uni-bayreuth.de/XML/divisions/320030.xml