ERef Bayreuth
Institutions of the University of Bayreuth
|
 | One level up ... |
- University of Bayreuth (60195)
- Research Institutions (19483)
- Affiliated Institutes (1968)
- Fraunhofer-Projectgroup Processinnovation (85)
- Affiliated Institutes (1968)
- Research Institutions (19483)
Number of items at this level: 85.
Book / Monograph
Böhner, Johannes ; Jahn, Josefine ; Klein, Melanie ; Küfner, Thomas ; Lothes, Gerald ; Reger, Arnim ; Schock, Christoph ; Thorenz, Benjamin ; Uhlemann, Thomas ; Glasschröder, Johannes ; Brugger, Martin ; Chen, Qian ; Ellenrieder, Stephanie ; Gebbe, Christian ; Götz, Georg ; Lutter-Günther, Max ; Müller, Thiemo ; Schmidt, Vanessa ; Schweda, Svenja ; Teufelhart, Stefan ; Unterberger, Eric:
Strategien und Methoden der ressourceneffizienten Produktion : Green Factory Bavaria.
ed.: Reinhart, Gunther ; Steinhilper, Rolf
Stuttgart : Fraunhofer Verlag , 2017 . - 81 p.
Strategien und Methoden der ressourceneffizienten Produktion : Green Factory Bavaria.
ed.: Reinhart, Gunther ; Steinhilper, Rolf
Stuttgart : Fraunhofer Verlag , 2017 . - 81 p.
Schuh, Christian ; Rosemann, Bernd ; Oechsle, Oliver:
Collaborative Process Optimization : An Approach to Individual Packaging Hollows.
Athens : Athens Institute for Education and Research , 2016 . - 11 p.
Collaborative Process Optimization : An Approach to Individual Packaging Hollows.
Athens : Athens Institute for Education and Research , 2016 . - 11 p.
Reinhart, Gunther ; Steinhilper, Rolf ; Böhner, Johannes ; Gebbe, Christian ; Glasschröder, Johannes ; Lothes, Gerald ; Müller, Thiemo ; Simon, Peter ; Unterberger, Eric ; Weeber, Max:
Ressourceneffiziente Fabriken : Innovative Praxisbeispiele und zukünftige Handlungsfelder.
Stuttgart : Fraunhofer Verlag , 2016 . - 95 p.
Ressourceneffiziente Fabriken : Innovative Praxisbeispiele und zukünftige Handlungsfelder.
Stuttgart : Fraunhofer Verlag , 2016 . - 95 p.
Steinhilper, Rolf ; Freiberger, Stefan ; Süchting, Martin ; Kafara, Markus ; Müller, Robert:
Technologie-Roadmap Oberfranken : Management Summary ; Abschlußbericht des Projektes.
Bayreuth : Universität , 2015 . - 205 p.
Technologie-Roadmap Oberfranken : Management Summary ; Abschlußbericht des Projektes.
Bayreuth : Universität , 2015 . - 205 p.
Steinhilper, Rolf ; Köhler, Daniel C. F. ; Oechsle, Oliver:
Wertschöpfende Produktionslogistik : Status Quo, Trends und Handlungsansätze zur Gestaltung der Produktionslogistik in KMU.
Fraunhofer-Projektgruppe Prozessinnovation Bayreuth
Stuttgart : Fraunhofer-Verl. , 2011 . - 183 p.
Wertschöpfende Produktionslogistik : Status Quo, Trends und Handlungsansätze zur Gestaltung der Produktionslogistik in KMU.
Fraunhofer-Projektgruppe Prozessinnovation Bayreuth
Stuttgart : Fraunhofer-Verl. , 2011 . - 183 p.
Article in a journal
Mahr, Alexander ; Schütt, Thomas Peter ; Rosnitschek, Tobias ; Tremmel, Stephan ; Döpper, Frank:
Evaluation of Powder- and Extrusion-Based Metal Additive Manufacturing Processes for the Sustainable Fabrication of Spare Parts in Electromobility.
In: Sustainability. Vol. 16 (2024) Issue 8 . - 3425.
DOI: https://doi.org/10.3390/su16083425
Evaluation of Powder- and Extrusion-Based Metal Additive Manufacturing Processes for the Sustainable Fabrication of Spare Parts in Electromobility.
In: Sustainability. Vol. 16 (2024) Issue 8 . - 3425.
DOI: https://doi.org/10.3390/su16083425
Pezold, Daniel ; Schorzmann, Johann ; Waldmüller, Paula ; Kemnitzer, Jan Felix ; Döpper, Frank:
Systematic evaluation of the part properties through combination of different greyscales in one part in High Speed Sintering.
In: Procedia CIRP. Vol. 118 (2023) . - pp. 729-734.
DOI: https://doi.org/10.1016/j.procir.2023.06.125
Systematic evaluation of the part properties through combination of different greyscales in one part in High Speed Sintering.
In: Procedia CIRP. Vol. 118 (2023) . - pp. 729-734.
DOI: https://doi.org/10.1016/j.procir.2023.06.125
Schorzmann, Johann ; Pezold, Daniel ; Kemnitzer, Jan Felix ; Kalusche, Alexander:
Hybridprozess aus Spritzguss und additiver Fertigung.
In: Maschinenbau : Die Deutschland-Ausgabe des Schweizer Industriemagazins. Vol. 2 (2022) Issue 1 . - pp. 30-33.
DOI: https://doi.org/10.1007/s44029-021-0113-1
Hybridprozess aus Spritzguss und additiver Fertigung.
In: Maschinenbau : Die Deutschland-Ausgabe des Schweizer Industriemagazins. Vol. 2 (2022) Issue 1 . - pp. 30-33.
DOI: https://doi.org/10.1007/s44029-021-0113-1
Mahr, Alexander ; Hofmann, Andreas:
Nachbearbeitungsverfahren in der additiven Fertigung : Mikrostrahlen, Plasmapolieren oder Gleitschleifen?
In: MAV : Innovation in der spanenden Fertigung. (July 2021) Issue 6 .
Nachbearbeitungsverfahren in der additiven Fertigung : Mikrostrahlen, Plasmapolieren oder Gleitschleifen?
In: MAV : Innovation in der spanenden Fertigung. (July 2021) Issue 6 .
Pezold, Daniel ; Kemnitzer, Jan:
Additive Fertigung wasserlöslicher Formkerne für die CFK-Bauteilproduktion.
In: Maschinenbau : Die Deutschland-Ausgabe des Schweizer Industriemagazins. Vol. 1 (2021) Issue 2 . - pp. 32-35.
DOI: https://doi.org/10.1007/s44029-021-0023-2
Additive Fertigung wasserlöslicher Formkerne für die CFK-Bauteilproduktion.
In: Maschinenbau : Die Deutschland-Ausgabe des Schweizer Industriemagazins. Vol. 1 (2021) Issue 2 . - pp. 32-35.
DOI: https://doi.org/10.1007/s44029-021-0023-2
Schock, Christoph ; Dumler, Jonas ; Döpper, Frank:
Data Acquisition and Preparation - Enabling Data Analytics Projects within Production.
In: Procedia CIRP. Vol. 104 (2021) . - pp. 636-640.
DOI: https://doi.org/10.15495/EPub_UBT_00005915
Data Acquisition and Preparation - Enabling Data Analytics Projects within Production.
In: Procedia CIRP. Vol. 104 (2021) . - pp. 636-640.
DOI: https://doi.org/10.15495/EPub_UBT_00005915
Schreiner, Florian ; Thorenz, Benjamin ; Schmidt, Julian ; Friedrich, Markus ; Döpper, Frank:
Development of a Measuring and Control Unit for an Intelligent Adjustment of Process Parameters in Sawing.
In: MM Science Journal. (2021) Issue 5 . - pp. 5203-5210.
DOI: https://doi.org/10.17973/MMSJ.2021_11_2021166
Development of a Measuring and Control Unit for an Intelligent Adjustment of Process Parameters in Sawing.
In: MM Science Journal. (2021) Issue 5 . - pp. 5203-5210.
DOI: https://doi.org/10.17973/MMSJ.2021_11_2021166
Groneberg, Hajo ; Koller, Jan ; Mahr, Alexander ; Döpper, Frank:
Development of a systematic approach to identify non-value-adding operations in the LBM process chain.
In: Procedia CIRP. Vol. 104 (2021) . - pp. 1613-1618.
DOI: https://doi.org/10.1016/j.procir.2021.11.272
Development of a systematic approach to identify non-value-adding operations in the LBM process chain.
In: Procedia CIRP. Vol. 104 (2021) . - pp. 1613-1618.
DOI: https://doi.org/10.1016/j.procir.2021.11.272
Kemnitzer, Jan Felix ; Tarasova, Anna ; Pezold, Daniel:
Fertigung funktional gradierter Bauteile im High Speed Sintering.
In: Maschinenbau : Die Deutschland-Ausgabe des Schweizer Industriemagazins. Vol. 1 (2021) Issue 4 . - pp. 8-11.
DOI: https://doi.org/10.1007/s44029-021-0066-4
Fertigung funktional gradierter Bauteile im High Speed Sintering.
In: Maschinenbau : Die Deutschland-Ausgabe des Schweizer Industriemagazins. Vol. 1 (2021) Issue 4 . - pp. 8-11.
DOI: https://doi.org/10.1007/s44029-021-0066-4
Mahr, Alexander ; Hofmann, Andreas:
Nachbearbeitungsverfahren in der additiven Fertigung : Mikrostrahlen, Plasmapolieren oder Gleitschleifen?
In: additive : Das Magazin für generative Fertigung. (2021) Issue 2 . - pp. 14-16.
Nachbearbeitungsverfahren in der additiven Fertigung : Mikrostrahlen, Plasmapolieren oder Gleitschleifen?
In: additive : Das Magazin für generative Fertigung. (2021) Issue 2 . - pp. 14-16.
Hofmann, Andreas ; Mahr, Alexander ; Bay, Christian ; Döpper, Frank:
Verzug bei pulverbettbasiertem Schmelzen von TiAl6V4 : Einflüsse der Bauteilgeometrie und Wärmebehandlung.
In: wt Werkstattstechnik online. Vol. 111 (2021) Issue 6 . - pp. 372-377.
DOI: https://doi.org/10.37544/1436-4980-2021-06-16
Verzug bei pulverbettbasiertem Schmelzen von TiAl6V4 : Einflüsse der Bauteilgeometrie und Wärmebehandlung.
In: wt Werkstattstechnik online. Vol. 111 (2021) Issue 6 . - pp. 372-377.
DOI: https://doi.org/10.37544/1436-4980-2021-06-16
Mahr, Alexander ; Bay, Christian:
Nachbearbeitung beim additiven Fertigungsverfahren Laserstrahlschmelzen : Herausforderungen und Optimierungspotential.
In: Werkstoffe in der Fertigung. (2020) Issue 5 . - pp. 29-31.
Nachbearbeitung beim additiven Fertigungsverfahren Laserstrahlschmelzen : Herausforderungen und Optimierungspotential.
In: Werkstoffe in der Fertigung. (2020) Issue 5 . - pp. 29-31.
Mahr, Alexander ; Bay, Christian:
Arbeitssicherheit für die additive Fertigung : Art der Gefährdungen ist stark verfahrensabhängig.
In: Automationspraxis. (2019) Issue 12 . - pp. 58-59.
Arbeitssicherheit für die additive Fertigung : Art der Gefährdungen ist stark verfahrensabhängig.
In: Automationspraxis. (2019) Issue 12 . - pp. 58-59.
Mahr, Alexander ; Bay, Christian:
Arbeitssicherheit in der additiven Fertigung : Gefährdungen und Handlungsempfehlungen.
In: additive : Das Magazin für generative Fertigung. (2019) Issue 4 . - pp. 54-55.
Arbeitssicherheit in der additiven Fertigung : Gefährdungen und Handlungsempfehlungen.
In: additive : Das Magazin für generative Fertigung. (2019) Issue 4 . - pp. 54-55.
Klein, Melanie ; Finsterwald, Leonhard ; Tonhäuser, Kathrin ; Steinhilper, Rolf:
Measurement Analysis for Increasing Resource Efficiency during Autoclave Processes for the Production of Fiber Composites.
In: Applied Mechanics and Materials. Vol. 882 (2018) . - pp. 154-161.
DOI: https://doi.org/10.4028/www.scientific.net/AMM.882.154
Measurement Analysis for Increasing Resource Efficiency during Autoclave Processes for the Production of Fiber Composites.
In: Applied Mechanics and Materials. Vol. 882 (2018) . - pp. 154-161.
DOI: https://doi.org/10.4028/www.scientific.net/AMM.882.154
Jahn, Josefine ; Thorenz, Benjamin ; Kafara, Markus ; Steinhilper, Rolf:
Combining Optical Metrology and Additive Manufacturing for Efficient Manufacturing of Carbon Fiber Reinforced Plastic Orthopedics : A Case Study.
In: Applied Mechanics and Materials. Vol. 871 (2017) . - pp. 275-283.
DOI: https://doi.org/10.4028/www.scientific.net/AMM.871.275
Combining Optical Metrology and Additive Manufacturing for Efficient Manufacturing of Carbon Fiber Reinforced Plastic Orthopedics : A Case Study.
In: Applied Mechanics and Materials. Vol. 871 (2017) . - pp. 275-283.
DOI: https://doi.org/10.4028/www.scientific.net/AMM.871.275
Jahn, Josefine ; Kastl, Johannes ; Klein, Melanie ; Steinhilper, Rolf:
Resource Efficiency Assessment of Alternative Composite Curing Processes.
In: Applied Mechanics and Materials. Vol. 871 (2017) . - pp. 267-274.
DOI: https://doi.org/10.4028/www.scientific.net/AMM.871.267
Resource Efficiency Assessment of Alternative Composite Curing Processes.
In: Applied Mechanics and Materials. Vol. 871 (2017) . - pp. 267-274.
DOI: https://doi.org/10.4028/www.scientific.net/AMM.871.267
Scholz, Michael ; Kreitlein, Sven ; Lehmann, Christian ; Böhner, Johannes ; Franke, Jörg ; Steinhilper, Rolf:
Integrating Intralogistics into Resource Efficiency Oriented Learning Factories.
In: Procedia CIRP. Vol. 54 (2016) . - pp. 239-244.
DOI: https://doi.org/10.1016/j.procir.2016.05.067
Integrating Intralogistics into Resource Efficiency Oriented Learning Factories.
In: Procedia CIRP. Vol. 54 (2016) . - pp. 239-244.
DOI: https://doi.org/10.1016/j.procir.2016.05.067
Klein, Melanie ; Thorenz, Benjamin ; Lehmann, Christian ; Böhner, Johannes ; Steinhilper, Rolf:
Integrating New Technologies and Materials by Reengineering : Selected Case Study Results.
In: Procedia CIRP. Vol. 50 (2016) . - pp. 147-152.
DOI: https://doi.org/10.1016/j.procir.2016.05.009
Integrating New Technologies and Materials by Reengineering : Selected Case Study Results.
In: Procedia CIRP. Vol. 50 (2016) . - pp. 147-152.
DOI: https://doi.org/10.1016/j.procir.2016.05.009
Lehmann, Christian ; Weeber, Max ; Böhner, Johannes ; Steinhilper, Rolf:
Techno-economical Analysis of Photovoltaic-battery Storage Systems for Peak-shaving Applications and Self-consumption Optimization in Existing Production Plants.
In: Procedia CIRP. Vol. 48 (2016) . - pp. 313-318.
DOI: https://doi.org/10.1016/j.procir.2016.03.017
Techno-economical Analysis of Photovoltaic-battery Storage Systems for Peak-shaving Applications and Self-consumption Optimization in Existing Production Plants.
In: Procedia CIRP. Vol. 48 (2016) . - pp. 313-318.
DOI: https://doi.org/10.1016/j.procir.2016.03.017
Westermann, Hans-Henrik ; Kafara, Markus ; Steinhilper, Rolf:
Development of a Reference Part for the Evaluation of Energy Efficiency in Milling Operations.
In: Procedia CIRP. Vol. 26 (2015) . - pp. 521-526.
DOI: https://doi.org/10.1016/j.procir.2014.07.104
Development of a Reference Part for the Evaluation of Energy Efficiency in Milling Operations.
In: Procedia CIRP. Vol. 26 (2015) . - pp. 521-526.
DOI: https://doi.org/10.1016/j.procir.2014.07.104
Kübler, Frank ; Uhlemann, Thomas ; Steinhilper, Rolf ; Dill, Justus:
Energy Efficiency and Productivity Optimization of Industrial Cleaning Equipment.
In: Applied Mechanics and Materials. Vol. 805 (2015) . - pp. 265-272.
DOI: https://doi.org/10.4028/www.scientific.net/AMM.805.265
Energy Efficiency and Productivity Optimization of Industrial Cleaning Equipment.
In: Applied Mechanics and Materials. Vol. 805 (2015) . - pp. 265-272.
DOI: https://doi.org/10.4028/www.scientific.net/AMM.805.265
Flores, Octavio ; Bordia, Rajendra K. ; Bernard, Thilo ; Uhlemann, Thomas ; Krenkel, Walter ; Motz, Günter:
Processing and characterization of large diameter ceramic SiCN monofilaments from commercial oligosilazanes.
In: RSC Advances. Vol. 129 (2015) Issue 5 . - pp. 107001-107011.
DOI: https://doi.org/10.1039/C5RA17300K
Processing and characterization of large diameter ceramic SiCN monofilaments from commercial oligosilazanes.
In: RSC Advances. Vol. 129 (2015) Issue 5 . - pp. 107001-107011.
DOI: https://doi.org/10.1039/C5RA17300K
Kübler, Frank ; Böhner, Johannes ; Steinhilper, Rolf:
Resource efficiency optimization of manufacturing processes using evolutionary computation : a turning case.
In: Procedia CIRP. Vol. 29 (2015) . - pp. 822-827.
DOI: https://doi.org/10.1016/j.procir.2015.02.208
Resource efficiency optimization of manufacturing processes using evolutionary computation : a turning case.
In: Procedia CIRP. Vol. 29 (2015) . - pp. 822-827.
DOI: https://doi.org/10.1016/j.procir.2015.02.208
Kruse, Andreas ; Butzer, Steffen ; Drews, Tom ; Steinhilper, Rolf:
A Simulation-based Framework for Improving the Ecological and Economic Transparency in Multi-variant Production.
In: Procedia CIRP. Vol. 26 (2015) . - pp. 179-184.
DOI: https://doi.org/10.1016/j.procir.2014.07.101
A Simulation-based Framework for Improving the Ecological and Economic Transparency in Multi-variant Production.
In: Procedia CIRP. Vol. 26 (2015) . - pp. 179-184.
DOI: https://doi.org/10.1016/j.procir.2014.07.101
Böhner, Johannes ; Hamacher, Moritz ; Reger, Arnim ; Steinhilper, Rolf:
Derivation of Measures for Energy Efficient Machine Design by Evaluating Energy Consumption Data.
In: Procedia CIRP. Vol. 15 (2014) . - pp. 437-442.
DOI: https://doi.org/10.1016/j.procir.2014.06.062
Derivation of Measures for Energy Efficient Machine Design by Evaluating Energy Consumption Data.
In: Procedia CIRP. Vol. 15 (2014) . - pp. 437-442.
DOI: https://doi.org/10.1016/j.procir.2014.06.062
Hamacher, Moritz ; Böhner, Johannes ; Reger, Arnim:
Identifying energy efficiency potentials by applying flexible measuring systems.
In: Applied Mechanics and Materials. Vol. 655 (2014) . - pp. 47-52.
DOI: https://doi.org/10.4028/www.scientific.net/AMM.655.47
Identifying energy efficiency potentials by applying flexible measuring systems.
In: Applied Mechanics and Materials. Vol. 655 (2014) . - pp. 47-52.
DOI: https://doi.org/10.4028/www.scientific.net/AMM.655.47
Golinska, Paulina ; Kübler, Frank:
The method for assessment of the sustainability maturity in remanufacturing companies.
In: Procedia CIRP. Vol. 15 (2014) . - pp. 201-206.
DOI: https://doi.org/10.1016/j.procir.2014.06.018
The method for assessment of the sustainability maturity in remanufacturing companies.
In: Procedia CIRP. Vol. 15 (2014) . - pp. 201-206.
DOI: https://doi.org/10.1016/j.procir.2014.06.018
Böhner, Johannes ; Hamacher, Moritz ; Reger, Arnim:
Methodology to Increase Energy Efficiency in Discrete Manufacturing.
In: Applied Mechanics and Materials. Vol. 655 (2014) . - pp. 69-74.
DOI: https://doi.org/10.4028/www.scientific.net/AMM.655.69
Methodology to Increase Energy Efficiency in Discrete Manufacturing.
In: Applied Mechanics and Materials. Vol. 655 (2014) . - pp. 69-74.
DOI: https://doi.org/10.4028/www.scientific.net/AMM.655.69
Steinhilper, Rolf ; Süchting, Martin ; Westermann, Hans-Henrik:
Mit optischer Messtechnik zum Carbon Footprint : Mit Streifenlichtprojektionsverfahren effizient und detailliert den Carbon Footprint von Metallbauteilen erstellen.
In: Zeitschrift für wirtschaftlichen Fabrikbetrieb. Vol. 109 (2014) Issue 1-2 . - pp. 59-63.
Mit optischer Messtechnik zum Carbon Footprint : Mit Streifenlichtprojektionsverfahren effizient und detailliert den Carbon Footprint von Metallbauteilen erstellen.
In: Zeitschrift für wirtschaftlichen Fabrikbetrieb. Vol. 109 (2014) Issue 1-2 . - pp. 59-63.
Steinhilper, Rolf ; Nix, Mark Andre ; Süchting, Martin ; Meier, Jürgen:
Motivierte Prozessoptimierung : Eine Methode moderner Kommunikations- und Visualisierungstechnik zur Realisierung effizienter Prozess.
In: Zeitschrift für wirtschaftlichen Fabrikbetrieb. Vol. 104 (2014) Issue 1-2 . - pp. 34-37.
Motivierte Prozessoptimierung : Eine Methode moderner Kommunikations- und Visualisierungstechnik zur Realisierung effizienter Prozess.
In: Zeitschrift für wirtschaftlichen Fabrikbetrieb. Vol. 104 (2014) Issue 1-2 . - pp. 34-37.
Steinhilper, Rolf ; Freiberger, Stefan ; Kübler, Frank:
Refabrikation in der Pumpen- und Kompressorindustrie Remanufacturing in the pump and compressor industry.
In: Pumpen, Kompressoren und prozesstechnische Komponenten für die Zielmärkte. (2013) . - pp. 4-7.
Refabrikation in der Pumpen- und Kompressorindustrie Remanufacturing in the pump and compressor industry.
In: Pumpen, Kompressoren und prozesstechnische Komponenten für die Zielmärkte. (2013) . - pp. 4-7.
Silva Vieira, Abel ; Weeber, Max ; Ghisi, Enedir:
Self-cleaning filtration : a novel concept for rainwater harvesting systems.
In: Resources, Conservation & Recycling. Vol. 78 (2013) . - pp. 67-73.
DOI: https://doi.org/10.1016/j.resconrec.2013.06.008
Self-cleaning filtration : a novel concept for rainwater harvesting systems.
In: Resources, Conservation & Recycling. Vol. 78 (2013) . - pp. 67-73.
DOI: https://doi.org/10.1016/j.resconrec.2013.06.008
Steinhilper, Rolf ; Süchting, Martin ; Kafara, Markus:
Total Cost and Environmental Impact of Ownership : TCEIO.
In: Zeitschrift für wirtschaftlichen Fabrikbetrieb. (2013) Issue 01-02 . - pp. 63-67.
Total Cost and Environmental Impact of Ownership : TCEIO.
In: Zeitschrift für wirtschaftlichen Fabrikbetrieb. (2013) Issue 01-02 . - pp. 63-67.
Freiberger, Stefan ; Böhner, Johannes ; Kreitlein, Sven ; Steinhilper, Rolf ; Franke, Jörg:
Green Factory Bavaria : Methodenentwicklung und Wissenstransfer zur Energieeffizienzsteigerung.
In: Elektrotechnik. (November 2012) .
Green Factory Bavaria : Methodenentwicklung und Wissenstransfer zur Energieeffizienzsteigerung.
In: Elektrotechnik. (November 2012) .
Karl, Florian ; Schnellbach, Peter ; Reinhart, Gunther ; Böhner, Johannes ; Freiberger, Stefan ; Steinhilper, Rolf ; Kreitlein, Sven ; Franke, Jörg ; Maier, Tobias ; Pohl, Johannes ; Zäh, Michael F.:
Green Factory Bavaria : Demonstrations-, Lehr-und Forschungsplattform zur Erhöhung der Energieeffizienz.
In: wt Werkstattstechnik online. Vol. 102 (2012) Issue 9 . - pp. 629-632.
Green Factory Bavaria : Demonstrations-, Lehr-und Forschungsplattform zur Erhöhung der Energieeffizienz.
In: wt Werkstattstechnik online. Vol. 102 (2012) Issue 9 . - pp. 629-632.
Steinhilper, Rolf ; Westermann, Hans-Henrik ; Butzer, Steffen ; Haumann, Michael ; Seifert, Sandra:
Komplexität messbar machen : Eine Methode zur Quantifizierung von Komplexitätstreibern und -wirkungen am Beispiel der Refabrikation.
In: Zeitschrift für wirtschaftlichen Fabrikbetrieb. Vol. 107 (2012) Issue 5 . - pp. 360-365.
Komplexität messbar machen : Eine Methode zur Quantifizierung von Komplexitätstreibern und -wirkungen am Beispiel der Refabrikation.
In: Zeitschrift für wirtschaftlichen Fabrikbetrieb. Vol. 107 (2012) Issue 5 . - pp. 360-365.
Freiberger, Stefan ; Böhner, Johannes ; Ellert, Florian:
Entwicklung eines konfektionierbaren CFK-Fahrradrahmens.
In: Lightweight Design. Vol. 4 (2011) . - pp. 33-37.
DOI: https://doi.org/10.1365/s35725-011-0064-1
Entwicklung eines konfektionierbaren CFK-Fahrradrahmens.
In: Lightweight Design. Vol. 4 (2011) . - pp. 33-37.
DOI: https://doi.org/10.1365/s35725-011-0064-1
Freiberger, Stefan ; Albrecht, Matthias ; Käufl, Josef:
Reverse engineering technologies for remanufacturing of automotive systems communicating via CAN bus.
In: Journal of Remanufacturing. Vol. 1 (2011) . - 6.
DOI: https://doi.org/10.1186/2210-4690-1-6
Reverse engineering technologies for remanufacturing of automotive systems communicating via CAN bus.
In: Journal of Remanufacturing. Vol. 1 (2011) . - 6.
DOI: https://doi.org/10.1186/2210-4690-1-6
Landenberger, Daniel ; Steinhilper, Rolf ; Rosemann, Bernd:
Verbesserung der Oberflächengüte durch Bürstspanen.
In: VDI-Z integrierte Produktion. Vol. 149 (2007) Issue 3 . - pp. 67-69.
Verbesserung der Oberflächengüte durch Bürstspanen.
In: VDI-Z integrierte Produktion. Vol. 149 (2007) Issue 3 . - pp. 67-69.
Rosemann, Bernd ; Brüning, Ralf ; Enderle, Bettina:
Was tun mit ausgedienter Elektronik? Teil 2 : Werterhaltung statt Wertverfall.
In: Mechatronik : Design, Entwicklung, Integration. (2007) Issue 6 . - pp. 14-16.
Was tun mit ausgedienter Elektronik? Teil 2 : Werterhaltung statt Wertverfall.
In: Mechatronik : Design, Entwicklung, Integration. (2007) Issue 6 . - pp. 14-16.
Freiberger, Stefan ; Landenberger, Daniel ; Wrobel, Stefanie:
FMEA in der Refabrikationsindustrie : Erfassen, bewerten, vermeiden.
In: Quality Engineering : Kontrolle. (2006) Issue 4 .
FMEA in der Refabrikationsindustrie : Erfassen, bewerten, vermeiden.
In: Quality Engineering : Kontrolle. (2006) Issue 4 .
Freiberger, Stefan ; Steinhilper, Rolf ; Stöber, Ralf ; Fischerauer, Gerhard:
How to remanufacture partially documented mechatronic systems.
In: ReMaTec News. Vol. 6 (2006) Issue 4 . - pp. 17-20.
How to remanufacture partially documented mechatronic systems.
In: ReMaTec News. Vol. 6 (2006) Issue 4 . - pp. 17-20.
Steinhilper, Rolf ; Freiberger, Stefan:
Kfz-Ersatzteilversorgung durch Austauschteileproduktion (Remanufacturing) von mechatronischen Baugruppen spart Rohstoffe und Energie.
In: UmweltWirtschaftsForum. Vol. 14 (2006) Issue 4 . - pp. 25-30.
Kfz-Ersatzteilversorgung durch Austauschteileproduktion (Remanufacturing) von mechatronischen Baugruppen spart Rohstoffe und Energie.
In: UmweltWirtschaftsForum. Vol. 14 (2006) Issue 4 . - pp. 25-30.
Haumann, Michael ; Rosemann, Bernd ; von Bachmann, Heiko:
Mit Produktkreisläufen zu einem nachhaltigen Verpackungsprozess.
In: Müll und Abfall. (2006) Issue 12 . - pp. 629-630.
Mit Produktkreisläufen zu einem nachhaltigen Verpackungsprozess.
In: Müll und Abfall. (2006) Issue 12 . - pp. 629-630.
Article in a book
Schreiner, Florian ; Beller, Marie ; Pohle, Joshua ; Thorenz, Benjamin ; Döpper, Frank:
Life Cycle Assessment (LCA) of a Circular Saw Blade for Wood Processing.
In: Sustainable Manufacturing as a Driver for Growth. - Cham : Springer, 2025 . - pp. 155-164 . - (Lecture Notes in Mechanical Engineering )
DOI: https://doi.org/10.1007/978-3-031-77429-4_18
Life Cycle Assessment (LCA) of a Circular Saw Blade for Wood Processing.
In: Sustainable Manufacturing as a Driver for Growth. - Cham : Springer, 2025 . - pp. 155-164 . - (Lecture Notes in Mechanical Engineering )
DOI: https://doi.org/10.1007/978-3-031-77429-4_18
Schmidt, Julian ; Thorenz, Benjamin ; Döpper, Frank:
Trends and Resource-Efficient Application of Solid End Mills in Plastics Machining : A Comparative Market Study.
In: Sustainable Manufacturing as a Driver for Growth. - Cham : Springer, 2025 . - pp. 676-683 . - (Lecture Notes in Mechanical Engineering )
DOI: https://doi.org/10.1007/978-3-031-77429-4_75
Trends and Resource-Efficient Application of Solid End Mills in Plastics Machining : A Comparative Market Study.
In: Sustainable Manufacturing as a Driver for Growth. - Cham : Springer, 2025 . - pp. 676-683 . - (Lecture Notes in Mechanical Engineering )
DOI: https://doi.org/10.1007/978-3-031-77429-4_75
Mahr, Alexander ; Bay, Christian ; Huber, Tobias ; Döpper, Frank:
Systematische Bewertung der materialspezifischen humantoxischen Gefährdungen bei additiven Fertigungsverfahren = Systematic assessment of material-specific human toxic hazards in Additive Manufacturing processes.
In: Kynast, Michael ; Eichmann, Michael ; Witt, Gerd (ed.): Proceedings of the 17th Rapid.Tech 3D Conference Erfurt, Germany, 22–23 June 2021. - München : Hanser, 2021
Systematische Bewertung der materialspezifischen humantoxischen Gefährdungen bei additiven Fertigungsverfahren = Systematic assessment of material-specific human toxic hazards in Additive Manufacturing processes.
In: Kynast, Michael ; Eichmann, Michael ; Witt, Gerd (ed.): Proceedings of the 17th Rapid.Tech 3D Conference Erfurt, Germany, 22–23 June 2021. - München : Hanser, 2021
Lehmann, Christian:
Simulative Optimierung der Energieeffizienz von Fabrikinfrastruktur.
In: Franke, Jörg ; Kreitlein, Sven (ed.): Tagungsband zum 3. Green Factory Bavaria Kolloquium 2016 Energieeffiziente Produktion. - Erlangen , 2016 . - pp. 25-43
Simulative Optimierung der Energieeffizienz von Fabrikinfrastruktur.
In: Franke, Jörg ; Kreitlein, Sven (ed.): Tagungsband zum 3. Green Factory Bavaria Kolloquium 2016 Energieeffiziente Produktion. - Erlangen , 2016 . - pp. 25-43
Kübler, Frank ; Hamacher, Moritz ; Steinhilper, Rolf ; Golinska, Paulina:
Resource Efficiency and Productivity Optimization of Manufacturing Equipment.
In: Fernandez, Jeffrey E. (ed.): 2nd Annual World Conference of the Society for Industrial and Systems Engineering (SISE 2013). - Red Hook, NY : Curran Associates, Inc., 2016 . - pp. 392-397
Resource Efficiency and Productivity Optimization of Manufacturing Equipment.
In: Fernandez, Jeffrey E. (ed.): 2nd Annual World Conference of the Society for Industrial and Systems Engineering (SISE 2013). - Red Hook, NY : Curran Associates, Inc., 2016 . - pp. 392-397
Klein, Melanie ; Steinhilper, Rolf:
Ressourceneffizienzsteigerung durch Materialsubstitution mit CFK.
In: Franke, Jörg ; Kreitlein, Sven (ed.): Tagungsband zum 3. Green Factory Bavaria Kolloquium 2016 Energieeffiziente Produktion. - Erlangen , 2016 . - pp. 453-462
Ressourceneffizienzsteigerung durch Materialsubstitution mit CFK.
In: Franke, Jörg ; Kreitlein, Sven (ed.): Tagungsband zum 3. Green Factory Bavaria Kolloquium 2016 Energieeffiziente Produktion. - Erlangen , 2016 . - pp. 453-462
Reger, Arnim ; Hamacher, Moritz ; Böhner, Johannes ; Kestler, Tobias ; Steinhilper, Rolf:
Analyzing the active power of variable frequency drives in manufacturing plants.
In: 4th International Electric Drives Production Conference (EDPC 2014). - Piscataway, NJ : IEEE, 2014 . - pp. 1-8
DOI: https://doi.org/10.1109/EDPC.2014.6984380
Analyzing the active power of variable frequency drives in manufacturing plants.
In: 4th International Electric Drives Production Conference (EDPC 2014). - Piscataway, NJ : IEEE, 2014 . - pp. 1-8
DOI: https://doi.org/10.1109/EDPC.2014.6984380
Freiberger, Stefan ; Weeber, Max ; Ellert, Florian:
Energy Efficient Manufacturing of Lightweight Products Illustrated by a Structural Optimization of an Automatic Knife Cutting System.
In: Franke, Jörg (ed.): Green Factory Bavaria Colloquium 2014 : selected, peer reviewed papers. - Pfaffikon : Trans Tech Publ., 2014 . - pp. 75-81 . - (Applied Mechanics and Materials ; 655 )
DOI: https://doi.org/10.4028/www.scientific.net/AMM.655.75
Energy Efficient Manufacturing of Lightweight Products Illustrated by a Structural Optimization of an Automatic Knife Cutting System.
In: Franke, Jörg (ed.): Green Factory Bavaria Colloquium 2014 : selected, peer reviewed papers. - Pfaffikon : Trans Tech Publ., 2014 . - pp. 75-81 . - (Applied Mechanics and Materials ; 655 )
DOI: https://doi.org/10.4028/www.scientific.net/AMM.655.75
Butzer, Steffen ; Schötz, Sebastian ; Kruse, Andreas ; Steinhilper, Rolf:
Managing Complexity in Remanufacturing Focusing on Production Organisation.
In: Zäh, Michael F. (ed.): Enabling Manufacturing Competitiveness and Economic Sustainability : Proceedings. - Cham : Springer, 2014 . - pp. 365-370
DOI: https://doi.org/10.1007/978-3-319-02054-9_62
Managing Complexity in Remanufacturing Focusing on Production Organisation.
In: Zäh, Michael F. (ed.): Enabling Manufacturing Competitiveness and Economic Sustainability : Proceedings. - Cham : Springer, 2014 . - pp. 365-370
DOI: https://doi.org/10.1007/978-3-319-02054-9_62
Böhner, Johannes ; Kübler, Frank ; Steinhilper, Rolf:
Assessment of Energy Saving Potentials in Manufacturing Operations.
In: Challenges for sustainable operations : planning, implementing and managing reverse networks. - Foz do Iguaçu , 2013
Assessment of Energy Saving Potentials in Manufacturing Operations.
In: Challenges for sustainable operations : planning, implementing and managing reverse networks. - Foz do Iguaçu , 2013
Steinhilper, Rolf ; Kruse, Andreas ; Drews, Tom:
Ecological analysis of manufacturing systems focusing on the identification of variety-induced non value adding emission.
In: Seliger, Günther (ed.): 11. Global Conference on Sustainable Manufacturing : innovative solutions ; proceedings. - Berlin : Univ.-Verl. der TU, 2013 . - pp. 66-71
DOI: https://doi.org/10.14279/depositonce-4636
Ecological analysis of manufacturing systems focusing on the identification of variety-induced non value adding emission.
In: Seliger, Günther (ed.): 11. Global Conference on Sustainable Manufacturing : innovative solutions ; proceedings. - Berlin : Univ.-Verl. der TU, 2013 . - pp. 66-71
DOI: https://doi.org/10.14279/depositonce-4636
Bauer, Marco ; Schweinstig, Stefan ; Thäter, Stefan ; Steinhilper, Rolf:
Electronic product cleaning by using various CO2 based cleaning technologies.
In: MIT & SLIM 2013 : proceedings. - Ljubljana , 2013
Electronic product cleaning by using various CO2 based cleaning technologies.
In: MIT & SLIM 2013 : proceedings. - Ljubljana , 2013
Steinhilper, Rolf ; Freiberger, Stefan ; Kübler, Frank ; Böhner, Johannes:
RFID Integrated Adaption of Manufacturing Execution Systems for Energy Efficient Production.
In: Nee, Andrew Y. ; Song, Bin ; Ong, Soh-Khim (ed.): Re-engineering Manufacturing for Sustainability : Proceedings of the 20th CIRP International Conference on Life Cycle Engineering, Singapore 17-19 April, 2013. - Heidelberg : Springer, 2013 . - pp. 123-128
RFID Integrated Adaption of Manufacturing Execution Systems for Energy Efficient Production.
In: Nee, Andrew Y. ; Song, Bin ; Ong, Soh-Khim (ed.): Re-engineering Manufacturing for Sustainability : Proceedings of the 20th CIRP International Conference on Life Cycle Engineering, Singapore 17-19 April, 2013. - Heidelberg : Springer, 2013 . - pp. 123-128
Steinhilper, Rolf ; Slawik, Stefan ; Pentzlin, Felix ; Böhner, Johannes:
Increasing energy efficiency by remanufacturing and reengineering.
In: Umeda, Yasushi (ed.): Design for innovative value towards a sustainable society : proceedings. - Dordrecht : Springer, 2012 . - pp. 541-546
DOI: https://doi.org/10.1007/978-94-007-3010-6_104
Increasing energy efficiency by remanufacturing and reengineering.
In: Umeda, Yasushi (ed.): Design for innovative value towards a sustainable society : proceedings. - Dordrecht : Springer, 2012 . - pp. 541-546
DOI: https://doi.org/10.1007/978-94-007-3010-6_104
Haumann, Michael ; Westermann, Hans-Henrik ; Seifert, Stefan ; Butzer, Steffen:
Managing comlexity--A methodology, exemplified by the industrial sector of remanufacturing.
In: Björkman, Mats (ed.): Proceedings of the 5th International Swedish Production Symposium, SPS. - Linköping , 2012 . - pp. 107-113
Managing comlexity--A methodology, exemplified by the industrial sector of remanufacturing.
In: Björkman, Mats (ed.): Proceedings of the 5th International Swedish Production Symposium, SPS. - Linköping , 2012 . - pp. 107-113
Freiberger, Stefan ; Nagel, Alexander ; Steinhilper, Rolf:
WebCAN for Remanufacturers : a New Automotive CAN-Bus Tool Analyzing and File Sharing Application.
In: Seliger, Günther (ed.): Sustainable Manufacturing : Shaping Global Value Creation. - Berlin : Springer, 2012 . - pp. 143-148
DOI: https://doi.org/10.1007/978-3-642-27290-5_22
WebCAN for Remanufacturers : a New Automotive CAN-Bus Tool Analyzing and File Sharing Application.
In: Seliger, Günther (ed.): Sustainable Manufacturing : Shaping Global Value Creation. - Berlin : Springer, 2012 . - pp. 143-148
DOI: https://doi.org/10.1007/978-3-642-27290-5_22
Steinhilper, Rolf ; Freiberger, Stefan ; Albrecht, Matthias ; Käufl, Josef ; Binder, Eberhard ; Brückner, Constantin:
New technologies for remanufacturing of automotive systems communicating via CAN bus.
In: Hesselbach, Jürgen (ed.): Glocalized solutions for sustainability in manufacturing : proceedings. - Berlin : Springer, 2011 . - pp. 90-95
DOI: https://doi.org/10.1007/978-3-642-19692-8_16
New technologies for remanufacturing of automotive systems communicating via CAN bus.
In: Hesselbach, Jürgen (ed.): Glocalized solutions for sustainability in manufacturing : proceedings. - Berlin : Springer, 2011 . - pp. 90-95
DOI: https://doi.org/10.1007/978-3-642-19692-8_16
Brüning, Ralf ; Plumeyer, Martin ; Rosemann, Bernd ; Enderle, Bettina:
Guideline VDI 2343 focuses ReUse, offering excellent businesses possibilities.
In: Lechner, Peter (ed.): Prosperity Waste and Waste Resources : Proceedings. - Wien : facultas wuv universitätsverlag/BRO, 2009 . - pp. 151-160
Guideline VDI 2343 focuses ReUse, offering excellent businesses possibilities.
In: Lechner, Peter (ed.): Prosperity Waste and Waste Resources : Proceedings. - Wien : facultas wuv universitätsverlag/BRO, 2009 . - pp. 151-160
Rosemann, Bernd ; Steinhilper, Rolf ; Freiberger, Stefan:
Product and Process Assessment for Remanufacturing of Computer Controlled Automotive Components.
In: Duflou, Joost R. (ed.): Towards a closed loop economy : LCE 2006 ; proceedings. Band 2. - Leuven : Katholieke Univ., 2006 . - pp. 441-446
Product and Process Assessment for Remanufacturing of Computer Controlled Automotive Components.
In: Duflou, Joost R. (ed.): Towards a closed loop economy : LCE 2006 ; proceedings. Band 2. - Leuven : Katholieke Univ., 2006 . - pp. 441-446
Conference item
Scharl, Tizian ; Weizman, Yehuda ; Frisch, Michael ; Fuss, Franz Konstantin:
Identification of the ball's roll and slide behavior during soccer kicks.
2024
Event: ISEA 2024: The Engineering of Sport 15 , 8-11 July 2024 , Loughborough UK.
(Conference item: Conference , Speech )
Identification of the ball's roll and slide behavior during soccer kicks.
2024
Event: ISEA 2024: The Engineering of Sport 15 , 8-11 July 2024 , Loughborough UK.
(Conference item: Conference , Speech )
Klein, Melanie ; Steinhilper, Rolf:
Ressourceneffizienz in der CFK-Produktion? : Ergebnisse einer Demonstratorplattform.
2017
Event: Werkstoffwoche 2017 , 27.-29.09.2017 , Dresden.
(Conference item: Conference , Speech )
Ressourceneffizienz in der CFK-Produktion? : Ergebnisse einer Demonstratorplattform.
2017
Event: Werkstoffwoche 2017 , 27.-29.09.2017 , Dresden.
(Conference item: Conference , Speech )
Frisch, Michael ; Kafara, Markus:
Topologieoptimierung und additive Fertigung : meant for each other.
2016
Event: Hausmesse CINTEG AG , 23.6.2016 , Bad Alexandersbad.
(Conference item: Conference , Speech )
Topologieoptimierung und additive Fertigung : meant for each other.
2016
Event: Hausmesse CINTEG AG , 23.6.2016 , Bad Alexandersbad.
(Conference item: Conference , Speech )
Ellert, Florian ; Westermann, Hans-Henrik ; Steinhilper, Rolf:
Developing carbon fiber reinforced component repair technologies by using optical metrology and CAD/CAM-technology.
2013
Event: 22nd International Conference on Production Research , 28.07.-01.08.2013 , Iguassu Falls, Brazil.
(Conference item: Conference , Paper )
Developing carbon fiber reinforced component repair technologies by using optical metrology and CAD/CAM-technology.
2013
Event: 22nd International Conference on Production Research , 28.07.-01.08.2013 , Iguassu Falls, Brazil.
(Conference item: Conference , Paper )
Steinhilper, Rolf ; Süchting, Martin ; Kruse, Andreas:
Ecological holistic assessment for production technologies.
2013
Event: 11th Global Conference on Sustainable Manufacturing , 22.-25.09.2013 , Berlin, Deutschland.
(Conference item: Conference , Paper )
DOI: https://doi.org/10.14279/depositonce-4718
Ecological holistic assessment for production technologies.
2013
Event: 11th Global Conference on Sustainable Manufacturing , 22.-25.09.2013 , Berlin, Deutschland.
(Conference item: Conference , Paper )
DOI: https://doi.org/10.14279/depositonce-4718
Kruse, Andreas ; Butzer, Steffen ; Steinhilper, Rolf:
Environmental assessment of variety-induced complexity in production systems.
2013
Event: 22nd International Conference on Production Research , 28.07.-01.08.2013 , Iguassu Falls, Brazil.
(Conference item: Conference , Other Presentation type)
Environmental assessment of variety-induced complexity in production systems.
2013
Event: 22nd International Conference on Production Research , 28.07.-01.08.2013 , Iguassu Falls, Brazil.
(Conference item: Conference , Other Presentation type)
Steinhilper, Rolf ; Kleylein-Feuerstein, Joachim ; Reger, Arnim:
Radio frequency communication : a new (service-) interface for electronic control units.
2013
Event: 12th International Conference on Management of Innovative Technologies & 4th International Conference on Sustainable Life in Manufacturing , 22.-24.09.2013 , Fiesa, Slovenia.
(Conference item: Conference , Paper )
Radio frequency communication : a new (service-) interface for electronic control units.
2013
Event: 12th International Conference on Management of Innovative Technologies & 4th International Conference on Sustainable Life in Manufacturing , 22.-24.09.2013 , Fiesa, Slovenia.
(Conference item: Conference , Paper )
Nagel, Alexander ; Thäter, Stefan ; Steinhilper, Rolf:
Range-extender in electric vehicles : a revival of (highly optimized) two-stroke engines on a small scale.
2013
Event: 12th International Conference on Management of Innovative Technologies & 4th International Conference on Sustainable Life in Manufacturing , 22.-24.09.2013 , Fiesa, Slovenia.
(Conference item: Conference , Paper )
Range-extender in electric vehicles : a revival of (highly optimized) two-stroke engines on a small scale.
2013
Event: 12th International Conference on Management of Innovative Technologies & 4th International Conference on Sustainable Life in Manufacturing , 22.-24.09.2013 , Fiesa, Slovenia.
(Conference item: Conference , Paper )
Nagel, Alexander ; Steinhilper, Rolf ; Freiberger, Stefan ; Thäter, Stefan:
Service engineering for prospective vehicle service processes.
2013
Event: 12th International Conference on Management of Innovative Technologies & 4th International Conference on Sustainable Life in Manufacturing , 22.-24.09.2013 , Fiesa, Slovenia.
(Conference item: Conference , Other Presentation type)
Service engineering for prospective vehicle service processes.
2013
Event: 12th International Conference on Management of Innovative Technologies & 4th International Conference on Sustainable Life in Manufacturing , 22.-24.09.2013 , Fiesa, Slovenia.
(Conference item: Conference , Other Presentation type)
Böhner, Johannes:
Prozessorientierter Ansatz zur Identifizierung von Energieeinsparpotenzialen.
2010
Event: Forum Energieeffizienz in der Produktion , 17.03.2010 , Stuttgart, Deutschland.
(Conference item: Conference , Poster )
Prozessorientierter Ansatz zur Identifizierung von Energieeinsparpotenzialen.
2010
Event: Forum Energieeffizienz in der Produktion , 17.03.2010 , Stuttgart, Deutschland.
(Conference item: Conference , Poster )
Steinhilper, Rolf:
Automotive Service Engineering and Remanufacturing : New Technologies and Opportunities.
2008
Event: LCE 2008, 15th CIRP International Conference on Life Cycle Engineering , 17.-19.03.2008 , Sydney, Australien.
(Conference item: Conference , Paper )
Automotive Service Engineering and Remanufacturing : New Technologies and Opportunities.
2008
Event: LCE 2008, 15th CIRP International Conference on Life Cycle Engineering , 17.-19.03.2008 , Sydney, Australien.
(Conference item: Conference , Paper )
Brüning, Ralf ; Rosemann, Bernd ; Enderle, Bettina:
WEEE: Recommendations on ReUse for the concerned parties : the guideline VDI 2343.
2008
Event: Electronics Goes Green 2008+ in conjunction with the 1st World ReUse Forum , 07.-10.09.2008 , Berlin, Deutschland.
(Conference item: Conference , Speech )
WEEE: Recommendations on ReUse for the concerned parties : the guideline VDI 2343.
2008
Event: Electronics Goes Green 2008+ in conjunction with the 1st World ReUse Forum , 07.-10.09.2008 , Berlin, Deutschland.
(Conference item: Conference , Speech )
Freiberger, Stefan:
Remanufacturing of Mechatronics and Electronics.
2006
Event: 1st Meeting of APRA Electronics & Mechatronics Division , 10.05.2006 , Harrisburg, Pennsylvania, USA.
(Conference item: Workshop , Speech )
Remanufacturing of Mechatronics and Electronics.
2006
Event: 1st Meeting of APRA Electronics & Mechatronics Division , 10.05.2006 , Harrisburg, Pennsylvania, USA.
(Conference item: Workshop , Speech )
Preprint, postprint
Mahr, Alexander ; Rosnitschek, Tobias ; Schütt, Thomas Peter ; Tremmel, Stephan ; Döpper, Frank:
Evaluation of Powder- and Extrusion- based Metal Additive Manufacturing Processes for the Fabrication of Spare Parts in Electromobility.
Preprints , 2024
DOI: https://doi.org/10.20944/preprints202403.1258.v1
Evaluation of Powder- and Extrusion- based Metal Additive Manufacturing Processes for the Fabrication of Spare Parts in Electromobility.
Preprints , 2024
DOI: https://doi.org/10.20944/preprints202403.1258.v1
Project report, research report, expert assessments
Mahr, Alexander ; Koller, Jan ; Tarasova, Anna ; Taumann, Sarah ; Lingner, Andreas ; Lück, Thomas ; Walczak, Philipp ; Flothow, Abraham ; Walczak, Michael:
Additive Refabrikation in der Elektrofahrradbranche : Werterhaltung in der urbanen Elektromobilität mittels additiver Refabrikation.
Bayreuth ; Heidelberg ; Heimsheim ; Augsburg 2022 . - 27 p.
Additive Refabrikation in der Elektrofahrradbranche : Werterhaltung in der urbanen Elektromobilität mittels additiver Refabrikation.
Bayreuth ; Heidelberg ; Heimsheim ; Augsburg 2022 . - 27 p.
Mahr, Alexander ; Bay, Christian:
Arbeitssicherheit in der additiven Fertigung : Gefährdungen und Handlungsempfehlungen.
Anwendungszentrum 3D-Druck Oberfranken
Bayreuth 2019
Arbeitssicherheit in der additiven Fertigung : Gefährdungen und Handlungsempfehlungen.
Anwendungszentrum 3D-Druck Oberfranken
Bayreuth 2019
Use this URL to embed this page in external websites:
https://eref.uni-bayreuth.de/XML/divisions/330003.xml
https://eref.uni-bayreuth.de/XML/divisions/330003.xml