Institutionen der Universität Bayreuth
Lehrstuhl Konstruktionslehre und CAD - Univ.-Prof. Dr.-Ing. Stephan Tremmel

Eine Ebene nach oben ...
Exportieren als [RSS feed] RSS 1.0 [RSS2 feed] RSS 2.0
Gruppieren nach: Jahr | Person | Publikationsform
Springe zu: 2024 | 2023 | 2022 | 2021 | 2020 | 2019
Anzahl der Einträge auf dieser Ebene: 120.

2024

Seynstahl, Armin ; Köbrich, Manuel ; Rosnitschek, Tobias ; Göken, Mathias ; Tremmel, Stephan:
Enhancing the lifetime and vacuum tribological performance of PVD-MoS₂ coatings by nitrogen modification.
In: Surface and Coatings Technology. Bd. 477 (2024) . - 130343.
DOI: https://doi.org/10.1016/j.surfcoat.2023.130343

2023

Seynstahl, Armin ; Köbrich, Manuel ; Göken, Mathias ; Tremmel, Stephan:
Improving tribological performance and coating properties of PVD-MoS₂ coatings by nitrogen doping.
2023
Veranstaltung: 9th International Tribology Conference , 25.09.-30.09.2023 , Fukuoka, Japan.
(Veranstaltungsbeitrag: Kongress/Konferenz/Symposium/Tagung , Vortrag )

Orgeldinger, Christian ; Seynstahl, Armin ; Rosnitschek, Tobias ; Ramos-Grez, Jorge ; Marian, Max ; Tremmel, Stephan:
Tribological behavior of additively manufactured 17-4 PH stainless steel : Influence due to the process and post-treatment.
2023
Veranstaltung: 9th International Tribology Conference , 25.09.-30.09.2023 , Fukuoka, Japan.
(Veranstaltungsbeitrag: Kongress/Konferenz/Symposium/Tagung , Vortrag )

Orgeldinger, Christian ; Reck, Manuel ; Merklein, Marion ; Tremmel, Stephan:
Locally optimized microtextures in highly loaded tribological contacts : Numerical design and manufacturing by micro coining.
2023
Veranstaltung: 9th International Tribology Conference , 25.09.-30.09.2023 , Fukuoka, Japan.
(Veranstaltungsbeitrag: Kongress/Konferenz/Symposium/Tagung , Vortrag )

Kormann, Andreas ; Mohr, Johannes ; Tremmel, Stephan:
Analyse des Automatisierungspotentials in der Produktentwicklung mittels Python.
2023
Veranstaltung: 21. Gemeinsames Kolloquium Konstruktionstechnik 2023 , 21.-22.09.2023 , Rostock.
(Veranstaltungsbeitrag: Kongress/Konferenz/Symposium/Tagung , Vortrag )

Baumann, Tobias ; Tremmel, Stephan:
Berücksichtigung der elastischen Umgebung in der Mehrkörpersimulation von Wälzlagern.
2023
Veranstaltung: 21. Gemeinsames Kolloquium Konstruktionstechnik 2023 , 21.-22.09.2023 , Rostock.
(Veranstaltungsbeitrag: Kongress/Konferenz/Symposium/Tagung , Vortrag )

Volltext
Mohr, Johannes ; Kormann, Andreas ; Grohmann, Peter ; Tremmel, Stephan:
Automatisierte Datenextraktion auf Basis regulärer Ausdrücke.
In: Tremmel, Stephan ; Alber-Laukant, Bettina ; Rosnitschek, Tobias (Hrsg.): Tagungsband 24. Bayreuther 3D-Konstrukteurstag. - Universität Bayreuth , 2023
DOI: https://doi.org/10.15495/EPub_UBT_00007187

Volltext
Wittmann, Johannes ; Hüter, Florian:
Frequenzganganalyse reduzierter FE-Strukturen : Stationäre strukturdynamische Simulation im Frequenzbereich auf Basis von Z88.
2023
Veranstaltung: 24. Bayreuther 3D-Konstrukteurstag , 13.09.2023 , Bayreuth.
(Veranstaltungsbeitrag: Kongress/Konferenz/Symposium/Tagung , Vortrag )
DOI: https://doi.org/10.15495/EPub_UBT_00007192

Volltext
Hüter, Florian:
Hyperelastizität in der FEM : Bewertung der Vorhersagegüte unterschiedlicher Materialmodelle.
2023
Veranstaltung: 24. Bayreuther 3D-Konstrukteurstag , 13.09.2023 , Bayreuth.
(Veranstaltungsbeitrag: Kongress/Konferenz/Symposium/Tagung , Vortrag )
DOI: https://doi.org/10.15495/EPub_UBT_00007193

Volltext
Hüter, Florian:
Die neue Z88Aurora®V6 –neue Features & Tools.
2023
Veranstaltung: 24. Bayreuther 3D-Konstrukteurstag , 13.09.2023 , Bayreuth.
(Veranstaltungsbeitrag: Kongress/Konferenz/Symposium/Tagung , Vortrag )
DOI: https://doi.org/10.15495/EPub_UBT_00007194

Volltext
Hofmann, Tanja ; Müller-Reisenauer, Max ; Wachtel, Karl ; Neßler, Steffen ; Giffels, Thomas ; Probst, Michael ; Gries, Christian ; Sperschneider, Alexandra ; Raab, Klaus ; Hüter, Florian ; Wittmann, Johannes ; Paßmann, Ralf ; Will, Kevin ; Strasser, Christoph ; Vogel, Ândreas ; Eck, Georg ; Mohr, Johannes ; Probst, Michael ; Menke, Tobias ; Thieme, Cornelia ; Ohnemüller, Gregor ; Rosemann, Bernd ; Isslinger, Thomas ; Rosnitschek, Tobias ; Grohmann, Peter:
Tagungsband 24. Bayreuther 3D-Konstrukteurstag.
Hrsg.: Tremmel, Stephan ; Alber-Laukant, Bettina ; Rosnitschek, Tobias
Bayreuth : Universität Bayreuth, Lehrstuhl für Konstruktionstechnik/CAD , 2023
DOI: https://doi.org/10.15495/EPub_UBT_00007236

Rosnitschek, Tobias ; Erber, Maximilian ; Hartmann, Christoph ; Alber-Laukant, Bettina ; Volk, Wolfram ; Tremmel, Stephan:
Integrating Geometric Metamodel-Assisted Process Assurance into Topology Optimization of Low-Pressure Die Castings.
In: Proceedings of the Munich Symposium on Lightweight Design 2022 : Tagungsband zum Münchner Leichtbauseminar 2022. - Cham : Springer Vieweg, 2023 . - S. 109-119
DOI: https://doi.org/10.1007/978-3-031-33758-1_9

Mohr, Johannes ; Grohmann, Peter ; Tremmel, Stephan:
Gate2HPC - KI und FEA auf HPC.
2023
Veranstaltung: Netzsch AI Community , 06.07.2023 , Selb.
(Veranstaltungsbeitrag: Kongress/Konferenz/Symposium/Tagung , Vortrag )

Volltext
Hüter, Florian ; Wittmann, Johannes:
Simulation für alle dank freier FEM-Lösung.
In: Konstruktionspraxis. (6 Juli 2023) .

Nimmesgern, Julian ; Roppel, Matthias ; Lange, Christopher ; Roith, Bernd ; Alber-Laukant, Bettina ; Tremmel, Stephan:
Accelerated determination of three-dimensional temperature fields of dual-purpose casks using combined numerical and analytical methods.
2023
Veranstaltung: PATRAM 22 , 11.06. - 15.06.2023 , Juan-les-Pins, France.
(Veranstaltungsbeitrag: Kongress/Konferenz/Symposium/Tagung , Paper )

Roppel, Matthias ; Heigl, Sebastian ; Nimmesgern, Julian ; Roith, Bernd ; Alber-Laukant, Bettina ; Tremmel, Stephan:
Numerical parameter study to describe the behavior of the fuel rod cladding temperature of a 15x15 spent PWR fuel assembly stored in a dual-purpose cask.
2023
Veranstaltung: PATRAM 22 , 11.06. - 15.06.2023 , Juan-les-Pins, France.
(Veranstaltungsbeitrag: Kongress/Konferenz/Symposium/Tagung , Paper )

Salavati, Mohammad ; Rosnitschek, Tobias ; Kleinschrodt, Claudia ; Tremmel, Stephan ; Claudia, Fleck:
Digitalization of the mechanical load-bearing implants : a review on chances and risks of individualization and data collection.
In: Deutscher Verband für Materialforschung und -prüfung e.V. (Hrsg.): Mobilität der Zukunft - Bauteilzuverlässigkeit im digitalen Zeitalter. - Berlin , 2023
DOI: https://doi.org/10.48447/DVM-TAG-2023-BB

Mohr, Johannes ; Tremmel, Stephan:
Automatisierte und intelligente Extraktion von Werkzeugdaten.
2023
Veranstaltung: TOOLMANAGEMENT in der digitalen Praxis , Böblingen.
(Veranstaltungsbeitrag: Kongress/Konferenz/Symposium/Tagung , Vortrag )

Rosnitschek, Tobias:
Digitale Materialentwicklung am Beispiel strukturgefüllter metallischer Komponenten in der extrusionsbasierten additiven Fertigung.
Düren : Shaker Verlag , 2023 . - 150 S. - (Fortschritte in Konstruktion und Produktion ; 59 )
( Dissertation, 2023 , Universität Bayreuth)
DOI: https://doi.org/10.2370/9783844090147

Orgeldinger, Christian ; Rosnitschek, Tobias ; Tremmel, Stephan:
Tribosimulation von Gelenken : Möglichkeiten und Grenzen.
2023
Veranstaltung: EFDS Workshop: Implantate – Wenn die Antwort in der Schicht steckt , 27.02-28.02.2023 , Tuttlingen.
(Veranstaltungsbeitrag: Workshop , Vortrag )

Orgeldinger, Christian ; Rosnitschek, Tobias ; Tremmel, Stephan:
Numerische Methoden zur tribologischen Optimierung von Knie-Totalendoprothesen.
2023
Veranstaltung: NeZuMed Innovationstag 2023 , 13.02.2023 , Bayreuth.
(Veranstaltungsbeitrag: Kongress/Konferenz/Symposium/Tagung , Vortrag )

Volltext
Rosnitschek, Tobias ; Baumann, Tobias ; Orgeldinger, Christian ; Alber-Laukant, Bettina ; Tremmel, Stephan:
Manufacturing Constraints in Topology Optimization for the Direct Manufacturing of Extrusion-Based Additively Manufactured Parts.
In: Designs. Bd. 7 (2023) Heft 1 . - 8.
DOI: https://doi.org/10.3390/designs7010008

Gerschütz, Benjamin ; Sauer, Christopher ; Kormann, Andreas ; Nicklas, Simon J. ; Goetz, Stefan ; Roppel, Matthias ; Tremmel, Stephan ; Paetzold-Byhain, Kristin ; Wartzack, Sandro:
Digital Engineering Methods in Practical Use during Mechatronic Design Processes.
In: Designs. Bd. 7 (2023) Heft 4 . - 93.
DOI: https://doi.org/10.3390/designs7040093

Seynstahl, Armin ; Polzer, Markus ; Bartz, Marcel ; Wartzack, Sandro ; Tremmel, Stephan:
Effects of Nitrogen Modification of Porous PVD–MoS₂ Coatings on the Tribological Behavior under Rolling–Sliding Conditions in Vacuum.
In: Lubricants. Bd. 11 (2023) Heft 8 . - 335.
DOI: https://doi.org/10.3390/lubricants11080335

Orgeldinger, Christian ; Rosnitschek, Tobias ; Tremmel, Stephan:
Numerical optimization of highly loaded microtextured contacts : understanding and mastering complexity.
In: Industrial Lubrication and Tribology. Bd. 75 (2023) Heft 7 . - S. 741-747.
DOI: https://doi.org/10.1108/ILT-11-2022-0335

Marian, Max ; Tremmel, Stephan:
Physics-Informed Machine Learning : An Emerging Trend in Tribology.
In: Lubricants. Bd. 11 (2023) Heft 11 . - 463.
DOI: https://doi.org/10.3390/lubricants11110463

Erber, Maximilian ; Rosnitschek, Tobias ; Bauer, Constantin ; Ali Güldali, Muhammet ; Alber-Laukant, Bettina ; Tremmel, Stephan ; Volk, Wolfram ; Hartmann, Christoph:
Predicting the local solidification time using spherical neural networks.
In: IOP Conference Series: Materials Science and Engineering. Bd. 1281 (2023) . - 012037.
DOI: https://doi.org/10.1088/1757-899X/1281/1/012037

Volltext
Rosnitschek, Tobias ; Erber, Maximilian ; Alber-Laukant, Bettina ; Hartmann, Christoph ; Volk, Wolfram ; Rieg, Frank ; Tremmel, Stephan:
Predicting the solidification time of low pressure die castings using geometric feature-based machine learning metamodels.
In: Procedia CIRP. Bd. 118 (2023) . - S. 1102-1107.
DOI: https://doi.org/10.1016/j.procir.2023.06.189

Orgeldinger, Christian ; Seynstahl, Armin ; Rosnitschek, Tobias ; Tremmel, Stephan:
Surface Properties and Tribological Behavior of Additively Manufactured Components : A Systematic Review.
In: Lubricants. Bd. 11 (2023) Heft 6 . - 257.
DOI: https://doi.org/10.3390/lubricants11060257

2022

Rosnitschek, Tobias ; Baumann, Tobias ; Orgeldinger, Christian ; Alber-Laukant, Bettina ; Tremmel, Stephan:
Transforming Process Knowledge into Manufacturing Constraints in Topology Optimization for the Direct Manufacturing of Extrusion-Based Additively Manufacturing Parts.
2022
Veranstaltung: 1st International Conference on Additive Manufacturing (ICAM) , 26.09.-27.09.2022 , Lagos, hybrid.
(Veranstaltungsbeitrag: Kongress/Konferenz/Symposium/Tagung , Vortrag )

Baier, Maximilian:
Angewandte Toolboxentwicklung im Projekt FORCuDE@BEV.
2022
Veranstaltung: 23. Bayreuther 3D-Konstrukteurstag , 14. September 2022 , Bayreuth.
(Veranstaltungsbeitrag: Kongress/Konferenz/Symposium/Tagung , Vortrag )
DOI: https://doi.org/10.15495/EPub_UBT_00006603

Volltext
Wittmann, Johannes ; Hüter, Florian:
FE-Modalanalyse auf Basis von Z88 - Eigenschwingungen in der Antriebstechnik.
2022
Veranstaltung: 23. Bayreuther 3D-Konstrukteurstag , 14. September 2022 , Bayreuth.
(Veranstaltungsbeitrag: Kongress/Konferenz/Symposium/Tagung , Vortrag )
DOI: https://doi.org/10.15495/EPub_UBT_00006650

Volltext
Hüter, Florian:
FE-Simulation von Sandwichbauteilen – Modellierung elastisch-plastischer Schaumkerne.
2022
Veranstaltung: 23. Bayreuther 3D-Konstrukteurstag , 14. September 2022 , Bayreuth.
(Veranstaltungsbeitrag: Kongress/Konferenz/Symposium/Tagung , Vortrag )
DOI: https://doi.org/10.15495/EPub_UBT_00006647

Volltext
Hüter, Florian ; Singer, Daniel:
Simulation hyperelastischer Materialien mit Z88 - Kalibrierung hyperelastischer Materialmodelle.
2022
Veranstaltung: 23. Bayreuther 3D-Konstrukteurstag , 14. September 2022 , Bayreuth.
(Veranstaltungsbeitrag: Kongress/Konferenz/Symposium/Tagung , Vortrag )
DOI: https://doi.org/10.15495/EPub_UBT_00006648

Kormann, Andreas:
Simulationsgestützte virtuelle Sensoren : Modellierungsstrategien unter Berücksichtigung mehrerer Anwendungsphasen.
2022
Veranstaltung: 23. Bayreuther 3D-Konstrukteurstag , 14. September 2022 , Bayreuth.
(Veranstaltungsbeitrag: Kongress/Konferenz/Symposium/Tagung , Vortrag )
DOI: https://doi.org/10.15495/EPub_UBT_00006603

Volltext
Hüter, Florian ; Wittmann, Johannes:
Zukünftige Features & Tools in Z88Aurora - ein Preview.
2022
Veranstaltung: 23. Bayreuther 3D-Konstrukteurstag , 14. September 2022 , Bayreuth.
(Veranstaltungsbeitrag: Kongress/Konferenz/Symposium/Tagung , Vortrag )
DOI: https://doi.org/10.15495/EPub_UBT_00006649

Mohr, Johannes ; Tremmel, Stephan ; Rieg, Frank:
Methoden der Featureextraktion und deren Potentiale zur Kompatibilitätsverbesserung von Austauschdateien.
2022
Veranstaltung: VDMA Technologieforum 2022 , Stuttgart.
(Veranstaltungsbeitrag: Kongress/Konferenz/Symposium/Tagung , Vortrag )

Baier, Maximilian ; Kormann, Andreas ; Sendlbeck, Stefan ; Sauer, Christopher ; Roppel, Matthias ; Kleinschrodt, Claudia ; Otto, Michael ; Schleich, Benjamin ; Tremmel, Stephan ; Stahl, Karsten ; Wartzack, Sandro:
Vorgehensweise zur Digitalisierung und Automatisierung einer Getriebeauswahl.
2022
Veranstaltung: 20. Gemeinsames Kolloquium Konstruktionstechnik , 28.-29. September 2022 , Clausthal-Zellerfeld.
(Veranstaltungsbeitrag: Kongress/Konferenz/Symposium/Tagung , Vortrag )

Kormann, Andreas ; Roppel, Matthias ; Tremmel, Stephan:
Bewertung von Modellierungsstrategien für simulationsgestützte virtuelle Sensoren.
2022
Veranstaltung: 20. Gemeinsames Kolloquium Konstruktionstechnik , 28.-29. September 2022 , Clausthal-Zellerfeld.
(Veranstaltungsbeitrag: Kongress/Konferenz/Symposium/Tagung , Vortrag )

Reck, Manuel ; Orgeldinger, Christian ; Tremmel, Stephan ; Merklein, Marion:
Investigation on micro textured tappets from design and production to the application properties.
2022
Veranstaltung: 4th International Conference on Materials Design and Applications , 07.07. - 08.07.2022 , FEUP, Porto, Portugal.
(Veranstaltungsbeitrag: Kongress/Konferenz/Symposium/Tagung , Vorlesung )

Orgeldinger, Christian ; Tremmel, Stephan:
Numerical optimization of highly loaded microtextured contacts : understanding and mastering complexity.
2022
Veranstaltung: YTRS 2022 Conference , Karlsruhe.
(Veranstaltungsbeitrag: Kongress/Konferenz/Symposium/Tagung , Vortrag )

Orgeldinger, Christian ; Tremmel, Stephan:
Reducing friction using micro-textured machine elements : An advanced simulation approach for the optimization of textured surfaces in cam-tappet contacts.
2022
Veranstaltung: NORDTRIB 2022 Conference , 14.-17.06.2022 , Alesund, Norway.
(Veranstaltungsbeitrag: Kongress/Konferenz/Symposium/Tagung , Vortrag )

Jüttner, Michael ; Bartz, Marcel ; Tremmel, Stephan ; Correns, Martin ; Wartzack, Sandro:
Edge Pressures Obtained Using FEM and Half-Space : A Study of Truncated Contact Ellipses.
In: Lubricants. Bd. 10 (Juni 2022) Heft 6 . - No. 107.
DOI: https://doi.org/10.3390/lubricants10060107

Mohr, Johannes ; Kleinschrodt, Claudia:
Vorgehen zur Verbesserung der Kompatiblität von Austauschdateien.
2022
Veranstaltung: GTDE Mitgliederversammlung 2022 , Webkonferenz.
(Veranstaltungsbeitrag: Kongress/Konferenz/Symposium/Tagung , Programmrede )

Jüttner, Michael ; Bartz, Marcel ; Tremmel, Stephan ; Wartzack, Sandro:
On the Transient Effects at the Beginning of 3D Elastic-Plastic Rolling Contacts for a Circular Point Contact Considering Isotropic Hardening.
In: Lubricants. Bd. 10 (19 März 2022) Heft 3 . - No. 47.
DOI: https://doi.org/10.3390/lubricants10030047

Tremmel, Stephan ; Luo, Xiongxin ; Rothammer, Benedict ; Seynstahl, Armin ; Wang, Bo ; Rosenkranz, Andreas ; Marian, Max ; Zhu, Laipan:
Evaluation of DLC, MoS₂, and Ti₃C₂Tₓ thin films for triboelectric nanogenerators.
In: Nano Energy. Bd. 97 (März 2022) . - No. 107185.
DOI: https://doi.org/10.1016/j.nanoen.2022.107185

Mohr, Johannes ; Kleinschrodt, Claudia ; Tremmel, Stephan ; Rieg, Frank:
Compatibility Improvement of Interrelated Items in Exchange Files : A General Method for Supporting the Data Integrity of Digital Twins.
In: Applied Sciences. Bd. 12 (2022) Heft 16 . - 8099.
DOI: https://doi.org/10.3390/app12168099

Volltext
Roppel, Matthias ; Rieg, Frank ; Tremmel, Stephan:
Definition and Determination of Fin Substitution Factors Accelerating Thermal Simulations.
In: Applied Sciences. Bd. 12 (2022) Heft 9 . - 4449.
DOI: https://doi.org/10.3390/app12094449

Orgeldinger, Christian ; Seynstahl, Armin ; Rosnitschek, Tobias ; Zimmermann, Anna ; Tremmel, Stephan:
Einfluss fertigungsbedingter Effekte auf das tribologische Verhalten im ADAM-Verfahren gedruckter Bauteile.
In: Gesellschaft für Tribologie e.V. (Hrsg.): Reibung, Schmierung und Verschleiß : Forschung und praktische Anwendungen : 63. Tribologie-Fachtagung 2022. - Göttingen , 2022

Volltext
Tremmel, Stephan ; Roppel, Matthias ; Mohr, Johannes:
FIT4HPC - High Performance Computing für KMU.
In: Newsletter Wissenschaftliche Gesellschaft für Produktentwicklung, WiGeP. (2022) Heft 1 . - S. 13.

Volltext
Neubauer, Vanessa J. ; Hüter, Florian ; Wittmann, Johannes ; Trossmann, Vanessa T. ; Kleinschrodt, Claudia ; Alber-Laukant, Bettina ; Rieg, Frank ; Scheibel, Thomas:
Flow Simulation and Gradient Printing of Fluorapatite- and Cell-Loaded Recombinant Spider Silk Hydrogels.
In: Biomolecules. Bd. 12 (2022) Heft 10 . - 1413.
DOI: https://doi.org/10.3390/biom12101413

Volltext
Roppel, Matthias ; Lange, Christopher ; Zimmermann, Markus ; Alber-Laukant, Bettina ; Rieg, Frank ; Tremmel, Stephan:
Further developments of the simulation tool Z88ENSI for the accelerated determination of temperature fields in dual purpose casks.
In: ENSI Erfahrungs- und Forschungsbericht. (2022) . - S. 292-300.

Erber, Maximilian ; Rosnitschek, Tobias ; Hartmann, Christoph ; Alber-Laukant, Bettina ; Tremmel, Stephan ; Volk, Wolfram:
Geometry-based Assurance of Directional Solidification for Complex Topology-optimized Castings using the Medial Axis Transform.
In: Computer-Aided Design. Bd. 152 (2022) . - 103394.
DOI: https://doi.org/10.1016/j.cad.2022.103394

Reck, Manuel ; Orgeldinger, Christian ; Tremmel, Stephan ; Merklein, Marion:
Investigation on micro-textured tappets from design and production to the application properties.
In: Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials : Design and Applications. (2022) . - 9 S..
DOI: https://doi.org/10.1177/14644207221124813

Rosnitschek, Tobias ; Erber, Maximilian ; Volk, Wolfram ; Tremmel, Stephan:
Kombination von Topologie-Optimierung und Prozessabsicherung im Leichtmetallguss.
In: Jahresmagazin Werkstofftechnik : Ingenieurwissenschaften. (2022) . - S. 66-68.

Mohr, Johannes:
Kompatibilitätsoptimierung neutraler Austauschdateien - Herausforderungen, Lösungsstrategien und Vorgehen.
2022
Veranstaltung: 23. Bayreuther 3D-Konstrukteurstag , 14. Sept. 2022 , Bayreuth.
(Veranstaltungsbeitrag: Kongress/Konferenz/Symposium/Tagung , Vortrag )
DOI: https://doi.org/10.15495/EPub\textunderscore UBT\textunderscore 00006603

Tremmel, Stephan ; Marian, Max:
Machine Learning in Tribology : More than Buzzwords?
In: Lubricants. Bd. 10 (2022) Heft 4 . - No. 68.
DOI: https://doi.org/10.3390/lubricants10040068

Schütt, Thomas Peter ; Nagengast, Niko ; Frisch, Michael ; Rosnitschek, Tobias ; Tremmel, Stephan:
Materialsubstitution und kaskadierte Wiederverwertung für nachhaltige Orthesen in der additiven Fertigung.
2022
Veranstaltung: DVM-Arbeitskreis "Zuvervlässigkeit von Implantaten und Biostrukturen" , 29.09 - 30.09.2022 , Rostock.
(Veranstaltungsbeitrag: Kongress/Konferenz/Symposium/Tagung , Vortrag )

Veigl, Bianca ; Rosnitschek, Tobias ; Kleinschrodt, Claudia ; Alber-Laukant, Bettina ; Tremmel, Stephan:
Nachhaltigkeit durch Materialsubstitution : der Monomat-Ansatz.
In: Jahresmagazin Werkstofftechnik : Ingenieurwissenschaften. (2022) . - S. 64-65.

Volltext
Rosnitschek, Tobias:
Nachhaltigkeit und Resilienz durch Additive Innovationen.
2022
Veranstaltung: 23. Bayreuther 3D-Konstrukteurstag , 14. Sept. 2022 , Bayreuth.
(Veranstaltungsbeitrag: Kongress/Konferenz/Symposium/Tagung , Vortrag )
DOI: https://doi.org/10.15495/EPub_UBT_00006603

Rosnitschek, Tobias ; Gläseke, Annika ; Hüter, Florian ; Alber-Laukant, Bettina ; Tremmel, Stephan:
Optimization of Fused Filament Fabricated Infill Patterns for Sandwich Structures in a Three-Point Bending Test.
In: Rieser, Jasper ; Endress, Felix ; Horoschenkoff, Alexander ; Höfer, Philipp ; Dickhut, Tobias ; Zimmermann, Markus (Hrsg.): Proceedings of the Munich Symposium on Lightweight Design 2021 : Tagungsband zum Münchner Leichtbauseminar 2021. - Berlin : Springer Vieweg, 2022 . - S. 115-123
DOI: https://doi.org/10.1007/978-3-662-65216-9_11

Schwarz, Sebastian ; Grillenberger, Hannes ; Tremmel, Stephan ; Wartzack, Sandro:
Prediction of Rolling Bearing Cage Dynamics Using Dynamics Simulations and Machine Learning Algorithms.
In: Tribology Transactions. Bd. 65 (2022) Heft 2 . - S. 225-241.
DOI: https://doi.org/10.1080/10402004.2021.1934618

Volltext
Baumann, Tobias ; Schütt, Thomas Peter ; Rosnitschek, Tobias ; Tremmel, Stephan:
Prozessgerechte Strukturoptimierung.
2022
Veranstaltung: 23. Bayreuther 3D-Konstrukteurstag , 14. Sept. 2022 , Bayreuth.
(Veranstaltungsbeitrag: Workshop , Vortrag )
DOI: https://doi.org/10.15495/EPub_UBT_00006603

Krauß, Sebastian ; Seynstahl, Armin ; Tremmel, Stephan ; Meyer, Bernd ; Bitzek, Erik ; Göken, Mathias ; Yokosawa, Tadahiro ; Apeleo Zubiri, Benjamin ; Spiecker, Erdmann ; Merle, Benoit:
Structural reorientation and compaction of porous MoS₂ coatings during wear testing.
In: Wear. Bd. 500-501 (2022) . - 204339.
DOI: https://doi.org/10.1016/j.wear.2022.204339

Volltext

Orgeldinger, Christian ; Wohlgemuth, Florian ; Müller, Andreas Michael ; Hausotte, Tino:
Towards efficient application-dependent dimensional measurements with computed tomography : optimized reduction of measurement duration using continuous scan mode ; experimental investigations.
In: Journal of Sensors and Sensor Systems. Bd. 11 (2022) Heft 2 . - S. 219-223.
DOI: https://doi.org/10.5194/jsss-11-219-2022

Orgeldinger, Christian ; Schütt, Thomas Peter ; Kleinschrodt, Claudia ; Rosnitschek, Tobias ; Tremmel, Stephan:
Tribologische Optimierung von Knie-Totalendoprothesen : Ein numerischer Ansatz.
2022
Veranstaltung: DVM-Arbeitskreis "Zuverlässigkeit von Implantaten und Biostrukturen" , 29.09. - 30.09.2022 , Rostock.
(Veranstaltungsbeitrag: Workshop , Vortrag )

Rosnitschek, Tobias ; Orgeldinger, Christian ; Alber-Laukant, Bettina ; Tremmel, Stephan:
Tribologisches Verhalten additiv gefertigter Bauteile : Perspektiven für die Produktentwicklung durch fertigungsbedingte Effekte erkennen.
In: Universität Duisburg Essen (Hrsg.): Achte IFToMM D-A-CH Konferenz 2022. - Duisburg , 2022
DOI: https://doi.org/10.17185/duepublico/75417

Schwarz, Sebastian ; Grillenberger, Hannes ; Graf-Goller, Oliver ; Bartz, Marcel ; Tremmel, Stephan ; Wartzack, Sandro:
Using Machine Learning Methods for Predicting Cage Performance Criteria in an Angular Contact Ball Bearing.
In: Lubricants. Bd. 10 (2022) Heft 2 . - No. 25.
DOI: https://doi.org/10.3390/lubricants10020025

Orgeldinger, Christian ; Seynstahl, Armin ; Rosnitschek, Tobias ; Tremmel, Stephan:
Einfluss fertigungsbedingter Effekte auf das tribologische Verhalten im ADAM-Verfahren gedruckter Bauteile.
In: Tribologie und Schmierungstechnik. Bd. 69 (2022) Heft 5-6 . - S. 28-33.
DOI: https://doi.org/10.24053/TuS-2022-0042

Volltext
Nimmesgern, Julian ; Roppel, Matthias ; Alber-Laukant, Bettina ; Tremmel, Stephan:
Extension of Z88ENSI : Consideration of the height-specific burn-up of spent fuel assemblies and estimation of the fuel rod cladding temperature.
In: ENSI Erfahrungs- und Forschungsbericht. (2022) . - S. 304-310.

2021

Weikert, Tim ; Tremmel, Stephan:
Amorphous Carbon Coatings for Sheet-Bulk Metal Forming Tools.
In: Merklein, Marion ; Tekkaya, A. Erman ; Behrens, Bernd-Arno (Hrsg.): Sheet Bulk Metal Forming : Research Results of the TCRC73. - Cham : Springer, 2021 . - S. 192-215 . - (Lecture Notes in Production Engineering )
DOI: https://doi.org/10.1007/978-3-030-61902-2_9

Rosnitschek, Tobias ; Veigl, Bianca ; Alber-Laukant, Bettina ; Erber, Maximilian ; Rieg, Frank ; Tremmel, Stephan ; Volk, Wolfram:
Optimierung von Metamodell Hyperparametern für die Anpassung an ingenieurtechnische Probleme.
2021
Veranstaltung: 19. Gemeinsames Kolloquium Konstruktionstechnik , 29.09. - 30.09.2021 , Duisburg.
(Veranstaltungsbeitrag: Kongress/Konferenz/Symposium/Tagung , Vortrag )

Kormann, Andreas ; Kleinschrodt, Claudia ; Tremmel, Stephan:
Sensordatengewinnung mit simulationsgestützten virtuellen Sensoren auf Basis der Finite-Elemente-Analyse.
2021
Veranstaltung: 19. Gemeinsames Kolloquium Konstruktionstechnik , 29.09.-30.09.2021 , Duisburg.
(Veranstaltungsbeitrag: Kongress/Konferenz/Symposium/Tagung , Vortrag )

Siegel, Tobias ; Baier, Maximilian ; Kleinschrodt, Claudia ; Tremmel, Stephan:
Verknüpfung von Tools zur analytischen Berechnung von Maschinensystemen in einer Digital Engineering Toolbox.
2021
Veranstaltung: 19. Gemeinsames Kolloquium Konstruktionstechnik , 29.09-30.09.2021 , Duisburg.
(Veranstaltungsbeitrag: Kongress/Konferenz/Symposium/Tagung , Vortrag )

Volltext
Glamsch, Johannes ; Hüter, Florian ; Tremmel, Stephan:
Automatisierte Simulation von Sandwichbauteilen mit Z88Aurora®.
2021
Veranstaltung: 22. Bayreuther 3D-Konstrukteurstag 2021 , 15.09.2021 , digital.
(Veranstaltungsbeitrag: Kongress/Konferenz/Symposium/Tagung , Vortrag )

Volltext
Hüter, Florian:
Easy Sandwich Struktur Berechner (ESSBe).
2021
Veranstaltung: 22. Bayreuther 3D-Konstrukteurstag 2021 , 15.09.2021 , digital.
(Veranstaltungsbeitrag: Kongress/Konferenz/Symposium/Tagung , Vortrag )

Orgeldinger, Christian ; Tremmel, Stephan:
Tribologische Kontakte verstehen und optimieren : Ein numerischer Ansatz zur Berechnung hochbelasteter TEHD-Kontakte.
2021
Veranstaltung: 22. Bayreuther 3D-Konstrukteurstag 2021 , 15.09.2021 , digital.
(Veranstaltungsbeitrag: Kongress/Konferenz/Symposium/Tagung , Vortrag )

Marian, Max ; Tremmel, Stephan:
Current Trends and Applications of Machine Learning in Tribology : A Review.
In: Lubricants. Bd. 9 (1 September 2021) Heft 9 . - No. 86.
DOI: https://doi.org/10.3390/lubricants9090086

Orgeldinger, Christian ; Tremmel, Stephan:
Transient EHL-simulation of a cam-tappet contact considering edge effects and roughness influence.
2021
Veranstaltung: 4th young tribological researcher symposium (YTRS) , 8.6.2021 , Online.
(Veranstaltungsbeitrag: Kongress/Konferenz/Symposium/Tagung , Vortrag )

Gerschütz, Benjamin ; Sauer, Christopher ; Wallisch, Anne ; Mehlstäubl, Jan ; Kormann, Andreas ; Schleich, Benjamin ; Alber-Laukant, Bettina ; Paetzold, Kristin ; Rieg, Frank ; Wartzack, Sandro:
Towards Customized Digital Engineering : Herausforderungen und Potentiale bei der Anpassung von Digital Engineering Methoden für den Produktentwicklungsprozess.
In: Binz, Hansgeorg ; Bertsche, Bernd ; Spath, Dieter ; Roth, Daniel (Hrsg.): Stuttgarter Symposium für Produktentwicklung SSP 2021. - Stuttgart : Fraunhofer-Institut für Arbeitswirtschaft und Organisation IAO, 2021 . - S. 93-104
DOI: https://doi.org/10.18419/opus-11478

Mohr, Johannes ; Rieg, Frank:
Austauschdateiformate - Hintergrund und Verbesserungspotentiale.
2021
Veranstaltung: GDTE Mitgliederversammlung 2021 , 10.03.2021 , Online.
(Veranstaltungsbeitrag: Kongress/Konferenz/Symposium/Tagung , Vortrag )

Schwarz, Sebastian ; Grillenberger, Hannes ; Tremmel, Stephan ; Wartzack, Sandro:
Investigations on the rolling bearing cage dynamics with regard to different operating conditions and cage properties.
2021
Veranstaltung: Antriebstechnisches Kolloquium ATK 2021 , 09.-11. März 2021 , Digital.
(Veranstaltungsbeitrag: Kongress/Konferenz/Symposium/Tagung , Paper )

Rothammer, Benedict ; Marian, Max ; Rummel, Florian ; Schröder, Stefan ; Uhler, Maximilian ; Kretzer, J. Philippe ; Tremmel, Stephan ; Wartzack, Sandro:
Rheological behavior of an artificial synovial fluid : influence of temperature, shear rate and pressure.
In: Journal of the Mechanical Behavior of Biomedical Materials. Bd. 115 (März 2021) . - No. 104278.
DOI: https://doi.org/10.1016/j.jmbbm.2020.104278

Weikert, Tim ; Wartzack, Sandro ; Baloglu, Maximilian Volkan ; Willner, Kai ; Gabel, Stefan ; Merle, Benoit ; Pineda, Fabiola ; Walczak, Magdalena ; Marian, Max ; Rosenkranz, Andreas ; Tremmel, Stephan:
Evaluation of the surface fatigue behavior of amorphous carbon coatings through cyclic nanoindentation.
In: Surface and Coatings Technology. Bd. 407 (Februar 2021) . - No. 126769.
DOI: https://doi.org/10.1016/j.surfcoat.2020.126769

Roppel, Matthias ; Lange, Christopher ; Roith, Bernd ; Rieg, Frank:
Accelerated Parameterized computation of the Thermal Behaviour of Dual Purpose casks.
In: Proceedings of the Design Society. Bd. 1 (2021) . - S. 313-322.
DOI: https://doi.org/10.1017/pds.2021.32

Rosnitschek, Tobias ; Schütt, Thomas Peter ; Alber-Laukant, Bettina:
Analyse der Maßhaltigkeit im Atomic Diffusion Additive Manufacturing für Metallische Bauteile.
In: Eiber, Marion (Hrsg.): 6. Tagung des Arbeitskreises Additiv gefertigte Bauteile und Strukturen. - Berlin : DVM e.V., 2021 . - S. 9-18

Volltext
Rosnitschek, Tobias ; Glamsch, Johannes ; Lange, Christopher ; Alber-Laukant, Bettina ; Rieg, Frank:
An Automated Open-Source Approach for Debinding Simulation in Metal Extrusion Additive Manufacturing.
In: Designs. Bd. 5 (2021) Heft 1 . - 2.
DOI: https://doi.org/10.3390/designs5010002

Rosnitschek, Tobias ; Kleinschrodt, Claudia ; Tremmel, Stephan ; Rieg, Frank:
Automatisierte Entwicklung bionischer Strukturen für die Additive Fertigung.
In: Jahresmagazin Werkstofftechnik : Ingenieurwissenschaften. (2021) . - S. 50-53.

Volltext
Rosnitschek, Tobias ; Erber, Maximilian ; Hartmann, Christoph ; Volk, Wolfram ; Rieg, Frank ; Tremmel, Stephan:
Combining Structural Optimization and Process Assurance in Implicit Modelling for Casting Parts.
In: Materials. Bd. 14 (2021) Heft 13 . - 3715.
DOI: https://doi.org/10.3390/ma14133715

Volltext
Rosnitschek, Tobias ; Seefeldt, Andressa ; Alber-Laukant, Bettina ; Neumeyer, Thomas ; Altstädt, Volker ; Tremmel, Stephan:
Correlations of Geometry and Infill Degree of Extrusion Additively Manufactured 316L Stainless Steel Components.
In: Materials. Bd. 14 (2021) Heft 18 . - 5173.
DOI: https://doi.org/10.3390/ma14185173

Kormann, Andreas ; Kleinschrodt, Claudia ; Tremmel, Stephan:
Erweiterung des Nutzens von Sensordaten durch Verwendung in simulationsgestützten virtuellen Sensoren auf Basis der Finite-Elemente-Analyse.
In: Krause, Dieter ; Paetzold, Kristin ; Wartzack, Sandro (Hrsg.): Proceedings of the 32nd Symposium Design for X (DFX2021). - Tutzing , 2021
DOI: https://doi.org/10.35199/dfx2021.03

Pezold, Daniel ; Rosnitschek, Tobias ; Kleuderlein, Andre ; Döpper, Frank ; Alber-Laukant, Bettina:
Evaluation of Technologies for the Fabrication of Continuous Fiber Reinforced Thermoplastic Parts by Fused Layer Modeling.
In: Dröder, Klaus ; Vietor, Thomas (Hrsg.): Technologies for economic and functional lightweight design. - Berlin : Springer, 2021 . - S. 125-141 . - (Zukunftstechnologien für den multifunktionalen Leichtbau ; 11 )
DOI: https://doi.org/10.1007/978-3-662-62924-6_11

Volltext
Lange, Christopher ; Barthelmäs, Patrick ; Rosnitschek, Tobias ; Tremmel, Stephan ; Rieg, Frank:
Impact of HPC and Automated CFD Simulation Processes on Virtual Product Development : A Case Study.
In: Applied Sciences. Bd. 11 (2021) . - 6552.
DOI: https://doi.org/10.3390/app11146552

Orgeldinger, Christian ; Wohlgemuth, Florian ; Hausotte, Tino:
Influence of Continuous Scan Mode and Workpiece Positioning on Dimensional Measurements with Computed Tomography.
In: Gerlach, Gerald ; Sommer, Klaus--Dieter (Hrsg.): Proceedings SMSI 2021 Conference : Sensor and Measurement Science International Digital Conference. - Wunstorf : AMA Service, 2021 . - S. 277-278
DOI: https://doi.org/10.5162/SMSI2021/D8.2

Volltext
Glamsch, Johannes ; Rosnitschek, Tobias ; Rieg, Frank:
Initial Population Influence on Hypervolume Convergence of NSGA-III.
In: International Journal of Simulation Modelling. Bd. 20 (2021) Heft 1 . - S. 123-133.
DOI: https://doi.org/10.2507/IJSIMM20-1-549

Lange, Christopher ; Tremmel, Stephan ; Rieg, Frank:
Integration von High-Performance-Computing in die simulationsunterstütze Produktentwicklung.
In: Konstruktion. Bd. 73 (2021) Heft 6 . - S. 69-74.
DOI: https://doi.org/10.37544/0720-5953-2021-06-69

Jüttner, Michael ; Tremmel, Stephan ; Correns, Martin ; Koch, Oliver ; Wartzack, Sandro:
Ein Kommentar zum mehrachsigen Spannungszustand im reibungsfrei überrollten Kontakt elastischer Körper und zur Anwendung von Vergleichsspannungshypothesen.
In: Tribologie und Schmierungstechnik. Bd. 68 (2021) Heft 2 . - S. 7-13.
DOI: https://doi.org/10.24053/TuS-2021-0009

Volltext
Seynstahl, Armin ; Krauß, Sebastian ; Bitzek, Erik ; Meyer, Bernd ; Merle, Benoit ; Tremmel, Stephan:
Microstructure, Mechanical Properties and Tribological Behavior of Magnetron-Sputtered MoS₂ Solid Lubricant Coatings Deposited under Industrial Conditions.
In: Coatings. Bd. 11 (2021) Heft 4 . - 455.
DOI: https://doi.org/10.3390/coatings11040455

Jüttner, Michael ; Wartzack, Sandro ; Bartz, Marcel ; Tremmel, Stephan ; Correns, Martin:
Eine Näherungsmethode zur schnellen Simulation von mehrfach überrollten elasto-plastischen Kontakten in Wälzlagern.
In: VDI Wissensforum (Hrsg.): 14. VDI-Tagung Gleit- und Wälzlagerungen 2021 : Gestaltung – Berechnung – Einsatz. - Düsseldorf : VDI-Verlag, 2021 . - S. 197-206 . - (VDI-Berichte ; 2378 )

Marian, Max ; Orgeldinger, Christian ; Rothammer, Benedict ; Bartz, Marcel ; Tremmel, Stephan ; Wartzack, Sandro:
On Lubrication Mechanisms in Total Knee Replacements.
In: Gesellschaft für Tribologie e.V. (Hrsg.): 62. Tribologie-Fachtagung : Reibung, Schmierung und Verschleiß ; Forschung und praktische Anwendungen. - Online , 2021 . - S. 1-12

Volltext
Rosnitschek, Tobias ; Hentschel, Rick ; Siegel, Tobias ; Kleinschrodt, Claudia ; Zimmermann, Markus ; Alber-Laukant, Bettina ; Rieg, Frank:
Optimized One-Click Development for Topology-Optimized Structures.
In: Applied Sciences. Bd. 11 (2021) Heft 5 . - 2400.
DOI: https://doi.org/10.3390/app11052400

Siegel, Tobias ; Kormann, Andreas ; Sauer, Christopher ; Sendlbeck, Stefan ; Kleinschrodt, Claudia ; Schleich, Benjamin ; Otto, Michael ; Tremmel, Stephan ; Wartzack, Sandro ; Stahl, Karsten:
Semantisches Datenmanagement für Softwaretools in der digitalen Produktentwicklung.
In: Rieg, Frank ; Tremmel, Stephan (Hrsg.): 22. Bayreuther 3D-Konstrukteurstag. - Bayreuth , 2021

Grohmann, Peter ; Walter, Michael S. J.:
Speeding up Statistical Tolerance Analysis to Real Time.
In: Applied Sciences. Bd. 11 (2021) Heft 9 . - 4207.
DOI: https://doi.org/10.3390/app11094207

Marian, Max ; Feile, Klara ; Rothammer, Benedict ; Bartz, Marcel ; Wartzack, Sandro ; Seynstahl, Armin ; Tremmel, Stephan ; Krauß, Sebastian ; Merle, Benoit ; Böhm, Thomas ; Wang, Bo ; Wyatt, Brian C. ; Anasori, Babak ; Rosenkranz, Andreas:
Ti₃C₂Tₓ solid lubricant coatings in rolling bearings with remarkable performance beyond state-of-the-art materials.
In: Applied Materials Today. Bd. 25 (2021) . - 101202.
DOI: https://doi.org/10.1016/j.apmt.2021.101202

Nečas, David ; Vrbka, Martin ; Marian, Max ; Rothammer, Benedict ; Tremmel, Stephan ; Wartzack, Sandro ; Galandáková, Adéla ; Gallo, Jiří ; Wimmer, Markus A. ; Křupka, Ivan ; Hartl, Martin:
Towards the understanding of lubrication mechanisms in total knee replacements. Part I. Experimental investigations.
In: Tribology International. Bd. 156 (2021) . - 106874.
DOI: https://doi.org/10.1016/j.triboint.2021.106874

Marian, Max ; Orgeldinger, Christian ; Rothammer, Benedict ; Nečas, David ; Vrbka, Martin ; Křupka, Ivan ; Hartl, Martin ; Wimmer, Markus A. ; Tremmel, Stephan ; Wartzack, Sandro:
Towards the understanding of lubrication mechanisms in total knee replacements. Part II. Numerical modeling.
In: Tribology International. Bd. 156 (2021) . - 106809.
DOI: https://doi.org/10.1016/j.triboint.2020.106809

Volltext

2020

Wittmann, Johannes ; Schweigert, Daniel ; Billenstein, Daniel ; Glenk, Christian ; Otto, Michael ; Stahl, Karsten ; Rieg, Frank:
Berücksichtigung der Lagerovalisierung und Belastung von elastischen Gehäusestrukturen in der Getriebeauslegung am Beispiel von RIKOR, FVA 711 II.
2020
Veranstaltung: FVA-Informationstagung 2020 : das Online-Netzwerktreffen , 30.11. - 4.12.2020 , Online.
(Veranstaltungsbeitrag: Kongress/Konferenz/Symposium/Tagung , Vortrag )

Volltext
Mohr, Johannes ; Kleinschrodt, Claudia ; Diwisch, Pascal:
Betrachtung von Konfigurationsdateiformaten und GUI-Frameworks für Programme zur Aufbereitung von Austauschdateien.
In: Corves, Burkhard ; Gericke, Kilian ; Grote, Karl-Heinrich ; Lohrengel, Armin ; Löwer, Manuel ; Nagarajah, Arun ; Rieg, Frank ; Scharr, Gerhard ; Stelzer, Ralf (Hrsg.): 18. Gemeinsames Kolloquium Konstruktionstechnik 2020 : Nachhaltige Produktentwicklung ; KT 2020. - Duisburg , 2020 . - S. 309-320
DOI: https://doi.org/10.17185/duepublico/73094

Volltext
Rosnitschek, Tobias ; Siegel, Tobias ; Linke, David ; Mailänder, Philippa ; Kamp, Dominik ; Rieg, Frank:
Optimizing material exploitation in the direct additive manufacturing of topology-optimized structures.
In: Corves, Burkhard ; Gericke, Kilian ; Grote, Karl-Heinrich ; Lohrengel, Armin ; Lower, Manuel ; Nagarajah, Arun ; Rieg, Frank ; Scharr, Gerhard ; Stelzer, Ralf (Hrsg.): 18. Gemeinsames Kolloquium Konstruktionstechnik 2020: Nachhaltige Produktentwicklung ; KT 2020. - Duisburg , 2020 . - S. 27-39
DOI: https://doi.org/10.17185/duepublico/73094

Volltext
Lange, Christopher ; Zahn, Aljoscha ; Rosnitschek, Tobias ; Rieg, Frank:
Using the elimination method for automated dimensioning of interference fits by means of finite element analysis.
In: Corves, Burkhard ; Gericke, Kilian ; Grote, Karl-Heinrich ; Lohrengel, Armin ; Löwer, Manuel ; Nagarajah, Arun ; Rieg, Frank ; Scharr, Gerhard ; Stelzer, Ralf (Hrsg.): 18. Gemeinsames Kolloquium Konstruktionstechnik 2020: Nachhaltige Produktentwicklung ; KT 2020. - Duisburg , 2020 . - S. 41-54
DOI: https://doi.org/10.17185/duepublico/73094

Hofer, Michael ; Glenk, Christian ; Theling, Julian:
Dachprojekt Themenkomplex Planetenradverformung : Entwicklung von Berechnungsmethoden zur Berücksichtigung der Planetenradverformung.
2020
Veranstaltung: FVA-Informationstagung 2020 : das Online-Netzwerktreffen , 30.11. - 4.12.2020 , Online.
(Veranstaltungsbeitrag: Kongress/Konferenz/Symposium/Tagung , Vortrag )

Rosnitschek, Tobias ; Kleinschrodt, Claudia ; Alber-Laukant, Bettina ; Rieg, Frank ; Frisch, Michael:
Digitaler Workflow zur Entwicklung und Simulation optimierter Kinderfußprothesen.
2020
Veranstaltung: DVM-Arbeitskreis "Zuverlässigkeit von Implantaten und Biostrukturen" , 26.11.2020 , TU Berlin, Online.
(Veranstaltungsbeitrag: Kongress/Konferenz/Symposium/Tagung , Vortrag )

Volltext
Rieg, Frank ; Tremmel, Stephan ; Hüter, Florian:
Automatisierte FEA von Sandwichbauteilen.
In: News / Wissenschaftliche Gesellschaft für Produktentwicklung. (Oktober 2020) Heft 2 . - S. 3.

Jüttner, Michael ; Tremmel, Stephan ; Correns, Martin ; Koch, Oliver ; Wartzack, Sandro:
Ein Kommentar zum mehrachsigen Spannungszustand im reibungsfrei überrollten Kontakt elastischer Körper und zur Anwendung von Vergleichsspannungshypothesen.
2020
Veranstaltung: 61. Tribologie-Fachtagung 2020 , 28.-30.09.2020 , Göttingen (Online).
(Veranstaltungsbeitrag: Kongress/Konferenz/Symposium/Tagung , Paper )

Kügler, Patricia ; Marian, Max ; Schleich, Benjamin ; Tremmel, Stephan ; Wartzack, Sandro:
tribAIn : An ontology for knowledge representation in the domain of tribology.
2020
Veranstaltung: 61. Tribologie-Fachtagung 2020 , 28.-30.09.2020 , Göttingen (Online).
(Veranstaltungsbeitrag: Kongress/Konferenz/Symposium/Tagung , Paper )

Volltext
Roppel, Matthias ; Lange, Christopher ; Alber-Laukant, Bettina ; Tremmel, Stephan ; Rieg, Frank:
Further developments of the simulation tool Z88ENSI for the independent assessment of the thermal and mechanical dimensioning of transport and storage casks.
In: ENSI Erfahrungs- und Forschungsbericht. (2020) . - S. 259-265.

Wirsching, Sven ; Schwarz, Sebastian ; Tremmel, Stephan:
Use of analytically describable geometries to calculate the contact between rolling element face and rib in bearing simulations.
In: Tribologie und Schmierungstechnik. Bd. 67 (2020) Heft 3 . - S. 25-33.
DOI: https://doi.org/10.30419/TuS-2020-0015

2019

Volltext
Orgeldinger, Christian ; Wohlgemuth, Florian ; Müller, Andreas Michael ; Hausotte, Tino:
Spot size and detector unsharpness determination for numerical measurement uncertainty determination.
In: 9th Conference on Industrial Computed Tomography. - Bad Breisig : NDT.net, 2019

Diese Liste wurde am Tue Mar 19 00:01:31 2024 CET generiert.
[Zum Seitenanfang]
URL für die Einbettung dieser Seite in externe WWW-Seiten:
https://eref.uni-bayreuth.de/XML/divisions/160006-101.xml