Veröffentlichungen "Glatzel, Uwe"

Buch / Monografie

Wallmann, Clemens ; Laukant, Holger ; Glatzel, Uwe:
Thermisches Fügen für die stahlintensive Hybridbauweise im Fahrzeugleichtbau : (AVIF A 185).
Frankfurt : Verband der Automobilindustrie , 2006 . - (FAT-Schriftenreihe ; 200 )

Thüringer Werkstofftag 2002.
Hrsg.: Schnapp, Jürgen Dieter ; Glatzel, Uwe ; Jandt, Klaus D. ; Knake, Harald
Berlin : Köster , 2002
ISBN 3-89574-473-5

Glatzel, Uwe:
Microstructure and Internal Strains of Undeformed and Creep Deformed Samples of a Nickel-Base Superalloy.
Berlin : Köster , 1994 . - 80 S.
ISBN 978-3-929937-91-6

Glatzel, Uwe:
Untersuchung zur Hochtemperaturbelastung einkristalliner Nickelbasislegierungen mit hohem Anteil an gamma' Phase : Berechnung elastischer Spannungen und elektronenmikroskopische Untersuchung der Mikrostruktur.
Berlin : Technische Universität , 1990 . - 105 S.

Artikel in einer Zeitschrift

Dickes, Daniel ; Zhao, Yujun ; Baier, Felix ; Öztürk, Beyza ; Völkl, Rainer ; Li, Tong ; Galetz, Mathias C. ; Glatzel, Uwe:
Influence of oxygen ingress on microstructure and phase formation during two-step oxidation surface hardening of TiZrNbHfTa high entropy alloy.
In: Applied Physics Letters. Bd. 124 (2024) Heft 7 . - 071903.
ISSN 1077-3118
DOI: https://doi.org/10.1063/5.0190771

Müller, Moritz ; Böttger, Bernd ; Schleifer, Felix ; Fleck, Michael ; Glatzel, Uwe:
3D Minimum Channel Width Distribution in a Ni Base Superalloy.
In: Integrating Materials and Manufacturing Innovation. Bd. 12 (2023) . - S. 27-40.
ISSN 2193-9772
DOI: https://doi.org/10.1007/s40192-022-00290-3

Yesilcicek, Y. ; Haas, Sebastian ; Suárez Ocaño, P. ; Zaiser, E. ; Hesse, R. ; Többens, D. M. ; Glatzel, Uwe ; Manzoni, Anna M.:
Controlling Lattice Misfit and Creep Rate Through the γ' Cube Shapes in the Al₁₀Co₂₅Cr₈Fe₁₅Ni₃₆Ti₆ Compositionally Complex Alloy with Hf and W Additions.
In: High Entropy Alloys & Materials. Bd. 1 (2023) . - S. 134-142.
ISSN 2731-5827
DOI: https://doi.org/10.1007/s44210-022-00009-1

Schleifer, Felix ; Lin, Yueh-Yu ; Glatzel, Uwe ; Fleck, Michael:
The Elastic Effect of Evolving Precipitate Shapes on the Ripening Kinetics of Tetragonal Phases.
In: Metallurgical and Materials Transactions A. Bd. 54 (2023) Heft 5 . - S. 1843-1856.
ISSN 1543-1940
DOI: https://doi.org/10.1007/s11661-022-06877-x

Chen, Dehua ; Daoud, Haneen ; Dörflinger, Thomas ; Näser, Peter ; Smuda, Ute ; Herlan, Jürgen ; Glatzel, Uwe:
Simulation assisted design and manufacturing of anode for the hard chrome plating of components with complex geometry.
In: Surface and Coatings Technology. Bd. 455 (2023) . - 129178.
ISSN 1879-3347
DOI: https://doi.org/10.1016/j.surfcoat.2022.129178

Dickes, Daniel ; Öztürk, Beyza ; Baier, Felix ; Berger, Pascal ; George, Easo P. ; Völkl, Rainer ; Galetz, Mathias C. ; Glatzel, Uwe:
Surface hardening of TiZrNbHfTa high entropy alloy via oxidation.
In: Corrosion Science. Bd. 217 (2023) . - 111159.
ISSN 0010-938X
DOI: https://doi.org/10.1016/j.corsci.2023.111159

Rosenkranz, Laura ; Feuerbacher, Michael ; Gadelmeier, Christian ; Schleifer, Felix ; Glatzel, Uwe:
Tensile behavior of hexagonal rare-earth-based low, medium, and high entropy alloys : Strengthening effect of configurational entropy.
In: Intermetallics. Bd. 155 (2023) . - 107835.
ISSN 0966-9795
DOI: https://doi.org/10.1016/j.intermet.2023.107835

Körber, Selina ; Fleck, Michael ; Völkl, Rainer ; Glatzel, Uwe:
Anisotropic Growth of the Primary Dendrite Arms in a Single-Crystal Thin-Walled Nickel-Based Superalloy.
In: Advanced Engineering Materials. Bd. 24 (2022) Heft 6 . - 2101332.
ISSN 1527-2648
DOI: https://doi.org/10.1002/adem.202101332

Schleifer, Felix ; Müller, Moritz ; Lin, Yueh-Yu ; Holzinger, Markus ; Glatzel, Uwe ; Fleck, Michael:
Consistent Quantification of Precipitate Shapes and Sizes in Two and Three Dimensions Using Central Moments.
In: Integrating Materials and Manufacturing Innovation. Bd. 11 (2022) Heft 2 . - S. 159-171.
ISSN 2193-9772
DOI: https://doi.org/10.1007/s40192-022-00259-2

Redka, David ; Winter, Jan ; Gadelmeier, Christian ; Djuranovic, Alexander ; Glatzel, Uwe ; Minár, Ján ; Huber, Heinz Paul:
Control of ultrafast laser ablation efficiency by stress confinement due to strong electron localization in high-entropy alloys.
In: Applied Surface Science. Bd. 594 (2022) . - 153427.
ISSN 1873-5584
DOI: https://doi.org/10.1016/j.apsusc.2022.153427

Gadelmeier, Christian ; Yang, Ying ; Glatzel, Uwe ; George, Easo P.:
Creep strength of refractory high-entropy alloy TiZrHfNbTa and comparison with Ni-base superalloy CMSX-4.
In: Cell Reports Physical Science. Bd. 3 (2022) Heft 8 . - 100991.
ISSN 2666-3864
DOI: https://doi.org/10.1016/j.xcrp.2022.100991

Körber, Selina ; Wolff-Goodrich, Silas ; Völkl, Rainer ; Glatzel, Uwe:
Effect of Wall Thickness and Surface Conditions on Creep Behavior of a Single-Crystal Ni-Based Superalloy.
In: Metals. Bd. 12 (2022) Heft 7 . - 1081.
ISSN 2075-4701
DOI: https://doi.org/10.3390/met12071081

Lo, Kai-Chi ; Murakami, Hideyuki ; Glatzel, Uwe ; Yeh, Jien-Wei ; Gorsse, Stéphane ; Yeh, An-Chou:
Elemental effects on the oxidation of refractory compositionally complex alloys.
In: International Journal of Refractory Metals and Hard Materials. Bd. 108 (2022) . - 105918.
ISSN 0263-4368
DOI: https://doi.org/10.1016/j.ijrmhm.2022.105918

Dickes, Daniel ; Öztürk, Beyza ; Völkl, Rainer ; Galetz, Mathias ; Glatzel, Uwe:
Improving the Adhesion of a Hard Oxide Layer on Ti6Al4V by a Three-Step Thermal Oxidation Process.
In: Advanced Engineering Materials. Bd. 24 (2022) Heft 3 . - 2100864.
ISSN 1527-2648
DOI: https://doi.org/10.1002/adem.202100864

Hilzenthaler, Marius ; Scherm, Florian ; Daoud, Haneen ; Glatzel, Uwe:
In-situ decarburization and deoxidation during laser powder bed fusion of water-atomized steel C35.
In: Powder Technology. Bd. 412 (2022) . - 117973.
ISSN 0032-5910
DOI: https://doi.org/10.1016/j.powtec.2022.117973

Öztürk, Beyza ; Mengis, L. ; Dickes, Daniel ; Glatzel, Uwe ; Galetz, Mathias:
Influence of Water Vapor and Temperature on the Oxide Scale Growth and Alpha-Case Formation in Ti-6Al-4V Alloy.
In: Oxidation of Metals. Bd. 97 (2022) . - S. 241-260.
ISSN 1573-4889
DOI: https://doi.org/10.1007/s11085-021-10088-x

Mosbacher, Mike ; Hilzenthaler, Marius ; Galetz, Mathias ; Glatzel, Uwe:
Oxygen Diffusion Hardened Zirconium Alloy ZrNb7 : Tribological Properties Derived from Calo Wear and Wheel on Flat Experiments.
In: Tribology International. Bd. 165 (2022) . - 107304.
ISSN 0301-679X
DOI: https://doi.org/10.1016/j.triboint.2021.107304

Lee, Chi-Hung ; Chin, Hsu-Hsuan ; Zeng, Kun-Yuan ; Chang, Yao-Jen ; Yeh, An-Chou ; Yeh, Jien-Wei ; Lin, Su-Jien ; Wang, Chun-Chieh ; Glatzel, Uwe ; Huang, E-Wen:
Tailoring Ferrimagnetic Transition Temperatures, Coercivity Fields, and Saturation Magnetization by Modulating Mn Concentration in (CoCrFeNi)₁₋ₓMnₓ High-Entropy Alloys.
In: Frontiers in Materials. Bd. 9 (2022) . - 824285.
ISSN 2296-8016
DOI: https://doi.org/10.3389/fmats.2022.824285

Liu, Che-Jen ; Gadelmeier, Christian ; Lu, Shao-Lun ; Yeh, Jien-Wei ; Yen, Hung-Wei ; Gorsse, Stéphane ; Glatzel, Uwe ; Yeh, An-Chou:
Tensile creep behavior of HfNbTaTiZr refractory high entropy alloy at elevated temperatures.
In: Acta Materialia. Bd. 237 (2022) . - 118188.
ISSN 1359-6454
DOI: https://doi.org/10.1016/j.actamat.2022.118188

Inui, Haruyuki ; Kishida, Kyosuke ; Li, Le ; Manzoni, Anna M. ; Haas, Sebastian ; Glatzel, Uwe:
Uniaxial Mechanical Properties of Face-Centered Cubic Single- and Multiphase High-Entropy Alloys.
In: MRS Bulletin. Bd. 47 (2022) Heft 2 . - S. 168-174.
ISSN 0883-7694
DOI: https://doi.org/10.1557/s43577-022-00280-y

Zhang, Jingfeng ; Gadelmeier, Christian ; Sen, Sandipan ; Wang, Rui ; Zhang, Xi ; Zhong, Yu ; Glatzel, Uwe ; Grabowski, Blazej ; Wilde, Gerhard ; Divinski, Sergiy V.:
Zr diffusion in BCC refractory high entropy alloys: A case of "non-sluggish" diffusion behavior.
In: Acta Materialia. Bd. 233 (2022) . - 117970.
ISSN 1359-6454
DOI: https://doi.org/10.1016/j.actamat.2022.117970

Gottwalt, Albin ; Kubaschinski, Paul ; Waltz, Manuela ; Glatzel, Uwe ; Tetzlaff, Ulrich:
An Experimental Setup for Fatigue Testing of Thin Electrical Steel Sheets.
In: International Journal of Fatigue. Bd. 162 (2022) . - 106987.
ISSN 0142-1123
DOI: https://doi.org/10.1016/j.ijfatigue.2022.106987

Chen, Zhenghao ; Kishida, Kyosuke ; Inui, Haruyuki ; Heilmaier, Martin ; Glatzel, Uwe ; Eggeler, Gunther:
Improving the Intermediate- and High-Temperature Strength of L1₂-Co₃(Al,W) by Ni and Ta Additions.
In: Acta Materialia. Bd. 238 (2022) . - 118224.
ISSN 1359-6454
DOI: https://doi.org/10.1016/j.actamat.2022.118224

Körber, Selina ; Völkl, Rainer ; Glatzel, Uwe:
3D printed polymer positive models for the investment casting of extremely thin-walled single crystals.
In: Journal of Materials Processing Technology. Bd. 293 (2021) . - 117095.
ISSN 0924-0136
DOI: https://doi.org/10.1016/j.jmatprotec.2021.117095

Hilzenthaler, Marius ; Bifano, Luca ; Scherm, Florian ; Fischerauer, Gerhard ; Seemann, Andrea ; Glatzel, Uwe:
Characterization of recycled AISI 904L superaustenitic steel powder and influence on selective laser melted parts.
In: Powder Technology. Bd. 391 (2021) . - S. 57-68.
ISSN 0032-5910
DOI: https://doi.org/10.1016/j.powtec.2021.06.011

Ulrich, Anke Silvia ; Glatzel, Uwe ; Galetz, Mathias C.:
Discontinuities in Oxidation Kinetics : A New Model and its Application to Cr–Si-Base Alloys.
In: Oxidation of Metals. Bd. 95 (2021) Heft 5 . - S. 445-465.
ISSN 1573-4889
DOI: https://doi.org/10.1007/s11085-021-10029-8

Taheriniya, Shabnam ; Davani, Farnaz A. ; Hilke, Sven ; Hepp, Marco ; Gadelmeier, Christian ; Chellali, Mohammed Reda ; Boll, Torben ; Rösner, Harald ; Peterlechner, Martin ; Gammer, Christoph ; Divinski, Sergiy V. ; Butz, Benjamin ; Glatzel, Uwe ; Hahn, Horst ; Wilde, Gerhard:
High entropy alloy nanocomposites produced by high pressure torsion.
In: Acta Materialia. Bd. 208 (2021) . - 116714.
ISSN 1359-6454
DOI: https://doi.org/10.1016/j.actamat.2021.116714

Firlus, Konstantin ; Völkl, Rainer ; Gabel, Johannes ; Glatzel, Uwe:
The Influence of Cr, Al, Co, Fe and C on Negative Creep of Waspaloy.
In: International Journal of Materials Research. Bd. 112 (2021) Heft 2 . - S. 90-97.
ISSN 1862-5282
DOI: https://doi.org/10.1515/ijmr-2020-7980

Haas, Sebastian ; Manzoni, Anna M. ; Holzinger, Markus ; Glatzel, Uwe:
Influence of high melting elements on microstructure, tensile strength and creep resistance of the compositionally complex alloy Al₁₀Co₂₅Cr₈Fe₁₅Ni₃₆Ti₆.
In: Materials Chemistry and Physics. Bd. 274 (2021) . - 125163.
ISSN 0254-0584
DOI: https://doi.org/10.1016/j.matchemphys.2021.125163

Mosbacher, Mike ; Holzinger, Markus ; Galetz, Mathias ; Glatzel, Uwe:
The Influence of Oxide Color on the Surface Characteristics of Zirconium Alloy ZrNb₇ (wt%) After Different Heat Treatments.
In: Oxidation of Metals. Bd. 95 (2021) Heft 5 . - S. 377-388.
ISSN 1573-4889
DOI: https://doi.org/10.1007/s11085-021-10030-1

Manzoni, Anna M. ; Dubois, Felix ; Mousa, Marwan S. ; von Schlippenbach, Christoph ; Többens, Daniel M. ; Yesilcicek, Yasemin ; Zaiser, Erika ; Hesse, René ; Haas, Sebastian ; Glatzel, Uwe:
On the Formation of Eutectics in Variations of the Al₁₀Co₂₅Cr₈Fe₁₅Ni₃₆Ti₆ Compositionally Complex Alloy.
In: Metallurgical and Materials Transactions A. Bd. 52 (2021) Heft 1 . - S. 143-150.
ISSN 1543-1940
DOI: https://doi.org/10.1007/s11661-020-06091-7

Glatzel, Uwe ; Schleifer, Felix ; Gadelmeier, Christian ; Krieg, Fabian ; Müller, Moritz ; Mosbacher, Mike ; Völkl, Rainer:
Quantification of Solid Solution Strengthening and Internal Stresses through Creep Testing of Ni-Containing Single Crystals at 980°C.
In: Metals. Bd. 11 (2021) Heft 7 . - 1130.
ISSN 2075-4701
DOI: https://doi.org/10.3390/met11071130

Lin, Yueh-Yu ; Schleifer, Felix ; Holzinger, Markus ; Ta, Na ; Skrotzki, Birgit ; Kamachali, Reza Darvishi ; Glatzel, Uwe ; Fleck, Michael:
Quantitative Shape-Classification of Misfitting Precipitates during Cubic to Tetragonal Transformations : Phase-Field Simulations and Experiments.
In: Materials. Bd. 14 (2021) Heft 6 . - 1373.
ISSN 1996-1944
DOI: https://doi.org/10.3390/ma14061373

Ta, Na ; Umer Bilal, Muhammad ; Häusler, Ines ; Saxena, Alaukik ; Lin, Yueh-Yu ; Schleifer, Felix ; Fleck, Michael ; Glatzel, Uwe ; Skrotzki, Birgit ; Darvishi Kamachali, Reza:
Simulation of the θ’ Precipitation Process with Interfacial Anisotropy Effects in Al-Cu Alloys.
In: Materials. Bd. 14 (2021) Heft 5 . - 1280.
ISSN 1996-1944
DOI: https://doi.org/10.3390/ma14051280

Redka, David ; Gadelmeier, Christian ; Winter, Jan ; Spellauge, Maximilian ; Eulenkamp, Constanze ; Calta, Pavel ; Glatzel, Uwe ; Minár, Ján ; Huber, Heinz P.:
Sub-picosecond single-pulse laser ablation of the CrMnFeCoNi high entropy alloy and comparison to stainless steel AISI 304.
In: Applied Surface Science. Bd. 544 (2021) . - 148839.
ISSN 1873-5584
DOI: https://doi.org/10.1016/j.apsusc.2020.148839

Pfizenmaier, Petra ; Ulrich, Anke Silvia ; Galetz, Mathias C. ; Glatzel, Uwe:
Tensile creep properties of Cr-Si Alloys at 980 °C in air : Influence of Ge and Mo addition.
In: Metals. Bd. 11 (2021) Heft 7 . - 1072.
ISSN 2075-4701
DOI: https://doi.org/10.3390/met11071072

Wolff-Goodrich, Silas ; Haas, Sebastian ; Glatzel, Uwe ; Liebscher, Christian H.:
Towards superior high temperature properties in low density ferritic AlCrFeNiTi compositionally complex alloys.
In: Acta Materialia. Bd. 216 (2021) . - 117113.
ISSN 1359-6454
DOI: https://doi.org/10.1016/j.actamat.2021.117113

Mora-García, Alma G. ; Mosbacher, Mike ; Hastreiter, Julia ; Völkl, Rainer ; Glatzel, Uwe ; Muñoz-Saldaña, Juan:
Creep behavior of polycrystalline and single crystal Ni-based superalloys coated with Ta-containing NiCoCrAlY by high-velocity oxy-fuel spraying.
In: Scripta Materialia. Bd. 178 (2020) . - S. 522-526.
ISSN 1359-6462
DOI: https://doi.org/10.1016/j.scriptamat.2019.12.023

Pfizenmaier, Petra ; Ulrich, Anke Silvia ; Galetz, Mathias C. ; Glatzel, Uwe:
Determination of heat treatment parameters by experiments and CALPHAD for precipitate hardening of Cr-Alloys with Si, Ge and Mo.
In: Intermetallics. Bd. 116 (2020) . - 106636.
ISSN 0966-9795
DOI: https://doi.org/10.1016/j.intermet.2019.106636

Zaiser, Erika ; Zhou, X. Y. ; Manzoni, Anna M. ; Haas, Sebastian ; Glatzel, Uwe ; Zhang, X. P. ; Thompson, G. B. ; Li, W. ; Vogel, F.:
Hierarchical phase separation behavior in a Ni-Si-Fe alloy.
In: Acta Materialia. Bd. 195 (2020) . - S. 327-340.
ISSN 1359-6454
DOI: https://doi.org/10.1016/j.actamat.2020.05.023

Ulrich, Anke Silvia ; Pfizenmaier, Petra ; Solimani, Ali ; Glatzel, Uwe ; Galetz, Mathias:
Improving the oxidation resistance of Cr-Si-based alloys by ternary alloying.
In: Corrosion Science. Bd. 165 (2020) . - 108376.
ISSN 0010-938X
DOI: https://doi.org/10.1016/j.corsci.2019.108376

Lin, Yueh-Yu ; Schleifer, Felix ; Fleck, Michael ; Glatzel, Uwe:
On the interaction between γ′′ precipitates and dislocation microstructures in Nb containing single crystal nickel-base alloys.
In: Materials Characterization. Bd. 165 (2020) . - 110389.
ISSN 1044-5803
DOI: https://doi.org/10.1016/j.matchar.2020.110389

Schleifer, Felix ; Holzinger, Markus ; Lin, Yueh-Yu ; Glatzel, Uwe ; Fleck, Michael:
Phase-field modeling of γ/γ'' microstructure formation in Ni-based superalloys with high γ'' volume fraction.
In: Intermetallics. Bd. 120 (2020) . - 106745.
ISSN 0966-9795
DOI: https://doi.org/10.1016/j.intermet.2020.106745

Chen, Dehua ; Daoud, Haneen ; Scherm, Florian ; Klötzer, Bernd ; Hauck, Christoph ; Glatzel, Uwe:
Stainless Steel Powder Produced by a Novel Arc Spray Process.
In: Journal of Materials Research and Technology. Bd. 9 (2020) Heft 4 . - S. 8314-8322.
ISSN 2238-7854
DOI: https://doi.org/10.1016/j.jmrt.2020.05.076

Gadelmeier, Christian ; Haas, Sebastian ; Lienig, Tim ; Manzoni, Anna M. ; Feuerbacher, Michael ; Glatzel, Uwe:
Temperature Dependent Solid Solution Strengthening in the High Entropy Alloy CrMnFeCoNi in Single Crystalline State.
In: Metals. Bd. 10 (2020) Heft 11 . - 1412.
ISSN 2075-4701
DOI: https://doi.org/10.3390/met10111412

Manzoni, Anna M. ; Haas, Sebastian ; Kropf, Holger ; Duarte Correa, Jazmin Maria ; Cakir, Cafer Tufan ; Dubois, Felix ; Többens, Daniel M. ; Glatzel, Uwe:
Temperature evolution of lattice misfit in Hf and Mo variations of the Al₁₀Co₂₅Cr₈Fe₁₅Ni₃₆Ti₆ compositionally complex alloy.
In: Scripta Materialia. Bd. 188 (2020) . - S. 74-79.
ISSN 1359-6462
DOI: https://doi.org/10.1016/j.scriptamat.2020.07.013

Ulan kyzy, Sonun ; Völkl, Rainer ; Munz, Oliver ; Fischer, Tim ; Weizenbach, Sarah ; Glatzel, Uwe:
Thermo-physical properties of Hastelloy X and Haynes 214 close to the melting range.
In: Materials Science and Technology. Bd. 36 (2020) Heft 10 . - S. 1012-1019.
ISSN 1743-2847
DOI: https://doi.org/10.1080/02670836.2020.1753154

Popp, Robert ; Haas, Sebastian ; Scherm, Florian ; Redermeier, Alice ; Povoden-Karadeniz, Erwin ; Göhler, Thomas ; Glatzel, Uwe:
Determination of Solubility Limits of Refractory Elements in TCP Phases of the Ni-Mo-Cr Ternary System Using Diffusion Multiples.
In: Journal of Alloys and Compounds. Bd. 788 (2019) . - S. 67-74.
ISSN 0925-8388
DOI: https://doi.org/10.1016/j.jallcom.2019.01.329

Ulan kyzy, Sonun ; Völkl, Rainer ; Munz, Oliver ; Fischer, Tim ; Glatzel, Uwe:
The Effect of Brazing on Microstructure of Honeycomb Liner Material Hastelloy X.
In: Journal of Materials Engineering and Performance. Bd. 28 (2019) Heft 4 . - S. 1909-1913.
ISSN 1544-1024
DOI: https://doi.org/10.1007/s11665-019-03910-w

Manzoni, Anna M. ; Haas, Sebastian ; Yu, J. M. ; Daoud, Haneen ; Glatzel, Uwe ; Aboulfadl, Hisham ; Mücklich, Frank ; Duran, Rüya ; Schmitz, Guido ; Többens, Daniel M. ; Matsumura, Syo ; Vogel, Florian ; Wanderka, Nelia:
Evolution of γ/γ' phases, their misfit and volume fractions in Al₁₀Co₂₅Cr₈Fe₁₅Ni₃₆Ti₆ compositionally complex alloy.
In: Materials Characterization. Bd. 154 (2019) . - S. 363-376.
ISSN 1044-5803
DOI: https://doi.org/10.1016/j.matchar.2019.06.009

Manzoni, Anna M. ; Glatzel, Uwe:
New Multiphase Compositionally Complex Alloys Driven by the High Entropy Alloy Approach.
In: Materials Characterization. Bd. 147 (2019) . - S. 512-532.
ISSN 1044-5803
DOI: https://doi.org/10.1016/j.matchar.2018.06.036

Holzinger, Markus ; Schleifer, Felix ; Glatzel, Uwe ; Fleck, Michael:
Phase-field modeling of γ'-precipitate shapes in nickel-base superalloys and their classification by moment invariants.
In: The European Physical Journal B. Bd. 92 (2019) . - 208.
ISSN 1434-6036
DOI: https://doi.org/10.1140/epjb/e2019-100256-1

Haas, Sebastian ; Manzoni, Anna M. ; Krieg, Fabian ; Glatzel, Uwe:
Microstructure and Mechanical Properties of Precipitate Strengthened High Entropy Alloy Al₁₀Co₂₅Cr₈Fe₁₅Ni₃₆Ti₆ with Additions of Hafnium and Molybdenum.
In: Entropy. Bd. 21 (2019) Heft 2 . - 169.
ISSN 1099-4300
DOI: https://doi.org/10.3390/e21020169

Haas, Sebastian ; Mosbacher, Mike ; Senkov, Oleg N. ; Feuerbacher, Michael ; Freudenberger, Jens ; Gezgin, Senol ; Völkl, Rainer ; Glatzel, Uwe:
Entropy Determination of Single-Phase High Entropy Alloys with Different Crystal Structures over a Wide Temperature Range.
In: Entropy. Bd. 20 (2018) Heft 9 . - 654.
ISSN 1099-4300
DOI: https://doi.org/10.3390/e20090654

Kellner, Peter M. ; Völkl, Rainer ; Glatzel, Uwe:
Influence of Ingot and Powder Metallurgy Production Route on the Tensile Creep Behavior of Mo–9Si–8B Alloys with Additions of Al and Ge.
In: Advanced Engineering Materials. Bd. 20 (2018) Heft 1 . - 1700751.
ISSN 1527-2648
DOI: https://doi.org/10.1002/adem.201700751

Mora-García, Alma G. ; Ruíz-Luna, Haidee ; Mosbacher, Mike ; Popp, Robert ; Schulz, Uwe ; Glatzel, Uwe ; Muñoz-Saldaña, Juan:
Microstructural analysis of Ta-containing NiCoCrAlY bond coats deposited by HVOF on different Ni-based superalloys.
In: Surface and Coatings Technology. Bd. 354 (2018) . - S. 214-225.
ISSN 1879-3347
DOI: https://doi.org/10.1016/j.surfcoat.2018.09.025

Trosch, Tanja ; Lalire, Fanny ; Pommier, Stéphane ; Völkl, Rainer ; Glatzel, Uwe:
Optimization of a jewellery platinum alloy for precision casting : Evaluation of mechanical, microstructural and optical properties.
In: Johnson Matthey Technology Review. Bd. 62 (2018) Heft 4 . - S. 364-382.
ISSN 2056-5135
DOI: https://doi.org/10.1595/205651318X696837

Mosbacher, Mike ; Scherm, Florian ; Glatzel, Uwe:
Oxygen diffusion kinetics of an advanced three step heat treatment for zirconium alloy ZrNb7.
In: Surface and Coatings Technology. Bd. 339 (2018) . - S. 139-146.
ISSN 1879-3347
DOI: https://doi.org/10.1016/j.surfcoat.2018.02.015

Fleck, Michael ; Schleifer, Felix ; Holzinger, Markus ; Glatzel, Uwe:
Phase-Field Modeling of Precipitation Growth and Ripening During Industrial Heat Treatments in Ni-Base Superalloys.
In: Metallurgical and Materials Transactions A. Bd. 49 (2018) Heft 9 . - S. 4146-4157.
ISSN 1543-1940
DOI: https://doi.org/10.1007/s11661-018-4746-5

Kellner, Peter M. ; Dijkstra, Hans ; Glatzel, Uwe:
Quantitative analysis of Mo–Si–B alloy phases with wavelength dispersive spectroscopy (WDS–SEM).
In: X-Ray Spectrometry. Bd. 47 (2018) Heft 2 . - S. 153-158.
ISSN 1097-4539
DOI: https://doi.org/10.1002/xrs.2824

Ulrich, Anke Silvia ; Pfizenmaier, Petra ; Solimani, Ali ; Glatzel, Uwe ; Galetz, Mathias:
Strengthened Cr-Si-base alloys for high temperature applications.
In: International Journal of Refractory Metals and Hard Materials. Bd. 76 (2018) . - S. 72-81.
ISSN 0263-4368
DOI: https://doi.org/10.1016/j.ijrmhm.2018.05.016

Manzoni, Anna M. ; Haas, Sebastian ; Daoud, Haneen ; Glatzel, Uwe ; Förster, Christiane ; Wanderka, Nelia:
Tensile Behavior and Evolution of the Phases in the Al₁₀Co₂₅Cr₈Fe₁₅Ni₃₆Ti₆ Compositionally Complex/High Entropy Alloy.
In: Entropy. Bd. 20 (2018) Heft 9 . - 646.
ISSN 1099-4300
DOI: https://doi.org/10.3390/e20090646

Gabriel, Tobias ; Rommel, Daniel ; Scherm, Florian ; Gorywoda, Marek ; Glatzel, Uwe:
Laser Cladding of Ultra-Thin Nickel-Based Superalloy Sheets.
In: Materials. Bd. 10 (2017) Heft 3 . - 279.
ISSN 1996-1944
DOI: https://doi.org/10.3390/ma10030279

Wilhelm, Franz ; Affeldt, Ernst ; Fleischmann, Ernst ; Glatzel, Uwe ; Hammer, Joachim:
Modeling of the Deformation Behavior of Single Crystalline Nickel-Based Superalloys under Thermal Mechanical Loading.
In: International Journal of Fatigue. Bd. 97 (2017) . - S. 1-8.
ISSN 0142-1123
DOI: https://doi.org/10.1016/j.ijfatigue.2016.12.003

Fleck, Michael ; Querfurth, Frank ; Glatzel, Uwe:
Phase field modeling of solidification in multi-component alloys with a case study on the Inconel 718 alloy.
In: Journal of Materials Research. Bd. 32 (2017) Heft 24 . - S. 4605-4615.
ISSN 2044-5326
DOI: https://doi.org/10.1557/jmr.2017.393

Rommel, Daniel ; Terock, Michael ; Scherm, Florian ; Kuttner, Christian ; Glatzel, Uwe:
Direct metal deposition of abrasive tracks : Potentials concerning geometry and materials.
In: Journal of Laser Applications. Bd. 29 (2017) . - 022508.
ISSN 1938-1387
DOI: https://doi.org/10.2351/1.4983230

Fedoseeva, Alexandra ; Dudova, Nadya ; Glatzel, Uwe ; Kaibyshev, Rustam:
Effect of W on Tempering Behaviour of a 3 %Co Modified P92 Steel.
In: Journal of Materials Science. Bd. 51 (2016) Heft 20 . - S. 9424-9439.
ISSN 1573-4803
DOI: https://doi.org/10.1007/s10853-016-0188-x

Pérez-González, Francisco A. ; Ramírez-Ramírez, Javier H. ; Terock, Michael ; Garza-Montes-de-Oca, Nelson F. ; Glatzel, Uwe ; Colás, Rafael:
High-temperature Oxidation of a Nickel Base Superalloy at Different Oxygen Partial Pressures.
In: Corrosion Engineering, Science and Technology. Bd. 51 (2016) Heft 7 . - S. 513-521.
ISSN 1743-2782
DOI: https://doi.org/10.1080/1478422X.2016.1158226

Ladewig, Alexander ; Schlick, Georg ; Fisser, Maximilian ; Schulze, Volker ; Glatzel, Uwe:
Influence of the shielding gas flow on the removal of process by-products in the selective laser melting process.
In: Additive Manufacturing. Bd. 10 (2016) . - S. 1-9.
ISSN 2214-8604
DOI: https://doi.org/10.1016/j.addma.2016.01.004

Mertel, Robert ; Konrad, Christian ; Terock, Michael ; Völkl, Rainer ; Glatzel, Uwe:
Internal oxidation of ternary alloys forming a high oxygen conductive oxide.
In: Oxidation of Metals. Bd. 86 (2016) . - S. 193-203.
ISSN 1573-4889
DOI: https://doi.org/10.1007/s11085-016-9631-2

Rommel, Daniel ; Scherm, Florian ; Kuttner, Christian ; Glatzel, Uwe:
Laser cladding of diamond tools : interfacial reactions of diamond and molten metal.
In: Surface and Coatings Technology. Bd. 291 (2016) . - S. 62-69.
ISSN 1879-3347
DOI: https://doi.org/10.1016/j.surfcoat.2016.02.014

Trosch, Tanja ; Strößner, Johannes ; Völkl, Rainer ; Glatzel, Uwe:
Microstructure and Mechanical Properties of Selective Laser Melted Inconel 718 Compared to Forging and Casting.
In: Materials Letters. Bd. 164 (2016) . - S. 428-431.
ISSN 0167-577X
DOI: https://doi.org/10.1016/j.matlet.2015.10.136

Manzoni, Anna M. ; Singh, Sheela ; Daoud, Haneen ; Popp, Robert ; Völkl, Rainer ; Glatzel, Uwe ; Wanderka, Nelia:
On the Path to Optimizing the Al-Co-Cr-Cu-Fe-Ni-Ti High Entropy Alloy Family for High Temperature Applications.
In: Entropy. Bd. 18 (2016) Heft 4 . - 104.
ISSN 1099-4300
DOI: https://doi.org/10.3390/e18040104

Terock, Michael ; Konrad, Christian ; Popp, Robert ; Völkl, Rainer ; Yang, Fan ; McComb, David W. ; Mills, Michael J. ; Glatzel, Uwe:
Tailored platinum-nickel nanostructures on zirconia developed by metal casting, internal oxidation and dealloying.
In: Corrosion Science. Bd. 112 (2016) . - S. 246-254.
ISSN 0010-938X
DOI: https://doi.org/10.1016/j.corsci.2016.06.010

Schütz, Adelheid ; Völkl, Rainer ; Bölitz, Marie-Christin ; Glatzel, Uwe:
Corrosion of Platinum Alloy Electrodes in a LiO₂-Al2O₃-SiO₂ Melt.
In: European Journal of Glass Science and Technology Part A : Glass Technology. Bd. 56 (2015) Heft 3 . - S. 81-87.
ISSN 1753-3554

Azim, Maria A. ; Schliephake, Daniel ; Hochmuth, Christian ; Gorr, Bronislava ; Christ, Hans-Jürgen ; Glatzel, Uwe ; Heilmaier, Martin:
Creep Resistance and Oxidation Behavior of Novel Mo-Si-B-Ti Alloys.
In: JOM : the Journal of the Minerals, Metals & Materials Society. Bd. 67 (2015) Heft 11 . - S. 2621-2628.
ISSN 1543-1851
DOI: https://doi.org/10.1007/s11837-015-1560-z

Schütz, Adelheid ; Günthner, Martin ; Motz, Günter ; Greißl, Oliver ; Glatzel, Uwe:
High Temperature (Salt Melt) Corrosion Tests with Ceramic-Coated Steel.
In: Materials Chemistry and Physics. Bd. 159 (2015) . - S. 10-18.
ISSN 0254-0584
DOI: https://doi.org/10.1016/j.matchemphys.2015.03.023

Daoud, Haneen ; Manzoni, Anna M. ; Wanderka, Nelia ; Glatzel, Uwe:
High-Temperature Tensile Strength of Al₁0Co₂₅Cr₈Fe₁₅Ni₃₆Ti₆ Compositionally Complex Alloy (High-Entropy Alloy).
In: JOM : the Journal of the Minerals, Metals & Materials Society. Bd. 67 (2015) Heft 10 . - S. 2271-2277.
ISSN 1543-1851
DOI: https://doi.org/10.1007/s11837-015-1484-7

Fleischmann, Ernst ; Konrad, Christian ; Preußner, Johannes ; Völkl, Rainer ; Affeldt, Ernst ; Glatzel, Uwe:
Influence of Solid Solution Hardening on Creep Properties of Single-Crystal Nickel-Based Superalloys.
In: Metallurgical and Materials Transactions A. Bd. 46 (2015) . - S. 1125-1130.
ISSN 1543-1940
DOI: https://doi.org/10.1007/s11661-014-2727-x

Manzoni, Anna M. ; Daoud, Haneen ; Völkl, Rainer ; Glatzel, Uwe ; Wanderka, Nelia:
Influence of W, Mo and Ti Trace Elements on the Phase Separation in Al8Co17Cr17Cu8Fe17Ni33 based High Entropy Alloy.
In: Ultramicroscopy. Bd. 159 (2015) . - S. 265-271.
ISSN 0304-3991
DOI: https://doi.org/10.1016/j.ultramic.2015.06.009

Strößner, Johannes ; Terock, Michael ; Glatzel, Uwe:
Mechanical and Microstructural Investigation of Nickel Based Superalloy IN 718 Manufactured by Selective Laser Melting (SLM).
In: Advanced Engineering Materials. Bd. 17 (2015) Heft 8 . - S. 1099-1105.
ISSN 1527-2648
DOI: https://doi.org/10.1002/adem.201500158

Manzoni, Anna M. ; Singh, Sheela ; Daoud, Haneen ; Völkl, Rainer ; Glatzel, Uwe ; Wanderka, Nelia:
On the Optimization of the Microstructure and Mechanical Properties of Al-Co-Cr-Cu-Fe-Ni-Ti –Based High Entropy Alloys.
In: Jordan Journal of Physics. Bd. 8 (2015) Heft 3 . - S. 177-186.
ISSN 1994-7615

Daoud, Haneen ; Manzoni, Anna M. ; Wanderka, Nelia ; Glatzel, Uwe:
Oxidation Behavior of Al₈Co₁₇Cr₁₇Cu₈Fe₁₇Ni₃₃, Al₂₃Co₁₅Cr₂₃Cu₈Fe₁₅Ni₁₅ and ‎Al₁₇Co₁₇Cr₁₇Cu₁₇Fe₁₇Ni₁₇ Compositionally Complex Alloys (High Entropy Alloys) at ‎Elevated Temperatures in Air.
In: Advanced Engineering Materials. Bd. 17 (2015) Heft 8 . - S. 1134-1141.
ISSN 1527-2648
DOI: https://doi.org/10.1002/adem.201500179

Fleischmann, Ernst ; Miller, Michael K. ; Affeldt, Ernst ; Glatzel, Uwe:
Quantitative Experimental Determination of the Solid Solution Hardening Potential of Rhenium, Tungsten and Molybdenum in Single Crystal Nickel-Based Superalloys.
In: Acta Materialia. Bd. 87 (2015) . - S. 350-356.
ISSN 1359-6454
DOI: https://doi.org/10.1016/j.actamat.2014.12.011

Kinzel, Svenja ; Gabel, Johannes ; Völkl, Rainer ; Glatzel, Uwe:
Reasons for Volume Contraction after Long-Term Annealing of Waspaloy.
In: Advanced Engineering Materials. Bd. 17 (2015) Heft 8 . - S. 1106-1112.
ISSN 1527-2648
DOI: https://doi.org/10.1002/adem.201500159

Fuhrmann, Lars ; Konrad, Christian ; Völkl, Rainer ; Glatzel, Uwe:
Transition from Internal to External Oxidation in Binary Ni-Zr and Ternary Ni-Zr-Y Alloys.
In: Corrosion Science. Bd. 94 (2015) . - S. 218-223.
ISSN 0010-938X
DOI: https://doi.org/10.1016/j.corsci.2015.02.006

Liebscher, Christian H. ; Glatzel, Uwe:
Configuration of superdislocations in the γ′-Pt₃Al phase of a Pt-based superalloy.
In: Intermetallics. Bd. 48 (2014) . - S. 71-78.
ISSN 0966-9795
DOI: https://doi.org/10.1016/j.intermet.2013.12.006

Reif, Michael ; Scherm, Florian ; Galetz, Mathias ; Glatzel, Uwe:
An Enhanced Three-Step Oxidation Process to Improve Oxide Adhesion on Zirconium Alloys.
In: Oxidation of Metals. Bd. 82 (2014) . - S. 99-112.
ISSN 1573-4889
DOI: https://doi.org/10.1007/s11085-014-9479-2

Roy, U. ; Roy, Himadri ; Daoud, Haneen ; Glatzel, Uwe ; Ray, K. K.:
Fracture toughness and fracture micromechanism in a cast AlCoCrCuFeNi high entropy alloy system.
In: Materials Letters. Bd. 132 (2014) . - S. 186-189.
ISSN 0167-577X
DOI: https://doi.org/10.1016/j.matlet.2014.06.067

Albert, Benedikt ; Völkl, Rainer ; Glatzel, Uwe:
High-Temperature Oxidation Behavior of Two Nickel-Based Superalloys Produced by Metal Injection Molding for Aero Engine Applications.
In: Metallurgical and Materials Transactions A. Bd. 45 (2014) Heft 10 . - S. 4561-4571.
ISSN 1543-1940
DOI: https://doi.org/10.1007/s11661-014-2391-1

Hochmuth, Christian ; Schliephake, Daniel ; Völkl, Rainer ; Heilmaier, Martin ; Glatzel, Uwe:
Influence of zirconium content on microstructure and creep properties of Mo--9Si--8B alloys.
In: Intermetallics. Bd. 48 (2014) . - S. 3-9.
ISSN 0966-9795
DOI: https://doi.org/10.1016/j.intermet.2013.08.017

Konrad, Christian ; Völkl, Rainer ; Glatzel, Uwe:
A novel method for the preparation of porous zirconia ceramics with multimodal pore size distribution.
In: Journal of the European Ceramic Society. Bd. 34 (2014) Heft 5 . - S. 1311-1319.
ISSN 0955-2219
DOI: https://doi.org/10.1016/j.jeurceramsoc.2013.11.014

Strößner, Johannes ; Konrad, Christian ; Brunner, Martin ; Völkl, Rainer ; Glatzel, Uwe:
Influence of casting surface on creep behaviour of thin-wall Ni-base superalloy Inconel100.
In: Journal of Materials Processing Technology. Bd. 213 (2013) Heft 5 . - S. 722-727.
ISSN 0924-0136
DOI: https://doi.org/10.1016/j.jmatprotec.2012.11.024

Bensch, Matthias ; Konrad, Christian ; Fleischmann, Ernst ; Rae, Catherine M. F. ; Glatzel, Uwe:
Influence of oxidation on near-surface γ' fraction and resulting creep behaviour of single crystal Ni-base superalloy M247LC SX.
In: Materials Science and Engineering: A. Bd. 577 (2013) . - S. 179-188.
ISSN 1873-4936
DOI: https://doi.org/10.1016/j.msea.2013.04.032

Manzoni, Anna M. ; Daoud, Haneen ; Mondal, Swastik ; van Smaalen, Sander ; Völkl, Rainer ; Glatzel, Uwe ; Wanderka, Nelia:
Investigation of phases in Al₂₃Co₁₅Cr₂₃Cu₈Fe₁₅Ni₁₆ and Al₈Co₁₇Cr₁₇Cu₈Fe₁₇Ni₃₃ high entropy alloys and comparison with equilibrium phases predicted by Thermo-Calc.
In: Journal of Alloys and Compounds. Bd. 552 (2013) . - S. 430-436.
ISSN 0925-8388
DOI: https://doi.org/10.1016/j.jallcom.2012.11.074

Daoud, Haneen ; Manzoni, Anna M. ; Völkl, Rainer ; Wanderka, Nelia ; Glatzel, Uwe:
Microstructure and Tensile Behavior of Al8Co17Cr17Cu8Fe17Ni33 (at.%) High-Entropy Alloy.
In: JOM : the Journal of the Minerals, Metals & Materials Society. Bd. 65 (2013) Heft 12 . - S. 1805-1814.
ISSN 1543-1851
DOI: https://doi.org/10.1007/s11837-013-0756-3

Manzoni, Anna M. ; Daoud, Haneen ; Völkl, Rainer ; Glatzel, Uwe ; Wanderka, Nelia:
Phase separation in equiatomic AlCoCrFeNi high-entropy alloy.
In: Ultramicroscopy. Bd. 132 (2013) . - S. 212-215.
ISSN 0304-3991
DOI: https://doi.org/10.1016/j.ultramic.2012.12.015

Roy, Himadri ; Ray, Ayan ; Barat, K. ; Hochmuth, Christian ; Sivaprasad, S. ; Tarafder, S. ; Glatzel, Uwe ; Ray, K. K.:
Structural variations ahead of crack tip during monotonic and cyclic fracture tests of AISI 304LN stainless steel.
In: Materials Science and Engineering: A. Bd. 561 (2013) . - S. 88-99.
ISSN 1873-4936
DOI: https://doi.org/10.1016/j.msea.2012.10.074

Terock, Michael ; Fleischmann, Ernst ; Hochmuth, Christian ; Völkl, Rainer ; Glatzel, Uwe:
Synthesis and characterization of a Pt–Al–Cr–Ni γ/γ′-coating on the Ni-based superalloy CMSX‐4.
In: Surface and Coatings Technology. Bd. 236 (2013) . - S. 347-352.
ISSN 1879-3347
DOI: https://doi.org/10.1016/j.surfcoat.2013.10.011

Schütz, Adelheid ; Günthner, Martin ; Motz, Günter ; Greißl, Oliver ; Glatzel, Uwe:
Characterisation of novel precursor-derived ceramic coatings with glass filler particles on steel substrates.
In: Surface and Coatings Technology. Bd. 207 (2012) . - S. 319-327.
ISSN 1879-3347
DOI: https://doi.org/10.1016/j.surfcoat.2012.07.013

Konrad, Christian ; Völkl, Rainer ; Glatzel, Uwe:
Determination of Oxygen Diffusion Along Nickel/Zirconia Phase Boundaries by Internal Oxidation.
In: Oxidation of Metals. Bd. 77 (2012) Heft 3 . - S. 149-165.
ISSN 1573-4889
DOI: https://doi.org/10.1007/s11085-011-9278-y

Mukherji, Debashis ; Rösler, Joachim ; Krüger, Manja ; Heilmaier, Martin ; Bölitz, Marie-Christin ; Völkl, Rainer ; Glatzel, Uwe ; Szentmiklósi, L.:
The effects of boron addition on the microstructure and mechanical properties of Co-Re-based high-temperature alloys.
In: Scripta Materialia. Bd. 66 (2012) Heft 1 . - S. 60-63.
ISSN 1359-6462
DOI: https://doi.org/10.1016/j.scriptamat.2011.10.007

Burk, Steffen ; Gorr, Bronislava ; Christ, Hans-Jürgen ; Schliephake, Daniel ; Heilmaier, Martin ; Hochmuth, Christian ; Glatzel, Uwe:
High-temperature oxidation behaviour of a single-phase (Mo,Ti)5Si3 (Mo--Si--Ti) alloy.
In: Scripta Materialia. Bd. 66 (2012) Heft 5 . - S. 223-226.
ISSN 1359-6462
DOI: https://doi.org/10.1016/j.scriptamat.2011.10.042

Konrad, Christian ; Fuhrmann, Lars ; Völkl, Rainer ; Glatzel, Uwe:
Internal oxidation with significant contribution of oxygen diffusion through the oxide phase.
In: Corrosion Science. Bd. 63 (2012) . - S. 187-192.
ISSN 0010-938X
DOI: https://doi.org/10.1016/j.corsci.2012.06.003

Scherm, Florian ; Bezold, Johannes ; Glatzel, Uwe:
Laser welding of Mg alloy MgAl3Zn1 (AZ31) to Al alloy AlMg3 (AA5754) using ZnAl filler material.
In: Science and Technology of Welding and Joining. Bd. 17 (2012) Heft 5 . - S. 364-367.
ISSN 1362-1718
DOI: https://doi.org/10.1179/136217112X13333824902080

Bölitz, Marie-Christin ; Brunner, Martin ; Völkl, Rainer ; Mukherji, Debashis ; Rösler, Joachim ; Glatzel, Uwe:
Microstructural and analytical study of boron-doped Co-Re-Cr alloys using transmission electron microscopy and electron energy loss spectroscopy.
In: International Journal of Materials Research. Bd. 103 (2012) Heft 5 . - S. 554-558.
ISSN 1862-5282
DOI: https://doi.org/10.3139/146.110729

Bensch, Matthias ; Sato, Atrushi ; Warnken, Niels ; Affeldt, Ernst ; Reed, Roger C. ; Glatzel, Uwe:
Modelling of High Temperature Oxidation of Alumina-Forming Single-Crystal Nickel-Base Superalloys.
In: Acta Materialia. Bd. 60 (2012) Heft 15 . - S. 5468-5480.
ISSN 1359-6454
DOI: https://doi.org/10.1016/j.actamat.2012.06.036

Degenhardt, Ulrich ; Stegner, Frank ; Liebscher, Christian H. ; Glatzel, Uwe ; Berroth, Karl ; Motz, Günter ; Krenkel, Walter:
Sintered Silicon Nitride/Nano-Silicon Carbide Materials Based on Preceramic Polymers and Ceramic Powder.
In: Journal of the European Ceramic Society. Bd. 32 (2012) Heft 9 . - S. 1893-1899.
ISSN 0955-2219
DOI: https://doi.org/10.1016/j.jeurceramsoc.2011.09.007

Brunner, Martin ; Bensch, Matthias ; Völkl, Rainer ; Affeldt, Ernst ; Glatzel, Uwe:
Thickness influence on creep properties for Ni-based superalloy M247LC SX.
In: Materials Science and Engineering: A. Bd. 550 (2012) . - S. 254-262.
ISSN 1873-4936
DOI: https://doi.org/10.1016/j.msea.2012.04.067

Schmalz, Thomas ; Kraus, Tobias ; Günthner, Martin ; Liebscher, Christian H. ; Glatzel, Uwe ; Kempe, Rhett ; Motz, Günter:
Catalytic formation of carbon phases in metal modified, porous polymer derived SiCN ceramics.
In: Carbon. Bd. 49 (2011) Heft 9 . - S. 3065-3072.
ISSN 0008-6223
DOI: https://doi.org/10.1016/j.carbon.2011.03.027

Singh, Sheela ; Wanderka, Nelia ; Murty, B. S. ; Glatzel, Uwe ; Banhart, John:
Decomposition in multi-component AlCoCrCuFeNi high-entropy alloy.
In: Acta Materialia. Bd. 59 (2011) Heft 1 . - S. 182-190.
ISSN 1359-6454
DOI: https://doi.org/10.1016/j.actamat.2010.09.023

Konrad, Christian ; Brunner, Martin ; Kyrgyzbaev, Kanat ; Völkl, Rainer ; Glatzel, Uwe:
Determination of heat transfer coefficient and ceramic mold material parameters for alloy IN738LC investment castings.
In: Journal of Materials Processing Technology. Bd. 211 (2011) Heft 2 . - S. 181-186.
ISSN 0924-0136
DOI: https://doi.org/10.1016/j.jmatprotec.2010.08.031

Günthner, Martin ; Schütz, Adelheid ; Glatzel, Uwe ; Wang, Kaishi ; Bordia, Rajendra K. ; Greißl, Oliver ; Motz, Günter ; Krenkel, Walter:
High Performance Environmental Barrier Coatings, Part I: Passive Filler Loaded SiCN System for Steel.
In: Journal of the European Ceramic Society. Bd. 31 (2011) Heft 15 . - S. 3003-3010.
ISSN 0955-2219
DOI: https://doi.org/10.1016/j.jeurceramsoc.2011.05.027

Teichmann, Katharina ; Liebscher, Christian H. ; Völkl, Rainer ; Vorberg, Stefan ; Glatzel, Uwe:
High Temperature Strengthening Mechanisms in the Alloy Platinum-5% Rhodium DPH.
In: Platinum Metals Review. Bd. 55 (2011) Heft 4 . - S. 217-224.
ISSN 1471-0676
DOI: https://doi.org/10.1595/147106711X591971

Keller, Thomas F. ; Engelhardt, Hannes ; Adam, Peter ; Galetz, Mathias ; Glatzel, Uwe ; Jandt, Klaus D.:
Near-Surface Microstructural Reorganization of UHMWPE under Cyclic Load : A Pilot Study.
In: Advanced Engineering Materials. Bd. 13 (2011) Heft 12 . - B476-B482.
ISSN 1527-2648
DOI: https://doi.org/10.1002/adem.201180058

Franke, Martin M. ; Hilbinger, Rolf M. ; Konrad, Christian ; Glatzel, Uwe ; Singer, R. F.:
Numerical Determination of Secondary Dendrite Arm Spacing for IN738LC Investment Castings.
In: Metallurgical and Materials Transactions A. Bd. 42 (2011) Heft 7 . - S. 1847-1853.
ISSN 1543-1940
DOI: https://doi.org/10.1007/s11661-010-0585-8

Galetz, Mathias ; Fleischmann, Ernst ; Konrad, Christian ; Schütz, Adelheid ; Glatzel, Uwe:
Abrasion resistance of oxidized zirconium in comparison with CoCrMo and titanium nitride coatings for artificial knee joints.
In: Journal of Biomedical Materials Research Part B: Applied biomaterials. Bd. 93 (2010) Heft 1 . - S. 244-251.
ISSN 1552-4981
DOI: https://doi.org/10.1002/jbm.b.31581

Galetz, Mathias ; Glatzel, Uwe:
An activated energy approach for accelerated testing of the deformation of UHMWPE in artificial joints.
In: Journal of the Mechanical Behavior of Biomedical Materials. Bd. 3 (2010) Heft 4 . - S. 331-338.
ISSN 1878-0180
DOI: https://doi.org/10.1016/j.jmbbm.2010.01.004

Galetz, Mathias ; Uth, Tobias ; Wimmer, Markus A. ; Adam, Peter ; Glatzel, Uwe:
Determination of the temperature rise within UHMWPE tibial components during tribological loading.
In: Acta Biomaterialia. Bd. 6 (2010) Heft 2 . - S. 552-562.
ISSN 1878-7568
DOI: https://doi.org/10.1016/j.actbio.2009.06.023

Preußner, Johannes ; Fleischmann, Ernst ; Völkl, Rainer ; Glatzel, Uwe:
Enrichment of Boron at Grain Boundaries of Platinum-Based Alloys Determined by Electron Energy Loss Spectroscopy in a Transmission Electron Microscope.
In: International Journal of Materials Research. Bd. 101 (2010) Heft 5 . - S. 577-579.
ISSN 1862-5282
DOI: https://doi.org/10.3139/146.110320

Schütz, Michael R. ; Deeken, Stefan ; Adasch, Volker ; Liebscher, Christian H. ; Glatzel, Uwe ; Senker, Jürgen ; Breu, Josef ; Sattler, Katrin ; Klein, Otto:
Improvement of thermal and mechanical properties of a phenolic resin nanocomposite by in situ formation of silsesquioxanes from a molecular precursor.
In: Journal of Applied Polymer Science. Bd. 117 (2010) Heft 4 . - S. 2272-2277.
ISSN 1097-4628
DOI: https://doi.org/10.1002/app.32004

Nikulina, Elizaveta ; Völkl, Rainer ; Glatzel, Uwe:
Measurement of the Lattice Misfit of Pt-Al-Cr Superalloy by Convergent Beam Electron Diffraction (CBED).
In: International Journal of Materials Research. Bd. 101 (2010) Heft 5 . - S. 580-584.
ISSN 1862-5282
DOI: https://doi.org/10.3139/146.110311

Scherm, Florian ; Völkl, Rainer ; Neubrand, A. ; Bosbach, Franz ; Glatzel, Uwe:
Mechanical characterisation of interpenetrating network metal–ceramic composites.
In: Materials Science and Engineering: A. Bd. 527 (2010) Heft 4-5 . - S. 1260-1265.
ISSN 1873-4936
DOI: https://doi.org/10.1016/j.msea.2009.09.063

Nikulina, Elizaveta ; Durst, Karsten ; Göken, Mathias ; Völkl, Rainer ; Glatzel, Uwe:
Microstructural and Micromechanical Characterisation of a Pt-Al-Cr-Ni-Re Alloy by means of Transmission Electron Microscopy and Nanoindentation.
In: International Journal of Materials Research. Bd. 101 (2010) Heft 5 . - S. 585-588.
ISSN 1862-5282
DOI: https://doi.org/10.3139/146.110316

Bensch, Matthias ; Preußner, Johannes ; Hüttner, Rainer ; Obigodi, Georgia ; Sannakaisa, Virtanen ; Glatzel, Uwe ; Gabel, Johannes:
Modelling and analysis of the oxidation influence on creep behaviour of thin-walled structures of the single-crystal nickel-base superalloy René N5 at 980 °C.
In: Acta Materialia. Bd. 58 (2010) Heft 5 . - S. 1607-1617.
ISSN 1359-6454
DOI: https://doi.org/10.1016/j.actamat.2009.11.004

Galetz, Mathias ; Glatzel, Uwe:
Molecular Deformation Mechanisms in UHMWPE During Tribological Loading in Artificial Joints.
In: Tribology Letters. Bd. 38 (2010) Heft 1 . - S. 1-13.
ISSN 1023-8883
DOI: https://doi.org/10.1007/s11249-009-9563-y

Galetz, Mathias ; Seiferth, Sabine H. ; Theile, Benjamin ; Glatzel, Uwe:
Potential for adhesive wear in friction couples of UHMWPE running against oxidized zirconium, titanium nitride coatings, and cobalt-chromium alloys.
In: Journal of Biomedical Materials Research Part B: Applied biomaterials. Bd. 93 (2010) Heft 2 . - S. 468-475.
ISSN 1552-4981
DOI: https://doi.org/10.1002/jbm.b.31604

Brunner, Martin ; Hüttner, Rainer ; Bölitz, Marie-Christin ; Völkl, Rainer ; Mukherji, Debashis ; Rösler, Joachim ; Depka, Timo ; Somsen, Christoph ; Eggeler, Gunther ; Glatzel, Uwe:
Creep properties beyond 1100°C and microstructure of Co-Re-Cr alloys.
In: Materials Science and Engineering: A. Bd. 528 (2010) Heft 2 . - S. 650-656.
ISSN 1873-4936
DOI: https://doi.org/10.1016/j.msea.2010.09.035

Preußner, Johannes ; Prins, Sara ; Völkl, Rainer ; Liu, Zi-Kui ; Glatzel, Uwe:
Determination of phases in the system chromium-platinum (Cr-Pt) and thermodynamic calculations.
In: Materials Science and Engineering: A. Bd. 510-511 (2009) . - S. 322-327.
ISSN 1873-4936
DOI: https://doi.org/10.1016/j.msea.2008.10.059

Völkl, Rainer ; Wenderoth, Markus ; Preußner, Johannes ; Vorberg, Stefan ; Fischer, Bernd ; Yamabe-Mitarai, Y. ; Harada, H. ; Glatzel, Uwe:
Development of a precipitation-strengthened Pt-base superalloy.
In: Materials Science and Engineering: A. Bd. 510-511 (2009) . - S. 328-331.
ISSN 1873-4936
DOI: https://doi.org/10.1016/j.msea.2008.12.034

Preußner, Johannes ; Rudnik, Yegor ; Brehm, Holger ; Völkl, Rainer ; Glatzel, Uwe:
A dislocation density based material model to simulate the anisotropic creep behavior of single-phase and two-phase single crystals.
In: International Journal of Plasticity. Bd. 25 (2009) Heft 5 . - S. 973-994.
ISSN 0749-6419
DOI: https://doi.org/10.1016/j.ijplas.2008.04.006

Liebscher, Christian H. ; Völkl, Rainer ; Glatzel, Uwe:
Electron energy losses by channelling-enhanced microanalysis in a ɣ​'-strengthened Ni-base alloy with Ti additions.
In: Acta Materialia. Bd. 57 (2009) Heft 14 . - S. 4217-4223.
ISSN 1359-6454
DOI: https://doi.org/10.1016/j.actamat.2009.05.019

Galetz, Mathias ; Fleischmann, Ernst ; Glatzel, Uwe:
Femur materials for artificial knee joints : adhesive wear and potential for future developments.
In: Biomaterialien. Bd. 10 (2009) Heft 1-2 . - S. 45.
ISSN 2191-4672

Hüttner, Rainer ; Gabel, Johannes ; Glatzel, Uwe ; Völkl, Rainer:
First creep results on thin-walled single-crystal superalloys.
In: Materials Science and Engineering: A. Bd. 510-511 (2009) . - S. 307-311.
ISSN 1873-4936
DOI: https://doi.org/10.1016/j.msea.2008.10.057

Glatzel, Uwe ; Völkl, Rainer:
Metalle.
In: Jahresmagazin Ingenieurwissenschaften. (2009) .
ISSN 1865-1828

Heilmaier, Martin ; Krüger, Manja ; Saage, H. ; Rösler, Joachim ; Mukherji, Debashis ; Glatzel, Uwe ; Völkl, Rainer ; Hüttner, Rainer ; Eggeler, Gunther ; Somsen, Christoph ; Depka, Timo ; Christ, Hans-Jürgen ; Gorr, Bronislava ; Burk, Steffen:
Metallic Materials for Structural Applications Beyond Nickel-Based Superalloys.
In: JOM : the Journal of the Minerals, Metals & Materials Society. Bd. 61 (2009) Heft 7 . - S. 61-67.
ISSN 1543-1851
DOI: https://doi.org/10.1007/s11837-009-0106-7

Scherm, Florian ; Völkl, Rainer ; van Smaalen, Sander ; Mondal, Swastik ; Plamondon, Philippe ; L'Esperance, Gilles ; Bechmann, Florian ; Glatzel, Uwe:
Microstructural characterization of interpenetrating light weight metal matrix composites.
In: Materials Science and Engineering: A. Bd. 518 (2009) Heft 1-2 . - S. 118-123.
ISSN 1873-4936
DOI: https://doi.org/10.1016/j.msea.2009.04.010

Kunst, Martin ; Fischersworring-Bunk, Andreas ; L'Esperance, Gilles ; Plamondon, Philippe ; Glatzel, Uwe:
Microstructure and dislocation analysis after creep deformation of die-cast Mg-Al-Sr (AJ) alloy.
In: Materials Science and Engineering: A. Bd. 510-511 (2009) . - S. 387-392.
ISSN 1873-4936
DOI: https://doi.org/10.1016/j.msea.2008.07.078

Schütz, Adelheid ; Müller, Dieter ; Reichert, P. ; Glatzel, Uwe:
Partial Laser and Gas Nitriding of Titanium Components.
In: HTM Journal of Heat Treatment and Materials. Bd. 64 (2009) Heft 5 . - S. 270-277.
ISSN 0341-101x
DOI: https://doi.org/10.3139/105.110034

Liebscher, Christian H. ; Preußner, Johannes ; Völkl, Rainer ; Glatzel, Uwe:
Atomic site location by channelling enhanced microanalysis (ALCHEMI) in γ′-strengthened Ni- and Pt-base alloys.
In: Acta Materialia. Bd. 56 (2008) Heft 16 . - S. 4267-4276.
ISSN 1359-6454
DOI: https://doi.org/10.1016/j.actamat.2008.04.044

Preußner, Johannes ; Prins, Sara ; Wenderoth, Markus ; Völkl, Rainer ; Glatzel, Uwe:
Building a Thermodynamic Database for Platinum-Based Superalloys: Part III.
In: Platinum Metals Review. Bd. 52 (2008) Heft 1 . - S. 48-51.
ISSN 1471-0676
DOI: https://doi.org/10.1595/147106708X255167

Preußner, Johannes ; Völkl, Rainer ; Glatzel, Uwe:
Creep 2008: 11th International Conference on Creep and Fracture of Engineering Materials and Structures.
In: Platinum Metals Review. Bd. 52 (2008) Heft 4 . - S. 241-242.
ISSN 1471-0676
DOI: https://doi.org/10.1595/147106708X363888

Rudnik, Yegor ; Völkl, Rainer ; Vorberg, Stefan ; Glatzel, Uwe:
The effects of Ta additions on the phase compositions and high temperature properties of Pt base alloys.
In: Materials Science and Engineering: A. Bd. 479 (2008) Heft 1-2 . - S. 306-312.
ISSN 1873-4936
DOI: https://doi.org/10.1016/j.msea.2007.06.066

Völkl, Rainer ; Fischer, Bernd ; Beschliesser, Manuel ; Glatzel, Uwe:
Evaluating strength at ultra-high temperatures - methods and results.
In: Materials Science and Engineering: A. Bd. 483-484 (2008) . - S. 587-589.
ISSN 1873-4936
DOI: https://doi.org/10.1016/j.msea.2006.09.171

Wenderoth, Markus ; Vorberg, Stefan ; Fischer, Bernd ; Yamabe-Mitarai, Y. ; Harada, H. ; Glatzel, Uwe ; Völkl, Rainer:
Influence of Nb, Ta and Ti on microstructure and high-temperature strength of precipitation-hardened Pt-base alloys.
In: Materials Science and Engineering: A. Bd. 483-484 (2008) . - S. 509-511.
ISSN 1873-4936
DOI: https://doi.org/10.1016/j.msea.2006.12.160

Cornish, Lesley A. ; Süss, Rainer ; Watson, Andy ; Preußner, Johannes ; Prins, Sara ; Wenderoth, Markus ; Völkl, Rainer ; Glatzel, Uwe:
Building a database for the prediction of phases in Pt-based superalloys.
In: Journal of the Southern African Institute of Mining and Metallurgy. Bd. 107 (2007) . - S. 713-724.
ISSN 0038-223X

Galetz, Mathias ; Blaß, T. ; Ruckdäschel, Holger ; Sandler, Jan K. W. ; Altstädt, Volker ; Glatzel, Uwe:
Carbon nanofibre-reinforced ultrahigh molecular weight polyethylene for tribological applications.
In: Journal of Applied Polymer Science. Bd. 104 (2007) Heft 6 . - S. 4173-4181.
ISSN 1097-4628
DOI: https://doi.org/10.1002/app.26058

Wloka, J. ; Laukant, Holger ; Glatzel, Uwe ; Virtanen, S.:
Corrosion properties of laser beam joints of aluminium with zinc-coated steel.
In: Corrosion Science. Bd. 49 (2007) Heft 11 . - S. 4243-4258.
ISSN 0010-938X
DOI: https://doi.org/10.1016/j.corsci.2007.04.014

Schrinner, Marc C. ; Polzer, Frank ; Mei, Yu ; Lu, Yan ; Haupt, Björn ; Ballauff, Matthias ; Göldel, Astrid ; Drechsler, Markus ; Preussner, Johannes ; Glatzel, Uwe:
Cover: Macromolecular Chemistry and Physics 208 (2007) Issue 14.
In: Macromolecular Chemistry and Physics. Bd. 208 (2007) Heft 14 . - S. 1485.
ISSN 1521-3935
DOI: https://doi.org/10.1002/macp.200790028

Galetz, Mathias ; Goetz, C. ; Adam, Peter ; Glatzel, Uwe:
Hysteretic Heating During Cyclic Loading of Medical Grade Ultra High Molecular Weight Polyethylene (UHMWPE).
In: Advanced Engineering Materials. Bd. 9 (2007) Heft 12 . - S. 1089-1096.
ISSN 1527-2648
DOI: https://doi.org/10.1002/adem.200700274

Wenderoth, Markus ; Vorberg, Stefan ; Fischer, Bernd ; Völkl, Rainer ; Glatzel, Uwe:
Isothermal Oxidation Behavior of a Precipitation-Hardened Pt-Base Alloy with Additions of Al, Cr and Ni.
In: International Journal of Materials Research. Bd. 98 (2007) Heft 6 . - S. 463-467.
ISSN 1862-5282
DOI: https://doi.org/10.3139/146.101498

Schrinner, Marc C. ; Polzer, Frank ; Mei, Yu ; Lu, Yan ; Haupt, Björn ; Ballauff, Matthias ; Grödel, Astrid ; Drechsler, Markus ; Preußner, Johannes ; Glatzel, Uwe:
Mechanism of the Formation of Amorphous Gold Nanoparticles within Spherical Polyelectrolyte Brushes.
In: Macromolecular Chemistry and Physics. Bd. 208 (2007) Heft 14 . - S. 1542-1547.
ISSN 1521-3935
DOI: https://doi.org/10.1002/macp.200700161

Wenderoth, Markus ; Völkl, Rainer ; Vorberg, Stefan ; Yamabe-Mitarai, Y. ; Harada, H. ; Glatzel, Uwe:
Microstructure, oxidation resistance and high-temperature strength of γ′ hardened Pt-base alloys.
In: Intermetallics. Bd. 15 (2007) Heft 4 . - S. 539-549.
ISSN 0966-9795
DOI: https://doi.org/10.1016/j.intermet.2006.09.009

Zambaldi, C. ; Roters, F. ; Raabe, D. ; Glatzel, Uwe:
Modeling and experiments on the indentation deformation and recrystallization of a single-crystal nickel-base superalloy.
In: Materials Science and Engineering: A. Bd. 454-455 (2007) . - S. 433-440.
ISSN 1873-4936
DOI: https://doi.org/10.1016/j.msea.2006.11.068

Cornish, Lesley A. ; Süss, Rainer ; Völkl, Rainer ; Wenderoth, Markus ; Vorberg, Stefan ; Fischer, Bernd ; Glatzel, Uwe ; Douglas, Alistair ; Chown, Lesley H. ; Murakumo, T. ; Preußner, Johannes ; Lupton, David ; Glaner, Lesley ; Maledi, N. B. ; Potgieter, J. H. ; Sephton, M. ; Williams, G.:
Overview of the development of new Pt-based alloys for high temperature application in aggressive environments.
In: Journal of the Southern African Institute of Mining and Metallurgy. Bd. 107 (2007) . - S. 697-711.
ISSN 0038-223X

Reissig, Lutz ; Czubayko, Ulrich ; Wanderka, Nelia ; Völkl, Rainer ; Glatzel, Uwe:
Comparison of oxide measurement techniques applied to Ti6Al4V.
In: Materials Characterization. Bd. 55 (2005) Heft 2 . - S. 153-159.
ISSN 1044-5803
DOI: https://doi.org/10.1016/j.matchar.2005.05.001

Preußner, Johannes ; Rudnik, Yegor ; Völkl, Rainer ; Glatzel, Uwe:
Finite-element modelling of anisotropic single-crystal superalloy creep deformation based on dislocation densities of individual slip systems.
In: Zeitschrift für Metallkunde. Bd. 96 (2005) Heft 6 . - S. 595-601.
ISSN 2195-8556
DOI: https://doi.org/10.3139/146.101076

Laukant, Holger ; Wallmann, Clemens ; Korte, Michael ; Glatzel, Uwe:
Flux-less joining technique of aluminium with zinc-coated steel sheets by a dual-spot-laser beam.
In: Advanced Materials Research. Bd. 6-8 (2005) . - S. 163-170.
ISSN 1662-8985
DOI: https://doi.org/10.4028/www.scientific.net/AMR.6-8.163

Laukant, Holger ; Wallmann, Clemens ; Müller, Markus ; Glatzel, Uwe ; Korte, Michael ; Stirn, Boris ; Haldenwanger, Hans-Günther:
Fluxless laser beam joining of aluminium with zinc coated steel.
In: Science and Technology of Welding and Joining. Bd. 10 (2005) Heft 2 . - S. 219-226.
ISSN 1362-1718
DOI: https://doi.org/10.1179/174329305X37051

Wenderoth, Markus ; Cornish, Lesley A. ; Süss, Rainer ; Vorberg, Stefan ; Fischer, Bernd ; Glatzel, Uwe ; Völkl, Rainer:
On the Development and Investigation of Quaternary Pt-Based Superalloys with Ni Additions.
In: Metallurgical and Materials Transactions A. Bd. 36 (2005) Heft 3 . - S. 567-575.
ISSN 1543-1940
DOI: https://doi.org/10.1007/s11661-005-0171-7

Hüller, Markus ; Wenderoth, Markus ; Vorberg, Stefan ; Fischer, Bernd ; Glatzel, Uwe ; Völkl, Rainer:
Optimization of Composition and Heat Treatment of Age-Hardened Pt-Al-Cr-Ni Alloys.
In: Metallurgical and Materials Transactions A. Bd. 36 (2005) Heft 13 . - S. 681-689.
ISSN 1543-1940
DOI: https://doi.org/10.1007/s11661-005-1000-8

Müller, Markus ; Wallmann, Clemens ; Laukant, Holger ; Glatzel, Uwe:
Prozesstoleranzen des flussmittelfreien Laserstrahlschweißlötens.
In: Schweißen und Schneiden. Bd. 57 (2005) Heft 6 . - S. 250-255.
ISSN 0036-7184

Vorberg, Stefan ; Wenderoth, Markus ; Fischer, Bernd ; Glatzel, Uwe ; Völkl, Rainer:
A TEM investigation of the ɣ/ɣ' phase boundary in Pt-based superalloys.
In: JOM : the Journal of the Minerals, Metals & Materials Society. Bd. 57 (2005) Heft 3 . - S. 49-51.
ISSN 1543-1851
DOI: https://doi.org/10.1007/s11837-005-0233-8

Altstädt, Volker ; Glatzel, Uwe ; Krenkel, Walter:
Fahren und Fliegen mit neuen Werkstoffen : oder lassen sich Leichtbau und hohe Temperaturen koppeln?
In: Spektrum. (2004) Heft 2 . - S. 18-21.

Kloss, Bärbel ; Wenderoth, Markus ; Glatzel, Uwe ; Völkl, Rainer:
Fast internal oxidation of Ni-Zr-Y alloys at low Oxygen pressure.
In: Oxidation of Metals. Bd. 61 (2004) Heft 3-4 . - S. 239-251.
ISSN 1573-4889
DOI: https://doi.org/10.1023/B:OXID.0000025333.36579.b9

Wallmann, Clemens ; Glatzel, Uwe:
Herstellung und Eigenschaften von laserbeschichteten Diamanttrennschleifscheiben (Teil 1).
In: Industrie-Diamanten-Rundschau. Bd. 38 (2004) Heft 3 . - S. 283-292.
ISSN 0935-1469

Wallmann, Clemens ; Glatzel, Uwe:
Herstellung und Eigenschaften von laserbeschichteten Diamanttrennschleifscheiben (Teil 2).
In: Industrie-Diamanten-Rundschau. Bd. 38 (2004) Heft 4 . - S. 392-402.
ISSN 0935-1469

Reissig, Lutz ; Völkl, Rainer ; Mills, Michael J. ; Glatzel, Uwe:
Investigation of near surface structure in order to determine process-temperatures during different machining processes of Ti6Al4V.
In: Scripta Materialia. Bd. 50 (2004) Heft 1 . - S. 121-126.
ISSN 1359-6462
DOI: https://doi.org/10.1016/j.scriptamat.2003.09.023

Vorberg, Stefan ; Wenderoth, Markus ; Fischer, Bernd ; Glatzel, Uwe ; Völkl, Rainer:
Pt-Al-Cr-Ni Superalloys: Heat Treatment and Microstructure.
In: JOM : the Journal of the Minerals, Metals & Materials Society. Bd. 56 (2004) Heft 9 . - S. 40-43.
ISSN 1543-1851
DOI: https://doi.org/10.1007/s11837-004-0199-y

Koubassov, V. ; Laprise, J. F. ; Théberge, F. ; Förster, E. ; Sauerbrey, Roland ; Müller, B. ; Glatzel, Uwe ; Chin, S. L.:
Ultrafast laser-induced melting of glass.
In: Applied Physics A. Bd. 79 (2004) Heft 3 . - S. 499-505.
ISSN 1432-0630
DOI: https://doi.org/10.1007/s00339-003-2474-0

Gorelik, Tatiana ; Urban, Sabine ; Falk, Fritz ; Kaiser, Ute ; Glatzel, Uwe:
Carbon onions produced by laser irradiation of amorphous silicon carbide.
In: Chemical Physics Letters. Bd. 373 (2003) Heft 5-6 . - S. 642-645.
ISSN 1873-4448
DOI: https://doi.org/10.1016/S0009-2614(03)00677-8

Wöllmer, Silke ; Zaefferer, Stefan ; Göken, Mathias ; Mack, Thomas ; Glatzel, Uwe:
Characterization of phases of aluminized nickel base superalloys.
In: Surface and Coatings Technology. Bd. 167 (2003) Heft 1 . - S. 83-96.
ISSN 1879-3347
DOI: https://doi.org/10.1016/S0257-8972(02)00843-5

Reissig, Lutz ; Czubayko, Ulrich ; Wanderka, Nelia ; Völkl, Rainer ; Glatzel, Uwe:
Determination of the local Oxygen distribution in a commercial Titanium alloy by 3-dimensional atom probe.
In: Zeitschrift für Metallkunde. Bd. 94 (2003) Heft 6 . - S. 771-773.
ISSN 2195-8556

Gorelik, Tatiana ; Will, M. ; Nolte, S. ; Tünnermann, A. ; Glatzel, Uwe:
Transmission electron microscopy studies of femtosecond laser induced modifications in quartz.
In: Applied Physics A. Bd. 76 (2003) . - S. 309-311.
ISSN 1432-0630
DOI: https://doi.org/10.1007/s00339-002-1813-x

Schubert, Christian ; Kaiser, Ute ; Hedler, A. ; Wesch, Werner ; Gorelik, Tatiana ; Glatzel, Uwe ; Kräußlich, J. ; Wunderlich, B. ; Hess, G. ; Goetz, K.:
Nanocrystal formation in SiC by Ge ion implantation and subsequent thermal annealing.
In: Journal of Applied Physics. Bd. 91 (2002) Heft 3 . - S. 1520-1524.
ISSN 1089-7550
DOI: https://doi.org/10.1063/1.1430539

Zaefferer, Stefan ; Glatzel, Uwe:
Orientation Relationship of Phases in an Oxidation Protection Coating on a Ni-Based Superalloy Single Crystal.
In: Materials Science Forum. Bd. 408-412 (2002) . - S. 1531-1536.
ISSN 1662-9752
DOI: https://doi.org/10.4028/www.scientific.net/MSF.408-412.1531

Schubert, Christian ; Wesch, Werner ; Kaiser, Ute ; Hedler, A. ; Gärtner, K. ; Gorelik, Tatiana ; Glatzel, Uwe:
Synthesis of group IV nanocrystals in SiC by ion beam processing.
In: Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms. Bd. 191 (2002) Heft 1-4 . - S. 428-432.
ISSN 1872-9584
DOI: https://doi.org/10.1016/S0168-583X(02)00586-4

Gorelik, Tatiana ; Kaiser, Ute ; Schubert, Christian ; Wesch, Werner ; Glatzel, Uwe:
Transmission electron microscopy study of Ge implanted into SiC.
In: Journal of Materials Research. Bd. 17 (2002) Heft 2 . - S. 479-486.
ISSN 2044-5326
DOI: https://doi.org/10.1557/JMR.2002.0067

Wöllmer, Silke ; Mack, Thomas ; Glatzel, Uwe:
Influence of tungsten and rhenium concentration on creep properties of a second generation superalloy.
In: Materials Science and Engineering: A. Bd. 319-321 (2001) . - S. 792-795.
ISSN 1873-4936
DOI: https://doi.org/10.1016/S0921-5093(01)01063-2

Siebörger, Dieter ; Brehm, Holger ; Wunderlich, F. ; Möller, D. ; Glatzel, Uwe:
Temperature dependence of lattice parameter, misfit and thermal expansion coefficient of matrix, ɣ' phase and superalloy.
In: Zeitschrift für Metallkunde. Bd. 92 (2001) . - S. 58-61.
ISSN 2195-8556

Siebörger, Dieter ; Knake, Harald ; Glatzel, Uwe:
Temperature dependence of the elastic moduli of the nickel-base superalloy CMSX-4 and its isolated phases.
In: Materials Science and Engineering: A. Bd. 298 (2001) Heft 1-2 . - S. 26-33.
ISSN 1873-4936
DOI: https://doi.org/10.1016/S0921-5093(00)01318-6

Glock, Karin ; Knobloch, Carola ; Glatzel, Uwe:
Creep properties of Ni₃(AlTiTa) γ′ phase single crystals.
In: Metallurgical and Materials Transactions A. Bd. 31 (2000) Heft 7 . - S. 1733-1740.
ISSN 1543-1940
DOI: https://doi.org/10.1007/s11661-998-0330-8

Brehm, Holger ; Glatzel, Uwe:
Material model describing the orientation dependent creep behavior of single crystals based on dislocation densities of slip systems.
In: International Journal of Plasticity. Bd. 15 (1999) Heft 3 . - S. 285-298.
ISSN 0749-6419
DOI: https://doi.org/10.1016/S0749-6419(98)00071-0

Siebörger, Dieter ; Glatzel, Uwe:
Orientation-dependent creep behavior and microstructure of nickel solid solution single crystals.
In: Acta Materialia. Bd. 47 (1999) Heft 2 . - S. 397-406.
ISSN 1359-6454
DOI: https://doi.org/10.1016/S1359-6454(98)00378-4

Link, Thomas ; Knobloch, Carola ; Glatzel, Uwe:
<100> burgers vector in single phase ɣ​’ material verified by image simulation.
In: Scripta Materialia. Bd. 40 (1998) Heft 1 . - S. 85-90.
ISSN 1359-6462
DOI: https://doi.org/10.1016/S1359-6462(98)00387-X

Völkl, Rainer ; Glatzel, Uwe ; Feller-Kniepmeier, Monika:
Measurement of the lattice misfit in the single crystal nickel based superalloys CMSX-4, SRR 99 and SC 16 by convergent beam electron diffraction.
In: Acta Materialia. Bd. 46 (1998) Heft 12 . - S. 4395-4404.
ISSN 1359-6454
DOI: https://doi.org/10.1016/S1359-6454(98)00085-8

Völkl, Rainer ; Glatzel, Uwe ; Feller-Kniepmeier, Monika:
Measurement of the unconstrained misfit in the Nickel-Base Superalloy CMSX-4 with CBED.
In: Scripta Materialia. Bd. 38 (1998) Heft 6 . - S. 893-900.
ISSN 1359-6462
DOI: https://doi.org/10.1016/S1359-6462(97)00559-9

Knobloch, Carola ; Toloraia, V. N. ; Glatzel, Uwe:
Anisotropic creep of Ni3(AlTiTa).
In: Scripta Materialia. Bd. 37 (1997) Heft 10 . - S. 1491-1498.
ISSN 1359-6462
DOI: https://doi.org/10.1016/S1359-6462(97)00299-6

Knobloch, Carola ; Sass, Volker ; Siebörger, Dieter ; Glatzel, Uwe:
Anisotropie creep behavior of a nickel-based superalloy compared with single phase nickel solid solution and γ′ phase single crystals.
In: Materials Science and Engineering: A. Bd. 234-236 (1997) . - S. 237-241.
ISSN 1873-4936
DOI: https://doi.org/10.1016/S0921-5093(97)00142-1

Sass, Volker ; Glatzel, Uwe ; Feller-Kniepmeier, Monika:
Anisotropic creep properties of the nickel-base superalloy CMSX-4.
In: Acta Materialia. Bd. 44 (1996) Heft 5 . - S. 1967-1977.
ISSN 1359-6454
DOI: https://doi.org/10.1016/1359-6454(95)00315-0

Glatzel, Uwe ; Peng, Z. ; Linker, Torsten ; Feller-Kniepmeier, Monika:
Change of Phase Morphologies During Creep of CMSX-4 at 1253K.
In: Scripta Materialia. Bd. 34 (1996) Heft 2 . - S. 221-226.
ISSN 1359-6462
DOI: https://doi.org/10.1016/1359-6462(95)00510-2

Forbes, Keith R. ; Glatzel, Uwe ; Dariola, Ram ; Nix, William D.:
High temperature deformation properties of NiAl single crystals.
In: Metallurgical and Materials Transactions A. Bd. 27 (1996) Heft 5 . - S. 1229-1240.
ISSN 1543-1940
DOI: https://doi.org/10.1007/BF02649860

Wanderka, Nelia ; Glatzel, Uwe:
Chemical composition measurements of a nickel-base superalloy by atom probe field ion microscopy.
In: Materials Science and Engineering: A. Bd. 203 (1995) Heft 1-2 . - S. 69-74.
ISSN 1873-4936
DOI: https://doi.org/10.1016/0921-5093(95)09825-9

Wanderka, Nelia ; Glatzel, Uwe:
Messung der chemischen Zusammensetzung einer einkristallinen Nickelbasissuperlegierung mit hoher Ortsauflösung.
In: GIT : Labor-Fachzeitschrift. Bd. 39 (1995) Heft 11 . - S. 1059-1062.
ISSN 0016-3538

Völkl, Rainer ; Glatzel, Uwe ; Feller-Kniepmeier, Monika:
Analysis of matrix and interfacial dislocations in the nickel base superalloy CMSX-4 after creep in [1̄11] direction.
In: Scripta Metallurgica et Materialia. Bd. 31 (1994) Heft 11 . - S. 1481-1486.
ISSN 1873-2712
DOI: https://doi.org/10.1016/0956-716X(94)90060-4

Glatzel, Uwe ; Müller, Andreas:
Neutron scattering experiments with a nickel base superalloy part I : Material and experiment.
In: Scripta Metallurgica et Materialia. Bd. 31 (1994) Heft 3 . - S. 285-290.
ISSN 1873-2712
DOI: https://doi.org/10.1016/0956-716X(94)90284-4

Glatzel, Uwe:
Neutron scattering experiments with a nickel base superalloy part II : Analysis of intensity profiles.
In: Scripta Metallurgica et Materialia. Bd. 31 (1994) Heft 3 . - S. 291-296.
ISSN 1873-2712
DOI: https://doi.org/10.1016/0956-716X(94)90285-2

Müller, Lothar ; Glatzel, Uwe ; Feller-Kniepmeier, Monika:
Calculation of the internal stresses and strains in the microstructure of a single crystal nickel-base superalloy during creep.
In: Acta Metallurgica et Materialia. Bd. 41 (1993) Heft 12 . - S. 3401-3411.
ISSN 1359-6454
DOI: https://doi.org/10.1016/0956-7151(93)90220-M

Glatzel, Uwe ; Forbes, Keith R. ; Nix, William D.:
Dislocation energies for an anisotropic cubic crystal: Calculations and observations for NiAl.
In: Philosophical Magazine A. Bd. 67 (1993) Heft 2 . - S. 307-323.
ISSN 1460-6992
DOI: https://doi.org/10.1080/01418619308207160

Müller, Lothar ; Glatzel, Uwe ; Feller-Kniepmeier, Monika:
Modelling thermal misfit stresses in nickel-base superalloys containing high volume fraction of γ′ phase.
In: Acta Metallurgica et Materialia. Bd. 40 (1992) Heft 6 . - S. 1321-1327.
ISSN 1359-6454
DOI: https://doi.org/10.1016/0956-7151(92)90433-F

Glatzel, Uwe ; Feller-Kniepmeier, Monika:
Microstructure and dislocation configurations in fatigued [001] specimens of the nickel-based superalloy CMSX-6.
In: Scripta Metallurgica et Materialia. Bd. 25 (1991) Heft 8 . - S. 1845-1850.
ISSN 1873-2712
DOI: https://doi.org/10.1016/0956-716X(91)90315-R

Feller-Kniepmeier, Monika ; Glatzel, Uwe ; Link, Thomas ; Scheunemann-Frerker, Gerold ; Schmidt, Roland:
Entwicklung von Gefüge und Versetzungsstrukturen in der einkristallinen Nickelbasislegierung SRR 99 während Wärmebehandlung und Hochtemperaturkriechen.
In: Fortschrittsberichte VDI : Reihe 5. (1990) Heft 203 . - S. 53-64.
ISSN 0341-1664

Glatzel, Uwe ; Feller-Kniepmeier, Monika:
Calculations of internal stresses in the γ/γ′ microstructure of a nickel-base superalloy with high volume fraction of γ′-phase.
In: Scripta Metallurgica. Bd. 23 (1989) Heft 11 . - S. 1839-1844.
ISSN 0036-9748
DOI: https://doi.org/10.1016/0036-9748(89)90468-7

Glatzel, Uwe ; Lenz, Friedrich:
Optimization of electrostatic immersion lenses.
In: Optik. Bd. 79 (1988) Heft 1 . - S. 15-18.
ISSN 0030-4026

Aufsatz in einem Buch

Vogler, Jonas ; Song, Jieun ; Huber, Jakob ; Völkl, Rainer ; Glatzel, Uwe:
Mechanical and Microstructural Properties of Brazed Honeycomb Liner Material Haynes 214.
In: Ott, Eric A. ; Andersson, Joel ; Sudbrack, Chantal ; Bi, Zhongnan ; Bockenstedt, Kevin ; Dempster, Ian ; Fahrmann, Michael ; Jablonski, Paul ; Kirka, Michael ; Liu, Xingbo ; Nagahama, Daisuke ; Smith, Tim ; Stockinger, Martin ; Wessman, Andrew (Hrsg.): Proceedings of the 10th International Symposium on Superalloy 718 and Derivatives. - Cham : Springer , 2023 . - S. 445-452 . - (The Minerals, Metals & Materials Series )
ISBN 978-3-031-27447-3
DOI: https://doi.org/10.1007/978-3-031-27447-3_28

Manzoni, Anna M. ; Glatzel, Uwe:
High-Entropy Alloys : Balancing Strength and Ductility at Room Temperature.
In: Miyamoto, Goro ; Gao, Michael C. (Hrsg.): Encyclopedia of Materials : Metals and Alloys. Band 2. - Amsterdam : Elsevier , 2022 . - S. 441-453
ISBN 978-0-12-819733-2
DOI: https://doi.org/10.1016/B978-0-12-803581-8.11774-6

Schleifer, Felix ; Fleck, Michael ; Holzinger, Markus ; Lin, Yueh-Yu ; Glatzel, Uwe:
Phase-Field Modeling of γ' and γ'' Precipitate Size Evolution During Heat Treatment of Ni-Based Superalloys.
In: Tin, Sammy ; Hardy, Mark ; Clews, Justin ; Cormier, Jonathan ; Feng, Qiang ; Marcin, John ; O'Brien, Chris ; Suzuki, Akane (Hrsg.): Superalloys 2020 : Proceedings of the 14th International Symposium on Superalloys. - Cham : Springer International Publishing , 2020 . - S. 500-508
ISBN 978-3-030-51833-2
DOI: https://doi.org/10.1007/978-3-030-51834-9_49

Fleck, Michael ; Schleifer, Felix ; Holzinger, Markus ; Glatzel, Uwe:
Improving the numerical solution of the phase-field equation by the systematic integration of analytic properties of the phase-field profile function.
In: Gleim, Tobias (Hrsg.): 8th GACM Colloquium on Computational Mechanics for Young Scientists from Academia and Industry : Proceedings. - Kassel : Kassel University Press , 2019 . - S. 445-449
ISBN 978-3-86219-5093-9

Krieg, Fabian ; Mosbacher, Mike ; Fried, Markus ; Affeldt, Ernst ; Glatzel, Uwe:
Creep and Oxidation Behaviour of Coated and Uncoated Thin Walled Single Crystal Samples of the Alloy PWA1484.
In: Superalloys 2016 : Proceedings of the 13th Intenational Symposium of Superalloys. - Hoboken, New Jersey : Wiley , 2016 . - S. 773-779
ISBN 978-1-119-07564-6
DOI: https://doi.org/10.1002/9781119075646.ch83

Glatzel, Uwe ; Völkl, Rainer:
Metals.
In: Bullinger, Hans-Jörg (Hrsg.): Technology Guide : Principles – Applications – Trends. - Berlin : Springer , 2009 . - S. 8-13
ISBN 978-3-540-88546-7
DOI: https://doi.org/10.1007/978-3-540-88546-7_2

Glatzel, Uwe:
Metalle.
In: Bullinger, Hans-Jörg (Hrsg.): Technologieführer : Grundlagen, Anwendungen, Trends. - Berlin : Springer , 2007 . - S. 10-15
ISBN 978-3-540-33788-1

Reissig, Lutz ; Glatzel, Uwe:
Influence of Mechanical Deep Drilling on the Near-Surface-Microstructure of Ti6Al4V.
In: Clyne, T. W. ; Simancik, Frantisek (Hrsg.): Metal matrix composites and metallic foams. - Weinheim : Wiley-VCH , 2005 . - S. 202-207 . - (EUROMAT 99 ; 5 )
ISBN 3-527-30126-7
DOI: https://doi.org/10.1002/3527606203.ch36

Brehm, Holger ; Glatzel, Uwe:
Dislocation Density Based Model Incorporated in a Finite Element Code in Order to Describe the Creep Behavior of Two Phase Nickel Based Superalloy.
In: Khan, Akhtar S. (Hrsg.): Plasticity, damage and fracture at macro, micro and nano scales : proceedings. - Fulton, Md. : NEAT Press , 2002 . - S. 236-238
ISBN 0-9659463-3-9

Reissig, Lutz ; Völkl, Rainer ; Glatzel, Uwe:
Influence of Mechanical Deep Drilling on the Near Surface Microstructure of Ti6Al4V.
In: Schnapp, Jürgen Dieter ; Glatzel, Uwe ; Jandt, K. D. ; Knake, Harald (Hrsg.): Thüringer Werkstofftag 2002. - Berlin : Köster , 2002 . - S. 153-158 . - (Schriftenreihe Werkstoffwissenschaften ; 17 )
ISBN 3-89574-473-5

Gorelik, Tatiana ; Kaiser, Ute ; Glatzel, Uwe:
Morphology and Structure of Ge Nanocrystals after Ion-Implantation into SiC.
In: Schnapp, Jürgen Dieter ; Glatzel, Uwe ; Jandt, K. D. ; Knake, Harald (Hrsg.): Thüringer Werkstofftag 2002. - Berlin : Köster , 2002 . - S. 80-85 . - (Schriftenreihe Werkstoffwissenschaften ; 17 )
ISBN 3-89574-473-5

Völkl, Rainer ; Glatzel, Uwe ; Brömel, T. ; Freund, D. ; Fischer, Bernd ; Lupton, David:
Creep of Platinum Alloys at Extremely High Temperatures.
In: Parker, J. D. (Hrsg.): Creep and fracture of engineering materials and structures : proceedings. - London : Institute of Materials , 2001 . - S. 21-27
ISBN 978-1-86125-144-2

Brehm, Holger ; Glatzel, Uwe:
Modeling the Anisotropic Primary and Secondary Creep Behavior of Single Crystals and Comparison with Experimentally Observed Behavior of Various Alloys.
In: Mishra, Rajiv S. (Hrsg.): Creep behavior of advanced materials for the 21st century : proceedings of a symposium sponsored by the MPMD and SMD divisions of the Minerals, Metals & Materials Society. - Warrendale, Pa. : Minerals, Metals & Materials Society , 1999 . - S. 359-368
ISBN 0-87339-420-8

Thiel, S. ; Glatzel, Uwe ; Mack, Thomas:
Characterization of Phases in Oxidation Protecting Coatings for Superalloys.
In: 4th International Congress on Energy, Environment and Technological Innovation. - Rom , 1999 . - S. 645-649

Brehm, Holger ; Glatzel, Uwe:
First Attempt to Develop a Material Model Describing Single Crystal Creep Behavior.
In: Bulatov, Vasily V. (Hrsg.): Multiscale Modelling of Materials. - Warrendale, Pa. : Materials Research Soc. , 1999 . - S. 547-552 . - (MRS Symposium Proceedings ; 538 )
ISBN 1-55899-444-0

Knobloch, Carola ; Glock, Karin ; Glatzel, Uwe:
Observations of Orientation Dependent Creep of Ni3Al.
In: George, Easo P. (Hrsg.): High temperature ordered intermetallic alloys VIII. - Warrendale, Pa. : Materials Research Soc. , 1999 . - S. 1-5 . - (MRS Symposium Proceedings ; 552 )
ISBN 1-55899-458-0

Siebörger, Dieter ; Glatzel, Uwe:
Orientation Dependent Creep Behavior and Dislocation Structure of Nickel Solid Solution Single Crystals.
In: Sakuma, T. (Hrsg.): Creep and fracture of engineering materials and structures : proceedings. - Uetikon-Zürich : Trans Tech Publ. , 1999 . - S. 253-260
ISBN 0-87849-842-7
DOI: https://doi.org/10.4028/www.scientific.net/KEM.171-174.253

Thiel, S. ; Wortmann, J. ; Glatzel, Uwe:
A Superalloy with a Low Density.
In: Kern, Heinrich (Hrsg.): Thüringer Werkstofftag : 15. März 1999 ; Vorträge und Poster. - Ilmenau : TU, Inst. für Werkstofftechnik , 1999 . - S. 121-126

Völkl, Rainer ; Glatzel, Uwe ; Feller-Kniepmeier, Monika:
ImageCBED++: an Easy to Use Program for Rapid Analysis of CBED HOLZ Line Patterns.
In: Electron Microscopy 1998 : Proceedings. Band 3. Materials Science 2. - Bristol : Institute of Physics Publ. , 1998 . - S. 785-786
ISBN 0-7503-0566-5

Sass, Volker ; Siebörger, Dieter ; Knobloch, Carola ; Glatzel, Uwe:
Anisotropic Creep Behavior of a Nickel-Based Superalloy Compared with Nickel Solid Solution and γ' Phase Single Crystals.
In: Earthman, James C. ; Mohamed, Farghalli A. (Hrsg.): Creep and fracture of engineering materials and structures : proceedings. - Warrendale, Pa. : Mineral, Metals & Materials Soc. , 1997 . - S. 687-696
ISBN 0-87339-379-1

Siebörger, Dieter ; Sass, Volker ; Knobloch, Carola ; Glatzel, Uwe:
Anisotropic Creep Behavior of a Nickel-Based Superalloy in Comparison with Single Phase Nickel Solid Solution and γ' Phase Single Crystals.
In: Khan, Akhtar S. (Hrsg.): Physics and mechanics of finite plastic and viscoplastic deformation : proceedings. - Fulton, Md. : NEAT Press , 1997 . - S. 87-88
ISBN 0-9659463-0-4

Sass, Volker ; Glatzel, Uwe ; Feller-Kniepmeier, Monika:
Creep Anisotropy in the Monocrystalline Nickel-Base Superalloy CMSX-4.
In: Kissinger, R. D. ; Deye, D. J. ; Anton, D. L. ; Cetel, A. D. ; Nathal, M. V. ; Pollock, T. M. ; Woodford, D. A. (Hrsg.): Superalloys 1996. - Warrendale, Pa. , 1996 . - S. 283-290
ISBN 0-87339-352-X

Völkl, Rainer ; Glatzel, Uwe ; Feller-Kniepmeier, Monika:
Analysis of Matrix and Interfacial Dislocations in the Nickel-Based Superalloy CMSX 4 after creep in [111] direction.
In: The 4th European Conference on Advanced Materials and Processes. Band 2. Symposium D - structural metallic materials, symposium E - surface engineering. - Milano : Associazione Italiana di Metallurgia , 1995 . - S. 573-576
ISBN 88-85298-22-2

Glatzel, Uwe ; Müller, Andreas ; Reimers, Walter ; Feller-Kniepmeier, Monika:
Determination of Internal Strains in Single Crystal Nickel-Based Superalloys by Neutron Diffraction.
In: The 4th European Conference on Advanced Materials and Processes. Band 2. Symposium D - structural metallic materials, symposium E - surface engineering. - Milano : Associazione Italiana di Metallurgia , 1995 . - S. 233-242
ISBN 88-85298-22-2

Glatzel, Uwe ; Müller, Andreas:
Calculated and Measured Internal Strains of Creep Deformed Single Crystal Nickel Based Superalloys.
In: Andersen, S. I. (Hrsg.): Numerical predictions of deformation processes and the behavior of real materials. - Roskilde : Risø National Laboratory , 1994 . - S. 319-324
ISBN 87-550-1997-8

Glatzel, Uwe ; Müller, Andreas:
Internal Strains of a Creep Deformed Single Crystal Nickel-Based Superalloy.
In: Neumann, Dan A. ; Russell, T. P. ; Wuensch, B. J. (Hrsg.): Neutron Scattering in Materials Science II. - Pittsburgh , 1994 . - S. 397-402 . - (Materials Research Society Symposium Proceedings ; 376 )
ISBN 1558992782
DOI: https://doi.org/10.1557/PROC-376-397

Forbes, Keith R. ; Glatzel, Uwe ; Dariola, Ram ; Nix, William D.:
High Temperature Deformation of Single Crystals of NiAl.
In: Baker, Ian ; Dariola, Ram ; Whittenberger, J. D. ; Yoo, M. H. (Hrsg.): High-Temperature Ordered Intermetallic Alloys V. - Pittsburgh , 1993 . - S. 45 . - (Materials Research Society Symposium Proceedings ; 288 )
ISBN 1558991832
DOI: https://doi.org/10.1557/PROC-288-45

Glatzel, Uwe ; Forbes, Keith R. ; Nix, William D.:
TEM Observations of Dislocation Structures in Single Crystals of NiAl after High Temperature Creep.
In: Baker, Ian ; Dariola, Ram ; Whittenberger, J. D. ; Yoo, M. H. (Hrsg.): High-Temperature Ordered Intermetallic Alloys V. - Pittsburgh , 1993 . - S. 385-390 . - (Materials Research Society Symposium Proceedings ; 288 )
ISBN 1558991832
DOI: https://doi.org/10.1557/PROC-288-385

Müller, Lothar ; Glatzel, Uwe ; Feller-Kniepmeier, Monika:
Elastic Interaction in Nickel-Based Superalloys Containing High Volume Fraction of γ' Phase.
In: Boehler, Jean-Paul ; Khan, Akhtar S. (Hrsg.): Anisotropy and Localization of Plastic Deformation. - London , 1991 . - S. 512-515
ISBN 1851666885

Feller-Kniepmeier, Monika ; Glatzel, Uwe ; Link, Thomas ; Scheunemann-Frerker, Gerold:
Influence of Internal and External Stresses on the Microstructure of superalloy SRR99 During Heat Treatment and High Temperature Creep.
In: Wilshire, B. ; Evans, R. W. , The Institute of Metals (Hrsg.): Creep and Fracture of Engineering Materials and Structures. - UK , 1990 . - S. 323-331
ISBN 0-901462-58-6

Glatzel, Uwe ; Feller-Kniepmeier, Monika:
Application of a Finite Element Model to the Microstructure of a Nickel-Based Superalloy with High Volume Fraction of γ'-Phase.
In: Exner, Hans E. ; Schumacher, V. (Hrsg.): Advanced Materials and Processes : Proceedings of the First European Conference on Advanced Materials and Processes. - Aachen , 1989 . - S. 475-480

Veranstaltungsbeitrag

Gabriel, Tobias ; Scherm, Florian ; Gorywoda, Marek ; Glatzel, Uwe:
Influence of Laser Power and Scanning Velocity in One- and Two-Step Laser Cladding on Ultra-Thin Substrates.
2018
Veranstaltung: Conference on Lasers and Electro-Optics CLEO, Optical Society of America (2018) , 13.-18. Mai 2018 , San Jose, Calif., United States.
(Veranstaltungsbeitrag: Kongress/Konferenz/Symposium/Tagung , Vortrag )
DOI: https://doi.org/10.1364/CLEO_AT.2018.AM1M.7

Patent

Lalire, Fanny ; Pommier, Stéphane ; Diologent, Frédéric ; Trosch, Tanja ; Glatzel, Uwe ; Völkl, Rainer:
Platinum Based Alloy, Use Thereof.
EP17186552.0 - 1392 (2017)

Göhler, Thomas ; Affeldt, Ernst ; Rettig, Ralf ; Singer, Robert ; Neumeier, Steffen ; Göken, Mathias ; Fleischmann, Ernst ; Glatzel, Uwe ; Völkl, Rainer:
Nickel-Based Alloy with Optimized Matrix Properties.
US20150284824A1 (2015)

Göhler, Thomas ; Affeldt, Ernst ; Rettig, Ralf ; Singer, Robert ; Neumeier, Steffen ; Göken, Mathias ; Fleischmann, Ernst ; Glatzel, Uwe ; Völkl, Rainer:
Nickelbasislegierung mit optimierten Matrixeigenschaften.
EP2927336A1 (2014)

Konrad, Christian ; Völkl, Rainer ; Glatzel, Uwe:
Herstellung metallbeschichteter Werkstoffe.
DE 10 2012 022 846.5 (2012)

Konrad, Christian ; Völkl, Rainer ; Glatzel, Uwe:
Anodenmaterial für Brennstoffzellen : Herstellung eines funktionalen Verbundwerkstoffs, Cermets, aus einem elektronenleitenden Metall und einer sauerstoffionenleitenden Keramik zur Anwendung bei hohen Temperaturen.
DE 10 2011 107 827.8 (2011)

Konrad, Christian ; Völkl, Rainer ; Glatzel, Uwe:
Verfahren zur Herstellung einer porösen Keramik.
DE102011107827A1 (2011)

Konrad, Christian ; Völkl, Rainer ; Glatzel, Uwe:
Verfahren zur Herstellung eines Metallmatrix-Verbundwerkstoffs.
DE102011116604.5 (2011)

Glatzel, Uwe ; Mack, Thomas ; Wortmann, Jürgen ; Wöllmer, Silke:
Nickel Based Alloy for Casting Single Crystal Components.
EP1223229A1 (2001)

Glatzel, Uwe ; Mack, Thomas ; Wortmann, Jürgen ; Wöllmer, Silke:
Nickel-Based Alloy for Producing Components Solidified in Single Crystal Form.
US20020182100A1 (2001)

Glatzel, Uwe ; Mack, Thomas ; Wortmann, Jürgen ; Wöllmer, Silke:
Nickel-Based Alloy for Producing Structural Member Solidified as Single Crystal by Casting Method.
JP2002302724 (2001)

Glatzel, Uwe ; Mack, Thomas ; Wortmann, Jürgen ; Wöllmer, Silke:
Nickel-Based Alloy for Producing, by Casting, Components Which Have Solidified in Single Crystal Form.
CA2366997 (2001)

Glatzel, Uwe ; Mack, Thomas ; Wortmann, Jürgen ; Wöllmer, Silke:
Nickel-Basislegierung für die gießtechnische Herstellung einkristallin erstarrter Bauteile.
DE10100790C2 (2001)

Vollständiges Zeitschriftenheft

11th International Conference of Creep and Fracture of Engineering Materials and Structures, CREEP 2008.
Hrsg.: Glatzel, Uwe ; Eggeler, G. ; Kostorz, G.
Materials Science and Engineering: A. Bd. 510-511 (2009) .
ISSN 1873-4936