Titlebar
Publications listed by divisions  

Institutions of the University of Bayreuth
Faculties > Faculty of Engineering Science

One level up ...
Export as [feed] RSS 1.0 [feed] RSS 2.0
Group by: Year | Person | Item Type
Number of items at this level: 6207.

Book / Monograph

Häfner, Christopher ; Koller, Jan ; Koop, Carina ; Klein, Viktor:
Zukunftstrend nachhaltige Elektrofahrräder? : Erhebung zur Kreislaufwirtschaft in der Elektrofahrradbranche.
Fraunhofer-Institut für Produktionstechnik und Automatisierung IPA; Wuppertal Institut für Klima, Umwelt, Energie gGmbH; Trägerverein Umwelttechnologie-Cluster Bayern e.V.
Bayreuth , 2021 . - 40 p.

Volltext
Irl, Matthäus ; Aubele, Katharina ; Baumann, Thomas ; Dawo, Fabian ; Hindelang, Jakob ; Keim, Maximilian ; Mayer-Ullmann, Philipp ; Molar-Cruz, Anahi ; Walcher, Friedrich ; Wieland, Christoph ; Eller, Tim ; Heberle, Florian:
Flexibilitätsoptionen der Strom- und Wärmeerzeugung mit Geothermie in einem von volatilem Stromangebot bestimmten Energiesystem.
Umweltbundesamt
Dessau-Roßlau , 2020 . - 343 p. - (Climate Change ; 24 )

Jess, Andreas ; Wasserscheid, Peter:
Chemical Technology : From Principles to Products. 2. Auflage.
Weinheim : Wiley-VCH , 2020 . - Xl, 865 p.

Hackenschmidt, Reinhard ; Hautsch, Stefan ; Kleinschrodt, Claudia ; Roppel, Matthias:
Creo Parametric für Einsteiger : Bauteile, Baugruppen und Zeichnungen.
München : Hanser , 2020 . - VIII, 276 p.
DOI: https://doi.org/10.3139/9783446461659

Lengsfeld, Hauke ; Lacalle, Javier ; Neumeyer, Thomas ; Altstädt, Volker:
Faserverbundwerkstoffe : Prepregs und ihre Verarbeitung. 2., aktualisierte und erweiterte Auflage.
München : Hanser , 2020 . - XIX, 266 p.
DOI: https://doi.org/10.3139/9783446466036

Spurk, Joseph H. ; Aksel, Nuri:
Fluid Mechanics. 3. Auflage.
Cham : Springer International Publishing , 2020 . - XIV, 589 p.
DOI: https://doi.org/10.1007/978-3-030-30259-7

Hautsch, Stefan:
Virtuelles Finite-Elemente-Labor : FEM-Labor virtuell: 01-1420-001-1. 1.
Hamburger Fern-Hochschule
Hamburg : Haussatz Hamburger Fern-Hochschule , 2019 . - 87 p.

Volltext
17. Gemeinsames Kolloquium Konstruktionstechnik : Agile Entwicklung physischer Produkte.
ed.: Corves, Burkhard ; Gericke, Kilian ; Grote, Karl-Heinrich ; Lohrengel, Armin ; Müller, Norbert ; Nagarajah, Arun ; Rieg, Frank ; Scharr, Gerhard ; Stelzer, Ralph
Aachen , 2019
DOI: https://doi.org/10.18154/RWTH-2019-08298

Lengsfeld, Hauke ; Mainka, Hendrik ; Altstädt, Volker:
Carbonfasern : Herstellung, Anwendung, Verarbeitung.
München : Hanser , 2019 . - XVIII, 215 p.
DOI: https://doi.org/10.3139/9783446460805

Franzl, Peter ; Jacobs, Karin ; Möller, Martin ; Scheibel, Thomas ; Sternberg, Karin:
Materialforschung : Impulsgeber Natur: Innovationspotenzial biologisch inspirierter Materialien und Werkstoffe.
acatech - Deutsche Akademie der Technikwissenschaften
München : acatech , 2019 . - 140 S. - (acatech Diskussion )

Tagungsband : 21. Bayreuther 3D-Konstrukteurstag.
ed.: Rieg, Frank ; Kleinschrodt, Claudia
Bayreuth , 2019

Digitalisierung und Produktentwicklung : Vernetzte Entwicklungsumgebungen ; Tagungsband : 16. Gemeinsames Kolloquium Konstruktionstechnik 2018.
ed.: Brökel, Klaus ; Nagarajah, Arun ; Rieg, Frank ; Scharr, Gerhard ; Stelzer, Ralph ; Corves, Burkhard ; Grothe, Karl-Heinrich ; Lohrengel, Arnim ; Müller, Norbert
Bayreuth : Universität Bayreuth, Lehrstuhl für Konstruktionslehre und CAD , 2018 . - X, 372 p. - (Gemeinsames Kolloquium Konstruktionstechnik ; 16 )

Volltext
Tagungsband: 20. Bayreuther 3D-Konstrukteurstag: am 20. September 2018.
ed.: Rieg, Frank ; Hackenschmidt, Reinhard
Bayreuth , 2018 . - (Bayreuther 3D-Konstrukteurstag ; 20 )

Decker, Karl-Heinz ; Rieg, Frank ; Engelken, Gerhard ; Weidermann, Frank ; Hackenschmidt, Reinhard ; Alber-Laukant, Bettina:
Maschinenelemente : Aufgaben. 16., neu bearbeitete Auflage.
München : Hanser , 2018 . - 341 p.

Decker, Karl-Heinz ; Rieg, Frank ; Engelken, Gerhard ; Weidermann, Frank ; Hackenschmidt, Reinhard ; Alber-Laukant, Bettina:
Maschinenelemente : Funktion, Gestaltung und Berechnung. 20., neu bearbeitete Auflage.
München : Hanser , 2018 . - 773 p.

Decker, Karl-Heinz ; Rieg, Frank ; Engelken, Gerhard ; Weidermann, Frank ; Hackenschmidt, Reinhard ; Alber-Laukant, Bettina:
Maschinenelemente : Tabellen und Diagramme. 20., neu bearbeitete Aufl., abgestimmt auf die 20. Aufl. des Hauptbd. / bearb. von Frank Rieg ..
München : Hanser , 2018 . - 219 p.

Decker, Karl-Heinz ; Rieg, Frank ; Engelken, Gerhard ; Weidermann, Frank ; Hackenschmidt, Reinhard ; Alber-Laukant, Bettina:
Maschinenelemente: Formeln. 8., neu bearbeitete Aufl., abgestimmt auf die 20. Aufl. des Hauptbd. / bearb. von Frank Rieg.
München : Hanser , 2018 . - 203 p.

Rieg, Frank ; Steinhilper, Rolf:
Handbuch Konstruktion. 2., aktualisierte Auflage.
München : Hanser , 2018 . - 1270 p.

Böhner, Johannes ; Jahn, Josefine ; Klein, Melanie ; Küfner, Thomas ; Lothes, Gerald ; Reger, Arnim ; Schock, Christoph ; Thorenz, Benjamin ; Uhlemann, Thomas ; Glasschröder, Johannes ; Brugger, Martin ; Chen, Qian ; Ellenrieder, Stephanie ; Gebbe, Christian ; Götz, Georg ; Lutter-Günther, Max ; Müller, Thiemo ; Schmidt, Vanessa ; Schweda, Svenja ; Teufelhart, Stefan ; Unterberger, Eric:
Strategien und Methoden der ressourceneffizienten Produktion : Green Factory Bavaria.
ed.: Reinhart, Gunther ; Steinhilper, Rolf
Stuttgart : Fraunhofer Verlag , 2017 . - 81 p.

Volltext
Tagungsband: 19. Bayreuther 3D-Konstrukteurstag: am 20. September 2017.
ed.: Rieg, Frank ; Hackenschmidt, Reinhard
Bayreuth , 2017

Westermann, Hans-Henrik ; Süchting, Martin ; Eisinger, Eva ; Steinhilper, Rolf:
Entwicklungen und Zukunftstrends in der Zerspanung : Ergebnisse der Studie zur "Zerspanung 2020".
Bayreuth : Selbstverlag, Lehrstuhl Umweltgerechte Produktionstechnik , 2017 . - 30 p.

Volltext
15. Gemeinsames Kolloquium Konstruktionstechnik 2017 : Interdisziplinäre Produktentwicklung.
ed.: Brökel, Klaus ; Rieg, Frank ; Stelzer, Ralph
Duisburg : Universität , 2017 . - 401 S. p. - (Schriftenreihe Produktentwicklung und Konstruktionsmethodik )
DOI: https://doi.org/10.17185/duepublico/44616

Rieg, Frank:
Drehen für Hobbyschlosser und Oldtimerfans. 1. Auflage.
Herzogenrath : Shaker , 2017 . - III, 345 S. p.

Steinhilper, Rolf ; Drews, Tom ; Molenda, Paul ; Oechsle, Oliver ; Siebert, Johannes ; Beneken, Gerd ; Kucich, Martin ; Hummel, Felix:
Entwicklung methodenbasierter produktionslogistischer Wertschöpfungsprozesse.
Bayreuth : Universität Bayreuth, Fraunhofer-Projektgruppe Prozessinnovation am Lehrstuhl für Umweltgerechte Produktionstechnik , 2017 . - 93 p.

Volltext
Schuh, Christian ; Rosemann, Bernd ; Oechsle, Oliver:
Collaborative Process Optimization : An Approach to Individual Packaging Hollows.
Athens : Athens Institute for Education and Research , 2016 . - 11 p. - (ATINER'S Conference Paper Series ; ENG2016-2062 )

Volltext
Tagungsband: 18. Bayreuther 3D-Konstrukteurstag: am 21. September 2016.
ed.: Rieg, Frank ; Hackenschmidt, Reinhard
Bayreuth : Universität Bayreuth, Lehrstuhl für Konstruktionslehre und CAD , 2016

Volltext

14. Gemeinsames Kolloquium Konstruktionstechnik 2016 : Traditio et Innovatio - Entwicklung und Konstruktion.
ed.: Rieg, Frank ; Brökel, Klaus ; Feldhusen, Jörg ; Stelzer, Ralph ; Grote, Karl-Heinrich ; Müller, Norbert ; Köhler, Peter ; Scharr, Gerhard
Aachen : Shaker , 2016 . - V, 327 p.

Lengsfeld, Hauke ; Wolff-Fabris, Felipe ; Krämer, Johannes ; Lavalle, Javier ; Altstädt, Volker:
Composite Technology : Prepregs and Monolithic Part Fabrication Technologies.
München : Hanser , 2016 . - XV, 205 p.
DOI: https://doi.org/10.3139/9781569906002

Döge, Norman ; Lu, Lu ; Jamerson, Gordon ; Arndt, Wulf-Holger ; Bauer, Marius ; Becht, Florian ; Danzer, Michael A. ; Dreyhaupt, Daniel ; Groman, Flavio ; Günther, Clemens ; Hennings, Wilfried ; Kämpfer, René ; Linssen, Jochen ; Marker, Stefanie ; Siegert, Wassili ; Strunz, Kai ; Taumann, Michael ; Winkelmann, Frithjof:
Elektrifizierungspotential kommerzieller Kraftfahrzeug-Flotten im Wirtschaftsverkehr als dezentrale Energie-Ressource in städtischen Verteilnetzten - komDRIVE.
ed.: Arndt, Wulf-Holger ; Döge, Norman ; Marker, Stefanie
Berlin : Universitätsverlag der TU Berlin , 2016 . - XIII, 261 p.
DOI: https://doi.org/10.14279/depositonce-4984

Beck, Hans-Peter ; Danzer, Michael A. ; Jossen, Andreas ; Kneiske, Tanja ; Lux, Stephan ; Sauer, Dirk Uwe ; Styczynski, Z. A. ; Bart, Heike ; Bayer, Björn ; Klee Barillas, Joaquin ; Dennenmoser, Martin ; Gitis, Alexander ; Idlbi, Basem ; Klabunde, Christian ; Koring, Karolina ; Moskalenko, Natalia ; Naumann, Maik ; Landau, Markus ; Puchta, Matthias ; Raab, Sebastian ; Shan, Weiwei ; Spielmann, Verena ; Lando, Eric Tchoupou ; von Appen, Jan ; Wenzl, Heinz:
Potentiale elektrochemischer Speicher in elektrischen Netzen in Konkurrenz zu anderen Technologien und Systemlösungen (ESPEN).
ed.: Beck, Hans-Peter
Göttingen : Cuvillier Verl. , 2016 . - XXXV, 416 p.

Reinhart, Gunther ; Steinhilper, Rolf ; Böhner, Johannes ; Gebbe, Christian ; Glasschröder, Johannes ; Lothes, Gerald ; Müller, Thiemo ; Simon, Peter ; Unterberger, Eric ; Weeber, Max:
Ressourceneffiziente Fabriken : Innovative Praxisbeispiele und zukünftige Handlungsfelder.
Stuttgart : Fraunhofer Verlag , 2016 . - 95 p.

Scheibel, Thomas:
Die Kräfte der Superhelden oder : Was Spiderman besser wissen sollte.
Universität Bayreuth
Bayreuth , 2015 . - 30 p.

Lengsfeld, Hauke ; Wolff-Fabris, Felipe ; Krämer, Johannes ; Lacalle, Javier ; Altstädt, Volker:
Faserverbundwerkstoffe : Prepregs und ihre Verarbeitung.
München : Hanser , 2015 . - XIV, 209 p.
DOI: https://doi.org/10.3139/9783446440807

Rosemann, Bernd:
Green Management, Green Production : Nachhaltigkeit im produzierenden Gewerbe.
AKAD University
Stuttgart : AKAD Bildungsgesellschaft mbH , 2015 . - 70 p.

Volltext
Steinhilper, Rolf ; Kübler, Frank ; Hamacher, Moritz ; Böhner, Johannes ; Fiebach, Ralf ; Müller, Siegfried ; Volk, Daniel ; Kubizek, Andreas ; Wiegärtner, Verena:
Minimierung nicht wertschöpfender Energieaufwände durch energetische Anlagenoptimierung : BMBF-Rahmenkonzept Forschung für die Produktion von morgen, Fördermaßnahme "KMU-innovativ: Ressourcen- und Energieeffizienz".
Fraunhofer-Institut für Produktionstechnik und Automatisierung
Stuttgart : Fraunhofer Verlag , 2015 . - 39 p.

Produktentwicklung zur Qualitätssicherung.
ed.: Brökel, Klaus ; Feldhusen, Jörg ; Grote, Karl-Heinrich ; Müller, Norbert ; Rieg, Frank ; Stelzer, Ralph . Otto-von-Guericke-Universität, Fakultät für Maschinenbau
Magdeburg , 2015 . - IV, 320 p.

Rieg, Frank:
Schweißen für Hobbyschlosser und Oldtimerfans. 1. Aufl.
Herzogenrath : Shaker , 2015 . - VI, 265 S. p.

Volltext
Tagungsband: 17. Bayreuther 3D-Konstrukteurstag: am 16.September 2015.
ed.: Rieg, Frank ; Hackenschmidt, Reinhard
Bayreuth : Lehrstuhl für Konstruktionslehre und CAD, Universität Bayreuth , 2015

Steinhilper, Rolf ; Freiberger, Stefan ; Süchting, Martin ; Kafara, Markus ; Müller, Robert:
Technologie-Roadmap Oberfranken : Management Summary ; Abschlußbericht des Projektes.
Bayreuth : Universität , 2015 . - 205 p.

Volltext
Tagungsband 12. Gemeinsames Kolloquium Konstruktionstechnik 2014 : Methoden in der Produktentwicklung: Kopplung von Strategien und Werkzeugen im Produktentwicklungsprozess.
ed.: Rieg, Frank ; Brökel, Klaus ; Feldhusen, Jörg ; Grote, Karl-Heinrich ; Stelzer, Ralph . Lehrstuhl für Konstruktionslehre und CAD, Universität Bayreuth
Bayreuth , 2014 . - X, 492 p.

Rieg, Frank ; Hackenschmidt, Reinhard ; Alber-Laukant, Bettina:
Finite element analysis for engineers : Basics and practical applications with Z88Aurora.
München u.a. : Hanser , 2014 . - XIII, 719 p. . - 1 DVD

Rieg, Frank ; Hackenschmidt, Reinhard ; Alber-Laukant, Bettina:
Finite Elemente Analyse für Ingenieure : Grundlagen und praktische Anwendungen mit Z88Aurora. 5., überarbeitete Auflage.
München u.a. : Hanser , 2014 . - XIII, 721 p. . - 1 DVD

Tränkler, Hans-Rolf ; Fischerauer, Gerhard:
Das Ingenieurwissen : Messtechnik.
Berlin : Springer , 2014 . - IX, 96 p.
DOI: https://doi.org/10.1007/978-3-662-44030-8

Decker, Karl-Heinz ; Kabus, Karlheinz ; Rieg, Frank ; Hackenschmidt, Reinhard ; Engelken, Gerhard ; Weidermann, Frank:
Maschinenelemente - Funktion, Gestaltung und Berechnung : mit 871 Bildern, 164 Berechnungsbeispielen und einem Tabellenband mit 334 Tabellen und Diagrammen. 19., aktualisierte Auflage.
München u.a. : Hanser , 2014 . - 773 p.

Rieg, Frank ; Engelken, Gerhard ; Weidermann, Frank ; Hackenschmidt, Reinhard:
Maschinenelemente : Aufgaben. 15., aktualisierte Auflage.
München u.a. : Hanser , 2014 . - 340 p.

Rieg, Frank ; Engelken, Gerhard ; Weidermann, Frank ; Hackenschmidt, Reinhard:
Maschinenelemente: Formeln. 7., aktualisierte Aufl., abgestimmt auf die 19. Aufl. des Lehrbuchs.
München u.a. : Hanser , 2014 . - 183 p.

Volltext
Tagungsband: 16. Bayreuther 3D-Konstrukteurstag : am 17. September 2014.
ed.: Rieg, Frank ; Hackenschmidt, Reinhard
Bayreuth : Universität Bayreuth, Lehrstuhl für Konstruktionslehre und CAD , 2014

Jess, Andreas ; Wasserscheid, Peter:
Chemical Technology : An Integral Textbook.
Weinheim : Wiley-VCH , 2013 . - XXXVII, 850 p.

11. Gemeinsames Kolloquium Konstruktionstechnik 2013 : Standortvorteil Methodik.
ed.: Brökel, Jörg ; Feldhusen, Jörg ; Grote, Karl-Heinrich ; Rieg, Frank ; Stelzer, Ralph
Aachen : Shaker , 2013 . - 398 p. - (Schriftenreihe Produktentwicklung und Konstruktionsmethodik ; 15 )

Volltext
Tagungsband: 15. Bayreuther 3D-Konstrukteurstag : am 18. September 2013.
ed.: Rieg, Frank ; Hackenschmidt, Reinhard
Bayreuth : Universität Bayreuth, Lehrstuhl für Konstruktionslehre und CAD , 2013 . - 1 CDROM

Entwerfen, entwickeln, erleben : Methoden und Werkzeuge in der Produktenentwicklung.
ed.: Brökel, Jörg ; Feldhusen, Jörg ; Grote, Karl-Heinrich ; Rieg, Frank ; Stelzer, Ralph
Dresden : TUDpress , 2012 . - 408 p. - (Schriftenreihe Produktentwicklung und Konstruktionsmethodik ; 10 )

Rieg, Frank ; Hackenschmidt, Reinhard ; Alber-Laukant, Bettina:
Finite Elemente Analyse für Ingenieure. 4., überarbeitete und erweiterte Auflage.
München u.a. : Hanser , 2012 . - XIII, 721 p. . - 1 DVDROM

Linssen, Jochen ; Bickert, Stefan ; Hennings, Wilfried ; Schulz, Alexandra ; Marker, Stefanie ; Schindler, Volker ; Mischinger, Stefan ; Schmidt, Arwed ; Strunz, Kai ; Maas, Heiko ; Schmitz, Peter ; Günther, Clemens ; Schott, Benjamin ; Danzer, Michael A. ; Weinmann, Oliver ; Lindwedel, Eckhard:
Netzintegration von Fahrzeugen mit elektrifizierten Antriebssystemen in bestehende und zukünftige Energieversorgungsstrukturen (NET-ELAN): Endbericht.
ed.: Linssen, Jochen
Jülich : Forschungszentrum Jülich , 2012 . - 266 p. - (Schriften des Forschungszentrums Jülich. Reihe Energie & Umwelt ; 150 )

Volltext
Tagungsband: 14. Bayreuther 3D-Konstrukteurstag : am 19. September 2012.
ed.: Rieg, Frank ; Hackenschmidt, Reinhard . Universität Bayreuth, Lehrstuhl für Konstruktionslehre und CAD
Bayreuth : Lehrstuhl für Konstruktionslehre und CAD, Universität Bayreuth , 2012 . - 1 Speicherkarte; 5 x 8 cm

Wolff-Fabris, Felipe ; Altstädt, Volker ; Arnold, Ulrich ; Döring, Manfred:
Electron beam curing of composites.
München : Hanser , 2011 . - VI, 129 p.
DOI: https://doi.org/10.3139/9783446433465

Integrierte Produktentwicklung für einen globalen Markt : Tagungsband.
ed.: Brökel, Jörg ; Feldhusen, Jörg ; Grote, Karl-Heinrich ; Rieg, Frank ; Stelzer, Ralph
Aachen : Shaker , 2011 . - 342 p. - (Konstruktionstechnik )

Decker, Karl-Heinz ; Kabus, Karlheinz ; Rieg, Frank ; Hackenschmidt, Reinhard ; Engelken, Gerhard ; Weidermann, Frank:
Maschinenelemente - Aufgaben. 14., aktualisierte Auflage.
München : Hanser , 2011
DOI: https://doi.org/10.3139/9783446429895

Decker, Karl-Heinz ; Kabus, Karlheinz ; Rieg, Frank ; Hackenschmidt, Reinhard ; Engelken, Gerhard ; Weidermann, Frank:
Maschinenelemente : Formeln. 5., aktualisierte Auflage.
München u.a. : Hanser , 2011 . - 184 p.

Volltext
Decker, Karl-Heinz ; Kabus, Karlheinz ; Rieg, Frank ; Hackenschmidt, Reinhard ; Engelken, Gerhard ; Weidermann, Frank:
Maschinenelemente : Funktion, Gestaltung und Berechnung ; mit ... 164 Berechnungsbeispielen .... 18., aktualisierte Auflage.
München u.a. : Hanser , 2011 . - 775 p.

Volltext
Tagungsband: 13. Bayreuther 3D-Konstrukteurstag : Am 21. September 2011.
ed.: Rieg, Frank ; Hackenschmidt, Reinhard
Bayreuth : Lehrstuhl für Konstruktionslehre und CAD, Universität Bayreuth , 2011 . - 1 CDROM

Altstädt, Volker ; Mantey, Axel:
Thermoplast-Schaumspritzgießen.
München : Hanser , 2011 . - X, 233 p.
DOI: https://doi.org/10.3139/9783446425743

Steinhilper, Rolf ; Köhler, Daniel C. F. ; Oechsle, Oliver:
Wertschöpfende Produktionslogistik : Status Quo, Trends und Handlungsansätze zur Gestaltung der Produktionslogistik in KMU.
Fraunhofer-Projektgruppe Prozessinnovation Bayreuth
Stuttgart : Fraunhofer-Verl. , 2011 . - 183 p.

Herausforderungen für die Produkt- und Prozessinnovation.
ed.: Brökel, Jörg ; Feldhusen, Jörg ; Grote, Karl-Heinrich ; Rieg, Frank ; Stelzer, Ralph
Barleben : docupoint , 2010 . - VI, 276 p.

Krenkel, Walter ; Lamon, J.:
High Temperature Ceramic Materials and Composites.
Berlin : AVISO Verlagsgesellschaft mbH , 2010 . - 911 p.

Decker, Karl-Heinz ; Kabus, Karlheinz ; Rieg, Frank ; Hackenschmidt, Reinhard ; Engelken, Gerhard ; Weidermann, Frank:
Maschinenelemente : Formeln. 4., aktualisierte Auflage.
München u.a. : Hanser , 2010 . - 184 p.

Spurk, Joseph H. ; Aksel, Nuri:
Strömungslehre : Einführung in die Theorie der Strömungen. 8. Auflage.
Berlin : Springer , 2010 . - XII, 574 p.
DOI: https://doi.org/10.1007/978-3-642-13143-1

Volltext
Tagungsband: 12. Bayreuther 3D-Konstrukteurstag : Am 29. September 2010.
ed.: Rieg, Frank ; Hackenschmidt, Reinhard . Universität Bayreuth, Lehrstuhl für Konstruktionslehre und CAD
Bayreuth : Lehrstuhl für Konstruktionslehre und CAD, Universität Bayreuth , 2010 . - 1 CDROM

Rieg, Frank ; Hackenschmidt, Reinhard:
Finite Elemente Analyse für Ingenieure : Eine leicht verständliche Einführung. 3., vollständig überarbeitete Auflage.
München u.a. : Hanser , 2009 . - III, 541 p. . - 1 CDROM

Decker, Karl-Heinz ; Kabus, Karlheinz ; Rieg, Frank ; Hackenschmidt, Reinhard ; Engelken, Gerhard ; Weidermann, Frank:
Maschinenelemente : Aufgaben ; mit 549 Aufgaben. 13., aktualisierte Auflage.
München u.a. : Hanser , 2009 . - 326 p.

Decker, Karl-Heinz ; Kabus, Karlheinz ; Rieg, Frank ; Hackenschmidt, Reinhard ; Engelken, Gerhard ; Weidermann, Frank:
Maschinenelemente : Funktion, Gestaltung und Berechnung; mit 173 Berechnungsbeispielen, sowie Berechnungssoftware auf CD-ROM. 17., aktualisierte Auflage.
München u.a. : Hanser , 2009 . - 799 p. . - 1 CDROM

Volltext
Tagungsband: 11. Bayreuther 3D-Konstrukteurstag : Am 30. September 2009.
ed.: Rieg, Frank ; Hackenschmidt, Reinhard . Universität Bayreuth, Lehrstuhl für Konstruktionslehre und CAD
Bayreuth : Lehrstuhl für Konstruktionslehre und CAD, Universität Bayreuth , 2009 . - 1 CDROM

Krenkel, Walter:
Verbundwerkstoffe.
Weinheim, Germany : WILEY-VCH , 2009 . - 725 p.

Vernetzte Produktenentwicklung : Methoden und Werkzeugkopplung.
ed.: Brökel, Jörg ; Grote, Karl-Heinrich ; Rieg, Frank ; Stelzer, Ralph ; Feldhusen, Jörg . Universität Bayreuth, Lehrstuhl für Konstruktionslehre und CAD
Bayreuth , 2009 . - 256 p.

Krenkel, Walter:
Ceramic Matrix Composites.
Weinheim, Germany : WILEY-VCH , 2008 . - 418 p.

Spurk, Joseph H. ; Aksel, Nuri:
Fluid Mechanics. 2. Auflage.
Berlin : Springer , 2008 . - X, 531 p.

Nachhaltige und effiziente Produktentwicklung.
ed.: Brökel, Jörg ; Grote, Karl-Heinrich ; Feldhusen, Jörg ; Rieg, Frank ; Stelzer, Ralph
Aachen : Shaker , 2008 . - X, 384 p. - (Schriftenreihe Produktentwicklung und Konstruktionsmethodik ; 5 )

Volltext
Tagungsband: 10. Bayreuther 3D-Konstrukteurstag : am 24. September 2008.
ed.: Rieg, Frank ; Hackenschmidt, Reinhard
Bayreuth : Lehrstuhl für Konstruktionslehre und CAD, Universität Bayreuth , 2008

Kirschen, Marcus:
Energieeffizienz und Emissionen der Lichtbogenöfen in der Stahlindustrie.
Düsseldorf : Verlag Stahleisen , 2007 . - V, 213 p.

5. Gemeinsames Kolloquium Konstruktionstechnik 2007 : am 20. und 21. September 2007 im Berghotel Bastei in der Sächsischen Schweiz bei Dresden ; [Tagungsband].
ed.: Brökel, Jörg ; Feldhusen, Jörg ; Grote, Karl-Heinrich ; Rieg, Frank ; Stelzer, Ralph
Dresden , 2007 . - IV, 279 p.

Volltext
Martini, Umberto ; Kleimt, Bernd ; Zisser, Stefan ; Kirschen, Marcus ; Velikorodov, Viktor ; De Miranda, Umberto ; Kühn, Robert ; Deng, Jianxiong ; Siig, Juri ; Wahlers, Franz-Josef ; Pfeifer, Herbert:
Development of operating conditions to improve chemical energy yield and performance of dedusting in airtight EAF.
European Commission, Directorate-General for Research
Luxembourg : Office for Official Publications of the European Communities , 2007 . - 131 p.

Decker, Karl-Heinz ; Kabus, Karlheinz ; Rieg, Frank ; Hackenschmidt, Reinhard ; Engelken, Gerhard ; Weidermann, Frank:
Maschinenelemente : Aufgaben ; mit 549 Aufgaben. 12., neu bearbeitete Auflage.
München : Hanser , 2007 . - 326 p.

Decker, Karl-Heinz ; Kabus, Karlheinz ; Rieg, Frank ; Hackenschmidt, Reinhard ; Engelken, Gerhard ; Weidermann, Frank:
Maschinenelemente : Formeln. 3., neu bearbeitete Auflage.
München : Hanser , 2007 . - 160 p.

Decker, Karl-Heinz ; Kabus, Karlheinz ; Rieg, Frank ; Hackenschmidt, Reinhard ; Engelken, Gerhard ; Weidermann, Frank:
Maschinenelemente : Funktion, Gestaltung und Berechnung ; mit ... 173 Berechnungsbeispielen ... 16., neu bearb. Auflage.
München : Hanser , 2007 . - 799 p.

Spurk, Joseph H. ; Aksel, Nuri:
Strömungslehre : Einführung in die Theorie der Strömungen. 7. Auflage.
Berlin ; Heidelberg : Springer-Verlag , 2007 . - X, 568 p.

Volltext
Tagungsband: 9. Bayreuther 3D-Konstrukteurstag : am 26. September 2007.
ed.: Rieg, Frank ; Hackenschmidt, Reinhard
Bayreuth : Universität Bayreuth, Lehrstuhl für Konstruktionslehre und CAD , 2007

High Temperature Ceramic Matrix Composites.
ed.: Krenkel, Walter ; Schneider, Hartmut ; Naslain, Roger
Weinheim : WILEY-VCH , 2006
DOI: https://doi.org/10.1002/3527605622

Volltext
Tagungsband: 8. Bayreuther 3D-Konstrukteurstag : am 27. September 2006.
ed.: Rieg, Frank ; Hackenschmidt, Reinhard
Bayreuth : Universität Bayreuth, Lehrstuhl für Konstruktionslehre und CAD , 2006

Wallmann, Clemens ; Laukant, Holger ; Glatzel, Uwe:
Thermisches Fügen für die stahlintensive Hybridbauweise im Fahrzeugleichtbau : (AVIF A 185).
Frankfurt : Verband der Automobilindustrie , 2006 . - (FAT-Schriftenreihe ; 200 )

Rosemann, Bernd ; Freiberger, Stefan ; Landenberger, Daniel:
CAD/CAM mit Pro/Engineer : Einstieg in die NC-Programmierung.
München : Hanser , 2005 . - 324 p.
Review:

Rieg, Frank:
Grafikprogrammierung für Windows : ; eine OpenGL- und GDI-Einführung.
München : Fachbuchverlag Leipzig im Carl Hanser Verlag , 2005 . - 296 p.

Rosemann, Bernd ; Freiberger, Stefan ; Goering, Jens-Uwe ; Landenberger, Daniel:
Pro/Engineer : Bauteile, Baugruppen, Zeichnungen.
München u.a. : Carl Hanser Verlag , 2005 . - 184 p.

Volltext
Tagungsband: 7. Bayreuther 3D-Konstrukteurstag : am 5. Oktober 2005.
ed.: Rieg, Frank ; Hackenschmidt, Reinhard
Bayreuth : Universität Bayreuth, Lehrstuhl für Konstruktionslehre und CAD , 2005 . - CD-ROM

Tagungsband: 6. Bayreuther 3D-Konstrukteurstag 2004.
ed.: Rieg, Frank ; Hackenschmidt, Reinhard . Universität Bayreuth, Lehrstuhl für Konstruktionslehre und CAD
Bayreuth : Universität Bayreuth, Lehrstuhl für Konstruktionslehre und CAD , 2004

Rieg, Frank ; Hackenschmidt, Reinhard:
Finite Elemente Analyse für Ingenieure : Eine leicht verständliche Einführung. 2., überarbeitete Auflage.
München : Hanser , 2003 . - 400 p.

Krenkel, Walter:
Keramische Verbundwerkstoffe.
Weinheim : WILEY-VCH , 2003 . - 272 p.
DOI: https://doi.org/10.1002/3527607315

Tagungsband: 5. Bayreuther 3D-Konstrukteurstag.
ed.: Rieg, Frank ; Hackenschmidt, Reinhard
Bayreuth : Lehrstuhl für Konstruktionslehre und CAD, Universität Bayreuth , 2003

Mengel, Christian ; Lucka, K. ; Köhne, H. ; Hein, O. ; Jess, Andreas:
Umwandlung von Heizöl in ein homogenes Brenngas-Luftgemisch durch oxidative Vorbehandlung jenseits der Bedingungen der Selbstzündung.
Hamburg : DGMK , 2003 . - (DGMK-Forschungsbericht ; 578 )

Thüringer Werkstofftag 2002.
ed.: Schnapp, Jürgen Dieter ; Glatzel, Uwe ; Jandt, Klaus D. ; Knake, Harald
Berlin : Köster , 2002

Rieg, Frank ; Hackenschmidt, Reinhard:
Softwaretechnik für Ingenieure : Eine leicht verständliche Einführung.
München : Hanser , 2001 . - 791 p.

Rieg, Frank ; Hackenschmidt, Reinhard:
Finite-Elemente-Analyse für Ingenieure : Eine leicht verständliche Einführung.
München : Hanser , 2000 . - XIII, 367 p.

Hedden, Kurt ; Jess, Andreas ; Fischer, M.:
Erdölprodukte - Raffinerien : Projekt Klimaverträgliche Energieversorgung in Baden-Württemberg.
Stuttgart : Akademie für Technikfolgenabschätzung in Baden-Württemberg , 1994 . - 39 p. - (Arbeitsberichte / Akademie für Technikfolgenabschätzung in Baden-Württemberg ; 14 )

Jess, Andreas ; Zartner-Nyilas, Gerda:
Stoffbilanzierungen in Baden-Württemberg : Stoffkreisläufe der Petrochemie.
Landesanstalt für Umweltschutz Baden-Württemberg
Karlsruhe : LfU , 1994 . - II, 77 S. p.

Article in a journal

Volltext
Völkl, Matthias ; Jérôme, Valérie ; Weig, Alfons ; Jasinski, Julia ; Meides, Nora ; Strohriegl, Peter ; Scheibel, Thomas ; Freitag, Ruth:
Pristine and artificially-aged polystyrene microplastic particles differ in regard to cellular response.
In: Journal of Hazardous Materials. Vol. 435 (5 August 2022) . - No. 128955.
DOI: https://doi.org/10.1016/j.jhazmat.2022.128955

Volltext
Charpentier Poncelet, Alexandre ; Helbig, Christoph ; Loubet, Philippe ; Beylot, Antoine ; Muller, Stéphanie ; Villeneuve, Jacques ; Laratte, Bertrand ; Thorenz, Andrea ; Tuma, Axel ; Sonnemann, Guido:
Losses and lifetimes of metals in the economy.
In: Nature Sustainability. (19 May 2022) . - 12 S..
DOI: https://doi.org/10.1038/s41893-022-00895-8

Sommer, Caroline ; Nguyen, Johnny ; Menzel, Teresa ; Prume, Julia A. ; Ruckdäschel, Holger ; Koch, Martin:
Weathering-induced oxidation : An investigation of artificially aged polystyrene samples using Laser-induced Breakdown Spectroscopy.
In: Polymer Testing. Vol. 112 (12 May 2022) . - No. 107623.
DOI: https://doi.org/10.1016/j.polymertesting.2022.107623

Cistjakov, Walter ; Laue, Vincent ; Röder, Fridolin ; Krewer, Ulrike:
Assessment of Core-Shell and Agglomerate Particle Design for All-Solid-State Batteries.
In: Journal of the Electrochemical Society. Vol. 169 (5 May 2022) Issue 5 . - No. 050510.
DOI: https://doi.org/10.1149/1945-7111/ac67f8

Milkin, Pavel ; Danzer, Michael A. ; Ionov, Leonid:
Self-Healing and Electrical Properties of Viscoelastic Polymer-Carbon Blends.
In: Macromolecular Rapid Communications. (5 May 2022) . - No. 2200307.
DOI: https://doi.org/10.1002/marc.202200307

Volltext
Constante Ibarra, Gissela Katherine ; Apsite, Indra ; Auerbach, Paul ; Aland, Sebastian ; Schönfeld, Dennis ; Pretsch, Thorsten ; Milkin, Pavel ; Ionov, Leonid:
Smart Mechanically Tunable Surfaces with Shape Memory Behavior and Wetting-Programmable Topography.
In: ACS Applied Materials & Interfaces. (19 April 2022) .
DOI: https://doi.org/10.1021/acsami.2c01078

Schleifer, Felix ; Müller, Moritz ; Lin, Yueh-Yu ; Holzinger, Markus ; Glatzel, Uwe ; Fleck, Michael:
Consistent Quantification of Precipitate Shapes and Sizes in Two and Three Dimensions Using Central Moments.
In: Integrating Materials and Manufacturing Innovation. (April 2022) .
DOI: https://doi.org/10.1007/s40192-022-00259-2

Mühlbauer, Markus ; Rang, Fabian ; Palm, Herbert ; Bohlen, Oliver ; Danzer, Michael A.:
Pareto-optimal power flow control in heterogeneous battery energy storage systems.
In: Journal of Energy Storage. Vol. 48 (April 2022) . - No. 103803.
DOI: https://doi.org/10.1016/j.est.2021.103803

Volltext
Goodarzi Hosseinabadi, Hossein ; Dogan, Elvan ; Miri, Amir K. ; Ionov, Leonid:
Digital Light Processing Bioprinting Advances for Microtissue Models.
In: ACS Biomaterials Science & Engineering. (31 March 2022) .
DOI: https://doi.org/10.1021/acsbiomaterials.1c01509

Witt, Daniel ; Röder, Fridolin ; Krewer, Ulrike:
Analysis of Lithium-Ion Battery State and Degradation via Physicochemical Cell and SEI Modeling.
In: Batteries & Supercaps. (22 March 2022) .
DOI: https://doi.org/10.1002/batt.202200067

Volltext

Jüttner, Michael ; Bartz, Marcel ; Tremmel, Stephan ; Wartzack, Sandro:
On the Transient Effects at the Beginning of 3D Elastic-Plastic Rolling Contacts for a Circular Point Contact Considering Isotropic Hardening.
In: Lubricants. Vol. 10 (19 March 2022) Issue 3 . - No. 47.
DOI: https://doi.org/10.3390/lubricants10030047

Schwarzer, Michael ; Brehm, Julian ; Vollmer, Martina ; Jasinski, Julia ; Xu, Chengzhang ; Zainuddin, Shakir ; Fröhlich, Thomas ; Schott, Matthias ; Greiner, Andreas ; Scheibel, Thomas ; Laforsch, Christian:
Shape, size, and polymer dependent effects of microplastics on Daphnia magna.
In: Journal of Hazardous Materials. Vol. 426 (15 March 2022) . - No. 128136.
DOI: https://doi.org/10.1016/j.jhazmat.2021.128136

Leitner, Lisa-Cathrin ; Schneider, Rika ; Steiner, Thomas ; Stenzel, Martina H. ; Freitag, Ruth ; Greiner, Andreas:
Efficient Synthesis and Wetting Characteristics of Amphiphilic Galactose-PLA Block Copolymers : A Potential Additive for the Accelerated Biodegradation of Micro‐ and Nanoplastics.
In: Macromolecular Chemistry and Physics. (8 March 2022) . - No. 2100431.
DOI: https://doi.org/10.1002/macp.202100431

Ramsperger, Anja ; Jasinski, Julia ; Völkl, Matthias ; Witzmann, T. ; Meinhart, Marcel ; Jérôme, Valérie ; Kretschmer, Winfried ; Freitag, Ruth ; Senker, Jürgen ; Fery, Andreas ; Kress, Holger ; Scheibel, Thomas ; Laforsch, Christian:
Supposedly identical microplastic particles substantially differ in their material properties influencing particle-cell interactions and cellular responses.
In: Journal of Hazardous Materials. Vol. 425 (5 March 2022) . - 127961.
DOI: https://doi.org/10.1016/j.jhazmat.2021.127961

Tremmel, Stephan ; Luo, Xiongxin ; Rothammer, Benedict ; Seynstahl, Armin ; Wang, Bo ; Rosenkranz, Andreas ; Marian, Max ; Zhu, Laipan:
Evaluation of DLC, MoS₂, and Ti₃C₂Tₓ thin films for triboelectric nanogenerators.
In: Nano Energy. Vol. 97 (March 2022) . - No. 107185.
DOI: https://doi.org/10.1016/j.nanoen.2022.107185

Volltext
Baakes, Florian ; Lüthe, M. ; Gerasimov, M. ; Laue, V. ; Röder, Fridolin ; Balbuena, P. B. ; Krewer, U.:
Unveiling the interaction of reactions and phase transition during thermal abuse of Li-ion batteries.
In: Journal of Power Sources. Vol. 522 (22 February 2022) . - No. 230881.
DOI: https://doi.org/10.1016/j.jpowsour.2021.230881

Volltext
Roy, Barsheek ; Rosin, Andreas ; Gerdes, Thorsten ; Schafföner, Stefan:
Revealing the surface structural cause of scratch formation on soda-lime-silica glass.
In: Scientific Reports. Vol. 12 (17 February 2022) . - No. 2681.
DOI: https://doi.org/10.1038/s41598-022-06649-y

Jahn, Leonard ; Katzer, Felix ; Danzer, Michael A.:
Combined dilatometry and voltage analysis for a reliable detection of lithium deposition on graphitic anodes.
In: Journal of Power Sources. Vol. 520 (1 February 2022) . - No. 230870.
DOI: https://doi.org/10.1016/j.jpowsour.2021.230870

Beck, Markus ; Fischerauer, Gerhard:
Modeling Warp in Corrugated Cardboard Based on Homogenization Techniques for In-Process Measurement Applications.
In: Applied Sciences. Vol. 12 (February 2022) Issue 3 . - No. 1684.
DOI: https://doi.org/10.3390/app12031684

Volltext
Inui, Haruyuki ; Kishida, Kyosuke ; Li, Le ; Manzoni, Anna M. ; Haas, Sebastian ; Glatzel, Uwe:
Uniaxial Mechanical Properties of Face-Centered Cubic Single- and Multiphase High-Entropy Alloys.
In: MRS Bulletin. Vol. 47 (February 2022) . - pp. 1-7.
DOI: https://doi.org/10.1557/s43577-022-00280-y

Lee, Chi-Hung ; Chin, Hsu-Hsuan ; Zeng, Kun-Yuan ; Chang, Yao-Jen ; Yeh, An-Chou ; Yeh, Jien-Wei ; Lin, Su-Jien ; Wang, Chun-Chieh ; Glatzel, Uwe ; Huang, E-Wen:
Tailoring Ferrimagnetic Transition Temperatures, Coercivity Fields, and Saturation Magnetization by Modulating Mn Concentration in (CoCrFeNi)₁₋ₓMnₓ High-Entropy Alloys.
In: Frontiers in Materials. Vol. 9 (28 January 2022) . - No. 824285.
DOI: https://doi.org/10.3389/fmats.2022.824285

Volltext
Körber, Selina ; Fleck, Michael ; Völkl, Rainer ; Glatzel, Uwe:
Anisotropic Growth of the Primary Dendrite Arms in a Single-Crystal Thin-Walled Nickel-Based Superalloy.
In: Advanced Engineering Materials. (19 January 2022) . - No. 2101332.
DOI: https://doi.org/10.1002/adem.202101332

Volltext
Uribe Gómez, Juan Manuel ; Schönfeld, Dennis ; Posada Murcia, Andrés ; Roland, Michel-Manuel ; Caspari, Anja ; Synytska, Alla ; Salehi, Sahar ; Pretsch, Thorsten ; Ionov, Leonid:
Fibrous Scaffolds for Muscle Tissue Engineering Based on Touch‐Spun Poly(Ester‐Urethane) Elastomer.
In: Macromolecular Bioscience. Vol. 22 (10 January 2022) Issue 4 . - No. 2100427.
DOI: https://doi.org/10.1002/mabi.202100427

Volltext
Steiner, Carsten ; Hagen, Gunter ; Kogut, Iurii ; Fritze, Holger ; Moos, Ralf:
Analysis of defect chemistry and microstructural effects of non-stoichiometric ceria by the high-temperature microwave cavity perturbation method.
In: Journal of the European Ceramic Society. Vol. 42 (2022) Issue 2 . - pp. 499-511.
DOI: https://doi.org/10.1016/j.jeurceramsoc.2021.08.053

Volltext
Reul, Andreas ; Thiessen, Johannes ; Jess, Andreas ; Scholz, Judith ; Heykamp, Angela:
Co-Feeding of Ethene, Propene, and 1-Butene to Co-Mn-Catalyzed Fischer-Tropsch Synthesis.
In: Chemical Engineering & Technology. Vol. 45 (2022) Issue 2 . - pp. 275-282.
DOI: https://doi.org/10.1002/ceat.202100488

Ferreira da Silva, Pollyana ; Ferreira Gomes Lobo, Bruna ; Silva Lobo, Carlos Manuel ; Carmo, Marcelo ; Roth, Christina ; Colnago, Luiz Alberto:
Composite Graphite–Epoxy Electrodes for In Situ Electrochemistry Coupling with High Resolution NMR.
In: ACS Omega. Vol. 7 (2022) Issue 6 . - pp. 4991-5000.
DOI: https://doi.org/10.1021/acsomega.1c05823

Volltext
Chan, Nicholas J. ; Lentz, Sarah ; Gurr, Paul A. ; Tan, Shereen ; Scheibel, Thomas ; Qiao, Greg G.:
Crosslinked Polypeptide Films via RAFT-Mediated Continuous Assembly of Polymers.
In: Angewandte Chemie International Edition. Vol. 61 (2022) Issue 9 . - e202112842.
DOI: https://doi.org/10.15495/EPub_UBT_00006094

Roppel, Matthias ; Rieg, Frank ; Tremmel, Stephan:
Definition and Determination of Fin Substitution Factors Accelerating Thermal Simulations.
In: Applied Sciences. Vol. 12 (2022) Issue 9 . - No. 4449.
DOI: https://doi.org/10.3390/app12094449

Opel, Thorsten ; Langhof, Nico ; Krenkel, Walter:
Development and tribological studies of a novel metal‐ceramic hybrid brake disc.
In: International Journal of Applied Ceramic Technology. Vol. 19 (2022) Issue 1 . - pp. 62-74.
DOI: https://doi.org/10.1111/ijac.13826

Hoffmann, Hendrik ; Paulisch, Melanie Cornelia ; Gebhard, Marcus ; Osiewacz, Jens ; Kutter, Maximilian ; Hilger, André ; Arlt, Tobias ; Kardjilov, Nikolay ; Ellendorff, Barbara ; Beckmann, Felix ; Markötter, Henning ; Luik, Marius ; Turek, Thomas ; Manke, Ingo ; Roth, Christina:
Development of a Modular Operando Cell for X-ray Imaging of Strongly Absorbing Silver-Based Gas Diffusion Electrodes.
In: Journal of the Electrochemical Society. Vol. 169 (2022) Issue 4 . - No. 044508.
DOI: https://doi.org/10.1149/1945-7111/ac6220

Volltext
Popp, Tobias ; Weiß, Andreas P. ; Heberle, Florian ; Winkler, Julia ; Scharf, Rüdiger ; Weith, Theresa ; Brüggemann, Dieter:
Experimental Characterization of an Adaptive Supersonic Micro Turbine for Waste Heat Recovery Applications.
In: Energies. Vol. 15 (2022) Issue 1 . - No. 25.
DOI: https://doi.org/10.3390/en15010025

Zhou, Wei ; Meiser, Matthias ; Wich, Felix ; Liensdorf, Tom ; Freudenberg, Wolfgang ; Li, Yang ; Langhof, Nico ; Krenkel, Walter:
Fiber orientation dependence of tribological behavior of short carbon fiber reinforced ceramic matrix composites.
In: Journal of the American Ceramic Society. Vol. 105 (2022) Issue 1 . - pp. 538-552.
DOI: https://doi.org/10.1111/jace.18075

Volltext
Ribeiro, Luiz F. B. ; Cunha, Ricardo S. ; de Noni Jr, Agenor ; Machado, Ricardo A. F. ; Motz, Günter ; González, Sergio Y. G.:
Flexible and Porous Nonwoven SiCN Ceramic Material via Electrospinning of an Optimized Silazane Solution.
In: Advanced Engineering Materials. Vol. 24 (2022) Issue 1 . - No. 2100321.
DOI: https://doi.org/10.15495/EPub_UBT_00005969

Volltext
Roppel, Matthias ; Lange, Christopher ; Zimmermann, Markus ; Alber-Laukant, Bettina ; Rieg, Frank ; Tremmel, Stephan:
Further developments of the simulation tool Z88ENSI for the accelerated determination of temperature fields in dual purpose casks.
In: ENSI Erfahrungs- und Forschungsbericht. (2022) . - pp. 292-300.

Volltext
Bresch, Sophie ; Mieller, Björn ; Mrkwitschka, Paul ; Moos, Ralf ; Rabe, Torsten:
Glass-ceramic composites as insulation material for thermoelectric oxide multilayer generators.
In: Journal of the American Ceramic Society. Vol. 105 (2022) Issue 3 . - pp. 2140-2149.
DOI: https://doi.org/10.1111/jace.18235

Volltext
Heinz, Michael ; Callsen, Christoph ; Stöcklein, Waldemar ; Altstädt, Volker ; Ruckdäschel, Holger:
Halogen-free flame-retardant cable compounds : Influence of magnesium-di-hydroxide filler and coupling agent on EVA/LLDPE blend system morphology.
In: Polymer Engineering & Science. Vol. 62 (2022) Issue 2 . - pp. 461-471.
DOI: https://doi.org/10.15495/EPub_UBT_00006112

Volltext
Schorzmann, Johann ; Pezold, Daniel ; Kemnitzer, Jan Felix ; Kalusche, Alexander:
Hybridprozess aus Spritzguss und additiver Fertigung.
In: Maschinenbau : die Deutschland-Ausgabe des Schweizer Industriemagazins. Vol. 2 (2022) Issue 1 . - pp. 30-33.
DOI: https://doi.org/10.1007/s44029-021-0113-1

Benedikt, Peter ; Stoeckel, Daniela ; Scherer, Torsten ; Kübel, Christian ; Roth, Christina ; Melke, Julia:
Impact of catalyst support morphology on 3D electrode structure and polymer electrolyte membrane fuel cell performance.
In: Electrochemical Science Advances. (2022) . - No. e2100121.
DOI: https://doi.org/10.1002/elsa.202100121

Volltext
Lechner, Annika ; Trossmann, Vanessa T. ; Scheibel, Thomas:
Impact of Cell Loading of Recombinant Spider Silk Based Bioinks on Gelation and Printability.
In: Macromolecular Bioscience. Vol. 22 (2022) Issue 3 . - No. 2100390.
DOI: https://doi.org/10.15495/EPub_UBT_00006099

Volltext
Dickes, Daniel ; Öztürk, Beyza ; Völkl, Rainer ; Galetz, Mathias C. ; Glatzel, Uwe:
Improving the Adhesion of a Hard Oxide Layer on Ti6Al4V by a Three-Step Thermal Oxidation Process.
In: Advanced Engineering Materials. Vol. 24 (2022) Issue 3 . - No. 2100864.
DOI: https://doi.org/10.1002/adem.202100864

Öztürk, Beyza ; Mengis, L. ; Dickes, Daniel ; Glatzel, Uwe ; Galetz, Mathias C.:
Influence of Water Vapor and Temperature on the Oxide Scale Growth and Alpha-Case Formation in Ti-6Al-4V Alloy.
In: Oxidation of Metals. Vol. 97 (2022) . - pp. 241-260.
DOI: https://doi.org/10.1007/s11085-021-10088-x

Volltext
Prucker, Tobias ; Lamberty, Aliena ; Thiessen, Johannes ; König, Matthias ; Jess, Andreas:
Kinetics of dehydrogenation of n-octane on a promoted Pt-catalyst.
In: Chemical Engineering Journal. Vol. 442 (2022) Issue 2 . - No. 136233.
DOI: https://doi.org/10.1016/j.cej.2022.136233

Volltext
Horcher, Alexander ; Tangermann-Gerk, Katja ; Krenkel, Walter ; Schmidt, Michael ; Bordia, Rajendra K. ; Motz, Günter:
Laser pyrolyzed organosilazane‐based Al/ZrO₂ composite coating on stainless steel : Resulting microstructure and mechanical properties.
In: International Journal of Applied Ceramic Technology. Vol. 19 (2022) Issue 2 . - pp. 856-865.
DOI: https://doi.org/10.1111/ijac.13917

Tremmel, Stephan ; Marian, Max:
Machine Learning in Tribology : More than Buzzwords?
In: Lubricants. Vol. 10 (2022) Issue 4 . - No. 68.
DOI: https://doi.org/10.3390/lubricants10040068

Volltext
Apsite, Indra ; Salehi, Sahar ; Ionov, Leonid:
Materials for Smart Soft Actuator Systems.
In: Chemical Reviews. Vol. 122 (2022) Issue 1 . - pp. 1349-1415.
DOI: https://doi.org/10.1021/acs.chemrev.1c00453

Volltext
Posada Murcia, Andrés ; Uribe Gómez, Juan Manuel ; Förster, Stephan ; Sommer, Jens-Uwe ; Dulle, Martin ; Ionov, Leonid:
Mechanism of Behavior of Two-Way Shape Memory Polymer under Constant Strain Conditions.
In: Macromolecules. Vol. 55 (2022) Issue 5 . - pp. 1680-1689.
DOI: https://doi.org/10.1021/acs.macromol.1c02564

Rautenberg, Max ; Gernhard, Marius ; Radnik, Jörg ; Witt, Julia ; Roth, Christina ; Emmerling, Franziska:
Mechanochemical Synthesis of Fluorine-Containing Co-Doped Zeolitic Imidazolate Frameworks for Producing Electrocatalysts.
In: Frontiers in Chemistry. Vol. 10 (2022) .
DOI: https://doi.org/10.3389/fchem.2022.840758

Volltext
Nazarenus, Tobias ; Schlesier, Kira ; Lebeda, Flora ; Retsch, Markus ; Moos, Ralf:
Microstrain release decouples electronic and thermal conductivity in powder aerosol deposited films.
In: Materials Letters. Vol. 322 (2022) . - No. 132461.
DOI: https://doi.org/10.1016/j.matlet.2022.132461

Volltext
Zelder, Stefan ; Rosin, Andreas ; Helling, Dominik ; Gerdes, Thorsten ; Scharfe, Friedbert ; Schafföner, Stefan:
Mineral Composite Plaster Containing Hollow Glass Microspheres and CSA Cement for Building Insulation.
In: Applied Sciences. Vol. 12 (2022) Issue 3 . - No. 1152.
DOI: https://doi.org/10.3390/app12031152

Volltext
Walter, Stefanie ; Schwanzer, Peter ; Steiner, Carsten ; Hagen, Gunter ; Rabl, Hans-Peter ; Dietrich, Markus ; Moos, Ralf:
Mixing Rules for an Exact Determination of the Dielectric Properties of Engine Soot Using the Microwave Cavity Perturbation Method and Its Application in Gasoline Particulate Filters.
In: Sensors. Vol. 22 (2022) Issue 9 . - No. 3311.
DOI: https://doi.org/10.3390/s22093311

Volltext
Linz, Mario ; Exner, Jörg ; Nazarenus, Tobias ; Kita, Jaroslaw ; Moos, Ralf:
Mobile sealing and repairing of damaged ceramic coatings by powder aerosol deposition at room temperature.
In: Open Ceramics. Vol. 10 (2022) . - No. 100253.
DOI: https://doi.org/10.1016/j.oceram.2022.100253

Mosbacher, Mike ; Hilzenthaler, Marius ; Galetz, Mathias ; Glatzel, Uwe:
Oxygen Diffusion Hardened Zirconium Alloy ZrNb7 : Tribological Properties Derived from Calo Wear and Wheel on Flat Experiments.
In: Tribology International. Vol. 165 (2022) . - No. 107304.
DOI: https://doi.org/10.1016/j.triboint.2021.107304

Volltext
Uwanyuze, R. Sharon ; Enright, Lucas ; Zhang, Jiyao ; Schafföner, Stefan:
Preparation of concrete specimen for internal sulfate attack analysis using electron backscatter diffraction.
In: International Journal of Applied Ceramic Technology. Vol. 19 (2022) Issue 3 . - pp. 1195-1207.
DOI: https://doi.org/10.15495/EPub_UBT_00006098

Volltext
Koeck, Kim ; Salehi, Sahar ; Humenik, Martin ; Scheibel, Thomas:
Processing of Continuous Non-Crosslinked Collagen Fibers for Microtissue Formation at the Muscle-Tendon Interface.
In: Advanced Functional Materials. Vol. 32 (2022) Issue 15 . - No. 2112238.
DOI: https://doi.org/10.15495/EPub_UBT_00006100

Volltext
Winkelbauer, Jonas ; Puchas, Georg ; Schafföner, Stefan ; Krenkel, Walter:
Short fiber-reinforced oxide fiber composites.
In: International Journal of Applied Ceramic Technology. Vol. 19 (2022) Issue 2 . - pp. 1136-1147.
DOI: https://doi.org/10.1111/ijac.13931

Helbig, Christoph ; Kondo, Yasushi ; Nakamura, Shinichiro:
Simultaneously tracing the fate of seven metals at a global level with MaTrace‐multi.
In: Journal of Industrial Ecology. (2022) .
DOI: https://doi.org/10.1111/JIEC.13219

Flauder, Stefan ; Bombarda, Ilaria ; D’Ambrosio, Roberto ; Langhof, Nico ; Lazzeri, Andrea ; Krenkel, Walter ; Schafföner, Stefan:
Size effect of carbon fiber-reinforced silicon carbide composites (C/C-SiC) : Part 2 - tensile testing with alignment device.
In: Journal of the European Ceramic Society. Vol. 42 (2022) Issue 4 . - pp. 1227-1237.
DOI: https://doi.org/10.1016/j.jeurceramsoc.2021.11.044

Krauß, Sebastian ; Seynstahl, Armin ; Tremmel, Stephan ; Meyer, Bernd ; Bitzek, Erik ; Göken, Mathias ; Yokosawa, Tadahiro ; Apeleo Zubiri, Benjamin ; Spiecker, Erdmann ; Merle, Benoit:
Structural reorientation and compaction of porous MoS₂ coatings during wear testing.
In: Wear. (2022) . - No. 204339.
DOI: https://doi.org/10.1016/j.wear.2022.204339

Helbig, Christoph ; Huether, Jonas ; Joachimsthaler, Charlotte ; Lehmann, Christian ; Raatz, Simone ; Thorenz, Andrea ; Faulstich, Martin ; Tuma, Axel:
A terminology for downcycling.
In: Journal of Industrial Ecology. (2022) .
DOI: https://doi.org/10.1111/jiec.13289

Volltext
Mitre, Cirlei Igreja Nascimento ; Ferreira Gomes Lobo, Bruna ; Paris, Elaine ; Silva Lobo, Carlos Manuel ; Roth, Christina ; Colnago, Luiz Alberto:
Use of Time Domain Nuclear Magnetic Resonance Relaxometry to Monitor the Effect of Magnetic Field on the Copper Corrosion Rate in Real Time.
In: Magnetochemistry. Vol. 8 (2022) Issue 4 . - No. 40.
DOI: https://doi.org/10.3390/magnetochemistry8040040

Schwarz, Sebastian ; Grillenberger, Hannes ; Graf-Goller, Oliver ; Bartz, Marcel ; Tremmel, Stephan ; Wartzack, Sandro:
Using Machine Learning Methods for Predicting Cage Performance Criteria in an Angular Contact Ball Bearing.
In: Lubricants. Vol. 10 (2022) Issue 2 . - No. 25.
DOI: https://doi.org/10.3390/lubricants10020025

Volltext
Langhof, Nico:
Walter Krenkel – CMC-pioneer and dedicated expert on ceramics.
In: International Journal of Applied Ceramic Technology. Vol. 19 (2022) Issue 1 . - pp. 5-6.
DOI: https://doi.org/10.15495/EPub_UBT_00006114

Rothammer, Benedict ; Marian, Max ; Rummel, Florian ; Schröder, Stefan ; Uhler, Maximilian ; Kretzer, J. Philippe ; Tremmel, Stephan ; Wartzack, Sandro:
Rheological behavior of an artificial synovial fluid : influence of temperature, shear rate and pressure.
In: Journal of the Mechanical Behavior of Biomedical Materials. Vol. 115 (14 December 2021) . - pp. 1-8. - No. 104278.
DOI: https://doi.org/10.1016/j.jmbbm.2020.104278

Volltext
Koop, Carina ; Grosse Erdmann, Julian ; Koller, Jan ; Döpper, Frank:
Circular Business Models for Remanufacturing in the Electric Bicycle Industry.
In: Frontiers in Sustainability. Vol. 2 (1 December 2021) . - 16 S..
DOI: https://doi.org/10.3389/frsus.2021.785036

Haas, Sebastian ; Manzoni, Anna M. ; Holzinger, Markus ; Glatzel, Uwe:
Influence of high melting elements on microstructure, tensile strength and creep resistance of the compositionally complex alloy Al10Co25Cr8Fe15Ni36Ti6.
In: Materials Chemistry and Physics. Vol. 274 (December 2021) . - No. 125163.
DOI: https://doi.org/10.1016/j.matchemphys.2021.125163

Katzer, Felix ; Jahn, Leonard ; Hahn, Markus ; Danzer, Michael A.:
Model-based lithium deposition detection method using differential voltage analysis.
In: Journal of Power Sources. Vol. 512 (November 2021) . - No. 230449.
DOI: https://doi.org/10.1016/j.jpowsour.2021.230449

Volltext
Seidenath, Dimitri ; Holzinger, Anja ; Kemnitz, Klara ; Langhof, Nico ; Lücker, Darleen ; Opel, Thorsten ; Otti, Oliver ; Feldhaar, Heike:
Individual vs. Combined Short-Term Effects of Soil Pollutants on Colony Founding in a Common Ant Species.
In: Frontiers in Insect Science. (29 October 2021) .
DOI: https://doi.org/10.3389/finsc.2021.761881

Hilzenthaler, Marius ; Bifano, Luca ; Scherm, Florian ; Fischerauer, Gerhard ; Seemann, Andrea ; Glatzel, Uwe:
Characterization of recycled AISI 904L superaustenitic steel powder and influence on selective laser melted parts.
In: Powder Technology. Vol. 391 (October 2021) . - pp. 57-68.
DOI: https://doi.org/10.1016/j.powtec.2021.06.011

Hübner, Fabian ; Brückner, Alexander ; Dickhut, Tobias ; Altstädt, Volker ; Rios de Anda, Agustín ; Ruckdäschel, Holger:
Low temperature fatigue crack propagation in toughened epoxy resins aimed for filament winding of type V composite pressure vessels.
In: Polymer Testing. Vol. 102 (October 2021) . - No. 107323.
DOI: https://doi.org/10.1016/j.polymertesting.2021.107323

Hahn, Markus ; Grüne, Lars ; Plank, Christian ; Katzer, Felix ; Rüther, Tom ; Jahn, Leonard ; Danzer, Michael A.:
Model predictive fast charging control by means of a real-time discrete electrochemical model.
In: Journal of Energy Storage. Vol. 42 (October 2021) . - No. 103056.
DOI: https://doi.org/10.1016/j.est.2021.103056

Becher, Daniel ; Bauer, Marius ; Döring, Harry ; Böse, Olaf ; Friess, Benedikt ; Danzer, Michael A.:
Preventing thermal propagation in battery packs using enthalpy supported thermal barriers.
In: Journal of Energy Storage. Vol. 42 (October 2021) . - No. 103057.
DOI: https://doi.org/10.1016/j.est.2021.103057

Marian, Max ; Tremmel, Stephan:
Current Trends and Applications of Machine Learning in Tribology : A Review.
In: Lubricants. Vol. 9 (1 September 2021) Issue 9 . - No. 86.
DOI: https://doi.org/10.3390/lubricants9090086

Dollinger, Manfred ; Fischerauer, Gerhard:
Model-based Range Prediction for Electric Cars and Trucks under Real-World Conditions.
In: Energies. Vol. 14 (September 2021) Issue 18 . - 27 S..
DOI: https://doi.org/10.3390/en14185804

Gräf, Kevin ; Fischerauer, Gerhard:
Qualifizierung von Gleichstrom-Elektrizitätszählern für Schnellladestationen.
In: Technisches Messen. Vol. 88 (September 2021) Issue 9 . - pp. 499-507.
DOI: https://doi.org/10.1515/teme-2021-0007

Wolff-Goodrich, Silas ; Haas, Sebastian ; Glatzel, Uwe ; Liebscher, Christian H.:
Towards superior high temperature properties in low density ferritic AlCrFeNiTi compositionally complex alloys.
In: Acta Materialia. Vol. 216 (September 2021) .
DOI: https://doi.org/10.1016/j.actamat.2021.117113

Volltext
Weigert, Sebastian ; Gagsteiger, Andreas ; Menzel, Teresa ; Höcker, Birte:
A versatile assay platform for enzymatic poly(ethylene-terephthalate) degradation.
In: Protein Engineering, Design & Selection. Vol. 34 (24 August 2021) . - 9 S..
DOI: https://doi.org/10.1093/protein/gzab022

Volltext
Koop, Carina ; Koller, Jan ; Große Erdmann, Julian ; Klein, Viktor:
Kreislaufwirtschaft in der Elektrofahrradbranche : Untersuchung zur Refabrikation als Lösungsansatz für eine Kreislaufführung von Elektrofahrrädern.
In: Müll und Abfall. (10 August 2021) Issue 8 . - pp. 437-443.
DOI: https://doi.org/10.37307/j.1863-9763.2021.08.05

Volltext
Schorzmann, Johann ; Hofmann, Andreas:
Wie Leichtbau die Produktivität und Bauteilqualität bei AM-Anlagen erhöht.
In: Mission additive. (10 August 2021) .

Volltext
Rudolph, Julia ; Völkl, Matthias ; Jérôme, Valérie ; Scheibel, Thomas ; Freitag, Ruth:
Noxic effects of polystyrene microparticles on murine macrophages and epithelial cells.
In: Scientific Reports. Vol. 11 (3 August 2021) . - No. 15702.
DOI: https://doi.org/10.1038/s41598-021-95073-9

Roppel, Matthias ; Lange, Christopher ; Roith, Bernd ; Rieg, Frank:
Accelerated Parameterized computation of the Thermal Behaviour of Dual Purpose casks.
In: Proceedings of the Design Society. Vol. 1 (August 2021) . - pp. 313-322.
DOI: https://doi.org/10.1017/pds.2021.32

Körber, Selina ; Völkl, Rainer ; Glatzel, Uwe:
3D printed polymer positive models for the investment casting of extremely thin-walled single crystals.
In: Journal of Materials Processing Technology. Vol. 293 (July 2021) . - No. 117095.
DOI: https://doi.org/10.1016/j.jmatprotec.2021.117095

Mahr, Alexander ; Hofmann, Andreas:
Nachbearbeitungsverfahren in der additiven Fertigung : Mikrostrahlen, Plasmapolieren oder Gleitschleifen?
In: MAV : Innovation in der spanenden Fertigung. (July 2021) Issue 6 .

Laue, Vincent ; Röder, Fridolin ; Krewer, Ulrike:
Practical identifiability of electrochemical P2D models for lithium-ion batteries.
In: Journal of Applied Electrochemistry. Vol. 51 (26 June 2021) . - pp. 1253-1265.
DOI: https://doi.org/10.1007/s10800-021-01579-5

Hofmann, Andreas ; Mahr, Alexander ; Bay, Christian ; Döpper, Frank:
Verzug bei pulverbettbasiertem Schmelzen von TiAl6V4 : Einflüsse der Bauteilgeometrie und Wärmebehandlung.
In: wt Werkstattstechnik online. Vol. 111 (June 2021) Issue 6 . - pp. 372-377.
DOI: https://doi.org/10.37544/1436-4980-2021-06-16

Volltext
Mahr, Alexander ; Hofmann, Andreas:
Nachbearbeitungsverfahren in der additiven Fertigung : Mikrostrahlen, Plasmapolieren oder Gleitschleifen?
In: additive : Das Magazin für generative Fertigung. (12 May 2021) Issue 2 . - pp. 14-16.

Volltext
Bay, Christian ; Mahr, Alexander ; Groneberg, Hajo ; Döpper, Frank:
Lean Production to Increase Reproducibility and Work Safety in the Laser Beam Melting Process Chain.
In: International Journal of Industrial and Manufacturing Engineering. Vol. 15 (10 May 2021) Issue 6 . - pp. 278-283.

Standau, Tobias ; Nofar, Mohammadreza ; Dörr, Dominik ; Ruckdäschel, Holger ; Altstädt, Volker:
A Review on Multifunctional Epoxy-Based Joncryl® ADR Chain Extended Thermoplastics.
In: Polymer Reviews. (5 May 2021) . - pp. 1-55.
DOI: https://doi.org/10.1080/15583724.2021.1918710

Volltext
Malashchuk, Vladimir ; Jess, Andreas ; Moos, Ralf:
Determination of water loading of supported ionic liquids by microwave analysis : A contribution for operando monitoring of gas drying by adsorption.
In: Sensors and Actuators B: Chemical. Vol. 335 (May 2021) . - No. 129646.
DOI: https://doi.org/10.1016/j.snb.2021.129646

Bernauer, Christian ; Grohmann, Sandra ; Angermann, Philipp ; Dickes, Daniel ; Holzberger, Florian ; Amend, Pierre ; Zaeh, Michael F.:
Investigation of the Cause-Effect Relationships between the Exothermic Reaction and the Microstructures of Reactive Ni-Al Particles Produced by High Energy Planetary Ball Milling.
In: Metals. Vol. 11 (May 2021) Issue 6 . - No. 876.
DOI: https://doi.org/10.3390/met11060876

Peter, Ronny ; Bifano, Luca ; Fischerauer, Gerhard:
Monte Carlo Method for the Reduction of Measurement Errors in the Material Parameter Estimation with Cavities.
In: Technisches Messen. Vol. 88 (May 2021) Issue 5 . - pp. 303-310.
DOI: https://doi.org/10.1515/teme-2021-0001

Seynstahl, Armin ; Krauß, Sebastian ; Bitzek, Erik ; Meyer, Bernd ; Merle, Benoit ; Tremmel, Stephan:
Microstructure, Mechanical Properties and Tribological Behavior of Magnetron-Sputtered MoS₂ Solid Lubricant Coatings Deposited under Industrial Conditions.
In: Coatings. Vol. 11 (15 April 2021) Issue 4 . - p. 455.
DOI: https://doi.org/10.3390/coatings11040455

Redka, David ; Gadelmeier, Christian ; Winter, Jan ; Spellauge, Maximilian ; Eulenkamp, Constanze ; Calta, Pavel ; Glatzel, Uwe ; Minár, J. ; Huber, Heinz P.:
Sub-picosecond single-pulse laser ablation of the CrMnFeCoNi high entropy alloy and comparison to stainless steel AISI 304.
In: Applied Surface Science. Vol. 544 (1 April 2021) . - No.148839.
DOI: https://doi.org/10.1016/j.apsusc.2020.148839

Menberg, Kathrin ; Heberle, Florian ; Bott, Christoph ; Brüggemann, Dieter ; Bayer, Peter:
Environmental performance of a geothermal power plant using a hydrothermal resource in the Southern German Molasse Basin.
In: Renewable Energy. Vol. 167 (April 2021) . - pp. 20-31.
DOI: https://doi.org/10.1016/j.renene.2020.11.028

Volltext
Solomko, Valentyn ; Oezdamar, Oguzhan ; Weigel, Robert ; Hagelauer, Amelie:
Penta-Band Inverted-F Antenna Tuned by High-Voltage Switchable RF Capacitors.
In: IEEE Open Journal of Antennas and Propagation. Vol. 2 (3 March 2021) . - pp. 375-384.
DOI: https://doi.org/10.1109/OJAP.2021.3063528

Volltext
Held, Alexander ; Puchas, Georg ; Müller, Ferdinand ; Krenkel, Walter:
Direct ink writing of water-based C–SiC pastes for the manufacturing of SiSiC components.
In: Open Ceramics. Vol. 5 (March 2021) . - No. 100054.
DOI: https://doi.org/10.1016/j.oceram.2020.100054

Pechmann, Stefan ; Mai, Timo ; Völkel, Matthias ; Mahadevaiah, Mamathamba K. ; Perez, Eduardo ; Perez-Bosch Quesada, Emilio ; Reichenbach, Marc ; Wenger, Christian ; Hagelauer, Amelie:
A Versatile, Voltage-Pulse Based Read and Programming Circuit for Multi-Level RRAM Cells.
In: Electronics. Vol. 10 (24 February 2021) Issue 5 .
DOI: https://doi.org/10.3390/electronics10050530

Volltext
Solomko, Valentyn ; Oezdamar, Oguzhan ; Weigel, Robert ; Hagelauer, Amelie:
CMOS RF Switch With Fast Discharge Feature.
In: IEEE Solid-State Circuits Letters. Vol. 4 (17 February 2021) . - pp. 68-71.
DOI: https://doi.org/10.1109/LSSC.2021.3059918

Neubauer, Vanessa J. ; Döbl, Annika ; Scheibel, Thomas:
Silk-Based Materials for Hard Tissue Engineering.
In: Materials. Vol. 14 (1 February 2021) Issue 3 .
DOI: https://doi.org/10.3390/ma14030674

Volltext
Bifano, Luca ; Fischerauer, Alice ; Liedtke, Alfred ; Fischerauer, Gerhard:
Characterization of Sand and Sand-Binder Systems from the Foundry Industry with Electrical Impedance Spectroscopy.
In: Journal of Sensors and Sensor Systems. Vol. 10 (February 2021) Issue 1 . - pp. 43-51.
DOI: https://doi.org/10.5194/jsss-10-43-2021

Weikert, Tim ; Wartzack, Sandro ; Baloglu, Maximilian Volkan ; Willner, Kai ; Gabel, Stefan ; Merle, Benoit ; Pineda, Fabiola ; Walczak, Magdalena ; Marian, Max ; Rosenkranz, Andreas ; Tremmel, Stephan:
Evaluation of the surface fatigue behavior of amorphous carbon coatings through cyclic nanoindentation.
In: Surface and Coatings Technology. Vol. 407 (February 2021) . - No. 126769.
DOI: https://doi.org/10.1016/j.surfcoat.2020.126769

Küfner, Thomas ; Schönig, Stefan ; Jasinski, Richard ; Ermer, Andreas:
Vertical data continuity with lean edge analytics for industry 4.0 production.
In: Computers in Industry. Vol. 125 (February 2021) . - No. 103389.
DOI: https://doi.org/10.1016/j.compind.2020.103389

Volltext
Maiwald, Tim ; Potschka, Julian ; Kolb, Katharina ; Dietz, Marco ; Hagelauer, Amelie ; Visweswaran, Akshay ; Weigel, Robert:
A Broadband Zero-IF Down-Conversion Mixer in 130 nm SiGe BiCMOS for Beyond 5G Communication Systems in D-Band.
IEEE
In: IEEE Transactions on Circuits and Systems II : Express Briefs. Vol. 68 (21 January 2021) Issue 1 . - p. 1.
DOI: https://doi.org/10.1109/TCSII.2021.3053344

Binder, Markus ; Mandl, Magdalena ; Zaubitzer, Steve ; Wohlfahrt-Mehrens, Margret ; Passerini, Stefano ; Böse, Olaf ; Danzer, Michael A. ; Marinaro, Mario:
Sodium Cyclopentadienide as a New Type of Electrolyte for Sodium Batteries.
In: ChemElectroChem. Vol. 8 (18 January 2021) Issue 2 . - pp. 365-369.
DOI: https://doi.org/10.1002/celc.202001290

Volltext
Manzoni, Anna M. ; Dubois, Felix ; Mousa, Marwan S. ; von Schlippenbach, Christoph ; Többens, Daniel M. ; Yesilcicek, Yasemin ; Zaiser, Erika ; Hesse, René ; Haas, Sebastian ; Glatzel, Uwe:
On the Formation of Eutectics in Variations of the Al10Co25Cr8Fe15Ni36Ti6 Compositionally Complex Alloy.
In: Metallurgical and Materials Transactions A. Vol. 52 (January 2021) Issue 1 . - pp. 143-150.
DOI: https://doi.org/10.1007/s11661-020-06091-7

Volltext
Constante Ibarra, Gissela Katherine ; Apsite, Indra ; Alkhamis, Hanin ; Dulle, Martin ; Schwarzer, Madeleine ; Caspari, Anja ; Synytska, Alla ; Salehi, Sahar ; Ionov, Leonid:
4D Biofabrication Using a Combination of 3D Printing and Melt-Electrowriting of Shape-Morphing Polymers.
In: ACS Applied Materials & Interfaces. Vol. 13 (2021) Issue 11 . - pp. 12767-12776.
DOI: https://doi.org/10.1021/acsami.0c18608

Volltext
Reuben, John ; Pechmann, Stefan:
Accelerated Addition in Resistive RAM Array Using Parallel-Friendly Majority Gates.
In: IEEE Transactions on Very Large Scale Integration (VLSI) Systems. Vol. 29 (2021) Issue 6 . - pp. 1108-1121.
DOI: https://doi.org/10.1109/TVLSI.2021.3068470

Schurm, Lasse ; Kern, Christoph ; Jess, Andreas:
Accumulation and distribution of higher hydrocarbons in the pores of a cobalt catalyst during low-temperature Fischer–Tropsch fixed-bed synthesis.
In: Catalysis Science & Technology. Vol. 11 (2021) Issue 18 . - pp. 6143-6154.
DOI: https://doi.org/10.1039/D1CY01305J

Volltext
Schmidt, Fabian ; Zehner, Bastian ; Kaposi, Marlene ; Drees, Markus ; Mink, János ; Korth, Wolfgang ; Jess, Andreas ; Cokoja, Mirza:
Activation of hydrogen peroxide by the nitrate anion in micellar media.
In: Green Chemistry. Vol. 23 (2021) Issue 5 . - pp. 1965-1971.
DOI: https://doi.org/10.1039/D0GC03497E

Pezold, Daniel ; Kemnitzer, Jan:
Additive Fertigung wasserlöslicher Formkerne für die CFK-Bauteilproduktion.
In: Maschinenbau : die Deutschland-Ausgabe des Schweizer Industriemagazins. Vol. 1 (2021) Issue 2 . - pp. 32-35.
DOI: https://doi.org/10.1007/s44029-021-0023-2

Volltext
Gradel, Andy ; Wünning, Joachim Alfred ; Plessing, Tobias ; Jess, Andreas:
Adsorption of Naphthalene on Activated Wood Charcoal Derived from Biomass Gasification.
In: Chemical Engineering & Technology. Vol. 44 (2021) Issue 6 . - pp. 972-979.
DOI: https://doi.org/10.1002/ceat.201900632

Brütting, Christian ; Dreier, J. ; Bonten, C. ; Altstädt, Volker ; Ruckdäschel, Holger:
Amorphous Polylactide Bead Foam : Effect of Talc and Chain Extension on Foaming Behavior and Compression Properties.
In: Journal of Renewable Materials. Vol. 9 (2021) Issue 11 . - pp. 1859-1868.
DOI: https://doi.org/10.32604/jrm.2021.016244

Volltext
Diaz Ariza, Ivonne L. ; Jérôme, Valérie ; Pérez Pérez, León D. ; Freitag, Ruth:
Amphiphilic Graft Copolymers Capable of Mixed-Mode Interaction as Alternative Nonviral Transfection Agents.
In: ACS Applied Bio Materials. Vol. 4 (2021) Issue 2 . - pp. 1268-1282.
DOI: https://doi.org/10.1021/acsabm.0c01123

Dill, Pauline ; Pachel, Florian ; Militzer, Christan ; Held, Alexander ; Puchas, Georg ; Knohl, Stefan ; Krenkel, Walter ; Tegenkamp, Christoph ; Goedel, Werner Andreas:
Atomic layer deposition onto fabrics of carbon and silicon carbide fibers : Preparation of multilayers comprising alumina, titania-furfuryl alcohol hybrid, and titanium phosphate.
In: Journal of Vacuum Science & Technology A. Vol. 39 (2021) Issue 5 . - No. 052406.
DOI: https://doi.org/10.1116/6.0001193

Volltext
Rosnitschek, Tobias ; Glamsch, Johannes ; Lange, Christopher ; Alber-Laukant, Bettina ; Rieg, Frank:
An Automated Open-Source Approach for Debinding Simulation in Metal Extrusion Additive Manufacturing.
In: Designs : open access engineering design journal. Vol. 5 (2021) Issue 1 . - No. 2.
DOI: https://doi.org/10.3390/designs5010002

Rosnitschek, Tobias ; Kleinschrodt, Claudia ; Tremmel, Stephan ; Rieg, Frank:
Automatisierte Entwicklung bionischer Strukturen für die Additive Fertigung.
In: Jahresmagazin Werkstofftechnik : Ingenieurwissenschaften. (2021) . - pp. 50-53.

Loukrakpam, Rameshwori ; Ferreira Gomes Lobo, Bruna ; Kottakkat, Tintula ; Roth, Christina:
A bird's eye perspective of the measurement of oxygen reduction reaction in gas diffusion electrode half-cell set-ups for Pt electrocatalysts in acidic media.
In: Journal of Physics: Materials. Vol. 4 (2021) Issue 4 . - No. 044004.
DOI: https://doi.org/10.1088/2515-7639/ac0319

Selvakumar, Murugesan ; Scheibel, Thomas:
Chitosan-based nanocomposites for medical applications.
In: Journal of Polymer Science. Vol. 59 (2021) Issue 15 . - pp. 1610-1642.
DOI: https://doi.org/10.1002/pol.20210251

Volltext
Ruchets, Anastasiya ; Donker, Nils ; Zosel, Jens ; Schönauer-Kamin, Daniela ; Moos, Ralf ; Guth, Ulrich ; Mertig, Michael:
CO Gas Detection on Pt∣YSZ∣Pt Solid Electrolyte Sensors by Methods Based on Dynamic Voltage Variations.
In: Journal of the Electrochemical Society. Vol. 168 (2021) Issue 11 . - No. 117506.
DOI: https://doi.org/10.1149/1945-7111/ac2fc5

Rosnitschek, Tobias ; Erber, Maximilian ; Hartmann, Christoph ; Volk, Wolfram ; Rieg, Frank ; Tremmel, Stephan:
Combining Structural Optimization and Process Assurance in Implicit Modelling for Casting Parts.
In: Materials. Vol. 14 (2021) Issue 13 . - No. 3715.
DOI: https://doi.org/10.3390/ma14133715

Kogut, Iurii ; Steiner, Carsten ; Wulfmeier, Hendrik ; Wollbrink, Alexander ; Hagen, Gunter ; Moos, Ralf ; Fritze, Holger:
Comparison of the electrical conductivity of bulk and film Ce1–xZrxO2–δ in oxygen-depleted atmospheres at high temperatures.
In: Journal of Materials Science. Vol. 56 (2021) Issue 30 . - pp. 17191-17204.
DOI: https://doi.org/10.1007/s10853-021-06348-5

Wagner, Ricarda ; Schönauer-Kamin, Daniela ; Bäther, Wolfgang ; Moos, Ralf:
Concept study with experimental proof for a new type of detector for gas chromatography.
In: Sensors and Actuators B: Chemical. Vol. 346 (2021) . - No. 130490.
DOI: https://doi.org/10.1016/j.snb.2021.130490

Schmidt, Oke ; Röder, Fridolin:
Conductive Networks and Their Impact on Uncertainty, Degradation, and Failure of Lithium-Ion Battery Electrodes.
In: ACS Applied Energy Materials. Vol. 4 (2021) Issue 5 . - pp. 4845-4860.
DOI: https://doi.org/10.1021/acsaem.1c00416

Wongsamut, Chompunut ; Demleitner, Martin ; Suwanpreedee, Rachaneewan ; Altstädt, Volker ; Manuspiya, Hathaikarn:
Copolymerization approach of soft segment towards the adhesion improvement of polycarbonate-based thermoplastic polyurethane.
In: The Journal of Adhesion. Vol. 97 (2021) Issue 15 . - pp. 1456-1472.
DOI: https://doi.org/10.1080/00218464.2020.1786370

Volltext
Sonnleitner, David ; Schrüfer, Stefan ; Berglund, Linn ; Schubert, Dirk W. ; Lang, Gregor:
Correlating rheology and printing performance of fiber-reinforced bioinks to assess predictive modelling for biofabrication.
In: Journal of Materials Research. Vol. 36 (2021) . - pp. 3821-3832.
DOI: https://doi.org/10.15495/EPub_UBT_00005799

Rosnitschek, Tobias ; Seefeldt, Andressa ; Alber-Laukant, Bettina ; Neumeyer, Thomas ; Altstädt, Volker ; Tremmel, Stephan:
Correlations of Geometry and Infill Degree of Extrusion Additively Manufactured 316L Stainless Steel Components.
In: Materials. Vol. 14 (2021) Issue 18 . - No. 5173.
DOI: https://doi.org/10.3390/ma14185173

Volltext
Schock, Christoph ; Dumler, Jonas ; Döpper, Frank:
Data Acquisition and Preparation - Enabling Data Analytics Projects within Production.
In: Procedia CIRP. Vol. 104 (2021) . - pp. 636-640.
DOI: https://doi.org/10.15495/EPub_UBT_00005915

Santillán‐Saldivar, Jair ; Gaugler, Tobias ; Helbig, Christoph ; Rathgeber, Andreas ; Sonnemann, Guido ; Thorenz, Andrea ; Tuma, Axel:
Design of an endpoint indicator for mineral resource supply risks in life cycle sustainability assessment : The case of Li‐ion batteries.
In: Journal of Industrial Ecology. Vol. 25 (2021) Issue 4 . - pp. 1051-1062.
DOI: https://doi.org/10.1111/jiec.13094

Esser, Tilman U. ; Troßmann, Vanessa T. ; Lentz, Sarah ; Engel, Felix B. ; Scheibel, Thomas:
Designing of spider silk proteins for human induced pluripotent stem cell-based cardiac tissue engineering.
In: Materials Today Bio. Vol. 11 (2021) . - No. 100114.
DOI: https://doi.org/10.1016/j.mtbio.2021.100114

Schreiner, Florian ; Thorenz, Benjamin ; Schmidt, Julian ; Friedrich, Markus ; Döpper, Frank:
Development of a Measuring and Control Unit for an Intelligent Adjustment of Process Parameters in Sawing.
In: MM Science Journal. (2021) Issue 5 . - pp. 5203-5210.
DOI: https://doi.org/10.17973/MMSJ.2021_11_2021166

Volltext
Groneberg, Hajo ; Koller, Jan ; Mahr, Alexander ; Döpper, Frank:
Development of a systematic approach to identify non-value-adding operations in the LBM process chain.
In: Procedia CIRP. Vol. 104 (2021) . - pp. 1613-1618.
DOI: https://doi.org/10.1016/j.procir.2021.11.272

Diaz, Ivonne L. ; Jérôme, Valérie ; Freitag, Ruth ; Perez, León D.:
Development of poly(ethyleneimine) grafted amphiphilic copolymers : Evaluation of their cytotoxicity and ability to complex DNA.
In: Journal of Bioactive and Compatible Polymers. Vol. 36 (2021) Issue 6 . - pp. 447-463.
DOI: https://doi.org/10.1177/08839115211053925

Hofmaier, Mirjam ; Urban, Birgit ; Lentz, Sarah ; Borkner, Christian B. ; Scheibel, Thomas ; Fery, Andreas ; Müller, Martin:
Dichroic Fourier Transform Infrared Spectroscopy Characterizationof the β‑Sheet Orientation in Spider Silk Films on Silicon Substrates.
In: The Journal of Physical Chemistry B. Vol. 125 (2021) Issue 4 . - pp. 1061-1071.
DOI: https://doi.org/10.1021/acs.jpcb.0c09395

Volltext
Linz, Mario ; Exner, Jörg ; Kita, Jaroslaw ; Bühner, Florian ; Seipenbusch, Martin ; Moos, Ralf:
Discontinuous Powder Aerosol Deposition : An Approach to Prepare Films Using Smallest Powder Quantities.
In: Coatings. Vol. 11 (2021) Issue 7 . - No. 844.
DOI: https://doi.org/10.3390/coatings11070844

Volltext
Koedel, Justus ; Seibt, Sebastian ; Callsen, Christoph ; Puchtler, Florian ; Weise, Markus ; Weidinger, Andy ; Altstädt, Volker ; Ruckdäschel, Holger ; Schobert, Rainer ; Biersack, Bernhard:
DNA as a Natural Flame Retardant for Cellulose Acetate Polymer Mixtures.
In: ChemistrySelect. Vol. 6 (2021) Issue 15 . - pp. 3605-3609.
DOI: https://doi.org/10.1002/slct.202004493

Kandlbinder-Paret, Christoph ; Fischerauer, Alice ; Fischerauer, Gerhard:
Dynamic water fill level measurement using a phantom-dependent adaptive electrical capacitance tomography (ECT) method.
In: Technisches Messen. Vol. 88 (2021) Issue 9 . - pp. 519-530.
DOI: https://doi.org/10.1515/teme-2021-0006

Zöllner, Christian ; Haralampous, Onoufrios ; Brüggemann, Dieter:
Effect of engine operating conditions on soot layer permeability and density in diesel particulate filters.
In: International Journal of Engine Research. Vol. 22 (2021) Issue 1 . - pp. 50-63.
DOI: https://doi.org/10.1177/1468087419847794

Volltext
Müller, Claudia ; Trujillo-Miranda, Mairon ; Maier, Michael ; Heath, Daniel E. ; O'Connor, Andrea J. ; Salehi, Sahar:
Effects of External Stimulators on Engineered Skeletal Muscle Tissue Maturation.
In: Advanced Materials Interfaces. Vol. 8 (2021) Issue 1 . - No. 2001167. - 35 S.
DOI: https://doi.org/10.15495/EPub_UBT_00005286

Volltext

Volltext
Leupold, Nico ; Seibel, Anna Lena ; Moos, Ralf ; Panzer, Fabian:
Electrical Conductivity of Halide Perovskites Follows Expectations from Classical Defect Chemistry.
In: European Journal of Inorganic Chemistry. (2021) Issue 28 . - pp. 2882-2889.
DOI: https://doi.org/10.1002/ejic.202100381

Böttcher, Tim ; Stojkovikj, Sasho ; Khadke, Prashant ; Kunz, Ulrike ; Mayer, Matthew T. ; Roth, Christina ; Ensinger, Wolfgang ; Muench, Falk:
Electrodeposition of palladium-dotted nickel nanowire networks as a robust self-supported methanol electrooxidation catalyst.
In: Journal of Materials Science. Vol. 56 (2021) . - pp. 12620-12633.
DOI: https://doi.org/10.1007/s10853-021-06088-6

Kandlbinder-Paret, Christoph ; Fischerauer, Alice ; Fischerauer, Gerhard:
Elektrische Kapazitätstomografie mit phantomabhängiger Adaptivität.
In: Technisches Messen. Vol. 88 (2021) Issue 1 . - pp. 24-32.
DOI: https://doi.org/10.1515/teme-2019-0132

Riegraf, Matthias ; Bombarda, Ilaria ; Dömling, Ferdinand ; Liensdorf, Tom ; Sitzmann, Carolin ; Langhof, Nico ; Schafföner, Stefan ; Han, Feng ; Sata, Noriko ; Geipel, Christian ; Walter, Christian ; Costa, Rémi:
Enhancing the Mechanical Strength of Electrolyte-Supported Solid Oxide Cells with Thin and Dense Doped-Ceria Interlayers.
In: ACS Applied Materials & Interfaces. Vol. 13 (2021) Issue 42 . - pp. 49879-49889.
DOI: https://doi.org/10.1021/acsami.1c13899

Volltext
Hüter, Florian ; Rieg, Frank:
Extending Marlow's general first-invariant constitutive model to compressible, isotropic hyperelastic materials.
In: Engineering Computations. Vol. 38 (2021) Issue 6 . - pp. 2631-2647.
DOI: https://doi.org/10.1108/EC-05-2020-0251

Volltext
Simon, Christopher ; Zander, Judith ; Kottakkat, Tintula ; Weiss, Morten ; Timm, Jana ; Roth, Christina ; Marschall, Roland:
Fast Microwave Synthesis of Phase-Pure Ni₂FeS₄ Thiospinel Nanosheets for Application in Electrochemical CO₂ Reduction.
In: ACS Applied Energy Materials. Vol. 4 (2021) Issue 9 . - pp. 8702-8708.
DOI: https://doi.org/10.1021/acsaem.1c01341

Kemnitzer, Jan ; Tarasova, Anna ; Pezold, Daniel:
Fertigung funktional gradierter Bauteile im High Speed Sintering.
In: Maschinenbau : die Deutschland-Ausgabe des Schweizer Industriemagazins. Vol. 1 (2021) Issue 4 . - pp. 8-11.
DOI: https://doi.org/10.1007/s44029-021-0066-4

Kull, Tobias ; Zeilmann, Bernd ; Fischerauer, Gerhard:
Field-ready implementation of linear economic model predictive control for microgrid dispatch in small and medium enterprises.
In: Energies. Vol. 14 (2021) Issue 13 . - No. 3921.
DOI: https://doi.org/10.3390/en14133921

Mattar, Nour ; Langlois, Valérie ; Renard, Estelle ; Rademacker, Tim ; Hübner, Fabian ; Demleitner, Martin ; Altstädt, Volker ; Ruckdäschel, Holger ; Rios de Anda, Agustin:
Fully Bio-Based Epoxy-Amine Thermosets Reinforced with Recycled Carbon Fibers as a Low Carbon-Footprint Composite Alternative.
In: ACS Applied Polymer Materials. Vol. 3 (2021) Issue 1 . - pp. 426-435.
DOI: https://doi.org/10.1021/acsapm.0c01187

Jännsch, Yannick ; Hämmerle, Martin ; Leung, Jane J. ; Simon, Elfriede ; Fleischer, Maximilian ; Moos, Ralf:
Gas evolution in electrochemical flow cell reactors induces resistance gradients with consequences for the positioning of the reference electrode.
In: RSC Advances. Vol. 11 (2021) Issue 45 . - pp. 28189-28197.
DOI: https://doi.org/10.1039/D1RA05345K

Volltext
Keim, Daniel ; Gollner, Katrin ; Gollner, Ulrich ; Jérôme, Valérie ; Freitag, Ruth:
Generation of Recombinant Primary Human B Lymphocytes Using Non-Viral Vectors.
In: International Journal of Molecular Sciences. Vol. 22 (2021) Issue 15 . - No. 8239.
DOI: https://doi.org/10.3390/ijms22158239

Taheriniya, Shabnam ; Davani, Farnaz A. ; Hilke, Sven ; Hepp, Marco ; Gadelmeier, Christian ; Chellali, Mohammed Reda ; Boll, Torben ; Rösner, Harald ; Peterlechner, Martin ; Gammer, Christoph ; Divinski, Sergiy V. ; Butz, Benjamin ; Glatzel, Uwe ; Hahn, Horst ; Wilde, Gerhard:
High entropy alloy nanocomposites produced by high pressure torsion.
In: Acta Materialia. Vol. 208 (2021) . - No. 116714.
DOI: https://doi.org/10.1016/j.actamat.2021.116714

Maleki, Mahboubeh ; Tichter, Tim ; El-Nagar, Gumaa A. ; Lauermann, Iver ; Roth, Christina:
Hybrid Electrospun Nanofibers as Electrocatalyst for Vanadium Redox Flow Batteries : Theory and Experiment.
In: ChemElectroChem. Vol. 8 (2021) Issue 1 . - pp. 218-226.
DOI: https://doi.org/10.1002/celc.202001380

Menzel, Teresa ; Weigert, Sebastian ; Gagsteiger, Andreas ; Eich, Yannik ; Sittl, Sebastian ; Papastavrou, Georg ; Ruckdäschel, Holger ; Altstädt, Volker ; Höcker, Birte:
Impact of Enzymatic Degradation on the Material Properties of Poly(Ethylene Terephthalate).
In: Polymers. Vol. 13 (2021) Issue 22 . - No. 3885.
DOI: https://doi.org/10.3390/polym13223885

Lange, Christopher ; Barthelmäs, Patrick ; Rosnitschek, Tobias ; Tremmel, Stephan ; Rieg, Frank:
Impact of HPC and Automated CFD Simulation Processes on Virtual Product Development : A Case Study.
In: Applied Sciences. Vol. 11 (2021) Issue 14 . - No. 6552.
DOI: https://doi.org/10.3390/app11146552

Volltext
Lenz Leite, Mateus ; Viard, Antoine ; Galusek, Dušan ; Motz, Günter:
In Situ Generated β-Yb₂Si₂O₇ Containing Coatings for Steel Protection in Extreme Combustion Environments.
In: Advanced Materials Interfaces. Vol. 8 (2021) Issue 13 . - No. 2100384.
DOI: https://doi.org/10.15495/EPub_UBT_00005778

Volltext
Riedl, Simon ; Völkl, Matthias ; Holzinger, Anja ; Jasinski, Julia ; Jérôme, Valérie ; Scheibel, Thomas ; Feldhaar, Heike ; Freitag, Ruth:
In vitro cultivation of primary intestinal cells from Eisenia fetida as basis for ecotoxicological studies.
In: Ecotoxicology. Vol. 31 (2021) . - pp. 221-233.
DOI: https://doi.org/10.1007/s10646-021-02495-2

Firlus, Konstantin ; Völkl, Rainer ; Gabel, Johannes ; Glatzel, Uwe:
The Influence of Cr, Al, Co, Fe and C on Negative Creep of Waspaloy.
In: International Journal of Materials Research. Vol. 112 (2021) Issue 2 . - pp. 90-97.
DOI: https://doi.org/10.1515/ijmr-2020-7980

Azadi, Fatemeh ; Jafari, Seyed Hassan ; Khonakdar, Hossein Ali ; Arjmand, Mohammad ; Wagenknecht, Udo ; Altstädt, Volker:
Influence of Graphene Oxide on Thermally Induced Shape Memory Behavior of PLA/TPU Blends : Correlation with Morphology, Creep Behavior, Crystallinity, and Dynamic Mechanical Properties.
In: Macromolecular Materials and Engineering. Vol. 306 (2021) Issue 2 . - No. 2000576.
DOI: doi:https://doi.org/10.1002/mame.202000576

Volltext
Mosbacher, Mike ; Holzinger, Markus ; Galetz, Mathias ; Glatzel, Uwe:
The Influence of Oxide Color on the Surface Characteristics of Zirconium Alloy ZrNb₇ (wt%) After Different Heat Treatments.
In: Oxidation of Metals. Vol. 95 (2021) Issue 5 . - pp. 377-388.
DOI: https://doi.org/10.15495/EPub_UBT_00005880

Glamsch, Johannes ; Rosnitschek, Tobias ; Rieg, Frank:
Initial Population Influence on Hypervolume Convergence of NSGA-III.
In: International Journal of Simulation Modelling. Vol. 20 (2021) Issue 1 . - pp. 123-133.
DOI: https://doi.org/10.2507/IJSIMM20-1-549

Kuhnigk, Justus ; Raps, Daniel ; Standau, Tobias ; Luik, Marius ; Altstädt, Volker ; Ruckdäschel, Holger:
Insights into the Bead Fusion Mechanism of Expanded Polybutylene Terephthalate (E-PBT).
In: Polymers. Vol. 13 (2021) Issue 4 . - No. 582.
DOI: https://doi.org/10.3390/polym13040582

Schutjajew, Konstantin ; Tichter, Tim ; Schneider, Jonathan ; Antonietti, Markus ; Roth, Christina ; Oschatz, Martin:
Insights into the sodiation mechanism of hard carbon-like materials from electrochemical impedance spectroscopy.
In: Physical Chemistry Chemical Physics. Vol. 23 (2021) Issue 19 . - pp. 11488-11500.
DOI: https://doi.org/10.1039/D1CP00610J

Lange, Christopher ; Tremmel, Stephan ; Rieg, Frank:
Integration von High-Performance-Computing in die simulationsunterstütze Produktentwicklung.
In: Konstruktion. Vol. 73 (2021) Issue 6 . - pp. 69-74.
DOI: https://doi.org/10.37544/0720-5953-2021-06-69

Volltext
Saric, Merisa ; Eisoldt, Lukas ; Döring, Volker ; Scheibel, Thomas:
Interplay of Different Major Ampullate Spidroins during Assembly and Implications for Fiber Mechanics.
In: Advanced Materials. Vol. 33 (2021) Issue 9 . - No. 2006499.
DOI: https://doi.org/10.1002/adma.202006499

Dreier, Julia ; Brütting, Christian ; Ruckdäschel, Holger ; Altstädt, Volker ; Bonten, Christian:
Investigation of the Thermal and Hydrolytic Degradation of Polylactide during Autoclave Foaming.
In: Polymers. Vol. 13 (2021) Issue 16 . - No. 2624.
DOI: https://doi.org/10.3390/polym13162624

Helm, Moritz ; Riedl, Simon ; Gollner, K. ; Gollner, U. ; Jérôme, Valérie ; Freitag, Ruth:
Isolation of primary human B lymphocytes from tonsils compared to blood as alternative source for ex vivo application.
In: Journal of Chromatography B. Vol. 1179 (2021) . - No. 122853.
DOI: https://doi.org/10.1016/j.jchromb.2021.122853

Volltext
Zehner, Bastian ; Korth, Wolfgang ; Schmidt, Fabian ; Cokoja, Mirza ; Jess, Andreas:
Kinetics of Epoxidation of Cyclooctene with Ionic Liquids Containing Tungstate as Micellar Catalyst.
In: Chemical Engineering & Technology. Vol. 44 (2021) Issue 12 . - pp. 2374-2381.
DOI: https://doi.org/10.1002/ceat.202100102

Klose, Bastian ; Kremer, Daniel ; Aksit, Merve ; van der Zwan, Kasper P. ; Kreger, Klaus ; Senker, Jürgen ; Altstädt, Volker ; Schmidt, Hans-Werner:
Kinked Bisamides as Efficient Supramolecular Foam Cell Nucleating Agents for Low-Density Polystyrene Foams with Homogeneous Microcellular Morphology.
In: Polymers. Vol. 13 (2021) Issue 7 . - No. 1094.
DOI: https://doi.org/10.3390/polym13071094

Jüttner, Michael ; Tremmel, Stephan ; Correns, Martin ; Koch, Oliver ; Wartzack, Sandro:
Ein Kommentar zum mehrachsigen Spannungszustand im reibungsfrei überrollten Kontakt elastischer Körper und zur Anwendung von Vergleichsspannungshypothesen.
In: Tribologie und Schmierungstechnik. Vol. 68 (2021) Issue 2 . - pp. 7-13.
DOI: https://doi.org/10.24053/TuS-2021-0009

Charpentier Poncelet, Alexandre ; Helbig, Christoph ; Loubet, Philippe ; Beylot, Antoine ; Muller, Stéphanie ; Villeneuve, Jacques ; Laratte, Bertrand ; Thorenz, Andrea ; Tuma, Axel ; Sonnemann, Guido:
Life cycle impact assessment methods for estimating the impacts of dissipative flows of metals.
In: Journal of Industrial Ecology. Vol. 25 (2021) Issue 5 . - pp. 1177-1193.
DOI: https://doi.org/10.1111/JIEC.13136

Kogut, Iurii ; Wollbrink, Alexander ; Steiner, Carsten ; Wulfmeier, Hendrik ; El Azzouzi, Fatima-Ezzahrae ; Moos, Ralf ; Fritze, Holger:
Linking the Electrical Conductivity and Non-Stoichiometry of Thin Film Ce1−xZrxO2−δ by a Resonant Nanobalance Approach.
In: Materials. Vol. 14 (2021) . - No. 748.
DOI: https://doi.org/10.3390/ma14040748

Volltext
Exner, Jörg ; Linz, Mario ; Kita, Jaroslaw ; Moos, Ralf:
Making powder aerosol deposition accessible for small amounts : A novel and modular approach to produce dense ceramic films.
In: International Journal of Applied Ceramic Technology. Vol. 18 (2021) Issue 6 . - pp. 2178-2196.
DOI: https://doi.org/10.1111/ijac.13841

Bakis, Gökhan ; Wendel, Jan-Felix ; Zeiler, Rico ; Aksit, Alper ; Häublein, Markus ; Demleitner, Martin ; Benra, Jan ; Forero, Stefan ; Schütz, Walter ; Altstädt, Volker:
Mechanical Properties of the Carbon Nanotube Modified Epoxy–Carbon Fiber Unidirectional Prepreg Laminates.
In: Polymers. Vol. 13 (2021) Issue 5 . - No. 770.
DOI: https://doi.org/10.3390/polym13050770

Volltext
Sommer, Christoph ; Bargel, Hendrik ; Raßmann, Nadine ; Scheibel, Thomas:
Microbial repellence properties of engineered spider silk coatings prevent biofilm formation of opportunistic bacterial strains.
In: MRS Communications. Vol. 11 (2021) Issue 3 . - pp. 356-362.
DOI: https://doi.org/10.1557/s43579-021-00034-y

Volltext
Grüninger, Helen ; Bokdam, Menno ; Leupold, Nico ; Tinnemans, Paul ; Moos, Ralf ; de Wijs, Gilles A. ; Panzer, Fabian ; Kentgens, Arno P. M.:
Microscopic (Dis)order and Dynamics of Cations in Mixed FA/MA Lead Halide Perovskites.
In: The Journal of Physical Chemistry C. Vol. 125 (2021) Issue 3 . - pp. 1742-1753.
DOI: https://doi.org/10.1021/acs.jpcc.0c10042

Schnucklake, Maike ; Cheng, Ming ; Maleki, Mahboubeh ; Roth, Christina:
A mini-review on decorating, templating of commercial and electrospinning of new porous carbon electrodes for vanadium redox flow batteries.
In: Journal of Physics: Materials. Vol. 4 (2021) Issue 3 . - No. 032007.
DOI: https://doi.org/10.1088/2515-7639/abf1a9

Kull, Tobias ; Zeilmann, Bernd ; Fischerauer, Gerhard:
Modular Model Composition for Rapid Implementations of Embedded Economic Model Predictive Control in Microgrids.
In: Applied Sciences. Vol. 11 (2021) Issue 22 . - No. 10602.
DOI: https://doi.org/10.3390/app112210602

Witt, Daniel ; Wilde, Dion ; Baakes, Florian ; Belkhir, Fethi ; Röder, Fridolin ; Krewer, Ulrike:
Myth and Reality of a Universal Lithium-Ion Battery Electrode Design Optimum : A Perspective and Case Study.
In: Energy Technology. Vol. 9 (2021) Issue 6 . - No. 2000989.
DOI: https://doi.org/10.1002/ente.202000989

Du Ngoc, Uy Lan ; Bethke, Christian ; Altstädt, Volker ; Ruckdäschel, Holger:
New Insights on Expandability of Pre-Cured Epoxy Using a Solid-State CO₂-Foaming Technique.
In: Polymers. Vol. 13 (2021) Issue 15 . - No. 2441.
DOI: https://doi.org/10.3390/polym13152441

Werner, Robin ; Kita, Jaroslaw ; Gollner, Michael ; Linseis, Florian ; Moos, Ralf:
Novel, low-cost device to simultaneously measure the electrical conductivity and the Hall coefficient from room temperature up to 600 °C.
In: Journal of Sensors and Sensor Systems. Vol. 10 (2021) . - pp. 71-81.
DOI: https://doi.org/10.5194/jsss-10-71-2021

Paulisch, Melanie Cornelia ; Gebhard, Marcus ; Franzen, David ; Hilger, André ; Osenberg, Markus ; Marathe, Shashidhara ; Rau, Christoph ; Ellendorff, Barbara ; Turek, Thomas ; Roth, Christina ; Manke, Ingo:
Operando Synchrotron Imaging of Electrolyte Distribution in Silver-Based Gas Diffusion Electrodes During Oxygen Reduction Reaction in Highly Alkaline Media.
In: ACS Applied Energy Materials. Vol. 4 (2021) Issue 8 . - pp. 7497-7503.
DOI: https://doi.org/10.1021/acsaem.1c01524

Rosnitschek, Tobias ; Hentschel, Rick ; Siegel, Tobias ; Kleinschrodt, Claudia ; Zimmermann, Markus ; Alber-Laukant, Bettina ; Rieg, Frank:
Optimized One-Click Development for Topology-Optimized Structures.
In: Applied Sciences. Vol. 11 (2021) Issue 5 . - No. 2400.
DOI: https://doi.org/10.3390/app11052400

Helbig, Christoph ; Bruckler, Martin ; Thorenz, Andrea ; Tuma, Axel:
An Overview of Indicator Choice and Normalization in Raw Material Supply Risk Assessments.
In: Resources. Vol. 10 (2021) Issue 8 . - No. 79.
DOI: https://doi.org/10.3390/resources10080079

Volltext
Humenik, Martin ; Winkler, Anika ; Scheibel, Thomas:
Patterning of protein‐based materials.
In: Biopolymers. Vol. 112 (2021) Issue 2 . - No. e23412.
DOI: https://doi.org/10.1002/bip.23412

Volltext
Nazarenus, Tobias ; Sun, Yanyan ; Exner, Jörg ; Kita, Jaroslaw ; Moos, Ralf:
Powder Aerosol Deposition as a Method to ProduceGarnet-Type Solid Ceramic Electrolytes : A Study on Electrochemical Film Properties and Industrial Applications.
In: Energy Technology. Vol. 9 (2021) Issue 7 . - No. 2100211.
DOI: https://doi.org/10.1002/ente.202100211

Volltext
Leupold, Nico ; Denneler, Stefan ; Rieger, Gotthard ; Moos, Ralf:
Powder Treatment for Increased Thickness of Iron Coatings Produced by the Powder Aerosol Deposition Method and Formation of Iron–Alumina Multilayer Structures.
In: Journal of Thermal Spray Technology. Vol. 30 (2021) . - pp. 480-487.
DOI: https://doi.org/10.1007/s11666-020-01098-3

Strassburg, Stephen ; Zainuddin, Shakir ; Scheibel, Thomas:
The Power of Silk Technology for Energy Applications.
In: Advanced Energy Materials. Vol. 11 (2021) Issue 43 . - No. 2100519.
DOI: https://doi.org/10.1002/aenm.202100519

Schwarz, Sebastian ; Grillenberger, Hannes ; Tremmel, Stephan ; Wartzack, Sandro:
Prediction of Rolling Bearing Cage Dynamics Using Dynamics Simulations and Machine Learning Algorithms.
In: Tribology Transactions. (2021) . - pp. 1-23.
DOI: https://doi.org/10.1080/10402004.2021.1934618

Volltext
Qi, H. Jerry ; Ionov, Leonid ; Zhao, Ruike:
Preface: Forum on Novel Stimuli-Responsive Materials for 3D Printing.
In: ACS Applied Materials & Interfaces. Vol. 13 (2021) Issue 11 . - pp. 12637-12638.
DOI: https://doi.org/10.1021/acsami.1c03782

Kolloch, Martin ; Puchas, Georg ; Grigat, Niels ; Vollbrecht, Ben ; Krenkel, Walter ; Gries, Thomas:
Process Chain Development for the Fabrication of Three-Dimensional Braided Oxide Ceramic Matrix Composites.
In: Materials. Vol. 14 (2021) Issue 21 . - No. 6338.
DOI: https://doi.org/10.3390/ma14216338

Volltext
Kirschen, Marcus ; Hay, Thomas ; Echterhof, Thomas:
Process Improvements for Direct Reduced Iron Melting in the Electric Arc Furnace with Emphasis on Slag Operation.
In: Processes. Vol. 9 (2021) Issue 2 . - pp. 402-412.
DOI: https://doi.org/10.3390/pr9020402

Han, Feng ; Riegraf, Matthias ; Sata, Noriko ; Bombarda, Ilaria ; Liensdorf, Tom ; Sitzmann, Carolin ; Langhof, Nico ; Schafföner, Stefan ; Walter, Christian ; Geipel, Christian ; Costa, Rémi:
Properties and Performance of Electrolyte Supported SOFCs with EB-PVD Gd-Doped Ceria Thin-Films.
In: ECS Transactions. Vol. 103 (2021) Issue 1 . - pp. 139-147.
DOI: https://doi.org/10.1149/10301.0139ecst

Glatzel, Uwe ; Schleifer, Felix ; Gadelmeier, Christian ; Krieg, Fabian ; Müller, Moritz ; Mosbacher, Mike ; Völkl, Rainer:
Quantification of Solid Solution Strengthening and Internal Stresses through Creep Testing of Ni-Containing Single Crystals at 980°C.
In: Metals. Vol. 11 (2021) Issue 7 . - No. 1130.
DOI: https://doi.org/10.3390/met11071130

Lin, Yueh-Yu ; Schleifer, Felix ; Holzinger, Markus ; Ta, Na ; Skrotzki, Birgit ; Kamachali, Reza Darvishi ; Glatzel, Uwe ; Fleck, Michael:
Quantitative Shape-Classification of Misfitting Precipitates during Cubic to Tetragonal Transformations : Phase-Field Simulations and Experiments.
In: Materials. Vol. 14 (2021) Issue 6 . - No. 1373.
DOI: https://doi.org/10.3390/ma14061373

Müllner, Sebastian ; Held, Tilo ; Schmidt-Rodenkirchen, Achim ; Gerdes, Thorsten ; Roth, Christina:
Reactive Spray Drying as a One-Step Synthesis Approach towards Si/rGO Anode Materials for Lithium-Ion Batteries.
In: Journal of the Electrochemical Society. Vol. 168 (2021) Issue 12 . - No. 120545.
DOI: https://doi.org/10.1149/1945-7111/ac429d

Volltext
Leupold, Nico ; Panzer, Fabian:
Recent Advances and Perspectives on Powder-Based Halide Perovskite Film Processing.
In: Advanced Functional Materials. Vol. 31 (2021) Issue 14 . - No. 2007350.
DOI: https://doi.org/10.1002/adfm.202007350

Neubauer, Vanessa J. ; Kellner, Christine ; Grün, Viktoria ; Schenk, Anna ; Scheibel, Thomas:
Recombinant major ampullate spidroin-particles as biotemplates for manganese carbonate mineralization.
In: Multifunctional Materials. Vol. 4 (2021) Issue 1 . - Art.Nr. 014002.
DOI: https://doi.org/10.1088/2399-7532/abddc4

Volltext
Neubauer, Vanessa J. ; Trossmann, Vanessa T. ; Jacobi, Sofia ; Döbl, Annika ; Scheibel, Thomas:
Recombinant Spider Silk Gels Derived from Aqueous–Organic Solvents as Depots for Drugs.
In: Angewandte Chemie International Edition. Vol. 60 (2021) Issue 21 . - pp. 11847-11851.
DOI: https://doi.org/10.15495/EPub_UBT_00005756

Volltext
Meides, Nora ; Menzel, Teresa ; Pötzschner, Björn ; Löder, Martin G. J. ; Mansfeld, Ulrich ; Strohriegl, Peter ; Altstädt, Volker ; Senker, Jürgen:
Reconstructing the Environmental Degradation of Polystyrene by Accelerated Weathering.
In: Environmental Science & Technology. Vol. 55 (2021) Issue 12 . - pp. 7930-7938.
DOI: https://doi.org/10.1021/acs.est.0c07718

Helbig, Christoph ; Schrijvers, Dieuwertje ; Hool, Alessandra:
Selecting and prioritizing material resources by criticality assessments.
In: One Earth. Vol. 4 (2021) Issue 3 . - pp. 339-345.
DOI: https://doi.org/10.1016/j.oneear.2021.02.006

Uribe Gómez, Juan Manuel ; Posada Murcia, Andrés ; Shukla, Amit ; Ergin, Mert ; Constante Ibarra, Gissela Katherine ; Apsite, Indra ; Dulle, Martin ; Schwarzer, Madeleine ; Caspari, Anja ; Synytska, Alla ; Salehi, Sahar ; Ionov, Leonid:
Shape-Morphing Fibrous Hydrogel/Elastomer Bilayers Fabricated by a Combination of 3D Printing and Melt Electrowriting for Muscle Tissue Regeneration.
In: ACS Applied Bio Materials. Vol. 4 (2021) Issue 2 . - pp. 1720-1730.
DOI: https://doi.org/10.1021/acsabm.0c01495

Khadke, Prashant ; Tichter, Tim ; Boettcher, Tim ; Muench, Falk ; Ensinger, Wolfgang ; Roth, Christina:
A simple and effective method for the accurate extraction of kinetic parameters using differential Tafel plots.
In: Scientific Reports. Vol. 11 (2021) Issue 1 . - No. 8974.
DOI: https://doi.org/10.1038/s41598-021-87951-z

Ta, Na ; Umer Bilal, Muhammad ; Häusler, Ines ; Saxena, Alaukik ; Lin, Yueh-Yu ; Schleifer, Felix ; Fleck, Michael ; Glatzel, Uwe ; Skrotzki, Birgit ; Darvishi Kamachali, Reza:
Simulation of the θ’ Precipitation Process with Interfacial Anisotropy Effects in Al-Cu Alloys.
In: Materials. Vol. 14 (2021) Issue 5 . - p. 1280.
DOI: https://doi.org/10.3390/ma14051280

Flauder, Stefan ; Langhof, Nico ; Krenkel, Walter ; Schafföner, Stefan:
Size effect of carbon fiber-reinforced silicon carbide composites (C/C-SiC) : Part 1 – bending load and statistical effects.
In: Journal of the European Ceramic Society. Vol. 41 (2021) Issue 14 . - pp. 6805-6814.
DOI: https://doi.org/10.1016/j.jeurceramsoc.2021.07.040

Uribe Gómez, Juan Manuel ; Posada Murcia, Andrés ; Shukla, Amit ; Alkhamis, Hanin ; Salehi, Sahar ; Ionov, Leonid:
Soft Elastic Fibrous Scaffolds for Muscle Tissue Engineering by Touch Spinning.
In: ACS Applied Bio Materials. Vol. 4 (2021) Issue 7 . - pp. 5585-5597.
DOI: https://doi.org/10.1021/acsabm.1c00403

Klemenz, L. ; Richter, A. ; Langhof, Nico ; Göbbels, M.:
Structure and principles of oxidic hexaphases : A review.
In: Open Ceramics. Vol. 7 (2021) .
DOI: https://doi.org/10.1016/j.oceram.2021.100142

Rietsch, Philipp ; Zeyat, Mohammad ; Hübner, Oskar ; Hoffmann, Katrin ; Kutter, Maximilian ; Paskin, Alice ; Uhlig, Julian ; Lentz, Dieter ; Resch-Genger, Ute ; Eigler, Siegfried:
Substitution Pattern-Controlled Fluorescence Lifetimes of Fluoranthene Dyes.
In: The Journal of Physical Chemistry B. Vol. 125 (2021) Issue 4 . - pp. 1207-1213.
DOI: https://doi.org/10.1021/acs.jpcb.0c08851

Volltext
Ramming, Philipp ; Leupold, Nico ; Schötz, Konstantin ; Köhler, Anna ; Moos, Ralf ; Grüninger, Helen ; Panzer, Fabian:
Suppressed ion migration in powder-based perovskite thick films using an ionic liquid.
In: Journal of Materials Chemistry C. Vol. 9 (2021) Issue 35 . - pp. 11827-11837.
DOI: https://doi.org/10.1039/D1TC01554K

Bethke, Christian ; Kaysser, Simon T. ; Du Ngoc, Uy Lan ; Goller, Sebastian M. ; van der Zwan, Kasper P. ; Senker, Jürgen ; Ruckdäschel, Holger ; Altstädt, Volker:
Synthesis and Characterization of Dual-Functional Carbamates as Blowing and Curing Agents for Epoxy Foam.
In: Industrial & Engineering Chemistry Research. Vol. 60 (2021) Issue 19 . - pp. 7065-7080.
DOI: https://doi.org/10.1021/acs.iecr.0c05262

Schwanzer, Peter ; Schillinger, Maximilian ; Mieslinger, Johann ; Walter, Stefanie ; Hagen, Gunter ; Märkl, Susanne ; Haft, Gerhard ; Dietrich, Markus ; Moos, Ralf ; Gaderer, Matthias ; Rabl, Hans-Peter:
A Synthetic Ash-Loading Method for Gasoline Particulate Filters with Active Oil Injection.
In: SAE International Journal of Engines. Vol. 14 (2021) Issue 4 . - pp. 493-505.
DOI: https://doi.org/10.4271/03-14-04-0029

Herrmann, Elke ; Dingenouts, Nico ; Roth, Christina ; Scheiba, Frieder ; Ehrenberg, Helmut:
Systematic Characterization of Degraded Anion Exchange Membranes Retrieved from Vanadium Redox Flow Battery Field Tests.
In: Membranes. Vol. 11 (2021) Issue 7 . - No. 469.
DOI: https://doi.org/10.3390/membranes11070469

Flauder, Stefan ; Langhof, Nico ; Krenkel, Walter:
Tailored macro-pores during the formation of C/C-SiC via liquid phase pyrolysis.
In: Journal of the European Ceramic Society. Vol. 41 (2021) Issue 5 . - pp. 2995-3001.
DOI: https://doi.org/10.1016/j.jeurceramsoc.2020.10.006

Bethke, Christian ; Goller, Sebastian Manfred ; Du Ngoc, Uy Lan ; Kaysser, Simon Tino ; Altstädt, Volker ; Ruckdäschel, Holger:
Tailoring Epoxy Resin Foams by Pre-Curing with Neat Amine Hardeners and Its Derived Carbamates.
In: Polymers. Vol. 13 (2021) Issue 8 . - No. 1348.
DOI: https://doi.org/10.3390/polym13081348

Andreasen, Jesper Graa ; Baldasso, Enrico ; Kærn, Martin Ryhl ; Weith, Theresa ; Heberle, Florian ; Brüggemann, Dieter ; Haglind, Fredrik:
Techno-economic feasibility analysis of zeotropic mixtures and pure fluids for organic Rankine cycle systems.
In: Applied Thermal Engineering. Vol. 192 (2021) . - No. 116791.
DOI: https://doi.org/10.1016/j.applthermaleng.2021.116791

Marian, Max ; Feile, Klara ; Rothammer, Benedict ; Bartz, Marcel ; Wartzack, Sandro ; Seynstahl, Armin ; Tremmel, Stephan ; Krauß, Sebastian ; Merle, Benoit ; Böhm, Thomas ; Wang, Bo ; Wyatt, Brian C. ; Anasori, Babak ; Rosenkranz, Andreas:
Ti₃C₂Tₓ solid lubricant coatings in rolling bearings with remarkable performance beyond state-of-the-art materials.
In: Applied Materials Today. Vol. 25 (2021) .
DOI: https://doi.org/10.1016/j.apmt.2021.101202

Rosenfeldt, Sabine ; Mickoleit, Frank ; Jörke, Cornelia ; Clement, Joachim H. ; Markert, Simon ; Jérôme, Valérie ; Schwarzinger, Stephan ; Freitag, Ruth ; Schüler, Dirk ; Uebe, René ; Schenk, Anna:
Towards standardized purification of bacterial magnetic nanoparticles for future in vivo applications.
In: Acta Biomaterialia. Vol. 120 (2021) . - pp. 293-303.
DOI: https://doi.org/10.1016/j.actbio.2020.07.042

Nečas, David ; Vrbka, Martin ; Marian, Max ; Rothammer, Benedict ; Tremmel, Stephan ; Wartzack, Sandro ; Galandáková, Adéla ; Gallo, Jiří ; Wimmer, Markus A. ; Křupka, Ivan ; Hartl, Martin:
Towards the understanding of lubrication mechanisms in total knee replacements. Part I. Experimental investigations.
In: Tribology International. Vol. 156 (2021) . - Art.Nr. 106874.
DOI: https://doi.org/10.1016/j.triboint.2021.106874

Marian, Max ; Orgeldinger, Christian ; Rothammer, Benedict ; Nečas, David ; Vrbka, Martin ; Křupka, Ivan ; Hartl, Martin ; Wimmer, Markus A. ; Tremmel, Stephan ; Wartzack, Sandro:
Towards the understanding of lubrication mechanisms in total knee replacements. Part II. Numerical modeling.
In: Tribology International. Vol. 156 (2021) . - Art.Nr. 106809.
DOI: https://doi.org/10.1016/j.triboint.2020.106809

Posada Murcia, Andrés ; Uribe Gómez, Juan Manuel ; Sommer, Jens-Uwe ; Ionov, Leonid:
Two-Way Shape Memory Polymers : Evolution of Stress vs Evolution of Elongation.
In: Macromolecules. Vol. 54 (2021) Issue 12 . - pp. 5838-5847.
DOI: https://doi.org/10.1021/acs.macromol.1c00568

Volltext

Mora-García, Alma G. ; Mosbacher, Mike ; Hastreiter, Julia ; Völkl, Rainer ; Glatzel, Uwe ; Muñoz-Saldaña, Juan:
Creep behavior of polycrystalline and single crystal Ni-based superalloys coated with Ta-containing NiCoCrAlY by high-velocity oxy-fuel spraying.
In: Scripta Materialia. Vol. 178 (17 December 2020) . - pp. 522-526.
DOI: https://doi.org/10.1016/j.scriptamat.2019.12.023

Strassburg, Stephen ; Mayer, Kai ; Scheibel, Thomas:
Functionalization of biopolymer fibers with magnetic nanoparticles.
In: Physical Sciences Reviews. (3 December 2020) .
DOI: https://doi.org/10.1515/psr-2019-0118

König-Haagen, Andreas ; Franquet, Erwin ; Faden, Moritz ; Brüggemann, Dieter:
Influence of the convective energy formulation for melting problems with enthalpy methods.
In: International Journal of Thermal Sciences. Vol. 158 (December 2020) . - No. 106477.
DOI: https://doi.org/10.1016/j.ijthermalsci.2020.106477

Jännsch, Yannick ; Leung, Jane J. ; Hämmerle, Martin ; Magori, Erhard ; Wiesner-Fleischer, Kerstin ; Simon, Elfriede ; Fleischer, Maximilian ; Moos, Ralf:
Pulsed potential electrochemical CO2 reduction for enhanced stability and catalyst reactivation of copper electrodes.
In: Electrochemistry Communications. Vol. 121 (December 2020) . - No. 106861.
DOI: https://doi.org/10.1016/j.elecom.2020.106861

Karabelli, Duygu ; Singh, Soumya ; Kiemel, Steffen ; Koller, Jan ; Konarov, Aishuak ; Stubhan, Frank ; Miehe, Robert ; Weeber, Max ; Bakenov, Zhumabay ; Birke, Kai Peter:
Sodium-Based Batteries : In Search of the Best Compromise Between Sustainability and Maximization of Electric Performance.
In: Frontiers in Energy Research. Vol. 8 (December 2020) . - No. 605129.
DOI: https://doi.org/10.3389/fenrg.2020.605129

Volltext
Opel, Thorsten ; Weise, Daniel:
Verbundkeramische Reibpaarungen auf Basis von maßgeschneiderten 3D-Preformen.
In: CU reports : Internationales Mitgliedermagazin des Composites United. (December 2020) Issue 2 . - p. 36.

Weithmann, Nicolas ; Mlinar, Stanislava ; Sonnleitner, Eva ; Weig, Alfons ; Freitag, Ruth:
Flexible feeding in anaerobic digestion – Impact on process stability, performance and microbial community structures.
In: Anaerobe. (17 November 2020) . - No. 102297.
DOI: https://doi.org/10.1016/j.anaerobe.2020.102297

Volltext
Riese, Cornelius N. ; Uebe, René ; Rosenfeldt, Sabine ; Schenk, Anna ; Jérôme, Valérie ; Freitag, Ruth ; Schüler, Dirk:
An automated oxystat fermentation regime for microoxic cultivation of Magnetospirillum gryphiswaldense.
In: Microbial Cell Factories. Vol. 19 (10 November 2020) . - No. 206.
DOI: https://doi.org/10.1186/s12934-020-01469-z

Müller, Fabian ; Jokisch, Stephan ; Bargel, Hendrik ; Scheibel, Thomas:
Centrifugal Electrospinning Enables the Production of Meshes ofUltrathin Polymer Fibers.
In: ACS Applied Polymer Materials. Vol. 2 (2 November 2020) Issue 11 . - pp. 4360-4667.
DOI: https://doi.org/10.1021/acsapm.0c00853

Fischerauer, Gerhard:
Beiträge der Sensorik zur Energie- und Ressourceneffizienz.
In: Jahresmagazin Mess- und Sensortechnik. Vol. 2020/2021 (November 2020) . - pp. 112-118.

Belli, Renan ; Völkl, Harald ; Csato, Stefan ; Tremmel, Stephan ; Wartzack, Sandro ; Lohbauer, Ulrich:
Development of a hoop-strength test for model sphero-cylindrical dental ceramic crowns : FEA and fractography.
In: Journal of the European Ceramic Society. Vol. 40 (November 2020) Issue 14 . - pp. 4753-4764.
DOI: https://doi.org/10.1016/j.jeurceramsoc.2020.01.064

Marian, Max ; Song, Gui Cheng ; Wang, Bo ; Fuenzalida, Victor M. ; Krauß, Sebastian ; Merle, Benoit ; Tremmel, Stephan ; Wartzack, Sandro ; Yu, Jinhong ; Rosenkranz, Andreas:
Effective usage of 2D MXene nanosheets as solid lubricant – Influence of contact pressure and relative humidity.
In: Applied Surface Science. Vol. 531 (November 2020) . - No. 147311.
DOI: https://doi.org/10.1016/j.apsusc.2020.147311

Hahn, Markus ; Schiela, Anton ; Mößle, Patrick ; Katzer, Felix ; Danzer, Michael A.:
Revealing inhomogeneities in electrode lithiation using a real-time discrete electro-chemical model.
In: Journal of Power Sources. Vol. 477 (November 2020) . - No. 228672.
DOI: https://doi.org/10.1016/j.jpowsour.2020.228672

Volltext
Karabelli, Duygu ; Kiemel, Steffen ; Singh, Soumya ; Koller, Jan ; Ehrenberger, Simone ; Miehe, Robert ; Weeber, Max ; Birke, Kai Peter:
Tackling xEV Battery Chemistry in View of Raw Material Supply Shortfalls.
In: Frontiers in Energy Research. Vol. 8 (November 2020) . - No. 594857.
DOI: https://doi.org/10.3389/fenrg.2020.594857

Gadelmeier, Christian ; Haas, Sebastian ; Lienig, Tim ; Manzoni, Anna M. ; Feuerbacher, Michael ; Glatzel, Uwe:
Temperature Dependent Solid Solution Strengthening in the High Entropy Alloy CrMnFeCoNi in Single Crystalline State.
In: Metals. Vol. 10 (November 2020) Issue 11 . - No. 1412.
DOI: https://doi.org/10.3390/met10111412

Volltext
Haynl, Christian ; Vongsvivut, Jitraporn ; Mayer, Kai R. H. ; Bargel, Hendrik ; Neubauer, Vanessa J. ; Tobin, Mark J. ; Elgar, Mark A. ; Scheibel, Thomas:
Free‑standing spider silk webs of the thomisid Saccodomus formivorus are made of composites comprising micro- and submicron fibers.
In: Scientific Reports. Vol. 10 (19 October 2020) . - No. 17624.
DOI: https://doi.org/10.1038/s41598-020-74469-z

Jérôme, Valérie ; Synatschke, Christopher V. ; Freitag, Ruth:
Transient Destabilization of Biological Membranes Contributes to the Superior Performance of Star-Shaped PDMAEMA in Delivering pDNA.
In: ACS Omega. Vol. 5 (5 October 2020) Issue 41 . - pp. 26640-26654.
DOI: https://doi.org/10.1021/acsomega.0c03367

Volltext
Rieg, Frank ; Tremmel, Stephan ; Hüter, Florian:
Automatisierte FEA von Sandwichbauteilen.
In: News / Wissenschaftliche Gesellschaft für Produktentwicklung. (October 2020) Issue 2 . - p. 3.

Schönauer-Kamin, Daniela ; Marr, Isabella ; Zehentbauer, Melanie ; Zängle, Clara ; Moos, Ralf:
Characterization of the sensitive material for a resistive NOx gas dosimeter by DRIFT spectroscopy.
In: Sensors and Actuators B: Chemical. Vol. 320 (October 2020) . - No. 128568.
DOI: https://doi.org/10.1016/j.snb.2020.128568

Volltext
Oezdamar, Oguzhan ; Weigel, Robert ; Hagelauer, Amelie ; Solomko, Valentyn:
Considerations for Harmonics Distribution in Aperture-Tuned Inverted-F Antenna for Cellular Handheld Devices.
In: IEEE Transactions on Microwave Theory and Techniques. Vol. 68 (October 2020) Issue 10 . - pp. 4122-4130.
DOI: https://doi.org/10.1109/TMTT.2020.2996195

Koedel, Justus ; Callsen, Christoph ; Weise, Markus ; Puchtler, Florian ; Weidinger, Andy ; Altstädt, Volker ; Schobert, Rainer ; Biersack, Bernhard:
Investigation of melamine and DOPO-derived flame retardants for the bioplastic cellulose acetate : (Material Behaviour).
In: Polymer Testing. Vol. 90 (October 2020) . - No. 106702.
DOI: https://doi.org/10.1016/j.polymertesting.2020.106702

Volltext
Jess, Andreas:
Energieträger Wasserstoff.
In: Spektrum. Vol. 16 (September 2020) Issue 1 . - pp. 6-15.

Peter, Ronny ; Fischerauer, Gerhard:
In-situ measurement of permittivity distributions in reactors by cavity perturbation.
In: Measurement Science and Technology. Vol. 31 (September 2020) Issue 9 . - No. 094019.
DOI: https://doi.org/10.1088/1361-6501/ab6add

Volltext
Bay, Christian:
Mehr Interdisziplinarität wagen.
x-technik IT & Medien GmbH
In: Additive Fertigung. (September 2020) Issue 3 . - pp. 68-69.

Peter, Ronny ; Fischerauer, Gerhard:
Monte-Carlo-Methode zur Verringerung von Messfehlern bei der Materialparameterbestimmung mit Hohlraumresonatoren.
In: Technisches Messen. Vol. 87 (September 2020) Issue S1 . - S97-S101.
DOI: https://doi.org/10.1515/teme-2020-0027

Marian, Max ; Tremmel, Stephan ; Wartzack, Sandro ; Song, Guichen ; Wang, Bo ; Yu, Jinhong ; Rosenkranz, Andreas:
Mxene nanosheets as an emerging solid lubricant for machine Elements - Towards increased energy efficiency and service life.
In: Applied Surface Science. Vol. 523 (September 2020) . - No. 146503.
DOI: https://doi.org/10.1016/j.apsusc.2020.146503

Mahr, Alexander ; Bay, Christian:
Nachbearbeitung beim additiven Fertigungsverfahren Laserstrahlschmelzen : Herausforderungen und Optimierungspotential.
In: Werkstoffe in der Fertigung. (September 2020) Issue 05 . - pp. 29-31.

Volltext
Rosnitschek, Tobias ; Glamsch, Johannes ; Alber-Laukant, Bettina ; Rieg, Frank:
Das Optimum im Leichtbau finden.
In: Konstruktionspraxis. (September 2020) . - pp. 14-16.

Mandl, Magdalena ; Becherer, Julian ; Kramer, Dominik ; Mönig, Reiner ; Diemant, Thomas ; Behm, R. Jürgen ; Hahn, Markus ; Böse, Olaf ; Danzer, Michael A.:
Sodium metal anodes : Deposition and dissolution behaviour and SEI Formation.
In: Electrochimica Acta. Vol. 354 (September 2020) . - No.136698.
DOI: https://doi.org/10.1016/j.electacta.2020.136698

Volltext
Hopfe, Charlotte ; Ospina-Jara, Bryan ; Scheibel, Thomas ; Cabra-Garcia, Jimmy:
Ocrepeira klamt sp. n. (Araneae: Araneidae), a novel spider species from an Andean páramo in Colombia.
In: PLoS One. Vol. 15 (24 August 2020) Issue 8 . - No. e0237499.
DOI: https://doi.org/10.1371/journal.pone.0237499

Neubauer, Vanessa ; Scheibel, Thomas:
Spider Silk Fusion Proteins for Controlled Collagen Binding and Biomineralization.
In: ACS Biomaterials Science & Engineering. Vol. 6 (18 August 2020) Issue 10 . - pp. 5599-5608.
DOI: https://doi.org/10.1021/acsbiomaterials.0c00818

Zaiser, E. ; Zhou, X. Y. ; Manzoni, Anna M. ; Haas, Sebastian ; Glatzel, Uwe ; Zhang, X. P. ; Thompson, G. B. ; Li, W. ; Vogel, F.:
Hierarchical phase separation behavior in a Ni-Si-Fe alloy.
In: Acta Materialia. Vol. 195 (15 August 2020) . - pp. 327-340.
DOI: https://doi.org/10.1016/j.actamat.2020.05.023

Volltext
Hofmann, Andreas ; Schorzmann, Johann:
Plattenspieler : Besserer Klang dank 3D-Druck.
In: additive : Das Magazin für generative Fertigung. (4 August 2020) .

Mühlbauer, Markus ; Bohlen, Oliver ; Danzer, Michael A.:
Analysis of power flow control strategies in heterogeneous battery energy storage systems.
In: Journal of Energy Storage. Vol. 30 (August 2020) . - No. 101415.
DOI: https://doi.org/10.1016/j.est.2020.101415

Lefevre, Mathilde ; Flammang, Patrick ; Aranko, A.Sesilja ; Linder, Markus B. ; Scheibel, Thomas ; Humenik, Martin ; Leclercq, Maxime ; Surin, Mathieu ; Tafforeau, Lionel ; Wattiez, Ruddy ; Leclèrc, Philippe ; Hennebert, Elise:
Sea star-inspired recombinant adhesive proteins self-assemble and adsorb on surfaces in aqueous environments to form cytocompatible coatings.
In: Acta Biomaterialia. Vol. 112 (August 2020) . - pp. 62-74.
DOI: https://doi.org/10.1016/j.actbio.2020.05.036

Wirsching, Sven ; Schwarz, Sebastian ; Tremmel, Stephan:
Use of analytically describable geometries to calculate the contact between rolling element face and rib in bearing simulations.
In: Tribologie und Schmierungstechnik. Vol. 67 (August 2020) Issue 3 . - pp. 25-33.
DOI: https://doi.org/10.30419/TuS-2020-0015

Manzoni, Anna M. ; Haas, Sebastian ; Kropf, Holger ; Duarte Correa, Jazmin Maria ; Cakir, Cafer Tufan ; Dubois, Felix ; Töbens, Daniel Maria ; Glatzel, Uwe:
Temperature evolution of lattice misfit in Hf and Mo variations of the Al₁₀Co₂₅Cr₈Fe₁₅Ni₃₆Ti₆ compositionally complex alloy.
In: Scripta Materialia. Vol. 188 (9 July 2020) . - pp. 74-79.
DOI: https://doi.org/10.1016/j.scriptamat.2020.07.013

Müller, Verena ; Bernhard, Rebecca ; Wegener, Jennifer ; Pfeiffer, Jürgen ; Rössler, Stefan ; Scurtu, Rares-George ; Memm, Michaela ; Danzer, Michael A. ; Wohlfahrt-Mehrens, Margret:
Evaluation of Scalable Porous Si‐Rich Si/C Composites with Low Volume Expansion in Coin Cells to Prismatic Cell Formats.
In: Energy Technology. Vol. 8 (July 2020) Issue 7 . - No. 2000217.
DOI: https://doi.org/10.1002/ente.202000217

Horcher, Alexander ; Tangermann-Gerk, Katja ; Barroso, Gilvan S. ; Schmidt, Michael ; Motz, Günter:
Laser and furnace pyrolyzed organosilazane-based glass/ZrO₂ composite coating system : A comparison.
In: Journal of the European Ceramic Society. Vol. 40 (July 2020) Issue 7 . - pp. 2642-2651.
DOI: https://doi.org/10.1016/j.jeurceramsoc.2019.10.040

Lin, Yueh-Yu ; Schleifer, Felix ; Fleck, Michael ; Glatzel, Uwe:
On the interaction between γ′′ precipitates and dislocation microstructures in Nb containing single crystal nickel-base alloys.
In: Materials Characterization. Vol. 165 (July 2020) . - No. 110389.
DOI: https://doi.org/10.1016/j.matchar.2020.110389

Volltext
Chen, Dehua ; Daoud, Haneen ; Scherm, Florian ; Klötzer, Bernd ; Hauck, Christoph ; Glatzel, Uwe:
Stainless Steel Powder Produced by a Novel Arc Spray Process.
In: Journal of Materials Research and Technology. Vol. 9 (July 2020) Issue 4 . - pp. 8314-8322.
DOI: https://doi.org/10.1016/j.jmrt.2020.05.076

Huang, Tao ; Kumari, Sushma ; Herold, Heike ; Bargel, Hendrik ; Aigner, Tamara B. ; Heath, Daniel E. ; O'Brian-Simpson, Neil M. ; O'Connor, Andrea J. ; Scheibel, Thomas:
Enhanced Antibacterial Activity of Se Nanoparticles Upon Coating with Recombinant Spider Silk Protein eADF4(κ16).
In: International Journal of Nanomedicine. Vol. 15 (17 June 2020) . - pp. 4275-4288.
DOI: https://doi.org/10.2147/IJN.S255833

Volltext
Ackermann, Thomas ; Potschka, Julian ; Maiwald, Tim ; Hagelauer, Amelie ; Fischer, Georg ; Weigel, Robert:
A Robust Digital Predistortion Algorithm for 5G MIMO : Modeling a MIMO Scenario With Two Nonlinear MIMO Transmitters Including a Cross-Coupling Effect.
In: IEEE Microwave Magazine. Vol. 21 (June 2020) Issue 7 . - pp. 54-62.
DOI: https://doi.org/10.1109/MMM.2020.2985195

Volltext
Kügler, Patricia ; Marian, Max ; Schleich, Benjamin ; Tremmel, Stephan ; Wartzack, Sandro:
tribAIn - Towards an Explicit Specification of Shared Tribological Understanding.
In: Applied Sciences. Vol. 10 (June 2020) Issue 13 . - No. 4421.
DOI: https://doi.org/10.3390/app10134421

Bay, Christian ; Döpper, Frank:
Innovativ aus der Krise : Interdisziplinäres Zentrum für 3D-Druck.
In: K-Zeitung : Die Zeitung der Kunststoff- und Kautschukundustrie. (22 May 2020) Issue 10 .

Volltext
Winkler, Andreas ; Marian, Max ; Tremmel, Stephan ; Wartzack, Sandro:
Numerical Modeling of Wear in a Thrust Roller Bearing under Mixed Elastohydrodynamic Lubrication.
In: Lubricants. Vol. 8 (22 May 2020) Issue 5 . - No. 58.
DOI: https://doi.org/10.3390/lubricants8050058

Bifano, Luca ; Fischerauer, Alice ; Fischerauer, Gerhard ; Liedtke, Alfred:
Ansätze für eine Prozessüberwachung bei der Sandregeneration.
In: GIESSEREI. Vol. 107 (May 2020) Issue 5/6 . - pp. 22-29.

Volltext
Bifano, Luca ; Fischerauer, Alice ; Fischerauer, Gerhard:
Investigation of complex permittivity spectra of foundry sands.
In: Technisches Messen. Vol. 87 (May 2020) Issue 5 . - pp. 372-380.
DOI: https://doi.org/10.1515/teme-2019-0121

Rosnitschek, Tobias ; Alber-Laukant, Bettina ; Rieg, Frank:
Optimierung der Materialausnutzung bei Additiver Fertigung und Topologieoptimierung.
In: Werkstoffe in der Fertigung. (May 2020) Issue 3 . - pp. 20-21.

Aschenbrenner, Alexander ; Schleich, Benjamin ; Tremmel, Stephan ; Wartzack, Sandro:
A variational simulation framework for the analysis of load distribution and radial displacement of cylindrical roller bearings.
In: Mechanism and Machine Theory. Vol. 147 (May 2020) . - No. 103769.
DOI: https://doi.org/10.1016/j.mechmachtheory.2019.103769

Volltext
Thorenz, Benjamin ; Oßwald, Friedrich ; Schötz, Sebastian ; Westermann, Hans-Henrik ; Döpper, Frank:
Applying and Producing Indexable End Mills : A Comparative Market Study in Context of Resource Efficiency.
In: Procedia Manufacturing. Vol. 43 (30 April 2020) . - pp. 167-174. - 8.
DOI: https://doi.org/10.15495/EPub_UBT_00004842

Volltext
Rieg, Frank ; Rosnitschek, Tobias:
Optimierung im Produktentwicklungsprozess : Optimale Produktentwicklung mit der kostenlosen Software für Topologieoptimierung Z88Arion® V3, entwickelt vom Lehrstuhl für Konstruktionslehre und CAD der Universität Bayreuth.
In: Newsletter Wissenschaftliche Gesellschaft für Produktentwicklung, WiGeP. Vol. 2020 (1 April 2020) Issue 1 . - pp. 18-19.

Ulrich, Anke S. ; Pfizenmaier, Petra ; Solimani, Ali ; Glatzel, Uwe ; Galetz, Mathias C.:
Improving the oxidation resistance of Cr-Si-based alloys by ternary alloying.
In: Corrosion Science. Vol. 165 (April 2020) . - No. 108376.
DOI: https://doi.org/10.1016/j.corsci.2019.108376

Volltext
Meiser, Matthias:
Den Klang verstehen : Simulationsgestützte Schall-Resonanz-Analyse komplexer Geometrien.
Composites United e.V. (CU)
In: CU reports : Internationales Mitgliedermagazin des Composites United. Vol. 1 (April 2020) . - pp. 44-45.

Volltext
Rosemann, Bernd:
Klimagas CO2 als wertvoller Rohstoff.
In: Werkstoffe in der Fertigung. (April 2020) Issue 2 . - pp. 14-16.

Volltext
Mösch, Mario ; Fischerauer, Gerhard ; Hoffmann, Daniel:
A self-adaptive and self-sufficient energy harvesting system.
In: Sensors. Vol. 20 (April 2020) Issue 9 . - No. 2519.
DOI: https://doi.org/10.3390/s20092519

Hausherr, Jan-Marcel ; Wagner, Lukas ; Gorywoda, Marek:
Fabrication of artificial defects and their effect on the mechanical properties of C/C-SiC.
Fraunhofer ISC, Center for High Temperature Materials and Design HTL
In: Journal of the European Ceramic Society. Vol. 40 (March 2020) Issue 3 . - pp. 636-641.
DOI: https://doi.org/10.1016/j.jeurceramsoc.2019.10.012

Humenik, Martin ; Preiß, Tamara ; Gödrich, Sebastian ; Papastavrou, Georg ; Scheibel, Thomas:
Functionalized DNA-spider silk nanohydrogels for controlled protein binding and release.
In: Materials Today Bio. Vol. 6 (March 2020) . - No. 100045.
DOI: https://doi.org/10.1016/j.mtbio.2020.100045

Benders, Stefan ; Gomes, Bruna Ferreira ; Carmo, Marcelo ; Colnago, Luiz Alberto ; Blümich, Bernhard:
In-situ MRI velocimetry of the magnetohydrodynamic effect in electrochemical cells.
In: Journal of Magnetic Resonance. Vol. 312 (March 2020) . - No. 106692.
DOI: https://doi.org/10.1016/j.jmr.2020.106692

Shahnooshi, Mahboobeh ; Javadi, Azizeh ; Nazockdast, Hossein ; Altstädt, Volker:
Development of in situ nanofibrillar poly (lactic acid)/poly (butylene terephthalate) composites : Non-isothermal crystallization and crystal morphology.
In: European Polymer Journal. Vol. 125 (15 February 2020) . - No. 109489.
DOI: https://doi.org/10.1016/j.eurpolymj.2020.109489

König-Haagen, Andreas ; Höhlein, Stephan ; Brüggemann, Dieter:
Detailed exergetic analysis of a packed bed thermal energy storage unit in combination with an Organic Rankine Cycle.
In: Applied Thermal Engineering. Vol. 165 (25 January 2020) . - No. 114583.
DOI: https://doi.org/10.1016/j.applthermaleng.2019.114583

Oyekale, Joseph Oyetola ; Heberle, Florian ; Petrollese, Mario ; Brüggemann, Dieter ; Cau, Giorgio:
Thermo-economic evaluation of actively selected siloxane mixtures in a hybrid solar-biomass organic Rankine cycle power plant.
In: Applied Thermal Engineering. Vol. 165 (25 January 2020) . - No. 114607.
DOI: https://doi.org/10.1016/j.applthermaleng.2019.114607

DeSimone, Elise ; Aigner, Tamara B. ; Humenik, Martin ; Lang, Gregor ; Scheibel, Thomas:
Aqueous electrospinning of recombinant spider silk proteins.
In: Materials Science and Engineering C. Vol. 106 (January 2020) . - No. 110145.
DOI: https://doi.org/10.1016/j.msec.2019.110145

Jugenheimer, Andreas ; Rosemann, Bernd ; Döpper, Frank ; Hellmich, Caroline:
Refabrikation : die ultimative Kreislaufwirtschaft.
In: HZwei : Das Magazin für Wasserstoff und Brennstoffzellen. Vol. 20 (January 2020) Issue 01 . - pp. 40-42.

Weikert, Tim ; Tremmel, Stephan ; Stangier, Dominic ; Tillmann, Wolfgang ; Krebs, Eugen ; Biermann, Dirk:
Tribological studies on multi-coated forming tools.
In: Journal of Manufacturing Processes. Vol. 49 (January 2020) . - pp. 141-152.
DOI: https://doi.org/10.1016/j.jmapro.2019.11.021

Bruns, Nico ; Scheibel, Thomas:
Virtual Special Issue Biomimetic Polymers.
In: European Polymer Journal. Vol. 122 (January 2020) . - No. 109370.
DOI: https://doi.org/10.1016/j.eurpolymj.2019.109370

Apsite, Indra ; Constante Ibarra, Gissela Katherine ; Dulle, Martin ; Vogt, Lena ; Caspari, Anja ; Boccaccini, Aldo R. ; Synytska, Alla ; Salehi, Sahar ; Ionov, Leonid:
4D biofabrication of fibrous artificial nerve graft for neuron regeneration.
In: Biofabrication. Vol. 12 (2020) Issue 3 . - No. 035027.
DOI: https://doi.org/10.1088/1758-5090/ab94cf

Apsite, Indra ; Uribe Gómez, Juan Manuel ; Posada Murcia, Andrés ; Rosenfeldt, Sabine ; Salehi, Sahar ; Ionov, Leonid:
4D biofabrication of skeletal muscle microtissues.
In: Biofabrication. Vol. 12 (2020) Issue 1 . - No. 015016.
DOI: https://doi.org/10.1088/1758-5090/ab4cc4

Volltext
Lange, Christopher ; Roppel, Matthias ; Rosnitschek, Tobias ; Rieg, Frank:
Am Supercomputer simuliert : Engineering mit Rechenkraft beschleunigen.
In: IT & Production. Vol. 21 (2020) Issue 3 . - pp. 65-67.

Kiani, Fatemeh ; Entezam, Mehdi ; Khonakdar, Hossein Ali ; Jafari, Seyed Hassan ; Callsen, Christoph ; Altstädt, Volker:
Assessment of compatibilization role of nanoclay in immiscible polystyrene/ethylene–octene copolymer blends via wide‐angle X‐ray scattering, microstructure, rheological analyses, and mechanical properties.
In: Journal of Applied Polymer Science. Vol. 137 (2020) Issue 22 . - No. 48748.
DOI: https://doi.org/10.1002/app.48748

Bay, Christian ; Döpper, Frank:
Auf dem Weg zur industriellen Reife : Von der Idee über die Kleinserie bis zur AM-Serienfertigung.
In: Maschinenbau : das Schweizer Industrie-Magazin. Vol. 49 (2020) Issue 7 .

Molenda, Paul ; Mezger, Tizian ; Oechsle, Oliver ; Koller, Jan ; Döpper, Frank:
Backlog-Sequencing : A Comparison between Workload Control and ConWIP using a simulation approach.
In: Procedia CIRP. Vol. 93 (2020) . - pp. 664-669.
DOI: https://doi.org/10.1016/j.procir.2020.04.097

Volltext
Mickoleit, Frank ; Jérôme, Valérie ; Freitag, Ruth ; Schüler, Dirk:
Bacterial Magnetosomes as Novel Platform for the Presentation of Immunostimulatory, Membrane-Bound Ligands in Cellular Biotechnology.
In: Advanced Biosystems. Vol. 4 (2020) Issue 3 . - No. 1900231.
DOI: https://doi.org/10.1002/adbi.201900231

Volltext
König-Haagen, Andreas ; Mühlbauer, Adam ; Marquardt, Tom ; Caron-Soupart, Adèle ; Fourmigué, Jean-François ; Brüggemann, Dieter:
Basic Analysis of Uncertainty Sources in the CFD Simulation of a Shell-and-Tube Latent Thermal Energy Storage Unit.
In: Applied Sciences. Vol. 10 (2020) Issue 19 . - No. 6723.
DOI: https://doi.org/10.3390/app10196723

Volltext
Fink, Michael F. ; Eckhardt, Julia ; Khadke, Prashant ; Gerdes, Thorsten ; Roth, Christina:
Bifunctional α‐MnO₂ and Co₃O₄ Catalyst for Oxygen Electrocatalysis in Alkaline Solution.
In: ChemElectroChem. Vol. 7 (2020) Issue 23 . - pp. 4822-4836.
DOI: https://doi.org/10.15495/EPub_UBT_00005277

Volltext
Weingart, Nick ; Raps, Daniel ; Lu, Mingfu ; Endner, Lukas ; Altstädt, Volker:
Comparison of the Foamability of Linear and Long-Chain Branched Polypropylene : The Legend of Strain-Hardening as a Requirement for Good Foamability.
In: Polymers. Vol. 12 (2020) Issue 3 . - No. 725.
DOI: https://doi.org/10.3390/polym12030725

Volltext
Morsi, Rania ; Jamali, Vahid ; Hagelauer, Amelie ; Ng, Derrick Wing Kwan ; Schober, Robert:
Conditional Capacity and Transmit Signal Design for SWIPT Systems With Multiple Nonlinear Energy Harvesting Receivers.
In: IEEE Transactions on Communications. Vol. 68 (2020) Issue 1 . - pp. 582-601.
DOI: https://doi.org/10.1109/TCOMM.2019.2951109

Volltext
Murugesan, Selvakumar ; Scheibel, Thomas:
Copolymer/Clay Nanocomposites for Biomedical Applications.
In: Advanced Functional Materials. Vol. 30 (2020) Issue 17 . - No. 1908101.
DOI: https://doi.org/10.15495/EPub_UBT_00005077

Koller, Jan ; Velte, Christoph J. ; Schötz, Sebastian ; Döpper, Frank:
Customizing Products through Remanufacturing : Ideation of a Concept.
In: Procedia Manufacturing. Vol. 43 (2020) . - pp. 598-605.
DOI: https://doi.org/10.1016/j.promfg.2020.02.151

Volltext
Ruchets, Anastasiya ; Donker, Nils ; Zosel, Jens ; Schönauer-Kamin, Daniela ; Moos, Ralf ; Guth, Ulrich ; Mertig, Michael:
Cyclic and square-wave voltammetry for selective simultaneous NO and O2 gas detection by means of solid electrolyte sensors.
In: Journal of Sensors and Sensor Systems. Vol. 9 (2020) Issue 2 . - pp. 355-362.
DOI: https://doi.org/10.5194/jsss-9-355-2020

Kumari, Sushma ; Lang, Gregor ; DeSimone, Elise ; Spengler, Christian ; Troßmann, Vanessa T. ; Lücker, Susanne ; Hudel, Martina ; Jacobs, Karin ; Krämer, Norbert ; Scheibel, Thomas:
Data for microbe resistant engineered recombinant spider silk protein based 2D and 3D materials.
In: Data in Brief. Vol. 32 (2020) . - No. 106305.
DOI: https://doi.org/10.1016/j.dib.2020.106305

Kandlbinder-Paret, Christoph ; Häring, Johannes ; Fischerauer, Alice ; Fischerauer, Gerhard:
De-Embedding-Ansatz zur Messung nichtidealer Kapazitäten mit kommerziellen Kapazitätssensoren.
In: Technisches Messen. Vol. 87 (2020) Issue S1 . - S. S74-S78.
DOI: https://doi.org/10.1515/teme-2020-0016

Schneider, Jonathan ; Tichter, Tim ; Khadke, Prashant ; Zeis, Roswitha ; Roth, Christina:
Deconvolution of electrochemical impedance data for the monitoring of electrode degradation in VRFB.
In: Electrochimica Acta. Vol. 336 (2020) . - No. 135510.
DOI: https://doi.org/10.1016/j.electacta.2019.135510

Volltext
Exner, Jörg ; Nazarenus, Tobias ; Kita, Jaroslaw ; Moos, Ralf:
Dense Y-doped ion conducting perovskite films of BaZrO3, BaSnO3, and BaCeO3 for SOFC applications produced by powder aerosol deposition at room temperature.
In: International Journal of Hydrogen Energy. Vol. 45 (2020) Issue 16 . - pp. 10000-10016.
DOI: https://doi.org/10.1016/j.ijhydene.2020.01.164

Alexopoulos, Charalampos ; Aljolani, Osama Atef Ishaq ; Heberle, Florian ; Roumpedakis, Tryfon C. ; Brüggemann, Dieter ; Karellas, Sotirios:
Design Evaluation for a Finned-Tube CO2 Gas Cooler in Residential Applications.
In: Energies. Vol. 13 (2020) Issue 10 . - No. 2428.
DOI: https://doi.org/10.3390/en13102428

Zahn, Aljoscha ; Diwisch, Pascal ; Rieg, Frank ; Alber-Laukant, Bettina:
Design modification of an innovative split-single two-stroke engine.
In: Proceedings of the Design Society: DESIGN Conference. Vol. 1 (2020) . - pp. 2581-2588.
DOI: https://doi.org/10.1017/dsd.2020.102

Volltext
Ciocoveanu, Radu ; Weigel, Robert ; Hagelauer, Amelie ; Issakov, Vadim:
Design of a 60 GHz 32% PAE Class-AB PA with 2nd Harmonic Control in 45-nm PD-SOI CMOS.
In: IEEE Transactions on Circuits and Systems I : Regular Papers. Vol. 67 (2020) Issue 8 . - pp. 2635-2646.
DOI: https://doi.org/10.1109/TCSI.2020.2984042

Herold, Heike M. ; Döbl, Annika ; Wohlrab, Stefanie ; Humenik, Martin ; Scheibel, Thomas:
Designed Spider Silk-Based Drug Carrier for Redox- or pH-Triggered Drug Release.
In: Biomacromolecules. Vol. 21 (2020) Issue 12 . - pp. 4904-4912.
DOI: https://doi.org/10.1021/acs.biomac.0c01138

Volltext
Steiner, Carsten ; Walter, Stefanie ; Malashchuk, Vladimir ; Hagen, Gunter ; Kogut, Iurii ; Fritze, Holger ; Moos, Ralf:
Determination of the Dielectric Properties of Storage Materials for Exhaust Gas Aftertreatment Using the Microwave Cavity Perturbation Method.
In: Sensors. Vol. 20 (2020) Issue 21 . - No. 6024.
DOI: https://doi.org/10.3390/s20216024

Volltext
Hader, Michael ; Savcigil, Deniz Pinar ; Rosin, Andreas ; Ponfick, Philipp ; Gekle, Stephan ; Wadepohl, Martin ; Bekeschus, Sander ; Fietkau, Rainer ; Frey, Benjamin ; Schlücker, Eberhard ; Gaipl, Udo S.:
Differences of the Immune Phenotype of Breast Cancer Cells after Ex Vivo Hyperthermia by Warm-Water or Microwave Radiation in a Closed-Loop System Alone or in Combination with Radiotherapy.
In: Cancers. Vol. 12 (2020) Issue 5 . - No. 1082.
DOI: https://doi.org/10.3390/cancers12051082

Volltext
Roppel, Matthias ; Hüter, Florian ; Lange, Christopher ; Rosnitschek, Tobias ; Rieg, Frank:
Effizienzsteigerung in der Produktentwicklung am Beispiel von Sandwichstrukturen.
In: Jahresmagazin Werkstofftechnik : Ingenieurwissenschaften. (2020) . - pp. 20-25.

Kleinschrodt, Claudia ; Rieg, Frank:
Einfluss der Modellierung auf die Austauschqualität von CAD-Modellen.
In: Konstruktion. Vol. 72 (2020) Issue 7-8 .

Volltext
Akstaller, Wolfgang ; Weigel, Robert ; Hagelauer, Amelie:
Electrothermal Modeling of Surface Acoustic Wave Resonators and Filters.
In: IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control. Vol. 67 (2020) Issue 11 . - pp. 2423-2432.
DOI: https://doi.org/10.1109/TUFFC.2020.2999545

Kumari, Sushma ; Lang, Gregor ; DeSimone, Elise ; Spengler, Christian ; Troßmann, Vanessa ; Lücker, Susanne ; Hudel, Martina ; Jacobs, Karin ; Krämer, Norbert ; Scheibel, Thomas:
Engineered spider silk-based 2D and 3D materials prevent microbial infestation.
In: Materials Today. Vol. 41 (2020) . - pp. 21-33.
DOI: https://doi.org/10.1016/j.mattod.2020.06.009

Volltext
Akbari Kordlar, Mehri ; Heberle, Florian ; Brüggemann, Dieter:
Evaluation and optimization of the annual performance of a novel tri-generation system driven by geothermal brine in off-design conditions.
In: Applied Sciences. Vol. 10 (2020) Issue 18 . - No. 6532.
DOI: https://doi.org/10.3390/app10186532

Volltext
Standau, Tobias ; Long, Huan ; Murillo Castellón, Svenja ; Brütting, Christian ; Bonten, Christian ; Altstädt, Volker:
Evaluation of the Zero Shear Viscosity, the D-Content and Processing Conditions as Foam Relevant Parameters for Autoclave Foaming of Standard Polylactide (PLA).
In: Materials. Vol. 13 (2020) Issue 6 . - No. 1371.
DOI: https://doi.org/10.3390/ma13061371

Hillenbrand, Thomas ; Brüggemann, Dieter:
Evaporation of free falling droplets of binary alkane-ethanol blends.
In: Fuel. Vol. 274 (2020) . - Art.Nr. 117869.
DOI: https://doi.org/10.1016/j.fuel.2020.117869

Volltext
Oyekale, Joseph Oyetola ; Petrollese, Mario ; Heberle, Florian ; Brüggemann, Dieter ; Cau, Giorgio:
Exergetic and integrated exergoeconomic assessments of a hybrid solar-biomass organic Rankine cycle cogeneration plant.
In: Energy Conversion and Management. Vol. 215 (2020) . - No. 112905.
DOI: https://doi.org/10.1016/j.enconman.2020.112905

Weingart, Nick ; Raps, Daniel ; Kuhnigk, Justus ; Klein, Andreas ; Altstädt, Volker:
Expanded Polycarbonate (EPC) : A New Generation of High-Temperature Engineering Bead Foams.
In: Polymers. Vol. 12 (2020) Issue 10 . - No. 2314.
DOI: https://doi.org/10.3390/polym12102314

Rathgeber, Christoph ; Hiebler, Stefan ; Bayón, Rocío ; Cabeza, Luisa F. ; Zsembinszki, Gabriel ; Englmair, Gerald ; Dannemand, Mark ; Diarce, Gonzalo ; Fellmann, Oliver ; Ravotti, Rebecca ; Groulx, Dominic ; Kheirabadi, Ali C. ; Gschwander, Stefan ; Höhlein, Stephan ; König-Haagen, Andreas ; Beaupere, Noé ; Zalewski, Laurent:
Experimental Devices to Investigate the Long-Term Stability of Phase Change Materials under Application Conditions.
In: Applied Sciences. Vol. 10 (2020) Issue 22 . - No. 7968.
DOI: https://doi.org/10.3390/app10227968

Welzl, Matthias ; Heberle, Florian ; Brüggemann, Dieter:
Experimental evaluation of nucleate pool boiling heat transfer correlations for R245fa and R1233zd(E) in ORC applications.
In: Renewable Energy. Vol. 147 (2020) Issue 3 . - pp. 2855-2864.
DOI: https://doi.org/10.1016/j.renene.2018.09.093

Volltext
Kuboth, Sebastian ; Weith, Theresa ; Heberle, Florian ; Welzl, Matthias ; Brüggemann, Dieter:
Experimental Long-Term Investigation of Model Predictive Heat Pump Control in Residential Buildings with Photovoltaic Power Generation.
In: Energies. Vol. 13 (2020) Issue 22 . - No. 6016.
DOI: https://doi.org/10.3390/en13226016

Bertleff, Benjamin ; Haider, Muhammad Salman ; Claußnitzer, Johannes ; Korth, Wolfgang ; Wasserscheid, Peter ; Jess, Andreas ; Albert, Jakob:
Extractive Catalytic Oxidative Denitrogenation of Fuels and Their Promoting Effect for Desulfurization Catalyzed by Vanadium Substituted Heteropolyacids and Molecular Oxygen.
In: Energy & Fuels. Vol. 34 (2020) Issue 7 . - pp. 8099-8109.
DOI: https://doi.org/10.1021/acs.energyfuels.0c00864

Maleki, Mahboubeh ; El-Nagar, Gumaa A. ; Bernsmeier, Denis ; Schneider, Jonathan ; Roth, Christina:
Fabrication of an efficient vanadium redox flow battery electrode using a free-standing carbon-loaded electrospun nanofibrous composite.
In: Scientific Reports. Vol. 10 (2020) Issue 1 . - No. 11153.
DOI: https://doi.org/10.1038/s41598-020-67906-6

Abouserie, Ahed ; El-Nagar, Gumaa A. ; Heyne, Benjamin ; Günter, Christina ; Schilde, Uwe ; Mayer, Matthew T. ; Stojkovikj, Sasho ; Roth, Christina ; Taubert, Andreas:
Facile Synthesis of Hierarchical CuS and CuCo₂S₄ Structures from an Ionic Liquid Precursor for Electrocatalysis Applications.
In: ACS Applied Materials & Interfaces. Vol. 12 (2020) Issue 47 . - pp. 52560-52570.
DOI: https://doi.org/10.1021/acsami.0c13927

Volltext
Lehmann, Sebastian ; Fischer, Maike ; Rosin, Andreas ; Gerdes, Thorsten ; Krenkel, Walter:
The feasibility of CO₂‐laser‐induced breakdown spectroscopy for fast lead determination in glass cullet.
In: International Journal of Applied Glass Science. Vol. 11 (2020) Issue 2 . - pp. 369-379.
DOI: https://doi.org/10.1111/ijag.14653

Volltext
Rosnitschek, Tobias ; Hüter, Florian ; Alber-Laukant, Bettina:
FEM-Based Modelling of Elastic Properties and Anisotropic Sinter Shrinkage of Metal EAM.
In: International Journal of Simulation Modelling. Vol. 19 (2020) Issue 2 . - pp. 197-208.
DOI: https://doi.org/10.2507/IJSIMM19-2-509

Tichter, Tim ; Schneider, Jonathan ; Roth, Christina:
Finite Heterogeneous Rate Constants for the Electrochemical Oxidation of VO²⁺ at Glassy Carbon Electrodes.
In: Frontiers in Energy Research. Vol. 8 (2020) . - No. 155.
DOI: https://doi.org/10.3389/fenrg.2020.00155

Volltext
Bethke, Christian ; Weber, Lais ; Goedderz, Daniela ; Standau, Tobias ; Döring, Manfred ; Altstädt, Volker:
Fire behavior of flame retarded sandwich structures containing PET foam cores and epoxy face sheets.
In: Polymer Composites. Vol. 41 (2020) Issue 12 . - pp. 5195-5208.
DOI: https://doi.org/10.1002/pc.25786

Volltext
Duerksen, Alexander ; Thiessen, Johannes ; Kern, Christoph ; Jess, Andreas:
Fischer–Tropsch synthesis with periodical draining of a liquid-filled catalyst by hydrogenolysis.
In: Sustainable Energy & Fuels. Vol. 4 (2020) . - pp. 2055-2064.
DOI: https://doi.org/10.1039/C9SE01269A

Goedderz, Daniela ; Weber, Lais ; Markert, Daniel ; Schießer, Alexander ; Fasel, Claudia ; Riedel, Ralf ; Altstädt, Volker ; Bethke, Christian ; Fuhr, Olaf ; Puchtler, Florian ; Breu, Josef ; Döring, Manfred:
Flame retardant polyester by combination of organophosphorus compounds and an NOR radical forming agent.
In: Journal of Applied Polymer Science. Vol. 137 (2020) Issue 1 . - No. 47876.
DOI: https://doi.org/10.1002/app.47876

Reuter, Jens ; Standau, Tobias ; Altstädt, Volker ; Döring, Manfred:
Flame-retardant hybrid materials based on expandable polystyrene beads.
In: Journal of Fire Sciences. Vol. 38 (2020) Issue 3 . - pp. 270-283.
DOI: https://doi.org/10.1177/0734904119899851

Volltext
Roppel, Matthias ; Lange, Christopher ; Alber-Laukant, Bettina ; Tremmel, Stephan ; Rieg, Frank:
Further developments of the simulation tool Z88ENSI for the independent assessment of the thermal and mechanical dimensioning of transport and storage casks.
Eidgenössisches Nuklearsicherheitsinspektorat ENSI
In: ENSI Erfahrungs- und Forschungsbericht. (2020) . - pp. 259-265.

Volltext

Schadeck, Ulrich ; Gerdes, Thorsten ; Krenkel, Walter ; Moos, Ralf:
A Glass Platelet Coating on Battery Electrodes and Its Use as a Separator for Lithium-Ion Batteries.
In: Journal of Electrochemical Energy Conversion and Storage. Vol. 17 (2020) Issue 3 . - No. 034502.
DOI: https://doi.org/10.1115/1.4045783

Watari, Takuma ; Nansai, Keisuke ; Giurco, Damien ; Nakajima, Kenichi ; McLellan, Benjamin ; Helbig, Christoph:
Global Metal Use Targets in Line with Climate Goals.
In: Environmental Science & Technology. Vol. 54 (2020) Issue 19 . - pp. 12476-12483.
DOI: https://doi.org/10.1021/acs.est.0c02471

Bläubaum, Lars ; Röder, Fridolin ; Nowak, Christine ; Chan, Hoon Seng ; Kwade, Arno ; Krewer, Ulrike:
Impact of Particle Size Distribution on Performance of Lithium‐Ion Batteries.
In: ChemElectroChem. Vol. 7 (2020) Issue 23 . - pp. 4755-4766.
DOI: https://doi.org/10.1002/celc.202001249

Volltext
Witt, Christina ; Schmid, Andreas ; Leupold, Nico ; Schultz, Maximilian ; Höcker, Julian ; Baumann, Andreas ; Moos, Ralf ; Panzer, Fabian:
Impact of Pressure and Temperature on the Compaction Dynamics and Layer Properties of Powder-Pressed Methylammonium Lead Halide Thick Films.
In: ACS Applied Electronic Materials. Vol. 2 (2020) Issue 8 . - pp. 2619-2628.
DOI: https://doi.org/10.1021/acsaelm.0c00493

Volltext
Gebhard, Marcus ; Tichter, Tim ; Franzen, David ; Paulisch, Melanie C. ; Schutjajew, Konstantin ; Turek, Thomas ; Manke, Ingo ; Roth, Christina:
Improvement of Oxygen-Depolarized Cathodes in Highly Alkaline Media by Electrospinning of Poly(vinylidene fluoride) Barrier Layers.
In: ChemElectroChem. Vol. 7 (2020) Issue 3 . - pp. 830-837.
DOI: https://doi.org/10.1002/celc.201902115

Volltext
Bethke, Christian ; Goedderz, Daniela ; Weber, Lais ; Standau, Tobias ; Döring, Manfred ; Altstädt, Volker:
Improving the flame-retardant property of bottle-grade PET foam made by reactive foam extrusion.
In: Journal of Applied Polymer Science. Vol. 137 (2020) Issue 35 . - No. 49042.
DOI: https://doi.org/10.1002/app.49042

Volltext
Wagner, Ricarda ; Schönauer-Kamin, Daniela ; Moos, Ralf:
Influence of Humidity and Different Gases on a Resistive Room Temperature NO₂ Gas Dosimeter Based on Al-Doped ZnO for ppb-Concentration Detection.
In: Journal of the Electrochemical Society. Vol. 167 (2020) Issue 16 . - Art.Nr. 167516.
DOI: https://doi.org/10.1149/1945-7111/abcb65

Mlinar, Stanislava ; Weig, Alfons R. ; Freitag, Ruth:
Influence of mixing and sludge volume on stability, reproducibility, and productivity of laboratory-scale anaerobic digestion.
In: Bioresource Technology Reports. Vol. 11 (2020) . - No. 100444.
DOI: https://doi.org/10.1016/j.biteb.2020.100444

Streibl, Maximilian ; Werner, Siegfried ; Kaschta, Joachim ; Schubert, Dirk W. ; Moos, Ralf:
The Influence of Nanoparticles and their Functionalization on the Dielectric Properties of Biaxially Oriented Polypropylene for Power Capacitors.
In: IEEE Transactions on Dielectrics and Electrical Insulation. Vol. 27 (2020) Issue 2 . - pp. 468-475.
DOI: https://doi.org/10.1109/TDEI.2019.008521

Keilholz, Clemens ; Raps, Daniel ; Köppl, Thomas ; Altstädt, Volker:
Influence of nucleating agent type on the morphology of extruded polyetherimide foam for printed circuit boards.
In: Journal of Cellular Plastics. Vol. 56 (2020) Issue 3 . - pp. 317-341.
DOI: https://doi.org/10.1177/0021955X19864107

Hutschreuther, Julia ; Kunz, Raphael ; Breu, Josef ; Altstädt, Volker:
Influence of Particle Size on Toughening Mechanisms of Layered Silicates in CFRP.
In: Materials. Vol. 13 (2020) Issue 10 . - No. 2396.
DOI: https://doi.org/10.3390/ma13102396

Volltext
Bresch, Sophie ; Mieller, Björn ; Schönauer-Kamin, Daniela ; Moos, Ralf ; Reimann, Timmy ; Giovannelli, Fabien ; Rabe, Torsten:
Influence of pressure and dwell time on pressure-assisted sintering of calcium cobaltite.
In: Journal of the American Ceramic Society. Vol. 104 (2020) Issue 2 . - pp. 917-927.
DOI: https://doi.org/10.1111/jace.17541

Volltext
Donker, Nils ; Ruchets, Anastasiya ; Schönauer-Kamin, Daniela ; Zosel, Jens ; Guth, Ulrich ; Moos, Ralf:
Influence of Pt paste and the firing temperature of screen-printed electrodes on the NO detection by pulsed polarization.
In: Journal of Sensors and Sensor Systems. Vol. 9 (2020) Issue 2 . - pp. 293-300.
DOI: https://doi.org/10.5194/jsss-9-293-2020

Schröder, Dominik ; Thiessen, Johannes ; Jess, Andreas ; Scholz, Judith:
Influence of the formation of short-chain olefins by manganese/cobalt-catalyzed Fischer–Tropsch synthesis on the selectivity and effective reaction rate.
In: Catalysis Science & Technology. Vol. 10 (2020) Issue 2 . - pp. 475-483.
DOI: https://doi.org/10.1039/C9CY02022E

Hahn, Markus ; Rosenbach, Dominic ; Krimalowski, Alexander ; Nazarenus, Tobias ; Moos, Ralf ; Thelakkat, Mukundan ; Danzer, Michael A.:
Investigating solid polymer and ceramic electrolytes for lithium-ion batteries by means of an extended Distribution of Relaxation Times analysis.
In: Electrochimica Acta. Vol. 344 (2020) . - No. 136060.
DOI: https://doi.org/10.1016/j.electacta.2020.136060

Geschwindner, Christopher ; Goedderz, Daniela ; Li, Tao ; Köser, Jan ; Fasel, Claudia ; Riedel, Ralf ; Altstädt, Volker ; Bethke, Christian ; Puchtler, Florian ; Breu, Josef ; Döring, Manfred ; Dreizler, Andreas ; Böhm, Benjamin:
Investigation of flame retarded polypropylene by high-speed planar laser-induced fluorescence of OH radicals combined with a thermal decomposition analysis.
In: Experiments in Fluids. Vol. 61 (2020) . - No. 30.
DOI: https://doi.org/10.1007/s00348-019-2864-5

Volltext
Schmidt, Fabian ; Zehner, Bastian ; Korth, Wolfgang ; Jess, Andreas ; Cokoja, Mirza:
Ionic liquid surfactants as multitasking micellar catalysts for epoxidations in water.
In: Catalysis Science & Technology. Vol. 10 (2020) Issue 13 . - pp. 4448-4457.
DOI: https://doi.org/10.1039/D0CY00673D

Claußnitzer, Johannes ; Bertleff, Benjamin ; Korth, Wolfgang ; Albert, Jakob ; Wasserscheid, Peter ; Jess, Andreas:
Kinetics of Triphase Extractive Oxidative Desulfurization of Benzothiophene with Molecular Oxygen Catalyzed by HPA-5.
In: Chemical Engineering & Technology. Vol. 43 (2020) Issue 3 . - pp. 465-475.
DOI: https://doi.org/10.1002/ceat.201900448

Volltext
Nazarenus, Tobias ; Kita, Jaroslaw ; Moos, Ralf ; Exner, Jörg:
Laser-Annealing of Thermoelectric CuFe₀.₉₈Sn₀.₀₂O₂ Films Produced by Powder Aerosol Deposition Method.
In: Advanced Materials Interfaces. Vol. 7 (2020) Issue 22 . - No. 2001114.
DOI: https://doi.org/10.1002/admi.202001114

Habel, Christoph ; Tsurko, Evgeny S. ; Timmins, Renee L. ; Hutschreuther, Julia ; Kunz, Raphael ; Schuchardt, Dominik D. ; Rosenfeldt, Sabine ; Altstädt, Volker ; Breu, Josef:
Lightweight Ultra-High Barrier Liners for Helium and Hydrogen.
In: ACS Nano. Vol. 14 (2020) Issue 6 . - pp. 7018-7024.
DOI: https://doi.org/10.1021/acsnano.0c01633

Volltext
Aksit, Merve ; Gröschel, Sebastian ; Kuhn, Ute ; Aksit, Alper ; Kreger, Klaus ; Schmidt, Hans-Werner ; Altstädt, Volker:
Low-Density Polybutylene Terephthalate Foams with Enhanced Compressive Strength via a Reactive-Extrusion Process.
In: Polymers. Vol. 12 (2020) Issue 9 . - No. 2021.
DOI: https://doi.org/10.3390/polym12092021

Drews, Tom ; Molenda, Paul ; Oechsle, Oliver ; Koller, Jan:
Manufacturing System Optimization with Lean Methods, Manufacturing Process Objectives and Fuzzy Logic Controller Design.
In: Procedia CIRP. Vol. 93 (2020) . - pp. 658-663.
DOI: https://doi.org/10.1016/j.procir.2020.04.145

Sitzmann, Carolin ; Liensdorf, Tom ; Dömling, Ferdinand ; Langhof, Nico ; Krenkel, Walter:
Mechanische Charakterisierung von Festoxid-Brennstoffzellen.
In: Keramische Zeitschrift. Vol. 72 (2020) Issue 2 . - pp. 48-53.
DOI: https://doi.org/10.1007/s42410-020-0122-3

Mörl, Stefan ; Knorr, Daniel ; Streinz, Maximilian ; Mörl, Michaela ; Altstädt, Volker:
Melt impregnation of woven glass fabric reinforced composites in situ modified with short glass fibers in the interlaminar free spacing : Morphology, microstructure and static mechanical properties.
In: Polymer Composites. Vol. 41 (2020) Issue 10 . - pp. 4117-4129.
DOI: https://doi.org/10.1002/pc.25698

Volltext
Apsite, Indra ; Biswas, Arpan ; Li, Yuqi ; Ionov, Leonid:
Microfabrication Using Shape-Transforming Soft Materials.
In: Advanced Functional Materials. Vol. 30 (2020) Issue 26 . - No. 1908028.
DOI: https://doi.org/10.1002/adfm.201908028

Sonderegger, Thomas ; Berger, Markus ; Alvarenga, Rodrigo ; Bach, Vanessa ; Cimprich, Alexander ; Dewulf, Jo ; Frischknecht, Rolf ; Guinée, Jeroen ; Helbig, Christoph ; Huppertz, Tom ; Jolliet, Olivier ; Motoshita, Masaharu ; Northey, Stephen ; Rugani, Benedetto ; Schrijvers, Dieuwertje ; Schulze, Rita ; Sonnemann, Guido ; Valero, Alicia ; Weidema, Bo P. ; Young, Steven B.:
Mineral resources in life cycle impact assessment: part I - a critical review of existing methods.
In: The International Journal of Life Cycle Assessment. Vol. 25 (2020) Issue 4 . - pp. 784-797.
DOI: https://doi.org/10.1007/S11367-020-01736-6

Berger, Markus ; Sonderegger, Thomas ; Alvarenga, Rodrigo ; Bach, Vanessa ; Cimprich, Alexander ; Dewulf, Jo ; Frischknecht, Rolf ; Guinée, Jeroen ; Helbig, Christoph ; Huppertz, Tom ; Jolliet, Olivier ; Motoshita, Masaharu ; Northey, Stephen ; Peña, Claudia A. ; Rugani, Benedetto ; Sahnoune, Abdelhadi ; Schrijvers, Dieuwertje ; Schulze, Rita ; Sonnemann, Guido ; Valero, Alicia ; Weidema, Bo P. ; Young, Steven B.:
Mineral resources in life cycle impact assessment: part II – recommendations on application-dependent use of existing methods and on future method development needs.
In: The International Journal of Life Cycle Assessment. Vol. 25 (2020) Issue 4 . - pp. 798-813.
DOI: https://doi.org/10.1007/S11367-020-01737-5

Schmidt, Oke ; Thomitzek, Matthias ; Röder, Fridolin ; Thiede, Sebastian ; Herrmann, Christoph ; Krewer, Ulrike:
Modeling the Impact of Manufacturing Uncertainties on Lithium-Ion Batteries.
In: Journal of the Electrochemical Society. Vol. 167 (2020) Issue 6 . - No. 060501.
DOI: https://doi.org/10.1149/1945-7111/ab798a

Laue, Vincent ; Wolff, Nicolas ; Röder, Fridolin ; Krewer, Ulrike:
Modeling the Influence of Mixing Strategies on Microstructural Properties of All‐Solid‐State Electrodes.
In: Energy Technology. Vol. 8 (2020) Issue 2 . - No. 1801049.
DOI: https://doi.org/10.1002/ente.201801049

Volltext
Walter, Stefanie ; Schwanzer, Peter ; Hagen, Gunter ; Haft, Gerhard ; Rabl, Hans-Peter ; Dietrich, Markus ; Moos, Ralf:
Modelling the Influence of Different Soot Types on the Radio-Frequency-Based Load Detection of Gasoline Particulate Filters.
In: Sensors. Vol. 20 (2020) Issue 9 . - No. 2659.
DOI: https://doi.org/10.3390/s20092659

Laue, Vincent ; Schmidt, Oke ; Dreger, Henning ; Xie, Xiangzhong ; Röder, Fridolin ; Schenkendorf, René ; Kwade, Arno ; Krewer, Ulrike:
Model‐Based Uncertainty Quantification for the Product Properties of Lithium‐Ion Batteries.
In: Energy Technology. Vol. 8 (2020) Issue 2 . - No. 1900201.
DOI: https://doi.org/10.1002/ente.201900201

Volltext
Herrmann, Julia ; Hagen, Gunter ; Kita, Jaroslaw ; Noack, Frank ; Bleicker, Dirk ; Moos, Ralf:
Multi-gas sensor to detect simultaneously nitrogen oxides and oxygen.
In: Journal of Sensors and Sensor Systems. Vol. 9 (2020) Issue 2 . - pp. 327-335.
DOI: https://doi.org/10.5194/jsss-9-327-2020

Puchas, Georg ; Möckel, Stefan ; Krenkel, Walter:
Novel prepreg manufacturing process for oxide fiber composites.
In: Journal of the European Ceramic Society. Vol. 40 (2020) Issue 15 . - pp. 5930-5941.
DOI: https://doi.org/10.1016/j.jeurceramsoc.2020.06.064

Gebhard, Marcus ; Tichter, Tim ; Schneider, Jonathan ; Mayer, Jacob ; Hilger, André ; Osenberg, Markus ; Rahn, Mirko ; Manke, Ingo ; Roth, Christina:
On the stability of bismuth in modified carbon felt electrodes for vanadium redox flow batteries : An in-operando X-ray computed tomography study.
In: Journal of Power Sources. Vol. 478 (2020) . - No. 228695.
DOI: https://doi.org/10.1016/j.jpowsour.2020.228695

Volltext
Mader, Michael ; Helm, Moritz ; Lu, Mingxia ; Stenzel, Martina H. ; Jérôme, Valérie ; Agarwal, Seema ; Freitag, Ruth ; Greiner, Andreas:
Perfusion Cultivation of Artificial Liver ECM in Fibrous Polymer Sponges Biomimicking Scaffolds for Tissue Engineering.
In: Biomacromolecules. Vol. 21 (2020) Issue 10 . - pp. 4094-4104.
DOI: https://doi.org/10.1021/acs.biomac.0c00900

Volltext
Kirschen, Marcus ; Jung, In-Ho ; Hackl, Gernot:
Phase equilibrium diagram for EAF slag optimization in high alloyed Chromium stainless steelmaking.
In: Metals. Vol. 10 (2020) Issue 6 . - No. 826.
DOI: https://doi.org/10.3390/met10060826

Schleifer, Felix ; Holzinger, Markus ; Lin, Yueh-Yu ; Glatzel, Uwe ; Fleck, Michael:
Phase-field modeling of γ/γ'' microstructure formation in Ni-based superalloys with high γ'' volume fraction.
In: Intermetallics. Vol. 120 (2020) . - No. 106745.
DOI: https://doi.org/10.1016/j.intermet.2020.106745

Volltext
Simeon, Meshack I. ; Asoiro, Felix U. ; Aliyu, Mohamad ; Raji, Olayinka A. ; Freitag, Ruth:
Polarization and power density trends of a soil-based microbial fuel cell treated with human urine.
In: International Journal of Energy Research. Vol. 44 (2020) Issue 7 . - pp. 5968-5976.
DOI: https://doi.org/10.15495/EPub_UBT_00005040

Volltext
Barroso, Gilvan S. ; Döring, Michael ; Horcher, Alexander ; Kienzle, Andreas ; Motz, Günter:
Polysilazane-Based Coatings with Anti-Adherent Properties for Easy Release of Plastics and Composites from Metal Molds.
In: Advanced Materials Interfaces. Vol. 7 (2020) Issue 10 . - No. 1901952.
DOI: https://doi.org/10.15495/EPub_UBT_00005032

Schnucklake, Maike ; Kaßner, Lysann ; Mehring, Michael ; Roth, Christina:
Porous carbon–carbon composite electrodes for vanadium redox flow batteries synthesized by twin polymerization.
In: RSC Advances. Vol. 10 (2020) Issue 68 . - pp. 41926-41935.
DOI: https://doi.org/10.1039/d0ra07741k

Delikaya, Öznur ; Bevilacqua, Nico ; Eifert, László ; Kunz, Ulrike ; Zeis, Roswitha ; Roth, Christina:
Porous electrospun carbon nanofibers network as an integrated electrode@gas diffusion layer for high temperature polymer electrolyte membrane fuel cells.
In: Electrochimica Acta. Vol. 345 (2020) . - No. 136192.
DOI: https://doi.org/10.1016/j.electacta.2020.136192

Brüggemann, Dieter ; Jess, Andreas ; Linhardt, Christoph:
Power-to-Gas als Schlüsseltechnologie : Die Vernetzung des Strom- und Gassektors für eine nachhaltige Energiewirtschaft.
In: Spektrum. Vol. 16 (2020) Issue 1 . - pp. 16-21.

Volltext

Volltext

Bargel, Hendrik ; Hopfe, Charlotte ; Scheibel, Thomas:
Proteinfasern als Hochleistungsmaterial : Evolution, Eigenschaften und Anwendungen von Spinnenseide.
In: Biologie in unserer Zeit. Vol. 50 (2020) Issue 6 . - pp. 434-443.
DOI: https://doi.org/10.1002/biuz.202010724

Mohr, Johannes ; Kleinschrodt, Claudia ; Rieg, Frank:
Qualitativ hochwertige Daten als Basis von Industrie 4.0.
In: Maschinenbau : das Schweizer Industrie-Magazin. Vol. 49 (2020) Issue 4 . - pp. 16-18.

Helbig, Christoph ; Thorenz, Andrea ; Tuma, Axel:
Quantitative assessment of dissipative losses of 18 metals.
In: Resources, Conservation and Recycling. Vol. 153 (2020) . - No. 104537.
DOI: https://doi.org/10.1016/j.resconrec.2019.104537

Tichter, Tim ; Andrae, Dirk ; Schneider, Jonathan ; Gebhard, Marcus ; Hilger, André ; Manke, Ingo ; Roth, Christina:
Real-space simulation of cyclic voltammetry in carbon felt electrodes by combining micro X-ray CT data, digital simulation and convolutive modeling.
In: Electrochimica Acta. Vol. 353 (2020) . - No. 136487.
DOI: https://doi.org/10.1016/j.electacta.2020.136487

Volltext
Kumari, Sushma ; Bargel, Hendrik ; Scheibel, Thomas:
Recombinant Spider Silk–Silica Hybrid Scaffolds with Drug-Releasing Properties for Tissue Engineering Applications.
In: Macromolecular Rapid Communications. Vol. 41 (2020) Issue 1 . - No. 1900426.
DOI: https://doi.org/10.1002/marc.201900426

Dörr, Dominik ; Kuhn, Ute ; Altstädt, Volker:
Rheological Study of Gelation and Crosslinking in Chemical Modified Polyamide 12 Using a Multiwave Technique.
In: Polymers. Vol. 12 (2020) Issue 4 . - No. 855.
DOI: https://doi.org/10.3390/polym12040855

Dörr, Dominik ; Standau, Tobias ; Murillo Castellón, Svenja ; Bonten, Christian ; Altstädt, Volker:
Rheology in the Presence of Carbon Dioxide (CO2) to Study the Melt Behavior of Chemically Modified Polylactide (PLA).
In: Polymers. Vol. 12 (2020) Issue 5 . - No. 1108.
DOI: https://doi.org/10.3390/polym12051108

Müller, Fabian ; Zainuddin, Shakir ; Scheibel, Thomas:
Roll-to-Roll Production of Spider Silk Nanofiber Nonwoven Meshes Using Centrifugal Electrospinning for Filtration Applications.
In: Molecules. Vol. 25 (2020) Issue 23 . - No. 5540.
DOI: https://doi.org/10.3390/molecules25235540

Tichter, Tim ; Schneider, Jonathan ; Nguyen Viet, Duc ; Diaz Duque, Alvaro ; Roth, Christina:
Rotating ring-disc electrode measurements for the quantitative electrokinetic investigation of the V³⁺-reduction at modified carbon electrodes.
In: Journal of Electroanalytical Chemistry. Vol. 859 (2020) . - No. 113843.
DOI: https://doi.org/10.1016/j.jelechem.2020.113843

Volltext
Garbis, Panagiota Katherina ; Jess, Andreas:
Selective CO Methanation in H₂-Rich Gas for Household Fuel Cell Applications.
In: Energies. Vol. 13 (2020) Issue 11 . - No. 2844.
DOI: https://doi.org/10.3390/en13112844

Zakharov, Andrei ; Pismen, Len M. ; Ionov, Leonid:
Shape-morphing architectures actuated by Janus fibers.
In: Soft Matter. Vol. 16 (2020) Issue 8 . - pp. 2086-2092.
DOI: https://doi.org/10.1039/C9SM02441G

Liensdorf, Tom ; Schoch, Rebecca ; Lang, Marieluise ; Langhof, Nico ; Hochrein, Thomas ; Bastian, Martin ; Krenkel, Walter:
Silicon infiltrated silicon carbide from extruded thermoplastic wood polymer composites.
In: International Journal of Applied Ceramic Technology. Vol. 17 (2020) Issue 1 . - pp. 3-10.
DOI: https://doi.org/10.1111/ijac.13404

Volltext
Kögel, Armin ; Aksel, Nuri:
Stability of the channel flow : new phenomena in an old problem.
In: Acta Mechanica. Vol. 231 (2020) . - pp. 1063-1082.
DOI: https://doi.org/10.1007/s00707-019-02568-8

Bucknall, Clive ; Altstädt, Volker ; Auhl, Dietmar ; Buckley, Paul ; Dijkstra, Dirk ; Galeski, Andrzej ; Gögelein, Christoph ; Handge, Ulrich A. ; He, Jiasong ; Liu, Chen-Yang ; Michler, Goerg ; Piorkowska, Ewa ; Slouf, Miroslav ; Vittorias, Iakovos ; Wu, Jun Jie:
Structure, processing and performance of ultra-high molecular weight polyethylene (IUPAC Technical Report). Part 1: characterizing molecular weight.
In: Pure and Applied Chemistry. Vol. 92 (2020) Issue 9 . - pp. 1469-1483.
DOI: https://doi.org/10.1515/pac-2019-0405

Bucknall, Clive ; Altstädt, Volker ; Auhl, Dietmar ; Buckley, Paul ; Dijkstra, Dirk ; Galeski, Andrzej ; Gögelein, Christoph ; Handge, Ulrich A. ; He, Jiasong ; Liu, Chen-Yang ; Michler, Goerg ; Piorkowska, Ewa ; Slouf, Miroslav ; Vittorias, Iakovos ; Wu, Jun Jie:
Structure, processing and performance of ultra-high molecular weight polyethylene (IUPAC Technical Report). Part 2: crystallinity and supra molecular structure.
In: Pure and Applied Chemistry. Vol. 92 (2020) Issue 9 . - pp. 1485-1501.
DOI: https://doi.org/10.1515/pac-2019-0403

Bucknall, Clive ; Altstädt, Volker ; Auhl, Dietmar ; Buckley, Paul ; Dijkstra, Dirk ; Galeski, Andrzej ; Gögelein, Christoph ; Handge, Ulrich A. ; He, Jiasong ; Liu, Chen-Yang ; Michler, Goerg ; Piorkowska, Ewa ; Slouf, Miroslav ; Vittorias, Iakovos ; Wu, Jun Jie:
Structure, processing and performance of ultra-high molecular weight polyethylene (IUPAC Technical Report). Part 3: deformation, wear and fracture.
In: Pure and Applied Chemistry. Vol. 92 (2020) Issue 9 . - pp. 1503-1519.
DOI: https://doi.org/10.1515/pac-2019-0406

Bucknall, Clive ; Altstädt, Volker ; Auhl, Dietmar ; Buckley, Paul ; Dijkstra, Dirk ; Galeski, Andrzej ; Gögelein, Christoph ; Handge, Ulrich A. ; He, Jiasong ; Liu, Chen-Yang ; Michler, Goerg ; Piorkowska, Ewa ; Slouf, Miroslav ; Vittorias, Iakovos ; Wu, Jun Jie:
Structure, processing and performance of ultra-high molecular weight polyethylene (IUPAC Technical Report). Part 4: sporadic fatigue crack propagation.
In: Pure and Applied Chemistry. Vol. 92 (2020) Issue 9 . - pp. 1521-1536.
DOI: https://doi.org/10.1515/pac-2019-0408

Helbig, Christoph ; Bradshaw, Alex M. ; Thorenz, Andrea ; Tuma, Axel:
Supply Risk Considerations for the Elements in Nickel-Based Superalloys.
In: Resources. Vol. 9 (2020) Issue 9 . - No. 106.
DOI: https://doi.org/10.3390/resources9090106

Diaz, Ivonne L. ; Sierra, Cesar A. ; Jérôme, Valérie ; Freitag, Ruth ; Perez, León D.:
Target grafting of poly(2-(dimethylamino)ethyl methacrylate) to biodegradable block copolymers.
In: Journal of Polymer Science. Vol. 58 (2020) Issue 16 . - pp. 2168-2180.
DOI: https://doi.org/10.1002/pol.20200204

Ulan kyzy, Sonun ; Völkl, Rainer ; Munz, Oliver ; Fischer, Tim ; Weizenbach, Sarah ; Glatzel, Uwe:
Thermo-physical properties of Hastelloy X and Haynes 214 close to the melting range.
In: Materials Science and Technology. Vol. 36 (2020) Issue 10 . - pp. 1012-1019.
DOI: https://doi.org/10.1080/02670836.2020.1753154

Shabani, Amin ; Fathi, Amir ; Erlwein, Sebastian ; Altstädt, Volker:
Thermoplastic polyurethane foams : From autoclave batch foaming to bead foam extrusion.
In: Journal of Cellular Plastics. Vol. 57 (2020) Issue 4 . - pp. 391-411.
DOI: https://doi.org/10.1177/0021955X20912201

Hübner, Fabian ; Szpoganicz, Eduardo ; Demleitner, Martin ; Kuhnigk, Justus ; Altstädt, Volker ; Rios de Anda, Agustín:
Time Domain ¹H NMR, Thermomechanical, and Rheology Multiscale Structural Characterization of Polydimethylsiloxane-Toughened Epoxy Nanocomposites for Liquid Composite Molding.
In: ACS Applied Polymer Materials. Vol. 2 (2020) Issue 11 . - pp. 4779-4789.
DOI: https://doi.org/10.1021/acsapm.0c00763

Volltext
Dobrenizki, Ladislaus ; Brugnara, Ricardo H. ; Tremmel, Stephan ; Wartzack, Sandro:
Tribokatalytisches Mo-X-N-Schichtsystem zur Effizienzsteigerung bei Motorelementen.
In: Motortechnische Zeitschrift. Vol. 81 (2020) Issue 6 . - pp. 66-71.
DOI: https://doi.org/10.1007/s38313-020-0228-4

Tichter, Tim ; Schneider, Jonathan ; Andrae, Dirk ; Gebhard, Marcus ; Roth, Christina:
Universal Algorithm for Simulating and Evaluating Cyclic Voltammetry at Macroporous Electrodes by Considering Random Arrays of Microelectrodes.
In: ChemPhysChem. Vol. 21 (2020) Issue 5 . - pp. 428-441.
DOI: https://doi.org/10.1002/cphc.201901113

Du Ngoc, Uy Lan ; Fauzi, Muhammad Syazwan ; Viet, Cao Xuan ; Raps, Daniel ; Altstädt, Volker:
Viscoelastic epoxy foams by an aqueous emulsion foaming process.
In: Journal of Cellular Plastics. Vol. 56 (2020) Issue 1 . - pp. 105-118.
DOI: https://doi.org/10.1177/0021955X19864016

Volltext
Opel, Thorsten:
Vorlaufforschung zum Fügen keramischer Verbundwerkstoffe mit metallischen Tragkörpern.
In: CU reports : Internationales Mitgliedermagazin des Composites United. (2020) Issue 2 . - p. 35.

Volltext
Strube, Franziska ; Rosemann, Bernd:
Der Weg zur CO₂-autarken Brauerei : Verfahren zur CO₂-Rückgewinnung für kleine und mittlere Brauereien.
In: Brauindustrie. Vol. 105 (2020) Issue 06 . - pp. 10-12.

Volltext
Exner, Jörg ; Nazarenus, Tobias ; Hanft, Dominik ; Kita, Jaroslaw ; Moos, Ralf:
What Happens during Thermal Post‐Treatment of Powder Aerosol Deposited Functional Ceramic Films? Explanations Based on an Experiment‐Enhanced Literature Survey.
In: Advanced Materials. Vol. 32 (2020) Issue 19 . - No. 1908104.
DOI: https://doi.org/10.1002/adma.201908104

Gebhard, Marcus ; Schnucklake, Maike ; Hilger, André ; Röhe, Maximilian ; Osenberg, Markus ; Krewer, Ulrike ; Manke, Ingo ; Roth, Christina:
X‐Ray‐Computed Radiography and Tomography Study of Electrolyte Invasion and Distribution inside Pristine and Heat‐Treated Carbon Felts for Redox Flow Batteries.
In: Energy Technology. Vol. 8 (2020) Issue 3 . - No. 1901214.
DOI: https://doi.org/10.1002/ente.201901214

Marian, Max ; Weikert, Tim ; Tremmel, Stephan:
On Friction Reduction by Surface Modifications in the TEHL Cam/Tappet‐Contact‐Experimental and Numerical Studies.
In: Coatings. Vol. 9 (9 December 2019) Issue 12 . - 16 S..
DOI: https://doi.org/10.3390/coatings9120843

Volltext
Mahr, Alexander ; Bay, Christian:
Arbeitssicherheit für die additive Fertigung : Art der Gefährdungen ist stark verfahrensabhängig.
Fraunhofer Institut für Produktionstechnik und Automatisierung; Lehrstuhl Umweltgerechte Produktionstechnik
In: Automationspraxis. (December 2019) Issue 12 . - pp. 58-59.

Mahr, Alexander ; Bay, Christian:
Arbeitssicherheit in der additiven Fertigung : Gefährdungen und Handlungsempfehlungen.
Fraunhofer-Institut für Produktionstechnik und Automatisierung; Lehrstuhl Umweltgerechte Produktionstechnik
In: additive.event. (December 2019) . - p. 7.

Volltext
Mösch, Mario ; Fischerauer, Gerhard:
A comparison of methods to extract the coupling coefficient of electromagnetic vibration energy harvesters by measurements.
In: Micromachines. Vol. 10 (December 2019) Issue 12 . - 14 S.
DOI: https://doi.org/10.3390/mi10120826

Saric, Merisa ; Scheibel, Thomas:
Engineering of silk proteins for materials applications.
In: Current Opinion in Biotechnology. Vol. 60 (December 2019) . - pp. 213-220.
DOI: https://doi.org/10.1016/j.copbio.2019.05.005

Volltext
Mahr, Alexander ; Bay, Christian:
Arbeitssicherheit in der additiven Fertigung : Gefährdungen und Handlungsempfehlungen.
In: additive : Das Magazin für generative Fertigung. (November 2019) Issue 04-2019 . - pp. 54-55.

Fischerauer, Gerhard:
Beiträge der Sensorik zur Energie- und Ressourceneffizienz.
In: Jahresmagazin Mess- und Sensortechnik. Vol. 2019/2020 (November 2019) . - pp. 96-102.

Müller, Verena ; Scurtu, Rares-George ; Richter, Karsten ; Waldmann, Thomas ; Memm, Michaela ; Danzer, Michael A. ; Wohlfahrt-Mehrens, Margret:
Effects of Mechanical Compression on the Aging and the Expansion Behavior of Si/C-Composite| NMC811 in Different Lithium-Ion Battery Cell Formats.
In: Journal of the Electrochemical Society. Vol. 166 (November 2019) Issue 15 . - S. A3796-A3805.
DOI: https://doi.org/10.1149/2.1121915jes

Schindler, Stefan ; Baure, George ; Danzer, Michael A. ; Dubarry, Matthieu:
Kinetics accommodation in Li-ion mechanistic modeling.
In: Journal of Power Sources. Vol. 440 (November 2019) . - No. 227117.
DOI: https://doi.org/10.1016/j.jpowsour.2019.227117

Tremmel, Stephan ; Marian, Max ; Zahner, Michael ; Wartzack, Sandro ; Merklein, Marion:
Friction reduction in EHL contacts by surface microtexturing – tribological performance, manufacturing and tailored design.
In: Industrial Lubrication and Tribology. Vol. 71 (14 October 2019) Issue 8 . - pp. 986-990.
DOI: https://doi.org/10.1108/ILT-08-2018-0306

Pawar, Kiran ; Welzel, Georg ; Haynl, Christian ; Schuster, Stefan ; Scheibel, Thomas:
Recombinant Spider Silk and Collagen-Based Nerve GuidanceConduits Support Neuronal Cell Differentiation and Functionality inVitro.
In: ACS Applied Bio Materials. Vol. 2 (3 October 2019) Issue 11 . - pp. 4872-4880.
DOI: https://doi.org/10.1021/acsabm.9b00628

Marian, Max ; Grützmacher, Philipp ; Rosenkranz, Andreas ; Tremmel, Stephan ; Mücklich, Frank ; Wartzack, Sandro:
Designing surface textures for EHL point-contacts - Transient 3D simulations, meta-modeling and experimental validation.
In: Tribology International. Vol. 137 (September 2019) . - pp. 152-163.
DOI: https://doi.org/10.1016/j.triboint.2019.03.052

Weber, Regino ; Weinbrenner, Marius ; Schreier, Peter ; Neumeyer, Thomas:
EPP-Schäume, mehr als nur heiße Luft Partikelschäume sind ideale Leichtbau-Werkstoffe.
In: Industrie-Anzeiger. (September 2019) .

Volltext
Manzoni, Anna M. ; Haas, Sebastian ; Yu, J. M. ; Daoud, Haneen ; Glatzel, Uwe ; Aboulfadl, Hisham ; Mücklich, Frank T. ; Duran, Rüya ; Schmitz, Guido ; Többens, Daniel M. ; Matsumura, Syo ; Vogel, Florian ; Wanderka, Nelia:
Evolution of γ/γ' phases, their misfit and volume fractions in Al10Co25Cr8Fe15Ni36Ti6 compositionally complex alloy.
In: Materials Characterization. Vol. 154 (August 2019) . - pp. 363-376.
DOI: https://doi.org/10.1016/j.matchar.2019.06.009

Weiß, A.P. ; Popp, T. ; Zinn, G. ; Preißinger, Markus ; Brüggemann, Dieter:
A micro-turbine-generator-construction-kit (MTG-c-kit) for small-scale waste heat recovery ORC-Plants.
In: Energy. Vol. 181 (August 2019) . - pp. 51-55.
DOI: https://doi.org/10.1016/j.energy.2019.05.135

Popp, Robert ; Haas, Sebastian ; Scherm, Florian ; Redermeier, Alice ; Povoden-Karadeniz, Erwin ; Göhler, Thomas ; Glatzel, Uwe:
Determination of Solubility Limits of Refractory Elements in TCP Phases of the Ni-Mo-Cr Ternary System Using Diffusion Multiples.
In: Journal of Alloys and Compounds. Vol. 788 (June 2019) . - pp. 67-74.
DOI: https://doi.org/10.1016/j.jallcom.2019.01.329

Peter, Ronny ; Fischerauer, Gerhard:
Measurement of Axially Inhomogeneous Permittivity Distributions in Resonant Microwave Cavities.
In: IEEE Transactions on Microwave Theory and Techniques. Vol. 67 (June 2019) Issue 6 . - pp. 2433-2442.
DOI: https://doi.org/10.1109/TMTT.2019.2910177

Habla, Franz ; Kropka, Michael ; Mühlbacher, Mathias ; Neumeyer, Thomas ; Altstädt, Volker:
Tailor Made Hybrid Laminates Based on UD-Tapes : A Way to Efficient Thermoplastic Components.
In: Key Engineering Materials. Vol. 809 (June 2019) . - pp. 41-46.
DOI: https://doi.org/10.4028/www.scientific.net/KEM.809.41

Faden, Moritz ; Linhardt, Christoph ; Höhlein, Stephan ; König-Haagen, Andreas ; Brüggemann, Dieter:
Velocity field and phase boundary measurements during melting of n-octadecane in a cubical test cell.
In: International Journal of Heat and Mass Transfer. Vol. 135 (June 2019) . - pp. 104-114.
DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2019.01.056

Toselli, Davide ; Heberle, Florian ; Brüggemann, Dieter:
Techno-Economic Analysis of Hybrid Binary Cycles with Geothermal Energy and Biogas Waste Heat Recovery.
In: Energies. Vol. 12 (23 May 2019) Issue 10 . - No. 1969.
DOI: https://doi.org/10.3390/en12101969

Kupper, Christian ; Spitznagel, Svenja ; Döring, Harry ; Danzer, Michael A. ; Gutierrez, César ; Kvasha, Andriy ; Besslera, Wolfgang G.:
Combined modeling and experimental study of the high-temperature behavior of a lithium-ion cell : Differential scanning calorimetry, accelerating rate calorimetry and external short circuit.
In: Electrochimica Acta. Vol. 306 (20 May 2019) . - pp. 209-219.
DOI: https://doi.org/10.1016/j.electacta.2019.03.079

Fetyan, Abdulmonem ; El-Nagar, Gumaa A. ; Lauermann, Iver ; Schnucklake, Maike ; Schneider, Jonathan ; Roth, Christina:
Detrimental role of hydrogen evolution and its temperature-dependent impact on the performance of vanadium redox flow batteries.
In: Journal of Energy Chemistry. Vol. 32 (May 2019) . - pp. 57-62.
DOI: https://doi.org/10.1016/j.jechem.2018.06.010

da Silva, Pollyana Ferreira ; Gomes, Bruna Ferreira ; Lobo, Carlos Manuel Silva ; Queiroz Junior, Luiz Henrique Keng ; Danieli, Ernesto ; Carmo, Marcelo ; Blümich, Bernhard ; Colnago, Luiz Alberto:
Electrochemical NMR spectroscopy : Electrode construction and magnetic sample stirring.
In: Microchemical Journal. Vol. 146 (May 2019) . - pp. 658-663.
DOI: https://doi.org/10.1016/j.microc.2019.01.010

Ritter, Thomas ; Lattus, Julia ; Hagen, Gunter ; Moos, Ralf:
A finite element model for mixed potential sensors.
In: Sensors and Actuators B: Chemical. Vol. 287 (May 2019) . - pp. 476-485.
DOI: https://doi.org/10.1016/j.snb.2019.02.052

Rieg, Frank ; Roppel, Matthias ; Dinkel, Christian:
Simulation konvektiver Wärmeübergänge.
In: Newsletter Wissenschaftliche Gesellschaft für Produktentwicklung, WiGeP. Vol. 2019 (May 2019) Issue 1 . - p. 19.

Kuboth, Sebastian ; Heberle, Florian ; König-Haagen, Andreas ; Brüggemann, Dieter:
Economic model predictive control of combined thermal and electric residential building energy systems.
In: Applied Energy. Vol. 240 (15 April 2019) . - pp. 372-385.
DOI: https://doi.org/10.1016/j.apenergy.2019.01.097

Kunz, Raphael ; Martin, Thomas ; Callsen, Christoph ; Hutschreuther, Julia ; Altstädt, Volker ; Breu, Josef:
Thermal expansion of clay polymer nanocomposites as a function of aspect ratio and filler content.
In: Polymer. Vol. 169 (15 April 2019) . - pp. 74-79.
DOI: https://doi.org/10.1016/j.polymer.2019.02.036

Volltext
Eckardt, Christian ; Friedrich, Maximilian ; Wamser, Thomas ; Wolff, Nadja ; Metzger, Klaus:
Gut gerüstet gegen Druck und Hitze : Faserverstärkte Keramik-Armierungen für den Rohrleitungsbau.
In: Chemie-Technik. (April 2019) . - pp. 38-40.

Wang, Jia ; Suhre, Michael H. ; Scheibel, Thomas:
A mussel polyphenol oxidase-like protein shows thiol-mediated antioxidantactivity.
In: European Polymer Journal. Vol. 113 (April 2019) . - pp. 305-312.
DOI: https://doi.org/10.1016/j.eurpolymj.2019.01.069

Królak, Radosław ; Fischerauer, Gerhard:
Scalar Reflectometry as a Means of Catalyst Monitoring Suitable for Field Applications.
In: Measurement. Vol. 137 (April 2019) . - pp. 278-286.
DOI: https://doi.org/10.1016/j.measurement.2019.01.030

Lobo, Carlos Manuel Silva ; Gomes, Bruna Ferreira ; Bouzouma, Hajar ; Danieli, Ernesto ; Blümich, Bernhard ; Colnago, Luiz Alberto:
Improving in operando low field NMR copper electrodeposition analyses using inductively coupled coils.
In: Electrochimica Acta. Vol. 298 (March 2019) . - pp. 844-851.
DOI: https://doi.org/10.1016/j.electacta.2018.12.076

Röber, Matthias ; Laroque, Sophie ; Scheibel, Thomas ; Börner, Hans G.:
Modulating the collagen triple helix formation by switching : Positioning effects of depsi-defects on the assembly of [Gly-Pro-Pro]7 collagen mimetic peptides.
In: European Polymer Journal. Vol. 112 (March 2019) . - pp. 301-305.
DOI: https://doi.org/10.1016/j.eurpolymj.2018.12.045

Röder, Fridolin ; Braatz, Richard D. ; Krewer, Ulrike:
Direct coupling of continuum and kinetic Monte Carlo models for multiscale simulation of electrochemical systems.
In: Computers & Chemical Engineering. Vol. 121 (2 February 2019) . - pp. 722-735.
DOI: https://doi.org/10.1016/j.compchemeng.2018.12.016

Rothammer, Benedict ; Weikert, Tim ; Tremmel, Stephan ; Wartzack, Sandro:
Tribologisches Verhalten amorpher Kohlenstoffschichten auf Metallen für die Knie-Totalendoprothetik.
In: Tribologie und Schmierungstechnik. Vol. 66 (February 2019) Issue 1 . - pp. 15-24.
DOI: https://doi.org/10.30419/TUS-2019-0002

Volltext
Manzoni, Anna M. ; Glatzel, Uwe:
New Multiphase Compositionally Complex Alloys Driven by the High Entropy Alloy Approach.
In: Materials Characterization. Vol. 147 (January 2019) . - pp. 512-532.
DOI: https://doi.org/10.1016/j.matchar.2018.06.036

Volltext

Delsing, Per ; Cleland, Andrew N ; Schuetz, Martin J A ; Knörzer, Johannes ; Giedke, Géza ; Cirac, J Ignacio ; Srinivasan, Kartik ; Wu, Marcelo ; Coimbatore Balram, Krishna ; Bäuerle, Christopher ; Meunier, Tristan ; Ford, Christopher J B ; Santos, Paulo V ; Cerda-Méndez, Edgar ; Wang, Hailin ; Krenner, Hubert J ; Nysten, Emeline D S ; Weiß, Matthias ; Nash, Geoff R ; Thevenard, Laura ; Gourdon, Catherine ; Rovillain, Pauline ; Marangolo, Max ; Duquesne, Jean-Yves ; Fischerauer, Gerhard ; Ruile, Werner ; Reiner, Alexander ; Paschke, Ben ; Denysenko, Dmytro ; Volkmer, Dirk ; Wixforth, Achim ; Bruus, Henrik ; Wiklund, Martin ; Reboud, Julien ; Cooper, Jonathan M ; Fu, YongQing ; Brugger, Manuel S ; Rehfeldt, Florian ; Westerhausen, Christoph:
The 2019 surface acoustic waves roadmap.
In: Journal of Physics D. Vol. 52 (2019) Issue 35 . - No. 353001.
DOI: https://doi.org/10.1088/1361-6463/ab1b04

Rößler, Stefan ; Kern, Christoph ; Jess, Andreas:
Accumulation of liquid hydrocarbons during cobalt-catalyzed Fischer–Tropsch synthesis - influence of activity and chain growth probability.
In: Catalysis Science & Technology. Vol. 9 (2019) Issue 15 . - pp. 4047-4054.
DOI: https://doi.org/10.1039/C9CY00671K

Volltext
Schwinger, Laura ; Lehmann, Sebastian ; Zielbauer, Lukas ; Scharfe, Benedikt ; Gerdes, Thorsten:
Aluminum Coated Micro Glass Spheres to Increase the Infrared Reflectance.
In: Coatings. Vol. 9 (2019) Issue 3 . - No. 187.
DOI: https://doi.org/10.3390/coatings9030187

Volltext
Weithmann, Nicolas ; Mlinar, Stanislava ; Hilbrig, Frank ; Bachmaf, Samer ; Arndt, Julia ; Planer-Friedrich, Britta ; Weig, Alfons ; Freitag, Ruth:
Arsenic metabolism in technical biogas plants : possible consequences for resident microbiota and downstream units.
In: AMB Express. Vol. 9 (2019) . - No. 190.
DOI: https://doi.org/10.1186/s13568-019-0902-6

Volltext
Wartzack, Sandro ; Rothammer, Benedict ; Marian, Max ; Wolf, Alexander ; Miehling, Jörg ; Tremmel, Stephan:
Auslegung von amorphen Kohlenstoffschichten für Knie-Totalendoprothesen.
In: Newsletter Wissenschaftliche Gesellschaft für Produktentwicklung, WiGeP. (2019) Issue 2 . - pp. 8-9.

Volltext
Bakran, Mark-M. ; Gleißner, Michael ; Bertelshofer, Teresa:
Batterien und elektrische Antriebe : Systembetrachtungen für die Elektromobilität.
In: Spektrum. Vol. 15 (2019) Issue 1 . - pp. 42-46.

Oyekale, Joseph Oyetola ; Heberle, Florian ; Petrollese, Mario ; Brüggemann, Dieter ; Cau, Giorgio:
Biomass retrofit for existing solar organic Rankine cycle power plants : Conceptual hybridization strategy and techno-economic assessment.
In: Energy Conversion and Management. Vol. 196 (2019) . - pp. 831-845.
DOI: https://doi.org/10.1016/j.enconman.2019.06.064

Akhmetova, Irina ; Beyer, Sebastian ; Schutjajew, Konstantin ; Tichter, Tim ; Wilke, Manuel ; Prinz, Carsten ; Martins, Inês C. B. ; Al-Sabbagh, Dominik ; Roth, Christina ; Emmerling, Franziska:
Cadmium benzylphosphonates : the close relationship between structure and properties.
In: CrystEngComm. Vol. 21 (2019) Issue 39 . - pp. 5958-5964.
DOI: https://doi.org/10.1039/c9ce00776h

Volltext
Steiner, Carsten ; Malashchuk, Vladimir ; Kubinski, David ; Hagen, Gunter ; Moos, Ralf:
Catalyst State Diagnosis of Three-Way Catalytic Converters Using Different Resonance Parameters : A Microwave Cavity Perturbation Study.
In: Sensors. Vol. 19 (2019) Issue 16 . - p. 3559.
DOI: https://doi.org/10.3390/s19163559

Volltext
Standau, Tobias ; Zhao, Chunjing ; Murillo Castellón, Svenja ; Bonten, Christian ; Altstädt, Volker:
Chemical Modification and Foam Processing of Polylactide (PLA).
In: Polymers. Vol. 11 (2019) Issue 2 .
DOI: https://doi.org/10.15495/EPub_UBT_00004643

Fetyan, Abdulmonem ; Schneider, Jonathan ; Schnucklake, Maike ; El-Nagar, Gumaa A. ; Banerjee, Rupak ; Bevilacqua, Nico ; Zeis, Roswitha ; Roth, Christina:
Comparison of Electrospun Carbon−Carbon Composite and Commercial Felt for Their Activity and Electrolyte Utilization in Vanadium Redox Flow Batteries.
In: ChemElectroChem. Vol. 6 (2019) Issue 1 . - pp. 130-135.
DOI: https://doi.org/10.1002/celc.201801128

Muench, Falk ; El-Nagar, Gumaa A. ; Tichter, Tim ; Zintler, Alexander ; Kunz, Ulrike ; Molina-Luna, Leopoldo ; Sikolenko, Vadim ; Pasquini, Chiara ; Lauermann, Iver ; Roth, Christina:
Conformal Solution Deposition of Pt-Pd Titania Nanocomposite Coatings for Light-Assisted Formic Acid Electro-Oxidation.
In: ACS Applied Materials & Interfaces. Vol. 11 (2019) Issue 46 . - pp. 43081-43092.
DOI: https://doi.org/10.1021/acsami.9b12783

Volltext
Zhang, Yaoming ; Ionov, Leonid:
Controllable self-rolling of polyurethane/SiO₂ film with differential density.
In: European Polymer Journal. Vol. 119 (2019) . - pp. 32-36.
DOI: https://doi.org/10.1016/j.eurpolymj.2019.07.004

Volltext
Bard, Simon ; Schönl, Florian ; Demleitner, Martin ; Altstädt, Volker:
Copper and Nickel Coating of Carbon Fiber for Thermally and Electrically Conductive Fiber Reinforced Composites.
In: Polymers. Vol. 11 (2019) Issue 5 .
DOI: https://doi.org/10.15495/EPub_UBT_00004667

Helbig, Christoph ; Bradshaw, Alex M. ; Wietschel, Lars ; Thorenz, Andrea ; Tuma, Axel:
Corrigendum to "Supply risks associated with lithium-ion battery materials" J. Clean. Prod. 172 (2018) 274-286.
In: Journal of Cleaner Production. Vol. 221 (2019) . - pp. 899-903.
DOI: https://doi.org/10.1016/j.jclepro.2019.03.062

Fischer, Tim ; Werner, Ewald ; Ulan kyzy, Sonun ; Munz, Oliver:
Crystal plasticity modeling of polycrystalline Ni-base superalloy honeycombs under combined thermo-mechanical loading.
In: Continuum Mechanics and Thermodynamics. Vol. 31 (2019) Issue 3 . - pp. 703-713.
DOI: https://doi.org/10.1007/s00161-018-0721-z

Almeida, Renato S. M. ; Yang, Li ; Besser, Benjamin ; Xiao, Peng ; Zhou, Wei ; Brückner, Alexander ; Langhof, Nico ; Tushtev, Kamen ; Krenkel, Walter ; Rezwan, Kurosch:
Damage analysis of 2.5D C/C-SiC composites subjected to fatigue loadings.
In: Journal of the European Ceramic Society. Vol. 39 (2019) Issue 7 . - pp. 2244-2250.
DOI: https://doi.org/10.1016/j.jeurceramsoc.2019.01.014

Schneider, Jonathan ; Bulczak, Eduard ; El-Nagar, Gumaa A. ; Gebhard, Marcus ; Kubella, Paul ; Schnucklake, Maike ; Fetyan, Abdulmonem ; Derr, Igor ; Roth, Christina:
Degradation Phenomena of Bismuth-Modified Felt Electrodes in VRFB Studied by Electrochemical Impedance Spectroscopy.
In: Batteries. Vol. 5 (2019) Issue 1 . - No. 16.
DOI: https://doi.org/10.3390/batteries5010016

Gebhard, Marcus ; Paulisch, Melanie ; Hilger, André ; Franzen, David ; Ellendorff, Barbara ; Turek, Thomas ; Manke, Ingo ; Roth, Christina:
Design of an In-Operando Cell for X-Ray and Neutron Imaging of Oxygen-Depolarized Cathodes in Chlor-Alkali Electrolysis.
In: Materials. Vol. 12 (2019) Issue 8 . - No. 1275.
DOI: https://doi.org/10.3390/ma12081275

Pfizenmaier, Petra ; Ulrich, Anke S. ; Galetz, Mathias ; Glatzel, Uwe:
Determination of heat treatment parameters by experiments and CALPHAD for precipitate hardening of Cr-Alloys with Si, Ge and Mo.
In: Intermetallics. Vol. 116 (2019) . - No. 106636.
DOI: https://doi.org/10.1016/j.intermet.2019.106636

Volltext
Zehner, Bastian ; Schmidt, Fabian ; Korth, Wolfgang ; Cokoja, Mirza ; Jess, Andreas:
Determination of the Critical Micelle Concentration of Imidazolium Ionic Liquids in Aqueous Hydrogen Peroxide.
Chair of Inorganic and Metal-Organic Chemistry, Faculty of Chemistry and Catalysis Research Center, Technical University of Munich
In: Langmuir. Vol. 35 (2019) Issue 49 . - pp. 16297-16303.
DOI: https://doi.org/10.1021/acs.langmuir.9b02759

Demleitner, Martin ; Sanchez‐Vazquez, Sandra A. ; Raps, Daniel ; Bakis, Gökhan ; Pflock, Tobias ; Chaloupka, Alexander ; Schmölzer, Stefan ; Altstädt, Volker:
Dielectric analysis monitoring of thermoset curing with ionic liquids : From modeling to the prediction in the resin transfer molding process.
In: Polymer Composites. Vol. 40 (2019) Issue 12 . - pp. 4500-4509.
DOI: https://doi.org/10.1002/pc.25306

Volltext
Kleinschrodt, Claudia ; Rieg, Frank:
Der Digitale Zwilling - Freund oder Feind?
In: Jahresmagazin Werkstofftechnik : Ingenieurwissenschaften. (2019) . - pp. 34-38.

Messmann, Lukas ; Helbig, Christoph ; Thorenz, Andrea ; Tuma, Axel:
Economic and environmental benefits of recovery networks for WEEE in Europe.
In: Journal of Cleaner Production. Vol. 222 (2019) . - pp. 655-668.
DOI: https://doi.org/10.1016/j.jclepro.2019.02.244

Marschelke, Claudia ; Puretskiy, Nikolay ; Raguzin, Ivan ; Melnyk, Inga ; Ionov, Leonid ; Synytska, Alla:
Effect of Architecture of Thermoresponsive Copolymer Brushes on Switching of Their Adsorption Properties.
In: Macromolecular Chemistry and Physics. Vol. 220 (2019) Issue 10 . - No. 1900030.
DOI: https://doi.org/10.1002/macp.201900030

Ulan kyzy, Sonun ; Völkl, Rainer ; Munz, Oliver ; Fischer, Tim ; Glatzel, Uwe:
The Effect of Brazing on Microstructure of Honeycomb Liner Material Hastelloy X.
In: Journal of Materials Engineering and Performance. Vol. 28 (2019) Issue 4 . - pp. 1909-1913.
DOI: https://doi.org/10.1007/s11665-019-03910-w

Volltext
Bard, Simon ; Demleitner, Martin ; Weber, Regino ; Zeiler, Rico ; Altstädt, Volker:
Effect of Curing Agent on the Compressive Behavior at Elevated Test Temperature of Carbon Fiber-Reinforced Epoxy Composites.
In: Polymers. Vol. 11 (2019) Issue 6 . - No. 943.
DOI: https://doi.org/10.15495/EPub_UBT_00004670

Volltext
Bethke, Christian ; Sanchez-Vazquez, Sandra A. ; Raps, Daniel ; Bakis, Gökhan ; Bard, Simon ; Du Ngoc, Uy Lan ; Altstädt, Volker:
Effect of Resin and Blocked/Unblocked Hardener Mixture on the Production of Epoxy Foams with CO₂ Blocked Hardener in Batch Foaming Process.
In: Polymers. Vol. 11 (2019) Issue 5 . - No. 793.
DOI: https://doi.org/10.3390/polym11050793

Schutjajew, Konstantin ; Yan, Runyu ; Antonietti, Markus ; Roth, Christina ; Oschatz, Martin:
Effects of Carbon Pore Size on the Contribution of Ionic Liquid Electrolyte Phase Transitions to Energy Storage in Supercapacitors.
In: Frontiers in Materials. Vol. 6 (2019) . - No. 65.
DOI: https://doi.org/10.3389/fmats.2019.00065

Standau, Tobias ; Murillo Castellón, Svenja ; Delavoie, Agathe ; Bonten, Christian ; Altstädt, Volker:
Effects of chemical modifications on the rheological and the expansion behavior of polylactide (PLA) in foam extrusion.
In: e-Polymers. Vol. 19 (2019) Issue 1 . - pp. 297-304.
DOI: https://doi.org/10.1515/epoly-2019-0030

Ta, Na ; Wang, Kai ; Yin, Xiaoyan ; Fleck, Michael ; Hüter, Claas:
Elastically induced pattern formation in the initial and frustrated growth regime of bainitic subunits.
In: AIMS Materials Science. Vol. 6 (2019) Issue 1 . - pp. 52-62.
DOI: https://doi.org/10.3934/matersci.2019.1.52

Kottakkat, Tintula ; Klingan, Katharina ; Jiang, Shan ; Jovanov, Zarko P. ; Davies, Veronica H. ; El-Nagar, Gumaa A. ; Dau, Holger ; Roth, Christina:
Electrodeposited AgCu Foam Catalysts for Enhanced Reduction of CO₂ to CO.
In: ACS Applied Materials & Interfaces. Vol. 11 (2019) Issue 16 . - pp. 14734-14744.
DOI: https://doi.org/10.1021/acsami.8b22071

Volltext
Mierdel, Konstantin ; Jess, Andreas ; Gerdes, Thorsten ; Schmidt, Achim ; Hintzer, Klaus:
Energy and Resource Efficient Production of Fluoroalkenes in High Temperature Microreactors.
In: ChemEngineering. Vol. 3 (2019) Issue 4 . - No. 77.
DOI: https://doi.org/10.3390/chemengineering3040077

Chauhan, Vikrant ; Huck, Christian ; Frank, Astrid ; Akstaller, Wolfgang ; Weigel, Robert ; Hagelauer, Amelie:
Enhancing RF Bulk Acoustic Wave Devices : Multiphysical Modeling and Performance.
In: IEEE Microwave Magazine. Vol. 20 (2019) Issue 10 . - pp. 56-70.
DOI: https://doi.org/10.1109/MMM.2019.2928677

Kuboth, Sebastian ; Heberle, Florian ; Weith, Theresa ; Welzl, Matthias ; König-Haagen, Andreas ; Brüggemann, Dieter:
Experimental short-term investigation of model predictive heat pump control in residential buildings.
In: Energy and Buildings. Vol. 204 (2019) . - No. 109444.
DOI: https://doi.org/10.1016/j.enbuild.2019.109444

Aksit, Merve ; Zhao, Chunjing ; Klose, Bastian ; Kreger, Klaus ; Schmidt, Hans-Werner ; Altstädt, Volker:
Extruded Polystyrene Foams with Enhanced Insulation and Mechanical Properties by a Benzene-Trisamide-Based Additive.
In: Polymers. Vol. 11 (2019) Issue 2 . - No. 268.
DOI: https://doi.org/10.3390/polym11020268

Jiang, Xu ; Bakran, Mark-M.:
Fault Current Behavior of MMC with the First Blocking Method.
In: IEEE Transactions on Power Electronics. Vol. 34 (2019) Issue 12 . - pp. 11616-11628.
DOI: https://doi.org/10.1109/TPEL.2019.2904549

Kandlbinder-Paret, Christoph ; Fischerauer, Alice ; Fischerauer, Gerhard:
Fill-level measurement using capacitance sensors with adaptively configurable electrodes for resolution enhancement.
In: Measurement Science and Technology. Vol. 30 (2019) Issue 4 . - No. 045101.
DOI: https://doi.org/10.1088/1361-6501/ab0486

Wächtler, Maria ; González, Leticia ; Dietzek, Benjamin ; Turchanin, Andrey ; Roth, Christina:
Functional materials : making the world go round.
In: Physical Chemistry Chemical Physics. Vol. 21 (2019) Issue 18 . - pp. 8988-8991.
DOI: https://doi.org/10.1039/c9cp90120e

Volltext
Roppel, Matthias ; Alber-Laukant, Bettina ; Rieg, Frank:
Further developments of the simulation tool Z88ENSI for the independent assessment of the thermal and mechanical dimensioning of transport and storage casks.
In: ENSI Erfahrungs- und Forschungsbericht. Vol. 2019 (2019) . - pp. 273-279.

Leupold, Nico ; Schötz, Konstantin ; Cacovich, Stefania ; Bauer, Irene ; Schultz, Maximilian ; Daubinger, Monika ; Kaiser, Leah ; Rebai, Amelle ; Rousset, Jean ; Köhler, Anna ; Schulz, Philip ; Moos, Ralf ; Panzer, Fabian:
High Versatility and Stability of Mechanochemically Synthesized Halide Perovskite Powders for Optoelectronic Devices.
In: ACS Applied Materials & Interfaces. Vol. 11 (2019) Issue 33 . - pp. 30259-30268.
DOI: https://doi.org/10.1021/acsami.9b09160

Reich, Steffen ; Kaiser, Patrick ; Mafi, Mahsa ; Schmalz, Holger ; Rhinow, Daniel ; Freitag, Ruth ; Greiner, Andreas:
High‐Temperature Spray‐Dried Polymer/Bacteria Microparticles for Electrospinning of Composite Nonwovens.
In: Macromolecular Bioscience. Vol. 19 (2019) Issue 5 . - No. 1800356.
DOI: https://doi.org/10.1002/mabi.201800356

Exner, Jörg ; Schubert, Michael ; Hanft, Dominik ; Kita, Jaroslaw ; Moos, Ralf:
How to treat powders for the room temperature aerosol deposition method to avoid porous, low strength ceramic films.
In: Journal of the European Ceramic Society. Vol. 39 (2019) Issue 2-3 . - pp. 592-600.
DOI: https://doi.org/10.1016/j.jeurceramsoc.2018.08.008

Volltext
Michlik, Tobias ; Rosin, Andreas ; Gerdes, Thorsten ; Moos, Ralf:
Improved Discharge Capacity of Zinc Particles by Applying Bismuth-Doped Silica Coating for Zinc-Based Batteries Batteries.
In: Batteries. Vol. 5 (2019) Issue 1 . - No. 32.
DOI: https://doi.org/10.3390/batteries5010032

Utaloff, Katja ; Kothmann, Martin Heinz ; Ciesielski, Michael ; Döring, Manfred ; Neumeyer, Thomas ; Altstädt, Volker ; Gorman, Irene ; Henningsen, Michael:
Improvement of fracture toughness and glass transition temperature of DGEBA‐based epoxy systems using toughening and crosslinking modifiers.
In: Polymer Engineering and Science. Vol. 59 (2019) Issue 1 . - pp. 86-95.
DOI: https://doi.org/10.1002/pen.24870

Exner, Jörg ; Kita, Jaroslaw ; Moos, Ralf:
In- and through-plane conductivity of 8YSZ films produced at room temperature by aerosol deposition.
In: Journal of Materials Science. Vol. 54 (2019) Issue 21 . - pp. 13619-13634.
DOI: https://doi.org/10.1007/s10853-019-03844-7

Volltext
Fischerauer, Gerhard ; Kull, Tobias:
Industrielle und kommunale Anlagen : Energieoptimierter Betrieb mithilfe intelligenter Batteriesteuerung.
In: Spektrum. Vol. 15 (2019) Issue 1 . - pp. 54-59.

Müller, Niels ; Lang, Steffen ; Moos, Ralf:
Influence of Ambient Conditions on Electrical Partial Discharge Resistance of Epoxy Anhydride Based Polymers Using IEC 60343 Method.
In: IEEE Transactions on Dielectrics and Electrical Insulation. Vol. 26 (2019) Issue 5 . - pp. 1463-1470.
DOI: https://doi.org/10.1109/TDEI.2019.008070

Volltext

Dinkel, Christian ; Billenstein, Daniel ; Rieg, Frank ; Roith, Bernd:
Influence of Gas-Filled Gaps on the Thermal Behaviour of Dual Purpose Casks.
In: Proceedings of the Design Society: International Conference on Engineering Design. Vol. 1 (2019) Issue 1 . - pp. 1533-1542.
DOI: https://doi.org/10.1017/dsi.2019.159

Keller, Jan-Hendrik ; Altstädt, Volker:
Influence of mid-stress on the dynamic fatigue of a light weight EPS bead foam.
In: e-Polymers. Vol. 19 (2019) Issue 1 . - pp. 349-354.
DOI: https://doi.org/10.1515/epoly-2019-0036

Donker, Nils ; Ruchets, Anastasiya ; Schönauer-Kamin, Daniela ; Zosel, Jens ; Guth, Ulrich ; Moos, Ralf:
Influence of polarization time and polarization current of Pt|YSZ-based NO sensors utilizing the pulsed polarization when applying constant charge.
In: Sensors and Actuators B: Chemical. Vol. 290 (2019) . - pp. 28-33.
DOI: https://doi.org/10.1016/j.snb.2019.03.060

Bresch, Sophie ; Mieller, Bjoern ; Schönauer-Kamin, Daniela ; Moos, Ralf ; Giovanelli, Fabien ; Rabe, Torsten:
Influence of pressure assisted sintering and reaction sintering on microstructure and thermoelectric properties of bi-doped and undoped calcium cobaltite.
In: Journal of Applied Physics. Vol. 126 (2019) Issue 7 . - No. 075102.
DOI: https://doi.org/10.1063/1.5107476

Steiner, Dominik ; Lang, Gregor ; Fischer, Laura ; Winkler, Sophie ; Fey, Tobias ; Greil, Peter ; Scheibel, Thomas ; Horch, Raymund E. ; Arkudas, Andreas:
Intrinsic Vascularization of Recombinant eADF4(C16) Spider Silk Matrices in the Arteriovenous Loop Model.
In: Tissue Engineering Part A. Vol. 25 (2019) Issue 21-22 . - pp. 1504-1513.
DOI: https://doi.org/10.1089/ten.tea.2018.0360

Schubert, Michaela ; Kita, Jaroslaw ; Münch, Christian ; Moos, Ralf:
Investigation of the in situ calcination of aerosol co-deposited NiO-Mn₂O₃ films.
In: Functional Materials Letters. Vol. 12 (2019) Issue 3 . - No. 1950039.
DOI: https://doi.org/10.1142/S1793604719500395

Volltext
Häublein, Markus ; Peter, Karin ; Bakis, Gökhan ; Mäkimieni, Roi ; Altstädt, Volker ; Möller, Martin:
Investigation on the Flame Retardant Properties and Fracture Toughness of DOPO and Nano-SiO2 Modified Epoxy Novolac Resin and Evaluation of Its Combinational Effects.
In: Materials. Vol. 12 (2019) Issue 9 . - No. 1528.
DOI: https://doi.org/10.15495/EPub_UBT_00004668

Akram, Muhammad Yasir ; Casalegno, Valentina ; Ferraris, Monica ; Puchas, Georg ; Krenkel, Walter ; Roszeitis, Sven:
Joining and mechanical testing of oxide/oxide (Nextel ™610/aluminazirconia) ceramic composites.
In: Journal of the European Ceramic Society. Vol. 39 (2019) Issue 7 . - pp. 2510-2517.
DOI: https://doi.org/10.1016/j.jeurceramsoc.2019.02.020

Laue, Vincent ; Röder, Fridolin ; Krewer, Ulrike:
Joint structural and electrochemical modeling : Impact of porosity on lithium-ion battery performance.
In: Electrochimica Acta. Vol. 314 (2019) . - pp. 20-31.
DOI: https://doi.org/10.1016/j.electacta.2019.05.005

Schäffer, Johannes ; Zehner, Bastian ; Korth, Wolfgang ; Cokoja, Mirza ; Jess, Andreas:
Kinetic Model of Two-Phase Epoxidation with Ionic Liquids as Micellar Catalysts.
In: Chemical Engineering & Technology. Vol. 42 (2019) Issue 1 . - pp. 232-240.
DOI: https://doi.org/10.1002/ceat.201800399

Volltext

Stoychev, Georgi ; Kirillova, Alina ; Ionov, Leonid:
Light-Responsive Shape-Changing Polymers.
In: Advanced Optical Materials. Vol. 7 (2019) Issue 16 . - No. 1900067.
DOI: https://doi.org/10.1002/adom.201900067

Aschenbrenner, Alexander ; Schleich, Benjamin ; Tremmel, Stephan ; Wartzack, Sandro ; Stahl, Thomas:
"MAGMAKegel" : Simulation abweichungsbehafteter Kegelrollenlager.
In: Konstruktion. Vol. 71 (2019) Issue 11/12 . - pp. 52-54.

Volltext
Nieke, Philipp ; Kita, Jaroslaw ; Häming, Marc ; Moos, Ralf:
Manufacturing Dense Thick Films of Lunar Regolith Simulant EAC-1 at Room Temperature.
In: Materials. Vol. 12 (2019) Issue 3 . - No. 487.
DOI: https://doi.org/10.3390/ma12030487

Grünewald, Jonas ; Parlevliet, Patricia P. ; Matschinski, Alexander ; Altstädt, Volker:
Mechanical performance of CF/PEEK–PEI foam core sandwich structures.
In: Journal of Sandwich Structures and Materials. Vol. 21 (2019) Issue 8 . - pp. 2680-2699.
DOI: https://doi.org/10.1177/1099636217715704

Liensdorf, Tom ; Langhof, Nico ; Krenkel, Walter:
Mechanical properties of PEEK-Derived C/SiC Composites with Different Fiber Lengths.
In: Advanced Engineering Materials. Vol. 21 (2019) Issue 5 . - No. 1800835.
DOI: https://doi.org/10.1002/adem.201800835

Chen, Peirong ; Rizzotto, Valentina ; Khetan, Abhishek ; Xie, Kunpeng ; Moos, Ralf ; Pitsch, Heinz ; Ye, Daiqi ; Simon, Ulrich:
Mechanistic understanding of Cu-CHA catalyst as sensor for direct NH 3-SCR monitoring : the role of Cu mobility.
In: ACS Applied Materials & Interfaces. Vol. 11 (2019) Issue 8 . - pp. 8097-8105.
DOI: https://doi.org/10.1021/acsami.8b22104

Glamsch, Johannes ; Deese, Kevin ; Rieg, Frank:
Methods for Increased Efficiency of FEM-Based Topology Optimization.
In: International Journal of Simulation Modelling. Vol. 18 (2019) Issue 3 . - pp. 453-463.
DOI: https://doi.org/10.2507/IJSIMM18(3)482

Volltext

Röder, Fridolin ; Laue, Vincent ; Krewer, Ulrike:
Model Based Multiscale Analysis of Film Formation in Lithium‐Ion Batteries.
In: Batteries & Supercaps. Vol. 2 (2019) Issue 3 . - pp. 248-265.
DOI: https://doi.org/10.1002/batt.201800107

Gradel, Andy ; Honke, Robert ; Wünning, Joachim Alfred ; Plessing, Tobias ; Jess, Andreas:
Modeling of Biomass Gasification in a Downdraft Gasifier with Integrated Tar Adsorption.
In: Chemical Engineering & Technology. Vol. 42 (2019) Issue 9 . - pp. 1895-1906.
DOI: https://doi.org/10.1002/ceat.201800640

Dietrich, Markus ; Hagen, Gunter ; Moos, Ralf:
Modelling Both the NH₃ Storage on Automotive SCR Catalysts and the Radio-Frequency-Based Response.
In: Topics in Catalysis. Vol. 62 (2019) Issue 1-4 . - pp. 172-178.
DOI: https://doi.org/10.1007/s11244-019-01140-x

Bertelshofer, Teresa ; März, Andreas ; Bakran, Mark-M.:
Modelling parallel SiC MOSFETs : thermal selfstabilisation vs. switching imbalances.
In: IET Power Electronics. Vol. 12 (2019) Issue 5 . - pp. 1071-1078.
DOI: https://doi.org/10.1049/iet-pel.2018.5418

Grünewald, Jonas ; Orth, Tilman ; Parlevliet, Patricia ; Altstädt, Volker:
Modified foam cores for full thermoplastic composite sandwich structures.
In: Journal of Sandwich Structures and Materials. Vol. 21 (2019) Issue 3 . - pp. 1150-1166.
DOI: https://doi.org/10.1177/1099636217708741

Ciocoveanu, Radu ; Weigel, Robert ; Hagelauer, Amelie ; Issakov, Vadim:
Modified Gilbert-Cell Mixer with an LO Waveform Shaper and Switched Gate-Biasing for 1/f Noise Reduction in 28-nm CMOS.
In: IEEE Transactions on Circuits and Systems II : Express Briefs. Vol. 66 (2019) Issue 10 . - pp. 1688-1692.
DOI: https://doi.org/10.1109/TCSII.2019.2923595

Gomes, Bruna Ferreira ; Lobo, Carlos Manuel Silva ; Colnago, Luiz Alberto:
Monitoring Electrochemical Reactions in Situ with Low Field NMR : A Mini-Review.
In: Applied Sciences. Vol. 9 (2019) Issue 3 . - p. 498.
DOI: https://doi.org/10.3390/app9030498

Aksit, Merve ; Klose, Bastian ; Zhao, C. ; Kreger, Klaus ; Schmidt, Hans-Werner ; Altstädt, Volker:
Morphology control of extruded polystyrene foams with benzene-trisamide-based nucleating agents.
In: Journal of Cellular Plastics. Vol. 55 (2019) Issue 3 . - pp. 249-261.
DOI: https://doi.org/10.1177/0021955X19837508

Molina, Anton ; Scheibel, Thomas ; Humenik, Martin:
Nanoscale patterning of surface via DNA directed spider silk assembly.
In: Biomacromolecules. Vol. 20 (2019) Issue 1 . - pp. 347-352.
DOI: https://doi.org/10.1021/acs.biomac.8b01333

Puchas, Georg ; Held, Alexander ; Krenkel, Walter:
Near-net shape manufacture process for oxide fiber composites (OFC).
In: Materials Today : Proceedings. Vol. 16 (2019) Issue 1 . - pp. 49-58.
DOI: https://doi.org/10.1016/j.matpr.2019.05.278

Volltext
Spatz, Carolin ; Puchas, Georg ; Langhof, Nico ; Krenkel, Walter:
Neuartige Preformen aus hochsteifen technischen Fasern für Verbundkeramiken.
In: Werkstoffe in der Fertigung. (2019) Issue 3 . - pp. 20-23.

Kleinschrodt, Claudia ; Rieg, Frank:
Normalisation of STEP Files for Improving the Data Compatibility of Transferred Tool Models.
In: Tehnički vjesnik = Technical Gazette. Vol. 26 (2019) Issue 1 . - pp. 248-255.
DOI: https://doi.org/10.17559/TV-20170911135242

Volltext
Heimerdinger, Patrick ; Rosin, Andreas ; Danzer, Michael A. ; Gerdes, Thorsten:
A Novel Method for Humidity-Dependent Through-Plane Impedance Measurement for Proton Conducting Polymer Membranes.
In: Membranes. Vol. 9 (2019) Issue 5 . - No. 62.
DOI: https://doi.org/10.3390/membranes9050062

Volltext
Schubert, Michaela ; Münch, Christian ; Schuurman, Sophie ; Poulain, Veronique ; Kita, Jaroslaw ; Moos, Ralf:
Novel Method for NTC Thermistor Production by Aerosol Co-Deposition and Combined Sintering.
In: Sensors. Vol. 19 (2019) Issue 7 . - No. 1632.
DOI: https://doi.org/10.3390/s19071632

Volltext

Volltext
Walter, Stefanie ; Bogner, Andreas ; Hagen, Gunter ; Moos, Ralf:
Novel radio-frequency-based gas sensor with integrated heater.
Universität Bayreuth / Lehrstuhl für Funktionsmaterialien
In: Journal of Sensors and Sensor Systems. Vol. 8 (2019) . - pp. 49-56.
DOI: 10.5194/jsss-8-49-2019

Volltext
Ritter, Thomas ; Lattus, Julia ; Hagen, Gunter ; Moos, Ralf:
On the influence of the NO x equilibrium reaction on mixed potential sensor signals : a comparison between FE modelling and experimental data.
In: Sensors and Actuators B: Chemical. Vol. 296 (2019) . - No. 126627.
DOI: https://doi.org/10.1016/j.snb.2019.126627

Volltext
Anke, Marie-Luise ; Hämmerle, Martin ; Moos, Ralf ; Jess, Andreas:
Operando Determination of the Thermal Decomposition of Supported Ionic Liquids by a Radio-Frequency-Based Method.
In: ACS Omega. Vol. 4 (2019) Issue 2 . - pp. 3351-3360.
DOI: https://doi.org/10.1021/acsomega.8b02421

Paulisch, Melanie Cornelia ; Gebhard, Marcus ; Franzen, David ; Hilger, André ; Osenberg, Markus ; Kardjilov, Nikolay ; Ellendorff, Barbara ; Turek, Thomas ; Roth, Christina ; Manke, Ingo:
Operando Laboratory X-Ray Imaging of Silver-Based Gas Diffusion Electrodes during Oxygen Reduction Reaction in Highly Alkaline Media.
In: Materials. Vol. 12 (2019) Issue 17 . - No. 2686.
DOI: https://doi.org/10.3390/ma12172686

Volltext
Scharfe, Benedikt ; Lehmann, Sebastian ; Gerdes, Thorsten ; Brüggemann, Dieter:
Optical and Mechanical Properties of Highly Transparent Glass-Flake Composites.
In: Journal of Composites Science. Vol. 3 (2019) Issue 4 . - No. 101.
DOI: https://doi.org/10.3390/jcs3040101

Volltext
Hahn, Markus ; Schindler, Stefan ; Triebs, Lisa-Charlotte ; Danzer, Michael A.:
Optimized Process Parameters for a Reproducible Distribution of Relaxation Times Analysis of Electrochemical Systems.
In: Batteries. Vol. 5 (2019) Issue 2 . - No. 43.
DOI: https://doi.org/10.3390/batteries5020043

Volltext
Faden, Moritz ; König-Haagen, Andreas ; Brüggemann, Dieter:
An Optimum Enthalpy Approach for Melting and Solidification with Volume Change.
In: Energies. Vol. 12 (2019) Issue 5 . - No. 868.
DOI: https://doi.org/10.3390/en12050868

Delikaya, Öznur ; Zeyat, Mohammad ; Lentz, Dieter ; Roth, Christina:
Organic Additives to Improve Catalyst Performance for High‐Temperature Polymer Electrolyte Membrane Fuel Cells.
In: ChemElectroChem. Vol. 6 (2019) Issue 15 . - pp. 3892-3900.
DOI: https://doi.org/10.1002/celc.201900251

Wolff, Nadja ; Langhof, Nico ; Krenkel, Walter:
Oxidation Behavior of Alumina Fiber Reinforced SiCO Composites for a Co-Firing Process on Steel Pipes.
In: Advanced Engineering Materials. Vol. 21 (2019) Issue 6 . - No. 1900233.
DOI: https://doi.org/10.1002/adem.201900233

Steiner, Carsten ; Gänzler, Andreas ; Zehentbauer, Melanie ; Hagen, Gunter ; Casapu, Maria ; Müller, Sabrina ; Grunwaldt, Jan-Dierk ; Moos, Ralf:
Oxidation State and Dielectric Properties of Ceria-Based Catalysts by Complementary Microwave Cavity Perturbation and X-Ray Absorption Spectroscopy Measurements.
In: Topics in Catalysis. Vol. 62 (2019) Issue 1-4 . - pp. 227-236.
DOI: https://doi.org/10.1007/s11244-018-1110-3

Schubert, Michael ; Leupold, Nico ; Kita, Jaroslaw ; Moos, Ralf:
Oxygen partial pressure dependency of the electrical conductivity of aerosol deposited alumina films between 650 °C and 900 °C.
In: Materials Letters. Vol. 245 (2019) . - pp. 208-210.
DOI: https://doi.org/10.1016/j.matlet.2019.02.094

Holzinger, Markus ; Schleifer, Felix ; Glatzel, Uwe ; Fleck, Michael:
Phase-field modeling of γ'-precipitate shapes in nickel-base superalloys and their classification by moment invariants.
In: The European Physical Journal B. Vol. 92 (2019) . - No. 208.
DOI: https://doi.org/10.1140/epjb/e2019-100256-1

Heinrich, Marco ; Wolff, Nicolas ; Harting, Nina ; Laue, Vincent ; Röder, Fridolin ; Seitz, Steffen ; Krewer, Ulrike:
Physico‐Chemical Modeling of a Lithium‐Ion Battery : An Ageing Study with Electrochemical Impedance Spectroscopy.
In: Batteries & Supercaps. Vol. 2 (2019) Issue 6 . - pp. 530-540.
DOI: https://doi.org/10.1002/batt.201900011

El-Nagar, Gumaa A. ; Delikaya, Öznur ; Lauermann, Iver ; Roth, Christina:
Platinum Nanostructure Tailoring for Fuel Cell Applications Using Levitated Water Droplets as Green Chemical Reactors.
In: ACS Applied Materials & Interfaces. Vol. 11 (2019) Issue 25 . - pp. 22398-22407.
DOI: https://doi.org/10.1021/acsami.9b05156

Esmaeili, Mohsen ; Pircheraghi, Gholamreza ; Bagheri, Amir Reza ; Altstädt, Volker:
Poly(lactic acid)/coplasticized thermoplastic starch blend : Effect of plasticizer migration on rheological and mechanical properties.
In: Polymers for Advanced Technologies. Vol. 30 (2019) Issue 4 . - pp. 839-851.
DOI: https://doi.org/10.1002/pat.4517

Schnucklake, Maike ; Eifert, László ; Schneider, Jonathan ; Zeis, Roswitha ; Roth, Christina:
Porous N- and S-doped carbon–carbon composite electrodes by soft-templating for redox flow batteries.
In: Beilstein Journal of Nanotechnology. Vol. 10 (2019) . - pp. 1131-1139.
DOI: https://doi.org/10.3762/bjnano.10.113

Schubert, Michaela ; Hanft, Dominik ; Nazarenus, Tobias ; Exner, Jörg ; Schubert, Michael ; Nieke, Philipp ; Glosse, Philipp ; Leupold, Nico ; Kita, Jaroslaw ; Moos, Ralf:
Powder aerosol deposition method : novel applications in the field of sensing and energy technology.
In: Functional Materials Letters. Vol. 12 (2019) Issue 5 . - No. 1930005.
DOI: https://doi.org/10.1142/S1793604719300056

Bauer, Michaela ; Mühlbauer, Markus ; Bohlen, Oliver ; Danzer, Michael A. ; Lygeros, John:
Power flow in heterogeneous battery systems.
In: Journal of Energy Storage. Vol. 25 (2019) . - No. 100816.
DOI: https://doi.org/10.1016/j.est.2019.100816

Walter, Stefanie ; Ruwisch, Lutz ; Göbel, Ulrich ; Hagen, Gunter ; Moos, Ralf:
Radio Frequency-Based Determination of the Oxygen and the NOₓ Storage Level of NOₓ Storage Catalysts.
In: Topics in Catalysis. Vol. 62 (2019) Issue 1-4 . - pp. 157-163.
DOI: https://doi.org/10.1007/s11244-018-1079-y

Cimprich, Alexander ; Bach, Vanessa ; Helbig, Christoph ; Thorenz, Andrea ; Schrijvers, Dieuwertje ; Sonnemann, Guido ; Young, Steven B. ; Sonderegger, Thomas ; Berger, Markus:
Raw material criticality assessment as a complement to environmental life cycle assessment : Examining methods for product‐level supply risk assessment.
In: Journal of Industrial Ecology. Vol. 23 (2019) Issue 5 . - pp. 1226-1236.
DOI: https://doi.org/10.1111/jiec.12865

Volltext
Schötz, Sebastian ; Rosemann, Bernd ; Reiser, Sophia Elisabeth:
Relevant data when implementing tools of quality in cyber-physical systems.
In: Proceedings in Manufacturing Systems. Vol. 14 (2019) Issue 2 . - pp. 43-48.

Volltext
Faden, Moritz ; Höhlein, Stephan ; Wanner, Joschka ; König-Haagen, Andreas ; Brüggemann, Dieter:
Review of Thermophysical Property Data of Octadecane for Phase-Change Studies.
In: Materials. Vol. 12 (2019) Issue 18 . - No. 2974.
DOI: https://doi.org/10.3390/ma12182974

Silva Cortes, Victor ; Nowak, Jacek ; Chauhan, Vikrant ; Stehr, Uwe ; Hein, Matthias A. ; Fischer, Georg ; Hagelauer, Amelie:
RF MEMS Modules : A Multiphysical design methodology based on system performance requirements.
In: IEEE Microwave Magazine. Vol. 20 (2019) Issue 10 . - pp. 44-55.
DOI: https://doi.org/10.1109/MMM.2019.2928676

Jérôme, Valérie ; Freitag, Ruth ; Schüler, Dirk ; Mickoleit, Frank:
SEAP activity measurement in reporter cell-based assays using BCIP / NBT as substrate.
In: Analytical Biochemistry. Vol. 585 (2019) . - No. 113402.
DOI: https://doi.org/10.1016/j.ab.2019.113402

Ruchets, Anastasiya ; Donker, Nils ; Schönauer-Kamin, Daniela ; Moos, Ralf ; Zosel, Jens ; Guth, Ulrich ; Mertig, Michael:
Selectivity improvement towards hydrogen and oxygen of solid electrolyte sensors by dynamic electrochemical methods.
In: Sensors and Actuators B: Chemical. Vol. 290 (2019) . - pp. 53-58.
DOI: https://doi.org/10.1016/j.snb.2019.03.063

Aigner, Tamara B. ; Scheibel, Thomas:
Self-Rolling Refillable Tubular Enzyme Containers Made ofRecombinant Spider Silk and Chitosan.
In: ACS Applied Materials & Interfaces. Vol. 11 (2019) Issue 17 . - pp. 15290-15297.
DOI: https://doi.org/10.1021/acsami.9b01654

Kirillova, Alina ; Ionov, Leonid:
Shape-changing polymers for biomedical applications.
In: Journal of Materials Chemistry B. Vol. 7 (2019) Issue 10 . - pp. 1597-1624.
DOI: https://doi.org/10.1039/C8TB02579G

Stehr, Uwe ; Hagelauer, Amelie ; Hein, Matthias A.:
SiCer : Meeting the Challenges of Tomorrow's Complex Electronic Systems [From the Guest Editors' Desk].
In: IEEE Microwave Magazine. Vol. 20 (2019) Issue 10 . - pp. 26-92.
DOI: https://doi.org/10.1109/MMM.2019.2928614

Sarhan, Radwan M. ; El-Nagar, Gumaa A. ; Abouserie, Ahed ; Roth, Christina:
Silver–Iron Hierarchical Microflowers for Highly Efficient H₂O₂ Nonenzymatic Amperometric Detection.
In: ACS Sustainable Chemistry & Engineering. Vol. 7 (2019) Issue 4 . - pp. 4335-4342.
DOI: https://doi.org/10.1021/acssuschemeng.8b06182

Ritter, Thomas ; Seibel, Maximilian ; Hofmann, Frank ; Weibel, Michel ; Moos, Ralf:
Simulation of a NOₓ Sensor for Model-Based Control of Exhaust Aftertreatment Systems.
In: Topics in Catalysis. Vol. 62 (2019) Issue 1-4 . - pp. 150-156.
DOI: https://doi.org/10.1007/s11244-018-1102-3

Volltext
Brüggemann, Dieter ; Heberle, Florian ; Kuboth, Sebastian:
Smart Homes : Wärme und Strom für unser künftiges Wohnen.
In: Spektrum. Vol. 15 (2019) Issue 1 . - pp. 48-53.

Schadeck, Ulrich ; Hahn, Markus ; Gerdes, Thorsten ; Krenkel, Walter ; Danzer, Michael A. ; Moos, Ralf:
Sodium Borosilicate Glass Separators as an Electrolyte Additive Donor for Improving the Electrochemical Performance of Lithium-Ion Batteries.
In: Journal of the Electrochemical Society. Vol. 166 (2019) Issue 14 . - A3416-A3424.
DOI: https://doi.org/10.1149/2.1011914jes

Rößler, Stefan ; Kern, Christoph ; Jess, Andreas:
Sorption and condensation of higher hydrocarbons in a Fischer–Tropsch catalyst.
In: Catalysis Science & Technology. Vol. 9 (2019) Issue 8 . - pp. 1902-1910.
DOI: https://doi.org/10.1039/C8CY02551G

Herold, Heike ; Aigner, Tamara B. ; Grill, Carolin ; Krüger, Stefanie ; Taubert, Andreas ; Scheibel, Thomas:
SpiderMAEn : recombinant spider silk-basedhybrid materials for advanced energy technology.
In: Bioinspired, Biomimetic and Nanobiomaterials. Vol. 8 (2019) Issue 1 . - pp. 99-108.
DOI: https://doi.org/10.1680/jbibn.18.00007

Harting, Nina ; Wolff, Nicolas ; Röder, Fridolin ; Krewer, Ulrike:
State-of-Health Diagnosis of Lithium-Ion Batteries Using Nonlinear Frequency Response Analysis.
In: Journal of the Electrochemical Society. Vol. 166 (2019) Issue 2 . - S. A277-A285.
DOI: https://doi.org/10.1149/2.1031902jes

Müller, Verena ; Scurtu, Rares-George ; Memm, Michaela ; Danzer, Michael A. ; Wohlfahrt-Mehrens, Margret:
Study of the influence of mechanical pressure on the performance and aging of Lithium-ion battery cells.
In: Journal of Power Sources. Vol. 440 (2019) . - Art.Nr. 227148.
DOI: https://doi.org/10.1016/j.jpowsour.2019.227148

Gomes, Bruna Ferreira ; Holzhäuser, Fabian Joschka ; Silva Lobo, Carlos Manuel ; da Silva, Pollyana Ferreira ; Danieli, Ernesto ; Carmo, Marcelo ; Colnago, Luiz Alberto ; Palkovits, Stefan ; Palkovits, Regina ; Blümich, Bernhard:
Sustainable Electrocoupling of the Biogenic Valeric Acid under in Situ Low-Field Nuclear Magnetic Resonance Conditions.
In: ACS Sustainable Chemistry & Engineering. Vol. 7 (2019) Issue 22 . - pp. 18288-18296.
DOI: https://doi.org/10.1021/acssuschemeng.9b02768

Rosenbach, Dominic ; Mödl, Nicolas ; Hahn, Markus ; Petry, Jannik ; Danzer, Michael A. ; Thelakkat, Mukundan:
Synthesis and Comparative Studies of Solvent-Free Brush Polymer Electrolytes for Lithium Batteries.
In: ACS Applied Energy Materials. Vol. 2 (2019) Issue 5 . - pp. 3373-3388.
DOI: https://doi.org/10.1021/acsaem.9b00211

El-Nagar, Gumaa A. ; Muench, Falk ; Roth, Christina:
Tailored dendritic platinum nanostructures as a robust and efficient direct formic acid fuel cell anode.
In: New Journal of Chemistry. Vol. 43 (2019) Issue 10 . - pp. 4100-4105.
DOI: https://doi.org/10.1039/c8nj06172f

Tichter, Tim ; Andrae, Dirk ; Mayer, Jacob ; Schneider, Jonathan ; Gebhard, Marcus ; Roth, Christina:
Theory of cyclic voltammetry in random arrays of cylindrical microelectrodes applied to carbon felt electrodes for vanadium redox flow batteries.
In: Physical Chemistry Chemical Physics. Vol. 21 (2019) Issue 18 . - pp. 9061-9068.
DOI: https://doi.org/10.1039/C9CP00548J

Volltext
Pawelski-Höll, Christin ; Bhagwat, Sagar ; Altstädt, Volker:
Thermal, fire, and mechanical properties of solvent-free processed BN/boehmite-filled prepregs.
In: Polymer Engineering and Science. Vol. 59 (2019) Issue 9 . - pp. 1840-1852.
DOI: https://doi.org/10.15495/EPub_UBT_00005010

Volltext
Tauer, Georg ; Kern, Christoph ; Jess, Andreas:
Transient Effects during Dynamic Operation of a Wall‐Cooled Fixed‐Bed Reactor for CO₂ Methanation.
In: Chemical Engineering & Technology. Vol. 42 (2019) Issue 11 . - pp. 2401-2409.
DOI: https://doi.org/10.1002/ceat.201900367

Volltext
Eller, Tim ; Heberle, Florian ; Brüggemann, Dieter:
Transient Simulation of Geothermal Combined Heat and Power Generation for a Resilient Energetic and Economic Evaluation.
In: Energies. Vol. 12 (2019) Issue 5 . - No. 894.
DOI: https://doi.org/10.3390/en12050894

Volltext
Bubmann, Tobias ; Seidel, Andreas ; Altstädt, Volker:
Transparent PC/PMMA Blends Via Reactive Compatibilization in a Twin-Screw Extruder.
In: Polymers. Vol. 11 (2019) Issue 12 . - No. 2070.
DOI: https://doi.org/10.3390/polym11122070

Bard, Simon ; Demleitner, Martin ; Radtke, Marius ; Altstädt, Volker:
Transverse Thermal Conductivity of Epoxy Carbon Fiber Prepreg Laminates with a Graphite Filled Matrix.
In: Journal of Composites Science. Vol. 3 (2019) Issue 2 . - No. 44.
DOI: https://doi.org/10.3390/jcs3020044

Borkner, Christian B. ; Lentz, Sarah ; Müller, Martin ; Fery, Andreas ; Scheibel, Thomas:
Ultrathin Spider Silk Films : Insights into Spider Silk Assembly on Surfaces.
In: ACS Applied Polymer Materials. Vol. 1 (2019) Issue 12 . - pp. 3366-3374.
DOI: https://doi.org/10.1021/acsapm.9b00792

Wolff, Nicolas ; Harting, Nina ; Röder, Fridolin ; Heinrich, Marco ; Krewer, Ulrike:
Understanding nonlinearity in electrochemical systems.
In: The European Physical Journal Special Topics. Vol. 227 (2019) Issue 18 . - pp. 2617-2640.
DOI: https://doi.org/10.1140/epjst/e2019-800135-2

Zha, R. Helen ; Delparastan, Peyman ; Fink, Tanner D. ; Bauer, Joschka ; Scheibel, Thomas ; Messersmith, Phillip B.:
Universal nanothin silk coatings via controlled spidroin self-assembly.
In: Biomaterials Science. Vol. 7 (2019) Issue 2 . - pp. 683-695.
DOI: https://doi.org/10.1039/C8BM01186A

Scholzen, Philipp ; Billenstein, Daniel ; Hammerl, Georg ; Löpenhaus, Christoph ; Glenk, Christian ; Brecher, Christian ; Rieg, Frank:
Untersuchung des Einflusses von Radkörperstrukturen auf das Einsatzverhalten von Zahnrädern.
In: Forschung im Ingenieurwesen. Vol. 83 (2019) Issue 3 . - pp. 435-444.
DOI: https://doi.org/10.1007/s10010-019-00363-4

Kröner, Julia ; Tremmel, Stephan ; Wartzack, Sandro:
Untersuchungen an a-C:H:Me-beschichteten Rillenkugellagern unter Trockenlaufbedingungen.
In: Tribologie und Schmierungstechnik. Vol. 66 (2019) Issue 6 . - pp. 33-39.
DOI: https://doi.org/10.30419/TuS-2019-0030

Tremmel, Stephan:
Welche Bedeutung haben die Maschinenelemente (noch) im Internet der Dinge?
In: Konstruktion. Vol. 71 (2019) Issue 7-8 . - p. 3.

Fischerauer, Gerhard:
Universität Bayreuth : Lehrstuhl für Mess- und Regeltechnik.
In: Jahresmagazin Mess- und Sensortechnik. Vol. 2018/2019 (December 2018) . - pp. 106-111.

Golser, Adrian V. ; Röber, Matthias ; Börner, Hans G. ; Scheibel, Thomas:
Engineered Collagen : A Redox Switchable Framework for Tunable Assembly and Fabrication of Biocompatible Surfaces.
In: ACS Biomaterials Science & Engineering. Vol. 4 (7 November 2018) Issue 6 . - pp. 2106-2114.
DOI: https://doi.org/10.1021/acsbiomaterials.7b00583

Marian, Max ; Tremmel, Stephan ; Wartzack, Sandro:
Microtextured surfaces in higher loaded rolling-sliding EHL line-contacts.
In: Tribology International. Vol. 127 (November 2018) . - pp. 420-432.
DOI: https://doi.org/10.1016/j.triboint.2018.06.024

Delgado, Mónica ; Lázaro, Ana ; Biedenbach, Michael ; Gamisch, Sebastian ; Gschwander, Stefan ; Höhlein, Stephan ; König-Haagen, Andreas ; Brüggemann, Dieter:
Intercomparative tests on viscosity measurements of phase change materials.
In: Thermochimica Acta. Vol. 668 (10 October 2018) . - pp. 159-168.
DOI: https://doi.org/10.1016/j.tca.2018.08.017

Stöcker, Thomas ; Moos, Ralf:
Effect of Oxygen Partial Pressure on the Phase Stability of Copper-Iron Delafossites at Elevated Temperatures.
In: Materials. Vol. 11 (October 2018) Issue 10 . - No. 1888.
DOI: https://doi.org/10.3390/ma11101888

Schindler, Stefan ; Bauer, Marius ; Cheetamun, Hansley ; Danzer, Michael A.:
Fast charging of lithium-ion cells : Identification of aging-minimal current profiles using a design of experiment approach and a mechanistic degradation analysis.
In: Journal of Energy Storage. Vol. 19 (October 2018) . - pp. 364-378.
DOI: https://doi.org/10.1016/j.est.2018.08.002

Balzereit, Sandra ; Proes, Friedrich ; Altstädt, Volker ; Emmelmann, Claus:
Properties of copper modified polyamide 12-powders and their potential for the use as laser direct structurable electronic circuit carriers.
In: Additive Manufacturing. Vol. 23 (October 2018) . - pp. 347-354.
DOI: https://doi.org/10.1016/j.addma.2018.08.016

Volltext
Thorenz, Benjamin ; Westermann, Hans-Henrik ; Kafara, Markus ; Nützel, Marina ; Steinhilper, Rolf:
Evaluation of the influence of different clamping chuck types on energy consumption, tool wear and surface qualities in milling operations.
In: Procedia Manufacturing. Vol. 21 (26 September 2018) . - pp. 575-582.
DOI: https://doi.org/10.1016/j.promfg.2018.02.158

Zöllner, Christian ; Brüggemann, Dieter:
Studies on the Influence of Engine Conditions and Different Ash Levels on the Regeneration Behavior of Particulate Filters.
In: SAE Technical Paper. (10 September 2018) . - No. 2018-01-1704.
DOI: https://doi.org/10.4271/2018-01-1704

Fleck, Michael ; Schleifer, Felix ; Holzinger, Markus ; Glatzel, Uwe:
Phase-Field Modeling of Precipitation Growth and Ripening During Industrial Heat Treatments in Ni-Base Superalloys.
In: Metallurgical and Materials Transactions A. Vol. 49 (September 2018) Issue 9 . - pp. 4146-4157.
DOI: https://doi.org/10.1007/s11661-018-4746-5

Kayarkatte, Manoj Krishna ; Delikaya, Öznur ; Roth, Christina:
Polyacrylic acid-Nafion composites as stable catalyst support in PEM fuel cell electrodes.
In: Materials Today : Communications. Vol. 16 (September 2018) . - pp. 8-13.
DOI: https://doi.org/10.1016/j.mtcomm.2018.02.003

Melke, Julia ; Dixon, Ditty ; Riekehr, Lars ; Benker, Nathalie ; Langner, Joachim ; Lentz, Claudia ; Sezen, Hikmet ; Nefedov, Alexei ; Wöll, Christof ; Ehrenberg, Helmut ; Roth, Christina:
Surfactant modified platinum based fuel cell cathode studied by X-ray absorption spectroscopy.
In: Journal of Catalysis. Vol. 364 (August 2018) . - pp. 282-290.
DOI: https://doi.org/10.1016/j.jcat.2018.05.024

Klein, Melanie ; Finsterwald, Leonhard ; Tonhäuser, Kathrin ; Steinhilper, Rolf:
Measurement Analysis for Increasing Resource Efficiency during Autoclave Processes for the Production of Fiber Composites.
In: Applied Mechanics and Materials. Vol. 882 (July 2018) . - pp. 154-161.
DOI: https://doi.org/10.4028/www.scientific.net/AMM.882.154

Tirunilai, Aditya Srinivasan ; Sas, Jan ; Weiss, Klaus-Peter ; Chen, Hans ; Vinga Szabó, Dorothée ; Schlabach, Sabine ; Haas, Sebastian ; Geissler, David ; Freudenberger, Jens ; Heilmaier, Martin ; Kauffmann, Alexander:
Peculiarities of deformation of CoCrFeMnNi at cryogenic temperatures.
In: Journal of Materials Research. (July 2018) .
DOI: https://doi.org/10.1557/jmr.2018.252

Volltext
Rosemann, Bernd:
Oberflächenfeinbearbeitung auf CNC-Bearbeitungszentren.
VDI Verein Deutscher Ingenieure
In: wt Werkstattstechnik online. (June 2018) . - pp. 454-459.

Volltext
Viebahn, Felix ; Glamsch, Johannes ; Rieg, Frank:
Untersuchung der Einflussfaktoren auf die Wälzlagersteifigkeit.
In: Konstruktion. Vol. 70 (June 2018) Issue 6 . - S. 77-81 + 91.

Hofmann, Eddie ; Krüger, Kilian ; Haynl, Christian ; Scheibel, Thomas ; Trebbin, Martin ; Förster, Stephan:
Microfluidic nozzle device for ultrafine fibersolution blow spinning with precise diametercontrol.
In: Lab on a Chip. Vol. 18 (31 May 2018) Issue 15 . - pp. 2225-2234.
DOI: https://doi.org/10.1039/c8lc00304a

Isakin, Olga ; Hiltl, Stephanie ; Schneider, Ralph ; Bleisteiner, Jasmin ; Struck, Oliver ; Schindler, Kerstin ; Willert-Porada, Monika ; Moos, Ralf:
Ultrasound-assisted one-pot syntheses of ZnO nanoparticles that are homogeneously adsorbed on exfoliated graphite and a simplified method to determine the graphite layer thickness in such composites.
In: Journal of Materials Science. Vol. 53 (May 2018) Issue 9 . - pp. 6586-6601.
DOI: https://doi.org/10.1007/s10853-018-2023-z

Golser, Adrian V. ; Scheibel, Thomas:
Routes towards Novel Collagen-Like Biomaterials.
In: Fibers. Vol. 6 (3 April 2018) Issue 2 . - No. 21.
DOI: https://doi.org/10.3390/fib6020021

Peter, Ronny ; Fischerauer, Gerhard:
De-Embedding Method for Strongly Coupled Cavities.
In: IEEE Transactions on Microwave Theory and Techniques. Vol. 66 (April 2018) Issue 4 . - pp. 2025-2033.
DOI: https://doi.org/10.1109/TMTT.2018.2791934

Akram, Muhammad Yasir ; Ferraris, Monica ; Casalegno, Valentina ; Salvo, Milena ; Puchas, Georg ; Knohl, Stefan ; Krenkel, Walter:
Joining and testing of alumina fibre reinforced YAG-ZrO₂ matrix composites.
In: Journal of the European Ceramic Society. Vol. 38 (April 2018) Issue 4 . - pp. 1802-1811.
DOI: https://doi.org/10.1016/j.jeurceramsoc.2017.11.026

Fetyan, Abdulmonem ; El-Nagar, Gumaa A. ; Derr, Igor ; Kubella, Paul ; Dau, Holger ; Roth, Christina:
A neodymium oxide nanoparticle-doped carbon felt as promising electrode for vanadium redox flow batteries.
In: Electrochimica Acta. Vol. 268 (April 2018) . - pp. 59-65.
DOI: https://doi.org/10.1016/j.electacta.2018.02.104

Volltext
Schadeck, Ulrich ; Kyrgyzbaev, Kanat ; Gerdes, Thorsten ; Willert-Porada, Monika ; Moos, Ralf:
Porous and non-porous micrometer-sized glass platelets as separators for lithium-ion batteries.
In: Journal of Membrane Science. Vol. 550 (15 March 2018) . - pp. 518-525.
DOI: https://doi.org/10.1016/j.memsci.2017.10.061

Volltext
Bektas, Murat ; Stöcker, Thomas ; Hagen, Gunter ; Moos, Ralf:
On the defect chemistry of BaFe0.89Al0.01Ta0.1O3-δ, a material for temperature independent resistive and thermoelectric oxygen sensors.
In: Solid State Ionics. Vol. 316 (March 2018) . - pp. 1-8.
DOI: https://doi.org/10.1016/j.ssi.2017.12.017

Volltext
Zheng, Yingjing ; Sauter, Ulrich ; Moos, Ralf:
Oxygen transport paths in screen-printed Pt-Al2O3 composite model electrodes on YSZ.
In: Solid State Ionics. Vol. 316 (March 2018) . - pp. 53-58.
DOI: https://doi.org/10.1016/j.ssi.2017.12.026

Volltext
Salehi, Sahar ; Scheibel, Thomas:
Biomimetic spider silk fibres : from vision to reality.
In: The Biochemist. Vol. 40 (February 2018) Issue 1 . - pp. 4-7.

Jüttner, Michael ; Hasse, Alexander ; Tremmel, Stephan:
Flexure pitch bearing concept for individual pitch control of wind turbines.
In: Wind Energy. Vol. 21 (February 2018) Issue 2 . - pp. 129-138.
DOI: https://doi.org/10.1002/we.2149

Faden, Moritz ; König-Haagen, Andreas ; Höhlein, Stephan ; Brüggemann, Dieter:
An implicit algorithm for melting and settling of phase change material inside macrocapsules.
In: International Journal of Heat and Mass Transfer. Vol. 117 (February 2018) . - pp. 757-767.
DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2017.10.033

Volltext
Hagen, Gunter ; Harsch, Antonia ; Moos, Ralf:
A pathway to eliminate the gas flow dependency of a hydrocarbon sensor for automotive exhaust applications.
In: Journal of Sensors and Sensor Systems. Vol. 7 (February 2018) . - pp. 79-84.
DOI: https://doi.org/10.5194/jsss-7-79-2018

Dietz, Marco ; Bauch, Andreas ; Aufinger, Klaus ; Weigel, Robert ; Hagelauer, Amelie:
A 1 to 32 GHz broadband multi-octave receiver for monolithic integrated vector network analyzers in SiGe technology.
In: International Journal of Microwave and Wireless Technologies. Vol. 10 (2018) Issue 5-6 . - pp. 717-728.
DOI: https://doi.org/10.1017/S175907871800079X

Stroganov, Vladislav ; Pant, Jitendra ; Stoychev, Georgi ; Janke, Andreas ; Jehnichen, Dieter ; Fery, Andreas ; Handa, Hitesh ; Ionov, Leonid:
4D Biofabrication : 3D Cell Patterning Using Shape-Changing Films.
In: Advanced Functional Materials. Vol. 28 (2018) . - No. 1706248.
DOI: https://doi.org/10.1002/adfm.201706248

Ionov, Leonid:
4D Biofabrication : Materials, Methods, and Applications.
In: Advanced Healthcare Materials. Vol. 7 (2018) Issue 17 . - No. 1800412.
DOI: https://doi.org/10.1002/adhm.201800412

Bachtin, Krystyna ; Kramer, Dominik ; Chakravadhanula, V. S. Kiran ; Mu, Xiaoke ; Trouillet, Vanessa ; Kaus, Maximilian ; Indris, Sylvio ; Ehrenberg, Helmut ; Roth, Christina:
Activation and degradation of electrospun LiFePO₄ battery cathodes.
In: Journal of Power Sources. Vol. 396 (2018) . - pp. 386-394.
DOI: https://doi.org/10.1016/j.jpowsour.2018.06.051

Cestari, Sibele P. ; Albitres, Gerson Alberto Valencia ; Mendes, Luis C. ; Altstädt, Volker ; Gabriel, Jair Braga ; Avila, Gabriel Carvalho Bertassone ; dos Santos Silveira, Ivan de Sousa:
Advanced properties of composites of recycled high-density polyethylene and microfibers of sugarcane bagasse.
In: Journal of Composite Materials (JCM). Vol. 52 (2018) Issue 7 . - pp. 867-876.
DOI: https://doi.org/10.1177/0021998317716268

Hanft, Dominik ; Glosse, Philipp ; Denneler, Stefan ; Berthold, Thomas ; Oomen, Marijn ; Kauffmann-Weiss, Sandra ; Weis, Frederik ; Häßler, Wolfgang ; Holzapfel, Bernhard ; Moos, Ralf:
The Aerosol Deposition Method : A Modified Aerosol Generation Unit to Improve Coating Quality.
In: Materials. Vol. 11 (2018) Issue 9 . - Art.Nr. 1572.
DOI: https://doi.org/10.3390/ma11091572

Lintz, Eileen S. ; Neinhuis, Christoph ; Scheibel, Thomas:
Altering Silk Film Surface Properties through Lotus-Like Mechanisms.
In: Macromolecular Materials and Engineering. Vol. 303 (2018) Issue 4 . - p. 1700637.
DOI: https://doi.org/10.1002/mame.201700637

Exner, Jörg ; Pöpke, Hendrik ; Fuchs, Franz-Martin ; Kita, Jaroslaw ; Moos, Ralf:
Annealing of Gadolinium-Doped Ceria (GDC) Films Produced by the Aerosol Deposition Method.
In: Materials. Vol. 11 (2018) Issue 11 . - No. 2072.
DOI: https://doi.org/10.3390/ma11112072

Helmlinger, Lars ; Zhu, Yejun ; Gensel, Julia ; Neumeyer, Thomas ; Thäter, Stefan ; Strube, Franziska ; Bauer, Christoph ; Rosemann, Bernd ; Altstädt, Volker:
Application of Amine-Functionalized Cellulose Foam for CO2 Capture and Storage in the Brewing Industry.
In: Journal of Renewable Materials. Vol. 6 (2018) Issue 3 . - pp. 219-225.
DOI: https://doi.org/10.7569/JRM.2017.634161

Cheng, Chong ; Li, Shuang ; Xia, Yi ; Ma, Lang ; Nie, Chuanxiong ; Roth, Christina ; Thomas, Arne ; Haag, Rainer:
Atomic Fe-Nₓ Coupled Open-Mesoporous Carbon Nanofibers for Efficient and Bioadaptable Oxygen Electrode in Mg-Air Batteries.
In: Advanced Materials. Vol. 30 (2018) Issue 40 . - No. 1802669.
DOI: https://doi.org/10.1002/adma.201802669

Billenstein, Daniel ; Dinkel, Christian ; Rieg, Frank:
Automated topological clustering of design proposals in structural optimisation.
In: International Journal of Simulation Modelling. Vol. 17 (2018) Issue 4 . - pp. 657-666.

Volltext
Deese, Kevin ; Glamsch, Johannes ; Rieg, Frank:
Automatisierung der Strukturoptimierung für eine einfache und fehlerfreie Prozesskette.
In: NAFEMS-Magazin. Vol. 46 (2018) Issue 2 . - pp. 64-70.

Gensel, Julia ; Benedict, C.:
Biergenuss mit Umweltschutz : Bayreuther Forscher entwickeln nachhaltige Bierproduktion.
In: Bayreuth Magazin. Vol. 12 (2018) . - p. 26.

Bargel, Hendrik ; Scheibel, Thomas:
Bioinspirierte Materialien : Aktuelle Trends in der Entwicklung.
In: MNU Journal. Vol. 71 (2018) Issue 01 . - pp. 4-10.

Aigner, Tamara B. ; DeSimone, Elise ; Scheibel, Thomas:
Biomedical Applications of Recombinant Silk-Based Materials.
In: Advanced Materials. Vol. 30 (2018) Issue 19 . - No. 1704636.
DOI: https://doi.org/10.1002/adma.201704636

Dauth, Markus ; Aksel, Nuri:
Breaking of waves on thin films over topographies.
In: Physics of Fluids. Vol. 30 (2018) Issue 8 . - No. 082113.
DOI: https://doi.org/10.1063/1.5038150

Söll, Christopher ; Reichenbach, Marc ; Röber, Jürgen ; Hagelauer, Amelie ; Weigel, Robert ; Fey, Dietmar:
Case Study on Memristor-Based Multilevel Memories.
In: International Journal of Circuit Theory and Applications. Vol. 46 (2018) Issue 1 . - pp. 99-112.
DOI: https://doi.org/10.1002/cta.2379

Bertleff, Benjamin ; Claußnitzer, Johannes ; Korth, Wolfgang ; Wasserscheid, Peter ; Jess, Andreas ; Albert, Jakob:
Catalyst Activation and Influence of the Oil Matrix on Extractive Oxidative Desulfurization Using Aqueous Polyoxometalate Solutions and Molecular Oxygen.
In: Energy & Fuels. Vol. 32 (2018) Issue 8 . - pp. 8683-8688.
DOI: https://doi.org/10.1021/acs.energyfuels.8b01514

Schubert, Michaela ; Münch, Christian ; Schuurman, Sophie ; Poulain, Veronique ; Kita, Jaroslaw ; Moos, Ralf:
Characterization of nickel manganite NTC thermistor films prepared by aerosol deposition at room temperature.
In: Journal of the European Ceramic Society. Vol. 38 (2018) Issue 2 . - pp. 613-619.
DOI: https://doi.org/10.1016/j.jeurceramsoc.2017.09.005

Spatz, Carolin ; Langhof, Nico ; Schmidt, Jens ; Krenkel, Walter:
CMC jackets for metallic pipes : a novel approach to prevent the creep deformation of thermo-mechanically loaded metals.
In: Journal of the European Ceramic Society. Vol. 38 (2018) Issue 8 . - pp. 2954-2960.
DOI: https://doi.org/10.1016/j.jeurceramsoc.2018.01.018

Volltext
Chen, Baizhu ; Synatschke, Christopher V. ; Jérôme, Valérie ; Müller, Axel H. E. ; Freitag, Ruth ; Wu, Chi:
Co-transfection of star-shaped PDMAEMAs enhance transfection efficiency of protamine/pDNA complexes in the presence of serum.
In: European Polymer Journal. (2018) . - 38 S..
DOI: https://doi.org/10.1016/j.eurpolymj.2018.04.022

Wang, Jia ; Scheibel, Thomas:
Coacervation of the Recombinant Mytilus galloprovincialis Foot Protein-3b.
In: Biomacromolecules. Vol. 19 (2018) Issue 9 . - pp. 3612-3619.
DOI: https://doi.org/10.1021/acs.biomac.8b00583

Richter, Christian ; Lehmann, Sebastian ; Böckler, Jens ; Willert-Porada, Monika ; Rosin, Andreas:
Combined Microwave and Laser Heating for Glazing of 8Y–ZrO₂ and 8Y–ZrO₂/ZrSiO₄–Composites.
In: Advanced Engineering Materials. Vol. 20 (2018) Issue 2 . - No. 1700912.
DOI: https://doi.org/10.1002/adem.201700912

Bektas, Murat ; Stöcker, Thomas ; Mergner, Angelika ; Hagen, Gunter ; Moos, Ralf:
Combined resistive and thermoelectric oxygen sensor with almost temperature-independent characteristics.
In: Journal of Sensors and Sensor Systems. Vol. 7 (2018) . - pp. 289-297.
DOI: https://doi.org/10.5194/jsss-7-289-2018

Kolotzek, Christoph ; Helbig, Christoph ; Thorenz, Andrea ; Reller, Armin ; Tuma, Axel:
A company-oriented model for the assessment of raw material supply risks, environmental impact and social implications.
In: Journal of Cleaner Production. Vol. 176 (2018) . - pp. 566-580.
DOI: https://doi.org/10.1016/j.jclepro.2017.12.162

Rosin, Andreas ; Hader, Michael ; Drescher, Corinna ; Suntinger, Magdalena ; Gerdes, Thorsten ; Willert-Porada, Monika ; Gaipl, Udo S. ; Frey, Benjamin:
Comparative study and simulation of tumor cell inactivation by microwave and conventional heating.
In: COMPEL : The International Journal for Computation and Mathematics in Electrical and Electronic Engineering. Vol. 37 (2018) Issue 6 . - pp. 1893-1904.
DOI: https://doi.org/10.1108/COMPEL-03-2017-0144

Hagen, Gunter ; Spannbauer, Christoph ; Feulner, Markus ; Kita, Jaroslaw ; Müller, Andreas ; Moos, Ralf:
Conductometric Soot Sensors : Internally Caused Thermophoresis as an Important Undesired Side Effect.
In: Sensors. Vol. 18 (2018) Issue 10 . - No. 3531.
DOI: https://doi.org/10.3390/s18103531

Volltext
Glenk, Christian ; Hüter, Florian ; Billenstein, Daniel ; Rieg, Frank:
Consideration of Body Forces within Finite Element Analysis.
In: Strojniski vestnik : Journal of Mechanical Engineering. Vol. 64 (2018) Issue 5 .
DOI: https://doi.org/10.5545/sv-jme.2017.5081

Grünewald, Jonas ; Parlevliet, Patricia ; Altstädt, Volker:
Definition of process parameters for manufacturing of thermoplastic composite sandwiches : Part A: Modelling.
In: Journal of Thermoplastic Composite Materials. Vol. 31 (2018) Issue 6 . - pp. 745-766.
DOI: https://doi.org/10.1177/0892705717729013

Grünewald, Jonas ; Parlevliet, Patricia ; Altstädt, Volker:
Definition of process parameters for manufacturing of thermoplastic composite sandwiches : Part B: Model verification.
In: Journal of Thermoplastic Composite Materials. Vol. 31 (2018) Issue 6 . - pp. 803-819.
DOI: https://doi.org/10.1177/0892705717722189

Huang, Xiao-Long ; Hagelauer, Amelie ; Zhou, Liang ; Völkel, Matthias ; Weigel, Robert ; Mao, Jun-Fa:
Design of a Novel Quarter-mode Substrate-Integrated Waveguide Filter With Multiple Transmission Zeros and Higher Mode Suppressions.
In: IEEE Transactions on Microwave Theory and Techniques. Vol. 66 (2018) Issue 12 . - pp. 5573-5584.
DOI: https://doi.org/10.1109/TMTT.2018.2879087

Standau, Tobias ; Hädelt, Bianca ; Schreier, Peter ; Altstädt, Volker:
Development of a Bead Foam from an Engineering Polymer with Addition of Chain Extender : Expanded Polybutylene Terephthalate.
In: Industrial & Engineering Chemistry Research. Vol. 57 (2018) Issue 50 . - pp. 17170-17176.
DOI: https://doi.org/10.1021/acs.iecr.8b04799

Wu, Xiaojun ; Langhof, Nico ; Krenkel, Walter ; Habath, Rebecca ; Lenz, Franziska:
Effect of pyrolysis temperature on the microstructure and capillary infiltration behavior of carbon/carbon composites.
In: Ceramics International. Vol. 44 (2018) Issue 14 . - pp. 16325-16332.
DOI: https://doi.org/10.1016/j.ceramint.2018.06.034

Ritter, Thomas ; Lattus, Julia ; Hagen, Gunter ; Moos, Ralf:
Effect of the Heterogeneous Catalytic Activity of Electrodes for Mixed Potential Sensors.
In: Journal of the Electrochemical Society. Vol. 165 (2018) Issue 16 . - B795-B803.
DOI: https://doi.org/10.1149/2.0181816jes

Roshanbinfar, Kaveh ; Vogt, Lena ; Greber, Boris ; Diecke, Sebastian ; Boccaccini, Aldo R. ; Engel, Felix B. ; Scheibel, Thomas:
Electroconductive Biohybrid Hydrogel for Enhanced Maturation and Beating Properties of Engineered Cardiac Tissues.
In: Advanced Functional Materials. (2018) . - pp. 1-10. - No. 1803951.
DOI: https://doi.org/10.1002/adfm.201803951

Volltext
Meinel, Andreas ; Tremmel, Stephan:
An Empirical Investigation of the Impact of an Axially Oscillating Shaft on Friction and Lubrication in Cylindrical Roller Bearings.
In: Bearing World Journal. Vol. 3 (2018) . - pp. 41-55.

Golser, Adrian V. ; Röber, Matthias ; Börner, Hans G. ; Scheibel, Thomas:
Engineered Collagen : A Redox Switchable Framework for Tunable Assembly and Fabrication of Biocompatible Surfaces.
In: ACS Biomaterials Science & Engineering. Vol. 4 (2018) Issue 6 . - pp. 2106-2114.
DOI: https://doi.org/10.1021/acsbiomaterials.7b00583

Lucke, Matthias ; Mottas, Inès ; Herbst, Tina ; Hotz, Christian ; Römer, Lin ; Schierling, Martina ; Herold, Heike M. ; Slotta, Ute ; Spinetti, Thibaud ; Scheibel, Thomas ; Winter, Gerhard ; Bourquin, Carole ; Engert, Julia:
Engineered hybrid spider silk particles as delivery system for peptide vaccines.
In: Biomaterials. Vol. 172 (2018) . - pp. 105-115.
DOI: https://doi.org/10.1016/j.biomaterials.2018.04.008

Haas, Sebastian ; Mosbacher, Mike ; Senkov, Oleg N. ; Feuerbacher, Michael ; Freudenberger, Jens ; Gezgin, Senol ; Völkl, Rainer ; Glatzel, Uwe:
Entropy Determination of Single-Phase High Entropy Alloys with Different Crystal Structures over a Wide Temperature Range.
In: Entropy. Vol. 20 (2018) Issue 9 . - Art.Nr. 654.
DOI: https://doi.org/10.3390/e20090654

Volltext
Dahiwal, Rahul ; Aschenbrenner, Alexander ; Schleich, Benjamin ; Wiesker, S. ; Kiekbusch, T. ; Tremmel, Stephan ; Wartzack, Sandro ; Sauer, Bernd:
Evaluation of the effects of geometrical deviations on the fatigue life and vibrations of cylindrical roller bearings.
In: Bearing World Journal. Vol. 3 (2018) . - pp. 7-21.

Müller, Sabrina ; Degler, David ; Feldmann, Claus ; Türk, Michael ; Moos, Ralf ; Fink, Karin ; Studt, Felix ; Gerthsen, Dagmar ; Barsan, Nicolae ; Grunwaldt, Jan-Dierk:
Exploiting Synergies in Catalysis and Gas Sensing using Noble Metal-Loaded Oxide Composites.
In: ChemCatChem. Vol. 10 (2018) Issue 5 . - pp. 864-880.
DOI: https://doi.org/10.1002/cctc.201701545

Hardy, John G. ; Bertin, Annabelle ; Torres-Rendon, Jose Guillermo ; Leal-Egaña, Aldo ; Humenik, Martin ; Bauer, Felix ; Walther, Andreas ; Cölfen, Helmut ; Schlaad, Helmut ; Scheibel, Thomas:
Facile Photochemical Modification of Silk Protein–Based Biomaterials.
In: Macromolecular Bioscience. (2018) . - pp. 1-6. - No. 1800216.
DOI: https://doi.org/10.1002/mabi.201800216

Volltext

Volltext

Schadeck, Ulrich ; Kyrgyzbaev, Kanat ; Zettl, Heiko ; Gerdes, Thorsten ; Moos, Ralf:
Flexible, Heat-Resistant, and Flame-Retardant Glass Fiber Nonwoven/Glass Platelet Composite Separator for Lithium-Ion Batteries.
In: Energies. Vol. 11 (2018) Issue 4 . - No. 999.
DOI: https://doi.org/10.3390/en11040999

Volltext
Rößler, Stefan ; Kern, Christoph ; Jess, Andreas:
Formation and Vaporization of Hydrocarbons During Cobalt-Catalysed Fischer-Tropsch Synthesis.
In: Chemie Ingenieur Technik. Vol. 90 (2018) Issue 5 . - pp. 634-642.
DOI: https://doi.org/10.1002/cite.201700142

Bard, Simon ; Demleitner, Martin ; Häublein, Markus ; Altstädt, Volker:
Fracture behaviour of prepreg laminates studied by in-situ SEM mechanical tests.
In: Procedia Structural Integrity. Vol. 13 (2018) . - pp. 1442-1446.
DOI: https://doi.org/10.1016/j.prostr.2018.12.299

Volltext
Radakovitsch, Florian ; Heym, Florian ; Jess, Andreas:
Gas Drying Using Supported Ionic Liquids.
In: Chemical Engineering Transactions. Vol. 69 (2018) . - pp. 667-672.
DOI: https://doi.org/10.3303/CET1869112

Choudhury, Soumyadip ; Ebert, Thomas ; Windberg, Tina ; Seifert, Andreas ; Göbel, Michael ; Simon, Frank ; Formanek, Petr ; Stamm, Manfred ; Spange, Stefan ; Ionov, Leonid:
Hierarchical Porous Carbon Cathode for Lithium–Sulfur Batteries Using Carbon Derived from Hybrid Materials Synthesized by Twin Polymerization.
In: Particle & Particle Systems Characterization. Vol. 35 (2018) Issue 12 . - No.1800364.
DOI: https://doi.org/10.1002/ppsc.201800364

El-Nagar, Gumaa A. ; Lauermann, Iver ; Sarhan, Radwan M. ; Roth, Christina:
Hierarchically structured iron-doped silver (Ag–Fe) lotus flowers for an efficient oxygen reduction reaction.
In: Nanoscale. Vol. 10 (2018) Issue 15 . - pp. 7304-7310.
DOI: https://doi.org/10.1039/C8NR00020D

Schubert, Michael ; Leupold, Nico ; Exner, Jörg ; Kita, Jaroslaw ; Moos, Ralf:
High-Temperature Electrical Insulation Behavior of Alumina Films Prepared at Room Temperature by Aerosol Deposition and Influence of Annealing Process and Powder Impurities.
In: Journal of Thermal Spray Technology. Vol. 27 (2018) Issue 5 . - pp. 870-879.
DOI: https://doi.org/10.1007/s11666-018-0719-x

Volltext

Volltext
Rausch, Peter ; Jess, Andreas ; Kern, Christoph ; Korth, Wolfgang ; Kraft, Nannette:
Hydrocracking of Fischer-Tropsch Wax with Tungstovanadophosphoric Salts as Catalysts.
In: Chemical Engineering & Technology. Vol. 41 (2018) Issue 3 . - pp. 469-478.
DOI: https://doi.org/10.1002/ceat.201700384

Esmaeili, Mohsen ; Pircheraghi, Gholamreza ; Bagheri, Amir Reza ; Altstädt, Volker:
The impact of morphology on thermal properties and aerobic biodegradation of physically compatibilized poly (lactic acid)/co‐plasticized thermoplastic starch blends.
In: Polymers for Advanced Technologies. Vol. 29 (2018) Issue 12 . - pp. 2880-2889.
DOI: https://doi.org/10.1002/pat.4407

Mörl, Michaela ; Steinlein, Christoph ; Kreger, Klaus ; Schmidt, Hans-Werner ; Altstädt, Volker:
Improved compression properties of polypropylene extrusion foams by supramolecular additives.
In: Journal of Cellular Plastics. Vol. 54 (2018) Issue 3 . - pp. 483-498.
DOI: https://doi.org/10.1177/0021955X17695096

Mickoleit, Frank ; Borkner, Christian B. ; Toro-Nahuelpan, Mauricio ; Herold, Heike M. ; Maier, Denis S. ; Plitzko, Jürgen M. ; Scheibel, Thomas ; Schüler, Dirk:
In Vivo Coating of Bacterial Magnetic Nanoparticles by Magnetosome Expression of Spider Silk-Inspired Peptides.
In: Biomacromolecules. Vol. 19 (2018) Issue 3 . - pp. 962-972.
DOI: https://doi.org/10.1021/acs.biomac.7b01749

Leupold, Nico ; Schubert, Michael ; Kita, Jaroslaw ; Moos, Ralf:
Influence of high temperature annealing on the dielectric properties of alumina films prepared by the aerosol deposition method.
In: Functional Materials Letters. Vol. 11 (2018) Issue 2 . - No. 1850022.
DOI: https://doi.org/10.1142/S1793604718500224

Kellner, Peter M. ; Völkl, Rainer ; Glatzel, Uwe:
Influence of Ingot and Powder Metallurgy Production Route on the Tensile Creep Behavior of Mo–9Si–8B Alloys with Additions of Al and Ge.
In: Advanced Engineering Materials. Vol. 20 (2018) Issue 1 . - Art.Nr. 1700751.
DOI: https://doi.org/10.1002/adem.201700751

Volltext
Bresch, Sophie ; Mieller, Björn ; Delorme, Fabian ; Chen, Cong ; Bektas, Murat ; Moos, Ralf ; Rabe, Torsten:
Influence of Reaction-Sintering and Calcination Conditions on Thermoelectric Properties of Sm-doped Calcium Manganate CaMnO3.
In: Journal of Ceramic Science and Technology. Vol. 9 (2018) Issue 3 . - pp. 289-300.
DOI: https://doi.org/10.4416/JCST2018-00017

Bakis, Gökhan ; Kothmann, Martin H. ; Zeiler, Rico ; Brückner, Alexander ; Ziadeh, Mazen ; Breu, Josef ; Altstädt, Volker:
Influence of size, aspect ratio and shear stiffness of nanoclays on the fatigue crack propagation behavior of their epoxy nanocomposites.
In: Polymer. Vol. 158 (2018) . - pp. 372-380.
DOI: https://doi.org/10.1016/j.polymer.2018.10.008

Volltext
Bresch, Sophie ; Mieller, Björn ; Selleng, Christian ; Stöcker, Thomas ; Moos, Ralf ; Rabe, Torsten:
Influence of the calcination procedure on the thermoelectric properties of calcium cobaltite Ca3Co4O9.
In: Journal of Electroceramics. Vol. 40 (2018) Issue 3 . - pp. 225-234.
DOI: https://doi.org/10.1007/s10832-018-0124-3

Hochrein, David ; Tremmel, Stephan ; Wartzack, Sandro:
The Influence of the Centripetal Acceleration on the Temperature Behavior of Rolling Bearings.
In: Bearing World Journal. Vol. 3 (2018) . - pp. 57-69.

Helen, M. ; Diemant, Thomas ; Schindler, Stefan ; Behm, R. Jürgen ; Danzer, Michael A. ; Kaiser, Ute ; Fichtner, Maximilian ; Reddy, M. Anji:
Insight into Sulfur Confined in Ultramicroporous Carbon.
In: ACS Omega. Vol. 3 (2018) Issue 9 . - pp. 11290-11299.
DOI: https://doi.org/10.1021/acsomega.8b01681

Bargel, Hendrik ; Scheibel, Thomas:
Inspirationen für mechanisch stabile Materialien aus der Natur : Von Gräsern über Spinnenseide bis zu Kieselalgen.
In: MNU Journal. Vol. 71 (2018) Issue 01 . - pp. 37-44.

Hagelauer, Amelie ; Wojnowski, Maciej ; Pressel, Klaus ; Weigel, Robert ; Kissinger, Dietmar:
Integrated Systems-in-Package : Heterogeneous Integration of Millimeter-Wave Active Circuits and Passives in Fan-Out Wafer-Level Packaging Technologies.
In: IEEE Microwave Magazine. Vol. 19 (2018) Issue 1 . - pp. 48-56.
DOI: https://doi.org/10.1109/MMM.2017.2759558

Goodarzi Hosseinabadi, Hossein ; Bagheri, Amir Reza ; Gigl, T. ; Hugenschmidt, C. ; Raps, Daniel ; Altstädt, Volker:
Interrelation between mechanical response, strain field, and local free volume evolution in glassy polymers : Seeking the atomistic origin of post-yield softening.
In: eXPRESS Polymer Letters. Vol. 12 (2018) Issue 1 . - pp. 2-12.
DOI: https://doi.org/10.3144/expresspolymlett.2018.2

Chauhan, Vikrant ; Mayer, Markus ; Ruile, Werner ; Wagner, Karl ; Mayer, Andreas ; Weigel, Robert ; Hagelauer, Amelie:
Investigation on Third-Order Intermodulation Distortions due to Material Nonlinearities in TC-SAW Devices.
In: IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control. Vol. 65 (2018) Issue 10 . - pp. 1914-1924.
DOI: https://doi.org/10.1109/TUFFC.2018.2832283

Bertleff, Benjamin ; Goebel, Rebecca ; Claußnitzer, Johannes ; Korth, Wolfgang ; Skiborowski, Mirko ; Wasserscheid, Peter ; Jess, Andreas ; Albert, Jakob:
Investigations on Catalyst Stability and Product Isolation in the Extractive Oxidative Desulfurization of Fuels Using Polyoxometalates and Molecular Oxygen.
In: ChemCatChem. Vol. 10 (2018) Issue 20 . - pp. 4602-4609.
DOI: https://doi.org/10.1002/cctc.201801081

Vogel, Leah ; Wagner, Ricarda ; Moos, Ralf ; Schönauer-Kamin, Daniela:
Investigations on the crystal growth mechanism of one-pot-synthesized Al-doped ZnO and its UV-enhanced room temperature NO2 gas sensing characteristics.
In: Functional Materials Letters. Vol. 11 (2018) Issue 4 . - Art.Nr. 1850087.
DOI: https://doi.org/10.1142/S179360471850087X

Pavel, Nicolaie ; Bärwinkel, Mark ; Heinz, Peter ; Brüggemann, Dieter ; Dearden, Geoff ; Croitoru, Gabriela ; Grigore, Oana Valeria:
Laser ignition : Spark plug development and application in reciprocating engines.
In: Progress in Quantum Electronics. Vol. 58 (2018) . - pp. 1-32.
DOI: https://doi.org/10.1016/j.pquantelec.2018.04.001

Höhlein, Stephan ; König-Haagen, Andreas ; Brüggemann, Dieter:
Macro-Encapsulation of Inorganic Phase-Change Materials (PCM) in Metal Capsules.
In: Materials. Vol. 11 (2018) Issue 9 . - No. 1752.
DOI: https://doi.org/10.3390/ma11091752

Kögel, Armin ; Aksel, Nuri:
Massive stabilization of gravity-driven film flows with corrugated side walls.
In: Physics of Fluids. Vol. 30 (2018) Issue 11 . - No. 114105.
DOI: https://doi.org/10.1063/1.5055931

Streibl, Maximilian ; Karmazin, Roman ; Moos, Ralf:
Materials and Applications of Polymer Films for Power Capacitors with Special Respect to Nanocomposites.
In: IEEE Transactions on Dielectrics and Electrical Insulation. Vol. 25 (2018) Issue 6 . - pp. 2429-2442.
DOI: https://doi.org/10.1109/TDEI.2018.007392

Volltext
Michlik, Tobias ; Schmid, Manuela ; Rosin, Andreas ; Gerdes, Thorsten ; Moos, Ralf:
Mechanical Coating of Zinc Particles with Bi₂O₃-Li₂O-ZnO Glasses as Anode Material for Rechargeable Zinc-Based Batteries.
In: Batteries. Vol. 4 (2018) Issue 1 . - No. 12.
DOI: https://doi.org/10.3390/batteries4010012

Trenz, Florian ; Weigel, Robert ; Hagelauer, Amelie:
Methods for Human Dehydration Measurement.
In: Frequenz. Vol. 72 (2018) Issue 3/4 . - pp. 159-166.
DOI: https://doi.org/10.1515/freq-2018-0006

Hofmann, Eddie ; Krüger, Kilian ; Haynl, Christian ; Scheibel, Thomas ; Trebbin, Martin ; Förster, Stephan:
Microfluidic nozzle device for ultrafine fiber solution blow spinning with precise diameter control.
In: Lab on a Chip. Vol. 18 (2018) Issue 15 . - pp. 2225-2234.
DOI: https://doi.org/10.1039/c8lc00304a

Mora-García, Alma G. ; Ruíz-Luna, Haidee ; Mosbacher, Mike ; Popp, Robert ; Schulz, Uwe ; Glatzel, Uwe ; Muñoz-Saldaña, Juan:
Microstructural analysis of Ta-containing NiCoCrAlY bond coats deposited by HVOF on different Ni-based superalloys.
In: Surface and Coatings Technology. Vol. 354 (2018) . - pp. 214-225.
DOI: https://doi.org/10.1016/j.surfcoat.2018.09.025

Hagelauer, Amelie ; Fattinger, Gernot ; Ruppel, Clemens ; Ueda, Masanori ; Hashimoto, Ken-ya ; Tag, Andreas:
Microwave Acoustic Wave Devices : Recent Advances on Architectures, Modeling, Materials, and Packaging.
In: IEEE Transactions on Microwave Theory and Techniques. Vol. 66 (2018) Issue 10 . - pp. 4548-4562.
DOI: https://doi.org/10.1109/TMTT.2018.2854160

Volltext
Rosemann, Bernd:
Mit Hightech im Umweltschutz fit fürs Studium : Ingenieure fördern Nachwuchs in Junior-Ingenieur-Akademie.
Universität Bayreuth
In: UBT aktuell. (2018) Issue 1 . - p. 41.
Review:

Wolff, Nicolas ; Röder, Fridolin ; Krewer, Ulrike:
Model Based Assessment of Performance of Lithium-Ion Batteries Using Single Ion Conducting Electrolytes.
In: Electrochimica Acta. Vol. 284 (2018) . - pp. 639-646.
DOI: https://doi.org/10.1016/j.electacta.2018.07.125

Fischer, Tim ; Welzenbach, Sarah ; Meier, Felix ; Werner, Ewald ; Ulan kyzy, Sonun ; Munz, Oliver:
Modeling the rubbing contact in honeycomb seals.
In: Continuum Mechanics and Thermodynamics. Vol. 30 (2018) Issue 2 . - pp. 381-395.
DOI: https://doi.org/10.1007/s00161-017-0608-4

Lin, Nan ; Röder, Fridolin ; Krewer, Ulrike:
Multiphysics Modeling for Detailed Analysis of Multi-Layer Lithium-Ion Pouch Cells.
In: Energies. Vol. 11 (2018) Issue 11 . - No. 2998.
DOI: https://doi.org/10.3390/en11112998

Haug, M. ; Reischl, B. ; Prölß, G. ; Pollmann, C. ; Buckert, T. ; Keidel, C. ; Schürmann, S. ; Hock, M. ; Rupitsch, S. ; Heckel, Michael ; Pöschel, Thorsten ; Scheibel, Thomas ; Haynl, Christian ; Kiriaev, L. ; Head, Sl ; Friedrich, Oliver:
The MyoRobot : A novel automated biomechatronics System to assess voltage/Ca²⁺ biosensors and active/passive biomechanics in muscle and biomaterials.
In: Biosensors and Bioelectronics. Vol. 102 (2018) . - pp. 589-599.
DOI: https://doi.org/10.1016/j.bios.2017.12.003

Puchas, Georg ; Krenkel, Walter:
Neuartige Herstellungsverfahren für oxidkeramische Faserverbundwerkstoffe.
In: dIALOG : Materialwissenschaft und Werkstofftechnik. (2018) Issue 1 . - pp. 34-41.

Volltext
Riedl, Simon ; Kaiser, Patrick ; Raup, Alexander ; Synatschke, Christopher ; Jérôme, Valérie ; Freitag, Ruth:
Non-Viral Transfection of Human T Lymphocytes.
In: Processes. Vol. 6 (2018) Issue 10 . - No. 188.
DOI: https://doi.org/10.3390/pr6100188

Wolff, Nicolas ; Harting, Nina ; Heinrich, Marco ; Röder, Fridolin ; Krewer, Ulrike:
Nonlinear Frequency Response Analysis on Lithium-Ion Batteries : A Model-Based Assessment.
In: Electrochimica Acta. Vol. 260 (2018) . - pp. 614-622.
DOI: https://doi.org/10.1016/j.electacta.2017.12.097

Schlordt, Tobias ; Puchas, Georg ; Scheler, Sven ; Martin, Bernd ; Krenkel, Walter:
Novel Oxide Fibre Composites (OFC) with Porous Matrices.
In: Ceramic Forum International. (2018) . - pp. 149-152.

Stoppok, Manfred ; Jess, Andreas ; Freitag, Ruth ; Alber, Erdmute:
Of culture, consumption and cost : A comparative Analysis of household energy consumption in Kenya, Germany and Spain.
In: Energy Research & Social Science. Vol. 40 (2018) . - pp. 127-139.
DOI: https://doi.org/10.1016/j.erss.2017.12.004

Engelbrecht, Andreas ; Uhlig, Conrad ; Stark, Oliver ; Hämmerle, Martin ; Schmid, Günter ; Magori, Erhard ; Wiesner-Fleischer, Kerstin ; Fleischer, Maximilian ; Moos, Ralf:
On the Electrochemical CO₂ Reduction at Copper Sheet Electrodes with Enhanced Long-Term Stability by Pulsed Electrolysis.
In: Journal of the Electrochemical Society. Vol. 165 (2018) Issue 15 . - J3059-J3068.
DOI: https://doi.org/10.1149/2.0091815jes

Rieg, Frank ; Zahn, Aljoscha ; Deese, Kevin:
Optimierung im Produktentwicklungsprozess : Optimale Produktentwicklung mit der kostenlosen Software für Topologieoptimierung Z88ArionV2.
In: Newsletter Wissenschaftliche Gesellschaft für Produktentwicklung, WiGeP. (2018) Issue 1 . - p. 17.

Schön, André ; Hofmann, Viktor ; Bakran, Mark-M.:
Optimisation of the HVDC auto transformer by using hybrid MMC modulation.
In: IET Power Electronics. Vol. 11 (2018) Issue 3 . - pp. 468-476.
DOI: https://doi.org/10.1049/iet-pel.2017.0417

Trosch, Tanja ; Lalire, Fanny ; Pommier, Stéphane ; Völkl, Rainer ; Glatzel, Uwe:
Optimization of a jewellery platinum alloy for precision casting : Evaluation of mechanical, microstructural and optical properties.
In: Johnson Matthey Technology Review. Vol. 62 (2018) Issue 4 . - pp. 364-382.
DOI: https://doi.org/10.1595/205651318X696837

Volltext
Weithmann, Nicolas ; Möller, Julia N. ; Löder, Martin G. J. ; Piehl, Sarah ; Laforsch, Christian ; Freitag, Ruth:
Organic fertilizer as a vehicle for the entry of microplastic into the environment.
In: Science Advances. Vol. 4 (2018) Issue 4 .
DOI: https://doi.org/10.1126/sciadv.aap8060

Volltext
Mosbacher, Mike ; Scherm, Florian ; Glatzel, Uwe:
Oxygen diffusion kinetics of an advanced three step heat treatment for zirconium alloy ZrNb7.
In: Surface and Coatings Technology. Vol. 339 (2018) . - pp. 139-146.
DOI: https://doi.org/10.1016/j.surfcoat.2018.02.015

Pretscher, Martin ; Pineda-Contreras, Beatriz A. ; Kaiser, Patrick ; Reich, Steffen ; Schöbel, Judith ; Kuttner, Christian ; Freitag, Ruth ; Fery, Andreas ; Schmalz, Holger ; Agarwal, Seema:
pH-Responsive Biohybrid Carrier Material for Phenol Decontamination in Wastewater.
In: Biomacromolecules. Vol. 19 (2018) Issue 8 . - pp. 3224-3232.
DOI: https://doi.org/10.1021/acs.biomac.8b00361

Choudhury, Soumyadip ; Fischer, Dieter ; Formanek, Petr ; Stamm, Manfred ; Ionov, Leonid:
Phase Inversion Strategy to Fabricate Porous Carbon for Li-S Batteries via Block Copolymer Self-Assembly.
In: Advanced Materials Interfaces. Vol. 5 (2018) Issue 5 . - No. 1701116.
DOI: https://doi.org/10.1002/admi.201701116

Fleck, Michael ; Federmann, Holger ; Pogorelov, Evgeny:
Phase-field modeling of Li-insertion kinetics in single LiFePO₄-nano-particles for rechargeable Li-ion battery application.
In: Computational Materials Science. Vol. 153 (2018) . - pp. 288-296.
DOI: https://doi.org/10.1016/j.commatsci.2018.06.049

Volltext
Choudhury, Soumyadip ; Fischer, Dieter ; Formanek, Petr ; Simon, Frank ; Stamm, Manfred ; Ionov, Leonid:
Porous carbon prepared from polyacrylonitrile for lithium-sulfur battery cathodes using phase inversion technique.
In: Polymer. Vol. 151 (2018) . - pp. 171-178.
DOI: https://doi.org/10.1016/j.polymer.2018.07.026

Hanft, Dominik ; Bektas, Murat ; Moos, Ralf:
Powder pre-treatment for aerosol deposition of tin dioxide coatings for gas sensors.
In: Materials. Vol. 11 (2018) Issue 8 . - No. 1342.
DOI: https://doi.org/10.3390/ma11081342

Kaiser, Patrick ; Reich, Steffen ; Greiner, Andreas ; Freitag, Ruth:
Preparation of Biocomposite Microfibers Ready for Processing into Biologically Active Textile Fabrics for Bioremediation.
In: Macromolecular Bioscience. Vol. 18 (2018) Issue 7 . - No. 1800046.
DOI: https://doi.org/10.1002/mabi.201800046

Volltext
Kellner, Peter M. ; Dijkstra, Hans ; Glatzel, Uwe:
Quantitative analysis of Mo–Si–B alloy phases with wavelength dispersive spectroscopy (WDS–SEM).
In: X-Ray Spectrometry. Vol. 47 (2018) Issue 2 . - pp. 153-158.
DOI: https://doi.org/10.1002/xrs.2824

Volltext
Anke, Marie-Luise ; Hämmerle, Martin ; Jess, Andreas ; Moos, Ralf:
Radio frequency- and impedance-based sensing of ionic liquids supported on porous carriers and their limitations.
In: Sensors and Actuators B: Chemical. Vol. 273 (2018) . - pp. 1564-1571.
DOI: https://doi.org/10.1016/j.snb.2018.07.036

Klingan, Katharina ; Kottakkat, Tintula ; Jovanov, Zarko P. ; Jiang, Shan ; Pasquini, Chiara ; Scholten, Fabian ; Kubella, Paul ; Bergmann, Arno ; Roldan Cuenya, Beatriz ; Roth, Christina ; Dau, Holger:
Reactivity Determinants in Electrodeposited Cu Foams for Electrochemical CO2 Reduction.
In: ChemSusChem. Vol. 11 (2018) Issue 19 . - pp. 3449-3459.
DOI: https://doi.org/10.1002/cssc.201801582

Wang, Jja ; Scheibel, Thomas:
Recombinant Production of Mussel Byssus Inspired Proteins.
In: Biotechnology Journal. Vol. 13 (2018) Issue 12 . - No. 1800146.
DOI: https://doi.org/10.1002/biot.201800146

Kumari, Sushma ; Bargel, Hendrik ; Anby, Mette U. ; Lafargue, David ; Scheibel, Thomas:
Recombinant spider silk hydrogels for sustained release of biologicals.
In: ACS Biomaterials Science & Engineering. Vol. 4 (2018) Issue 5 . - pp. 1750-1759.
DOI: https://doi.org/10.1021/acsbiomaterials.8b00382

Krewer, Ulrike ; Röder, Fridolin ; Harinath, Eranda ; Braatz, Richard D. ; Bedürftig, Benjamin ; Findeisen, Rolf:
Review—Dynamic Models of Li-Ion Batteries for Diagnosis and Operation : A Review and Perspective.
In: Journal of the Electrochemical Society. Vol. 165 (2018) Issue 16 . - S. A3656-A3673.
DOI: https://doi.org/10.1149/2.1061814jes

Kaiser, Patrick ; Werner, Melanie ; Jérôme, Valérie ; Freitag, Ruth:
Scale‐up of the ex vivo expansion of encapsulated primary human T lymphocytes.
In: Biotechnology and Bioengineering. Vol. 115 (2018) Issue 10 . - pp. 2632-2642.
DOI: https://doi.org/10.1002/bit.26786

Mohamed, Fathia ; Flämig, Max ; Hofmann, Marius ; Heymann, Lutz ; Willner, L. ; Fatkullin, Nail ; Aksel, Nuri ; Rößler, Ernst:
Scaling analysis of the viscoelastic response of linear polymers.
In: The Journal of Chemical Physics. Vol. 149 (2018) Issue 4 . - No. 044902.
DOI: https://doi.org/10.1063/1.5038643

Rieg, Frank:
Selbstgedreht: Drehbänke für Einsteiger, Teil 2.
In: Oldtimer Praxis : Das Schrauber-Magazin. Vol. 2018 (2018) Issue 8 . - pp. 98-102.

Haupt, Axel ; Keller, Lisa-Marie ; Kutter, Maximilian ; Lentz, Dieter:
Selective Synthesis of Perfluoroalkylated Corannulenes and Investigation of their Structural, Dynamic and Electrochemical Behavior.
In: Chemistry : a European Journal. Vol. 24 (2018) Issue 42 . - pp. 10756-10765.
DOI: https://doi.org/10.1002/chem.201801021

Humenik, Martin ; Mohrand, Madeleine ; Scheibel, Thomas:
Self-Assembly of Spider Silk-Fusion Proteins Comprising Enzymatic and Fluorescence Activity.
In: Bioconjugate Chemistry. Vol. 29 (2018) Issue 4 . - pp. 898-904.
DOI: https://doi.org/10.1021/acs.bioconjchem.7b00759

Volltext
Moos, Ralf ; Walter, Stefanie ; Steiner, Carsten ; Hagen, Gunter:
Sensing Catalytic Converters and Filters at Work Using Radio Frequencies.
In: Proceedings. Vol. 2 (2018) Issue 13 . - No. 1101.
DOI: https://doi.org/10.3390/proceedings2131101

Goodarzi Hosseinabadi, Hossein ; Bagheri, Amir Reza ; Altstädt, Volker:
Shear band propagation in honeycombs : numerical and experimental.
In: Rapid Prototyping Journal. Vol. 24 (2018) Issue 2 . - pp. 477-484.
DOI: https://doi.org/10.1108/RPJ-06-2016-0098

Humenik, Martin ; Lang, Gregor ; Scheibel, Thomas:
Silk nanofibril self-assembly versus electrospinning.
In: WIREs Nanomedicine and Nanobiotechnology. Vol. 10 (2018) Issue 4 . - 24 S..
DOI: https://doi.org/10.1002/wnan.1509

Thomitzek, Matthias ; Schmidt, Oke ; Röder, Fridolin ; Krewer, Ulrike ; Herrmann, Christoph ; Thiede, Sebastian:
Simulating Process-Product Interdependencies in Battery Production Systems.
In: Procedia CIRP. Vol. 72 (2018) . - pp. 346-351.
DOI: https://doi.org/10.1016/j.procir.2018.03.056

Ritter, Thomas ; Hagen, Gunter ; Lattus, Julia ; Moos, Ralf:
Solid state mixed potential sensors as direct conversion sensors for automotive catalysts.
In: Sensors and Actuators B: Chemical. Vol. 255 (2018) Issue 3 . - pp. 3025-3032.
DOI: https://doi.org/10.1016/j.snb.2017.09.126

Rieg, Frank:
Spannungsvoll : Drehbänke für Einsteiger.
In: Oldtimer Praxis : Das Schrauber-Magazin. Vol. 2018 (2018) Issue 7 . - pp. 85-89.

Volltext
Schörner, Mario ; Aksel, Nuri:
The stability cycle : A universal pathway for the stability of films over topography.
In: Physics of Fluids. Vol. 30 (2018) Issue 1 . - No. 012105.
DOI: https://doi.org/10.1063/1.5003449

Ulrich, Anke S. ; Pfizenmaier, Petra ; Solimani, Ali ; Glatzel, Uwe ; Galetz, Mathias C.:
Strengthened Cr-Si-base alloys for high temperature applications.
In: International Journal of Refractory Metals and Hard Materials. Vol. 76 (2018) . - pp. 72-81.
DOI: https://doi.org/10.1016/j.ijrmhm.2018.05.016

Helbig, Christoph ; Bradshaw, Alex M. ; Wietschel, Lars ; Thorenz, Andrea ; Tuma, Axel:
Supply risks associated with lithium-ion battery materials.
In: Journal of Cleaner Production. Vol. 172 (2018) . - pp. 274-286.
DOI: https://doi.org/10.1016/j.jclepro.2017.10.122

Schmidt, Christoph ; Westermann, Hans Henrik ; Thorenz, Benjamin ; Steinhilper, Rolf:
Sustainability of cutting frozen wood : an analysis of buzz saw blades cutting performance depending on wood temperature.
In: Procedia Manufacturing. Vol. 25 (2018) . - pp. 263-270.
DOI: https://doi.org/10.1016/j.promfg.2018.06.082

Schörner, Mario ; Reck, Daniel ; Aksel, Nuri ; Trifonov, Yuri:
Switching between different types of stability isles in films over topographies.
In: Acta Mechanica. Vol. 229 (2018) . - pp. 423-436.
DOI: https://doi.org/10.1007/s00707-017-1979-0

Akhmetova, Irina ; Schutjajew, Konstantin ; Wilke, Manuel ; Buzanich, Ana ; Rademann, Klaus ; Roth, Christina ; Emmerling, Franziska:
Synthesis, characterization and in situ monitoring of the mechanochemical reaction process of two manganese(II)-phosphonates with N-containing ligands.
In: Journal of Materials Science. Vol. 53 (2018) Issue 19 . - pp. 13390-13399.
DOI: https://doi.org/10.1007/s10853-018-2608-6

Welzenbach, Sarah ; Fischer, Tim ; Meier, Felix ; Werner, Ewald ; Ulan kyzy, Sonun ; Munz, Oliver:
Temperature distribution of a simplified rotor due to a uniform heat source.
In: Continuum Mechanics and Thermodynamics. Vol. 30 (2018) Issue 2 . - pp. 279-290.
DOI: https://doi.org/10.1007/s00161-017-0600-z

Manzoni, Anna M. ; Haas, Sebastian ; Daoud, Haneen ; Glatzel, Uwe ; Förster, Christiane ; Wanderka, Nelia:
Tensile Behavior and Evolution of the Phases in the Al₁₀Co₂₅Cr₈Fe₁₅Ni₃₆Ti₆ Compositionally Complex/High Entropy Alloy.
In: Entropy. Vol. 20 (2018) Issue 9 .
DOI: https://doi.org/10.3390/e20090646

Schubert, Michaela ; Münch, Christian ; Schuurman, Sophie ; Poulain, Veronique ; Kita, Jaroslaw ; Moos, Ralf:
Thermal Treatment of Aerosol Deposited NiMn₂O₄ NTC Thermistors for Improved Aging Stability.
In: Sensors. Vol. 18 (2018) Issue 11 . - No. 3982.
DOI: https://doi.org/10.3390/s18113982

Zimmermann-Ptacek, Johanna ; Muggli, Mark ; Wildhack, Stefanie ; Hintzer, Klaus ; Gerdes, Thorsten ; Willert-Porada, Monika ; Moos, Ralf:
Thermal, dielectric, and mechanical properties of h‐BN‐filled PTFE composites.
In: Journal of Applied Polymer Science. Vol. 135 (2018) Issue 44 . - Art.Nr. 46859.
DOI: https://doi.org/10.1002/app.46859

Metzner, Julia ; Luckert, Katrin ; Lemuth, Karin ; Hämmerle, Martin ; Moos, Ralf:
Towards an Electrochemical Immunosensor System with Temperature Control for Cytokine Detection.
In: Sensors. Vol. 18 (2018) Issue 5 .
DOI: https://doi.org/10.3390/s18051309

Hutner, Petra ; Helbig, Christoph ; Stindt, Dennis ; Thorenz, Andrea ; Tuma, Axel:
Transdisciplinary Development of a Life Cycle-Based Approach to Measure and Communicate Waste Prevention Effects in Local Authorities.
In: Journal of Industrial Ecology. Vol. 22 (2018) Issue 5 . - pp. 1050-1065.
DOI: https://doi.org/10.1111/jiec.12781

Volltext
Deese, Kevin ; Geilen, Max ; Rieg, Frank:
A Two-Step Smoothing Algorithm for an Automatic Product Development Process.
In: International Journal of Simulation Modelling. Vol. 17 (2018) Issue 2 . - pp. 308-317.

Volltext
Mader, Michael ; Jérôme, Valérie ; Freitag, Ruth ; Agarwal, Seema ; Greiner, Andreas:
Ultraporous, compressible, wettable polylactide/polycaprolactone sponges for tissue engineering.
In: Biomacromolecules. Vol. 19 (2018) Issue 5 . - pp. 1663-1673.
DOI: https://doi.org/10.1021/acs.biomac.8b00434

Volltext
Fleck, Michael ; Querfurth, Frank ; Glatzel, Uwe:
Phase field modeling of solidification in multi-component alloys with a case study on the Inconel 718 alloy.
In: Journal of Materials Research. Vol. 32 (28 December 2017) Issue 24 . - pp. 4605-4615. - 11 S..
DOI: https://doi.org/10.1557/jmr.2017.393

Heberle, Florian ; Hofer, Markus ; Ürlings, Nicolas ; Schröder, Hartwig ; Anderlohr, Thomas ; Brüggemann, Dieter:
Techno-economic analysis of a solar thermal retrofit for an air-cooled geothermal Organic Rankine Cycle power plant.
In: Renewable Energy. Vol. 113 (1 December 2017) . - pp. 494-502.
DOI: https://doi.org/10.1016/j.renene.2017.06.031

Volltext
Furtat, Plinio ; Lenz-Leite, Mateus ; Ionescu, Emanuel ; Machado, R. A. F. ; Motz, Günter:
Synthesis of fluorine-modified polysilazanes via Si-H bonds activation and their application as protective hydrophobic coatings.
In: Journal of Materials Chemistry A. Vol. 5 (30 November 2017) . - pp. 25509-25521.
DOI: https://doi.org/10.1039/c7ta07687h

Preißinger, Markus ; Schwöbel, Johannes A.H. ; Klamt, Andreas ; Brüggemann, Dieter:
Multi-criteria evaluation of several million working fluids for waste heat recovery by means of Organic Rankine Cycle in passenger cars and heavy-duty trucks.
In: Applied Energy. Vol. 206 (15 November 2017) . - pp. 887-899.
DOI: https://doi.org/10.1016/j.apenergy.2017.08.212

Volltext
Jess, Andreas:
Höchste Energiedichte in neuen Speichern.
In: Spektrum. Vol. 13 (November 2017) Issue 2 . - p. 71.

Volltext
Jess, Andreas ; Brüggemann, Dieter:
Verantwortung und Innovation : Auf dem Weg zu einer nachhaltigen Energieversorgung.
In: Spektrum. Vol. 13 (November 2017) Issue 2 . - pp. 66-70.

Goodarzi Hosseinabadi, Hossein ; Bagheri, Amir Reza ; Avila Gray, L. ; Altstädt, Volker ; Drechsler, K.:
Plasticity in polymeric honeycombs made by photo-polymerization and nozzle based 3D-printing.
In: Polymer Testing. Vol. 63 (October 2017) . - pp. 163-167.
DOI: https://doi.org/10.1016/j.polymertesting.2017.08.008

Vierneusel, Bernd ; Benker, Lisa ; Tremmel, Stephan ; Göken, Mathias ; Merle, Benoit:
Isolating the effect of residual stresses on coating wear by a mechanical stress relaxation technique.
In: Thin Solid Films. Vol. 638 (30 September 2017) . - pp. 159-166.
DOI: https://doi.org/10.1016/j.tsf.2017.06.016

Volltext
Herold, Heike M. ; Scheibel, Thomas:
Applicability of biotechnologically produced insect silks.
In: Zeitschrift für Naturforschung C. Vol. 72 (26 September 2017) Issue 9-10 . - p. 365. - 21 S..
DOI: https://doi.org/10.1515/znc-2017-0050

Isakin, Olga ; Schneider, Ralph ; Ringl, Michael ; Struck, Oliver ; Gerdes, Thorsten ; Willert-Porada, Monika ; Moos, Ralf:
High-yield synthesis of ZnO nanoparticles homogeneously coated on exfoliated graphite and simplified method to determine the surface coverage.
In: Surface and Coatings Technology. Vol. 325 (25 September 2017) . - pp. 445-453.
DOI: https://doi.org/10.1016/j.surfcoat.2017.07.002

Zöllner, Christian ; Brüggemann, Dieter:
Optical and Analytical Studies on DPF Soot Properties and Consequences for Regeneration Behavior.
In: SAE Technical Paper. (4 September 2017) . - No. 2017-24-0126.
DOI: https://doi.org/10.4271/2017-24-0126

Kuboth, Sebastian ; Neubert, Marc ; Preißinger, Markus ; Brüggemann, Dieter:
Iterative Approach for the Design of an Organic Rankine Cycle based on Thermodynamic Process Simulations and a Small-Scale Test Rig.
In: Energy Procedia. Vol. 129 (September 2017) . - pp. 18-25.
DOI: https://doi.org/10.1016/j.egypro.2017.09.167

Heberle, Florian ; Hofer, Markus ; Brüggemann, Dieter:
A Retrofit for Geothermal Organic Rankine Cycles based on Concentrated Solar Thermal Systems.
In: Energy Procedia. Vol. 129 (September 2017) . - pp. 692-699.
DOI: https://doi.org/10.1016/j.egypro.2017.09.148

Welzl, Matthias ; Heberle, Florian ; Brüggemann, Dieter:
Simultaneous experimental investigation of nucleate boiling heat transfer and power output in ORC using R245fa and R1233zd(E).
In: Energy Procedia. Vol. 129 (September 2017) . - pp. 435-442.
DOI: https://doi.org/10.1016/j.egypro.2017.09.113

Eller, Tim ; Heberle, Florian ; Brüggemann, Dieter:
Techno-economic analysis of novel working fluid pairs for the Kalina cycle.
In: Energy Procedia. Vol. 129 (September 2017) . - pp. 113-120.
DOI: https://doi.org/10.1016/j.egypro.2017.09.175

Gomes, Bruna Ferreira ; da Silva, Pollyana Ferreira ; Lobo, Carlos Manuel Silva ; Santos, Maiara da Silva ; Colnago, Luiz Alberto:
Strong magnetoelectrolysis effect during electrochemical reaction monitored in situ by high-resolution NMR spectroscopy.
In: Analytica Chimica Acta. Vol. 983 (August 2017) . - pp. 91-95.
DOI: https://doi.org/10.1016/j.aca.2017.06.008

Motroniuk, Iurii ; Królak, Radoslaw ; Stöber, Ralf ; Fischerauer, Gerhard:
Wireless Communication-Based State Estimation of Automotive Aftertreatment Systems.
In: Measurement. Vol. 106 (August 2017) . - pp. 245-250.
DOI: https://doi.org/10.1016/j.measurement.2016.08.004

Volltext

Volltext
Rommel, Daniel ; Terock, Michael ; Scherm, Florian ; Kuttner, Christian ; Glatzel, Uwe:
Direct metal deposition of abrasive tracks—Potentials concerning geometry and materials.
In: Journal of Laser Applications. Vol. 29 (21 May 2017) Issue 2 . - 022508. - 9 S..
DOI: https://doi.org/10.2351/1.4983230

El-Nagar, Gumaa A. ; Derr, Igor ; Fetyan, Abdulmonem ; Roth, Christina:
One-pot synthesis of a high performance chitosan-nickel oxyhydroxide nanocomposite for glucose fuel cell and electro-sensing applications.
In: Applied Catalysis B: Environmental. Vol. 204 (May 2017) . - pp. 185-199.
DOI: https://doi.org/10.1016/j.apcatb.2016.11.031

Marian, Max ; Weschta, Martin ; Tremmel, Stephan ; Wartzack, Sandro:
Simulation of Microtextured Surfaces in Starved EHL Contacts Using Commercial FE Software.
In: Materials Performance and Characterization. Vol. 6 (May 2017) Issue 2 . - pp. 165-181.
DOI: https://doi.org/10.1520/MPC20160010

Volltext
Kleinschrodt, Claudia ; Marczinski, Götz ; Preis, Dominique:
Aufbau einer Informationslieferkette für Präzisionswerkzeuge mit harmonisierten Standards.
In: Wissenschaft trifft Praxis. Vol. 7 (April 2017) . - pp. 15-23.

Wilhelm, Franz ; Affeldt, Ernst ; Fleischmann, Ernst ; Glatzel, Uwe ; Hammer, Joachim:
Modeling of the Deformation Behavior of Single Crystalline Nickel-Based Superalloys under Thermal Mechanical Loading.
In: International Journal of Fatigue. Vol. 97 (April 2017) . - pp. 1-8.
DOI: https://doi.org/10.1016/j.ijfatigue.2016.12.003

Kirschen, Marcus ; Zettl, Karl-Michael ; Echterhof, Thomas ; Pfeifer, Herbert:
Models for EAF energy efficiency.
In: Steel Times International. (April 2017) . - pp. 44-46.

Bauer, Marius ; Rieger, Bernhard ; Schindler, Stefan ; Keil, Peter ; Wachtler, Mario ; Danzer, Michael A. ; Jossen, Andreas:
Multi-phase formation induced by kinetic limitations in graphite-based lithium-ion cells : Analyzing the effects on dilation and voltage response.
In: Journal of Energy Storage. Vol. 10 (April 2017) . - pp. 1-10.
DOI: https://doi.org/10.1016/j.est.2016.11.006

Volltext
Barroso, Gilvan S. ; Li, Quan ; Motz, Günter ; Bordia, Rajendra K.:
Polymer-derived ceramic and ceramic-like coatings : innovative solutions for real problems.
In: American Ceramic Society Bulletin. Vol. 96 (April 2017) Issue 3 . - pp. 42-49.

Volltext
Dietrich, Markus ; Steiner, Carsten ; Hagen, Gunter ; Moos, Ralf:
Radio-Frequency-Based Urea Dosing Control for Diesel Engines with Ammonia SCR Catalysts.
In: SAE International Journal of Engines. Vol. 10 (28 March 2017) Issue 4 . - pp. 1638-1645.
DOI: https://doi.org/10.4271/2017-01-0945

Linhares, Felipe Nunes ; Kersch, Michaela ; Niebergall, Ute ; Leite, Marcia Christina Amorim Moreira ; Altstädt, Volker ; Furtado, Cristina Russi Guimarães:
Effect of different sulphur-based crosslink networks on the nitrile rubber resistance to biodiesel.
In: Fuel. Vol. 191 (1 March 2017) . - pp. 130-139.
DOI: https://doi.org/10.1016/j.fuel.2016.11.060

Feulner, Markus ; Seufert, Florian ; Müller, Andreas ; Hagen, Gunter ; Moos, Ralf:
Influencing Parameters on the Microwave-Based Soot Load Determination of Diesel Particulate Filters.
In: Topics in Catalysis. Vol. 60 (March 2017) Issue 3 . - pp. 374-380.
DOI: https://doi.org/10.1007/s11244-016-0626-7

Rauch, Dieter ; Dietrich, Markus ; Simon, Ulrich ; Porch, Adrian ; Moos, Ralf:
Microwave Cavity Perturbation Studies on H-form and Cu Ion-Exchanged SCR Catalyst Materials : Correlation of Ammonia Storage and Dielectric Properties.
In: Topics in Catalysis. Vol. 60 (March 2017) Issue 3 . - pp. 243-249.
DOI: https://doi.org/10.1007/s11244-016-0605-z

Schütt, Mathias ; Gallinger, Martin ; Moos, Ralf:
Particulate Filter Substrates with SCR-Functionality Manufactured by Co-extrusion of Ceramic Substrate and SCR Active Material.
In: Topics in Catalysis. Vol. 60 (March 2017) Issue 3 . - pp. 204-208.
DOI: https://doi.org/10.1007/s11244-016-0598-7

Adametz, Patrick ; Pötzinger, Christian ; Müller, Stefan ; Müller, Karsten ; Preißinger, Markus ; Lechner, Raphael ; Brüggemann, Dieter ; Brautsch, Markus ; Arlt, Wolfgang:
Thermodynamic Evaluation and Carbon Footprint Analysis of the Application of Hydrogen-Based Energy-Storage Systems in Residential Buildings.
In: Energy Technology. Vol. 5 (March 2017) Issue 3 . - pp. 495-509.
DOI: https://doi.org/10.1002/ente.201600388

Feulner, Markus ; Hagen, Gunter ; Hottner, Kathrin ; Redel, Sabrina ; Müller, Andreas ; Moos, Ralf:
Comparative Study of Different Methods for Soot Sensing and Filter Monitoring in Diesel Exhausts.
In: Sensors. Vol. 17 (18 February 2017) Issue 2 . - Artikelnummer 400.
DOI: https://doi.org/10.3390/s17020400

Bahrami, Ronak ; Löbling, Tina I. ; Schmalz, Holger ; Müller, Axel H. E. ; Altstädt, Volker:
Synergistic effects of Janus particles and triblock terpolymers on toughness of immiscible polymer blends.
In: Polymer. Vol. 109 (27 January 2017) . - pp. 229-237.
DOI: https://doi.org/10.1016/j.polymer.2016.12.044

Hein, Moritz ; Stöber, Ralf ; Meiler, Michael ; Schaller, Daniel ; Zehle, Rebecca ; Fischerauer, Gerhard ; Bauer, Jochen ; Bürner, Johannes ; Franke, Jörg ; Becher, Thomas ; Feller, Martin ; Maul, Joachim:
Sensor solutions for an energy-efficient and user-centered heating system.
In: Journal of Sensors and Sensor Systems. Vol. 6 (23 January 2017) Issue 1 . - pp. 27-35.
DOI: https://doi.org/10.5194/jsss-6-27-2017

Eller, Tim ; Heberle, Florian ; Brüggemann, Dieter:
Second law analysis of novel working fluid pairs for waste heat recovery by the Kalina cycle.
In: Energy. Vol. 119 (15 January 2017) . - pp. 188-198.
DOI: https://doi.org/10.1016/j.energy.2016.12.081

Volltext
Schönauer-Kamin, Daniela ; Li, Yongxiang ; Wlodarski, Wojtek ; Ippolito, Samuel ; Moos, Ralf:
2D SnS2 – A Material for Impedance-Based Low Temperature NOx Sensing?
In: Proceedings. Vol. 1 (2017) Issue 4 . - p. 455.
DOI: https://doi.org/10.3390/proceedings1040455

Kirillova, Alina ; Maxson, Ridge ; Stoychev, Georgi ; Gomillion, Cheryl T. ; Ionov, Leonid:
4D Biofabrication Using Shape-Morphing Hydrogels.
In: Advanced Materials. Vol. 29 (2017) Issue 46 . - No. 1703443.
DOI: https://doi.org/10.1002/adma.201703443

Stoychev, Georgi ; Razavi, Mir Jalil ; Wang, Xianqiao ; Ionov, Leonid:
4D Origami by Smart Embroidery.
In: Macromolecular Rapid Communications. Vol. 38 (2017) Issue 18 . - No. 1700213.
DOI: https://doi.org/10.1002/marc.201700213

Volltext
Schubert, Michaela ; Kita, Jaroslaw ; Münch, Christian ; Moos, Ralf:
Analysis of the characteristics of thick-film NTC thermistor devices manufactured by screen-printing and firing technique and by room temperature aerosol deposition method (ADM).
In: Functional Materials Letters. Vol. 10 (2017) Issue 6 . - No. 1750073.
DOI: https://doi.org/10.1142/S1793604717500734

Pogorelov, Evgeny ; Kundin, Julia ; Fleck, Michael:
Analysis of the dependence of spinodal decomposition in nanoparticles on boundary reaction rate and free energy of mixing.
In: Computational Materials Science. Vol. 140 (2017) . - pp. 105-112.
DOI: https://doi.org/10.1016/j.commatsci.2017.08.028

Schötz, Sebastian ; Butzer, Steffen ; Molenda, Paul ; Drews, Tom ; Steinhilper, Rolf:
An Approach Towards an Adaptive Quality Assurance.
In: Procedia CIRP. Vol. 63 (2017) . - pp. 189-194.
DOI: https://doi.org/10.1016/j.procir.2017.03.096

Tremmel, Stephan ; Winkler, Andreas:
Auslegungsgrundlage für die axiale Belastbarkeit von mittels Spannhülsen auf glatten Wellen befestigten Wälzlagern.
In: Konstruktion. Vol. 69 (2017) Issue 5 . - pp. 78-85.

El-Nagar, Gumaa A. ; Derr, Igor ; Kottakkat, Tintula ; Roth, Christina:
Auspicious Metal-Doped-Cu2O/Cu Dendrite (M=Ni, Co, Fe) Catalysts for Direct Alkaline Fuel Cells: Effect of Dopants.
In: ECS Transactions. Vol. 80 (2017) Issue 8 . - pp. 1013-1022.
DOI: https://doi.org/10.1149/08008.1013ecst

Standau, Tobias ; Göttermann, Svenja ; Weinmann, Sandra ; Bonten, Christian ; Altstädt, Volker:
Autoclave foaming of chemically modified polylactide.
In: Journal of Cellular Plastics. Vol. 53 (2017) Issue 5 . - pp. 481-489.
DOI: https://doi.org/10.1177/0021955X16670588

Helbig, Christoph ; Kolotzek, Christoph ; Thorenz, Andrea ; Reller, Armin ; Tuma, Axel ; Schafnitzel, Mario ; Krohns, Stephan:
Benefits of resource strategy for sustainable materials research and development.
In: Sustainable Materials and Technologies. Vol. 12 (2017) . - pp. 1-8.
DOI: https://doi.org/10.1016/j.susmat.2017.01.004

Volltext
Klumpen, Christoph ; Radakovitsch, Florian ; Jess, Andreas ; Senker, Jürgen:
BILP-19 - An Ultramicroporous Organic Network with Exceptional Carbon Dioxide Uptake.
In: Molecules. Vol. 22 (2017) Issue 8 . - No. 1343.
DOI: https://doi.org/10.3390/molecules22081343

Golser, Adrian V. ; Scheibel, Thomas:
Biotechnological production of the mussel byssus derived collagen preColD.
In: RSC Advances. (2017) Issue 61 .
DOI: https://doi.org/10.1039/c7ra04515h

Kandlbinder, Christoph ; Fischerauer, Alice ; Mösch, Mario ; Helling, Tobias ; Fischerauer, Gerhard ; Siegl, Martin:
Capacitive gas-phase detection in liquid nitrogen.
In: Journal of Sensors and Sensor Systems. Vol. 6 (2017) Issue 1 . - pp. 135-143.
DOI: https://doi.org/10.5194/jsss-6-135-2017

Raup, Alexander ; Wang, Hui ; Synatschke, Christopher V. ; Jérôme, Valérie ; Agarwal, Seema ; Pergushov, Dmitry V. ; Müller, Axel H. E. ; Freitag, Ruth:
Compaction and transmembrane delivery of pDNA : differences between l-PEI and two types of amphiphilic block copolymers.
In: Biomacromolecules. Vol. 18 (2017) Issue 3 . - pp. 808-818.
DOI: https://doi.org/10.1021/acs.biomac.6b01678

Jérôme, Valérie ; Thoring, Lena ; Salzig, Denise ; Kubick, Stefan ; Freitag, Ruth:
Comparison of cell-based vs. cell-free mammalian systems for the production of a recombinant human bone morphogenic growth factor.
In: Engineering in Life Sciences. (2017) .
DOI: https://doi.org/10.1002/elsc.201700005

König-Haagen, Andreas ; Franquet, Erwin ; Pernot, Eric ; Brüggemann, Dieter:
A comprehensive benchmark of fixed-grid methods for the modeling of melting.
In: International Journal of Thermal Sciences. Vol. 118 (2017) . - pp. 69-103.
DOI: https://doi.org/10.1016/j.ijthermalsci.2017.04.008

Jérôme, Valérie ; Werner, Melanie ; Kaiser, Patrick ; Freitag, Ruth:
Creating a Biomimetic Microenvironment for the Ex Vivo Expansion of Primary Human T Lymphocytes.
In: Macromolecular Bioscience. Vol. 17 (2017) Issue 9 . - No. 1700091.
DOI: https://doi.org/10.1002/mabi.201700091

Volltext
Militzer, Christian ; Knohl, Stefan ; Dzhagan, Volodymyr ; Zahn, Dietrich R. T. ; Goedel, Werner A.:
Deposition of an organic-inorganic hybrid material onto carbon fibers via the introduction of furfuryl alcohol into the atomic layer depostion process of titania and subsequent pyrolysis.
In: Journal of Vacuum Science & Technology A. Vol. 35 (2017) Issue 1 . - 01B107. - 14 S..
DOI: https://doi.org/10.1116/1.4965699

Schmid, Manuela ; Schadeck, Ulrich ; Willert-Porada, Monika:
Development of silica based coatings on zinc particles for improved oxidation behavior in battery applications.
In: Surface and Coatings Technology. Vol. 310 (2017) . - pp. 51-58.
DOI: https://doi.org/10.1016/j.surfcoat.2016.12.044

Kleinschrodt, Claudia ; Hackenschmidt, Reinhard ; Rieg, Frank:
Digitale Werkzeuge für die digitale Fabrik.
In: Future Manufacturing. (2017) Issue 4 . - pp. 12-13.

Volltext
Ritter, Thomas ; Hagen, Gunter ; Moos, Ralf:
Direct Catalyst Conversion Sensor in Form of a Single Self-Heated Mixed-Potential Device.
In: Proceedings. Vol. 1 (2017) Issue 4 . - No. 424.
DOI: https://doi.org/10.3390/proceedings1040424

Weiß, Alexandra ; Schindler, Stefan ; Galbiati, Samuele ; Danzer, Michael A. ; Zeis, Roswitha:
Distribution of Relaxation Times Analysis of High-Temperature PEM Fuel Cell Impedance Spectra.
In: Electrochimica Acta. Vol. 230 (2017) .
DOI: https://doi.org/10.1016/j.electacta.2017.02.011

Lentz, Claudia ; Jand, Sara Panahian ; Melke, Julia ; Roth, Christina ; Kaghazchi, Payam:
DRIFTS study of CO adsorption on Pt nanoparticles supported by DFT calculations.
In: Journal of Molecular Catalysis A: Chemical. Vol. 426 (2017) . - pp. 1-9.
DOI: https://doi.org/10.1016/j.molcata.2016.10.002

Göttermann, Svenja ; Standau, Tobias ; Weinmann, Sandra ; Altstädt, Volker ; Bonten, Christian:
Effect of chemical modification on the thermal and rheological properties of polylactide.
In: Polymer Engineering and Science. Vol. 57 (2017) Issue 11 . - pp. 1242-1251.
DOI: https://doi.org/10.1002/pen.24505

Raguzin, Ivan ; Choudhury, Soumyadip ; Simon, Frank ; Stamm, Manfred ; Ionov, Leonid:
Effect of Current Collector on Performance of Li-S Batteries.
In: Advanced Materials Interfaces. Vol. 4 (2017) Issue 3 . - No. 1600811.
DOI: https://doi.org/10.1002/admi.201600811

Choudhury, Soumyadip ; Azizi, M. ; Raguzin, Ivan ; Göbel, M. ; Michel, S. ; Simon, Frank ; Willomitzer, A. ; Mechtcherine, V. ; Stamm, Manfred ; Ionov, Leonid:
Effect of fibrous separators on the performance of lithium-sulfur batteries.
In: Physical Chemistry Chemical Physics. Vol. 19 (2017) Issue 18 . - pp. 11239-11248.
DOI: https://doi.org/10.1039/C7CP00310B

Castro, L. D. C. ; Oliveira, A. D. ; Kersch, M. ; Altstädt, Volker ; Pessan, L. A.:
Effect of organoclay incorporation and blending protocol on performance of PA6/ABS nanocomposites compatibilized with SANMA.
In: Polymer Engineering and Science. Vol. 57 (2017) Issue 10 . - pp. 1147-1154.
DOI: https://doi.org/10.1002/pen.24493

Schubert, Michael ; Hahn, Manuel ; Exner, Jörg ; Kita, Jaroslaw ; Moos, Ralf:
Effect of substrate hardness and surface roughness on the film formation of aerosol-deposited ceramic films.
In: Functional Materials Letters. Vol. 10 (2017) Issue 4 . - No. 1750045.
DOI: https://doi.org/10.1142/S179360471750045X

El-Nagar, Gumaa A. ; Sarhan, Radwan M. ; Abouserie, Ahed ; Maticiuc, Natalia ; Bargheer, Matias ; Lauermann, Iver ; Roth, Christina:
Efficient 3D-Silver Flower-like Microstructures for Non-Enzymatic Hydrogen Peroxide (H₂O₂) Amperometric Detection.
In: Scientific Reports. Vol. 7 (2017) . - No. 12181.
DOI: https://doi.org/10.1038/s41598-017-11965-9

El-Nagar, Gumaa A. ; Hassan, Mohamed A. ; Lauermann, Iver ; Roth, Christina:
Efficient Direct Formic Acid Fuel Cells (DFAFCs) Anode Derived from Seafood waste : Migration Mechanism.
In: Scientific Reports. Vol. 7 (2017) . - No. 17818.
DOI: https://doi.org/10.1038/s41598-017-17978-8

Marian, Max ; Weschta, Martin ; Tremmel, Stephan ; Wartzack, Sandro:
Einfluss masseerhaltender Kavitationsmodelle bei der Simulation hydro- und elastohydrodynamischer Kontakte.
In: Tribologie und Schmierungstechnik. Vol. 64 (2017) Issue 4 . - pp. 29-34.

Derr, Igor ; Fetyan, Abdulmonem ; Schutjajew, Konstantin ; Roth, Christina:
Electrochemical analysis of the performance loss in all vanadium redox flow batteries using different cut-off voltages.
In: Electrochimica Acta. Vol. 224 (2017) . - pp. 9-16.
DOI: https://doi.org/10.1016/j.electacta.2016.12.043

Kaiser, Patrick ; Reich, Steffen ; Leykam, Daniel ; Willert-Porada, Monika ; Greiner, Andreas ; Freitag, Ruth:
Electrogenic Single-Species Biocomposites as Anodes for Microbial Fuel Cells.
In: Macromolecular Bioscience. Vol. 17 (2017) Issue 7 . - No. 1600442.
DOI: https://doi.org/10.1002/mabi.201600442

Derr, Igor ; Przyrembel, Daniel ; Schweer, Jakob ; Fetyan, Abdulmonem ; Langner, Joachim ; Melke, Julia ; Weinelt, Martin ; Roth, Christina:
Electroless chemical aging of carbon felt electrodes for the all-vanadium redox flow battery (VRFB) investigated by Electrochemical Impedance and X-ray Photoelectron Spectroscopy.
In: Electrochimica Acta. Vol. 246 (2017) . - pp. 783-793.
DOI: https://doi.org/10.1016/j.electacta.2017.06.050

El-Nagar, Gumaa A. ; Roth, Christina:
Enhanced electrooxidation of glucose at nano-chitosan–NiOOH modified GC electrode : fuel blends and hydrocarbon impurities.
In: Physical Chemistry Chemical Physics. Vol. 19 (2017) Issue 3 . - pp. 2537-2548.
DOI: https://doi.org/10.1039/C6CP08360A

Volltext
Ojha, Binayak ; Hagen, Gunter ; Kohler, Heinz ; Moos, Ralf:
Exhaust Gas Analysis of Firewood Combustion Processes : Application of a Robust Thermoelectric Gas Sensor.
In: Proceedings. Vol. 1 (2017) Issue 4 . - p. 457.
DOI: https://doi.org/10.3390/proceedings1040457

Müller, Matthias ; Tremmel, Stephan:
An Experimental Study regarding Maintainability of a Rolling Bearing Arrangement Equipped with a Ring Lubricator for Oil Supply.
In: Bearing World Journal. Vol. 2 (2017) . - pp. 25-34.

Cimprich, Alexander ; Young, Steven B. ; Helbig, Christoph ; Gemechu, Eskinder D. ; Thorenz, Andrea ; Tuma, Axel ; Sonnemann, Guido:
Extension of geopolitical supply risk methodology : Characterization model applied to conventional and electric vehicles.
In: Journal of Cleaner Production. Vol. 162 (2017) . - pp. 754-763.
DOI: https://doi.org/10.1016/j.jclepro.2017.06.063

Volltext
Bertleff, Benjamin ; Claußnitzer, Johannes ; Korth, Wolfgang ; Wasserscheid, Peter ; Jess, Andreas ; Albert, Jakob:
Extraction Coupled Oxidative Desulfurization of Fuels to Sulfate and Water-Soluble Sulfur Compounds Using Polyoxometalate Catalysts and Molecular Oxygen.
In: ACS Sustainable Chemistry & Engineering. Vol. 5 (2017) Issue 5 . - pp. 4110-4118.
DOI: https://doi.org/10.1021/acssuschemeng.7b00087

Anton, Arthur Markus ; Heidebrecht, Aniela ; Mahmood, Nasir ; Beiner, Mario ; Scheibel, Thomas ; Kremer, Friedrich:
Foundation of the Outstanding Toughness in Biomimetic and Natural Spider Silk.
In: Biomacromolecules. Vol. 18 (2017) Issue 12 . - pp. 3954-3962.
DOI: https://doi.org/10.1021/acs.biomac.7b00990

Muench, Falk ; Sun, Luwan ; Kottakkat, Tintula ; Antoni, Markus ; Schaefer, Sandra ; Kunz, Ulrike ; Molina-Luna, Leopoldo ; Duerrschnabel, Michael ; Kleebe, Hans-Joachim ; Ayata, Sevda ; Roth, Christina ; Ensinger, Wolfgang:
Free-Standing Networks of Core-Shell Metal and Metal Oxide Nanotubes for Glucose Sensing.
In: ACS Applied Materials & Interfaces. Vol. 9 (2017) Issue 1 . - pp. 771-781.
DOI: https://doi.org/10.1021/acsami.6b13979

Kayarkatte, Manoj Krishna ; Delikaya, Öznur ; Roth, Christina:
Freestanding Catalyst Layers : A Novel Electrode Fabrication Technique for PEM Fuel Cells via Electrospinning.
In: ChemElectroChem. Vol. 4 (2017) Issue 2 . - pp. 404-411.
DOI: https://doi.org/10.1002/celc.201600530

Kropka, Michael ; Mühlbacher, Mathias ; Neumeyer, Thomas ; Altstädt, Volker:
From UD-tape to Final Part : A Comprehensive Approach Towards Thermoplastic Composites.
In: Procedia CIRP. Vol. 66 (2017) . - pp. 96-100.
DOI: https://doi.org/10.1016/j.procir.2017.03.371

Volltext
Heberle, Florian ; Brüggemann, Dieter ; Weiß, Andreas P. ; Grundemann, Laura:
Geothermische Kraftwerke in Deutschland : Individuelle Lösungen durch die geeignete Wahl des Arbeitsmediums.
In: BWK : Das Energie-Fachmagazin. Vol. 69 (2017) Issue 6 . - pp. 51-54.

Schwöbel, Johannes A. H. ; Preißinger, Markus ; Brüggemann, Dieter ; Klamt, Andreas:
High-Throughput Screening of Working Fluids for the Organic Rankine Cycle (ORC) Based on Conductor-like Screening Model for Realistic Solvation (COSMO-RS) and Thermodynamic Process Simulations.
In: Industrial & Engineering Chemistry Research. Vol. 56 (2017) Issue 3 . - pp. 788-798.
DOI: https://doi.org/10.1021/acs.iecr.6b03857

Engelbrecht, Andreas ; Hämmerle, Martin ; Moos, Ralf ; Fleischer, Maximilian ; Schmid, Günter:
Improvement of the selectivity of the electrochemical conversion of CO₂ to hydrocarbons using cupreous electrodes with in-situ oxidation by oxygen.
In: Electrochimica Acta. Vol. 224 (2017) . - pp. 642-648.
DOI: https://doi.org/10.1016/j.electacta.2016.12.059

Dai, Jixiang ; Sha, Jianjun ; Shao, Junqi ; Zu, Yufei ; Lei, Mingkai ; Flauder, Stefan ; Langhof, Nico ; Krenkel, Walter:
In-situ growth of SiC nanostructures and their influence on anti-oxidation capability of C/SiC composites.
In: Corrosion Science. Vol. 124 (2017) . - pp. 71-79.
DOI: https://doi.org/10.1016/j.corsci.2017.05.008

Reichert, Florian ; Pérez-Mas, Ana ; Barreda, Daniel ; Blanco, Clara ; Santamaria, Ricardo ; Kuttner, Christian ; Fery, Andreas ; Langhof, Nico ; Krenkel, Walter:
Influence of the carbonization temperature on the mechanical properties of thermoplastic polymer derived C/C-SiC composites.
In: Journal of the European Ceramic Society. Vol. 37 (2017) Issue 2 . - pp. 523-529.
DOI: https://doi.org/10.1016/j.jeurceramsoc.2016.09.005

Shi, Yuan ; Hausherr, Jan-Marcel ; Hoffmann, Hendrik ; Koch, Dietmar:
Inspection of geometry influence and fiber orientation to characteristic value for short fiber reinforced ceramic matrix composite under bending load.
In: Journal of the European Ceramic Society. Vol. 37 (2017) Issue 4 . - pp. 1291-1303.
DOI: https://doi.org/10.1016/j.jeurceramsoc.2016.11.042

Li, Jiahao ; Greye, Benjamin ; Buchholz, Michael ; Danzer, Michael A.:
Interval method for an efficient state of charge and capacity estimation of multicell batteries.
In: Journal of Energy Storage. Vol. 13 (2017) . - pp. 1-9.
DOI: https://doi.org/10.1016/j.est.2017.05.012

Schäffer, Johannes ; Alber, Monika ; Korth, Wolfgang ; Cokoja, Mirza ; Jess, Andreas:
Ionic Liquids as Micellar Agents in Perrhenate-catalysed Olefin Epoxidation.
In: ChemistrySelect. Vol. 2 (2017) Issue 35 . - pp. 11891-11898.
DOI: https://doi.org/10.1002/slct.201702709

Freitag, Anne ; Langklotz, Ulrike ; Rost, Axel ; Stamm, Manfred ; Ionov, Leonid:
Ionically conductive polymer/ceramic separator for lithium-sulfur batteries.
In: Energy Storage Materials. Vol. 9 (2017) . - pp. 105-111.
DOI: https://doi.org/10.1016/j.ensm.2017.05.014

Volltext
Kandlbinder, Christoph ; Fischerauer, Alice ; Mösch, Mario ; Helling, Tobias ; Fischerauer, Gerhard ; Siegl, Martin:
Kapazitive Messungen in Zweiphasengemischen am Beispiel von kryogenem Stickstoff.
In: Technisches Messen. Vol. 84 (2017) Issue 6 . - pp. 389-400.
DOI: https://doi.org/10.1515/teme-2016-0080

Chow, Catrin ; Rosemann, Bernd:
Kompakte Vorteile : Das Brikettieren zur Aufbereitung von Schleifschlämmen schont Kosten, Ressourcen und Umwelt.
In: ReSource. Vol. 30 (2017) Issue 2 . - pp. 25-29.

Rieg, Frank ; Billenstein, Daniel ; Dinkel, Christian:
Kontaktsimulation in der Antriebstechnik.
In: Newsletter Wissenschaftliche Gesellschaft für Produktentwicklung, WiGeP. (2017) Issue 1 . - p. 22.

Gabriel, Tobias ; Rommel, Daniel ; Scherm, Florian ; Gorywoda, Marek ; Glatzel, Uwe:
Laser Cladding of Ultra-Thin Nickel-Based Superalloy Sheets.
In: Materials. Vol. 10 (2017) Issue 3 .
DOI: https://doi.org/10.3390/ma10030279

Nießner, Norbert ; Altstädt, Volker ; Neumeyer, Thomas:
Luftig leichte Styrol-Kunststoffe : Optimiertes ABS-Schaumspritzgießen für Leichtgewichtbauteile.
In: Kunststoffe. Vol. 107 (2017) Issue 2 . - pp. 73-76.

Grünewald, Jonas ; Parlevliet, Patricia ; Altstädt, Volker:
Manufacturing of thermoplastic composite sandwich structures : A review of literature.
In: Journal of Thermoplastic Composite Materials. Vol. 30 (2017) Issue 4 . - pp. 437-464.
DOI: https://doi.org/10.1177/0892705715604681

Lang, Gregor ; Neugirg, Benedikt R. ; Kluge, Daniel ; Fery, Andreas ; Scheibel, Thomas:
Mechanical Testing of Engineered Spider Silk Filaments Provides Insights into Molecular Features on a Mesoscale.
In: ACS Applied Materials & Interfaces. Vol. 9 (2017) Issue 1 . - pp. 892-900.
DOI: https://doi.org/10.1021/acsami.6b13093

Haider, Matthäus ; Kirschen, Marcus ; Ude, Roland ; Zettl, Karl-Michael:
Moderne Bodenspülstrategien und -techniken verbessern Konverterprozesse : BOF process improvements by modern gas purging strategy and technology.
In: Stahl und Eisen. Vol. 137 (2017) Issue 9 . - pp. 39-44.

Butzer, Steffen ; Kemnitzer, Jan ; Kunz, Stefan ; Pietzonka, Markus ; Steinhilper, Rolf:
Modular Simulation Model for Remanufacturing Operations.
In: Procedia CIRP. Vol. 62 (2017) . - pp. 170-174.
DOI: https://doi.org/10.1016/j.procir.2016.06.012

Röder, Fridolin ; Braatz, Richard D. ; Krewer, Ulrike:
Multi-Scale Simulation of Heterogeneous Surface Film Growth Mechanisms in Lithium-Ion Batteries.
In: Journal of the Electrochemical Society. Vol. 164 (2017) Issue 11 . - S. E3335-E3344.
DOI: https://doi.org/10.1149/2.0241711jes

Harting, Nina ; Wolff, Nicolas ; Röder, Fridolin ; Krewer, Ulrike:
Nonlinear Frequency Response Analysis (NFRA) of Lithium-Ion Batteries.
In: Electrochimica Acta. Vol. 248 (2017) . - pp. 133-139.
DOI: https://doi.org/10.1016/j.electacta.2017.04.037

Volltext
Riberio, Luis ; Flores, Octavio ; Furtat, Plinio ; Gervais, Christel ; Kempe, Rhett ; Machado, R. A. F. ; Motz, Günter:
A novel PAN/silazane hybrid polymer for processing of carbon-based fibres with extraordinary oxidation resistance.
In: Journal of Materials Chemistry A. Vol. 5 (2017) Issue 2 . - pp. 720-729.
DOI: https://doi.org/10.1039/c6ta09293d

Kuboth, Sebastian ; König-Haagen, Andreas ; Brüggemann, Dieter:
Numerical Analysis of Shell-and-Tube Type Latent Thermal Energy Storage Performance with Different Arrangements of Circular Fins.
In: Energies. Vol. 10 (2017) Issue 3 . - No. 274.
DOI: https://doi.org/10.3390/en10030274

Goodarzi Hosseinabadi, Hossein ; Bagheri, Amir Reza ; Altstädt, Volker:
A numerical approach to study the post-yield softening in cellular solids : role of microstructural ordering and cell size distribution.
In: Acta Mechanica. Vol. 228 (2017) . - pp. 2005-2016.
DOI: https://doi.org/10.1007/s00707-017-1802-y

Kasibhatla, Raghavendra Rohith ; König-Haagen, Andreas ; Rösler, Fabian ; Brüggemann, Dieter:
Numerical modelling of melting and settling of an encapsulated PCM using variable viscosity.
In: Heat and Mass Transfer. Vol. 53 (2017) . - pp. 1735-1744.
DOI: https://doi.org/10.1007/s00231-016-1932-0

Volltext
Bogner, Andreas ; Steiner, Carsten ; Walter, Stefanie ; Kita, Jaroslaw ; Hagen, Gunter ; Moos, Ralf:
Planar Microstrip Ring Resonator Structure for Gas Sensing and Humidity Sensing Purposes.
In: Proceedings. Vol. 1 (2017) Issue 4 . - No. 414.
DOI: https://doi.org/10.3390/proceedings1040414

Volltext
Bogner, Andreas ; Steiner, Carsten ; Walter, Stefanie ; Kita, Jaroslaw ; Hagen, Gunter ; Moos, Ralf:
Planar Microstrip Ring Resonators for Microwave-Based Gas Sensing : Design Aspects and Initial Transducers for Humidity and Ammonia Sensing.
In: Sensors. Vol. 17 (2017) Issue 10 . - No. 2422.
DOI: https://doi.org/10.3390/s17102422

Apsite, Indra ; Stoychev, Georgi ; Zhang, Weizhong ; Jehnichen, Dieter ; Xie, Jin ; Ionov, Leonid:
Porous stimuli-responsive self-folding electrospun mats for 4D biofabrication.
In: Biomacromolecules. Vol. 18 (2017) Issue 10 . - pp. 3178-3184.
DOI: https://doi.org/10.1021/acs.biomac.7b00829

Spielmann, Verena ; Wenzel, Heinz ; Beck, H.-P. ; Danzer, Michael A. ; Gitis, Alxander ; Klabunde, Christian ; Klee Barillas, Joaquin ; Kneiske, Tanja ; Koring, Karolina ; Lux, Stephan ; Moskalenko, Natalia ; Naumann, Maik:
Potenziale elektrochemischer Speicher : Flexibilität im künftigen Stromversorgungssystem.
In: ew : das Magazin für die Energiewirtschaft. (2017) Issue 3 . - pp. 56-59.

El-Nagar, Gumaa A. ; Hassan, Mohamed A. ; Fetyan, Abdulmonem ; Kayarkatte, Manoj Krishna ; Lauermann, Iver ; Roth, Christina:
A promising N-doped carbon-metal oxide hybrid electrocatalyst derived from crustacean's shells : Oxygen reduction and oxygen evolution.
In: Applied Catalysis B: Environmental. Vol. 214 (2017) . - pp. 137-147.
DOI: https://doi.org/10.1016/j.apcatb.2017.05.030

Volltext
Exner, Jörg ; Albrecht, Gaby ; Schönauer-Kamin, Daniela ; Kita, Jaroslaw ; Moos, Ralf:
Pulsed Polarization-Based NOₓ Sensors of YSZ Films Produced by the Aerosol Deposition Method and by Screen-Printing.
In: Sensors. Vol. 17 (2017) Issue 8 . - No. 1715.
DOI: https://doi.org/10.3390/s17081715

Volltext
Anke, Marie-Luise ; Hämmerle, Martin ; Gerchau, Jörg ; Moos, Ralf ; Jess, Andreas:
Radio Frequency-Based In Situ Determination of the Mass Loss of Supported Ionic Liquids.
In: Chemical Engineering & Technology. Vol. 40 (2017) Issue 9 . - pp. 1660-1665.
DOI: https://doi.org/10.1002/ceat.201700190

Dietrich, Markus ; Hagen, Gunter ; Reitmeier, Willibald ; Burger, Katharina ; Hien, Markus ; Grass, Philippe ; Kubinski, David J. ; Visser, Jacobus H. ; Moos, Ralf:
Radio-Frequency-Based NH₃-Selective Catalytic Reduction Catalyst Control : Studies on Temperature Dependency and Humidity Influences.
In: Sensors. Vol. 17 (2017) Issue 7 . - Article number: 1615.
DOI: https://doi.org/10.3390/s17071615

Volltext
Dietrich, Markus ; Hagen, Gunter ; Reitmeier, Willibald ; Burger, Katharina ; Hien, Markus ; Grass, Philippe ; Kubinski, David J. ; Visser, Jacobus H. ; Moos, Ralf:
Radio-Frequency-Controlled Urea Dosing for NH3-SCR Catalysts : NH3 Storage Influence to Catalyst Performance under Transient Conditions.
In: Sensors. Vol. 17 (2017) Issue 12 . - Article number: 2746.
DOI: https://doi.org/10.3390/s17122746

Thamm, Christopher ; Scheibel, Thomas:
Recombinant Production, Characterization, and Fiber Spinning of an Engineered Short Major Ampullate Spidroin (MaSp1s).
In: Biomacromolecules. Vol. 18 (2017) Issue 4 . - pp. 1365-1372.
DOI: https://doi.org/10.1021/acs.biomac.7b00090

DeSimone, Elise ; Schacht, Kristin ; Pellert, Alexandra ; Scheibel, Thomas:
Recombinant spider silk-based bioinks.
In: Biofabrication. Vol. 9 (2017) Issue 4 . - No. 044104.
DOI: https://doi.org/10.1088/1758-5090/aa90db

Ionov, Leonid ; Stoychev, Georgi ; Jehnichen, Dieter ; Sommer, Jens Uwe:
Reversibly Actuating Solid Janus Polymeric Fibers.
In: ACS Applied Materials & Interfaces. Vol. 9 (2017) Issue 5 . - pp. 4873-4881.
DOI: https://doi.org/10.1021/acsami.6b13084

Raps, Daniel ; Köppl, Thomas ; Heymann, Lutz ; Altstädt, Volker:
Rheological behaviour of a high-melt-strength polypropylene at elevated pressure and gas loading for foaming purposes.
In: Rheologica Acta. Vol. 56 (2017) . - pp. 95-111.
DOI: https://doi.org/10.1007/s00397-016-0988-6

Zeiler, Rico ; Kuttner, Christian ; Khalid, Ubaid ; Kothmann, Martin H. ; Dijkstra, Dirk J. ; Altstädt, Volker:
The role of multi‐walled carbon nanotubes in epoxy nanocomposites and resin transfer molded glass fiber hybrid composites : Dispersion, local distribution, thermal, and fracture/mechanical properties.
In: Polymer Composites. Vol. 38 (2017) Issue 9 . - pp. 1849-1863.
DOI: https://doi.org/10.1002/pc.23755

Schnucklake, Maike ; Kuecken, Sophie ; Fetyan, Abdulmonem ; Schmidt, Johannes ; Thomas, Arne ; Roth, Christina:
Salt-templated porous carbon–carbon composite electrodes for application in vanadium redox flow batteries.
In: Journal of Materials Chemistry A. Vol. 5 (2017) Issue 48 . - pp. 25193-25199.
DOI: https://doi.org/10.1039/C7TA07759A

Volltext
Barth, Theresa ; Korth, Wolfgang ; Jess, Andreas:
Selectivity-Enhancing Effect of a SCILL Catalyst in Butadiene Hydrogenation.
In: Chemical Engineering & Technology. Vol. 40 (2017) Issue 2 . - pp. 395-404.
DOI: https://doi.org/10.1002/ceat.201600140

Ritter, Thomas ; Hagen, Gunter ; Kita, Jaroslaw ; Wiegärtner, Sven ; Schubert, Franz ; Moos, Ralf:
Self-heated HTCC-based ceramic disc for mixed potential sensors and for direct conversion sensors for automotive catalysts.
In: Sensors and Actuators B: Chemical. Vol. 248 (2017) . - pp. 793-802.
DOI: https://doi.org/10.1016/j.snb.2016.11.079

Volltext
Kita, Jaroslaw ; Hagen, Gunter ; Schmitt, Christopher ; Moos, Ralf:
Sensitivity Improvement of Thermoelectric Hydrocarbon Sensors : Combination of Glass-Ceramic Tapes and Alumina Substrates.
In: Proceedings. Vol. 1 (2017) Issue 4 . - No. 403.
DOI: https://doi.org/10.3390/proceedings1040403

Hagen, Gunter ; Leupold, Nico ; Wiegärtner, Sven ; Moos, Ralf:
Sensor Tool for Fast Catalyst Material Characterization.
In: Topics in Catalysis. Vol. 60 (2017) Issue 3 . - pp. 312-317.
DOI: https://doi.org/10.1007/s11244-016-0617-8

Freitag, Anne ; Stamm, Manfred ; Ionov, Leonid:
Separator for lithium-sulfur battery based on polymer blend membrane.
In: Journal of Power Sources. Vol. 363 (2017) . - pp. 384-391.
DOI: https://doi.org/10.1016/j.jpowsour.2017.07.077

Volltext
Ritter, Thomas ; Wiegärtner, Sven ; Hagen, Gunter ; Moos, Ralf:
Simulation of a thermoelectric gas sensor that determines hydrocarbon concentrations in exhausts and the light-off temperature of catalyst materials.
In: Journal of Sensors and Sensor Systems. Vol. 6 (2017) Issue 2 . - pp. 395-405.
DOI: https://doi.org/10.5194/jsss-6-395-2017

Molenda, Paul ; Drews, Tom ; Oechsle, Oliver ; Butzer, Steffen ; Schötz, Sebastian ; Steinhilper, Rolf:
A Simulation-Based Framework for the Economic Evaluation of Flexible Manufacturing Systems.
In: Procedia CIRP. Vol. 63 (2017) . - pp. 201-206.
DOI: https://doi.org/10.1016/j.procir.2017.02.039

Lenze, Georg ; Röder, Fridolin ; Bockholt, Henrike ; Haselrieder, Wolfgang ; Kwade, Arno ; Krewer, Ulrike:
Simulation-Supported Analysis of Calendering Impacts on the Performance of Lithium-Ion-Batteries.
In: Journal of the Electrochemical Society. Vol. 164 (2017) Issue 6 . - S. A1223-A1233.
DOI: https://doi.org/10.1149/2.1141706jes

Daab, Matthias ; Loch, Patrick ; Milius, Wolfgang ; Schönauer-Kamin, Daniela ; Schubert, Michaela ; Wunder, Anja ; Moos, Ralf ; Wagner, Friedrich E. ; Breu, Josef:
Single-Crystal Structure and Electronic Conductivity of Melt Synthesized Fe-rich, near End-Member Ferro-Kinoshitalite.
In: Zeitschrift für anorganische und allgemeine Chemie. Vol. 643 (2017) Issue 21 . - pp. 1661-1667.
DOI: https://doi.org/10.1002/zaac.201700265

Jokisch, Stephan ; Scheibel, Thomas:
Spider silk foam coating of fabric.
In: Pure and Applied Chemistry. Vol. 89 (2017) Issue 12 . - pp. 1769-1776.
DOI: https://doi.org/10.1515/pac-2017-0601

Jiang, Shaohua ; Duan, Gaigai ; Kuhn, Ute ; Mörl, Michaela ; Altstädt, Volker ; Yarin, Alexander L. ; Greiner, Andreas:
Spongy Gels by a Top‐Down Approach from Polymer Fibrous Sponges.
In: Angewandte Chemie International Edition. Vol. 56 (2017) Issue 12 . - pp. 3285-3288.
DOI: https://doi.org/10.1002/anie.201611787

Jiang, Shaohua ; Duan, Gaigai ; Kuhn, Ute ; Mörl, Michaela ; Altstädt, Volker ; Yarin, Alexander L. ; Greiner, Andreas:
Spongy Gels by a Top‐Down Approach from Polymer Fibrous Sponges.
In: Angewandte Chemie. Vol. 129 (2017) Issue 12 . - pp. 3333-3336.
DOI: https://doi.org/10.1002/ange.201611787

Kauffmann-Weiss, Sandra ; Häßler, Wolfgang ; Guenther, Elisabeth ; Scheiter, Juliane ; Denneler, Stefan ; Glosse, Philipp ; Berthold, Thomas ; Oomen, Marijn ; Arndt, Tabea ; Stöcker, Thomas ; Hanft, Dominik ; Moos, Ralf ; Weiss, Moshe ; Weis, Frederik ; Holzapfel, Bernhard:
Superconducting properties of thick films on Hastelloy prepared by the Aerosol Deposition Method with ex situ MgB2 powder.
In: IEEE Transactions on Applied Superconductivity. Vol. 27 (2017) Issue 4 . - No. 6200904.
DOI: https://doi.org/10.1109/TASC.2017.2669479

Petzold, Jana ; Aigner, Tamara B. ; Touska, Filip ; Zimmermann, Katharina ; Engel, Felix B. ; Scheibel, Thomas:
Surface Features of Recombinant Spider Silk Protein eADF4(κ16)-Made Materials are Well-Suited for Cardiac Tissue Engineering.
In: Advanced Functional Materials. Vol. 27 (2017) Issue 36 . - No. 1701427.
DOI: https://doi.org/10.1002/adfm.201701427

Borkner, Christian B. ; Wohlrab, Stefanie ; Möller, Eva ; Lang, Gregor ; Scheibel, Thomas:
Surface Modification of Polymeric Biomaterials Using Recombinant Spider Silk Proteins.
In: ACS Biomaterials Science & Engineering. Vol. 3 (2017) Issue 5 . - pp. 767-775.
DOI: https://doi.org/10.1021/acsbiomaterials.6b00306

Lenz-Leite, Mateus ; Barroso, Gilvan S. ; Parchovianský, Milan ; Galusek, Dušan ; Ionescu, Emanuel ; Krenkel, Walter ; Motz, Günter:
Synthesis and characterization of yttrium and ytterbium silicates from their oxides and an oligosilazane by the PDC route for coating applications to protect Si₃N₄ in hot gas environments.
In: Journal of the European Ceramic Society. Vol. 37 (2017) Issue 16 . - pp. 5177-5191.
DOI: https://doi.org/10.1016/j.jeurceramsoc.2017.04.034

Dai, Jixiang ; Sha, Jianjun ; Zu, Yufei ; Shao, Junqi ; Lei, Mingkai ; Flauder, Stefan ; Langhof, Nico ; Krenkel, Walter:
Synthesis and growth mechanism of SiC nanofibres on carbon fabrics.
In: CrystEngComm. Vol. 19 (2017) Issue 9 . - pp. 1279-1285.
DOI: https://doi.org/10.1039/C6CE02602H

Volltext
Moser, Massimo ; Pregger, Thomas ; Simon, Sonja ; König, Daniel H. ; Wörner, Antje ; Dietrich, Ralph-Uwe ; Köhler, Markus ; Oßwald, Patrick ; Grohmann, Jasper ; Kathrotia, Trupti ; Eckel, Georg ; Schweitzer, Daniel ; Armbrust, Nina ; Dieter, Heiko ; Scheffknecht, Günter ; Kern, Christoph ; Thiessen, Johannes ; Jess, Andreas ; Aigner, Manfred:
Synthetische flüssige Kohlenwasserstoffe aus erneuerbaren Energien – Ergebnisse der Helmholtz Energieallianz = Synthetic Liquid Hydrocarbons from Renewable Energy – Results of the Helmholtz Energy Alliance.
In: Chemie Ingenieur Technik. Vol. 89 (2017) Issue 3 . - pp. 274-288.
DOI: https://doi.org/10.1002/cite.201500154

Stahlschmidt, Ullrich ; Jérôme, Valérie ; Majewski, Alexander P. ; Müller, Axel H. E. ; Freitag, Ruth:
Systematic Study of a Library of PDMAEMA-Based, Superparamagnetic Nano-Stars for the Transfection of CHO-K1 Cells.
In: Polymers. Vol. 9 (2017) Issue 5 .
DOI: https://doi.org/10.3390/polym9050156

Volltext

Moss, Tobias ; Paulus, Ilka E. ; Raps, Daniel ; Altstädt, Volker ; Greiner, Andreas:
Ultralight sponges of poly(para-xylylene) by template-assisted chemical vapour deposition.
In: e-Polymers. Vol. 17 (2017) Issue 4 . - pp. 255-261.
DOI: https://doi.org/10.1515/epoly-2016-0329

Kropka, Michael ; Selvaraj, Karthick ; Neumeyer, Thomas ; Altstädt, Volker:
Vom UD-Tape zum thermoplastischen Faserverbundprodukt.
In: Lightweight Design. Vol. 10 (2017) . - pp. 14-19.
DOI: https://doi.org/10.1007/s35725-017-0018-3

Volltext
Dauth, Markus ; Schörner, Mario ; Aksel, Nuri:
What makes the free surface waves over topographies convex or concave? : A study with Fourier analysis and particle tracking.
In: Physics of Fluids. Vol. 29 (2017) Issue 9 . - No. 092108.
DOI: https://doi.org/10.1063/1.5003574

Akstaller, Wolfgang ; Musolff, Christian ; Weigel, Robert ; Hagelauer, Amelie:
X-Parameter Characterization of TC SAW Filters with Enhanced Dynamic Range.
In: IEEE Transactions on Microwave Theory and Techniques. Vol. 65 (2017) Issue 11 . - pp. 4541-4549.
DOI: https://doi.org/10.1109/TMTT.2017.2751464

Sha, J. J. ; Li, J. ; Lv, Z. Z. ; Wang, S. H. ; Zhang, Z. F. ; Zu, Yufei ; Flauder, Stefan ; Krenkel, Walter:
ZrB₂-based composites toughened by as-reiceived and heat-treated short carbon fibers.
In: Journal of the European Ceramic Society. Vol. 37 (2017) Issue 2 . - pp. 549-558.
DOI: https://doi.org/10.1016/j.jeurceramsoc.2016.09.012

Volltext
Dobrenizki, Ladislaus ; Tremmel, Stephan ; Wartzack, Sandro ; Hoffmann, Dennis Christopher ; Brögelmann, Tobias ; Bobzin, Kirsten ; Bagcivan, Nazlim ; Musayev, Yashar ; Hosenfeldt, Tim:
Efficiency improvement in automobile bucket tappet/camshaft contacts by DLC coatings - Influence of engine oil, temperature and camshaft speed.
In: Surface and Coatings Technology. Vol. 308 (25 December 2016) . - pp. 360-373.
DOI: https://doi.org/10.1016/j.surfcoat.2016.09.041

Helfricht, Nicolas ; Doblhofer, Elena ; Bieber, Vera ; Lommes, Petra ; Sieber, Volker ; Scheibel, Thomas ; Papastavrou, Georg:
Probing the adhesion properties of alginate hydrogels : a new approach towards the preparation of soft colloidal probes for direct force measurements.
In: Soft Matter. (15 December 2016) .
DOI: https://doi.org/10.1039/C6SM02326F

Kleineidam, Gerhard ; Krasser, Marco ; Reischböck, Markus:
The cellular approach : smart energy region Wunsiedel ; Testbed for smart grid, smart metering and smart home solutions.
In: Electrical Engineering. Vol. 98 (December 2016) Issue 4 . - pp. 335-340.
DOI: https://doi.org/10.1007/s00202-016-0417-y

Rosemann, Bernd ; Thäter, Stefan ; Höfling, Felix:
CO2 Recovery : lowering costs and protecting the environment.
In: Brauwelt international. (December 2016) Issue 6 . - pp. 407-410.

Hein, Moritz ; Stöber, Ralf ; Fischerauer, Gerhard ; Bürner, Johannes ; Franke, Jörg ; Feller, Martin ; Maul, Joachim:
Smart Heating System for Old Buildings : an Approach to the Decentralized Use of Renewable Energies.
In: Advanced Engineering Forum. Vol. 19 (December 2016) . - pp. 20-26.
DOI: https://doi.org/10.4028/www.scientific.net/AEF.19.20

DeSimone, Elise ; Schacht, Kristin ; Scheibel, Thomas:
Cations influence the cross-linking of hydrogels made of recombinant, polyanionic spider silk proteins.
In: Materials Letters. Vol. 183 (15 November 2016) . - pp. 101-104.
DOI: https://doi.org/10.1016/j.matlet.2016.07.044

Preißinger, Markus ; Schatz, Sabrina ; Vogl, Anne ; König-Haagen, Andreas ; Brüggemann, Dieter:
Thermoeconomic analysis of configuration methods for modular Organic Rankine Cycle units in low-temperature applications.
In: Energy Conversion and Management. Vol. 127 (1 November 2016) . - pp. 25-34.
DOI: https://doi.org/10.1016/j.enconman.2016.08.092

Heberle, Florian ; Schifflechner, Christopher ; Brüggemann, Dieter:
Life cycle assessment of Organic Rankine Cycles for geothermal power generation considering low-GWP working fluids.
In: Geothermics. Vol. 64 (November 2016) . - 392 - 400.
DOI: https://doi.org/10.1016/j.geothermics.2016.06.010

Królak, Radoslaw ; Fischerauer, Gerhard:
Q-Factor Estimation From the Return Loss of Low-Q Microwave Resonators.
In: IEEE Transactions on Microwave Theory and Techniques. Vol. 64 (November 2016) Issue 11 . - pp. 3797-3808.
DOI: https://doi.org/10.1109/TMTT.2016.2605673

Volltext
Bauer, Joschka ; Scheibel, Thomas:
Die Schwarze Witwe und ihre Künste.
In: Spektrum. Vol. 12 (November 2016) Issue 2 . - pp. 60-63.

Volltext
Seifert, Martin ; Motz, Günter:
Synthesis and high-temperature oxidation of a polymer-derived Mo-SiN based ceramic composite.
In: Journal of the European Ceramic Society. Vol. 36 (November 2016) Issue 15 . - p. 3601.
DOI: https://doi.org/10.1016/j.jeurceramsoc.2016.05.009

Mertel, Robert ; Konrad, Christian ; Terock, Michael ; Völkl, Rainer ; Glatzel, Uwe:
Internal oxidation of ternary alloys forming a high oxygen conductive oxide.
In: Oxidation of Metals. Vol. 86 (October 2016) Issue 3 . - pp. 193-203.
DOI: https://doi.org/10.1007/s11085-016-9631-2

Bürner, Johannes ; Kleineidam, Gerhard ; Braun, Thomas ; Skibbe, Alexander ; Franke, Jörg:
SmartEco : An Approach Using Electric Storage Heaters for Demand Side Management.
In: Advanced Engineering Forum. Vol. 19 (October 2016) . - pp. 27-34.
DOI: https://doi.org/10.4028/www.scientific.net/AEF.19.27

Bauer, Joschka ; Schaal, Daniel ; Eisoldt, Lukas ; Schweimer, Kristian ; Schwarzinger, Stephan ; Scheibel, Thomas:
Acidic Residues Control the Dimerization of the N-terminal Domain of Black Widow Spiders' Major Ampullate Spidroin 1.
In: Scientific Reports. Vol. 6 (29 September 2016) . - Art.Nr. 34442.
DOI: https://doi.org/10.1038/srep34442

Derr, Igor ; Bruns, Michael ; Langner, Joachim ; Fetyan, Abdulmonem ; Melke, Julia ; Roth, Christina:
Degradation of all-vanadium redox flow batteries (VRFB) investigated by electrochemical impedance and X-ray photoelectron spectroscopy. Part 2: Electrochemical degradation.
In: Journal of Power Sources. Vol. 325 (September 2016) . - pp. 351-359.
DOI: https://doi.org/10.1016/j.jpowsour.2016.06.040

Kersch, M. ; Schmidt, Hans-Werner ; Altstädt, Volker:
Influence of different beta-nucleating agents on the morphology of isotactic polypropylene and their toughening effectiveness.
In: Polymer. Vol. 98 (19 August 2016) . - pp. 320-326.
DOI: https://doi.org/10.1016/j.polymer.2016.06.051

Haynl, Christian ; Hofmann, Eddie ; Pawar, Kiran ; Förster, Stephan ; Scheibel, Thomas:
Microfluidics-Produced Collagen Fibers Show Extraordinary Mechanical Properties.
In: Nano Letters. (11 August 2016) .
DOI: https://doi.org/10.1021/acs.nanolett.6b02828

NKhonjera, Lameck ; Kuboth, Matthias ; König-Haagen, Andreas ; John, Geoffrey ; King’ondu, Cecil ; Brüggemann, Dieter ; Bello-Ochende, Tunde:
Experimental Investigation of a Finned Pentaerythritol-based Heat Storage Unit for Solar Cooking at 150-200 ̊C.
In: Energy Procedia. Vol. 93 (August 2016) . - pp. 160-167.
DOI: https://doi.org/10.1016/j.egypro.2016.07.165

Helfricht, Nicolas ; Doblhofer, Elena ; Duval, Jérôme F. L. ; Scheibel, Thomas ; Papastavrou, Georg:
Colloidal Properties of Recombinant Spider Silk Protein Particles.
In: The Journal of Physical Chemistry C. Vol. 120 (12 July 2016) Issue 32 . - pp. 18015-18027.
DOI: https://doi.org/10.1021/acs.jpcc.6b03957

Hardy, John G. ; Torres-Rendon, Jose Guillermo ; Leal-Egaña, Aldo ; Walther, Andreas ; Schlaad, Helmut ; Cölfen, Helmut ; Scheibel, Thomas:
Biomineralization of Engineered Spider Silk Protein-Based Composite Materials for Bone Tissue Engineering.
In: Materials. Vol. 9 (11 July 2016) Issue 7 . - n° 560, 13 Seiten.
DOI: https://doi.org/10.3390/ma9070560

Bärwinkel, Mark ; Lorenz, Sebastian ; Stäglich, Robert ; Brüggemann, Dieter:
Influence of focal point properties on energy transfer and plasma evolution during laser ignition process with a passively q-switched laser.
In: Optics Express. Vol. 24 (11 July 2016) Issue 14 . - pp. 15189-15203.
DOI: https://doi.org/10.1364/OE.24.015189

Brieger, Claudia ; Melke, Julia ; van der Bosch, Nils ; Reinholz, Uwe ; Riesemeier, Heinrich ; Guilherme Buzanich, Ana ; Kayarkatte, Manoj Krishna ; Derr, Igor ; Schökel, Alexander ; Roth, Christina:
A combined in-situ XAS–DRIFTS study unraveling adsorbate induced changes on the Pt nanoparticle structure.
In: Journal of Catalysis. Vol. 339 (July 2016) . - pp. 57-67.
DOI: https://doi.org/10.1016/j.jcat.2016.03.034

Fedoseeva, Alexandra ; Dudova, Nadya ; Glatzel, Uwe ; Kaibyshev, Rustam:
Effect of W on Tempering Behaviour of a 3 %Co Modified P92 Steel.
In: Journal of Materials Science. Vol. 51 (July 2016) Issue 20 . - pp. 9424-9439.
DOI: https://doi.org/10.1007/s10853-016-0188-x

Langner, Joachim ; Bruns, Michael ; Dixon, Ditty ; Nefedov, Alexei A. ; Wöll, Christof ; Scheiba, Frieder ; Ehrenberg, Helmut ; Roth, Christina ; Melke, Julia:
Surface properties and graphitization of polyacrylonitrile based fiber electrodes affecting the negative half-cell reaction in vanadium redox flow batteries.
In: Journal of Power Sources. Vol. 321 (July 2016) . - pp. 210-218.
DOI: https://doi.org/10.1016/j.jpowsour.2016.04.128

Fischerauer, Gerhard ; Dickert, Franz L.:
A simple model for the effect of nonuniform mass loading on the response of gravimetric chemical sensors.
In: Sensors and Actuators B: Chemical. Vol. 229 (28 June 2016) . - pp. 618-626.
DOI: https://doi.org/10.1016/j.snb.2016.01.070

Invernizzi, Costante M. ; Iora, Paolo ; Preißinger, Markus ; Manzolini, Giampaolo:
HFOs as substitute for R-134a as working fluids in ORC power plants : A thermodynamic assessment and thermal stability analysis.
In: Applied Thermal Engineering. Vol. 103 (25 June 2016) . - 790 - 797.
DOI: https://doi.org/10.1016/j.applthermaleng.2016.04.101

Rathgeber, Christoph ; Hiebler, Stefan ; Lävemann, Eberhard ; Dolado, Pablo ; Lázaro, Ana ; Gasia, Jaume ; de Gracia, Alvaro ; Miró, Laia ; Cabeza, Luisa F. ; König-Haagen, Andreas ; Brüggemann, Dieter ; Campos-Celador, Álvaro ; Franquet, Erwin ; Fumey, Benjamin ; Dannemand, Mark ; Badenhop, Thomas ; Diriken, Jan ; Nielsen, Jan Erik ; Hauer, Andreas:
IEA SHC Task 42 / ECES Annex 29 : A Simple Tool for the Economic Evaluation of Thermal Energy Storages.
In: Energy Procedia. Vol. 91 (June 2016) . - pp. 197-206.
DOI: https://doi.org/10.1016/j.egypro.2016.06.203

Hausner, Josef ; Fischer, Bianca ; Stöter, Matthias ; Edenharter, Andreas ; Schmid, Jasmin ; Kunz, Raphael ; Rosenfeldt, Sabine ; Altstädt, Volker ; Breu, Josef:
Increasing time of ignition for PS-clay nanocomposites filled with [Fe(bpy)₃]²⁺-modified hectorite.
In: Polymer Degradation and Stability. Vol. 128 (June 2016) . - pp. 141-148.
DOI: https://doi.org/10.1016/j.polymdegradstab.2016.03.015

Volltext
Raup, Alexander ; Stahlschmidt, Ullrich ; Jérôme, Valérie ; Synatschke, Christopher V. ; Müller, Axel H. E. ; Freitag, Ruth:
Influence of Polyplex Formation on the Performance of Star-Shaped Polycationic Transfection Agents for Mammalian Cells.
Process Biotechnology, University of Bayreuth, 95440 Bayreuth, Germany; Simpson Querrey Institute for BioNanotechnology, Northwestern University, Chicago, 60611 IL, USA; Institute of Organic Chemistry, Johannes-Gutenberg-University, 55099 Mainz, Germany
In: Polymers. Vol. 8 (June 2016) Issue 6 . - p. 224.
DOI: https://doi.org/10.3390/polym8060224

Bauer, Marius ; Wachtler, Mario ; Stöwe, Hendrik ; Persson, Jon V. ; Danzer, Michael A.:
Understanding the Dilation and Dilation Relaxation Behavior of Graphite-Based Lithium-Ion Cells.
In: Journal of Power Sources. Vol. 317 (June 2016) . - pp. 93-102.
DOI: https://doi.org/10.1016/j.jpowsour.2016.03.078

Pohrer, Benjamin ; Zürcher, Manuel ; Tremmel, Stephan ; Wartzack, Sandra ; Schlücker, Eberhard:
Einfluss des tribochemischen Schichtaufbaus auf die Ausbildung elektrisch induzierter Wälzlagerschäden.
In: Tribologie und Schmierungstechnik. Vol. 63 (May 2016) Issue 5 . - pp. 32-39.

Pérez-González, Francisco A. ; Ramírez-Ramírez, Javier H. ; Terock, Michael ; Garza-Montes-de-Oca, Nelson F. ; Glatzel, Uwe ; Colás, Rafael:
High-temperature Oxidation of a Nickel Base Superalloy at Different Oxygen Partial Pressures.
In: Corrosion Engineering, Science and Technology. Vol. 51 (May 2016) Issue 7 . - pp. 513-521.
DOI: https://doi.org/10.1080/1478422X.2016.1158226

Gomes, Bruna Ferreira ; Burato, Juliana Soares da Silva ; Lobo, Carlos Manuel Silva ; Colnago, Luiz Alberto:
Use of the Relaxometry Technique for Quantification of Paramagnetic Ions in Aqueous Solutions and a Comparison with Other Analytical Methods.
In: International Journal of Analytical Chemistry. Vol. 8 (May 2016) . - No. 8256437..
DOI: https://doi.org/10.1155/2016/8256437

Schreier, Peter ; Mühlbacher, Mathias ; Fafara, Michael ; Neumeyer, Thomas ; Altstädt, Volker:
Sandwichkonzepte auf Basis thermoplastischer Partikelschäume.
In: Plastverarbeiter. (13 April 2016) .

Ladewig, Alexander ; Schlick, Georg ; Fisser, Maximilian ; Schulze, Volker ; Glatzel, Uwe:
Influence of the shielding gas flow on the removal of process by-products in the selective laser melting process.
In: Additive Manufacturing. Vol. 10 (April 2016) . - pp. 1-9.
DOI: https://doi.org/10.1016/j.addma.2016.01.004

Schacht, Kristin ; Vogt, Jessica ; Scheibel, Thomas:
Foams made of enigneered recombinant Spider Silk Proteins as 3D Scaffolds for Cell Growth.
In: ACS Biomaterials Science & Engineering. (4 March 2016) .
DOI: https://doi.org/10.1021/acsbiomaterials.5b00483

Volltext
Simons, Thomas ; Chen, Peirong ; Rauch, Dieter ; Moos, Ralf ; Simon, Ulrich:
Sensing Catalytic Conversion : Simultaneous DRIFT and Impedance Spectroscopy for in situ Monitoring of DeNOx-SCR on Zeolites.
In: Sensors and Actuators B: Chemical. Vol. 224 (1 March 2016) . - pp. 492-499.
DOI: https://doi.org/10.1016/j.snb.2015.10.069

Burow, Daniel ; Sergeeva, Kseniya ; Calles, Simon ; Schorb, Klaus ; Börger, Alexander ; Roth, Christina ; Heitjans, Paul:
Inhomogeneous degradation of graphite anodes in automotive lithium ion batteries under low-temperature pulse cycling conditions.
In: Journal of Power Sources. Vol. 307 (March 2016) . - pp. 806-814.
DOI: https://doi.org/10.1016/j.jpowsour.2016.01.033

Manzoni, Anna M. ; Singh, Sheela ; Daoud, Haneen ; Popp, Robert ; Völkl, Rainer ; Glatzel, Uwe ; Wanderka, Nelia:
On the Path to Optimizing the Al-Co-Cr-Cu-Fe-Ni-Ti High Entropy Alloy Family for High Temperature Applications.
In: Entropy. Vol. 18 (March 2016) Issue 4 . - pp. 104-117.
DOI: https://doi.org/10.3390/e18040104

Neugebauer, Horst ; Kern, Christoph ; Jess, Andreas:
Stadtwerke Rosenheim gehen neue Weg bei der Leckprüfung von Fernwärmenetzen.
In: EuroHeat & Power. (March 2016) Issue 3 . - pp. 42-45.

Raps, Daniel ; Sanchez-Vazquez, Sandra A. ; Heymann, Lutz ; Altstädt, Volker:
Rheology and Crystallization of Polypropylene.
In: G.I.T. Laboratory Journal. (February 2016) . - pp. 42-44.

Schindler, Stefan ; Bauer, Marius ; Petzl, Mathias ; Danzer, Michael A.:
Voltage relaxation and impedance spectroscopy as in-operando methods for the detection of lithium plating on graphitic anodes in commercial lithium-ion cells.
In: Journal of Power Sources. Vol. 304 (February 2016) . - pp. 170-180.
DOI: https://doi.org/10.1016/j.jpowsour.2015.11.044

Lorenz, Sebastian ; Bärwinkel, Mark ; Heinz, Peter ; Mühlbauer, Wolfgang ; Brüggemann, Dieter:
Zündungseigenschaften passiv gütegeschalteter Laserzündkerzen.
In: photonik : Fachzeitschrift für die Optischen Technologien. Vol. 2016 (February 2016) Issue 1 . - pp. 32-35.

Volltext
Schubert, Franz ; Wollenhaupt, Stefan ; Kita, Jaroslaw ; Hagen, Gunter ; Moos, Ralf:
Platform to develop exhaust gas sensors manufactured by glass-solder-supported joining of sintered yttria-stabilized zirconia.
In: Journal of Sensors and Sensor Systems. Vol. 5 (22 January 2016) . - pp. 25-32.
DOI: https://doi.org/10.5194/jsss-5-25-2016

Volltext
Krannich, Michel ; Heym, Florian ; Jess, Andreas:
Continuous Gas Dehydration Using the Hygroscopic Ionic Liquid [EMIM][MeSO₃] as a Promising Alternative Absorbent.
In: Chemical Engineering & Technology. Vol. 39 (12 January 2016) Issue 2 . - pp. 343-353.
DOI: https://doi.org/10.1002/ceat.201500588

Volltext
Pöhlmann, Ferdinand ; Jess, Andreas:
Influence of Syngas Composition on the Kinetics of Fischer–Tropsch Synthesis of using Cobalt as Catalyst.
In: Energy Technology. Vol. 4 (January 2016) Issue 1 . - pp. 55-64.
DOI: https://doi.org/10.1002/ente.v4.1

Volltext
Pricha, Irene ; Rossner, Wolfgang ; Moos, Ralf:
Layered Ceramic Phosphors Based on CaAlSiN3:Eu and YAG:Ce for White Light-Emitting Diodes.
In: Journal of the American Ceramic Society. Vol. 99 (January 2016) . - pp. 211-217.
DOI: https://doi.org/10.1111/jace.13948

Schoekel, Alexander ; Melke, Julia ; Bruns, Michael ; Wippermann, Klaus ; Kuppler, Frank ; Roth, Christina:
Quantitative study of ruthenium cross-over in direct methanol fuel cells during early operation hours.
In: Journal of Power Sources. Vol. 301 (January 2016) . - pp. 210-218.
DOI: https://doi.org/10.1016/j.jpowsour.2015.09.119

Pöhlmann, Ferdinand ; Kern, Christoph ; Rößler, Stefan ; Jess, Andreas:
Accumulation of liquid hydrocarbons in catalyst pores during cobalt-catalyzed Fischer-Tropsch synthesis.
In: Catalysis Science & Technology. Vol. 6 (2016) Issue 17 . - pp. 6593-6604.
DOI: https://doi.org/10.1039/C6CY00941G

Niessner, Norbert ; Altstädt, Volker ; Neumeyer, Thomas:
Acrylnitril-Butadien-Styrol (ABS) : Mit moderatem Wachstum erschließt sich ABS immer mehr Anwendungsgebiete.
In: Kunststoffe. Vol. 106 (2016) Issue 10 . - pp. 96-101.

Stoychev, Georgi ; Ionov, Leonid:
Actuating Fibers : Design and Applications.
In: ACS Applied Materials & Interfaces. Vol. 8 (2016) Issue 37 . - pp. 24281-24294.
DOI: https://doi.org/10.1021/acsami.6b07374

Jahn, Josefine ; Weeber, Max ; Böhner, Johannes ; Steinhilper, Rolf:
Assessment strategies for composite-metal joining technologies : A review.
In: Procedia CIRP. Vol. 50 (2016) . - pp. 689-694.
DOI: https://doi.org/10.1016/j.procir.2016.05.034

Mörl, Stefan ; Kastner, Friedrich ; Grajewski, Franz ; Ludwig, Ernst ; Altstädt, Volker:
Aus Zwei mach Eins : Einstufige Produktion von Polymer-Metall-Hybriden und Organoblechen mittels LamiPreg-Verfahren.
In: Kunststoffe. Vol. 106 (2016) Issue 6 . - pp. 52-54.

Volltext
Kirschen, Marcus ; Ehrengruber, Reinhard ; Zettl, Karl-Michael:
Benefits from Improved Bath Agitation with the Radex DPP Gas Purging System During EAF High-Alloyed and Stainless Steel Production.
In: RHI Bulletin. (2016) Issue 1 . - pp. 8-13.

Dubey, Nidhi Chandrama ; Tripathi, Bijay Prakash ; Müller, Martin ; Stamm, Manfred ; Ionov, Leonid:
Bienzymatic Sequential Reaction on Microgel Particles and Their Cofactor Dependent Applications.
In: Biomacromolecules. Vol. 17 (2016) Issue 5 . - pp. 1610-1620.
DOI: https://doi.org/10.1021/acs.biomac.5b01745

Volltext
Haider, Matthäus ; Gutschier, Gerald ; Schretter, Andreas ; Kirschen, Marcus:
BOF Bottom Purging Efficiency and the Impact of Slag Maintenance with a Case Study from Jindal Steel Works in India.
In: RHI Bulletin. (2016) Issue 1 . - pp. 14-19.

Volltext
Hagen, Gunter ; Feulner, Markus ; Werner, Robin ; Schubert, Michael ; Müller, Andreas ; Riess, Gerald ; Brüggemann, Dieter ; Moos, Ralf:
Capacitive soot sensor for diesel exhausts.
Universität Bayreuth / Lehrstuhl für Funktionsmaterialien
In: Sensors and Actuators B: Chemical. Vol. 236 (2016) . - pp. 1020-1027.
DOI: https://doi.org/10.1016/j.snb.2016.05.006

Volltext
Martínez Molina, Marta ; Kern, Christoph ; Jess, Andreas:
Catalytic Hydrogenation of Carbon Dioxide to Methane in Wall-Cooled Fixed-Bed Reactors‡.
In: Chemical Engineering & Technology. Vol. 39 (2016) Issue 12 . - pp. 2404-2415.
DOI: https://doi.org/10.1002/ceat.201500614

Schierling, Martina ; Doblhofer, Elena ; Scheibel, Thomas:
Cellular uptake of drug loaded spider silk particles.
In: Biomaterials Science. Vol. 4 (2016) Issue 10 . - pp. 1515-1523.
DOI: https://doi.org/10.1039/C6BM00435K

Volltext
Panzer, Fabian ; Hanft, Dominik ; Gujar, Tanaji P. ; Kahle, Frank-Julian ; Thelakkat, Mukundan ; Köhler, Anna ; Moos, Ralf:
Compact Layers of Hybrid Halide Perovskites Fabricated via the Aerosol Deposition Process : Uncoupling Material Synthesis and Layer Formation.
In: Materials. Vol. 9 (2016) Issue 4 . - p. 277.
DOI: https://doi.org/10.3390/ma9040277

Stanzel, Nicolas ; Streule, Thomas ; Preißinger, Markus ; Brüggemann, Dieter:
Comparison of Cooling System Designs for an Exhaust Heat Recovery System Using an Organic Rankine Cycle on a Heavy Duty Truck.
In: Energies. Vol. 9 (2016) Issue 11 . - No. 928.
DOI: https://doi.org/10.3390/en9110928

Bachtin, Krystyna ; Kaus, Maximilian ; Pfaffmann, Lukas ; Indris, Sylvio ; Knapp, Michael ; Roth, Christina ; Ehrenberg, Helmut:
Comparison of electrospun and conventional LiFePO4/C composite cathodes for Li-ion batteries.
In: Materials Science and Engineering B. Vol. 213 (2016) . - pp. 98-104.
DOI: https://doi.org/10.1016/j.mseb.2016.04.006

Stoychev, Georgi ; Reuther, Cordula ; Diez, Stefan ; Ionov, Leonid:
Controlled Retention and Release of Biomolecular Transport Systems Using Shape-Changing Polymer Bilayers.
In: Angewandte Chemie International Edition. Vol. 55 (2016) Issue 52 . - pp. 16106-16109.
DOI: https://doi.org/10.1002/anie.201608299

Mühlbauer, Wolfgang ; Zöllner, Christian ; Lehmann, Sebastian ; Lorenz, Sebastian ; Brüggemann, Dieter:
Correlations between physicochemical properties of emitted diesel particulate matter and its reactivity.
In: Combustion and Flame. Vol. 167 (2016) . - pp. 39-51.
DOI: https://doi.org/10.1016/j.combustflame.2016.02.029

Rosemann, Bernd ; Thäter, Stefan ; Höfling, Felix:
CO₂-Rückgewinnung : Innovatives Rückgewinnungsverfahren soll Kosten und Umweltbelastung verringern.
In: Brauwelt. Vol. 2016 (2016) Issue 42 . - pp. 1220-1223.

Kubota, Yuki ; Fukuda, Kohei ; Hatta, Hiroshi ; Langhof, Nico ; Krenkel, Walter ; Kogo, Yasuo:
Crack development and deformation mechanisms of carbon-fiber-reinforced plastics at elevated temperatures.
In: Engineering Fracture Mechanics. Vol. 153 (2016) . - pp. 244-258.
DOI: https://doi.org/10.1016/j.engfracmech.2015.12.004

Volltext
Gleißner, Michael ; Bakran, Mark-M.:
Design and Control of Fault-Tolerant Nonisolated Multiphase Multilevel DC–DC Converters for Automotive Power Systems.
In: IEEE Transactions on Industry Applications. Vol. 52 (2016) Issue 2 . - pp. 1785-1795.
DOI: https://doi.org/10.1109/TIA.2015.2497218

Volltext
Heining, Christian ; Sellier, Mathieu:
Direct Reconstruction of Three-dimensional Glacier Bedrock and Surface Elevation from Free Surface Velocity.
In: AIMS Geosciences. Vol. 2 (2016) Issue 1 . - pp. 45-63.
DOI: https://doi.org/10.3934/geosciences.2016.1.45

Stolze, Christian ; Janoschka, Tobias ; Schubert, Ulrich S. ; Müller, Frank A. ; Flauder, Stefan:
Directional Solidification with Constant Ice Front Velocity in the Ice-Templating Process.
In: Advanced Engineering Materials. Vol. 18 (2016) Issue 1 . - pp. 111-120.
DOI: https://doi.org/10.1002/adem.201500235

Hofmann, Marius ; Kresse, Benjamin ; Heymann, Lutz ; Privalov, Alexei F. ; Willner, L. ; Fatkullin, Nail ; Aksel, Nuri ; Fujara, F. ; Rößler, Ernst:
Dynamics of a Paradigmatic Linear Polymer : A Proton Field-Cycling NMR Relaxometry Study on Poly(etylene-propylene).
In: Macromolecules. Vol. 49 (2016) Issue 22 . - pp. 8622-8632.
DOI: https://doi.org/10.1021/acs.macromol.6b01906

Volltext
Chen, Peirong ; Rauch, Dieter ; Weide, Philipp ; Schönebaum, Simon ; Simons, Thomas ; Muhler, Martin ; Moos, Ralf ; Simon, Ulrich:
The effect of Cu and Fe cations on NH3-supported proton transport in DeNOx-SCR zeolite catalysts.
Universität Bayreuth / Lehrstuhl für Funktionsmaterialien
In: Catalysis Science & Technology. Vol. 6 (2016) . - pp. 3362-3366.
DOI: https://doi.org/10.1039/C6CY00452K

Castro, L. D. C. ; Oliveira, A. D. ; Kersch, M. ; Altstädt, Volker ; Pessan, L. A.:
Effects of mixing protocol on morphology and properties of PA6/ABS blends compatibilized with MMA‐MA.
In: Journal of Applied Polymer Science. Vol. 133 (2016) Issue 27 .
DOI: https://doi.org/10.1002/app.43612

Weeber, Max ; Frötschner, Björn ; Böhner, Johannes ; Steinhilper, Rolf:
Energy efficiency in assembly systems.
In: Procedia CIRP. Vol. 44 (2016) . - pp. 334-340.
DOI: https://doi.org/10.1016/j.procir.2016.01.021

Ess, Michaela N. ; Bürger, Markus ; Mühlbauer, Wolfgang ; Seher, Simone:
Examination of the Soot Reactivity of Different Diesel Fuels.
In: MTZ worldwide. Vol. 77 (2016) Issue 1 . - pp. 66-71.
DOI: https://doi.org/10.1007/s38313-015-0076-9

Helbig, Christoph ; Gemechu, Eskinder D. ; Pillain, Baptiste ; Young, Steven B. ; Thorenz, Andrea ; Tuma, Axel ; Sonnemann, Guido:
Extending the geopolitical supply risk indicator : Application of life cycle sustainability assessment to the petrochemical supply chain of polyacrylonitrile-based carbon fibers.
In: Journal of Cleaner Production.